ARIEL JGC and JGD COMPRESSORS

Frame JGC/2 JGC/4 JGC/6 JGD/2 JGD/4 JGD/6

Number of throws 2 4 6 2 4 6
Rated power, BHP 2070 4140 6210 2070 4140 6210
Rated power, kW 1544 3087 4631 1544 3087 4631
Stroke, inches 6.5 6.5 6.5 5.5 5.5 5.5
Stroke, mm 165 165 165 140 140 140
RPM, maximum 1000 1000 1000 1200 1200 1200
Piston speed, ft/min 1083 1083 1083 1100 1100 1100
Piston speed, m/s 5.5 5.5 5.5 5.59 5.59 5.59
Total rod load, lbs 114000 114000 114000 114000 114000 114000
Total rod load, N 507097 507097 507097 507097 507097 507097
Tension, lbs 57000 57000 57000 57000 57000 57000
Tension, N 253549 253549 253549 253549 253549 253549
Compression, lbs 60000 60000 60000 60000 60000 60000
Compression, N 266893 266893 266893 266893 266893 266893
Average weight with cylinders, lbs 16500 34000 50000 16500 34000 50000
Average weight with cylinders, kg 7484 15422 22680 7484 15422 22680
Maximum length, inches 67 117 159 67 117 159
Maximum length, mm 1702 2972 4039 1702 2972 4039
Nominal width, inches 185 185 185 185 185 185
Nominal width, mm 4521 4521 4521 4521 4521 4521
Crankshaft centerline, from bottom, inches 22 22 22 22 22 22
Crankshaft centerline, from bottom, mm 559 559 559 559 559 559
 FEATURES
The JGC and JGD are large, medium speed, reciprocating, separable compressors. Since their introduction
in 1994, they have proven to be one of the most cost effective methods of compression for pipeline trans-
mission, power generation, refrigeration, processing, and all other applications requiring large horsepower
drivers and compression capacity.
 Serviceability - Entire unit is designed for ease of repair. All components
are readily accessible.
 Standardization - Many components are interchangeable throughout the
various lines.
 Full Pressure Lubrication - A frame-driven lube oil pump provides
pressurized, cooled oil through a full flow oil filter to all moving parts
in the frame. A divider block distribution system supplies metered JGC frame
oil to cylinder bores and rod packing. Stainless steel tubing is used
throughout the cylinder lubrication system.
 Unloading Devices - Manual head-end variable volume clearance pockets,
pneumatic fixed volume clearance pockets and pneumatic suction
valve unloaders are available on a limited optional basis.
JGC/2 crankshaft
 Heavy Duty Crankshaft - Forged steel precision machined with integral
counterweights.
 Rugged Crankcase - Heavily ribbed (with spacer bars for stiffening), high-
strength cast iron base with removable, lightweight aluminum top cover
and removable end covers for ease of access.
 Precision Bearing Shells - Precision-machined, tri-metal main and connecting
rod bearings. Forged steel JGC connecting rod

 Rugged Crossheads and Guides - Cast iron crosshead guides, external

ribbing and removable side covers. One piece, long life crossheads with
direct full pressure lubrication at top and bottom for minimum wear.
Hardened and ground steel crosshead pins.
 Rigid Connecting Rods - Forged steel four bolt, heavy duty “H” section.
 Quiet Auxiliary Drive - Fully enclosed and continuously lubricated chain
drive adjusted by positive positioning eccentric vernier.
 Oil and Dust Seal - Foolproof, non-contacting crankshaft oil seal plus Ductile iron crossheads, babbitted
reliable non-wearing dust seal. shoe surface, full-floating crosshead
pin with “through-bolt” and end caps
 Proven Cylinder Design - Non-cooled compressor cylinders with ample
nozzles and large gas passages. Cylinder bodies are ion-nitride hardened
and drilled for indicator ports.
 High Strength Bolting - Grade 8 bolts or B-7 studs on all pressurized
components. All bolting designed for accessibility.
 Efficient Valving - Ariel uses plate-type valves designed for modern speeds
utilizing non-metallic sealing elements as standard. Selected to adhere to Full array of crossheads and nuts for
established, low valve velocity standards. precise balancing of opposing pistons
 Durable Pistons - Wear-resistant ductile or gray iron with wear bands.
 Stout Piston Rods - Short, stiff, precision-ground alloy steel piston rods
with locking crosshead nut. Rolled threads are 1/4” under rod diameter for
easy installation through packing.
JGC/4 crankshaft
 CYLINDERS A complete list of cylinders is available in the Ariel Compressor Performance Program

BORE BORE MAWP MAWP

Class inches mm psi bar Material
3-7/8C:D-VS 3.500, 3.875 89, 98 6700 462 Forged Steel
3-7/8C:D-TR-VS 3.500, 3.875 89, 98 6700 462 Forged Steel
4-5/8C:D-VS 4.250, 4.375, 4.625 108, 111, 117 6000 414 Forged Steel
4-5/8C:D-TR-VS 4.250, 4.625 108, 117 6700 462 Forged Steel
5-3/8C:D-VS 5.000, 5.375 127, 137 3600 248 Forged Steel
6-1/4C:D 5.875, 6.250 149, 159 2435 168 Ductile Iron
6-1/4C:D-VS 5.875, 6.250 149, 159 3600 248 Forged Steel
7-1/4C:D 6.750, 7.250 171, 184 2415 167 Ductile Iron
7-1/4C:D-VS 6.750, 7.000, 7.250 171, 178, 184 3500 241 Forged Steel
8-3/8C:D 7.875, 8.375 200, 213 2400 165 Ductile Iron
9-5/8C:D 9.125, 9.625 232, 244 1900 131 Ductile Iron
11C:D 10.500, 11.000 267, 279 1270 88 Ductile Iron
12-1/2C:D 12.000, 12.500 305, 318 800 55 Ductile Iron
14-1/8C:D 13.625, 14.125 346, 359 815 56 Ductile Iron
Double-Acting

15-7/8C:D 15.375, 15.875 391, 403 635 44 Ductile Iron

17-7/8C:D 17.375, 17.875 441, 454 445 31 Ductile Iron
20-1/8C:D 19.625, 20.125 498, 511 345 24 Ductile Iron
22C:D 22.000 559 285 20 Ductile Iron
24-1/8C:D 24.125 613 275 19 Ductile Iron
26-1/2C:D 26.500 673 230 16 Ductile Iron
9-1/4CK:DK 8.75, 9.25 222, 235 2400 166 Ductile Iron
9-3/4CM:DM:CL:DL 8.75, 9.25, 9.75 222, 235, 248 1700 117 Ductile Iron
10-3/8CM:DM:CL:DL 9.875, 10.375 251, 264 1900 131 Ductile Iron
11CM:DM:CL:DL 10.250, 10.750, 11.000 260, 273, 279 1700 117 Ductile Iron
11-3/8CM:DM:CL:DL 10.875, 11.375 276, 289 1690 117 Ductile Iron
12-3/8CM:DM:CL:DL 11.250, 11.750, 12.375 286, 298, 314 1690 117 Ductile Iron
12-1/2CM:DM:CL:DL 12.000, 12.250, 12.500 305, 311, 318 1350 93 Ductile Iron
13-5/8CM:DM:CL:DL 13.125, 13.625 333, 346 1085 75 Ductile Iron
14-3/4CM:DM:CL:DL 14.250, 14.750 362, 375 600 41 Ductile Iron
13CN 13.000 330 1350 93 Ductile Iron

2-5/8C:D-FS-HE 2.500, 2.625 64, 67 7800 538 Forged Steel

Tandem*

3C:D-FS-HE 3.000 76 6500 448 Forged Steel

5-3/8C:D-VS-CE 5.000, 5.375 127, 137 3600 248 Forged Steel
5-3/8C:FS-HE 5.000, 5.375 127, 137 2500 172 Forged Steel
9-5/8C:D-CE 9.125, 9.625 232, 244 1390 96 Ductile Iron

* HE=Head End, CE=Crank End

More than 35 years ago, Ariel introduced an innovative cylinder design

that eliminated water cooling from the cylinder jacket. This proven
design yields significant advantages over water-cooled cylinders:
 higher efficiency
 larger gas passages
 reduced pressure-drop losses
 lower maintenance (no scaling or corrosion)
Ariel is the only manufacturer to use an ion-nitride furnace to increase
surface hardness of all cylinders. This extra step reduces cylinder bore
wear to an absolute minimum. To ensure complete reliability in the
field, Ariel pressure-tests each cylinder to 150% of maximum allow-
able working pressure (MAWP) during manufacture.
Ariel JGC-CL cylinders specifically designed for
pipeline transmission
 THE ARIEL NETWORK
Ariel’s success is based on strong relationships built
on mutual respect and trust. Employees, vendors,
distributors, and end users are all part of the Ariel
Network.
Ariel Compressors are marketed and packaged through
a long-established network of elite compression
system engineering companies. Ariel’s Authorized
Distributors integrate the compressor with a structural
skid, a prime mover, piping, pulsation control, cooling
systems, process valving, and control systems.

 All Ariel distributors adhere to Ariel’s strict packaging

standards.

 Ariel’s large network offers the most complete

service and parts coverage available in the world.
Model JGC/4 package ready for delivery

CUSTOMER SERVICE
We are committed to supporting our compressors for
life. If there is a problem with an Ariel compressor,
we’ll help you solve it—now. ARIEL CORPORATION
 The Ariel Network is composed of more than 1000 WORLD HEADQUARTERS
35 Blackjack Road
Ariel-trained field servicemen and technicians,
Mount Vernon, Ohio 43050 USA
worldwide.
Telephone: 740-397-0311
 Ariel’s policy has always been to routinely ship stan- Fax: 740-397-3856
dard parts within 24 hours of receiving an order.
24-HOUR SUPPORT
 Ariel gas compressors are backed by more than North America: 888-397-7766
100 parts and service outlets close to every major Worldwide: +1 740 397 3602
natural gas field.
 Ariel’s Service and Technical Schools are held fre- REGIONAL SALES and SUPPORT
quently, free of charge, for engineers and field Denver, Colorado, • Fort Worth, Texas
servicemen. These courses are taught by Ariel Houston, Texas • Sydney, Australia
engineers and technicians directly involved in the Calgary, AB, Canada • The Netherlands
subject material. Moscow, Russia • Singapore
Bangkok, Thailand
 The availability of Ariel manufactured parts at
competitive prices will ensure your Ariel compres-
sor’s maximum reliability and productivity.
 Ariel’s goal is to offer the best customer care and
service. Our warranty and our treatment of warranty
issues clearly show our commitment to this goal.
www.arielcorp.com

2/10 World Standard Gas Compressors