TDS Estorex EP10
TDS Estorex EP10
TDS Estorex EP10
Application instructions
Estorex EP10 is a low viscosity, two-part solvent free
epoxy resin compound. It consists of one part epoxy Horizontal Application
resin and one part of curing agent. It has high
penetrability to the concrete surfaces, and will cure in Preparation
crack and cavities.
A V-groove shall be formed along the crack lines
Uses before filling with Estorex EP10. In the case of
suspended slabs, the underside of the crack should be
Estorex EP10 is recommended for cracks and cavities sealed with Estobond EC to prevent leakage of the
repairs / injection in concrete structures with of 0.2 – crack sealer through the slab.
10.0 mm with no shrink, high strength and high
adhesion to concrete and steel. Mixing
Tools, etc can be cleaned while the resin is still Estop manufactures and offers a wide range of
uncured with solvent cleaner. complementary products, which includes waterstops,
waterproofing products, grouts, anchors, specialized
Technical Support flooring products. In addition, a wide range of products
formulated for repair and refurbishment of spalled
Estop offers a comprehensive range of high concrete are available.
performance, high quality of repair product for both
new and existing concrete surfaces. In addition, the Packing & Size
company offers a technical support package to
specifiers, end-users and contractors, as well as on- Estorex EP10 is packed in 5 kg set
site technical assistance.
Coverage
Storage
Estorex 1 litre pack will fillll a cavity of 25mm deep with
Estorex EP10 should be stored on pallets in dry 3 mm wide for a length of approximately 13 m
conditions. Under these conditions, the product will
have a shelf life of 12 months. if stored in extreme heat
locations the shelf life may be reduced.
Precaution
Rev 01/tech/IV/20