Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 38 views

    FS DMT02 NP-B Assembly

    Uploaded by

    Matsumura Sokon
    This document provides instructions for dismounting and removing various pump components for maintenance purposes. It describes how to dismount the pump casing by loosening bolts and screws. It explains how to remove the impeller and front shaft sleeve by undoing screws and extracting parts. It also details how to dismount the product-side mechanical seal by removing its various rings, springs, and O-rings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    FS DMT02 NP-B Assembly

    Uploaded by

    Matsumura Sokon
    38 views1 page
    This document provides instructions for dismounting and removing various pump components for maintenance purposes. It describes how to dismount the pump casing by loosening bolts and screws. It explains how to remove the impeller and front shaft sleeve by undoing screws and extracting parts. It also details how to dismount the product-side mechanical seal by removing its various rings, springs, and O-rings.

    Original Title

    FS DMT02 NP-B ASSEMBLY

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for dismounting and removing various pump components for maintenance purposes. It describes how to dismount the pump casing by loosening bolts and screws. It explains how to remove the impeller and front shaft sleeve by undoing screws and extracting parts. It also details how to dismount the product-side mechanical seal by removing its various rings, springs, and O-rings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    38 views1 page

    FS DMT02 NP-B Assembly

    Uploaded by

    Matsumura Sokon
    This document provides instructions for dismounting and removing various pump components for maintenance purposes. It describes how to dismount the pump casing by loosening bolts and screws. It explains how to remove the impeller and front shaft sleeve by undoing screws and extracting parts. It also details how to dismount the product-side mechanical seal by removing its various rings, springs, and O-rings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Maintenance

    7.3.4 Dismounting the pump casing 7.3.6 Dismounting the product-side MUNSCH-REA-F
    mechanical seal
    901.10
    * *
    412.1 / 400.10
    158 161 (161.2)
    412.3
    157 474.1
    554.2 473
    474.2
    901.2 477
    412.84
    471
    554.26
    914.18

    101

    472
    412.61
    523
    Fig. 13 Dismounting the pump casing (523.6) 412.5
    475
    1. Loosen hexagon head bolts 901.10 at intermediate lantern 412.2
    146.
    2. Undo the hexagon head screws 901.2. Fig. 15 Dismounting the product-side MUNSCH-REA-F
    3. Slide off pump casing 101 with suction flange 157 and pres- mechanical seal
    sure flange 158.
    1. Undo the rotating seal ring 472 from the shaft sleeve 523
    7.3.5 Removing the impeller and front shaft sleeve (523.6).
    2. Take the casing cover 161 (161.2) out of the intermediate
    523 (523.6) / 472 / 412.61 / 412.5 lantern 146 and set it down with the seal cover 471.
    3. Take the O-ring 412.1 or gasket 400.10 off the casing cover
    509 161 (161.2) and replace it if necessary.
    412.75 4. Extract stationary seal ring 475.
    412.74 5. Turn the casing cover upside down.
    230 6. Undo the socket head cap screws 914.18 and remove the
    939 washers 554.26.
    914.1 7. Remove the seal cover (471).
    8. Remove spring 477 and thrust ring 474.2.
    412.4
    9. Remove stationary seal ring holder 473.
    10. Remove thrust ring 474.1.
    11. Take out the O-rings 412.61, 412.5, 412.2, 412.84, 412.3
    922 and replace them.
    Fig. 14 Removing the impeller and front shaft sleeve 7.3.7 Dismounting the rear shaft sleeve
    1. Undo the impeller screw 922 with circlip pliers and unscrew Pull the rear shaft sleeve 523.1 (523.5) off the pump shaft
    it. 211.
    2. Undo the socket head cap screw 914.1 with SCHNORR
    spring washer 939.
    3. Extract impeller 230.
    4. Extract intermediate ring 509.
    5. Remove and replace the O-rings 412.4, 412.74, 412.75.
    6. Extract the rotating seal ring 472 with shaft sleeve 523
    (523.6) from the pump shaft 211.

    EN – 03 BA-2009.12 NP-B with MUNSCH-REA-F 29

    You might also like