Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 14 views

    Met S20 041 2400 1

    Uploaded by

    Ranganathan Ramesh
    This document is an engineering drawing with revisions for an arm structure. It contains details for the structure including dimensions, tolerances, materials, and notes. The drawing includes 5 views of the structure with labeled dimensions. It also contains a revision table indicating the initial release of the drawing and no revisions made yet.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Met S20 041 2400 1

    Uploaded by

    Ranganathan Ramesh
    14 views1 page
    This document is an engineering drawing with revisions for an arm structure. It contains details for the structure including dimensions, tolerances, materials, and notes. The drawing includes 5 views of the structure with labeled dimensions. It also contains a revision table indicating the initial release of the drawing and no revisions made yet.

    Original Description:

    5

    Original Title

    MET-S20-041-2400-1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is an engineering drawing with revisions for an arm structure. It contains details for the structure including dimensions, tolerances, materials, and notes. The drawing includes 5 views of the structure with labeled dimensions. It also contains a revision table indicating the initial release of the drawing and no revisions made yet.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    14 views1 page

    Met S20 041 2400 1

    Uploaded by

    Ranganathan Ramesh
    This document is an engineering drawing with revisions for an arm structure. It contains details for the structure including dimensions, tolerances, materials, and notes. The drawing includes 5 views of the structure with labeled dimensions. It also contains a revision table indicating the initial release of the drawing and no revisions made yet.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    A B C D E

    CONTROL DE CAMBIOS

    REV. MOTIVO DE EDICIÓN FECHA REALIZADO REVISADO APROBADO

    0 RFQ Drawing 17/09/20 JCG AIN AIN

    1 CQ 1

    Galvanizing 6,00
    drain holes (x4)

    6,00
    CS
    DETAIL CQ
    45
    ,66
    SCALE 1 : 1

    45,6
    °
    2 2

    6
    30,00

    °
    0 CS
    953,54 -1

    1,50

    30,00
    982,85

    3 3
    SECTION CS-CS
    SCALE 1 : 1

    NOTES:

    - General tolerances: 1mm.


    - Main dimensions and tolerances expressed in mm. Angular values expressed in degrees.
    1 - Main dimensions and tolerances are referred to the component after surface coatings and treatments.
    - Roughness values expressed in micron (µm).
    - Dimensions and tolerances between asterisks (*XXX*) must be considered CRITICS.
    - The component must be free of burrs, fissures, cracks, pores and other functional defects.
    - Designation and characteristics of structural steel according to UNE-EN 10025-3 (PNE-prEN 10025-3).
    - The composition of the steel must meet the requirements for its correct galvanization s/ UNE EN ISO 1461. Therefore, they
    should belong to Class 1 of standard UNE-EN 10025-3 (PNE-prEN 10025-3).
    4 - Square/ rectangular profile according to UNE-EN 10219-1.
    -The dimensions of total length and angles correspond to the dimensions necessary for a perfect contact between the different
    components that make up the structure. If, by process, a space is required between the different components, the supplier must
    make this adjustment in the dimensions.The maximum gap between profiles will be 1mm.
    - If galvanizing drain holes larger than specified are required, consult engineering team. 4

    CLIENTE PROYECTO TÍTULO DE PLANO

    MET-S20-041 ESTRUCTURA BRAZO

    ORIGINADOR FORMATO ESCALA CÓDIGO DE PLANO


    MET-S20-041-2400-1
    A3
    1:2 CÓDIGO SUBCONTRATISTA
    REV.
    0

    A B C D E

    You might also like