Thane Municipal Corporation Thane: Revised Measurement Sheet

THANE MUNICIPAL CORPORATION THANE
REVISED MEASUREMENT SHEET

NAME OF WORK : - Widening and strengthening of LBS Road from Teen Hat Naka to Majiwada Flyover on NH 3
Description in Brief :-
1 Length of Road :- 3250
2 Existing Width of Road :- 20
3 Proposed Width of Road :- 25
4 Proposed Gutter/footpath on both side 4.00
5 Existing Gutter/Footpath 4.00
6 width of side shoulder 5.00
7 LBS ROAD (TEEN HATH NAKA TO MULUND CHECK NAKA ) 6800 SQM AREA
Sr.No. Discription No. L B H/D QTY Unit
1 Excavation for Road Ways in Soft Rock

Manual Means
Road 1 2750.00 5.00 0.200 2750.00
2750.00 Cum
1 (a) Excavation for Road Ways in Soft Rock

Mechanical Means
Road 1 500.00 5.00 0.200 500.00
500.00 Cum
2 Excavation for Road ways in soft starta

Manual Means
Gutter 2 250.00 1.80 1.2 1080.00
1080.00 Cum
2 (a) Excavation for Road ways in soft starta

Mechanical means
Road 1 3250.00 5.00 0.365 5931.25
Approach 30 20.00 5.00 0.565 1695.00
7626.25 Cum
2 (b) Excavation for Road ways in soft starta such as hard

Murum and boulder
Gutter L/s 50.00
50.00 Cum
3 Excavation for foundation/pipe treches in ash muddy/

marshy/ slushy/soi
Gutter 2.00 250.00 1.00 0.80 400.00

400.00 CUM
4 Compacting the subgrade (200 mm Loose) with Vibratory
roller including artificial watering etc. complete.
Road 1 3250.00 5.00 16250.00

Approach 30 20 5 3000.00
19250 SQM
5 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone
soiling 15 cm to 20 cm
Gutter 2 250.00 1.8 0.23 207.00
Footpath 2 2850.00 0.60 0.15 513.00
720.00 Cum
6 P/L insitu cement concrete 1:2:4 of trap metal for

foundation & bedding
Gutter 2 250 1.8 0.15 135
Footpath 2.00 2850.00 0.60 0.1 342
477 Cum
7 Providing & fixing in position NP2 pipe with necessary

fittings including necessary excavation refilling the
trenches etc. completed
225 mm dia 167.00 1.20 200.40
200.40 Rmt
300 mm dia 1.00 20.00 20.00
20.00 Rmt
8 P/L insitu cement concrete M 25 for RCC Raft
Gutter Wall 1.00
1.00 CUM
9 P/L insitu cement concrete M 25 for RCC Pardi
Gutter Wall 1.00
1.00 CUM
10 Providing and fixing in position-T.M.T. bar reinforcement

of various diameters for R.C.C. pile caps, footings,
foundations, slabs, beams, columns, canopies, staircases,
newels, chajjas, lintels, pardies, coping, fins, arches, etc.
as per detailed designs, drawings and schedules, including
cutting, bending, hooking the bars, binding with wires or
tack welding and supporting as required etc. complete.
142.00 100 kg/cum 14.2 Mt
11 Providing and casting in situ cement concrete M25 of trap

metal for R.C.C. Slabs and landings upto and inclusive of
15cm thickness as per detailed drawings and designs,
including centering, formwork, compacting, finishing the
surface with C.M. 1:3 of sufficient minimum thickness to
give a smooth and even surfaceor roughning if special
finish is to be provided and curing etc. complete.
(Excluding steel reinforcement)
Gutter 2 250.00 1.4 0.2 140.00

140.00 cum
12 Dewatering using 5 to 9 H.P. pumps for all drain C.D. and
road construction work including diversion of stream,
providing coffer dam bund etc. as directed etc. complete
1 400 400.00 Hrs
13 Providing and casting in situ cement concrete of M - 20

grade of trap / granite /quartzite/ gneiss metal for bed
blocks, foundation blocks
4.00 250.00 0.25 0.8 200.00
200.00 Cum
14 Providing and laying wedge shear elemental layer

( WSEL) by using rubble stone of size 15 to 20 cm thick
in single layer of 230 mm including packing the same
with 20 mm to 40 mm thick aggregates ( normal size) and
using stone powder of 40 mm to 50 mm thick on surface
and watering & compacting by vibratory roller
confirming layer thickness of minimum 200 mm and as
directed by Engineer - in - charge etc complete.
Road 2 500 5.00 0.23 1150

1150 Cum
15 P/L size metal (grade wise) mm metal for water bound

macadam of consolidated thickness 75 mm including
powdering, watering, compacting by vibratory roller etc.
complete. (Grade II )
Road 1 3250 5.00 0.3 4875.00

30 20 5 0.3 900.00
5775.00 Cum
16 Providing and Laying Ultra thin White Topping (UTWT)

concrete overlay incorporating Graded Fibrillated 100%
virgin Polypropylene fibres, Micro-silica, fly ash and
plastisizers of approved make as per specifications
formwork, placing, compacting and curing the concrete
for 3 days etc completed.
10 20.00 6.00 0.125 150.00
150.00 Cum
17 Providing and fixing in position mild steel tie bars of

12mm dia.55 cm long and 45cm c/c wherever directed
including, handling,wrapping with paper for half length,
fixing, straightening necessary, wastage, etc.complete
L/s 0.45
0.45 MT.
18 Cutting of construction and dummy joints of M40 and

above concrete pavement by mechanicals means with 10
to 12 hrs. after casting of bay/slab 1/3 rd of depth of
pavement and 5 to 6 mm wide as directed.
590.00 20.00 11800.00
19 60.00 1140.00
12940.00 RMT
19 Providing and Placing 5mm thick Thermocole in dummy

and construction joints immediately after cutting of joints
and removing the same before dressing of dummy and
construction joint as directed etc. complete.
590 20 0.05 590.00
19 60.00 0.05 57.00
647.00 Sqm
20 Providing and constructing cement vatas in cm 1:10 at
o.6m to o.5m c/c admeasuring 0.09 m at bottom 0.04m at
top & 0.075m deep and maintaining the same troughout
for curing and removing the same thereafter as directed.
10.00 20.00 6.00 1200.00
1200.00 Sqm
21 Dressing of M-35 and above new C.C. pavement dummy
transverse longitudinal and expansion joints with
rubberised sealing compound confirming to IS1834-1984
after proper cleaning with compressed air applying
required primer and providing layers of lime powder over
hot sealing compund etc. completed as directed A) sealing
6mm wide dummy/transverse joints of 100mm/1/3rd thck.
of concrete
590.00 20 11800.00
19 60.00 1140.00
12940.00 Rmt
22 Providing and laying of hot applied Yellow / White
thermoplastic compound 2.5mm thick,traffic lane
edge/centre lines strips 10cm. wide, including
reflectorising glass beads @250 gms.per sqm
area,thickness of 2.5mm is exclusive of surface applied
glass beads as per IRC:35. The finished surface to be
level,uniform and free from streaks and holes
etc.complete with 3 years guarantee.
a ) White 2 50 0.15 15.00 Sq.mt

Zebra and other L/s. 800.00
815.00 Sq.mt
b ) Yellow 4 50.00 0.15 30.00 Sq.mt
23 Providing and constructing Brick Masonry Inspection

chamber with 15cm thick 1:3:6 proporation PCC
bedding ,excluding excavation,BB masonary in CM1:5
proporation precast RCC frame and cover,etc.completed
as directed by Engineer-in-charge
b) 90x60cm. 15.00 15.00 each

24 Providing and laying in situ cement concrete M20 grade
for road pavement supplying all materials, providing
steel form work,compaction by plate vibrator, providing
joints at everythirty meters internal and filling the joints
withbitumen,curing etc.complete. (Excluding cost of
reinforcement) (Newly laid concrete shall be covered
bygunny bag/plastic sheet/tarpaulin etc. for curing
periodcomplete.)
Spec. No.: As directed by Engineer-in-charge
2.00 2850.00 0.60 0.15 513.00

513 Cum
25 Dismantling cement tiles or marble or polished shahabad

floor or dado without bed concrete icluding stacking the
materials as directed with all lifts and initial lead of 50
mt. etc. complete.
2 250.00 1.50 1 750.00 Cum
26 Dismantling reinforced cement concrete work including

breaking concrete by chiseling, wedging etc. including
cutting reinforcement, stacking the serviceable materials
and debris separately upto a distance of 50 m. or
spreading etc. complete.
Gutter slab 2 250 1.20 0.125 75.00

Other structure L/s. 500.00
575.00 CUM
27 Dismantling plain cement concrete work including
breaking concrete by chiselling, wedging etc. including
cutting the reinforcement, stacking the serviceable
materials and the debris separately upto a distance of 50
metre or spreading the debris as directed etc. complete.
4 250.00 0.30 1.00 300.00 CUM
28 Dismantling Brick Masonry

L/s. 100.00 CUM
29 Dismantling Stone Masonry

L/s. 90.00 CUM
30 Supply of excavator cum loader JCB 20 8 160.00 Hrs
31 Transportation of excavated material including 13471.25

Removing debries L/s. 900.00
Total Transportation 14371.25
a)lead up to 1 Km 718.56 cum
b)lead up to 3 Km 718.56 cum
c)lead up to 5 Km 718.56 cum
d)lead up to 7 Km 1437.13 cum
e)lead up to 10 Km 4311.38 cum
f)lead up to 15 Km 5029.94 cum
g)lead up to 20 Km 1437.13 cum
32 Providing and fabricating structural steel work in rolled
sections like joist, channels, angles, tees etc. as per
detailed design and drawings or as directed by Engineer-
In-Charge. including cutting, fabricating, hoisting,
erecting, fixing in position making riveted / bolted /
welded connections with connecting plates, braces etc.
and including one coat of anticorrosive paint and over it
two coats of oil painting of approved quality and shade
etc. complete.
6 100 kg 0.60 MT
33 Providing , supplying and fixing Precast Water table of

M-25 grade etc. complete. 1 2250 2250.00 Rmt
34 Providing , supplying and fixing Precast Kerb stone of M-

25 grade and applying 3 coats of flat oil paint etc.
complete. 1 2250 2250.00 Rmt
35 Removing and resetting Water table etc. complete. 1 1000 1000.00 Rmt
36 Removing and resetting Kerb Stone etc. complete. 1 1000 1000.00 Rmt
37 Providing , supplying and fixing Precast Parabolic Central

Divider 1 50 50.00 Rmt
38 Providing , cast in situ Parabolic Central Divider 1 10 10.00 Rmt
39 Providing and laying in trenches medium grade ISI mark

GI pipes with necessary fittings including necessary
excavation trench filling applying one coat of anti-
corrosive paint and two coats of oil paint etc. complete.
a) 15 mm dia L/s. 80.00 Rmt

b) 25 mm dia L/s. 100.00 Rmt
c) 40 mm dia L/s. 80.00 Rmt
d) 50 mm dia L/s. 55.00 Rmt
40 Providing and laying in trenches medium grade ISI mark

UPVC pipes with necessary fittings including necessary
excavation trench filling applying one coat of anti-
corrosive paint and two coats of oil paint etc. complete.
a) 15 mm dia L/s. 60.00 Rmt

b) 25 mm dia L/s. 50.00 Rmt
c) 40 mm dia L/s. 30.00 Rmt
41 P/L Bituminous tack coat of 60/70 grade on W.B.M

surface, by manual / mechanical sprayer incl. supplying
all materials preparing existing surface heating bitumen &
applying bitumen @ 75 kg per 100 sq.m on the surface
etc. complete.
1 3250 5 16250.00
30 20 5 3000.00
19250.00 Sqm
42 P/L Bituminous tack coat of 60/70 grade on B.T.

surface, by manual / mechanical sprayer incl. supplying
all materials preparing existing surface heating bitumen &
applying bitumen @ 50 kg per 100 sq.m on the surface
etc. complete.
1 3250 5 16250.00
30 20 5 3000.00
Existing Side shoulder 0 0 0 0.00
LBS ROAD (TEEN HATH NAKA TO MULUND
CHECK NAKA ) 4 680 5 13600.00
32850.00 Sqm
43 P/L hotmix hotlaid Bituminous macadam 50/75 mm
average thickness with 3.3% bitumen by wt. of total mix
for leveling course to remove irregularities / base course
including diversion of traffic supply of all materials
heating bitumen 30-40 by Vibratory R
1 3250 5 0.075 1218.75

30 20 5 0.075 225
0 0 0 0.075 0
CHECK NAKA ) 2 680 5 0.075 510
1953.75 Cum
44 P/L hotmix hotlaid Bituminous Concrete 25/40 mm

compacted thickness on prepared surface with specificed
graded stone aggregate for wearing courese including
loading of aggregate with F.E. loader premixed with
bituminous binder @ 5 % of weight of
mix ......................etc complete ( for grade of bitumen
60/70)
1 3250 5 0.04 650.00

30 20 5 0.04 120.00
0 0 0 0.04 0.00
CHECK NAKA ) 2 680 5 0.04 272
1042.00 Cum
45 Providing and fixing in position steel fibre reinforced

concrete (S.F.R.C.) frame and taxes,etc.completed as
directed by Enginner-in-charge(20 tonnes capacity) b)
560 mm dia.
50 50.00 No
46 P/Fprecast SFRC rectangular chamber covers of size…..

(0.9 m x 0.70 x.04)m opening (0.9x0.6)m with
frame ,made out of steel fibre composite concrete of M35
grade as per ASTM standard and generally confirming to
IS 12592 with 28 days curing.
2166 2166.00 each
47 Raising or lowering Rectangular manhole cover to the

required level upto 30 cm including all material,
formwork etc. with 16 cm tk cement concrete M-15
(1:2:4) c.c. coping under frame and cover of manhole,
incl curing etc. complete as specified and as directed
2 2.00 each
48 Raising or lowering Circular manhole cover to the
required level upto 20 cm including all material,
formwork etc. with 16 cm tk cement concrete M-15
(1:2:4) c.c. coping under frame and cover of manhole,
incl curing etc. complete as specified and as directed
1 1.00 each
49 Providing and fixing informatory sign boards in square

and rectangular shape of any size made out of 16 Gauge
(1.6mm) thick Mild 1 1.00 Nos
50 Providing Cautionary sign boards 90cm.equilateral
triangle with apex point upward prepared on fibre
reinforced plate 3.0 1 1.00 Nos
51 Providing second class brick masonry
L/s. 50.00
50.00 CUM
52 Providing UCRM for foundation in plinth

L/s. 30.00
30.00 CUM
53 Providing Sand face plaster
L/s. 200.00
200.00 Sqm
54 Painting
L/s. 510.00
510.00 Sqm
55 Supply of Labour
14.00 14.00
14.00 Nos
THANE MUNICIPAL CORPORATION THANE
REVISED ABSTRACT
NAME OF WORK : - Widening and strengthening of LBS Road from Teen Hat Naka to Majiwada Flyover on NH 3
Sr.No. Discription Qty Rate Unit Amount
1 Excavation for roadways by manual means such as soft rock 2750.00 299.06 Cum 822415.00
including dressing section to the required camber and side
slopes and conveying the excavated materials with all lifts upto
a lead of 50 m and spreading for embankment, disposing as
directed etc. complete.
Spec. No.: Rd. 2 Page No. 351/2012
1 (a) Excavation for roadways by Mechanical means such as soft 500.00 148.47 Cum 74235.00
rock including dressing section to the required camber and side
slopes and conveying the excavated materials with all lifts upto
a lead of 50 m and spreading for embankment, disposing as
directed etc. complete.
2 Excavation for roadways by manual means such as earth soil of 1080.00 119.83 Cum 129416.40
all sorts sand, gravel or soft murum including dressing section
to the required camber and side slopes and conveying the
excavated materials with all lifts upto a lead of 50 m and
spreading for embankment, disposing as directed etc. complete.
2 (a) Excavation for roadways by Mechanical means such as earth 7626.25 63.63 Cum 485258.29
soil of all sorts sand, gravel or soft murum including dressing
section to the required camber and side slopes and conveying
the excavated materials with all lifts upto a lead of 50 m and
2 (b) Excavation for roadways by manual means such as hard 50.00 144.22 Cum 7211.00
murum and boulders including dressing section to the required
camber and side slopes and conveying the excavated materials
with all lifts upto a lead of 50 m and spreading for
embankment, disposing as directed etc. complete.
3 Excavation for foundation/pipe treches in ash muddy/ marshy/ 400.00 337.72 Cum 135088.00
slushy/soil incld. Use of poclain, labour for dewatering during
execution incld. Removing the excavated material upto a
distance of 50 m & lifts as below, stacking & spreading as
directed, etc complete.
4 Compacting sub grade / gravel / oversize metal (200mm loose) 19250.00 21.21 SQM 408292.50
layer 2 to 7 m wide with by Vibratory Roller including
necessary, labour, materials and artificial watering etc.
complete.
Spec. No.: Rd. 30 Page No. 380
5 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone 720.00 1470.64 Cum 1058860.80
soiling 15 cm to 20 cm thick including hand packing and
compacting complete.
Spec. No.: Bd.A. 12 Page No. 19
6 Providing and casting in situ cement concrete 1:2:4 of trap / 477.00 5798.25 Cum 2765765.25
granite / quartzite / gneiss metal for foundation & bedding
including centering, formwork, compacting, roughening them
if special finish is to be provided and curing and finishing if
required complete, with...........
Spec. No.: Bd.E.2 Page No. 288 and B.7 Page No 70
A) ii) without Formwork Without SCADA with concrete
mixer with hopper
7 Providing and laying concrete pipes of I.S.NP. class of ---------

diameter in proper line, level and slope including necessary
collars, excavation, laying, fixing with collars in cement mortar
1:1 and refilling the trench complete.
Spec. No.: Bd.V.41, Page No. 625
a) 150mm dia. 0.50 511.16 RMT 255.58
b) 225mm dia. 200.40 563.12 RMT 112849.25
c) 300mm dia. 20.00 805.98 RMT 16119.60
8 Providing and casting in situ cement concrete M-25 specified 1.00 5910.52 Cum 5910.52
of trap/ granite / quartzite/ gneiss metal for R.C.C. work in
foundation like raft, strip foundations, grillage and footings of
R.C.C. columns and steeel stanchions etc.including bailing out
water, formwork, cover blocks compacting and curing etc.
(Excluding reinforcement and structural steel) complete,
With.....of grade
Spec. No.: Bd.F.3 Page No. 89 page no.38
B(b) Without SCADA with concrete mixer with
hopper
of trap/ granite / quartzite/ gneiss metal for R.C.C. pardi 75mm
thick fins including centering, formwork, cover blocks
compacting and roughening them if special finish is to be
provided and curing complete. (Excluding
reinforcement).With.........
Spec. No.: Bd.F.11 Page No. 96
B(b) Without SCADA with concrete mixer with hopper
10 Providing and fixing in position TMT-Fe-500/Fe-415 bar 14.20 74403.61 MT 1056531.26

reinforcement of of TATA TISCON /SAILl /JSW /ESSAR or
equivalent make (condirming to IS code) of various diameters
for R.C.C. pile caps, footings, foundations, slabs, beams
columns, canopies, staircase, newels, chajjas, lintels pardis,
copings, fins, arches etc. as per detailed designs, drawings and
schedules. including cutting, bending, hooking the bars,
binding with wires or tack welding and supporting as required
including cover block etc. complete.
Spec. No.: Bd.F.17, Page No. 98
of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and
landings canopy as per detailed designs and drawings including
plywood/steel centering, formwork, cover blocks compacting
and roughening the surface if special finish is to be provided
and curing complete. (Excluding reinforcement).With.........
B) Without SCADA with concrete mixer with hopper
12 Dewatering using 5 to 9 H.P. pumps for all drain C.D. and road 400.00 76.03 Hrs 30412.00
construction work including diversion of stream, providing
coffer dam bund etc. as directed etc. complete
13 Providing and casting in situ cement concrete of M-20 grade of 200.00 6221.24 Cum 1244248.00
trap / granite /quartzite/ gneiss metal for bed blocks, foundation
blocks andsuch other items including bailing out water
formwork, compacting, roughening, them if special finish is to
be provided and curing and finishing ifrequired complete,
Without SCADA with concrete mixer with hopper
Spec. No.: Bd.E.4 Page No. 72 and B-7, Page No.38 .
14 Providing and laying wedge shear elemental layer (WSEL) by 1150 1500.55 Cum 1725632.50
using rubble stone of size 15 to 20 cm thick in single layer of
230 mm including packing the same with 20 mm to 40 mm
thick aggregates ( normal size) and using stone powder of 40
mm to 50 mm thick on surface and watering & compacting by
vibratory roller confirming layer thickness of minimum 200
mm and as directed by Engineer - in - charge etc complete.
15 Providing, laying, spreading and compacting stone aggregates 5775.00 2036.46 Cum 11760556.50
of specific sizes to water bound macadam for grading II by
manuals means specification including spreading in uniform
thickness, hand packing rolling with 3 wheeled steel/vibratory
roller 8-10 tonnes in stages to proper grade and camber,
applying and brooming requisite type of screening/ binding
Materials to fill up the interstices of coarse aggregate, watering
and compacting to the required density to protect edges,
lighting, guarding, barricading and maintenance of diversion
etc. complete.
..... as per techenical specification Cl. No. 405A
16 Providing and Laying M60 grade cement concrete of approved 150.00 13020.00 Cum 1953000.00
mix design with avg. Flextural strength of 4.4 MPa in 3 days
from R.M.C. plant incld. use of micro silica/alcofine, approved
make super plastiser and retarder, fibriliated 100 % virgin
polypropylene fibres, fly ash and transported by transit mixer
and placing at work site. Compacting, finishing, initial curing
by approved curing compound/ contractors water and tarring
the sides of slab with hot bitumen as specified and as directed
(w/c ratio 0.28 max.). (vatta for curing will be paid separately)
for Ultra thin White Topping (UTWT) pavement. etc
completed.
17 Providing and fixing in position Mild Steel bar reinforcement 0.45 58098.43 MT 26144.29
of of TATA TISCON /SAILl /JSW /ESSAR or equivalent
make (condirming to IS code)
foundations, slabs, beams columns, canopies, staircase, newels,
chajjas, lintels pardis, copings, fins, arches etc. as per detailed
designs, drawings and schedules. including cutting, bending,
hooking the bars, binding with wires or tack welding and
supporting as required including cover block etc. complete.
18 Green Cutting of construction & dummy joints of concrete 12940.00 57.57 Rmt 744955.80
grade M 40 and above (UTWT) pavement by mechanical
means within 10 to 12 hrs after casting of bay / slab upto 1/3 rd
depth of pavement and 5 to 6 mm wide as directed
19 Providing and Placing 5mm thick Thermocole in dummy and 647.00 56.56 Sqm 36594.32
construction joints immdtly after cutting of joints and removing
the same before dressing of dummy and construction joint as
directed etc. complt.
20 Providing and construction of cement vatta in C.M.1:10 at 0.6 1200.00 65.65 Sqm 78780.00
M X 0.6 M c/c admeasuring 0.09 meter at bottom, 0.04 m at
top and 0.075 m deep and maintaining the same throughout 7
days curing period and removing the same material as
directed.
21 Sealing of M-35 & above new C.C. pavement dummy, 12940.00 63.63 Rmt 823372.20
transverse, longitudinal joints with hot rubberised sealing
compound confirming to IS 1834-1984 after proper cleaning
with compressed air, applying required primer & providing a
layer of lime powder over hot sealing compound as directed.
Sealing 5mm - 6 mm wide & avg. depth of 40 mm transverse
& longitudinal joints
22 Providing and lyaing of hot applied themoplastic compoundn

2.5mm thick Yellow / White including reflectorising glass
beads @250 gms.per sqm area,thickness of 2.5mm is exclusive
of surface applied glass bead as per IRC 35. The finished
surface to be level, uniform and free from streaks and holes
etc.complete with 3 years gruantee Spec. No.: MORTH CI.803
Page 388/2012
a ) White 815.00 1166.55 Sq.Mt. 950738.25
b ) Yellow 30.00 1224.87 Sq.Mt. 36746.10
23 Providing & constructing Brick Masonary Inspection chamber 15.00 11976.58 No 179648.70
90 x 60 cm internal size & depth upto 1.2M with 15cm thick
1:3:6 proportion PCC bedding, excluding excavation, B.B.
masonry in C.M. 1:5 Proportion,plastering from inside &
outside as required in c.m.1:3 , 1:2:4 cement concrete haunches
at bed, precast S.F.R.C frame & cover, etc.complete as directed
by Engineer in- Charge.
a) Add for every increase in depth of 30cm or part thereof 1.00 1472.07 cm depth 1472.07
24 Providing and laying in situ cement concrete M20 grade for 513.00 6164.13 Cum 3162198.69
road pavement supplying all materials, providing steel form
work,compaction by plate vibrator, providing joints at
everythirty meters internal and filling the joints
reinforcement) (Newly laid concrete shall be covered bygunny
bag/plastic sheet/tarpaulin etc. for curing periodcomplete.)
25 Removing cement tiles, or marble or polished shahabad floor 750.00 21.21 Sqm 15907.50
or dado without bed concrete including stacking the materials
as directed with all leads, lifts, complete.
Spec. No.: As directed by Engineer in charge
26 Dismantling the R.C.C. work 1:2:4 and sorting out the 575.00 651.14 Cum 374405.50
materials such as steel etc. as directed and stacking them within
the specified lead as directed.
27 Removing lime or lean cement concrete including stacking the 300.00 251.33 Cum 75399.00
spoils as directed with all leads, lifts, complete.
28 Dismantling brick masonry in lime or cement mortar and 100.00 148.47 Cum 14847.00
stacking the materials as directed with all leads, lifts, com-
plete.
Spec. No.: As directed by Engineer in charge.
29 Dismantling stone masonry in lime or cement including 90.00 171.80 Cum 15462.00
stacking the materials as directed with all leads, lifts, complete.
30 Supply of excavator cum loader machine (like JCB machine) 160.00 1166.55 Hrs 186648.00
etc complete
31 Transportation of excavated material including loading and

unloading etc. complete.
a) Lead upto 1 Km 718.56 157.90 Cum 113461.02
b) lead up to 3 km 718.56 199.19 Cum 143130.46
c) lead up to 5 km 718.56 237.99 Cum 171010.69
d) lead up to 7 km 1437.13 276.11 Cum 396804.58
e) lead up to 10 km 4311.38 329.74 Cum 1421632.79
f) lead up to 15 km 5029.94 428.58 Cum 2155730.61
g) lead up to 20 km 1437.13 470.12 Cum 675621.21

32 Providing and fabricating structural steel work in rolled 0.60 71814.93 MT 43088.96
sections like joists, channels, angles, teesn etc. as per detailed
designs and drawing or as directed by Engineer-in-charge
including cutting, fabrication, hoisting & erecting fixing in
position with connecting plates, braces etc. and one coat of
anticorrosive paint and over it two coat of oil paintings of
approved quality and shade complete.
Spec. No.: Bd.C.2 Page No. 49
33 P/F precast M-20 grade concrete water table size 50 cm X30cm 2250.00 374.15 Rmt 841837.50
X 10cm etc. complete.
34 Providing & fixing kerb stones 30 cm to 40 cm long, 15cm 2250.00 809.82 Rmt 1822095.00
wide, 38cm deep medium dressed in all exposed surfaces, set
in cement mortar 1:2 on a 15cm thick & 25cm wide M-100
(1:3:6) C. C. bed including filling the joints with 1:2 C. M.
pointing, curing etc. complete.(in M-25 grade)
35 Removing and resetting kerb stones in 1:2 C.M., on new M100 1000.00 709.04 Rmt 709040.00
(1:3:6) c.c. bed, 15 cm, thick and 25 cm wide including filling
in the joints with C.M. 1:2 pointing, curing etc. complete
36 Removing & resetting water tables 30 cm wide on a new 1000.00 568.29 Rmt 568290.00
M100 (1:3:6) cement concrete bed 15 cm. thick including
filling in the joints with C.M. 1:2 and cement pointing, curing
including removing the old cement bed, curing etc. complete
37 Providing and fixing cast in situ parabolic central divider of M- 50.00 3885.07 Rmt 194253.50
25 grade and applying 2 coats of flat oil paint etc. complete.
38 Providing , supplying and fixing Precast parabolic central 10.00 3057.47 Rmt 30574.70
divider of M-25 grade and applying 2 coats of flat oil paint etc.
complete.
39 Providing and laying in trenches ---------- dia........... grade

Galvanised iron pipes having embossed I.S.I. mark on it, of
jindal/Tata/Zenith or equivalant make of .......... kg/metre
necessary fitting remaking good the demolished portion with
filling trenches and with primer of anti-corrosive oil paint , 2
coats complete.
Spec. No.: Bd.V.5 Page No. 596
a) 15 mm dia 80.00 272.54 Rmt 21803.20
b) 25 mm dia 100.00 423.13 Rmt 42313.00
c) 40 mm dia 80.00 602.36 Rmt 48188.80
d) 50 mm dia 55.00 779.46 Rmt 42870.30
40 Providing and laying in trenches …... mm dia. CPVC pipe of

Prince / Sudhakar / Kishan / Supreme or equivalent make
including necessary excavation, fittings. Refilling trenches etc.
complete.
Spec. No.: BD.V 5 page 596 and as directed by Engineer in
charge
a) 15 mm dia 60.00 177.10 Rmt 10626.00
b) 25 mm dia 50.00 261.94 Rmt 13097.00
c) 40 mm dia 30.00 415.71 Rmt 12471.30
41 Providing and laying bituminous tack coat, 75Kg/100 sqmtr 19250.00 55.39 Sqm 1066257.50
over .......... surface by manual/mechanical sprayer including
supplying all materials,preparing the existing surface,heating
bitumen and applying tack coat evenly on the surface etc.
complete. ( using 60/70 grade)
Spec. No.: MOST Clause C 503 / 2001
42 Providing and laying bituminous tack coat, 50Kg/100 sqmtr 32850.00 39.40 Sqm 1294290.00
over B.T. surface by manual/mechanical sprayer including
43 Providing and laying hot mix hot laid dense bituminous 1953.75 6414.04 Cum 12531430.65
macadam 50/75mm compacted thickness with 4.25% bitumen
content by weight of total mix on prepared surface with
specified graded crusher aggregates for the base / binding
course including loading of aggregates with F.E.loader, heating
of stone aggregates and bitumen and mixing in modern drum
mix type of hot mix plant transporting the hot mix to work site
laying the mixed material with sensor paver finisher to the
required grade, level and camber, rolling by power roller and
vibratory roller to achieve the desired density. (Grade of
Bitumen should be CRMB 60)
44 Providing and laying bituminous concrete with 100-120 TPH 1042.00 9689.32 Cum 10096271.44
batch type hot mix plant producing an average output of 75
tonnes per hour using crushed aggregates of specified grading
premixed with bituminous binder @ 5.4% to 5.6% of mix and
filler, transporting the hot mix to work site, laying with a
hydrostatic paver finisher with sensor control to the required
grade, level and alignment, rolling with smooth wheeled,
vibratory and tandem rollers to achieve the desired compaction
etc. complete in all respect.( Using Bitumen PMB-40 grade)
45 Providing and fixing in position steel fibre reinforced concrete 50.00 4030.70 No 201535.00
(S.F.R.C.) frame and covers of approved make including
laoding, unloading, transportation, all taxes, etc.completed as
directed by Enginner-in-charge (20 tonnes capacity) b)560 mm
dia.
46 Providing and fixing in position steel fibre reinforced concrete 2166.00 3169.68 No 6865526.88
loading, unloading, transportation, all taxes, etc.completed as
directed by Engineer-in-charge (20 tonnes capacity) d)90X60
mm
47 Raising or lowering Rectangular manhole cover to the required 2.00 2012.93 No 4025.86
level upto 30 cm including all material, formwork etc. with 16
cm tk cement concrete M-15 (1:2:4) c.c. coping under frame
and cover of manhole, incl curing etc. complete as specified
and as directed
48 Raising or lowering Circular manhole cover to the required 1.00 958.49 No 958.49
and as directed
49 Providing & fixing of retro reflectorised 600 X 800mm Facility 1.00 5423.39 No 5423.39
sign boards made out of retro reflective sheeting of high
intensity prismatic grade confirming to IRC - 67 : 2012 and
Type- IV standards of ASTM D4956-09 specifications, fixed
over 4mm thick ACP sheet supported with back support frame
of 25 x 25 x 3mm mild steel angle has approved, supported on
a mild steel angle iron post 75mm x 75mm x 6mm - 3.5 m
height, firmly fixed to the ground by means of properly
designed foundation with M20 grade cement concrete 45cm x
45cm x 60cm, 60cm below ground level as per approved
drawing. 7 years warranty for Retro Reflective Sheeting from
the original sheeting manufacturer & the certified copy of three
years outdoor exposure report from an independent test lab for
the product offered shall be submitted by the contractor.
(Bottom of board shall be at least 2.6mtr. above ground level)
50 Providing and Fixing of Retro Reflectorised 900mm 1.00 4729.83 No 4729.83

Cautionary sign boards made out of retro reflective sheeting of
High Intensity prismatic grade conforming to IRC-67: 2012 &
Type IV standards of ASTM D4956-09 specifications, fixed
over 2 mm thick Al / 4mm thick ACP sheet supported with
Back support frame of 25x25x3mm mild steel angle as
approved , supported on a mild steel angle iron post 75 mm X
75 mm X 6 mm - 3.5 mtr height, firmly fixed to the ground by
means of properly designed foundation with M20
51 Providing second class Burnt Brick masonry with 50.00 5633.90 Cum 281695.00
conventional/ I.S. type bricks in cement mortar 1:6 in
superstructure including striking joints, racking out joints,
watering and scaffolding Complete.
Spec. No.: Bd.G.5 Page No. 268
52 Providing uncoursed rubble masonry of trap/ granite / quartzite 30.00 3600.79 Cum 108023.70
/ gneiss stones in cement mortar 1:6 in foundation and plinth of
inner walls / in plinth of external walls including bailing out
water, striking joints on unexposed faces and watering
complete.
Spec. No.: Bd.H.1 Page No. 293
53 Providing sand faced plaster externally in cement mortar using 200.00 455.78 Sqm 91156.00
approved screened sand, in all positions including base coat of
15 mm thick in cement mortar 1:4 using waterproofing
compound at 1 kg per cement bag curing the same for not less
than 2 days and keeping the surface of the base coat rough to
receive the sand faced treatment 6 to 8 mm thick in cement
mortar 1:4 finishing the surface by taking out grains and curing
for fourteen days scaffolding etc.complete.
Spec. No.: Bd.L.7 Page No. 368
54 Providing and applying 2 coats of flat oil paint of approved 510.00 61.50 Sqm 31365.00
colour and shade to internal / external plastered surfaces
including scaffolding if necessary, cleaning and preparing the
surface (excluding primer coat) complete.
Spec. No.: Bd.0.7 Page No. 409
55 Supply of Labour for various works on site 15.00 423.00 Nos. 6345.00
73849976.43
REVISED Estimated Cost Rs. 73850000.00
DEDUCT PREVIOUS
ESTIMATE COST RS. 67407500.00
ADDITIONAL AMOUNT FOR

APPROVAL 6442500.00
Thane Municipal C
Note:- This rate analysis is only
LEAD CHART ( Ref: PWD DSR 2015-16 ; Stateme

It. ITEM DESCRIPTION Rate for 50 km
No. ( Rs)
1 Sand 843.60
2 Crushed Metal/ Stone dust(M1,M2)
3 Rubble
4 Hand broken metal 40mm and above
5 Murum
1. Lead distances aprroved by Hon.City Engineer on dt.19.08.04
2. Source of sand taken for lead is Vaitarna, Navja and not Gaimukh,Nagla and Tansai .(Sand Used by other
3. Source of Crushed Metal/ Stone dust, Rubble,Hand broken metal 40mm and above and Murum taken
other sources then, lead to be deducted accordingly.) Royalti
It. No ITEM DESCRIPTION As per Government Norms
per Brass
1 Sand 400
2 Crushed Metal/ Stone dust(M1,M2) 400
3 Rubble, Hand broken metal 400
4 Murum 400
5 Earth 400
Subject : Rate Analysis for Completed Items to
It. ITEM DESCRIPTION DSR YEAR

No.
1 Excavation for roadways by manual means such as soft rock including PWD 15.-16
dressing section to the required camber and side slopes and conveying the
excavated materials with all lifts upto a lead of 50 m and spreading for
Add 5% for corporation area. PWD 15.-16
Rate for completed Item
1 (a) Excavation for roadways by Mechanical means such as soft rock including PWD 15.-16
dressing section to the required camber and side slopes and conveying the
excavated materials with all lifts upto a lead of 50 m and spreading for
2 Excavation for roadways by manual means such as earth soil of all sorts PWD 15.-16
sand, gravel or soft murum including dressing section to the required camber
and side slopes and conveying the excavated materials with all lifts upto a lead
of 50 m and spreading for embankment, disposing as directed etc. complete.

2 (a) Excavation for roadways by Mechanical means such as earth soil of all sorts PWD 15.-16
sand, gravel or soft murum including dressing section to the required camber
and side slopes and conveying the excavated materials with all lifts upto a lead
of 50 m and spreading for embankment, disposing as directed etc. complete.

2 (b) Excavation for roadways by manual means such as hard murum and PWD 15.-16
boulders including dressing section to the required camber and side slopes and
conveying the excavated materials with all lifts upto a lead of 50 m and
3 Excavation for foundation/pipe treches in ash muddy/ marshy/ slushy/soil MJP 13.14.
incld. Use of poclain, labour for dewatering during execution incld. Removing
the excavated material upto a distance of 50 m & lifts as below, stacking &
spreading as directed, etc complete.
Add 10% for MMRDA area.
4 Compacting sub grade / gravel / oversize metal (200mm loose) layer 2 to 7 m PWD 15.-16
wide with by Vibratory Roller including necessary, labour, materials and
artificial watering etc. complete.
Add 5% for corporation area.
5 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soiling 15 cm to 20 PWD 15.-16
cm thick including hand packing and compacting complete.
Total
ADD FOR LEAD
1. RUBBLE (15 KM. LEAD) PWD 15.-16
1. Quarry spoil (15 KM. LEAD) PWD 15.-16
Total lead
Add for royalty of RUBBLE and quarry spoil PWD 15.-16
6 Providing and casting in situ cement concrete 1:2:4 of trap / granite / PWD 15.-16
quartzite / gneiss metal for foundation & bedding including centering,
formwork, compacting, roughening them if special finish is to be provided and
curing and finishing if required complete, with...........
Spec. No.: Bd.E.2 Page No. 288 and B.7 Page No 70 A) ii)
without Formwork Without SCADA with concrete mixer with hopper

Total
Add for Lead :
for Sand (50 Km lead) for 0.44cum/ 1 cum PWD 15.-16
For Aggregate (15 Km) 0.89cum / 1 cum PWD 15.-16
Total lead Amt.
7 Providing and laying concrete pipes of I.S.NP. class of --------- diameter in

proper line, level and slope including necessary collars, excavation, laying,
fixing with collars in cement mortar 1:1 and refilling the trench complete.
a) 150mm dia. PWD 15.-16

Total
b) 225mm dia. PWD 15.-16
Total
c) 300mm dia. PWD 15.-16
Total
8 Providing and casting in situ cement concrete M-25 specified of trap/ granite / PWD 15.-16
quartzite/ gneiss metal for R.C.C. work in foundation like raft, strip
foundations, grillage and footings of R.C.C. columns and steeel stanchions
etc.including bailing out water, formwork, cover blocks compacting and curing
etc. (Excluding reinforcement and structural steel) complete, With.....of grade
Add 5% for Corporation Limit
Add for Lead :

For Sand (50 Km) PWD 15.-16
For Aggregate (15 Km) PWD 15.-16
quartzite/ gneiss metal for R.C.C. pardi 75mm thick fins including centering,
formwork, cover blocks compacting and roughening them if special finish is to
be provided and curing complete. (Excluding reinforcement).With.........
Spec. No.: Bd.F.11 Page No. 96 B(b)
Without SCADA with concrete mixer with hopper
Add for Lead :

10 Providing and fixing in position TMT-Fe-500/Fe-415 bar reinforcement of of PWD 15.-16

TATA TISCON /SAILl /JSW /ESSAR or equivalent make (condirming to IS
code) of various diameters for R.C.C. pile caps, footings, foundations, slabs,
beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings,
fins, arches etc. as per detailed designs, drawings and schedules. including
cutting, bending, hooking the bars, binding with wires or tack welding and
supporting as required including cover block etc. complete.
B)Mild Steel PWD 15.-16

quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed
designs and drawings including plywood/steel centering, formwork, cover
blocks compacting and roughening the surface if special finish is to be
provided and curing complete. (Excluding reinforcement).With.........
Spec. No.: Bd.F.8 Page No. 93 B) Without
SCADA with concrete mixer with hopper
Add for Lead :

12 Dewatering using 5 to 9 H.P. pumps for all drain C.D. and road construction PWD 13.-14
work including diversion of stream, providing coffer dam bund etc. as directed
etc. complete
13 Providing and casting in situ cement concrete of 1:2:4 grade of trap / granite PWD 15.-16
/quartzite/ gneiss metal for bed blocks, foundation blocks and such other items
including bailing out water formwork, compacting, roughening, them if special
finish is to be provided and curing and finishing if required complete, without
Formwork Without SCADA with concrete mixer with hopper
Spec. No.: Bd.E.4 Page No. 72 and B-7, Page No.38

Total
Add for Lead :
Total lead Amt.
14 Providing and laying wedge shear elemental layer (WSEL) by using rubble Cosider 10 m
stone of size 15 to 20 cm thick in single layer of 230 mm including packing the
same with 20 mm to 40 mm thick aggregates ( normal size) and using stone
powder of 40 mm to 50 mm thick on surface and watering & compacting by
vibratory roller confirming layer thickness of minimum 200 mm and as
directed by Engineer - in - charge etc complete.
Consider 10 m x 3.5 m x 0.23 m = 8.05 m3 (85% rubble, 15% Kapachi for

voids)
1) Rubble PWD 15-16.
Add 10% contractors profit
Add For Royalti Rubble PWD 15-16.
2) Laying 15 to 23 cm. trap stone/ laterial stone rubble soiling including hand PWD 15-16.
packing with rubble chips etc. complete.
3) filling voids with kapchi/ metal PWD 15-16.


Add For Royalti Kapchi PWD 15-16.
4) Spreading Kapachi/metal PWD 15-16.

5) supplying stone grit PWD 15-16.

Deduct 1/3 rd for second layer

Add For Royalti Stone Grit PWD 15-16.
6) Spreading gravel / hard murum / soft murun & stone dust over the rubble PWD 15-16.
soiling,oversize and size metal layer/blandage on W.B.M. surface
etc.complete.
Deduct 1/3 rd for second layer
7) Compacting sub grade / gravel / oversize metal

(200mm loose) layer 2 to 7 m wide with Vibratory Roller including necessary,
labour, materials and artificial watering etc. complete.
Deduct for non watering
15 km lead for rubble PWD

15 km lead for kapchi PWD
15 km lead for stone grit PWD
Total of 1+2+3+4+5+6+7+8
Rate of 1 Cum W.S.E.L.
15 Providing, laying, spreading and compacting stone aggregates of specific sizes PWD 15.-16
to water bound macadam for grading II by manuals means specification
including spreading in uniform thickness, hand packing rolling with 3 wheeled
steel/vibratory roller 8-10 tonnes in stages to proper grade and camber,
applying and brooming requisite type of screening/ binding Materials to fill up
the interstices of coarse aggregate, watering and compacting to the required
density to protect edges, lighting, guarding, barricading and maintenance of
diversion etc. complete.

Add For Royalti Stone Grit PWD 15.-16
Add For Royalti Metal PWD 15.-16
Add for lead for metal PWD 15.-16
Add for lead for Stone Grit PWD 15.-16
16 Providing and Laying M60 grade cement concrete of approved mix design As per Rate Analysis attached
with avg. Flextural strength of 4.4 MPa in 3 days from R.M.C. plant incld. use
of micro silica/alcofine, approved make super plastiser and retarder, fibriliated
100 % virgin polypropylene fibres, fly ash and transported by transit mixer and
placing at work site. Compacting, finishing, initial curing by approved curing
compound/ contractors water and tarring the sides of slab with hot bitumen as
specified and as directed (w/c ratio 0.28 max.). (vatta for curing will be paid
separately) for Ultra thin White Topping (UTWT) pavement. etc
completed.
17 Providing and fixing in position Mild Steel bar reinforcement of of TATA PWD 15.-16
TISCON /SAILl /JSW /ESSAR or equivalent make (condirming to IS code)
of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams
columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins,
arches etc. as per detailed designs, drawings and schedules. including cutting,
bending, hooking the bars, binding with wires or tack welding and supporting
as required including cover block etc. complete.
Add 5% for Corporation Limit PWD 15.-16

18 Green Cutting of construction & dummy joints of concrete grade M 40 and BMC FMR 2013
above (UTWT) pavement by mechanical means within 10 to 12 hrs after
casting of bay / slab upto 1/3 rd depth of pavement and 5 to 6 mm wide as
directed
19 Providing and Placing 5mm thick Thermocole in dummy and construction BMC FMR 2013
joints immdtly after cutting of joints and removing the same before dressing of
dummy and construction joint as directed etc. complt.
20 Providing and construction of cement vatta in C.M.1:10 at 0.6 M X 0.6 M c/c BMC FMR 2013
admeasuring 0.09 meter at bottom, 0.04 m at top and 0.075 m deep and
maintaining the same throughout 7 days curing period and removing the same
material as directed.
21 Sealing of M-35 & above new C.C. pavement dummy, transverse, longitudinal BMC FMR 2013
joints with hot rubberised sealing compound confirming to IS 1834-1984 after
proper cleaning with compressed air, applying required primer & providing a
layer of lime powder over hot sealing compound as directed. Sealing 5mm - 6
mm wide & avg. depth of 40 mm transverse & longitudinal joints
22 Providing and lyaing of hot applied themoplastic compoundn 2.5mm thick

Yellow / White including reflectorising glass beads @250 gms.per sqm
area,thickness of 2.5mm is exclusive of surface applied glass bead as per IRC
35. The finished surface to be level, uniform and free from streaks and holes
etc.complete with 3 years gruantee Spec. No.: MORTH CI.803 Page 388/2012
a) White PWD 15.-16


b) Yellow PWD 13.-14
23 Providing & constructing Brick Masonary Inspection chamber 90 x 60 cm MJP 13.-14

internal size & depth upto 1.2M with 15cm thick 1:3:6 proportion PCC
bedding, excluding excavation, B.B. masonry in C.M. 1:5
Proportion,plastering from inside & outside as required in c.m.1:3 , 1:2:4
cement concrete haunches at bed, precast S.F.R.C frame & cover, etc.complete
as directed by Engineer in- Charge.
a) Add for every increase in depth of 30cm or part thereof MJP 13.-14
24 Providing and laying in situ cement concrete M20 grade for road pavement PWD 15.-16
supplying all materials, providing steel form work,compaction by plate
vibrator, providing joints at everythirty meters internal and filling the joints
withbitumen,curing etc.complete. (Excluding cost of reinforcement) (Newly
laid concrete shall be covered bygunny bag/plastic sheet/tarpaulin etc. for
curing periodcomplete.)
Total
Add for Lead :
for Sand (50 Km lead) PWD 15.-16
Total lead Amt.
25 Removing cement tiles, or marble or polished shahabad floor or dado without PWD 15.-16
bed concrete including stacking the materials as directed with all leads, lifts,
complete.
26 Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel PWD 15.-16
etc. as directed and stacking them within the specified lead as directed.
27 Removing lime or lean cement concrete including stacking the spoils as PWD 15.-16
directed with all leads, lifts, complete.

Removing rich mix cement concrete including stacking the spoils as directed PWD 15.-16
with all leads, lifts, complete.

28 Dismantling brick masonry in lime or cement mortar and stacking the PWD 15.-16
materials as directed with all leads, lifts, com-plete.
29 Dismantling stone masonry in lime or cement including stacking the materials PWD 15.-16
30 Supply of excavator cum loader machine (like JCB machine) etc complete MJP 13-14.
31 Transportation of excavated material including loading and unloading etc.
complete.
a) Lead upto 1 Km PWD 15.-16
b) lead up to 3 km PWD 15.-16
c) lead up to 5 km PWD 15.-16
d) lead up to 7 km PWD 15.-16
e) lead up to 10 km PWD 15.-16
f) lead up to 15 km PWD 15.-16
g) lead up to 20 km PWD 15.-16
32 Providing and fabricating structural steel work in rolled sections like joists, PWD 15.-16
channels, angles, teesn etc. as per detailed designs and drawing or as directed
by Engineer-in-charge including cutting, fabrication, hoisting & erecting fixing
in position with connecting plates, braces etc. and one coat of anticorrosive
paint and over it two coat of oil paintings of approved quality and shade
complete.
33 P/F precast M-20 grade concrete water table size 50 cm X30cm X 10cm etc.
complete.
Cost of M-20 Gr.concrete PWD 15.-16
Total
Add for Lead :
Total lead Amt.
size 0.5 X0.3 X0.10 ( for 100 M)

a)cost of M20 concrete
2) Transportation
considering lead of 8 km
Wt. Of water table=0.049 cum PWD 15.-16
3) Labour for fixing, Curing
Skilled Mason PWD 15.-16
Mazdoor PWD 15.-16
3) P/filling Joints
PWD 15.-16
Rate for 100 M
Rate per Meter
34 Providing & fixing kerb stones 30 cm to 40 cm long, 15cm wide, 38cm deep
medium dressed in all exposed surfaces, set in cement mortar 1:2 on a 15cm
thick & 25cm wide M-100 (1:3:6) C. C. bed including filling the joints with
1:2 C. M. pointing, curing etc. complete.(in M-25 grade)
For 100m Length
Size of kerb stone 0.5 x0.15x0.40 m
1) M-20 concrete cost PWD 15.-16
Ref above It.No.36

2) 1:2:4 PCC bed concrete cost PWD 15.-16
c) cost of soling (as per It. No. 6 )
3) Transportation
Wt. Of divider=0.053cum PWD 15.-16
4) Labour for fixing, curing
Skilled Meson PWD 15.-16
Mazdoor PWD 15.-16
5)Painting
a)P/A one priming coat PWD 15.-16
b)P/A two coats of flat oil paint PWD 15.-16

Total a+b
6) P/filling Joints
PWD 15.-16
Cost for 100 m length = 1+2+3+4+5+6

Cost for 1m length
35 Removing and resetting kerb stones in 1:2 C.M., on new M100 (1:3:6) c.c.
bed, 15 cm, thick and 25 cm wide including filling in the joints with C.M. 1:2
pointing, curing etc. complete
For One meter length
1) M-15 PCC bed concrete cost 15-16.

Skilled Mason PWD 15-16.
Mazdoor PWD 15-16.
Add 10% for contractor's proffit

3)Painting
a)P/A one priming coat PWD 15-16.
b)P/A two coats of flat oil paint PWD 15-16.

Total a+b
4) P/filling Joints
PWD 15-16.
Cost for 1.0 m length = 1+2+3+4+5+6
Cost for 1m length
36 Removing & resetting water tables 30 cm wide on a new M100 (1:3:6) cement
concrete bed 15 cm. thick including filling in the joints with C.M. 1:2 and
cement pointing, curing including removing the old cement bed, curing etc.
complete
For One meter length
1) M-15 PCC bed concrete cost 15-16.

Skilled Mason PWD 15-16.
Mazdoor PWD 15-16.
Add 10% for contractor's proffit
3) P/filling Joints
PWD 09-10.
Cost for 1.0 m length = 1+2+3

Cost for 1m length
37 Providing and fixing cast in situ parabolic central divider of M-25 grade and
applying 2 coats of flat oil paint etc. complete.
For 1.22 m length

1) M-25 concrete cost
Ref above It.No.26a

2) P/f reinforcement
a) verticle bar 8mm @ 250 c/c
b) Horizontal bar 8mm @ 250 c/c
c)Top and bottom bar 8mm @ 250 c/c
d) distribution bars 6mm @ 2X 4 Nos
As specified in It.No.19
3) Painting of divider

Total a+b
Cost for 1.22m length = 1+2+3
Cost for 1m length
38 Providing , supplying and fixing Precast parabolic central divider of M-25

grade and applying 2 coats of flat oil paint etc. complete.
For 0.30 m length
1) M-25 concrete cost
Ref above It.No.26a

2) P/f reinforcement
a) verticle bar 8mm @ 2 nos.
b) Horizontal bar 6 mm @
3) Transportation
Wt. Of divider=0.045 cum X 2.5 t/ cum=0.11 t PWD 15-16.
4) Labour for fixing, Curing
Skilled Meson PWD 15-16.
Mazdoor PWD 15-16.
5)Painting

Total a+b
6) P/filling Joints
PWD 15-16.
Cost for 0.3 m length = 1+2+3+4+5+6
Cost for 1m length
40 Providing and laying in trenches ---------- dia........... grade Galvanised iron
pipes having embossed I.S.I. mark on it, of jindal/Tata/Zenith or equivalant
make of .......... kg/metre necessary fitting remaking good the demolished
portion with filling trenches and with primer of anti-corrosive oil paint , 2
coats complete.
Heavy Type
a) 15 mm dia PWD 15.-16
b) 25 mm dia PWD 15.-16

c) 40 mm dia PWD 15.-16

d) 50 mm dia PWD 15.-16

41 Providing and laying in trenches …... mm dia. CPVC pipe of Prince /

Sudhakar / Kishan / Supreme or equivalent make including necessary
excavation, fittings. Refilling trenches etc. complete.
Spec. No.: BD.V 5 page 596 and as directed by Engineer in charge
a) 15 mm dia PWD 15.-16
b) 25 mm dia PWD 15.-16

c) 40 mm dia PWD 15.-16

42 Providing and laying bituminous tack coat, 75Kg/100 sqmtr over ..........
surface by manual/mechanical sprayer including supplying all
materials,preparing the existing surface,heating bitumen and applying tack
coat evenly on the surface etc. complete. ( using 60/70 grade)
Rate of completed item (with bulk asphalt 60/70 grade) PWD 15.-16
Add 5% for corporation Area
A
B Add lead for bitumen (60/70) grade for 15 Km. PWD 15.-16
1.00 Kg / Sqm.as per Spec
( Rs 339.47/ MT for 15 km )
Total Rate (A+B)
Rate of completed Item
43 Providing and laying bituminous tack coat, 50Kg/100 sqmtr over B.T. surface
by manual/mechanical sprayer including supplying all materials,preparing the
existing surface,heating bitumen and applying tack coat evenly on the surface
etc. complete. ( using 60/70 grade)
Add lead for bitumen (60/70) grade for 15 Km. PWD 15.-16
1.00 Kg / Sqm.as per Spec
( Rs 339.47/ MT for 15 km )
Total Rate (A+B)
44 Providing and laying hot mix hot laid dense bituminous macadam 50/75mm
compacted thickness with 4.25% bitumen content by weight of total mix on
prepared surface with specified graded crusher aggregates for the base /
binding course including loading of aggregates with F.E.loader, heating of
stone aggregates and bitumen and mixing in modern drum mix type of hot mix
plant transporting the hot mix to work site laying the mixed material with
sensor paver finisher to the required grade, level and camber, rolling by power
roller and vibratory roller to achieve the desired density. (Grade of Bitumen
should be CRMB 60)
Total Rate
( Rs 339.47/ MT for 15 km )
Add lead for metal PWD 15.-16
Total Rate (A+B)
45 Providing and laying bituminous concrete with 100-120 TPH batch type hot
mix plant producing an average output of 75 tonnes per hour using crushed
aggregates of specified grading premixed with bituminous binder @ 5.4% to
5.6% of mix and filler, transporting the hot mix to work site, laying with a
hydrostatic paver finisher with sensor control to the required grade, level and
alignment, rolling with smooth wheeled, vibratory and tandem rollers to
achieve the desired compaction etc. complete in all respect.( Using Bitumen
PMB-40 grade)
Total Rate
( Rs 339.47/ MT for 15 km )
Add lead for metal
Total Rate (A+B)
46 Providing and fixing in position steel fibre reinforced concrete (S.F.R.C.) MJP 13.14.
frame and covers of approved make including laoding, unloading,
transportation, all taxes, etc.completed as directed by Enginner-in-charge (20
tonnes capacity) b)560 mm dia.
47 Providing and fixing in position steel fibre reinforced concrete (S.F.R.C.)

frame and covers of approved make including loading, unloading,
transportation, all taxes, etc.completed as directed by Engineer-in-charge (20
tonnes capacity) d)90X60 mm
MJP 13.-14
48 Raising or lowering Rectangular manhole cover to the required level upto 30 BMC FMR 2013
cm including all material, formwork etc. with 16 cm tk cement concrete M-15
(1:2:4) c.c. coping under frame and cover of manhole, incl curing etc. complete
as specified and as directed
49 Raising or lowering Circular manhole cover to the required level upto 20 cm BMC FMR 2013
including all material, formwork etc. with 16 cm tk cement concrete M-15
(1:2:4) c.c. coping under frame and cover of manhole, incl curing etc. complete
50 Providing & fixing of retro reflectorised 600 X 800mm Facility sign boards PWD 15.-16
made out of retro reflective sheeting of high intensity prismatic grade
confirming to IRC - 67 : 2012 and Type- IV standards of ASTM D4956-09
specifications, fixed over 4mm thick ACP sheet supported with back support
frame of 25 x 25 x 3mm mild steel angle has approved, supported on a mild
steel angle iron post 75mm x 75mm x 6mm - 3.5 m height, firmly fixed to the
ground by means of properly designed foundation with M20 grade cement
concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved
drawing. 7 years warranty for Retro Reflective Sheeting from the original
sheeting manufacturer & the certified copy of three years outdoor exposure
report from an independent test lab for the product offered shall be submitted
by the contractor. (Bottom of board shall be at least 2.6mtr. above ground
level)
51 Providing and Fixing of Retro Reflectorised 900mm Cautionary sign boards PWD 15.-16
made out of retro reflective sheeting of High Intensity prismatic grade
conforming to IRC-67: 2012 & Type IV standards of ASTM D4956-09
specifications, fixed over 2 mm thick Al / 4mm thick ACP sheet supported
with Back support frame of 25x25x3mm mild steel angle as approved ,
supported on a mild steel angle iron post 75 mm X 75 mm X 6 mm - 3.5 mtr
height, firmly fixed to the ground by means of properly designed foundation
with M20
52 Providing second class Burnt Brick masonry with conventional/ I.S. type PWD 15.-16
bricks in cement mortar 1:6 in superstructure including striking joints, racking
out joints, watering and scaffolding Complete.
Total
Add for Lead :
For bricks (15 Km) PWD 15.-16
53 Providing uncoursed rubble masonry of trap/ granite / quartzite / gneiss stones PWD 15.-16
in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of
external walls including bailing out water, striking joints on unexposed faces
and watering complete.
Total
Add for Lead :
For rubbles (15 Km) PWD 15.-16
54 Providing sand faced plaster externally in cement mortar using approved PWD 15.-16
screened sand, in all positions including base coat of 15 mm thick in cement
mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the
same for not less than 2 days and keeping the surface of the base coat rough to
receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4
finishing the surface by taking out grains and curing for fourteen days
scaffolding etc.complete.

Total
Add for Lead :
for Sand (50 Km lead) PWD 15.-16
55 Providing and applying 2 coats of flat oil paint of approved colour and shade PWD 15.-16
to internal / external plastered surfaces including scaffolding if necessary,
cleaning and preparing the surface (excluding primer coat) complete.

Total
13 Providing and casting in situ cement concrete of M-20 grade of trap / granite PWD 15.-16
/quartzite/ gneiss metal for bed blocks, foundation blocks andsuch other items
including bailing out water formwork, compacting, roughening, them if special
finish is to be provided and curing and finishing ifrequired complete, Without
SCADA with concrete mixer with hopper

Total
Add for Lead :
44 Supply and fixing 0.56m internal dia. Circular C.I. air tight cover and BMC FMR 2013
frame weighing Between weighing minimum 208 kg of material grade of min.
FG 150 conforming to IS 210 :2009 and specificationon SP -SWD-3 with the
grade designation of HD 20 conforming to IS 1726 : 1991, including testing as
per CL 10 and and inspection as per CL-10 of IS 1726 : 1991, as per
specification as per standard specification no.IS SP. SWD-3 etc. complete as
specified and as per directed.1726 : 1991,
48 Providing and laying 450 mm diameter half round cement concrete pipes of
IS, NP – 2 class in proper line, level and slope, including fixing in cement
mortar 1:3 complete.
Laying of pipe PWD 15.-16
Add for material of pipe(For 1 mtr. Length) PWD 15.-16
Add extra (5%) cost for half round PWD 15.-16

Total
2 Milling upto 60 mm depth asphaltic surface by using milling machine incld. BMC FMR 2013
Transportation as directed. Note - for further passes of 60mm or part thereof,
same rate will be applicable.
7 Pumping of pavement concrete by static pump as directed by Engineer-In- MJP 13-.14

charge etc complete
hane Municipal Corporation, Thane.
e analysis is only for UTWT tender above 25 Lacs.
Public Works
DSR 2015-16 ; Statement C page No. 249,250)
0 km Rate for 15 km Rate for 5 km ( Rs) Amount Unit
( Rs) ( Rs) ( Rs)
843.60 245.88 597.72 Cum
442.79 245.88 196.91 Cum
541.71 300.81 240.90 Cum
462.92 257.06 205.86 Cum
424.34 235.64 188.70 Cum
ansai .(Sand Used by other sources then, lead to be deducted accordingly.)

above and Murum taken for lead is Dahisar -Mori, Bhiwandi ,Turbhe Padgha and not Nagla.( Used by
Royalti Charges
overnment Norms Royalti for per Cum
per Brass
400 0 As these are factory product, are already paid by the quarry owner, same
400 0 should not be considered in the RA
400 141.25
400 141.25
400 141.25
r Completed Items to be used for Road work..
Page ITEM Rate L B D/H QTY Amount Unit

No.
( Rs)
157 3A(iv) 282.00 282.00
1 14.10
296.10 Cu.Mt.
157 3B (iv) 140.00 140.00
1 7.00
147.00 Cu.Mt.
157 3A (i) 113.00 113.00
1 5.65
118.65 cum
157 3B (i) 60.00 60.00
1 3.00
63.00 cum
157 3A (iii) 136.00 136.00
1 6.80
142.80 cum
38 10 301.00 301.00
30.10
331.10
331.10 m3
161 24 (b) 20.00 20.00
1.00
21.00 Sqm
9 5 950.00 950.00
1 47.50
997.50
249 240.90 1 240.90

249 240.90 0.2 48.18
289.08
141.25 1.2 169.50
1456.08
1456.08 Cum
16 1A(ii) 5021 5021.00
251.05
5272.05
597.72 0.445 265.99
196.91 1.03 202.82
468.80
5740.85
5740.85 Cum
136 46(b) 482 482.00

24.10
506.10
506.10 Rmt
136 46(c) 531 531.00
26.55
557.55
557.55 Rmt
136 46(d) 760 760.00
38.00
798.00
798.00 Rmt
18 1B(b) 5172.00 5172.00
258.60
5430.60
597.72 0.425 254.03

196.91 0.85 167.37
421.40
5852.00
5852.00 Cum
19 6B(b) 9342.00 9342.00
467.10
9809.10
597.72 0.425 254.03

196.91 0.85 167.37
421.40
10230.50
10230.50 Cum
22 10(a) 70159.00 70159.00
3507.95
73666.95
73666.95 MT
22 10(b) 54784 54784.00

2739.20
57523.20
57523.20 MT
19 4B(b) 8067.00 8067.00
403.35
8470.35
597.72 0.425 254.03

196.91 0.85 167.37
421.40
8891.75
8891.75 Cum
155 3 (B)(ii) 71.00 71.00
1 3.55
74.55
74.55 Hr
17 3B (i) 5165 5165.00
258.25
5423.25
597.72 0.445 265.99
196.91 1.03 202.82
468.80
5892.05
5892.05 Cum
Cosider 10 m X3.5 mX0.23 m = 8.050cum (85%rubble, 15% metal for voids)
252 9 328 0.85 8.05 6.84 2244.34

224.43
2468.77
2 141.25 6.84 966.50

3435.28
161 20 125 0.85 8.05 6.84 855.31
42.77
898.08
252 8 235 0.15 8.05 1.21 283.76
28.38
312.14
15.61
2 141.25 1.21 170.56
498.31
161 21 48 0.15 8.05 1.21 57.96
2.90
60.86
277 22 413 10 3.5 0.05 1.75 722.75
413 -0.58 -240.92
481.83
48.18
530.02
26.50
2 141.25 1.17 164.79
721.31
161 22 29 10 3.5 0.05 1.75
-0.58
1.17 33.83
1.69
35.53
161 24 (b ) 20 1 10 3.5 35.00 1400.00
1 -1 10 3.5 -35.00 -35.00

1365.00
68.25
1433.25
249 St.C 541.71 6.84 3706.65
249 St.C 541.71 1.21 654.11
249 St.C 442.79 1.17 516.59
4877.35
11959.96
10 3.5 0.23 8.05 1485.71
1485.71 Cum
163 29 B (i) 1405 1405.00
70.25
2 141.25 0.28 39.55
2 141.25 1.32 186.45
196.91 1.32 259.92
196.91 0.28 55.13
2016.31
2016.30 Cum
per Rate Analysis attached 13020.00 13020.00 Cum
22 10 (b) 54784.00 54784.00
1 2739.20
57523.20 MT
35 RW-10-53 57 57.00 Rmt

29 RW-10-14 56 56.00 Sqm
30 RW-10-19 65 65.00 Sqm
30 RW-10-20 63 63.00 Rmt
176 60 1100.00 1100.00

55.00
1155.00
1155.00 Sq.Mt
176 60 1155.00 1155.00
57.75
1212.75
1212.75 Sq.Mt
311 3(C) 10780.00 10780.00
1078.00
11858.00
11858.00 No
311 3(Ca) 1325.00 1325.00

132.50
1457.50
1457.50 30cm
depth
168 42 A 5366 5366.00

268.30
5634.30
597.72 0.445 265.99

196.91 1.03 202.82
468.80
6103.10
6103.10 Cum
144 23 20 20.00
1.00
21.00 Sqm
145 32 614.00 614.00
30.70
644.70
644.70 cum
143 12 237.00 237.00
11.85
248.85
248.85 cum
143 13 399.00 399.00
19.95
418.95
418.95 cum
142 9 140.00 140.00
7.00
147.00
147.00 No
143 11 162.00 162.00
8.10
170.10
170.10 No
13 13 1155.00 1155.00 Hr
249 Sta-C1 156.34 156.34
156.34 cum
249 Sta-C1 197.22 197.22
197.22 cum
249 Sta-C1 235.64 235.64
235.64 cum
249 Sta-C1 273.38 273.38
273.38 cum
249 Sta-C1 326.48 326.48
326.48 cum
249 Sta-C1 424.34 424.34
424.34 cum
249 Sta-C1 465.47 465.47
465.47 cum
14 1 67718.00 67718.00
3385.90
71103.90
71103.90 MT
17 3A(ii) 5471.00 5471.00

273.55
5744.55
597.72 0.425 254.03

196.91 0.85 167.37
421.40
6165.95
6165.95 200.00 0.5 0.3 0.1 3 18497.86
249 Stat C1 290.90 3 872.70
281 497 10 4970.00

282 423 30 12690.00
17660.00
17660.00
198*0.30*0.025*.1 0.1485
49 9 95 0.1485 14.11
0.71
14.81
37045.38
370.45
370.45 Rmt
17 1 (e) 200.00 0.5 0.15 0.4 6.000
6165.95 6.000 36995.73

17 1( c) 5798.25 100 0.25 0.1 2.50 14495.63
1470.64 100 0.25 0.15 3.75 5514.90
249 Stat C1 290.90 6.000 1745.40
281 497 10 4970.00

282 423 30 12690.00
17660.00
17660.00
72 12 17 100*(0.075+0.10+0.3) 47.500 807.50

40.38
847.88
71 7 58 47.500 2755.00
137.75
2892.75
3740.63
198*(.15*0.4*0.025) 0.297
49 9 95 0.297 28.22
1.41
29.63
80181.90
801.82
801.81 Rmt
5798.25 1 0.25 0.15 0.04 217.43
497 0.2 99.40

423 0.6 253.80
353.20
35.32
388.52
388.52
72 12 17 0.3*(0.075+0.105+0.225) 1.215 20.66

1.03
21.69
71 7 58 0.3*(0.075+0.105+0.225) 1.215 70.47
3.52
73.99
95.68
3*(0.15*0.38*0.025) 0.004275
49 9b 89 0.004275 0.38
702.02
702.02 702.02
702.02 Rmt
5798.25 1 0.3 0.1 0.03 173.95
497 0.2 99.40

423 0.6 253.80
353.20
35.32
388.52
388.52
3*(0.10*0.30*0.025) 0.00225
49 9b 89 0.00225 0.20
562.67
562.67 562.67
562.67 Rmt
1.22 0.2 0.35 0.085

1.22 0.0572 0.069
1.22 0.2 0.6 0.146
1.22 0.35 0.15 0.064
10230.50 0.365 3732.60
5 2 0.39 3.9
10 1.22 0.39 4.758
10 0.65 0.39 2.535
8 1.22 0.22 2.1472
58.10 13.3402 775.04
72 12 17 1.22*((0.2+2(0.35+0.314+0.2)) 2.352 39.99
2.00
41.99
71 7 58 1.22*((0.2+2(0.35+0.314+0.2)) 2.352 136.43
6.82
143.25
185.23
4692.88
4692.88 1.22 3846.62
3846.61 Rmt
0.3 (0.09+0.14 0.46 0.015

)/2
0.3 (0.14+0.3) 0.29 0.019
-0.3 (2/3* 0.03 -0.001
0.33)
0.3 0.3 0.08 0.007
0.3 0.22 0.08 0.005
10230.50 0.045 465.28
58.10 2(0.08+1+0.15+0.07+0. 0.39 2.336 135.72

07+0.75+0.15+0.075+0
58.10 (0.655+0.859+0.963+2 0.22 0.8 0.05
*0.58) 135.76
249 Stat C-1 290.90 0.11 32.00
497.00 0.1 49.70

423.00 0.45 190.35
240.05
72 12 17 0.3*(0.09+0.465+0.35+0.08) 0.295 5.02

0.25
5.27
71 7 58 0.3*(0.09+0.465+0.35+0.08) 0.295 17.11
0.86
17.97
23.23
(0.09+0.14)/2*0.46 0.052
(0.14+0.3)/2*0.29 0.063
(-) 2/3*0.33*0.33 -0.006
0.3*0.8 0.024
49 9b 89 0.133 11.84
908.16
908.16 3027.22
3027.20 Rmt
122 5A (a) 257.00 257.00
12.85
269.85
269.85 Rmt
122 5A (c) 399.00 399.00

19.95
418.95
418.95 Rmt
122 5A (e) 568.00 568.00

28.40
596.40
596.40 Rmt
122 5A(f) 735.00 735.00

36.75
771.75
771.75 Rmt
123 7(a) 167.00 167.00

8.35
175.35
175.35 Rmt
123 7(c) 247.00 247.00

12.35
259.35
259.35 Rmt
123 7(e) 392.00 392.00

19.60
411.60
411.60 Rmt
164 34(b) 52 52.00
2.60
54.60
249 St.C1 339.47
0.33947 0.7500 0.25
54.85
Rs. 54.85 sqm
164 34(a) 37 37.00

1.85
38.85
249 St.C1 339.47
0.33947 0.50 0.17
39.02
Rs. 39.01 sqm
165 37 5442.00 1.00 5442.00

272.10
5714.10
249 St.C1 339.47
0.33947 74.8000 25.39
299 3B 442.79 1.38 611.05
6350.54
6350.54 Cum
167 40 8473.00 1.00 8473.00
423.65
8896.65
249 St.C1 339.47
0.33947 122 41.42
302 12 442.79 1.48 655.33
9593.39
9593.39 Cum
315 17b 3628.00 3628.00
362.80
3990.80
3990.80 No
315 17 d 2853.00 2853.00

285.30
3138.30
3138.30 No
22 RW-6-05 1993.00 1993.00 No.
22 RW-6-03 949.00 949.00 No.

170 51 5114.00 5114.00
255.70
5369.70
5369.70 No
171 53 4460.00 4460.00
223.00
4683.00
4683.00 No
26 4 4984.00 4984.00
249.20
5233.20
597.72 0.32 191.27

323.49 0.475 153.66
344.93
5578.13
5578.12 Cum
29 1 2930.00 2930.00
146.50
3076.50
597.72 0.35 209.20

240.90 1.16 279.44
488.65
3565.15
3565.14 Cum
49 5 411.00 411.00
20.55
431.55
597.72 0.033 19.72

19.72
451.27
451.27 Cum
71 7 58.00 58.00
2.90
60.90
60.90 Cum
17 3B(ii) 5465.00 5465.00
273.25
5738.25
597.72 0.425 254.03

196.91 0.85 167.37
421.40
6159.65
6159.65 Cum
20 SWD-145 19676 19676 Each
227 14a 165.00 165.00

283 409.16 409.16
283 b) 40.916 40.92
615.08
30.75
645.83
645.82 Rmt
23 RW-7-09 92 92.00 Per Pass
Per Sqm
51 15 (3) (a) 175.00 175.00

note
17.50
192.50 Cum
Public Works Department
he quarry owner, same
1% 1% Final
labour insuran Rate
cess ce
0.00 2.96 299.06
0.00 1.47 148.47
0.00 1.18 119.83

0.00 0.63 63.63
0.00 1.42 144.22
3.31 3.31 337.72
0.00 0.21 21.21
0.00 14.56 1470.64

0.00 57.40 5798.25
0.00 5.06 511.16
0.00 5.57 563.12
0.00 7.98 805.98
0.00 58.52 5910.52

0.00 102.30 10332.80
0.00 736.66 74403.61
0.00 575.23 58098.43
0.00 88.91 8980.66
0.74 0.74 76.03

0.00 58.92 5950.97
0.00 14.85 1500.55
0.00 20.16 2036.46
0.00 13020.00
0.00 575.23 58098.43
0.57 0.00 57.57

0.56 0.00 56.56
0.65 0.00 65.65
0.63 0.00 63.63
0.00 11.55 1166.55
0.00 12.12 1224.87 110

0.05
118.58 118.58 11976.58
14.57 14.57 1472.07

0.00 61.03 6164.13
0.00 0.21 21.21
0.00 6.44 651.14
0.00 2.48 251.33
0.00 4.18 423.13
0.00 1.47 148.47
0.00 1.70 171.80
11.55 11.55 1166.55 5.5

0.00 1.56 157.90
0.00 1.97 199.19
0.00 2.35 237.99
0.00 2.73 276.11
0.00 3.26 329.74
0.00 4.24 428.58
0.00 4.65 470.12
0.00 711.03 71814.93

3.70 374.15
8.01 809.82
7.02 709.04
5.62 568.29
38.46 3885.07
30.27 3057.47
0.00 2.69 272.54
0.00 4.18 423.13
0.00 5.96 602.36
0.00 7.71 779.46
0.00 1.75 177.10
0.00 2.59 261.94
0.00 4.11 415.71

0.00 0.54 55.39
0.00 0.39 39.40
0.00 63.50 6414.04

0.00 95.93 9689.32
115.5
39.90 39.90 4030.70
31.38 31.38 3169.68
19.93 0.00 2012.93
9.49 0.00 958.49

0.00 53.69 5423.39
0.00 46.83 4729.83
0.00 55.78 5633.90

0.00 35.65 3600.79
0.00 4.51 455.78
0.00 0.60 61.50

0.00 61.59 6221.24
196.76 0.00 19872.76
0.00 6.45 652.27

0.92 0.00 92.92 Check Labour cess&
insurance Conditions in
FMR
1.92 1.92 194.42

Footpath Side Shoulder Pavement Divider Pavement Side Shoulder
LHS
Teen Hat Naka to Hariniwas 2.23 2.3 6.63 0.8 6.6 2.8
Hariniwas to teen petrol pump 2.2 3.8 6.1 0.66 6 2.68
Teen Petrol Pump to Almeda road 1.9 2.75 5.6 0.6 5.5 3.6
Almeda to Khopat 2.1 2.5 6.6 0.6 6.6 2.8
Khopat to Uthalsar Naka 2 3.25 6.75 0.6 6.7 3.3
Uthalsa Naka to Minatai Thakare 2 5.25 6.55 0.8 6.6 2.67
Minatai Thakare to Royal Hotel 2 4.1 5.2 0.8 6.7 3.2
Royal Hotel Golden Dyes 1.75 3.6 6.68 0.6 6.6 2.85
2.02 3.44 6.26 0.68 6.41 2.99

Footpath Total
RHS
2.06 23.42
1.8 23.24
2.52 22.47
2.5 23.7
2.5 25.1
2.4 26.27
2.65 24.65
2.75 24.83
2.40 24.21
NE MUNICIPAL CORPORATION THANE
ABSTRACT
NAME OF WORK : -
Sr.No. Discription Qty Rate Unit
1 Excavation for roadways by manual means such as soft rock 2750.00 299.06 Cum
including dressing section to the required camber and side
slopes and conveying the excavated materials with all lifts
upto a lead of 50 m and spreading for embankment,
disposing as directed etc. complete.
1 (a) Excavation for roadways by Mechanical means such as soft 500.00 148.47 Cum
rock including dressing section to the required camber and
side slopes and conveying the excavated materials with all
lifts upto a lead of 50 m and spreading for embankment,
disposing as directed etc. complete.
2 Excavation for roadways by manual means such as earth 1080.00 119.83 Cum
soil of all sorts sand, gravel or soft murum including dressing
section to the required camber and side slopes and
conveying the excavated materials with all lifts upto a lead of
50 m and spreading for embankment, disposing as directed
etc. complete.
2 (a) Excavation for roadways by Mechanical means such as 7626.25 63.63 Cum
earth soil of all sorts sand, gravel or soft murum including
dressing section to the required camber and side slopes and
conveying the excavated materials with all lifts upto a lead of
50 m and spreading for embankment, disposing as directed
etc. complete.
2 (b) Excavation for roadways by manual means such as hard 50.00 144.22 Cum
murum and boulders including dressing section to the
required camber and side slopes and conveying the
excavated materials with all lifts upto a lead of 50 m and
spreading for embankment, disposing as directed etc.
complete.
3 Excavation for foundation/pipe treches in ash muddy/ 400.00 337.72 Cum

marshy/ slushy/soil incld. Use of poclain, labour for
dewatering during execution incld. Removing the excavated
material upto a distance of 50 m & lifts as below, stacking &
spreading as directed, etc complete.
4 Compacting sub grade / gravel / oversize metal (200mm 19250.00 21.21 SQM
loose) layer 2 to 7 m wide with by Vibratory Roller including
necessary, labour, materials and artificial watering etc.
complete.
5 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone 720.00 1470.64 Cum
soiling 15 cm to 20 cm thick including hand packing and
compacting complete.
6 Providing and casting in situ cement concrete 1:2:4 of trap / 477.00 5798.25 Cum
granite / quartzite / gneiss metal for foundation & bedding
including centering, formwork, compacting, roughening them
if special finish is to be provided and curing and finishing if
required complete, with...........
Spec. No.: Bd.E.2 Page No. 288 and B.7 Page No 70
A) ii) without Formwork Without SCADA with concrete
mixer with hopper
7 Providing and laying concrete pipes of I.S.NP. class of

--------- diameter in proper line, level and slope including
necessary collars, excavation, laying, fixing with collars in
cement mortar 1:1 and refilling the trench complete.
a) 150mm dia. 0.50 511.16 RMT
b) 225mm dia. 200.40 563.12 RMT
c) 300mm dia. 20.00 805.98 RMT
8 Providing and casting in situ cement concrete M-25 specified 1.00 5910.52 Cum
of trap/ granite / quartzite/ gneiss metal for R.C.C. work in
foundation like raft, strip foundations, grillage and footings of
R.C.C. columns and steeel stanchions etc.including bailing
out water, formwork, cover blocks compacting and curing
etc. (Excluding reinforcement and structural steel) complete,
With.....of grade
B(b) Without SCADA with concrete mixer
with hopper
of trap/ granite / quartzite/ gneiss metal for R.C.C. pardi
75mm thick fins including centering, formwork, cover blocks
compacting and roughening them if special finish is to be
provided and curing complete. (Excluding
10 Providing and fixing in position TMT-Fe-500/Fe-415 bar 14.20 74403.61 MT
reinforcement of of TATA TISCON /SAILl /JSW /ESSAR or
equivalent make (condirming to IS code) of various
diameters for R.C.C. pile caps, footings, foundations, slabs,
beams columns, canopies, staircase, newels, chajjas, lintels
pardis, copings, fins, arches etc. as per detailed designs,
drawings and schedules. including cutting, bending, hooking
the bars, binding with wires or tack welding and supporting
as required including cover block etc. complete.
of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and
landings canopy as per detailed designs and drawings
including plywood/steel centering, formwork, cover blocks
compacting and roughening the surface if special finish is to
be provided and curing complete. (Excluding
B) Without SCADA with concrete mixer with hopper
12 Dewatering using 5 to 9 H.P. pumps for all drain C.D. and 400.00 76.03 Hrs
road construction work including diversion of stream,
providing coffer dam bund etc. as directed etc. complete
13 Providing and casting in situ cement concrete of M-20 grade 200.00 6221.24 Cum
of trap / granite /quartzite/ gneiss metal for bed blocks,
foundation blocks andsuch other items including bailing out
water formwork, compacting, roughening, them if special
finish is to be provided and curing and finishing ifrequired
complete, Without SCADA with concrete mixer with hopper
14 Providing and laying wedge shear elemental layer (WSEL) 1150.00 1500.55 Cum
by using rubble stone of size 15 to 20 cm thick in single layer
of 230 mm including packing the same with 20 mm to 40 mm
thick aggregates ( normal size) and using stone powder of
40 mm to 50 mm thick on surface and watering &
compacting by vibratory roller confirming layer thickness of
minimum 200 mm and as directed by Engineer - in - charge
etc complete.
15 Providing, laying, spreading and compacting stone 5775.00 2036.46 Cum
aggregates of specific sizes to water bound macadam for
grading II by manuals means specification including
spreading in uniform thickness, hand packing rolling with 3
wheeled steel/vibratory roller 8-10 tonnes in stages to proper
grade and camber, applying and brooming requisite type of
screening/ binding Materials to fill up the interstices of coarse
aggregate, watering and compacting to the required density
to protect edges, lighting, guarding, barricading and
maintenance of diversion etc. complete.
16 Providing and Laying M60 grade cement concrete of 150.00 13020.00 Cum
approved mix design with avg. Flextural strength of 4.4 MPa
in 3 days from R.M.C. plant incld. use of micro silica/alcofine,
approved make super plastiser and retarder, fibriliated 100 %
virgin polypropylene fibres, fly ash and transported by transit
mixer and placing at work site. Compacting, finishing, initial
curing by approved curing compound/ contractors water and
tarring the sides of slab with hot bitumen as specified and as
directed (w/c ratio 0.28 max.). (vatta for curing will be paid
separately) for Ultra thin White Topping (UTWT) pavement.
etc completed.
17 Providing and fixing in position Mild Steel bar reinforcement 0.45 58098.43 MT
of of TATA TISCON /SAILl /JSW /ESSAR or equivalent
make (condirming to IS code)
foundations, slabs, beams columns, canopies, staircase,
newels, chajjas, lintels pardis, copings, fins, arches etc. as
per detailed designs, drawings and schedules. including
cutting, bending, hooking the bars, binding with wires or tack
welding and supporting as required including cover block etc.
complete.
18 Green Cutting of construction & dummy joints of concrete 12940.00 57.57 Rmt
grade M 40 and above (UTWT) pavement by mechanical
means within 10 to 12 hrs after casting of bay / slab upto 1/3
rd depth of pavement and 5 to 6 mm wide as directed
19 Providing and Placing 5mm thick Thermocole in dummy and 647.00 56.56 Sqm
construction joints immdtly after cutting of joints and
removing the same before dressing of dummy and
construction joint as directed etc. complt.
20 Providing and construction of cement vatta in C.M.1:10 at 1200.00 65.65 Sqm

0.6 M X 0.6 M c/c admeasuring 0.09 meter at bottom, 0.04 m
at top and 0.075 m deep and maintaining the same
throughout 7 days curing period and removing the same
material as directed.
21 Sealing of M-35 & above new C.C. pavement dummy, 12940.00 63.63 Rmt
transverse, longitudinal joints with hot rubberised sealing
compound confirming to IS 1834-1984 after proper cleaning
with compressed air, applying required primer & providing a
layer of lime powder over hot sealing compound as directed.
Sealing 5mm - 6 mm wide & avg. depth of 40 mm transverse
& longitudinal joints
22 Providing and lyaing of hot applied themoplastic compoundn

2.5mm thick Yellow / White including reflectorising glass
beads @250 gms.per sqm area,thickness of 2.5mm is
exclusive of surface applied glass bead as per IRC 35. The
finished surface to be level, uniform and free from streaks
and holes etc.complete with 3 years gruantee Spec. No.:
MORTH CI.803 Page 388/2012
a ) White 815.00 1166.55 Sq.Mt.
b ) Yellow 30.00 1224.87 Sq.Mt.
23 Providing & constructing Brick Masonary Inspection chamber 15.00 11976.58 No

90 x 60 cm internal size & depth upto 1.2M with 15cm thick
1:3:6 proportion PCC bedding, excluding excavation, B.B.
masonry in C.M. 1:5 Proportion,plastering from inside &
outside as required in c.m.1:3 , 1:2:4 cement concrete
haunches at bed, precast S.F.R.C frame & cover,
etc.complete as directed by Engineer in- Charge.
a) Add for every increase in depth of 30cm or part thereof 1.00 1472.07 cm depth
24 Providing and laying in situ cement concrete M20 grade for 513.00 6164.13 Cum
road pavement supplying all materials, providing steel form
work,compaction by plate vibrator, providing joints at
everythirty meters internal and filling the joints
reinforcement) (Newly laid concrete shall be covered
bygunny bag/plastic sheet/tarpaulin etc. for curing
periodcomplete.)
25 Removing cement tiles, or marble or polished shahabad floor 750.00 21.21 Sqm
or dado without bed concrete including stacking the materials
26 Dismantling the R.C.C. work 1:2:4 and sorting out the 575.00 651.14 Cum
materials such as steel etc. as directed and stacking them
within the specified lead as directed.
27 Removing lime or lean cement concrete including stacking 300.00 251.33 Cum
the spoils as directed with all leads, lifts, complete.
28 Dismantling brick masonry in lime or cement mortar and 100.00 148.47 Cum
stacking the materials as directed with all leads, lifts, com-
plete.
29 Dismantling stone masonry in lime or cement including 90.00 171.80 Cum

stacking the materials as directed with all leads, lifts,
complete.
30 Supply of excavator cum loader machine (like JCB machine) 160.00 1166.55 Hrs
etc complete
31 Transportation of excavated material including loading and

unloading etc. complete.
a) Lead upto 1 Km 718.56 157.90 Cum
b) lead up to 3 km 718.56 199.19 Cum
c) lead up to 5 km 718.56 237.99 Cum
d) lead up to 7 km 1437.13 276.11 Cum
e) lead up to 10 km 4311.38 329.74 Cum
f) lead up to 15 km 5029.94 428.58 Cum
g) lead up to 20 km 1437.13 470.12 Cum
32 Providing and fabricating structural steel work in rolled 0.60 71814.93 MT

sections like joists, channels, angles, teesn etc. as per
detailed designs and drawing or as directed by Engineer-in-
charge including cutting, fabrication, hoisting & erecting fixing
in position with connecting plates, braces etc. and one coat
of anticorrosive paint and over it two coat of oil paintings of
approved quality and shade complete.
33 P/F precast M-20 grade concrete water table size 50 cm 2250.00 374.15 Rmt
X30cm X 10cm etc. complete.
34 Providing & fixing kerb stones 30 cm to 40 cm long, 15cm 2250.00 809.82 Rmt
wide, 38cm deep medium dressed in all exposed surfaces,
set in cement mortar 1:2 on a 15cm thick & 25cm wide M-
100 (1:3:6) C. C. bed including filling the joints with 1:2 C. M.
pointing, curing etc. complete.(in M-25 grade)
35 Removing and resetting kerb stones in 1:2 C.M., on new 1000.00 709.04 Rmt
M100 (1:3:6) c.c. bed, 15 cm, thick and 25 cm wide including
filling in the joints with C.M. 1:2 pointing, curing etc. complete
36 Removing & resetting water tables 30 cm wide on a new 1000.00 568.29 Rmt
M100 (1:3:6) cement concrete bed 15 cm. thick including
filling in the joints with C.M. 1:2 and cement pointing, curing
including removing the old cement bed, curing etc. complete
37 Providing and fixing cast in situ parabolic central divider of 50.00 3885.07 Rmt
M-25 grade and applying 2 coats of flat oil paint etc.
complete.
38 Providing , supplying and fixing Precast parabolic central 10.00 3057.47 Rmt
divider of M-25 grade and applying 2 coats of flat oil paint
etc. complete.
39 Providing and laying in trenches ---------- dia........... grade

Galvanised iron pipes having embossed I.S.I. mark on it, of
jindal/Tata/Zenith or equivalant make of .......... kg/metre
necessary fitting remaking good the demolished portion with
filling trenches and with primer of anti-corrosive oil paint , 2
coats complete.
a) 15 mm dia 80.00 272.54 Rmt
b) 25 mm dia 100.00 423.13 Rmt
c) 40 mm dia 80.00 602.36 Rmt
d) 50 mm dia 55.00 779.46 Rmt
40 Providing and laying in trenches …... mm dia. CPVC pipe of

Prince / Sudhakar / Kishan / Supreme or equivalent make
including necessary excavation, fittings. Refilling trenches
etc. complete.
Spec. No.: BD.V 5 page 596 and as directed by Engineer in
charge
a) 15 mm dia 60.00 177.10 Rmt
b) 25 mm dia 50.00 261.94 Rmt

c) 40 mm dia 30.00 415.71 Rmt
41 Providing and laying bituminous tack coat, 75Kg/100 sqmtr 19250.00 55.39 Sqm
over .......... surface by manual/mechanical sprayer including
42 Providing and laying bituminous tack coat, 50Kg/100 sqmtr 19250.00 39.40 Sqm
over B.T. surface by manual/mechanical sprayer including
43 Providing and laying hot mix hot laid dense bituminous 1443.75 6414.04 Cum
macadam 50/75mm compacted thickness with 4.25%
bitumen content by weight of total mix on prepared surface
with specified graded crusher aggregates for the base /
binding course including loading of aggregates with
F.E.loader, heating of stone aggregates and bitumen and
mixing in modern drum mix type of hot mix plant transporting
the hot mix to work site laying the mixed material with sensor
paver finisher to the required grade, level and camber, rolling
by power roller and vibratory roller to achieve the desired
density. (Grade of Bitumen should be CRMB 60)
44 Providing and laying bituminous concrete with 100-120 TPH 770.00 9689.32 Cum
batch type hot mix plant producing an average output of 75
tonnes per hour using crushed aggregates of specified
grading premixed with bituminous binder @ 5.4% to 5.6% of
mix and filler, transporting the hot mix to work site, laying
with a hydrostatic paver finisher with sensor control to the
required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired
compaction etc. complete in all respect.( Using Bitumen
PMB-40 grade)
45 Providing and fixing in position steel fibre reinforced concrete 50.00 4030.70 No
laoding, unloading, transportation, all taxes, etc.completed
as directed by Enginner-in-charge (20 tonnes capacity)
b)560 mm dia.
46 Providing and fixing in position steel fibre reinforced concrete 2166.00 3169.68 No
loading, unloading, transportation, all taxes, etc.completed
as directed by Engineer-in-charge (20 tonnes capacity)
d)90X60 mm
47 Raising or lowering Rectangular manhole cover to the 2.00 2012.93 No
required level upto 30 cm including all material, formwork
etc. with 16 cm tk cement concrete M-15 (1:2:4) c.c. coping
under frame and cover of manhole, incl curing etc. complete
48 Raising or lowering Circular manhole cover to the required 1.00 958.49 No

and as directed
49 Providing & fixing of retro reflectorised 600 X 800mm Facility 1.00 5423.39 No
sign boards made out of retro reflective sheeting of high
intensity prismatic grade confirming to IRC - 67 : 2012 and
Type- IV standards of ASTM D4956-09 specifications, fixed
over 4mm thick ACP sheet supported with back support
frame of 25 x 25 x 3mm mild steel angle has approved,
supported on a mild steel angle iron post 75mm x 75mm x
6mm - 3.5 m height, firmly fixed to the ground by means of
properly designed foundation with M20 grade cement
concrete 45cm x 45cm x 60cm, 60cm below ground level as
per approved drawing. 7 years warranty for Retro Reflective
Sheeting from the original sheeting manufacturer & the
certified copy of three years outdoor exposure report from an
independent test lab for the product offered shall be
submitted by the contractor. (Bottom of board shall be at
least 2.6mtr. above ground level)
50 Providing and Fixing of Retro Reflectorised 900mm 1.00 4729.83 No

Cautionary sign boards made out of retro reflective sheeting
of High Intensity prismatic grade conforming to IRC-67: 2012
& Type IV standards of ASTM D4956-09 specifications, fixed
over 2 mm thick Al / 4mm thick ACP sheet supported with
Back support frame of 25x25x3mm mild steel angle as
approved , supported on a mild steel angle iron post 75 mm
X 75 mm X 6 mm - 3.5 mtr height, firmly fixed to the ground
by means of properly designed foundation with M20
51 Providing second class Burnt Brick masonry with 50.00 5633.90 Cum
conventional/ I.S. type bricks in cement mortar 1:6 in
superstructure including striking joints, racking out joints,
watering and scaffolding Complete.
52 Providing uncoursed rubble masonry of trap/ granite / 30.00 3600.79 Cum

quartzite / gneiss stones in cement mortar 1:6 in foundation
and plinth of inner walls / in plinth of external walls including
bailing out water, striking joints on unexposed faces and
watering complete.
53 Providing sand faced plaster externally in cement mortar 200.00 455.78 Sqm
using approved screened sand, in all positions including
base coat of 15 mm thick in cement mortar 1:4 using
waterproofing compound at 1 kg per cement bag curing the
same for not less than 2 days and keeping the surface of the
base coat rough to receive the sand faced treatment 6 to 8
mm thick in cement mortar 1:4 finishing the surface by taking
out grains and curing for fourteen days scaffolding
etc.complete.
54 Providing and applying 2 coats of flat oil paint of approved 510.00 61.50 Sqm
colour and shade to internal / external plastered surfaces
including scaffolding if necessary, cleaning and preparing the
surface (excluding primer coat) complete.
55 Supply of Labour for various works on site 15.00 423.00 Nos.
SAY RS.
Add for contingencies @2%
Add for work charge establishment @2%
Add forEscalation @6%
1005.00
Amount
822415.00
74235.00
129416.40
485258.29
7211.00
135088.00
408292.50
1058860.80
2765765.25
255.58
112849.25
16119.60
5910.52
10332.80
1056531.26
1257292.40
30412.00
1244248.00
1725632.50
11760556.50
1953000.00
26144.29
744955.80
36594.32
78780.00
823372.20
950738.25
36746.10
179648.70
1472.07
3162198.69
15907.50
374405.50
75399.00
14847.00
15462.00
186648.00
113461.02
143130.46
171010.69
396804.58
1421632.79
2155730.61
675621.21
43088.96
841837.50
1822095.00
709040.00
568290.00
194253.50
30574.70
21803.20
42313.00
48188.80
42870.30
10626.00
13097.00
12471.30
1066257.50
758450.00
9260270.25 433.125
7460776.40 231
201535.00
6865526.88
4025.86
958.49
5423.39
4729.83
281695.00
108023.70
91156.00
31365.00
6345.00
67407445.34
67407500 50555625
1348150
1348150
4044450
74148250
74200000
301.5

Thane Municipal Corporation Thane: Revised Measurement Sheet

Uploaded by

Copyright:

Available Formats

Thane Municipal Corporation Thane: Revised Measurement Sheet

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Thane Municipal Corporation Thane: Revised Measurement Sheet

Uploaded by

Copyright:

Available Formats

THANE MUNICIPAL CORPORATION THANE

REVISED MEASUREMENT SHEET

1 Excavation for Road Ways in Soft Rock

1 (a) Excavation for Road Ways in Soft Rock

2 Excavation for Road ways in soft starta

2 (a) Excavation for Road ways in soft starta

2 (b) Excavation for Road ways in soft starta such as hard

3 Excavation for foundation/pipe treches in ash muddy/

Gutter 2.00 250.00 1.00 0.80 400.00

Road 1 3250.00 5.00 16250.00

6 P/L insitu cement concrete 1:2:4 of trap metal for

7 Providing & fixing in position NP2 pipe with necessary

8 P/L insitu cement concrete M 25 for RCC Raft

Gutter Wall 1.00

9 P/L insitu cement concrete M 25 for RCC Pardi

Gutter Wall 1.00

10 Providing and fixing in position-T.M.T. bar reinforcement

142.00 100 kg/cum 14.2 Mt

11 Providing and casting in situ cement concrete M25 of trap

Gutter 2 250.00 1.4 0.2 140.00

13 Providing and casting in situ cement concrete of M - 20

14 Providing and laying wedge shear elemental layer

Road 2 500 5.00 0.23 1150

15 P/L size metal (grade wise) mm metal for water bound

Road 1 3250 5.00 0.3 4875.00

16 Providing and Laying Ultra thin White Topping (UTWT)

17 Providing and fixing in position mild steel tie bars of

18 Cutting of construction and dummy joints of M40 and

19 Providing and Placing 5mm thick Thermocole in dummy

a ) White 2 50 0.15 15.00 Sq.mt

23 Providing and constructing Brick Masonry Inspection

b) 90x60cm. 15.00 15.00 each

2.00 2850.00 0.60 0.15 513.00

25 Dismantling cement tiles or marble or polished shahabad

2 250.00 1.50 1 750.00 Cum

26 Dismantling reinforced cement concrete work including

Gutter slab 2 250 1.20 0.125 75.00

4 250.00 0.30 1.00 300.00 CUM

28 Dismantling Brick Masonry

29 Dismantling Stone Masonry

30 Supply of excavator cum loader JCB 20 8 160.00 Hrs

31 Transportation of excavated material including 13471.25

33 Providing , supplying and fixing Precast Water table of

34 Providing , supplying and fixing Precast Kerb stone of M-

37 Providing , supplying and fixing Precast Parabolic Central

38 Providing , cast in situ Parabolic Central Divider 1 10 10.00 Rmt

39 Providing and laying in trenches medium grade ISI mark

a) 15 mm dia L/s. 80.00 Rmt

40 Providing and laying in trenches medium grade ISI mark

a) 15 mm dia L/s. 60.00 Rmt

41 P/L Bituminous tack coat of 60/70 grade on W.B.M

42 P/L Bituminous tack coat of 60/70 grade on B.T.

1 3250 5 0.075 1218.75

44 P/L hotmix hotlaid Bituminous Concrete 25/40 mm

1 3250 5 0.04 650.00

45 Providing and fixing in position steel fibre reinforced

46 P/Fprecast SFRC rectangular chamber covers of size…..

47 Raising or lowering Rectangular manhole cover to the

49 Providing and fixing informatory sign boards in square