Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 82 views

    CBR Test Report

    Uploaded by

    Rubaneswary Sridharan
    The document is a CBR test report that includes testing a soil sample to determine its California Bearing Ratio (CBR) value. The CBR value indicates the soil's strength and suitability for use as a pavement foundation. The report outlines the objective, theory, apparatus, procedures, data, discussion, and conclusions of the CBR test conducted on a soil sample. The test procedure involves compacting layers of the soil in a mold and then measuring the penetration force required to push a piston into the sample at increments up to 7mm.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    CBR Test Report

    Uploaded by

    Rubaneswary Sridharan
    82 views8 pages
    The document is a CBR test report that includes testing a soil sample to determine its California Bearing Ratio (CBR) value. The CBR value indicates the soil's strength and suitability for use as a pavement foundation. The report outlines the objective, theory, apparatus, procedures, data, discussion, and conclusions of the CBR test conducted on a soil sample. The test procedure involves compacting layers of the soil in a mold and then measuring the penetration force required to push a piston into the sample at increments up to 7mm.

    Original Description:

    Report

    Original Title

    Cbr Test Report

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document is a CBR test report that includes testing a soil sample to determine its California Bearing Ratio (CBR) value. The CBR value indicates the soil's strength and suitability for use as a pavement foundation. The report outlines the objective, theory, apparatus, procedures, data, discussion, and conclusions of the CBR test conducted on a soil sample. The test procedure involves compacting layers of the soil in a mold and then measuring the penetration force required to push a piston into the sample at increments up to 7mm.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    82 views8 pages

    CBR Test Report

    Uploaded by

    Rubaneswary Sridharan
    The document is a CBR test report that includes testing a soil sample to determine its California Bearing Ratio (CBR) value. The CBR value indicates the soil's strength and suitability for use as a pavement foundation. The report outlines the objective, theory, apparatus, procedures, data, discussion, and conclusions of the CBR test conducted on a soil sample. The test procedure involves compacting layers of the soil in a mold and then measuring the penetration force required to push a piston into the sample at increments up to 7mm.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 8

    GEOTECHNICAL AND HIGWAY

    ENGINEERING LABORATORY
    (DCC30112)
    CBR TEST REPORT

    Lecture Name PN.ROSMAIZUL BINTI MUSTAPHA


    Name RUBANESWARY A/P SRIDHARAN
    Section DKA3A
    Matric Num 01DKA20F2026

    1
    CONTENT
    BIL TITLE PAGE
    1 OBJECTIVE
    2 THEORY
    3 APPARATUS
    4 PROCEDURE
    5 DATA
    6 CONCLUSIONS
    7 DISCUSSION

    Tittle :
    California Bearing Ratio (CBR)

    2
    OBJECTIVE :
    To determine the CBR value for a a soil consideration as a pavement
    foundation.This value is a percentage comparison with the standard
    crushed rock from California

    THEORY :
    It is important to realize that the CBR test is one step in the road
    pavements foundation design process,the test how the road engineer
    to design the capping layer(if needed) and the sub-base layer by
    determining the strength of the underlying soil.Engineer can
    determine if this strength is adequate to handle the desired road design
    or if additional procedure need to be done to increase this strength.

    Apparatus :

    3
    Loading Machine

    Soil Sample

    CBR Mould With Collar

    4
    Surcharge Weight Scales

    Tray

    Steel Ramming Rod

    Measuring Cylinder

    5
    PROCUDURE :

     Soil was crushed by using a hammer,after that,the soil was


    sieved by using 20mm sieve.

     The soil sample was weight

     The soil was mix and divided by 5

     Weight the mold and put and rub the mold with grease

    6
     Place the first portion of soil into the mould and compact it with
    the 65 number of blow by using 4.5 rammer and 50mm
    diameter.

     The process was repeated until 5 layer are done.Remove the


    collar,trim the soil flush with the top of the mould with a scraper
    and weight the mould with soil.

    Procedure using the CBR machine:

    7
     Place the mould with base plate containing the sample with the
    top face of the sample exposed,centrally on the lower platen of
    the testing machine.
     Place the appropriate annular surcharge discs on top of the
    sample.
     Fit into place the cylindrical plunger and force-measuring device
    assembly with the face of the plunger resting on the surface of
    the sample.Make sure that the proving ring dial gauge is
    properly adjusted,that there is no daylight between the bottom of
    the stem and the proving ring anvil.
     Apply a seating force to the plunger.
     Record the reading of the force measuring device as the initial
    zero reading or reset the force measuring to read zero.
     Secure the penetration dial gauge in position.Record its initial
    zero reading or reset it to read zero.Make sure that all
    connections between plunger,crosshead,proving ring and
    penetration dial gauge assembly are tight.
     Start the test so that the plunger penetrates the sample at the
    uniform rate of 1=0.2mm/min,and at the same instant start the
    timer.
     Record reading of the force gauge at intervals of penetration of
    0.25mm to a total penetration not exceeding 7.0mm.

    DATA :
    DICUSSION :
    CONCLUSION :

    You might also like