Contactor & Overload Relay
Contactor & Overload Relay
Contactor & Overload Relay
Industrial contactors
EW series
Industrial contactors
Hager offers a complete range of contactors for commercial market such as buildings, infrastruc-
tures, etc...
Industrial contactors are used to switch high power circuits and can be controlled by a full
range of control circuits.
• Easy for installation : screw or DIN rail mounted • Rated current: 7A~300A
• Contactor terminals are designed with IP20 degree to ensure • Main pole : 3 Poles
personal safety
• Utilization category: AC3
• Double contacts auxiliary for a reliable action
2
1##+/' )$.+ .
- with overload protection and - choice of auxiliary contacts
phase-failure protection - double contacts design for
- 1NO-1NC, new design of higher reliability.
independent auxiliary contacts, - front and side mounting
easy wiring and reliable action auxiliary contacts
3
designed with IP20 degree
- +$# +'$.-/)
- manual and automatic reset Mechanical interlock protect
function against the risk of short circuit
- front mounted auxiliary contact for reversing and change over
contactors
+#$' )$.+ .
1##+/' )$.+ .
)$.+ .)/'#-
.-/"
NC 0 0
#-$"#)$"'
a 45 45
b 58 58
c 54 54
d 36 36
e 50.5 50.5
').- Control circuit rated operational voltage C: 220V AC 50/60Hz (EW005_C ~ EW006_C) N: 24V AC 50/60Hz (EW005_N ~ EW006_N)
D: 380V AC 50/60Hz (EW005_D ~ EW006_D) P: 48V AC 50/60Hz (EW005_P ~ EW006_P)
H: 110V AC 50/60Hz (EW005_H ~ EW006_H)
4
Designation Characteristics Cat. ref.
2-/+')
-/)+'/-+" Setting range:
h.62 x l.45 x w.60 mm 0.1 - 0.16A 4325501
0.75 - 1A 4325051
1.4 - 2A 4325*51
2.9 - 4A 4325!51
9 - 12.5A 4320*,1
2NC 43150%
4NO 43150!
4NC 43150
EWA405
5
+#$' )$.+ .
Rated insulation voltage Ui (V) 660 660 660
Main contact rated Single pole 110V 8A / 0,37 kW 10.5A / 0.55kW 10.5A / 0.55kW
operational current
AC-3 Ie 220V 7A / 0.75kW 10A / 1.1kW 10A / 1.1kW
1##+/' )$.+ .
Rated insulation voltage Ui (V) 690 690 690
)$.+ .)/'#-
Operation frequency (cycles/hour) 1200 1200 1200
.-/"
Type of auxiliary contact NO 1 1 1
NC 0 0 0
#-$"#)$"'
a 45 45 45
b 70 70 70
c 82 82 82
d 35 35 35
e 55 55 55
).-: Control circuit rated operational voltage %7"$)[ &8@%_&8@% +7"$)[ &8@+_&8@+
&7%$)[ &8@&_&8@&
,7"$)[ &8@,_&8@,
$7"$)[ &8@$_&8@$
'7%$)[ &8@'_&8@'
-7"$)[ &8@-_&8@-
)7"$)[ &8@)_&8@)
.7"$)[ &8@._&8@.
6
4350( 435*5 435*, 435%* 435% 435!5
25 32 35 60 60 60
13.5A / 0.75 kW 19.5A / 1.1kW 25.5A / 1,5kW 35A / 1.5kW 39A / 2.2kW 37A / 2.2kW
14A / 1.5kW 20.5A / 2.2kW 26A / 3kW 35A / 3.73kW 39A / 5kW 33A / 4kW
16A / 4kW 23A / 5.5kW 27A / 7,5kW 35A / 9kW 39A / 11kW 44A / 11kW
16A /7.5kW 22A / 11kW 26A / 11kW 32A / 15kW 38A / 18.5kW 40A / 20kW
15A / 7.5kW 21A / 11kW 21A / 11kW 32A / 15kW 38A / 22kW 40A / 22kW
13A / 7.5kW 19A / 11kW 21A / 11kW 30A / 18.5kW 33A / 22kW 35A / 22kW
10A / 7.5kW 14A / 11kW 19A / 11kW 23A / 18.5kW 25.2A / 22kW 26A / 22kW
6 6 6 6 6 6
3 3 3 3 3 3
1 1 1 1 1 1
0 1 1 1 1 1
45 55 55 55 58 69
70 72 72 72 94.5 99
82 92 92 92 111.7 111.7
35 45 45 45 50 60
55 55 55 55 75 80
7
+#$' )$.+ .
Rated insulation voltage Ui (V) 660 660 660
Main contact rated Single pole 110V - 50A / 3kW 60A / 4kW
operational current
AC-3 Ie 220V - 45A / 6kW 55A / 7.5kW
1##+/' )$.+ .
Rated insulation voltage Ui (V) 660 660 660
)$.+ .)/'#-
Operation frequency (cycles/hour) 1200 1200 1200
.-/"
Type of auxiliary contact NO 2 2 2
NC 2 2 2
#-$"#)$"'
a 93.5 93.5 93.5
d 80 80 80
e 90 90 90
).-: Control circuit rated operational voltage %7"$)[ &8@%_&8@% +7"$)[ &8@+_&8@+
&7%$)[ &8@&_&8@&
,7"$)[ &8@,_&8@,
$7"$)[ &8@$_&8@$
'7%$)[ &8@'_&8@'
-7"$)[ &8@-_&8@-
)7"$)[ &8@)_&8@)
.7"$)[ &8@._&8@.
8
4355 4300, 430% 430,5 4305 43**5 43%55
- - - - - - -
- - - - - - -
85A / 25kW 115A / 30kW 138A / 40kW 150A / 45kW 182A / 55kW 225A / 65kW 300A / 90kW
85A /45kW 115A / 60kW 138A / 75kW 147A / 80kW 179A / 95kW 225A / 120kW 300A / 160kW
85A / 51kW 105A / 60kW 135A / 75kW 131A / 80kW 178A / 100kW 220A / 132kW 300A / 160kW
80A / 55kW 93A / 65kW 105A / 75kW 129A / 90kW 156A / 110kW 190A / 132kW 250A / 160kW
65A / 55kW 75A / 65kW 85A / 75kW 107A / 100kW 118A / 110kW 140A / 132kW 220A / 220kW
6 6 6 6 6 6 6
3 3 3 3 3 3 3
2 2 2 2 2 2 2
2 2 2 2 2 2 2
9
Designation Characteristics Cat. ref.
2-/+')
-/)+'/-+" Setting range:
10
Designation Characteristics Cat. ref.
- +/+.-'.-/+')
-/)+' Setting range:
/-+" 17 - 25A 432*,5
connection with wires
24.5 - 36A 432%(5
35 - 47A 432!5
45 - 60A 432(55
58 - 75A 432,5
//-$.'./+$")/-/" Ratio:
150A / 5A 431(50
250A / 5A 431(5*
EWA501
11
432& 432
6 11 60 15 14.5 58
18.5
11
58
52
12 12
13 13
19.5
72
45 25.7
13 13
48.7
45
72
432 4324
17.5 17.5 74
13 13 63.5
22.5
18.5
55.5
55.5
56 56
432 432
63.5 15 15 74
21 21
22.5
28
55.5
55.5
97.5
17.5 17.5
28.5
56
28.5
17.5 17.5 64.5
56 97.5
13
432
82
17.5 17.5 46
28.5
11
56.5
82
11
28.5
35
17.5 17.5
71
56
104
14
Hager Electro Limited Tel: +(852) 2688 0228
Unit 815, 8/F., Trade Square Fax: +(852) 2688 0336
681 Cheung Shan Wan Road www.hager.hk
Cheung Shan Wan, Kowloon e-mail: sales@hager.hk
Hong Kong