FSV01

Overview .........................................
10
Bolted Bonnet Gate- 800 lb. &
1500 lb. valves................................ 11
Bolted Bonnet Gate- 1500 lb. &
2500 lb. valves................................ 12
Welded Bonnet Gate- 800 lb. &
1500 lb. valves................................ 13
Welded Bonnet Gate- 2500 lb. &
4500 lb. valves................................ 14
G ATE V ALVES
OVERVIEW
GATE VALVES
Forged steel, outside screw
and yoke (OS&Y), rising
stem, non-rising handwheel.
Full or conventional port.
Bolted or welded bonnet
joint. Integral backseat.
12
11
9
10
4
7
6
8. STEM. The stem is forged steel and part of the valve trim. It contains
an integral back seat shoulder, which mates with the integral backseat
of the bonnet. The stem is designed to the basic dimensional
requirements of the applicable specifications such as API 602.
9. GLAND AND FLANGE. The gland, gland flange assembly utilizes a
separate, two piece design. This self aligning design allows the
flange to be unevenly tightened while the gland maintains its parallel
alignment with the stem and stuffing box.
10. GLAND BOLTS AND NUTS. The steel/stainless steel gland bolt and
nut assembly is a stud, double nut arrangement. This design allows
complete removal from the valve when service is required. The use of
industry standard thread full length studs and nuts also allows easy
replacement should these items be lost or in need of replacement.
11. YOKE SLEEVE. The yoke sleeve is of forged stainless steel material
having a high melting point and is resistant to wear and corrosion.
12. HANDWHEEL. The handwheel is forged carbon steel of an open
spoke design. This robust construction along with appropriate sizing
allows for ease of operation.
1. BODY. The body is forged steel and designed to the basic

dimensional requirements of the applicable specifications such as API
602 and ASME B16.34. The body is available in both the full or
conventional port design.
2. BONNET. The bonnet is forged steel, has an integral backseat and
incorporates the stuffing box, which has dimensions per the applicable
specifications such as API 602.
3. BODY-BONNET JOINT. Two different bonnet joint designs are available.
These are either the bolted bonnet or the threaded and seal welded type.
4. GASKET. The bolted bonnet joint design valve uses a contained,
controlled compression, spiral wound type gasket.
5. BONNET BOLTING. The bonnet bolting is manufactured of alloy steel in
accordance with the requirements of the applicable specifications such
as API 602 and ASME B16.34.
6. SEAT RINGS. The seat rings are steel and makeup part of the valve trim.
They are pressed into the valve body and wedged into place, forming a
seal with the body. The seating surfaces are ground and lapped.
7. WEDGE. The wedge, which is solid design, is forged or
investment cast steel and is part of the valve trim. The seating surfaces
are ground and lapped.
10
GATE VALVES- BOLTED BONNET- FULL & REDUCED PORT

800 LB.
1500 LB.
Design construction:
API 602 - ASME B16.34 - BS 5352
Testing according to API 598
Marking MSS SP25
Outside Screw and Yoke (OS&Y)
Self aligning two piece packing gland
Spiral-wound gasket
Integral backseat
Socket Weld Ends to ASME B16.11
Screwed Ends (NPT) to ASME B1.20.1
Butt Welding Ends to ASME B16.25
Ratings:
- carbon steel class 800 1975 psig @ 100F
138 bar + 38C
255 bar + 38C
FULL PORT FIG. H 10

inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
800 LB.
B open
C
F
G
Weight
PACKING
GASKET
1/4
6
3.15
80
5.98
152
3.46
88
.31
8
1.26
32
4.5
2,1
BH2
G2
3/8
10
3.15
80
5.98
152
3.46
88
.38
9,6
1.26
32
4.5
2,1
BH2
G2
1/2
15
3.54
90
6.22
158
3.46
88
.55
14
1.50
38
5
2,3
BH2
G2
3/4
20
4.33
110
7.72
196
3.82
97
.71
18
1.89
48
8.25
3,7
BH4
G3
1
25
5
127
8.86
225
5.43
138
.94
24
2.20
56
13
5,9
BH5
G4
1 1/4 1 1/2
2
32
40
50
5
5.28
6
127
134
152
10.04 11.42 14.09
255
290
358
5.43 5.43 6.77
138
138
172
1.18 1.48 1.83
30
36,5 46,5
2.52 3.07 3.35
64
78
85
16.25 18.3 27.5
7,4
8,3
12,5
BH6
BY5
BH8
G6
G11
G10
SIZE
1500 LB.
A
B open
C
F
G
Weight
PACKING
GASKET
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
B open
C
F
Weight
PACKING
GASKET
1/2
15
3.15
80
5.98
152
3.46
88
.38
9,6
1.26
32
4.25
1,9
BH2
G2
3/4
20
3.54
90
6.22
158
3.46
88
.55
14
1.5
38
5
2,3
BH2
G2
1
25
4.33
110
7.72
196
3.82
97
.71
18
1.89
48
7.75
3,6
BH4
G3
1 1/2
2
40
50
5
5.28
127
134
10.04 11.42
255
290
5.43 5.43
138
138
1.18 1.48
30
36,5
2.52 3.07
64
78
16
16.75
7,3
7.6
BH6
BY5
G6
G11
3/4
20
4.33
110
7.48
190
3.82
97
.55
14
1.89
48
8.5
3,9
BH5
G2
1
1 1/2
2
25
40
50
5
5
8.27
127
127
210
8.66 11.10 13.58
220
282
345
5.43 5.43 5.43
138
138
138
.71
1.18 1.48
18
30
36,5
2.20 3.07 3.35
56
78
85
13.25 23.75 45.25
6,1
10,8 20,5
BH6
2B5
BH8
G3
G5
G7
REDUCED PORT FIG. 9HL 10

1/4
6
3.54
90
6.02
153
3.46
88
.31
8
1.50
38
5.25
2,4
BH3
G1
3/8
10
3.54
90
6.02
153
3.46
88
.38
9,6
1.50
38
5.25
2,4
BH3
G1
Materials and trim specifications Page 91
1/2
15
4.33
110
7.48
190
3.82
97
.55
14
1.89
48
9
4,1
BH5
G2
3/4
20
5
127
8.66
220
5.43
138
.71
18
2.20
56
13.75
6,2
BH6
G3
1
25
5
127
9.84
250
5.43
138
.94
24
2.52
64
17.5
8
2B4
G4
1 1/4 1 1/2
2
32
40
50
5
5
8.27
127
127
210
11.10 11.42 13.58
282
290
345
5.43 5.43 6.77
138
138
172
1.18 1.48 1.89
30
36,5
48
3.07 3.07 3.35
78
78
85
23
24.25
44
10,5
11
20
BY7
2B5
9B8
G5
G7
G8
11
SIZE
inch
mm
1500 LB.
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
FULL PORT FIG. 9H 10

SIZE
inch
mm
800 LB.
SIZE
REDUCED PORT FIG. HL 10
B open
C
F
G
Weight
PACKING
GASKET
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/2
15
3.54
90
5.98
152
3.46
88
.38
9,6
1.5
38
5.25
2,4
BH3
G1
GATE VALVES- BOLTED BONNET- FULL PORT

1500 LB.
2500 LB.
ASME B16.34 - BS 5352
Integral backseat
Oval ring joint gasket
Ratings standard class:
255 bar + 38C
425 bar + 38C
FULL PORT FIG. H9R 10

SIZE
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1500 LB.
A
B open
C
F
G
Weight
PACKING
GASKET
1/2
15
4.33
110
9.17
233
5.43
138
.55
14
1.5
38
11
5
2B3
R12
3/4
20
5.91
150
11.38
289
5.43
138
.71
18
2.17
55
20.25
9,2
2B4
R17
1
25
5.91
150
11.54
293
5.43
138
.94
24
2.17
55
20.25
9,2
2B4
R17
1 1/4
32
8.27
210
14.06
357
6.77
172
1.16
29,5
2.95
75
44
20
2B5
R20
1 1/2
40
8.27
210
14.41
366
6.77
172
1.44
36,6
2.95
75
44
20
2B5
R20
2
50
9.06
230
17.76
451
9.21
234
1.89
48
3.62
92
79.25
36
9B8
R24
FULL PORT FIG. 25HR 10

SIZE
inch
mm
2500 LB.
A
B open
C
F
G
Weight
PACKING
GASKET
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/2
15
5.91
150
11.10
282
5.43
138
.45
11,5
2.17
55
22
10
2B4
R16
3/4
20
5.91
150
11.3
287
5.43
138
.59
15
2.17
55
22
10
BH8
R16
12
1
25
8.27
210
13.70
348
6.77
172
.77
19,5
2.95
75
48.5
22
BH8
R17
1 1/2
40
9.06
230
15.98
406
9.21
234
1.10
28
3.62
92
81.5
37
9B8
R20
2
50
9.06
230
17.20
437
9.21
234
1.38
35
3.62
92
79.25
36
25B8
R22
GATE VALVES- WELDED BONNET- FULL & REDUCED PORT

800 LB.
1500 LB.
API 602 - ASME B16.34 - BS 5352
Marking MSS SP25
Integral backseat
Body Bonnet Weld to ASME IX
Ratings:
138 bar + 38C
255 bar + 38C
SEAL WELD
FULL PORT FIG. W 10

inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
800 LB.
A
B open
C
F
G
Weight
PACKING
1/4
6
3.15
80
5.98
152
3.46
88
.31
8
1.26
32
3.25
1,5
BH2
3/8
10
3.15
80
5.98
152
3.46
88
.38
9,6
1.26
32
3.25
1,5
BH2
1/2
15
3.54
90
6.22
158
3.46
88
.55
14
1.5
38
4.25
2
BH2
3/4
20
4.33
110
7.72
196
3.82
97
.71
18
1.89
48
7.75
3,5
BH4
1
25
5
127
8.86
225
5.43
138
.94
24
2.20
56
11
5
BH5
1 1/4 1 1/2
2
32
40
50
5
5
8.27
127
127
210
10.04 11.42 14.09
255
290
358
5.43 5.43 6.77
138
138
172
1.18 1.44 1.89
30
36,6
48
2.52 3.07 3.35
64
78
85
14.25 20.75 35.25
6,5
9,5
16
BH6
BY5
BH8
3/8
10
3.54
90
6.02
153
3.46
88
.38
9,6
1.5
38
4.25
2,0
BH3
1/2
15
4.33
110
7.48
190
3.82
97
.55
14
1.89
48
7.5
3,4
BH5
3/4
1
1 1/4 1 1/2
2
20
25
32
40
50
5
5
5
5
8.27
127
127
127
127
210
8.66 9.84 11.10 11.42 13.58
220
250
282
290
345
5.43 5.43 5.43 5.43 6.77
138
138
138
138
172
.71
.94
1.18 1.44 1.89
18
24
30
36,6
48
2.20 2.52 3.07 3.07 3.35
56
64
78
78
85
11.25 15.25
22
23
41.75
5,1
7
10
10,5
19
BH6
2B4
BY7
2B5
2B8
SIZE
1500 LB.
A
B open
C
F
G
Weight
PACKING
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
B open
C
G
Weight
PACKING
1/2
15
3.15
80
5.98
152
3.46
88
.38
9,6
1.26
32
3.5
1,6
BH2
3/4
20
3.54
90
6.22
158
3.46
88
.55
14
1.5
38
3.75
1,8
BH2
1
25
4.33
110
7.72
196
3.82
97
.71
18
1.89
48
6.25
2,9
BH4
1 1/2
2
40
50
5
5
127
127
10.04 11.42
255
290
5.43 5.43
138
138
1.18 1.44
30
36,6
2.52 3.07
64
78
13.25
18
6,1
8,2
BH6
BY5
3/4
20
4.33
110
7.48
190
3.82
97
.55
14
1.89
48
7.25
3,3
BH5
1
25
5
127
8.66
220
5.43
138
.71
18
2.20
56
11.5
5,3
BH6
1 1/2
2
40
50
5
8.27
127
210
11.10 13.58
282
345
5.43 5.43
138
138
1.18 1.44
30
36,6
3.07 3.35
78
85
21.5 40.25
9,8
18,3
2B5
BH8
REDUCED PORT FIG. 9WL 10
13
SIZE
inch
mm
1500 LB.
SIZE
1/4
6
3.54
90
6.02
153
3.46
88
.31
8
1.5
38
4.25
2,0
BH3
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
FULL PORT FIG. 9W 10

inch
mm
inch
mm
800 LB.
SIZE
REDUCED PORT FIG. WL 10
B open
C
F
G
Weight
PACKING
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/2
15
3.54
90
6.02
153
3.46
88
.38
9,6
1.5
38
4.25
2
BH3
GATE VALVES- WELDED BONNET- FULL PORT

2500 LB.
4500 LB.
ASME B16.34
Integral backseat
Body Bonnet Weld to ASME IX
425 bar + 38C
765 bar + 38C

SIZE
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
2500 LB.
A
B open
C
F
G
Weight
PACKING
1/4
6
4.33
110
7.20
183
3.82
97
.31
8
1.89
48
11.25
5,2
2B4
3/8
10
4.33
110
7.20
183
3.82
97
.31
8
1.89
48
11.5
5,3
2B4
1/2
3/4
1
1 1/4 1 1/2
2
15
20
25
32
40
50
5
5
5
5
8.27 9.06
127
127
127
127
210
230
8.43 9.61 10.87 10.87 13.27 15.91
214
244
276
276
337
404
5.43 5.43 5.43 5.43 6.77 9.21
138
138
138
138
172
234
.45
.59
.77
.98
1.10 1.38
11,5
15
19,5
25
28
35
2.20 2.52 3.07 3.07 3.35 3.74
56
64
78
78
85
95
11.75 15.75 21.5 21.5
43
63.75
5,4
7,2
9,8
9,8
19,5
29
2B4
BH8 BH8
2B5
2B5
2B8

SIZE
inch
mm
4500 LB.
A
B open
C
F
G
Weight
PACKING
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/2
15
5
127
10.39
264
5.43
138
.30
7,5
3.07
78
22
10
2B3
3/4
20
5
127
10.83
275
6.61
168
.45
11,5
3.07
78
26.5
12
BH6
Available with Socket Weld or Butt-Weld Ends Only.

14
1
25
9.06
230
14.37
365
9.21
234
.59
15
3.74
95
40.8
18,5
BY7
1 1/2
40
9.06
230
15.75
400
12.60
320
1.02
26
3.74
95
59.5
27
2B8
2
50
17.76
451
17.56
446
12.60
320
1.02
26
4.72
120
81.5
37
4B8
Overview ......................................... 16
Bolted Bonnet- 800 lb. &
1500 lb. valves................................ 17
2500 lb. valves................................ 18
Welded Bonnet- 800 lb. &
1500 lb. valves................................ 19
4500 lb. valves................................ 20
Welded Bonnet (Y type)- 800 lb. &
1690 lb. valves................................ 21
4500 lb. valves................................ 22
G LOBE V ALVES
15
OVERVIEW
GLOBE VALVES
Forged steel, outside screw
and yoke (OS&Y), rotating
rising stem, rising handwheel.
Full or conventional port.
Bolted or welded bonnet joint.
T-Pattern or Y-Pattern. Integral
backseat. Integral body seat.
12
11
9
10
4
7
6
1. BODY. The body is forged steel and designed to the basic dimensional
requirements of the applicable specifications such as API 602 and ASME
B16.34. The body is available in both the full or conventional port
design. It is also available in either T-pattern or Y-pattern configuration.
2. BONNET. The bonnet is forged steel, has an integral backseat and
incorporates the stuffing box, which has dimensions per the applicable
specifications such as API 602.
3. BODY-BONNET JOINT. Two different bonnet joint designs are available.
These are either the bolted bonnet or the threaded and seal welded type.
4. GASKET. The bolted bonnet joint design valve uses a contained,
5. BONNET BOLTING. The bonnet bolting is manufactured of alloy steel in
accordance with the requirements of the applicable specifications such
as API 602 and ASME B16.34.
6. SEAT. The body seat is an integral weld overlay and is part
of the valve trim.
7. DISC. The disc is forged steel and is part of the valve trim. The disc
seating surface is of the tapered or plug type design. The disc is attached
to the stem using a loose or swivel disc arrangement.
16
8. STEM. The stem is forged steel and part of the valve trim. It contains
an integral back seat shoulder, which mates with the integral backseat
of the bonnet. The stem is designed to the basic dimensional
requirements of the applicable specifications such as API 602.
9. GLAND AND FLANGE. The gland, gland flange assembly utilizes a
separate, two piece design. This self aligning design allows the
flange to be unevenly tightened while the gland maintains its parallel
alignment with the stem and stuffing box.
10. GLAND BOLTS AND NUTS. The steel/stainless steel gland bolt and
nut assembly is a stud, double nut arrangement. This design allows
complete removal from the valve when service is required. The use of
industry standard thread full length studs and nuts also allows easy
replacement should these items be lost or in need of replacement.
11. YOKE SLEEVE. The yoke sleeve is of forged stainless steel material
having a high melting point and is resistant to wear and corrosion.
12. HANDWHEEL. The handwheel is forged carbon steel of an open
spoke design. This robust construction along with appropriate sizing
allows for ease of operation.
GLOBE VALVES- BOLTED BONNET- FULL & REDUCED PORT

800 LB.
1500 LB.
ASME B16.34 - BS 5352
Marking MSS SP25
Spiral-wound gasket
Integral backseat
Loose solid disc
Ratings:
138 bar + 38C
255 bar + 38C
FULL PORT FIG. H 30

inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
800 LB.
B open
C
F
G
Weight
PACKING
GASKET
1/4
6
3.15
80
6.54
166
3.46
88
.28
7
1.26
32
4.75
2,2
BH3
G2
3/8
10
3.15
80
6.54
166
3.46
88
.35
9
1.26
32
4.75
2,2
BH3
G2
1/2
15
3.54
90
6.73
171
3.46
88
.51
13
1.5
38
5.25
2,4
BH3
G2
3/4
20
4.33
110
8.39
213
3.82
97
.69
17,5
1.89
48
8.25
3,8
BH5
G3
1
1 1/4 1 1/2
2
25
32
40
50
5
6
7.09 8.27
127
150
180
210
9.72 10.16 11.81 14.76
247
258
300
375
5.43 5.43 6.77 6.77
138
138
172
172
.89
1.16 1.38 1.79
22,5 29,5
35
45,5
2.20 2.52 3.07 3.35
56
64
78
85
13.25 16.75 27.5 43.25
6,1
7,6
12,5 19,6
BY5
BY5
BY7
BH8
G4
G6
G7
G9
SIZE
1500 LB.
A
B open
C
F
G
Weight
PACKING
GASKET
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
B open
C
F
Weight
PACKING
GASKET
1/2
15
3.15
80
6.54
166
3.46
88
.35
9
1.26
32
4.5
2,1
BH3
G2
3/4
20
3.54
90
6.73
171
3.46
88
.51
13
1.5
38
5
2,3
BH3
G2
1
25
4.33
110
8.39
213
3.82
97
.69
17,5
1.89
48
8
3,7
BH5
G3
1 1/2
2
40
50
6
7.09
150
180
10.16 11.81
258
300
5.43 6.77
138
172
1.16 1.38
29,5
35
2.52 3.07
64
78
16.25 26.25
7,4
11,9
BY5
BY7
G6
G7
3/4
20
4.33
110
8.27
210
3.82
97
.47
12
1.89
48
8.75
4
BH5
G2
1
1 1/2
2
25
40
50
5
7.09 8.27
127
180
210
9.84 11.81 14.76
250
300
375
5.43 6.77 6.77
138
172
172
.59
1.06 1.26
15
27
32
2.20 3.07 3.35
56
78
85
14.25 28.5 48.5
6,5
13
22
2B4
2B5
BH8
G3
G5
G7
REDUCED PORT FIG. 9HL 30

1/4
6
3.54
90
6.54
166
3.46
88
.28
7
1.5
38
5.75
2,6
BH3
G1
3/8
10
3.54
90
6.54
166
3.46
88
.35
9
1.5
38
5.75
2,6
BH3
G1
1/2
15
4.33
110
8.27
210
3.82
97
.47
12
1.89
48
9.25
4,2
BH5
G2
3/4
1
1 1/4 1 1/2
2
20
25
32
40
50
5
6
7.09 8.27 9.06
127
150
180
210
230
9.72 10.08 11.81 14.76 16.85
247
256
300
375
428
5.43 5.43 6.77 6.77 9.21
138
138
172
172
234
.59
.79
1.06 1.26 1.57
15
20
27
32
40
2.20 2.52 3.07 3.35 3.74
56
64
78
85
95
14.25 18.75 27.5
49
79.25
6,5
8,5
12,5 22,3
36
2B4
2B4
2B5
BH8
9B8
G3
G4
G5
G7
G8
17
SIZE
inch
mm
1500 LB.
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
FULL PORT FIG. 9H 30

SIZE
inch
mm
800 LB.
SIZE
REDUCED PORT FIG. HL 30
B open
C
F
G
Weight
PACKING
GASKET
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/2
15
3.54
90
6.54
166
3.46
88
.35
9
1.5
38
5.25
2,4
BH3
G1
GLOBE VALVES- BOLTED BONNET- FULL PORT

1500 LB.
2500 LB.
ASME B16.34 - BS 5352
Marking MSS SP55
Integral backseat
Loose solid disc
255 bar + 38C
425 bar + 38C
FULL PORT FIG. H9R 30

SIZE
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1500 LB.
A
B open
C
F
G
Weight
PACKING
GASKET
1/2
15
4.33
110
9.53
242
5.43
138
.47
12
1.5
38
11
5
2B3
R12
3/4
20
5.91
150
12.20
310
5.43
138
.59
15
2.17
55
22
10
2B4
R17
1
25
5.91
150
12.20
310
5.43
138
.75
19
2.17
55
22
10
2B4
R17
1 1/2
40
8.27
210
14.57
370
6.77
172
1.26
32
2.95
75
46.25
21
2B5
R20
2
50
9.06
230
18.31
465
9.21
234
1.57
40
3.74
95
79.25
36
2B8
R24
1/2
15
5.91
150
11.97
304
5.43
138
.43
11
2.17
55
22
10
2B4
R16
3/4
20
5.91
150
11.97
304
5.43
138
.57
14,5
2.17
55
22
10
2B4
R16
1
25
8.27
210
14.25
362
5.43
138
.75
19
2.95
75
48.5
22
BH8
R17
1 1/2
40
9.06
230
17.17
436
9.21
234
1.10
28
3.74
95
83.75
38
2B8
R20
2
50
9.06
230
17.17
436
9.21
234
1.5
38
3.74
95
83.75
38
4B8
R20
FULL PORT FIG. 25HR 30

SIZE
inch
mm
2500 LB.
A
B open
C
F
G
Weight
PACKING
GASKET
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
18
GLOBE VALVES- WELDED BONNET- FULL & REDUCED PORT

800 LB.
1500 LB.
ASME B16.34 - BS 5352
Marking MSS SP25
Integral backseat
Body bonnet weld to ASME IX
Loose solid disc
Ratings:
138 bar + 38C
255 bar + 38C
FULL PORT FIG. W 30

inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
800 LB.
A
B open
C
F
G
Weight
PACKING
1/4
6
3.15
80
6.54
166
3.46
88
.28
7
1.26
32
3.75
1,7
BH3
3/8
10
3.15
80
6.54
166
3.46
88
.35
9
1.26
32
3.75
1,8
BH3
1/2
15
3.54
90
6.73
171
3.46
88
.51
13
1.5
38
4.25
2
BH3
3/4
20
4.33
110
8.39
213
3.82
97
.69
17,5
1.89
48
6.5
3
BH5
1
25
5
127
9.72
247
5.43
138
.89
22,5
2.20
56
11
5
BY5
1 1/4 1 1/2
2
32
40
50
5.91 7.09 8.27
150
180
210
10.12 11.81 14.76
258
300
375
5.43 6.77 6.77
138
172
172
1.16 1.38 1.77
29,5
35
45
2.52 3.07 3.35
64
78
85
14.75 24.25 36.25
6,8
11
16,5
BY5
BY7
BH8
SIZE
1500 LB.
A
B open
C
F
G
Weight
PACKING
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/4
6
3.54
90
6.54
166
3.46
88
.28
7
1.5
38
4.75
2,2
BH3
B open
C
G
Weight
PACKING
1/2
15
3.15
80
6.54
166
3.46
88
.35
9
1.26
32
3.75
1,7
BH3
3/4
20
3.54
90
6.73
171
3.46
88
.51
13
1.5
38
4.25
2
BH3
1
25
4.33
110
8.39
213
3.82
97
.69
17,5
1.89
48
6.5
3
BH5
1 1/2
2
40
50
5.91 7.09
150
180
10.12 11.81
258
300
5.43 6.77
138
172
1.16 1.38
29,5
35
2.52 3.07
64
78
14.5 22.75
6,6
10,4
BY5
BY7
3/4
20
4.33
110
8.27
210
3.82
97
.47
12
1.89
48
7.75
3,5
BH5
1
25
5
127
9.72
247
5.43
138
.59
15
2.20
56
12
5,5
2B4
1 1/2
2
40
50
7.09 8.27
180
210
11.81 14.76
300
375
6.77 6.77
172
172
1.06 1.26
27
32
3.07 3.35
78
85
26.25 41.75
12
19
2B5
BH8
REDUCED PORT FIG. 9WL 30

3/8
10
3.54
90
6.54
166
3.46
88
.35
9
1.5
38
4.75
2,2
BH3
1/2
15
4.33
110
8.27
210
3.82
97
.47
12
1.89
48
7.75
3,5
BH5
3/4
20
5
127
9.72
247
5.43
138
.59
15
2.20
56
12
5,5
2B4
1
1 1/4 1 1/2
2
25
32
40
50
5.91 7.09 8.27 9.06
150
180
210
230
10.08 11.81 14.76 16.85
256
300
375
428
5.43 6.77 6.77 9.21
138
172
172
234
.79
1.06 1.26 1.57
20
27
32
40
2.52 3.07 3.35 3.74
64
78
85
95
16.75
22
44
66
7,6
10
20
30
2B4
2B5
BH8
2B8
19
SIZE
inch
mm
1500 LB.
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg

SIZE
inch
mm
800 LB.
SIZE
REDUCED PORT FIG. WL 30
B open
C
F
G
Weight
PACKING
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/2
15
3.54
90
6.54
166
3.46
88
.35
9
1.5
38
4.25
2
BH3
GLOBE VALVES- WELDED BONNET- FULL PORT

2500 LTD.
4500 LTD.
ASME B16.34 Limited Class
Marking MSS SP25
Integral backseat
Loose solid disc
431 bar + 38C
776 bar + 38C
SEAL WELD

SIZE
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
2500 LTD.
A
B open
C
F
G
Weight
PACKING
1/4
6
4.33
110
7.48
190
3.46
88
.28
7
1.89
48
9.75
4,5
BH4
3/8
10
4.33
110
7.48
190
3.46
88
.35
9
1.89
48
10.25
4,7
BH4
1/2
15
5
127
8.9
226
5.43
138
.43
11
2.20
56
12
5,5
2B3
3/4
20
5.91
150
9.72
247
5.43
138
.57
14,5
2.52
64
17.5
8
2B4
1
1 1/4 1 1/2
2
25
32
40
50
7.09 7.09 8.27 9.06
180
180
210
230
11.34 11.34 14.17 16.54
288
288
360
420
5.43 5.43 6.77 9.21
138
138
172
234
.75
.87
1.10 1.38
19
22
28
35
3.07 3.07 3.35 3.74
78
78
85
95
28.5 28.5 43.5
66
13
13
19,8
30
2B5
2B5
2B5
2B8

SIZE
inch
mm
4500 LTD.
A
B open
C
F
G
Weight
PACKING
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/4
6
5
127
9.06
230
5.43
138
.28
7
2.20
56
14.25
6,5
2B3
3/8
10
5
127
9.06
230
5.43
138
.28
7
2.20
56
14.25
6,5
2B3
1/2
15
5
127
9.25
235
5.43
138
.31
8
2.20
56
14.25
6,5
2B3
Available with Socket Weld or Butt-Weld Ends only.

20
3/4
1
20
25
7.09 7.09
180
180
11.81 11.81
300
300
6.77 6.77
172
172
.43
.55
11
14
3.07 3.07
78
78
33
33
15
15
4B5
4B5
1 1/2
40
9.06
230
14.57
370
9.21
234
.98
25
3.74
95
55
25
2B8
2
50
9.06
230
15.75
400
15.75
400
1.26
32
4.72
120
66
30
4B8
GLOBE VALVES- WELDED BONNET- FULL PORT (Y TYPE)

800 LTD.
1690 LTD.
Marking MSS SP25
Integral backseat
Loose solid disc
Ratings:
- carbon steel class 800
2000 psig @ 100F
138 bar + 38C
291 bar + 38C
SEAL WELD
FULL PORT FIG. Y 30

SIZE
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
800 LTD.
A
B open
C
F
G
Weight
PACKING
1/4
6
3.35
85
6.85
174
3.46
88
.28
7
1.5
38
4.25
2
BH3
3/8
10
3.35
85
6.85
174
3.46
88
.35
9
1.5
38
4.25
2
BH3
1/2
15
3.35
85
6.85
174
3.46
88
.51
13
1.5
38
4.25
2
BH3
3/4
20
4.13
105
8.46
215
3.82
97
.69
17,5
1.89
48
7.25
3,3
BH5
1
1 1/4 1 1/2
2
25
32
40
50
4.72
6.5
6.5
7.48
120
165
165
190
10.04 10.04 12.52 14.76
255
255
318
375
5.43 6.77 6.77 6.77
138
172
172
172
.89
1.38 1.38 1.77
22,5
35
35
45
2.20 3.07 3.07 3.35
56
78
78
85
11
24.25 24.25
33
5
11
11
15
BY5
BY7
BY7
BH8
3/8
10
3.35
85
6.89
175
3.46
88
.35
9
1.5
38
4.25
2
BH3
1/2
15
4.13
105
8.46
215
3.82
97
.47
12
1.89
48
7.75
3,5
BH5
3/4
1
1 1/4 1 1/2
2
20
25
32
40
50
4.72
6.5
6.5
7.48 8.66
120
165
165
190
220
10.04 11.02 12.40 14.96 17.72
255
280
315
380
450
5.43 5.43 6.77 6.77 9.21
138
138
172
172
234
.59
.79
1.06 1.26 1.57
15
20
27
32
40
2.20 3.07 3.07 3.35 3.74
56
78
78
85
95
11.5 24.25 24.25 36.25 57.25
5,3
11
11
16,5
26
2B4
2B4
BY7
BH8
2B8
FULL PORT FIG. 1690Y 30

SIZE
inch
mm
1690 LTD.
A
B open
C
F
G
Weight
PACKING
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/4
6
3.35
85
6.89
175
3.46
88
.28
7
1.5
38
4.25
2
BH3
21
GLOBE VALVES- WELDED BONNET- FULL PORT (Y TYPE)

2680 LTD.
4500 LTD.
Marking MSS SP25
Integral backseat
Loose solid disc
Ratings:
462 bar + 38C
776 bar + 38C
SEAL WELD

SIZE
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
2680 LTD.
A
B open
C
F
G
Weight
1/4
6
4.13
105
8.66
220
3.46
88
.28
7
1.89
48
7.75
3,5
BH4
3/8
10
4.13
105
8.66
220
3.46
88
.35
9
1.89
48
7.75
3,5
BH4
1/2
15
4.72
120
9.45
240
5.43
138
.43
11
2.20
56
11
5
2B3
3/4
1
20
25
6.5
6.5
165
165
10.83 12.20
275
310
5.43 5.43
138
138
.57
.75
14,5
19
3.07 3.07
78
78
25.25 27.5
11,5 12,5
2B4
2B5
1 1/2
40
7.48
190
14.17
360
6.77
172
1.10
28
3.35
85
37.25
17
2B5
2
50
8.66
220
17.32
440
9.21
234
1.38
35
3.74
95
57.25
26
2B8
3/8
10
4.72
120
9.45
240
5.43
138
.28
7
2.20
56
12
5,5
2B3
1/2
15
4.72
120
9.65
245
5.43
138
.31
8
2.20
56
12.25
5,6
2B3
3/4
1
20
25
6.5
6.5
165
165
12.01 12.20
305
310
6.77 6.77
172
172
.43
.55
11
14
3.07 3.07
78
78
30.75 30.75
14
14
2B4A 4B5
1 1/2
40
8.66
220
16.54
420
9.21
234
.98
25
3.74
95
61.75
28
2B8
2
50
9.06
230
17.72
450
15.75
400
1.26
32
4.72
120
70.5
32
4B8
PACKING
Note: Thread End Valves are limited to ASME B16.34, 2500 Pressure Class.
SIZE
inch
mm
4500 LTD.
A
B open
C
F
G
Weight
PACKING
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/4
6
4.72
120
9.45
240
5.43
138
.28
7
2.20
56
12
5,5
2B3

22
Overview ......................................... 24
1500 lb. valves................................ 25
2500 lb. valves................................ 26
1500 lb. valves................................ 27
4500 lb. valves................................ 28
1690 lb. valves................................ 29
4500 lb. valves................................ 30
C HECK V ALVES
23
OVERVIEW
CHECK VALVES
Forged steel, piston, ball or
swing check. Full or conventional port. Bolted or welded
cover joint. T-Pattern or
Y-Pattern. Integral body seat
for piston or ball check.
Separate seat ring design for
the swing check valve.
1. BODY. The body is forged steel and designed to the basic

dimensional requirements of the applicable specifications such as
API 602 and ASME B16.34. The body is available in both the full or
conventional port design. It is also available in either T-Pattern or
Y-Pattern configurations.
2. COVER. The cover is forged steel and designed to the basic
dimensional requirements of the applicable specifications such as
API 602 and ASME B16.34.
3. BODY-COVER JOINT. Two different cover joint designs are available.
These are either the bolted cover or the threaded and seal welded type.
4. GASKET. The bolted cover joint design valve uses a contained,
5. COVER BOLTING. The cover bolting is manufactured of alloy steel in

accordance with the requirements of the applicable specifications
such as API 602 and ASME B16.34.
6. SEAT. The body seat for the piston and ball check valves is an integral
weld overlay and is part of the valve trim. The swing check valve is
supplied with a separate seat ring which is pressed into the valve
body and wedged into place, forming a seal with the body.
7. PISTON, BALL OR DISC. The piston, ball or disc is forged steel and
is part of the valve trim. The seating surface of the piston and ball
check is of the tapered or plug type design. The seating surface of the
swing check is of the flat seat design.
8. SPRING. The spring is optional and supplied only upon request.
24
CHECK VALVES- BOLTED BONNET- FULL & REDUCED PORT

800 LB.
1500 LB.
ASME B16.34 - BS 5352
Marking MSS SP25
Spring on request only
Spiral-wound gasket
Ratings:
138 bar + 38C
255 bar + 38C
FULL PORT FIG. H 40 - H 50 - H 60
800 LB.
A
B
F Piston/
F Ball
F Swing
G
Weight
GASKET
*For swing type
1/4
6
inch 3.15
m m 80*
inch 2.17
mm
55
inch .28
mm
7
inch .31
mm
8
inch 1.26
mm
32
lb.
3
1,4
kg
G2
only A=90mm
3/8
10
3.15
80
2.17
55
.35
9
.38
9,6
1.26
32
3
1,4
G2
3.54inch
REDUCED PORT FIG. HL 40 - HL 50 - HL 60

1/2
15
3.54
90
2.36
60
.51
13
.55
14
1.50
38
3.5
1,6
G2
3/4
20
4.33
110
3.07
78
.69
17,5
.71
18
1.89
48
6.5
3
G3
1
25
5
127
3.46
88
.89
22,5
.94
24
2.20
56
9.5
4,3
G4
1 1/4
32
5.91
150
3.62
92
1.16
29,5
1.18
30
2.52
64
12.25
5,6
G6
1 1/2
40
7.09
180
4.25
108
1.38
35
1.44
36,6
3.07
78
22
10
G7
2
50
8.27
210
5.71
145
1.77
45
1.89
48
3.35
85
35.25
16
G9
SIZE
1500 LB.
A
B
F Piston/
F Ball
F Swing
G
Weight
GASKET
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/4
6
3.54
90
2.36
60
.28
7
1.5
38
3.75
1,7
G1
3/8
10
3.54
90
2.36
60
.35
9
1.5
38
3.75
1,7
G1
F Piston/
F Ball
G
Weight
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
GASKET
1/2
15
3.15
80
2.17
55
.35
9
.38
9,6
1.26
32
2.75
1,3
G2
3/4
20
3.54
90
2.36
60
.51
13
.55
14
1.5
38
3.5
1,6
G2
1
25
4.33
110
3.07
78
.69
17,5
.71
18
1.89
48
6.25
2,8
G3
1 1/2
2
40
50
5.91 7.09
150
180
3.62 4.25
92
108
1.16 1.38
29,5
35
1.18 1.44
30
36,6
2.52 3.07
64
78
12.25 19.75
5,6
9,0
G6
G7
REDUCED PORT FIG. 9HL 40 - 9HL 50 - 9HL 60

1/2
15
4.33
110
3.07
78
.47
12
.55
14
1.89
48
6.75
3,1
G2
3/4
20
5
127
3.46
88
.59
15
.71
18
2.20
56
10
4,6
G3
1
1 1/4 1 1/2
2
25
32
40
50
5.91 7.09 8.27 8.27
150
180
210
210
3.62 4.25 5.71 5.91
92
108
145
150
.79
1.06 1.26 1.57
20
27
32
40
.94
1.18 1.44 1.89
24
30
36,6
48
2.52 3.07 3.35 3.74
64
78
85
95
14.25 23.25 41.75 41.75
6,5
10,6
19
19
G4
G5
G7
G8
25
SIZE
inch
mm
1500 LB.
inch
mm
F Swing
FULL PORT FIG. 9H 40 - 9H 50 - 9H 60

SIZE
inch
mm
800 LB.
SIZE
inch
mm
B
F Piston/
F Ball
F Swing
G
Weight
GASKET
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/2
15
3.54
90
2.36
60
.35
9
.38
9,6
1.5
38
3.75
1,7
G1
3/4
20
4.33
110
3.07
78
.47
12
.55
14
1.89
48
6.5
3
G2
1
25
5
127
3.46
88
.59
15
.71
18
2.20
56
9.75
4,4
G3
1 1/2
40
7.09
180
4.25
108
1.06
27
1.18
30
3.07
78
22
10
G5
2
50
8.27
210
5.71
145
1.26
32
1.44
36,6
3.35
85
39.5
18
G7
CHECK VALVES- BOLTED BONNET- FULL PORT

1500 LB.
2500 LB.
ASME B16.34 - BS 5352
Marking MSS SP25
255 bar + 38C
425 bar + 38C
FULL PORT FIG. H9R 40 - H9R 50 - H9R 60

SIZE
inch
mm
1500 LB.
A
B
F Piston/
F Ball
F Swing
G
Weight
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
GASKET
1/2
15
4.33
110
3.78
96
.47
12
.55
14
1.5
38
7
3,2
R12
3/4
20
5.91
150
5.04
128
.59
15
.71
18
2.17
55
16
7,3
R17
1
25
5.91
150
5.04
128
.75
19
.94
24
2.17
55
16
7,3
R17
1 1/2
40
8.27
210
6.10
155
1.26
32
1.44
36,6
2.95
75
37.5
17
R20
2
50
9.06
230
7.68
195
1.5
38
1.89
48
3.62
92
63.75
29
R24
1
25
8.27
210
5.98
152
.75
19
.77
19,5
2.95
75
40.75
18,5
R17
1 1/2
40
9.06
230
7.48
190
1.10
28
1.10
28
3.74
95
66
30
R20
2
50
9.06
230
7.48
190
1.38
35
1.38
35
3.74
95
66
30
R20
FULL PORT FIG. 25HR 40 - 25HR 50 - 25HR 60

SIZE
inch
mm
2500 LB.
A
B
F Piston/
F Ball
F Swing
G
Weight
GASKET
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/2
15
5.91
150
5.04
128
.43
11
.45
11,5
2.17
55
16.5
7,5
R16
3/4
20
5.91
150
5.04
128
.57
14,5
.59
15
2.17
55
16.5
7,5
R16
26
CHECK VALVES- WELDED BONNET- FULL & REDUCED PORT

800 LB.
1500 LB.
ASME B16.34 - BS 5352
Marking MSS SP25
Ratings:
138 bar + 38C
255 bar + 38C
FULL PORT FIG. W 40 - W 50 - W 60

inch
mm
800 LB.
A
B
F Piston/
F Ball
F Swing
G
Weight
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/4
6
3.15
80
2.17
55
.28
7
.31
8
1.26
32
2
1
3/8
10
3.15
80
2.17
55
.35
9
.38
9,6
1.26
32
2
1
1/2
15
3.54
90
2.36
60
.51
13
.55
14
1.50
38
2.5
1,2
3/4
20
4.33
110
3.07
78
.69
17,5
.71
18
1.89
48
5
2,3
1
25
5
127
3.46
88
.89
22,5
.94
24
2.20
56
7.25
3,3
1 1/4
32
5.91
150
3.62
92
1.16
29,5
1.18
30
2.52
64
11.5
5,2
1 1/2
40
7.09
180
4.33
110
1.38
35
1.44
36,6
3.07
78
19
8,7
2
50
8.27
210
5.91
150
1.77
45
1.89
48
3.35
85
30.75
14
SIZE
1500 LB.
A
B
F Piston/
F Ball
F Swing
G
Weight
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/4
6
3.54
90
2.17
55
.28
7
.31
8
1.50
38
3
1,4
3/8
10
3.54
90
2.17
55
.35
9
.38
9,6
1.50
38
3
1,4
F Piston/
F Ball
G
Weight
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/2
15
3.15
80
2.13
54
.35
9
.38
9,6
1.26
32
1.75
0,9
3/4
20
3.54
90
2.36
60
.51
13
.55
14
1.50
38
2.25
1,1
1
25
4.33
110
3
76
.69
17,5
.71
18
1.89
48
5
2,3
1 1/2
40
5.91
150
3.62
92
1.16
29,5
1.18
30
2.52
64
11
5
2
50
7.09
180
4.33
110
1.38
35
1.44
36,6
3.07
78
18.25
8,3
1 1/2
40
7.09
180
4.33
110
1.06
27
1.18
30
3.07
78
21
9,6
2
50
8.27
210
5.91
150
1.26
32
1.44
36,6
3.35
85
35.25
16
REDUCED PORT FIG. 9WL 40 - 9WL 50 - 9WL 60

1/2
15
4.33
110
3
76
.47
12
.55
14
1.89
48
5.5
2,5
3/4
20
5
127
3.31
84
.59
15
.71
18
2.20
56
8
3,7
1
25
5.91
150
3.54
90
.79
20
.94
24
2.52
64
13.25
6
1 1/4
32
7.09
180
4.33
110
1.06
27
1.18
30
3.07
78
22
10
1 1/2
40
8.27
210
5.91
150
1.26
32
1.44
36,6
3.35
85
34.25
15,5
27
2
50
9.06
230
9.06
230
1.57
40
1.89
48
3.74
95
48.5
22
SIZE
inch
mm
1500 LB.
inch
mm
F Swing
FULL PORT FIG. 9W 40 - 9W 50 - 9W 60

SIZE
inch
mm
800 LB.
SIZE
REDUCED PORT FIG. WL 40 - WL 50 - WL 60
B
F Piston/
F Ball
F Swing
G
Weight
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/2
15
3.54
90
2.13
54
.35
9
.38
9,6
1.5
38
3
1,4
3/4
20
4.33
110
3
76
.47
12
.55
14
1.89
48
4.75
2,2
1
25
5
127
3.39
86
.59
15
.71
18
2.20
56
6.5
3
CHECK VALVES- WELDED BONNET- FULL PORT

2500 LTD.
4500 LTD.
Marking MSS SP25
Ratings:
6250 psig @ 100F
431 bar + 38C
776 bar + 38C
FULL PORT FIG. 25W 40 - 25W 50
2500 LTD.
SIZE
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
A
B
F
G
Weight
1/4
6
4.33
110
2.76
70
.28
7
1.89
48
7
3,2
3/8
10
4.33
110
2.76
70
.35
9
1.89
48
7
3,2
1/2
15
5
127
3.39
86
.43
11
2.20
56
8.25
3,8
3/4
20
5.91
150
3.62
92
.57
14,5
2.52
64
12.25
5,6
1
25
7.09
180
4.33
110
.75
19
3.07
78
22
10
1 1/2
40
8.27
210
5.91
150
1.10
28
3.35
85
35.25
16
2
50
9.06
230
7.09
180
1.38
35
3.74
95
46.25
21
3/8
10
5
127
3.54
90
.28
7
2.20
56
8.5
3,9
1/2
15
5
127
3.54
90
.31
8
2.20
56
8.5
3,9
3/4
20
7.09
180
4.33
110
.43
11
3.07
78
23
10,5
1
25
7.09
180
4.33
110
.55
14
3.07
78
23
10,5
1 1/2
40
9.06
230
7.09
180
.98
25
3.74
95
55.5
25,2
2
50
9.06
230
7.68
195
1.26
32
4.72
120
59.5
27
FULL PORT FIG. 45W 40 - 45W 50
4500 LTD.
SIZE
A
B
F
G
Weight
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/4
6
5
127
3.54
90
.28
7
2.20
56
8.5
3,9

28
CHECK VALVES- WELDED BONNET- FULL PORT (Y TYPE)

800 LTD.
1690 LTD.
ASME B16.34 Limited Class - BS 5352
Marking MSS SP25
Ratings:
2000 psig @ 100F
138 bar + 38C
4225 psig @ 100F
291 bar + 38C
FULL PORT FIG. Y 40 - Y 50
800 LTD.
SIZE
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
A
B
F
G
Weight
1/4
6
3.35
85
2.76
70
.28
7
1.50
38
2.5
1,2
3/8
10
3.35
85
2.76
70
.35
9
1.50
38
2.5
1,2
1/2
15
3.35
85
2.76
70
.51
13
1.50
38
2.5
1,2
3/4
20
4.13
105
3.54
90
.69
17,5
1.89
48
5
2,3
1
25
4.72
120
3.93
100
.89
22,5
2.20
56
6.5
3
1 1/4
32
6.5
165
5.12
130
1.16
29,5
3.07
78
17.5
8
1 1/2
40
6.5
165
5.12
130
1.38
35
3.07
78
17.5
8
2
50
7.48
190
6.3
160
1.77
45
3.35
85
26.25
12
1/2
15
4.13
105
3.54
90
.47
12
1.89
48
5.25
2,4
3/4
20
4.72
120
3.93
100
.59
15
2.20
56
7.75
3,6
1
25
6.5
165
5.12
130
.79
20
3.07
78
20.5
9,3
1 1/4
32
6.5
165
5.12
130
1.06
27
3.07
78
28.5
13
1 1/2
40
7.48
190
6.3
160
1.26
32
3.35
85
29.75
13,5
2
50
8.66
220
7.68
195
1.57
40
3.74
95
39.5
18
FULL PORT FIG. 1690Y 40 - 1690Y 50
1690 LTD.
SIZE
A
B
F
G
Weight
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/4
6
3.35
85
2.76
70
.28
7
1.50
38
2.5
1,2
3/8
10
3.35
85
2.76
70
.35
9
1.50
38
2.5
1,2
29
CHECK VALVES- WELDED BONNET- FULL PORT (Y TYPE)

2680 LTD.
4500 LTD.
ASME B16.34 Limited Class - BS 5352
Marking MSS SP25
Ratings:
6700 psig @ 100F
462 bar + 38C
776 bar + 38C
FULL PORT FIG. 2680Y 40 - 2680Y 50

SIZE
inch
mm
1/4
6
4.13
105
3.35
85
.28
7
1.89
48
7
3,2
3/8
10
4.13
105
3.35
85
.35
9
1.89
48
7
3,2
1/2
15
4.72
120
3.74
95
.43
11
2.20
56
8
3,7
3/4
1
20
25
6.5
6.5
165
165
4.53 4.72
115
120
.57
.75
14,5
19
3.07 3.07
78
78
19.75 19.75
9
9
1 1/2
40
7.48
190
5.71
145
1.10
28
3.35
85
29.75
13,5
2
50
8.66
220
7.28
185
1.38
35
3.74
95
44
20
1/2
15
4.72
120
3.74
95
.31
8
2.20
56
8
3,7
3/4
1
20
25
6.5
6.5
165
165
4.53 4.72
115
120
.43
.55
11
14
3.07 3.07
78
78
19.75 19.75
9
9
1 1/2
40
8.66
220
7.28
185
.98
25
3.74
95
44
20
2
50
9.06
230
7.68
195
1.26
32
4.72
120
50.5
23
2680 LTD.
inch
mm
inch
B
mm
inch
F
mm
inch
G
mm
lb.
Weight
kg
Note: Thread End Valves are limited to ASME B16.34 2500 Pressure Class.
A
REDUCED PORT FIG. 45Y 40 - 45Y 50
4500 LTD.
SIZE
A
B
F
G
Weight
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb.
kg
1/4
6
4.72
120
3.74
95
.28
7
2.20
56
8
3,7
3/8
10
4.72
120
3.74
95
.28
7
2.20
56
8
3,7

30

FSV01

Uploaded by

Copyright:

Available Formats

FSV01

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

FSV01

Uploaded by

Copyright:

Available Formats

Overview .........................................

1. BODY. The body is forged steel and designed to the basic

GATE VALVES- BOLTED BONNET- FULL & REDUCED PORT

FULL PORT FIG. H 10

REDUCED PORT FIG. 9HL 10

Materials and trim specifications Page 91

FULL PORT FIG. 9H 10

REDUCED PORT FIG. HL 10

GATE VALVES- BOLTED BONNET- FULL PORT

FULL PORT FIG. H9R 10

FULL PORT FIG. 25HR 10

Materials and trim specifications Page 91

GATE VALVES- WELDED BONNET- FULL & REDUCED PORT

FULL PORT FIG. W 10

REDUCED PORT FIG. 9WL 10

Materials and trim specifications Page 91

FULL PORT FIG. 9W 10

REDUCED PORT FIG. WL 10

GATE VALVES- WELDED BONNET- FULL PORT

FULL PORT FIG. 25W 10

FULL PORT FIG. 45W 10

Available with Socket Weld or Butt-Weld Ends Only.

GLOBE VALVES- BOLTED BONNET- FULL & REDUCED PORT

FULL PORT FIG. H 30

REDUCED PORT FIG. 9HL 30

Materials and trim specifications Page 91

FULL PORT FIG. 9H 30

REDUCED PORT FIG. HL 30

GLOBE VALVES- BOLTED BONNET- FULL PORT

FULL PORT FIG. H9R 30

FULL PORT FIG. 25HR 30

Materials and trim specifications Page 91

GLOBE VALVES- WELDED BONNET- FULL & REDUCED PORT

FULL PORT FIG. W 30

REDUCED PORT FIG. 9WL 30

Materials and trim specifications Page 91

FULL PORT FIG. 9W 30

REDUCED PORT FIG. WL 30

GLOBE VALVES- WELDED BONNET- FULL PORT

FULL PORT FIG. 25W 30

FULL PORT FIG. 45W 30

Available with Socket Weld or Butt-Weld Ends only.

GLOBE VALVES- WELDED BONNET- FULL PORT (Y TYPE)

FULL PORT FIG. Y 30

FULL PORT FIG. 1690Y 30

Materials and trim specifications Page 91

GLOBE VALVES- WELDED BONNET- FULL PORT (Y TYPE)

FULL PORT FIG. 2680Y 30

Available with Socket Weld or Butt-Weld Ends only.

1. BODY. The body is forged steel and designed to the basic

5. COVER BOLTING. The cover bolting is manufactured of alloy steel in

CHECK VALVES- BOLTED BONNET- FULL & REDUCED PORT

FULL PORT FIG. H 40 - H 50 - H 60

REDUCED PORT FIG. HL 40 - HL 50 - HL 60

Materials and trim specifications Page 91

REDUCED PORT FIG. 9HL 40 - 9HL 50 - 9HL 60

FULL PORT FIG. 9H 40 - 9H 50 - 9H 60

CHECK VALVES- BOLTED BONNET- FULL PORT

FULL PORT FIG. H9R 40 - H9R 50 - H9R 60