Horizontal High Pressure Multistage Centrifugal Pumps

OMK SERIES (50 Hz)

ATEX

TECHNICAL MANUAL

Revision No: 01 December/2015

 OMK Series
High Pressure Multistage Pumps
General Specifications Mas Grup

Fields of Application Shaft

For pumping of clear and slightly contaminated liquids Chromium steel (AISI 420) fine grained shafts are used
in: on OMK pumps. There is no big diameter difference
 Water supply systems. along the shaft and it is possible and very easy to
 Booster sets in high rise buildings and industry. dismantling the pump beginning from suction or
 Water treatment. discharge ends.
 Industrial washdown systems. Bearings
 Fire extinguishing plants.
 Boiler feed and condensate transfer.  On both ends, bearing houses equipped with grease
 Sanitary and cleaning installations. lubricated heavy duty ball bearings.
 For industrial applications and public services.  Bearing at the suction side is fixed. Extra axial load is
 Water distribution services. carried by this bearing.
 Industrial applications.  Discharge side bearing is free at the axial direction
 Shipbuilding, Mining, Power Stations, Filter Units. and it carries only radial load.
 Irrigation plants.  Throwers and lip seals on the shaft prevent leakage
 Central heating systems. fluid from getting into bracket.

Pumped Liquids Shaft Seal

Thin, clean, non-aggressive and non-explosive liquids  Uncooled gland packing is standard (Up to 110 °C).
free from solid particles and fibres.
 Standardized, single acting, balanced and uncooled
 Fresh water, potable water, boiler feed water, mechanical seal is optional (Up to 140 °C).
industrial water, sea and brackish water, hot water,
 Double-acting and cartridge seals are upon request.
condensate, lye, etc.
For special applications, please consult to MAS DAF Technical Data
MAKİNA SAN. A.Ş.
Design  Suction Flanges…… : DN 50...DN 125 ( PN 40 )
(DIN 2535)
 The OMK Pump is a horizontal axis, radially split, ring  Discharge Flanges… : DN 32...DN 80 ( PN 40 )
section design multistage centrifugal pump of non-self (DIN 2535)
priming type.  Operating Pressure.. : 40 Bar
 Impellers are between bearings, single entry, closed  No of Stages……….. : 2-14
type and dynamically balanced. Impeller diameter will  Capacity Range…… : 5-220 m³ / h
be corrected for optimal adherence to the required  Head Range……….. : 30-400 m
duty point.  Temp. Range………. : -10..1600C; Mech. Seal
 The axial thrust is relieved by relieving boreholes in :- 10..1100C; Soft packing
each impeller. The remaining thrust can be borne by  Speed up to………. : 3600rpm
large-sized bearings.
 Pumps with exchangeable wear rings are available Shaft Coupling and Coupling Guard
upon request.
 The pump series consists of 5 sizes. OMK 32, 40, 50, Connection of pump with driver unit by flexible coupling
65 and 80. Stages are from 2 up to max. 14 stages. without intermediate bushing. A coupling guard will be
 Pump and motor are fitted on a common base plate included if the scope of supply includes pump, base
and connected to each other via flexible coupling. frame and coupling.
 Flanges are acc. to DIN 2535. Flanges acc. to BS or Driver
ANSI are upon request.
 Normally, discharge part is at motor side on top, Common electric motors according to IEC. Also, OMK
suction part is at dead end side on the right and series can be driven by combustion engines or turbines.
rotation of direction is clockwise when viewed from
Idendification Code for Pump
driver.
 Suction and discharge nozzles may be a choice of
three 90° positions. By special request, it is possible OMK 40 / 12
to put the suction nozzle at the motor side. In this Pump Type
arrangement pump and motor rotation must be
counter clockwise. Discharge Flange Size
Please see the possible arrangements at “Different No of stages
Mounting Arrangements” section.
OMK Series
High Pressure Multistage Pumps
Performance Range – 50 Hz Mas Grup

For 2900 RPM

Model Min Number Max Stages

Designation of Stages 1450 rpm 2900 rpm
OMK 32 2 14 12
OMK 40 2 12 10
OMK 50 2 11 7
OMK 65 2 11 5
OMK 80 2 10 5
OMK Series
High Pressure Multistage Pumps
Sectional Drawing and Part List (Soft Packing Design) Mas Grup

214 35 200 30 60 240 01 69 10 04 20 02 68 210 70 321 67 220 361

360 320 420 54 363 69A 20A 213 212 400 301 211 401 56 300 362 88 322 36

Part List

No No
01 Discharge Casing 210 Key, Sleeve
02 Suction Casing 211 Key, First Stage Impeller
04 Stage Casing With Diffuser 212 Key, Standard Impeller
10 Last Stage Diffuser 213 Key, Last Stage Impeller
20 Impeller 214 Key, Coupling
20A Last Stage Impeller 220 V-Ring
30 Bearing Housing 240 Soft Packing
35 Bearing Cover (Discharge Side) 300 Stud For Gland
36 Bearing Cover ( Suction Side) 301 Casing Stud
54 Gland 320 Bolt, Bearing Cover
56 Lantern Ring 321 Bolt, Bearing House
60 Pump Shaft 322 Bolt, Bearing Cover
67 Space Sleeve 360 Shaft Nut
68 Space Sleeve 361 Shaft Nut
69 Split Ring 363 Nut, Casing Stud
69A Retaining Ring 400 O-Ring (Stage Casing)
70 Seal Sleeve 401 O-Ring (Seal Sleeve)
88 Thrower 420 Supporting Ring
200 Ball Bearing
OMK Series
High Pressure Multistage Pumps
Sectional Drawing and Part List (Mechanical Seal Design) Mas Grup

214 35 200 30 60 58 250 70 01 53 69 10 04 20 02 68 210 321 67 220 361

360 320 420 230 363 69A 20A 213 212 400 301 211 401 402 302 362 321 36

Part List

No No
01 Discharge Casing 212 Key, Standard Impeller
02 Suction Casing 213 Key, Last Stage Impeller
04 Stage Casing With Diffuser 214 Key, Coupling
10 Last Stage Diffuser 220 V-Ring
20 Impeller 230 Safety ring
20A Last Stage Impeller 250 Mechanical Seal
30 Bearing Housing 300 Stud, Gland
35 Bearing Cover (Discharge Side) 301 Casing Stud
36 Bearing Cover ( Suction Side) 302 Mech. Seal Cover Stud
53 Mech. Seal Front Sleeve 320 Bolt, Bearing Cover
58 Mech. Seal Cover 321 Bolt, Bearing
60 Pump Shaft 360 Shaft Nut
67 Space Sleeve 361 Shaft Nut
68 Space Sleeve 362 Stud, Mech. Seal cover
69 Split Ring 363 Nut, Casing Stud
69A Retaining Ring 400 O-Ring (Stage Casing)
70 Seal Sleeve 401 O-Ring (Seal Sleeve)
200 Ball Bearing 402 O-Ring
210 Key, Sleeve 420 Supporting Ring
211 Key, First Stage Impeller
OMK Series
High Pressure Multistage Pumps
ATEX Description Mas Grup
ATEX Codification
ATEX -95
II 2G /D c Tx (85 oC – 200 oC)

TEMPERATURE CLASS
Temperature class
Ignition temperature of Allowable temperature
required by the area
gas or vapor classes of equipment
classification
T1 > 450 °C T1 - T6
T2 > 300 °C T2 - T6
T3 > 200 °C T3 - T6
T4 > 135 °C T4 - T6
T5 > 100 °C T5 - T6
T6 > 85 °C T6

Code Description
II The Usage in other non-mining explosive atmospheres
2 2. Category: High level of protection
G For potentially explosive environments due to gases or vapors
T Temperature class
X ATEX Marking of the motor manufacturer
OMK Series
High Pressure Multistage Pumps
Technical Data Mas Grup

Material Options

2.1050.01
Components Material. No

0.6025

0.7040

1.4021

1.4301

1.4401
Suction & Discharge Casing ● o o o o
Stage Casing With Diffuser ● o o o o
Impeller ● o o o o
Last Stage Diffuser ● o o o o
Gland ● o
Shaft ● o o
Shaft Sleeve ● o o
Mech. Seal Cover ● o o o o ● - Standard Manufacturing
Bearing Housing ● o o - Optional
Bearing Cover ● o o o o

Material Equivalent
Description DIN 17007 EN-DIN ASTM
Cast Iron 0.6025 GJL-250 (GG25) A 48 Class 40-B
Nodular Cast Iron 0.7040 GJS-400-15 (GGG40) A 536 Gr.60-40-18
Cast Bronze 2.1050.01 G-Cu Sn 10 B 584 C 90700
Chrome Steel 1.4021 X20 Cr 13 A 276 Type 420
Chrome Nickel Steel 1.4301 X5 Cr Ni 18.9 A 276 Type 304
Chrome Nickel Molybdenum Steel 1.4401 X5 Cr Ni Mo 18.10 A 276 Type 316

Mechanical Seal Applications

250 74 78 78 67

59 77 250 59
Balanced Mechanical Seal Balanced Mechanical Seal
(Burgmann H12N – Up to 25 Bar) (Burgmann H7N – Up to 40 Bar)
(Dependent on direction of rotation) (Independent on direction of rotation)

59 Mech. Seal Cover 59 Mech. Seal Cover

74 Mech. Seal Front Ring 67 Space Sleeve
77 Retaining Ring 78 Seal Sleeve
78 Seal Sleeve 250 Balanced Mech. Seal
250 Balanced Mech. Seal
OMK Series
High Pressure Multistage Pumps
Technical Data Mas Grup

Soft Packing

Soft Packing Box Soft Packing Box

(Discharge side, standard) (Suction side, standard)

Soft Packing Dimensions

Pump Type OMK 32 OMK 40 OMK 50 OMK 65 OMK 80
ØD 51 51 65 65 85
Ød 35 35 43 45 60
s 8 8 10 10 12

Number of Soft Packing OMK 32 OMK 40 OMK 50 OMK 65 OMK 80

Suction Side 3 + Lant.R 3 + Lant.R 3 + Lant.R 3 + Lant.R 3 + Lantern R.
Discharge Side 5 5 5 5 5

When blocked, the pressure of the sealing medium exceeds the pressure of the pumped medium.
Application examples: pumped media that crystallize or carry solids, causing long-term damage to the seal.

Connector for external block on the pressure Connector for external block, Suction Side
side, Discharge Side (Optional). (Optional).
OMK Series
High Pressure Multistage Pumps
Technical Data Mas Grup

Different Mounting Arrangements

Standard
Manufacturing

Example: SL-DT-CW
(SL: Suction Left - DT : Discharge Top - CW : Rotation Clock Wise)

9
OMK Series
High Pressure Multistage Pumps
Pump Dimension Table Mas Grup
Lp e
a c b DNd

l e
d
hp

DNs
h1

u2 s
g k
K
G
Pump DN s DN d
a b Lp g G u2 h1 e hp d l k K s
Size mm ø mm ø
OMK 32 50 32 190 260 C+450 C+167 C+247 79 150 160 310 25 60 175 220 14
OMK 40 65 40 196 259 C+455 C+170 C+250 85 150 180 330 25 60 175 220 14
OMK 50 80 50 224 304 C+538 C+204 C+286 98 180 210 390 28 70 220 270 19
OMK 65 100 65 229 324 C+553 C+210 C+300 100 200 240 440 32 80 240 290 19
OMK 80 125 80 259 377 C+636 C+258 C+338 121 230 270 500 42 100 270 320 19

Dimension “C” according to the number of stages.

Pump
2 3 4 5 6 7 8 9 10 11 12 13 14
Size
OMK 32 124 178 232 286 340 394 448 502 556 610 664 718 772
OMK 40 133 191 249 307 365 423 481 539 597 655 713
OMK 50 188 266 344 422 500 578 656 734 812 890
OMK 65 193 278 363 448 533 618 703 788 873 958
OMK 80 250 360 470 580 690 800 910 1020 1130
zxØ
DN
zxø
DN
ØT
l ø Df
Ga
ØDf

d
øT
f
B

Shaft End & Key Way Dimensions Flange Dimensions (PN 40)
Pump d l f Ga DN Df T Z ø B
Size mm ø mm mm mm mm ø mm ø mm ø Each mm ø mm
OMK 32 25 60 8 28 DN 32 140 100 4 18 20
OMK 40 25 60 8 28 DN 40 150 110 4 18 20
OMK 50 28 70 8 31 DN 50 165 125 4 18 22
OMK 65 32 80 10 35 DN 65 185 145 8 18 24
OMK 80 42 100 12 45 DN 80 200 160 8 18 26
DN 100 235 190 8 23 28
DN 125 270 220 8 27 30
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 32/2 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 32/3 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 32/4 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 32/5 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 32/6 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 32/7 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 32/8 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 32/9 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 32/10 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 32/11 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 32/12 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 32/13 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 32/14 Mas Grup
OMK Series
High Pressure Multistage Pumps
Dimension Table for OMK 32 – 1450 rpm – 50 Hz Mas Grup

L
Lp Lm
160
190 c 260 ca

8
160

28
H
hm 150
he 25
80 129 hb .

300 80x80 80

s
zxø

Wb Ws W
DN T Df

L4 L5
Lb

Foundation Bolts Flange Dimensions

Hole Dia. (s) Number Dimensions PN DN Df T z ø
19 4 M 16 x 200 Suction 40 50 165 125 4 18
Discharge 40 32 140 100 4 18
Dimensions – 1450 RPM - 50 Hz
MOTOR PUMP Overall Base Plate
Pump
Base
Type KW IEC Lm Hm Lp C ca L W H Lb Wb hb he L4 L5 Ws S
Plate
OMK 32 / 2 0.75 80 273 80 574 124 16 863 330 375 2.03 800 240 65 215 130 540 290 19
0.55 80 273 80 574 124 16 863 330 375 2.03 800 240 65 215 130 540 290 19
32 / 3 1.1 90S 300 90 628 178 20 948 330 375 2.03 800 240 65 215 130 540 290 19
0.75 80 273 80 628 178 16 917 330 375 2.03 800 240 65 215 130 540 290 19
32 / 4 1.5 90L 325 90 682 232 20 1027 330 375 2.04 900 240 65 215 150 600 290 19
1.1 90S 300 90 682 232 20 1002 330 375 2.04 900 240 65 215 150 600 290 19
32 / 5 1.5 90L 325 90 736 286 20 1081 330 375 2.05 1000 240 65 215 170 660 290 19
1.1 90S 300 90 736 286 20 1056 330 375 2.04 900 240 65 215 150 600 290 19
32 / 6 2.2 100L 365 100 790 340 20 1175 330 375 2.06 1120 240 65 215 190 740 290 19
1.5 90L 325 90 790 340 20 1135 330 375 2.05 1000 340 65 215 170 660 270 19
32 / 7 2.2 100L 365 100 844 394 20 1229 330 375 2.06 1120 240 65 215 190 740 290 19
1.5 90L 325 90 844 394 20 1189 330 375 2.06 1120 240 65 215 190 740 290 19
32 / 8 3 100L 365 100 898 448 20 1283 330 375 2.06 1120 240 65 215 190 740 290 19
2.2 100L 365 100 898 448 20 1283 330 375 2.06 1120 240 65 215 190 740 290 19
32 / 9 3 100L 365 100 952 502 20 1337 330 375 2.07 1250 240 65 215 205 840 290 19
2.2 100L 365 100 952 502 20 1337 330 375 2.07 1250 240 65 215 205 840 290 19
32 / 10 3 100L 365 100 1006 556 20 1391 330 375 2.07 1250 240 65 215 205 840 290 19
2.2 100L 365 100 1006 556 20 1391 330 375 2.07 1250 240 65 215 205 840 290 19
32 / 11 4 112M 384 112 1060 610 21 1465 330 375 2.08 1400 240 65 215 230 940 290 19
3 100L 365 100 1060 610 20 1445 330 375 2.08 1400 240 65 215 230 940 290 19
32 / 12 4 112M 384 112 1114 664 21 1519 330 375 2.08 1400 240 65 215 230 940 290 19
3 100L 365 100 1114 664 20 1499 330 375 2.08 1400 240 65 215 230 940 290 19
32 / 13 4 112M 384 112 1168 718 21 1573 330 375 2.08 1400 240 65 215 230 940 290 19
3 100L 365 100 1168 718 20 1553 330 375 2.08 1400 240 65 215 230 940 290 19
32 / 14 5.5 132S 455 132 1222 772 26 1703 360 375 3.09 1600 270 65 215 270 1060 320 19
4 112M 384 112 1222 772 21 1627 330 375 2.09 1600 240 65 215 270 1060 290 19
This leaflet is subject to alteration without notice. Dimensions are in mm without obligation.
OMK Series
High Pressure Multistage Pumps
Dimension Table for OMK 32 – 2900 rpm – 50 Hz Mas Grup

L
Lp Lm
160
190 c 260 ca

8
160

28
H
hm 150
he 25
80 129 hb .

300 80x80 80

s
zxø

Wb Ws W
DN T Df

L4 L5
Lb

Foundation Bolts Flange Dimensions

Hole Dia. (s) Number Dimensions PN DN Df T z ø
19 4 M 16 x 200 Suction 40 50 165 125 4 18
24 4 M 20 x 200 Discharge 40 32 140 100 4 18

Dimensions – 2900 RPM - 50 Hz

MOTOR PUMP Overall Base Plate
Pump
Base
Type KW IEC Lm Hm Lp C ca L W H Lb Wb hb he L4 L5 Ws S
Plate
OMK 32 / 2 5.5 132S 455 132 574 124 21 1050 360 375 3.04 900 270 65 215 150 600 320 19
4 112M 384 112 574 124 20 978 330 375 3.03 800 270 65 215 130 540 320 19
32 / 3 7.5 132S 455 132 628 178 21 1104 360 375 3.04 900 270 65 215 150 600 320 19
5.5 132S 455 132 628 178 21 1104 360 375 3.04 900 270 65 215 150 600 320 19
32 / 4 11 160M 594 160 682 232 26 1302 450 400 5.06 1120 340 80 240 190 740 400 24
7.5 132S 455 132 682 232 21 1158 360 375 3.05 1000 270 65 215 170 660 320 19
32 / 5 11 160M 594 160 736 286 26 1356 450 400 5.07 1250 340 80 240 205 840 400 24
7.5 132S 455 132 736 286 21 1212 360 375 3.06 1120 270 65 215 190 740 320 19
32 / 6 15 160M 594 160 790 340 26 1410 450 400 5.07 1250 340 80 240 205 840 400 24
11 160M 594 160 790 340 26 1410 450 400 5.07 1250 340 80 240 205 840 400 24
32 / 7 18.5 160L 638 160 844 394 30 1512 450 400 5.08 1400 340 80 240 230 940 400 24
15 160M 594 160 844 394 26 1464 450 400 5.07 1250 340 80 240 205 840 400 24
32 / 8 18.5 160L 638 160 898 448 30 1566 450 400 5.08 1400 340 80 240 230 940 400 24
15 160M 594 160 898 448 26 1518 450 400 5.08 1400 340 80 240 230 940 400 24
32 / 9 22 180M 654 180 952 502 30 1636 490 420 6.08 1400 380 80 260 230 940 440 24
18.5 160L 638 160 952 502 30 1620 450 400 5.08 1400 340 80 240 230 940 400 24
32 / 10 30 200L 747 200 1006 556 30 1783 540 440 7.09 1600 430 80 280 270 1060 490 24
22 180M 654 180 1006 556 30 1690 490 420 6.09 1600 380 80 260 270 1060 440 24
32 / 11 30 200L 747 200 1060 610 30 1837 540 440 7.09 1600 430 80 280 270 1060 490 24
22 180M 654 180 1060 610 30 1744 490 420 6.09 1600 380 80 260 270 1060 440 24
32 / 12 30 200L 747 200 1114 664 30 1891 540 440 7.10 1800 430 80 280 300 1200 490 24
22 180M 654 180 1114 664 30 1798 490 420 6.09 1600 380 80 260 270 1060 440 24
This leaflet is subject to alteration without notice. Dimensions are in mm without obligation.
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 40/2 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 40/3 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 40/4 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 40/5 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 40/6 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 40/7 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 40/8 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 40/9 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 40/10 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 40/11 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 40/12 Mas Grup
OMK Series
High Pressure Multistage Pumps
Dimension Table for OMK 40 – 1450 – 50 Hz Mas Grup

L
Lp Lm
180
196 c 259 ca

8
180

28
H
hm 150
he 25
80 135 hb .

300 80x80 80

s
zxø

Wb Ws W
DN T Df

L4 L5
Lb

Foundation Bolts Flange Dimensions

Hole Dia. (s) Number Dimensions PN DN Df T z ø
19 4 M 16 x 200 Suction 40 65 185 145 8 18
24 4 M 20 x 200 Discharge 40 40 150 110 4 18

Dimensions – 1450 RPM - 50 Hz

MOTOR PUMP Overall Base Plate
Pump
Base
Type KW IEC Lm Hm Lp C ca L W H Lb Wb hb he L4 L5 Ws s
Plate
OMK 40 / 2 1.5 90L 325 90 588 133 20 933 330 395 2.03 800 240 65 215 130 540 290 19
1.1 90S 300 90 588 133 20 908 330 395 2.03 800 240 65 215 130 540 290 19
40 / 3 2.2 100L 365 100 646 191 20 1031 330 395 2.04 900 240 65 215 150 600 290 19
1.5 90L 325 90 646 191 20 991 330 395 2.04 900 240 65 215 150 600 290 19
40 / 4 3 100L 365 100 704 249 20 1089 330 395 2.05 1000 240 65 215 170 660 290 19
2.2 100L 365 100 704 249 20 1089 330 395 2.05 1000 240 65 215 170 660 290 19
40 / 5 4 112M 384 112 762 307 21 1167 330 395 2.05 1000 240 65 215 170 660 290 19
3 100L 365 100 762 307 20 1147 330 395 2.05 1000 240 65 215 170 660 290 19
40 / 6 4 112M 384 112 820 365 21 1225 330 395 2.06 1120 240 65 215 190 740 290 19
3 100L 365 100 820 365 20 1205 330 395 2.06 1120 240 65 215 190 740 290 19
40 / 7 5.5 132S 455 132 878 423 26 1359 360 395 3.07 1250 270 65 215 205 840 320 19
4 112M 384 112 878 423 21 1283 330 395 2.06 1120 240 65 215 190 740 290 19
40 / 8 5.5 132S 455 132 936 481 26 1417 360 395 3.07 1250 270 65 215 205 840 320 19
4 112M 384 112 936 481 21 1341 330 395 2.07 1250 240 65 215 205 840 290 19
40 / 9 7.5 132M 493 132 994 539 26 1513 360 395 3.08 1400 270 65 215 230 940 320 19
5.5 132S 455 132 994 539 26 1475 360 395 3.08 1400 270 65 215 230 940 320 19
40 / 10 7.5 132M 493 132 1052 597 26 1571 360 395 3.08 1400 270 65 215 230 940 320 19
5.5 132S 455 132 1052 597 26 1533 360 395 3.08 1400 270 65 215 230 940 320 19
40 / 11 7.5 132M 493 132 1110 655 26 1629 360 395 3.09 1600 270 65 215 270 1060 320 19
5.5 132S 455 132 1110 655 26 1591 360 395 3.08 1400 270 65 215 230 940 320 19
40 / 12 9 C132M 493 132 1168 713 26 1687 360 395 3.09 1600 270 65 215 270 1060 320 19
7.5 132M 493 132 1168 713 26 1687 360 395 3.09 1600 270 65 215 270 1060 320 19
This leaflet is subject to alteration without notice. Dimensions are in mm without obligation.
OMK Series
High Pressure Multistage Pumps
Dimension Table for OMK 40 – 2900 – 50 Hz Mas Grup

L
Lp Lm
180
196 c 259 ca

8
180

28
H
hm 150
he 25
80 135 hb .

300 80x80 80

s
zxø

Wb Ws W
DN T Df

L4 L5
Lb

Foundation Bolts Flange Dimensions

Hole Dia. (s) Number Dimensions PN DN Df T z ø
19 4 M 16 x 200 Suction 40 65 185 145 8 18
24 4 M 20 x 200 Discharge 40 40 150 110 4 18
28 4 M 24 x 200

Dimensions – 2900 RPM - 50 Hz

MOTOR PUMP Overall Base Plate
Pump
Base
Type KW IEC Lm Hm Lp C ca L W H Lb Wb hb he L4 L5 Ws s
Plate
OMK 40 / 2 11 160M 594 160 588 133 26 1208 450 420 5.05 1000 340 80 240 170 660 400 24
7.5 132S 455 132 588 133 21 1064 360 395 3.04 900 270 65 215 150 600 320 19
40 / 3 15 160M 594 160 646 191 26 1266 450 420 5.06 1120 340 80 240 190 740 400 24
11 160M 594 160 646 191 26 1266 450 420 5.06 1120 340 80 240 190 740 400 24
40 / 4 22 180M 654 180 704 249 30 1388 490 440 6.07 1250 380 80 260 205 840 440 24
18.5 160L 638 160 704 249 30 1372 450 420 5.07 1250 340 80 240 205 840 400 24
40 / 5 30 200L 747 200 762 307 30 1539 540 460 7.08 1400 430 80 280 230 940 490 24
22 180M 654 180 762 307 30 1446 490 440 6.07 1250 380 80 260 205 840 440 24
40 / 6 30 200L 747 200 820 365 30 1597 540 460 7.08 1400 430 80 280 230 940 490 24
22 180M 654 180 820 365 30 1504 490 440 6.08 1400 380 80 260 230 940 440 24
40 / 7 37 200L 747 200 878 423 33 1658 540 460 7.09 1600 430 80 280 270 1060 490 24
30 200L 747 200 878 423 30 1655 540 460 7.08 1400 430 80 280 230 940 490 24
40 / 8 45 225M 790 225 936 481 43 1769 610 505 8.09 1600 480 100 325 270 1060 550 28
37 200L 747 200 936 481 33 1716 540 460 7.09 1600 430 80 280 270 1060 490 24
40 / 9 55 250M 890 250 994 539 42 1926 660 530 9.10 1800 530 100 350 300 1200 600 28
45 225M 790 225 994 539 43 1827 610 505 8.09 1600 480 100 325 270 1060 550 28
40 / 10 55 250M 890 250 1052 597 42 1984 660 530 9.10 1800 530 100 350 300 1200 600 28
45 225M 790 225 1052 597 43 1885 610 505 8.10 1800 480 100 325 300 1200 550 28
This leaflet is subject to alteration without notice. Dimensions are in mm without obligation.
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 50/2 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 50/3 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 50/4 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 50/5 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 50/6 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 50/7 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 50/8 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 50/9 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 50/10 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 50/11 Mas Grup
OMK Series
High Pressure Multistage Pumps
Dimension Table for OMK 50 – 1450 rpm – 50 Hz Mas Grup

L
Lp Lm
210
224 c 304 ca

8
210

31
H
hm 180
he 28
80 149 hb .

350 80x80 80

s
zxø

Wb Ws W
DN T Df

L4 L5
Lb

Foundation Bolts Flange Dimensions

Hole Dia. (s) Number Dimensions PN DN Df T z ø
19 4 M 16 x 200 Suction 40 80 200 160 8 18
24 4 M 20 x 200 Discharge 40 50 165 125 4 18

Dimensions – 1450 RPM - 50 Hz

MOTOR PUMP Overall Base Plate
Pump
Base
Type KW IEC Lm Hm Lp C ca L W H Lb Wb hb he L4 L5 Ws s
Plate
OMK 50 / 2 4 112M 365 100 716 188 20 1101 360 455 3.05 1000 270 65 245 170 660 320 19
3 100L 365 100 716 188 20 1101 360 455 3.05 1000 270 65 245 170 660 320 19
50 / 3 5.5 132S 455 132 794 266 26 1275 360 455 3.06 1120 270 65 245 190 740 320 19
4 112M 384 112 794 266 21 1199 360 455 3.06 1120 270 65 245 190 740 320 19
50 / 4 7.5 132M 493 132 872 344 26 1391 360 455 3.07 1250 270 65 245 205 840 320 19
5.5 132S 455 132 872 344 26 1353 360 455 3.07 1250 270 65 245 205 840 320 19
50 / 5 9 C132M 493 132 950 422 26 1469 360 455 3.07 1250 270 65 245 205 840 320 19
7.5 132M 493 132 950 422 26 1469 360 455 3.07 1250 270 65 245 205 840 320 19
50 / 6 11 160M 594 160 1028 500 30 1652 450 470 5.09 1600 340 80 260 270 1060 400 24
9 C132M 493 132 1028 500 26 1547 360 455 3.08 1400 270 65 245 230 940 320 19
50 / 7 11 160M 594 160 1106 578 30 1730 450 470 5.09 1600 340 80 260 270 1060 400 24
9 C132M 493 132 1106 578 26 1625 360 455 3.09 1600 270 65 245 270 1060 320 19
50 / 8 15 160L 638 160 1184 656 30 1852 450 470 5.10 1800 340 80 260 300 1200 400 24
11 160M 594 160 1184 656 30 1808 450 470 5.09 1600 340 80 260 270 1060 400 24
50 / 9 15 160L 638 160 1262 734 30 1930 450 470 5.10 1800 340 80 260 300 1200 400 24
11 160M 594 160 1262 734 30 1886 450 470 5.10 1800 340 80 260 300 1200 400 24
50 / 10 18.5 180M 654 180 1340 812 33 2027 490 470 6.10 1800 380 80 260 300 1200 440 24
15 160L 638 160 1340 812 30 2008 450 470 5.10 1800 340 80 260 300 1200 400 24
50 / 11 18.5 180M 654 180 1418 890 33 2105 490 470 6.11 2000 380 80 260 340 1320 440 24
15 160L 638 160 1418 890 30 2086 450 470 5.11 2000 340 80 260 340 1320 400 24
This leaflet is subject to alteration without notice. Dimensions are in mm without obligation.
OMK Series
High Pressure Multistage Pumps
Dimension Table for OMK 50 – 2900 rpm – 50 Hz Mas Grup

L
Lp Lm
210
224 c 304 ca

8
210

31
H
hm 180
he 28
80 149 hb .

350 80x80 80

s
zxø

Wb Ws W
DN T Df

L4 L5
Lb

Foundation Bolts Flange Dimensions

Hole Dia. (s) Number Dimensions PN DN Df T z ø
24 4 M 20 x 200 Suction 40 80 200 160 8 18
28 4 M 24 x 200 Discharge 40 50 165 125 4 18

Dimensions – 2900 RPM - 50 Hz

MOTOR PUMP Overall Base Plate
Pump
Base
Type KW IEC Lm Hm Lp C ca L W H Lb Wb hb he L4 L5 Ws s
Plate
OMK 50 / 2 30 200L 747 200 716 188 30 1493 540 490 8.07 1250 430 80 280 205 840 490 24
22 180M 654 180 716 188 30 1400 490 470 6.07 1250 380 80 260 205 840 440 24
50 / 3 37 200L 747 200 794 266 33 157 540 490 7.08 1400 430 80 280 230 940 490 24
30 200L 747 200 794 266 30 1571 540 490 7.08 1400 430 80 280 230 940 490 24
50 / 4 45 225M 790 225 872 344 43 1705 610 535 8.09 1600 480 100 325 270 1060 550 28
37 200L 747 200 872 344 33 1652 540 490 7.08 1400 430 80 280 230 940 490 24
50 / 5 75 280S 958 280 950 422 43 1951 730 590 10.10 1800 600 100 380 300 1200 670 28
55 250M 890 250 950 422 42 1882 660 560 9.10 1800 530 100 350 300 1200 600 28
50 / 6 75 280S 958 280 1028 500 43 2029 730 590 10.10 1800 600 100 380 300 1200 670 28
55 250M 890 250 1028 500 42 1960 660 560 9.10 1800 530 100 350 300 1200 600 28
50 / 7 90 280M 1010 280 1106 578 43 2159 730 590 10.11 2000 600 100 380 340 1320 670 28
75 280S 958 280 1106 578 43 2107 730 590 10.10 1800 600 100 380 300 1200 670 28
This leaflet is subject to alteration without notice. Dimensions are in mm without obligation.
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 65/2 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 65/3 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 65/4 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 65/5 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 65/6 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 65/7 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 65/8 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 65/9 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 65/10 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 65/11 Mas Grup
OMK Series
High Pressure Multistage Pumps
Dimension Table for OMK 65 – 1450 rpm – 50 Hz Mas Grup

L
Lp Lm
240
229 c 324 ca

10
240

35
H
hm 200
he 32
80 155 hb .

350 100x100 80

s
zxø

Wb Ws W
DN T Df

L4 L5
Lb

Foundation Bolts Flange Dimensions

Hole Dia. (s) Number Dimensions PN DN Df T z ø
19 4 M 16 x 200 Suction 40 100 235 190 8 23
24 4 M 20 x 200 Discharge 40 65 185 145 8 18
28 4 M 24 x 200

Dimensions – 1450 RPM - 50 Hz

MOTOR PUMP Overall Base Plate
Pump
Base
Type KW IEC Lm Hm Lp C ca L W H Lb Wb hb he L4 L5 Ws s
Plate
OMK 65 / 2 5.5 132S 455 132 746 193 26 1227 390 505 4.06 1120 300 65 265 190 740 350 19
4 112M 384 112 746 193 21 1151 390 505 4.05 1000 300 65 265 170 660 350 19
65 / 3 9 C132M 493 132 831 278 26 1350 390 505 4.07 1250 300 65 265 205 840 350 19
7.5 132M 493 132 831 278 26 1350 390 505 4.07 1250 300 65 265 205 840 350 19
65 / 4 15 160L 638 160 916 363 30 1584 450 520 5.08 1400 340 80 280 230 940 400 24
11 160M 594 160 916 363 30 1540 450 520 5.08 1400 340 80 280 230 940 400 24
65 / 5 15 160L 638 160 1001 448 30 1669 450 520 5.09 1600 340 80 280 270 1060 400 24
11 160M 594 160 1001 448 30 1625 450 520 5.08 1400 340 80 280 230 940 400 24
65 / 6 18.5 180M 654 180 1086 533 33 1773 490 520 6.09 1600 380 80 280 270 1060 440 24
15 160L 638 160 1086 533 30 1754 450 520 5.09 1600 340 80 280 270 1060 400 24
65 / 7 22 180L 692 180 1171 618 33 1896 490 520 6.10 1800 380 80 280 300 1200 440 24
18.5 180M 654 180 1171 618 33 1858 490 520 6.10 1800 380 80 280 300 1200 440 24
65 / 8 30 200L 747 200 1256 703 42 2045 540 520 7.10 1800 430 80 280 300 1200 490 24
22 180L 692 180 1256 703 33 1981 490 520 6.10 1800 380 80 280 300 1200 440 24
65 / 9 30 200L 747 200 1341 788 42 2130 540 520 7.11 2000 430 80 280 340 1320 490 24
22 180L 692 180 1341 788 33 2066 490 520 6.11 2000 380 80 280 340 1320 440 24
65 / 10 30 200L 747 200 1426 873 42 2215 540 520 7.11 2000 430 80 280 340 1320 490 24
22 180L 692 180 1426 873 33 2151 490 520 6.11 2000 380 80 280 340 1320 440 24
65 / 11 37 225S 795 225 1511 958 43 2349 610 565 8.12 2250 480 100 325 390 1470 550 28
30 200L 747 200 1511 958 42 2300 540 520 7.12 2250 430 80 280 390 1470 490 24
This leaflet is subject to alteration without notice. Dimensions are in mm without obligation.

61
OMK Series
High Pressure Multistage Pumps
Dimension Table for OMK 65 – 2900 rpm – 50 Hz Mas Grup

L
Lp Lm
240
229 c 324 ca

10
240

35
H
hm 200
he 32
80 155 hb .

350 100x100 80

s
zxø

Wb Ws W
DN T Df

L4 L5
Lb

Foundation Bolts Flange Dimensions

Hole Dia. (s) Number Dimensions PN DN Df T z ø
24 4 M 20 x 200 Suction 40 100 235 190 8 23
28 4 M 24 x 200 Discharge 40 65 185 145 8 18
33 4 M 30 x 200

Dimensions – 2900 RPM - 50 Hz

MOTOR PUMP Overall Base Plate
Pump
Base
Type KW IEC Lm Hm Lp C ca L W H Lb Wb hb he L4 L5 Ws s
Plate
OMK 65 / 2 45 225M 790 225 746 193 43 1579 610 565 8.08 1400 480 100 325 230 940 550 28
37 200L 747 200 746 193 33 1526 540 520 7.08 1400 430 80 280 230 940 490 24
65 / 3 75 280S 958 280 831 278 43 1832 730 620 10.09 1600 600 100 380 270 1060 670 28
55 250M 890 250 831 278 42 1763 660 590 9.09 1600 530 100 350 270 1060 600 28
65 / 4 90 280M 1010 280 916 363 43 1969 730 620 10.10 1800 600 100 380 300 1200 670 28
75 280S 958 280 916 363 43 1917 730 620 10.09 1600 600 100 380 270 1060 670 28
65 / 5 110 315S 1078 315 1001 448 43 2122 830 675 11.10 1800 680 120 435 300 1200 760 33
90 280M 1010 280 1001 448 43 2054 730 620 10.10 1800 600 100 380 300 1200 670 28
This leaflet is subject to alteration without notice. Dimensions are in mm without obligation.
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 80/2 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 80/3 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 80/4 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 80/5 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 80/6 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 80/7 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 80/8 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 80/9 Mas Grup
OMK Series
High Pressure Multistage Pumps
Performance Curves OMK 80/10 Mas Grup
OMK Series
High Pressure Multistage Pumps
Dimension Table for OMK 80 – 1450 rpm – 50 Hz Mas Grup

L
Lp Lm
270
259 c 377 ca

12
270

45
H
hm 230
he 42
80 171 hb .

350 100x100 80

s
zxø

Wb Ws W
DN T Df

L4 L5
Lb

Foundation Bolts Flange Dimensions

Hole Dia. (s) Number Dimensions PN DN Df T z ø
19 4 M 16 x 200 Suction 40 125 270 220 8 27
24 4 M 20 x 200 Discharge 40 80 200 160 8 18
28 4 M 24 x 200
Dimensions – 1450 RPM - 50 Hz
MOTOR PUMP Overall Base Plate
Pump
Base
Type KW IEC Lm Hm Lp C ca L W H Lb Wb hb he L4 L5 Ws s
Plate
OMK 80 / 2 11 160M 594 160 886 250 30 1510 450 580 5.08 1400 340 80 310 230 940 400 24
9 C132M 493 132 886 250 26 1405 450 580 5.07 1250 340 80 310 205 840 400 24
80 / 3 18.5 180M 654 180 996 360 33 1683 490 580 6.09 1600 380 80 310 270 1060 440 24
15 160L 638 160 996 360 30 1664 450 580 5.09 1600 340 80 310 270 1060 400 24
80 / 4 22 180L 692 180 1106 470 33 1831 490 580 6.09 1600 380 80 310 270 1060 440 24
18.5 180M 654 180 1106 470 33 1793 490 580 6.09 1600 380 80 310 270 1060 440 24
80 / 5 30 200L 747 200 1216 580 42 2005 540 580 7.10 1800 430 80 310 300 1200 490 24
22 180L 692 180 1216 580 33 1941 490 580 6.10 1800 380 80 310 300 1200 440 24
80 / 6 37 225S 795 225 1326 690 43 2164 610 600 8.11 2000 480 100 330 340 1320 550 28
30 200L 747 200 1326 690 42 2115 540 580 7.11 2000 430 80 310 340 1320 490 24
80 / 7 45 225M 820 225 1436 800 43 2299 610 600 8.12 2250 480 100 330 390 1470 550 28
37 225S 795 225 1436 800 43 2274 610 600 8.11 2000 480 100 330 340 1320 550 28
80 / 8 45 225M 820 225 1546 910 43 2409 610 600 8.12 2250 480 100 330 390 1470 550 28
37 225S 795 225 1546 910 43 2384 610 600 8.12 2250 480 100 330 390 1470 550 28
80 / 9 55 250M 890 250 1656 1020 43 2589 660 620 9.13 2500 530 100 350 440 1620 600 28
45 225M 820 225 1656 1020 43 2519 610 600 8.12 2250 480 100 330 390 1470 550 28
80 / 10 55 250M 890 250 1766 1130 43 2699 660 620 9.13 2500 530 100 350 440 1620 600 28
45 225M 820 225 1766 1130 43 2629 610 600 8.13 2500 480 100 130 440 1620 550 28
This leaflet is subject to alteration without notice. Dimensions are in mmm without obligation.
OMK Series
High Pressure Multistage Pumps
Dimension Table for OMK 80 – 2900 rpm – 50 Hz Mas Grup

L
Lp Lm
270
259 c 377 ca

12
270

45
H
hm 230
he 42
80 171 hb .

350 100x100 80

s
zxø

Wb Ws W
DN T Df

L4 L5
Lb

Foundation Bolts Flange Dimensions

Hole Dia. (s) Number Dimensions PN DN Df T z ø
28 4 M 24 x 200 Suction 40 125 270 220 8 27
33 4 M 30 x 200 Discharge 40 80 200 160 8 18

Dimensions – 2900 RPM - 50 Hz

MOTOR PUMP Overall Base Plate
Pump
Base
Type KW IEC Lm Hm Lp C ca L W H Lb Wb hb he L4 L5 Ws s
Plate
OMK 80 / 2 90 280M 1010 280 886 250 43 1939 730 650 10.10 1800 600 100 380 300 1200 670 28
75 280S 958 280 886 250 43 1887 730 650 10.09 1600 600 100 380 270 1060 670 28
80 / 3 132 315M 1130 315 996 360 43 2169 830 705 11.10 1800 680 120 435 300 1200 760 33
110 315S 1078 315 996 360 43 2117 830 705 11.10 1800 680 120 435 300 1200 760 33
80 / 4 185 315L 1220 315 1106 470 43 2369 830 705 11.10 1800 680 120 435 300 1200 760 33
132 315M 1130 315 1106 470 43 2279 830 705 11.11 2000 680 120 435 340 1320 760 33
80 / 5 250 355M 1330 355 1216 580 43 2589 915 775 12.12 2250 750 150 505 390 1470 840 33
200 315L 1220 315 1216 580 43 2479 830 705 11.11 2000 680 120 435 340 1320 760 33
This leaflet is subject to alteration without notice. Dimensions are in mmm without obligation.
OMK Series
High Pressure Multistage Pumps
Permissible Forces and Moments on Pump Flanges Mas Grup
Note: The total forces and the total moments are the sum of the individual forces and
moments in the direction of x, y, z.

F  ( Fx  Fy  Fz ) [N] M  ( M x  M y  M z ) [Nm]
 Suction and discharge flanges should be considered separate.
 If the loads applied do not act simultaneously at their maximum values, it will be
permissible for one of the loads to exceed its permissible value to a maximum of 1.4
times.
 The actual forces and moments can be connected by the relation below.

(( F calculated /  Fmax . permissible )2  ( M calculated /  M max . permissible )2 )  2

PERMISSIBLE FORCES AND MOMENTS ON PUMP SUCTION FLANGE

PUMP FORCES (N) MOMENTS (Nm) DNd

TYPE FX FY FZ ∑F MX MY MZ ∑M
OMK 32 431 477 392 753 269 154 200 369
OMK 40 560 620 510 979 350 200 260 480
OMK 50 730 815 660 1278 395 230 295 544
OMK 65 900 1010 810 1577 440 260 330 608
DNs z
OMK 80 1125 1263 1013 1971 550 325 413 760

y x

PUMP FORCES (N) MOMENTS (Nm) DNd

TYPE FX FY FZ ∑F MX MY MZ ∑M DNs
OMK 32 431 477 392 753 269 154 200 369
OMK 40 560 620 510 979 350 200 260 480
OMK 50 730 815 660 1278 395 230 295 544
OMK 65 900 1010 810 1577 440 260 330 608 z
OMK 80 1125 1263 1013 1971 550 325 413 760

y x

PUMP FORCES (Nm) MOMENTS (Nm) DNs

TYPE FX FY FZ ∑F MX MY MZ ∑M
OMK 32 431 392 477 753 269 154 200 369 DNd
OMK 40 560 510 620 979 350 200 260 480
OMK 50 730 660 815 1278 395 230 295 544
OMK 65 900 810 1010 1577 440 260 330 608
OMK 80 1125 1013 1263 1971 550 325 413 760 z

y x

This leaflet is subject to alteration without notice.

OMK Series
High Pressure Multistage Pumps
Permissible Forces and Moments on Pump Flanges Mas Grup
Note: The total forces and the total moments are the sum of the individual forces and
moments in the direction of x, y, z.

F  ( Fx  Fy  Fz ) [N] M  (M x  M y  M z ) [Nm]
 Suction and discharge flanges should be considered separate.
 If the loads applied do not act simultaneously at their maximum values, it will be
permissible for one of the loads to exceed its permissible value to a maximum of 1.4
times.
 The actual forces and moments can be connected by the relation below.

(( F calculated /  Fmax . permissible )2  ( M calculated /  M max . permissible )2 )  2

PERMISSIBLE FORCES AND MOMENTS ON PUMP DISCHARGE FLANGES

PUMP FORCES (N) MOMENTS (Nm) DNs

TYPE FX FY FZ ∑F MX MY MZ ∑M
OMK 32 264 240 304 469 224 112 152 293 DNd
OMK 40 330 300 380 586 280 140 190 366
OMK 50 445 405 500 782 315 170 225 423
OMK 65 560 510 620 979 350 200 260 480
OMK 80 689 627 763 1204 431 246 320 590 z

y x

PUMP FORCES (N) MOMENTS (Nm) DNs

TYPE FX FY FZ ∑F MX MY MZ ∑M
OMK 32 264 304 240 469 224 112 152 293
OMK 40 330 380 300 586 280 140 190 366
OMK 50 445 500 405 782 315 170 225 423
OMK 65 560 620 510 979 350 200 260 480
OMK 80 689 763 627 1204 431 246 320 590 z

DNd
y x

PUMP FORCES (N) MOMENTS (Nm) DNs

TYPE FX FY FZ ∑F MX MY MZ ∑M
OMK 32 264 304 240 469 224 112 152 293
OMK 40 330 380 300 586 280 140 190 366
OMK 50 445 500 405 782 315 170 225 423 DNd
OMK 65 560 620 510 979 350 200 260 480
OMK 80 689 763 627 1204 431 246 320 590 z

y x
This leaflet is subject to alteration without notice.
OMK Series
High Pressure Multistage Pumps
Moment of Inertia (Without Coupling) Mas Grup

MOMENT OF INERTIA I [ kgm2 ]

PUMP Impeller Impeller Impeller
TYPE GG25 Bronze Stainless Steel
without with without with without with
water water water water water water
OMK 32 / 1 0.00310 0.00335 0.00342 0.00389 0.00307 0.00355
32 / 2 0.00605 0.00656 0.00669 0.00765 0.00601 0.00697
32 / 3 0.00893 0.00970 0.00990 0.01134 0.00888 0.01031
32 / 4 0.01181 0.01284 0.01311 0.01503 0.01175 0.01366
32 / 5 0.01476 0.01605 0.01639 0.01878 0.01468 0.01708
32 / 6 0.01764 0.01919 0.01960 0.02766 0.01755 0.02042
32 / 7 0.02059 0.02787 0.02288 0.02623 0.02049 0.02384
32 / 8 0.02347 0.02554 0.02609 0.02992 0.02336 0.02718
32 / 9 0.02634 0.02869 0.02930 0.03360 0.02623 0.03053
32 / 10 0.02929 0.03190 0.03258 0.03736 0.02916 0.03395
32 / 11 0.03217 0.03504 0.03579 0.04105 0.03203 0.03729
32 / 12 0.03505 0.03818 0.03900 0.04474 0.03490 0.04064
32 / 13 0.03793 0.04132 0.04221 0.04843 0.03777 0.04399
32 / 14 0.03793 0.04132 0.04221 0.04843 0.03777 0.04399

OMK 40 / 1 0.00375 0.00405 0.00413 0.00471 0.00372 0.00430

40 / 2 0.00732 0.00793 0.00810 0.00926 0.00727 0.00843
40 / 3 0.01080 0.01174 0.01198 0.01372 0.01074 0.01248
40 / 4 0.01429 0.01554 0.01587 0.01818 0.01421 0.01653
40 / 5 0.01786 0.01942 0.01983 0.02273 0.01777 0.02066
40 / 6 0.02134 0.02322 0.02372 0.03347 0.02124 0.02471
40 / 7 0.02491 0.03372 0.02769 0.03174 0.02479 0.02884
40 / 8 0.02839 0.03091 0.03157 0.03620 0.02826 0.03289
40 / 9 0.03188 0.03471 0.03545 0.04066 0.03174 0.03694
40 / 10 0.03545 0.03860 0.03942 0.04521 0.03529 0.04107
40 / 11 0.03893 0.04240 0.04331 0.04967 0.03876 0.04512
40 / 12 0.04241 0.04620 0.04719 0.05413 0.04223 0.04917

OMK 50 / 1 0.00628 0.00571 0.00583 0.00664 0.00524 0.00606

50 / 2 0.01216 0.01119 0.01142 0.01305 0.01025 0.01189
50 / 3 0.01800 0.01655 0.01690 0.01934 0.01515 0.01760
50 / 4 0.02384 0.02191 0.02237 0.02564 0.02004 0.02331
50 / 5 0.02973 0.02738 0.02797 0.03205 0.02505 0.02913
50 / 6 0.03552 0.03274 0.03344 0.04719 0.02995 0.03484
50 / 7 0.04141 0.04754 0.03904 0.04475 0.03496 0.04067
50 / 8 0.04725 0.04358 0.04451 0.05104 0.03985 0.04638
50 / 9 0.05309 0.04894 0.04999 0.05733 0.04475 0.05209
50 / 10 0.05897 0.05442 0.05558 0.06374 0.04976 0.05791
50 / 11 0.06476 0.05978 0.06106 0.07003 0.05465 0.06362
This leaflet is subject to alteration without notice.
OMK Series
High Pressure Multistage Pumps
Moment of Inertia (Without Coupling) Mas Grup

MOMENT OF INERTIA I [ kgm2 ]

PUMP Impeller Impeller Impeller
TYPE GG25 Bronze Stainless Steel
without with without with without with
water water water water water water
OMK 65 / 1 0.00942 0.01134 0.01102 0.01295 0.00984 0.01177
65 / 2 0.01819 0.02204 0.02140 0.02525 0.01905 0.02290
65 / 3 0.02696 0.03274 0.03178 0.03756 0.02825 0.03403
65 / 4 0.03574 0.04344 0.04216 0.04986 0.03745 0.04515
65 / 5 0.04451 0.05414 0.05254 0.06217 0.04665 0.05628
65 / 6 0.05318 0.06474 0.06281 0.07437 0.05575 0.06730
65 / 7 0.06195 0.07544 0.07319 0.08667 0.06495 0.07843
65 / 8 0.07073 0.08614 0.08357 0.09898 0.07415 0.08956
65 / 9 0.07950 0.09684 0.09395 0.11128 0.08335 0.10069
65 / 10 0.08828 0.10754 0.10433 0.12359 0.09256 0.11182
65 / 11 0.09694 0.11813 0.11460 0.13578 0.10165 0.12284

OMK 80 / 1 0.01267 0.01526 0.01742 0.01325 0.01325 0.01584

80 / 2 0.02448 0.02966 0.03398 0.02563 0.02563 0.03082
80 / 3 0.03629 0.04406 0.05054 0.03802 0.03802 0.04579
80 / 4 0.04810 0.05846 0.06710 0.05040 0.05040 0.06077
80 / 5 0.05990 0.07286 0.08366 0.06278 0.06278 0.07574
80 / 6 0.07157 0.08712 0.10008 0.07502 0.07502 0.09058
80 / 7 0.08338 0.10152 0.11664 0.08741 0.08741 0.10555
80 / 8 0.09518 0.11592 0.13320 0.09979 0.09979 0.12053
80 / 9 0.10699 0.13032 0.14976 0.11218 0.11218 0.13550
80 / 10 0.11880 0.14472 0.16632 0.12456 0.12456 0.15048
This leaflet is subject to alteration without notice.
 Mas Grup

Head Office / Center Service:

Aydınlı Mah. Birlik OSB. 1.No’lu Cadde No:17 Tuzla - İSTANBUL / TURKEY
Tel: +90 (216) 456 47 00 pbx Fax: +90 (216) 455 14 24

Ankara Regional Directorate:

Aşağı Öveçler Mah. 1329 Sok. No:6/9 Öveçler ANKARA / TURKEY
Tel: +90 (312) 472 81 60-67 Fax: +90 (312) 472 82 51

Factory:
1. Organize Sanayi Bölgesi Parsel 249/5 Beyköy - DÜZCE / TURKEY
Tel: +90 (380) 553 73 88 Fax: +90 (380) 553 71 29