Audio, Visual, Navigation & Telephone Sys-TEM: Section

AUDIO, VISUAL, NAVIGATION & TELEPHONE SYSTEM
K ELECTRICAL
AUDIO, VISUAL, NAVIGATION & TELEPHONE SYS-

SECTION AV B
TEM
D
E
CONTENTS
PRECAUTIONS .......................................................... 3 Changer .................................................................. 30 F
Precautions for Supplemental Restraint System Terminals and Reference Value for A/C and AV
(SRS) “AIR BAG” and “SEAT BELT PRE-TEN- Switch ..................................................................... 31
SIONER” .................................................................. 3 Terminals and Reference Value for Display Control G
AUDIO (WITH INTEGRATED DISPLAY SYSTEM)..... 4 Unit ......................................................................... 31
System Description .................................................. 4 A/C and AV Switch Self-Diagnosis Function .......... 32
AUDIO SYSTEM ................................................... 4 STARTING THE SELF-DIAGNOSIS MODE ....... 32
H
Component Parts Location ....................................... 5 DIAGNOSIS FUNCTION ..................................... 32
Schematic ................................................................ 6 EXITING THE SELF-DIAGNOSIS MODE ........... 32
Wiring Diagram — AUDIO — ................................... 7 Symptom Chart ....................................................... 33
Terminals and Reference Value for Audio Unit ........11 Removal and Installation of Audio Unit ................... 34 I
Terminals and Reference Value for A/C and AV REMOVAL ........................................................... 34
Switch ..................................................................... 12 INSTALLATION ................................................... 35
Terminals and Reference Value for Display Unit ... 12 Removal and Installation of Rear Audio Control J
A/C and AV Switch Self-Diagnosis Function .......... 13 Switch ..................................................................... 36
STARTING THE SELF-DIAGNOSIS MODE ....... 13 REMOVAL ........................................................... 36
DIAGNOSIS FUNCTION ..................................... 13 INSTALLATION ................................................... 36
AV
EXITING THE SELF-DIAGNOSIS MODE ........... 13 Removal and Installation of CD Auto Changer ....... 36
Symptom Chart ...................................................... 14 REMOVAL ........................................................... 36
Removal and Installation of Audio Unit .................. 15 INSTALLATION ................................................... 36
REMOVAL ........................................................... 15 Removal and Installation of Front Door Speaker ... 37 L
INSTALLATION ................................................... 16 REMOVAL ........................................................... 37
Removal and Installation of Front Door Speaker ... 16 INSTALLATION ................................................... 37
REMOVAL ........................................................... 16 Removal and Installation of Rear Door Speaker ... 37 M
Removal and Installation of Rear Door Speaker ... 17 INSTALLATION ................................................... 37
REMOVAL ........................................................... 17 Removal and Installation of Tweeter ...................... 37
Removal and Installation of Tweeter ...................... 17 INSTALLATION ................................................... 37
REMOVAL ........................................................... 17 AUDIO ANTENNA .................................................... 38
INSTALLATION ................................................... 17 Wiring Diagram — W/ANT — ................................. 38
AUDIO (WITH INTEGRATED COLOR DISPLAY Location of Antenna ................................................ 39
SYSTEM) .................................................................. 18 Window Antenna Repair ......................................... 39
System Description ................................................ 18 CHECK ELEMENT .............................................. 39
AUDIO SYSTEM ................................................. 18 Removal and Installation of Antenna Amp. ............ 40
Component Parts Location ..................................... 19 REMOVAL ........................................................... 40
Schematic .............................................................. 20 INSTALLATION ................................................... 40
Wiring Diagram — AUDIO — ................................. 21 INTEGRATED DISPLAY SYSTEM ........................... 41
Terminals and Reference Value for Audio Unit ....... 28 System Description ................................................. 41
Terminals and Reference Value for CD Auto INTEGRATED DISPLAY SYSTEM ...................... 41
AV-1
Component Description .......................................... 41 DIAGNOSIS FUNCTION .....................................84
DISPLAY UNIT .................................................... 41 EXITING THE SELF-DIAGNOSIS MODE ...........84
A/C AND AV SWITCH ......................................... 41 On Board Self-Diagnosis Function ..........................85
CAN Communication Unit ....................................... 41 DESCRIPTION ....................................................85
Component Parts Location ..................................... 41 DIAGNOSIS ITEM ...............................................85
Schematic ............................................................... 42 OPERATION PROCEDURE ................................86
Wiring Diagram — INF/D — ................................... 43 Self-Diagnosis Mode ...............................................87
Schematic ............................................................... 48 DIAGNOSIS PROCEDURE .................................87
Wiring Diagram — COMM — ................................. 49 SELF-DIAGNOSIS RESULT ................................88
Terminals and Reference Value for Display Unit ... 52 Confirmation Mode ..................................................89
Terminals and Reference Value for A/C and AV DIAGNOSIS PROCEDURE .................................89
Switch ..................................................................... 53 DCU .....................................................................89
A/C and AV Switch Self-Diagnosis Function ........... 54 HVAC ...................................................................92
STARTING THE SELF-DIAGNOSIS MODE ........ 54 CAN DIAGNOSIS ................................................93
DIAGNOSIS FUNCTION ..................................... 54 CONSULT-II Functions (REAR VIEW CAMERA) ...94
EXITING THE SELF-DIAGNOSIS MODE ........... 54 CONSULT-II BASIC OPERATION PROCEDURE
On Board Self-Diagnosis Function ......................... 55 ...94
DESCRIPTION .................................................... 55 WORK SUPPORT ...............................................94
DIAGNOSIS ITEM ............................................... 55 DATA MONITOR ..................................................94
Self-Diagnosis Mode .............................................. 55 Vehicle Width and Distance Guiding Line Correction...95
OPERATION PROCEDURES ............................. 55 DESCRIPTION ....................................................95
EXITING THE SELF-DIAGNOSIS MODE ........... 56 VEHICLE WIDTH AND DISTANCE GUIDING
Symptom Chart ....................................................... 57 LINE CORRECTION PROCEDURE ....................95
Unable to Operate System with A/C and AV Switch... 58 Unable to Operate System with A/C and AV Switch...97
Removal and Installation of Display Unit ................ 60 All Images Are Not Displayed .................................99
REMOVAL ........................................................... 60 Rear View Image Is Not Displayed (RGB Image Is
INSTALLATION .................................................... 60 Displayed) ............................................................. 101
Removal and Installation of A/C and AV Switch ..... 60 When Displaying Rear View Image, SETTING
REMOVAL ........................................................... 60 Menu Is Not Displayed .......................................... 106
INSTALLATION .................................................... 60 Tint Is Strange for The RGB Image ....................... 107
INTEGRATED COLOR DISPLAY SYSTEM .............. 61 RGB Image Is Rolling ........................................... 109
System Description ................................................. 61 Values for All Items in The TRIP Screen Do Not
INTEGRATED COLOR DISPLAY SYSTEM ........ 61 Change ................................................................. 110
REAR VIEW MONITOR ...................................... 61 Values for Items, “Driving Distance” and “Average
Component Description .......................................... 62 Speed” Do Not Change ......................................... 110
DISPLAY CONTROL UNIT .................................. 62 Values for All Items in The FUEL ECONOMY Screen
DISPLAY .............................................................. 62 Do Not Change ..................................................... 110
A/C AND AV SWITCH ......................................... 62 Example of Symptoms Possible No Malfunction . 111
REAR VIEW CAMERA ........................................ 62 DISPLAY ............................................................ 111
REAR VIEW CAMERA CONTROL UNIT ............ 63 REAR VIEW MONITOR ..................................... 111
CAN Communication Unit ....................................... 63 Removal and Installation of A/C and AV Switch .... 112
Component Parts Location ..................................... 63 REMOVAL .......................................................... 112
Schematic — INF/D — ........................................... 64 INSTALLATION .................................................. 112
Wiring Diagram — INF/D — ................................... 65 Removal and Installation of Display ...................... 112
Schematic — COMM — ......................................... 72 REMOVAL .......................................................... 112
Wiring Diagram — COMM — ................................. 73 INSTALLATION .................................................. 112
Terminals and Reference Value for Display Control Removal and Installation of Display Control Unit . 112
Unit ......................................................................... 77 REMOVAL .......................................................... 112
Terminals and Reference Value for Display ............ 80 INSTALLATION .................................................. 112
Terminals and Reference Value for A/C and AV Removal and Installation of Rear View Camera ... 113
Switch ..................................................................... 82 REMOVAL .......................................................... 113
Terminals and Reference Value for Rear View Cam- INSTALLATION .................................................. 113
era Control Unit ...................................................... 83 Removal and Installation of Rear View Camera Con-
Special Note for Trouble Diagnosis ........................ 84 trol Unit .................................................................. 113
A/C and AV Switch Self-Diagnosis Function ........... 84 REMOVAL .......................................................... 113
STARTING THE SELF-DIAGNOSIS MODE ........ 84 INSTALLATION .................................................. 113
AV-2
PRECAUTIONS
PRECAUTIONS PFP:00001
A
Precautions for Supplemental Restraint System (SRS) “AIR BAG” and “SEAT
BELT PRE-TENSIONER” BKS00201
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along B
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SRS and SB section of
this Service Manual. C
WARNING:
● To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision that would result in air bag inflation, all maintenance must be performed
by an authorized NISSAN/INFINITI dealer. D
● Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section. E
● Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors. F
AV
AV-3
AUDIO (WITH INTEGRATED DISPLAY SYSTEM)
AUDIO (WITH INTEGRATED DISPLAY SYSTEM) PFP:28185
System Description BKS0020H
AUDIO SYSTEM
● The audio system with the A/C and AV switch (operation panel switch) and the audio unit are designed
separately has been adopted.
● Operation signal from A/C and AV switch is transmitted to audio unit through display unit with the commu-
nication line, and it controls the audio system.
● Display signal from audio unit is transmitted to display unit through the communication line, and then the
operating state of the audio system is displayed in the screen.
● A/C and AV switch can perform the operation check of each switch by starting the self-diagnosis. For
details, refer to AV-13, "A/C and AV Switch Self-Diagnosis Function" .
● For Audio System operation information, refer to Owner's Manual.
SKIB8799E
AV-4
Component Parts Location BKS0020I
J
SKIB8800E
AV
AV-5
Schematic BKS0020J
TKWM4654E
AV-6
Wiring Diagram — AUDIO — BKS0020K
AV
TKWM4655E
AV-7
TKWM4656E
AV-8
AV
TKWM4657E
AV-9
TKWM4658E
AV-10
Terminals and Reference Value for Audio Unit BKS0020L
A
Terminal
Signal Condition
(Wire color)
Item input/ Reference value
output Ignition
+ – Operation B
switch
C
Audio signal front door
2 (L/Y) 1 (L/B) Output ON Receive audio signal
speaker LH
D
SKIB3609E

4 (W/B) 3 (G/B) Output ON Receive audio signal
speaker RH
F
SKIB3609E
Antenna amp. ON G
5 (G/W) Ground Output ON — Approx. 12 V
signal
6 (Y) Ground Battery power supply Input OFF — Battery voltage
10 (V) Ground ACC power supply Input ACC — Battery voltage H
I
Audio signal rear door
14 (LG) 13 (B/Y) Output ON Receive audio signal
speaker LH
J
SKIB3609E
AV
16 (L) 15 (R) Output ON Receive audio signal
speaker RH
L
SKIB3609E
Communication signal Operate audio volume

21 (Y) Ground Output ON
(AUD-DSP) switch
SKIB3606E

23 (G) Ground Input ON
(DSP-AUD) switch
SKIB3607E
25 — Shield — — — —
AV-11
Terminals and Reference Value for A/C and AV Switch BKS0020N
Terminal
Signal Condition
(Wire color)
output Ignition
+ – Operation
switch
7 (V) Ground ACC power supply Input ACC — Battery voltage
Communication Input/
11 (Y) Ground ON —
signal (–) Output
SKIB7379E
12 (BR) Ground ON —
signal (+) Output
SKIB7378E
13 (B) Ground Ground — ON — Approx. 0 V

14 — Shield — — — —
Terminals and Reference Value for Display Unit BKS0020O
Refer to AV-52, "Terminals and Reference Value for Display Unit" .
AV-12
A/C and AV Switch Self-Diagnosis Function BKS0020P
A
Performing self-diagnosis makes it possible to check operation of A/C and AV switch indicator (LED) and other
switches.
STARTING THE SELF-DIAGNOSIS MODE B
1. Turn ignition switch OFF.
2. With three switches (DEF, REC/FRE and MODE) pressed simul-
taneously, turn the ignition switch to ACC. C
SKIB1188E
DIAGNOSIS FUNCTION F
The following are checked:
● All the indicators (LED) in the A/C and AV switch.
G
● Continuity of the switches by sounding the buzzer when pressing the A/C and AV switch.
NOTE:
● Indicators (LED) of REC/FRE switch change to “FRE” → “REC” → “FRE” every time the REC/FRE switch
H
is pressed. (These two do not turn on at the same time.)
● Impossible to check rear window defogger switch operation (No beep sound even under normal status).
EXITING THE SELF-DIAGNOSIS MODE I
● Turn ignition switch OFF.
AV
AV-13
Symptom Chart BKS0020Q
● The majority of the audio malfunctions are the result of outside causes (bad CD, electromagnetic interfer-
ence, etc.). Check the symptoms below to diagnose the malfunction.
● The vehicle itself can be a source of noise if noise prevention parts or electrical equipment is malfunction-
ing. Check if noise is caused and/or changed by engine speed, ignition switch turned to each position, and
operation of each piece of electrical equipment, and then determine the cause.
● CD-R is not guaranteed to play because they can contain compressed audio (MP3, WMA) or could be
incorrectly mastered by the customer on a computer.
● Check if the CDs carry the Compact Disc Logo. If not, the disc is not mastered to the “red book” Compact
Disc Standard and may not play.
● Make sure that other operation except audio system can be performed with A/C and AV switch. If these
operations are inoperative with A/C and AV switch, refer to AV-58, "Unable to Operate System with A/C
and AV Switch" .
Symptom Possible malfunction location
● Audio unit power supply circuit
● Communication signal circuit between audio unit and display unit
Audio system does not work properly.
● A/C and AV switch
● Audio unit
No sound can be heard from all speakers. Audio unit
● Audio signal circuit between audio unit and speaker
● Speaker
No sound can be heard from one or several speakers.
● Tweeter
● Audio unit
● Antenna amp. ON signal circuit
● Antenna feeder
No sound can be heard from radio or noise is caught. ● Rear window antenna
● Antenna amp.
● Audio unit
NOTE:
Noise resulting from variations in field strength, such as fading noise and multi-path noise, or external noise
from trains and other sources. It is not a malfunction.
● Fading noise: This noise occurs because of variations in the field strength in a narrow range due to moun-
tains or buildings blocking the signal.
● Multi-path noise: This noise results from a time difference between the broadcast waves directly from the
station arriving at the antenna and the waves reflected by mountains or buildings.
AV-14
Removal and Installation of Audio Unit BKS0020Z
SKIA8645E
1. Screw 2. Bracket (LH) 3. A/C and AV switch G

4. Audio unit 5. Bracket (RH) 6. Screw
7. Screw 8. Screws 9. Screw
10. Unified meter and A/C amp.
H
REMOVAL
1. Remove instrument panel finishers (C, D). Refer to IP-10, "INSTRUMENT PANEL ASSEMBLY" . I
2. Remove screws (4) and remove audio unit integral with A/C and
AV switch.
J
AV
L
SKIB0873E
3. Remove screws (4). M
SKIB0874E
AV-15
4. Remove screws (2) and remove unified meter and A/C amp.
from bracket.
SKIB0876E
5. Remove screws (2) and remove audio unit with bracket.
SKIB0877E
6. Remove screws (4) and remove bracket.

CAUTION:
Be careful not to allow foreign material to enter from CD
slot.
SKIA6297E
INSTALLATION
Note the following, and installation is the reverse order of removal.
CAUTION:
Unified meter and A/C amp. screws (2) are different from other securing screws. Never confuse them
when installing.
Removal and Installation of Front Door Speaker BKS00211
REMOVAL
1. Remove front door finisher. Refer to EI-35, "DOOR FINISHER" .
2. Remove screws (3) and remove front door speaker.
SKIB0882E
INSTALLATION
Installation is the reverse order of removal.
AV-16
Removal and Installation of Rear Door Speaker BKS00212
REMOVAL A
1. Remove rear door finisher. Refer to EI-35, "DOOR FINISHER" .
2. Remove screws (3) and remove rear door speaker.
B
SKIB0883E
E
INSTALLATION
Removal and Installation of Tweeter BKS00213 F
REMOVAL
1. Remove corner cover inner.
2. Remove screws (2) and remove tweeter. G
SKIB0884E
J
INSTALLATION
Installation is the reverse order of removal. AV
AV-17
AUDIO (WITH INTEGRATED COLOR DISPLAY SYSTEM)
AUDIO (WITH INTEGRATED COLOR DISPLAY SYSTEM) PFP:28185
System Description BKS0028N
AUDIO SYSTEM
● The audio system with the A/C and AV switch (operation panel switch) and the audio unit are designed
separately has been adopted.
● Operation signal from A/C and AV switch is transmitted to audio unit through display control unit with the
communication line, and it controls the audio system.
● Operation signal from rear audio control switch is transmitted to audio unit through A/C and AV switch and
display control unit, and it controls the audio system.
● Display signal from audio unit is transmitted to display control unit through the communication line, and
then the operating state of the audio system is displayed in the screen.
● 6-CD auto changer was installed in the glove box.
● CD auto changer is connected with audio unit through the communication line, and the operation signal
from A/C and AV switch is transmitted to CD auto changer through audio unit.
● A/C and AV switch can perform the operation check of each switch by starting the self-diagnosis. For
details, refer to AV-32, "A/C and AV Switch Self-Diagnosis Function" .
● For Audio System operation information, refer to Owner's Manual.
SKIB8801E
AV-18
Component Parts Location BKS0028O
J
SKIB8802E
AV
AV-19
Schematic BKS0028P
TKWM4659E
AV-20
Wiring Diagram — AUDIO — BKS0028Q
AV
TKWM4660E
AV-21
TKWM4661E
AV-22
AV
TKWM4662E
AV-23
TKWM4663E
AV-24
AV
TKWM4664E
AV-25
TKWM4665E
AV-26
AV
TKWM4666E
AV-27
Terminals and Reference Value for Audio Unit BKS0028R
Terminal
Signal Condition
(Wire color)
output Ignition
+ – Operation
switch

2 (L/Y) 1 (L/B) Output ON Receive audio signal
speaker LH
SKIB3609E

4 (W/B) 3 (G/B) Output ON Receive audio signal
speaker RH
SKIB3609E
Antenna amp. ON
5 (G/W) Ground Output ON — Approx. 12 V
signal

14 (LG) 13 (B/Y) Output ON Receive audio signal
speaker LH
SKIB3609E

16 (L) 15 (R) Output ON Receive audio signal
speaker RH
SKIB3609E

21 (Y) Ground Output ON
(AUD-DCU) switch
SKIB3606E

23 (G) Ground Input ON
(DCU-AUD) switch
SKIB3607E
25 — Shield — — — —
AV-28
Terminal
Signal Condition
(Wire color) A
output Ignition
+ – Operation
switch
B
Play back CD on CD auto

38 (R) 37 (G) Audio signal LH Input ON
changer C
SKIB3609E
D
Play back CD on CD auto E

40 (B) 39 (W) Audio signal RH Input ON
changer
SKIB3609E
F
41 — Shield — — — —
42 — Shield — — — —
G
Communication signal When setting to CD auto H

44 (R) Ground Input ON
REQ (CHG-AUD) changer mode
SKIB7338E
I
J
Communication signal When setting to CD auto
45 (B) Ground Input ON
RX (CHG-AUD) changer mode
AV
SKIB7337E

46 (W) Ground Output ON
TX (AUD-CHG) changer mode
M
SKIB7336E
AV-29
Terminals and Reference Value for CD Auto Changer BKS00291
Terminal
Signal Condition
(Wire color)
output Ignition
+ – Operation
switch

2 (R) 1 (G) Audio signal LH Output ON
changer
SKIB3609E

4 (B) 3 (W) Audio signal RH Output ON
changer
SKIB3609E
5 — Shield — — — —
6 — Shield — — — —

8 (R) Ground Output ON
REQ (CHG-AUD) changer mode
SKIB7338E

9 (B) Ground Output ON
TX (CHG-AUD) changer mode
SKIB7337E

10 (W) Ground Input ON
RX (AUD-CHG) changer mode
SKIB7336E

AV-30
Terminals and Reference Value for A/C and AV Switch BKS0028S
A
Terminal
Signal Condition
(Wire color)
output Ignition
+ – Operation B
switch
Press and hold MODE
Approx. 0 V
switch
C
Press and hold SEEK
Remote control signal Approx. 1.7 V
1 (G/B) 3 (B/W) Input ON DOWN switch
A
Press and hold VOL DOWN
Approx. 3.3 V D
switch
Except for above Approx. 5 V
Press and hold POWER
Approx. 0 V E
switch
Press and hold SEEK UP
2 (R) 3 (B/W) Input ON switch
B F
Press and hold VOL UP
Approx. 3.3 V
switch
G
Remote control
3 (B/W) Ground — ON — Approx. 0 V
ground
H
Communication Input/ I
signal (–) Output
SKIB7379E
J
AV
signal (+) Output
L
SKIB7378E

14 — Shield — — — —
M
Terminals and Reference Value for Display Control Unit BKS0028T
Refer to AV-77, "Terminals and Reference Value for Display Control Unit" .
AV-31
A/C and AV Switch Self-Diagnosis Function BKS0028U
switches.
STARTING THE SELF-DIAGNOSIS MODE
taneously, turn the ignition switch to ACC.
SKIB1188E
DIAGNOSIS FUNCTION
● Continuity of the switches by sounding the buzzer when pressing the rear audio control switch.
NOTE:
EXITING THE SELF-DIAGNOSIS MODE
AV-32
Symptom Chart BKS0028V
A
● The majority of the audio malfunctions are the result of outside causes (bad CD, electromagnetic interfer-
ence, etc.). Check the symptoms below to diagnose the malfunction.
● The vehicle itself can be a source of noise if noise prevention parts or electrical equipment is malfunction-
ing. Check if noise is caused and/or changed by engine speed, ignition switch turned to each position, and B
operation of each piece of electrical equipment, and then determine the cause.
● CD-R is not guaranteed to play because they can contain compressed audio (MP3, WMA) or could be
incorrectly mastered by the customer on a computer. C
● Check if the CDs carry the Compact Disc Logo. If not, the disc is not mastered to the “red book” Compact
Disc Standard and may not play.
● Make sure that other operation except audio system can be performed with A/C and AV switch. If these D
operations are inoperative with A/C and AV switch, refer to AV-97, "Unable to Operate System with A/C
and AV Switch" .
E
Symptom Possible malfunction location
● Audio unit power supply circuit
● Communication signal circuit between audio unit and display unit
Audio system does not work properly. F
● A/C and AV switch
● Audio unit
● CD auto changer power supply circuit G
● Communication signal circuit between audio unit and CD auto changer
CD auto changer does not work properly.
● CD auto changer
● Audio unit H
No sound can be heard from all speakers. Audio unit
● Audio signal circuit between audio unit and speaker
I
● Speaker
No sound can be heard from one or several speakers.
● Tweeter
● Audio unit
J
● Antenna amp. ON signal circuit
● Antenna feeder
No sound can be heard from radio or noise is caught. ● Rear window antenna AV
● Antenna amp.
● Audio unit
● Remote control signal circuit between rear audio control switch and A/C L
Unable to operate audio system with rear audio control and AV switch
switch. ● Rear audio control switch
● A/C and AV switch M
NOTE:
Noise resulting from variations in field strength, such as fading noise and multi-path noise, or external noise
from trains and other sources. It is not a malfunction.
● Fading noise: This noise occurs because of variations in the field strength in a narrow range due to moun-
tains or buildings blocking the signal.
● Multi-path noise: This noise results from a time difference between the broadcast waves directly from the
station arriving at the antenna and the waves reflected by mountains or buildings.
AV-33
Removal and Installation of Audio Unit BKS0028W
SKIB0872E
1. Display control unit 2. Screws 3. Bracket (LH)

4. A/C and AV switch 5. Audio unit 6. Bracket (RH)
7. Screws 8. Screws 9. Screws
10. Screws 11. Screws 12. Unified meter and A/C amp.
REMOVAL
1. Remove instrument panel finishers (C, D). Refer to IP-10, "INSTRUMENT PANEL ASSEMBLY" .
2. Remove screws (4) and remove audio unit integral with A/C and
AV switch.
SKIB0873E
3. Remove screws (4).
SKIB0874E
AV-34
4. Remove screws (4) and remove display control unit from

bracket. A
SKIB0875E
D
5. Remove screws (2) and remove unified meter and A/C amp.
from bracket.
E
G
SKIB0876E
6. Remove screws (2) and remove audio unit with bracket. H
SKIB0877E
AV
CAUTION:
Be careful not to allow foreign material to enter from CD L
slot.
SKIA6297E
INSTALLATION
Note the following, and installation is the reverse order of removal.
CAUTION:
Unified meter and A/C amp. screws (2) are different from other securing screws. Never confuse them
when installing.
AV-35
Removal and Installation of Rear Audio Control Switch BKS002CZ
REMOVAL
1. Remove tray box from the center armrest. Refer to SE-117, "Removal and Installation of Seatback" .
2. Disconnect connector.
3. Push pawl on reverse side and remove the rear audio control
switch.
SKIB1365E
INSTALLATION
Removal and Installation of CD Auto Changer BKS0028X
REMOVAL
1. Remove passenger instrument panel (lower). Refer to IP-10, "INSTRUMENT PANEL ASSEMBLY" .
2. Remove screws (4) and disconnect connector, and remove CD
auto changer.
SKIB0880E
SKIB0881E
INSTALLATION
AV-36
Removal and Installation of Front Door Speaker BKS0028Y
REMOVAL A
1. Remove front door finisher. Refer to EI-35, "DOOR FINISHER" .
2. Remove screws (3) and remove front door speaker.
B
SKIB0882E
E
INSTALLATION
Removal and Installation of Rear Door Speaker BKS0028Z F
REMOVAL
1. Remove rear door finisher. Refer to EI-35, "DOOR FINISHER" .
2. Remove screws (3) and remove rear door speaker. G
SKIB0883E
J
INSTALLATION
Installation is the reverse order of removal. AV
Removal and Installation of Tweeter BKS00290
REMOVAL
1. Remove corner cover inner. L
2. Remove screws (2) and remove tweeter.
SKIB0884E
INSTALLATION
AV-37
AUDIO ANTENNA
AUDIO ANTENNA PFP:28200
Wiring Diagram — W/ANT — BKS0021U
TKWM1709E
AV-38
AUDIO ANTENNA
Location of Antenna BKS0021V
SKIB0885E I
Window Antenna Repair BKS0021W
CHECK ELEMENT J
1. Attach probe circuit tester (ohm setting) to antenna terminal on
each side.
AV
M
SEL250I
● When measuring continuity, wrap tin foil around the top of probe.
Then, press the foil against the wire with your finger.
SEL122R
AV-39
AUDIO ANTENNA
2. If an element is broken, no continuity will exist.
SEL252I
3. To locate a break, move probe along element. Tester needle will

swing abruptly when probe passes the broken point.
SEL253I
Removal and Installation of Antenna Amp. BKS0021X
REMOVAL
1. Remove headlining. Refer to EI-54, "HEADLINING" .
2. Remove screw and disconnect antenna feeder clip and antenna
connector, and then remove antenna amp.
SKIA6302E
INSTALLATION
AV-40
INTEGRATED DISPLAY SYSTEM
INTEGRATED DISPLAY SYSTEM PFP:28090

A
System Description BKS0021Y
For system operation information, refer to Owner's Manual.

INTEGRATED DISPLAY SYSTEM B
● The display unit transmits/receives data signals to/from each control unit with CAN communication. It per-
forms an arithmetical operation on fuel information values by using data obtained from the control units,
and then displays the calculated values on the screen. C
● The display unit receives vehicle speed signals that are transmitted from the unified meter and A/C amp.,
performs an arithmetical operation on drive information values, and then displays the calculated values on
the screen. D
Component Description BKS002D1
DISPLAY UNIT
E
● It receives operation signals of audio system and air conditioner
system from A/C and AV switch, and transmits the operation sig-
nal of audio system to the audio unit through the communication
line and transmits the operation signal of air conditioner system F
to the unified meter and A/C amp. through CAN communication.
● Display signal from audio unit is transmitted to display unit
through the communication line, and then the operating state of G
the audio system is displayed in the screen.
● Display signal from unified meter and A/C amp. is transmitted to
display unit through the CAN communication, and then the oper- H
ating state of the air conditioner system is displayed in the SKIB8803E
screen.
A/C AND AV SWITCH I
● A/C and AV switch, an integrated combination of audio system
and air conditioner system switches, are adopted.
● Operation signal of audio system is transmitted to the audio unit J
through display unit with the communication line.
● Operation signal of air conditioner system is transmitted to uni-
fied meter and A/C amp. through display unit with CAN commu- AV
nication.
L
SKIB8803E
CAN Communication Unit BKS00220

M
Refer to LAN-49, "CAN System Specification Chart" .
Component Parts Location BKS00221
Refer to AV-5, "Component Parts Location" .
AV-41
Schematic BKS00222
TKWM4667E
AV-42
Wiring Diagram — INF/D — BKS00223
AV
TKWM1664E
AV-43
TKWM4668E
AV-44
AV
TKWM4669E
AV-45
TKWM1667E
AV-46
AV
TKWM4670E
AV-47
Schematic BKS00224
TKWH0379E
AV-48
Wiring Diagram — COMM — BKS00225
AV
TKWM1669E
AV-49
TKWM4679E
AV-50
AV
TKWM4680E
AV-51
Terminals and Reference Value for Display Unit BKS00226
Terminal
Signal Condition
(Wire color)
output Ignition
+ – Operation
switch
3 (G) Ground Ignition signal Input ON — Battery voltage
Lighting switch ON Approx. 12 V
4 (R/L) Ground Illumination signal Input ON
Lighting switch OFF Approx. 0 V
NOTE:
Maximum voltage may be 5 V
due to specifications (connected
units).
Vehicle speed signal When vehicle speed is

7 (V/W) Ground Input ON
(8-pulse) approx. 40 km/h (25 MPH)
PKIA1935E

8 (G) Ground Output ON
(DSP-AUD) switch
SKIB3607E
9 — Shield — — — —

10 (Y) Ground Input ON
(AUD-DSP) switch
SKIB3606E
signal (+) Output
SKIB7378E
12 — Shield — — — —
signal (–) Output
SKIB7379E
14 (L) — CAN-H — — — —
16 (P) — CAN-L — — — —
AV-52
Terminals and Reference Value for A/C and AV Switch BKS00227
A
Terminal
Signal Condition
(Wire color)
output Ignition
+ – Operation B
switch
signal (–) Output D
SKIB7379E
E
Communication Input/ F
signal (+) Output
SKIB7378E G
14 — Shield — — — —
H
AV
AV-53
A/C and AV Switch Self-Diagnosis Function BKS0022A
switches.
SKIB1188E
DIAGNOSIS FUNCTION
NOTE:
AV-54
On Board Self-Diagnosis Function BKS00228
DESCRIPTION A
When performing self-diagnosis mode, the following menu is displayed.
DIAGNOSIS ITEM B
Function
Diagnosis item Description
switch
FULL BLINK 1 All display unit segments turn ON. C
HVAC DIAG 2 Self-diagnosis of air conditioner system is performed.
VERSION 3 Software version of each unit is displayed.
D
DIAG END 4 Exit from self-diagnosis mode and return to normal screen.
Self-Diagnosis Mode BKS00229
OPERATION PROCEDURES E
1. Start the engine.
2. Turn the audio system OFF.
3. While pressing the “MUTE” button, turn the volume control dial F
clockwise or counterclockwise for 30 clicks or more. (When the
self-diagnosis mode is started, a short beep will be heard.)
G
I
SKIB0828E
4. Initial diagnosis screen is displayed.

● Perform diagnosis according to the audio preset No. “1, 2, 3, J
4”.
AV
SKIA7023J
M
FULL BLINK
All display unit segments turn ON.
SKIA7024J
AV-55
HVAC DIAG
Self-diagnosis of air conditioner system is performed. Refer to ATC-
46, "Self-diagnosis Function" .
SKIA7025J
VERSION
Software version of display unit, A/C and AV switch, and audio unit
are displayed.
SKIA7026J
DIAG END
Exit from self-diagnosis mode and return to normal screen.
Turn ignition switch OFF or press audio preset No. “4”.
AV-56
Symptom Chart BKS0022B
A
Symptom Check item
● Display unit power supply and ground circuit
All images are not displayed.
● Display unit B
Screen does not switch to nighttime mode after the ● Display unit Illumination signal circuit
lighting switch is turned ON. ● Display unit
● Display unit ignition signal circuit C
TRIP and FUEL ECON screen do not appear.
● Display unit
● Trip odometer (DIST) indication is malfunction- ● Vehicle speed signal circuit between unified meter and A/C amp. and display
unit
D
ing.
● Average vehicle speed (AVG) indication is mal- ● Display unit
functioning. ● Unified meter and A/C amp.
E
● Vehicle speed signal circuit between unified meter and A/C amp. and display
unit
● CAN communication signal circuit
F
NOTE:
Diagnosis Procedure
Average fuel consumption (AVG) indication is mal- Connect CONSULT-II. Select “METER A/C AMP”, and then, select “SELF-
functioning. DIAG RESULTS”. Check that “CAN COMM CIRC [U1000]” is indicated as the G
diagnosis result. The communication with the unified meter and A/C amp. is
normal if not indicated. Repair the root cause if indicated. Refer to DI-32, "DTC
[U1000] CAN Communication Circuit" .
H
● Display unit
● Unified meter and A/C amp.
● CAN communication signal circuit I
NOTE:
Diagnosis Procedure
Connect CONSULT-II. Select “METER A/C AMP”, and then, select “SELF-
J
Distance to empty (DTE) indication is malfunction- DIAG RESULTS”. Check that “CAN COMM CIRC [U1000]” is indicated as the
ing. diagnosis result. The communication with the unified meter and A/C amp. is
normal if not indicated. Repair the root cause if indicated. Refer to DI-32, "DTC
[U1000] CAN Communication Circuit" . AV
● Display unit
● Unified meter and A/C amp.
Unable to operate system with A/C and AV switch. Refer to AV-58, "Unable to Operate System with A/C and AV Switch" L
AV-57
Unable to Operate System with A/C and AV Switch BKS0022J
1. CHECK CONDITION
1. Turn ignition switch ON.
2. Check if an image is displayed on the screen.
Is an image displayed on the screen?
YES >> GO TO 2.
NO >> Repair malfunctioning part. Refer to AV-57, "Symptom Chart" .
2. SELF-DIAGNOSIS OF A/C AND AV SWITCH

Start self-diagnosis of A/C and AV switch, and check the self-diagnosis result. Refer to AV-54, "A/C and AV
Switch Self-Diagnosis Function" .
OK or NG
OK >> GO TO 4.
NG >> GO TO 3.
3. CHECK A/C AND AV SWITCH POWER SUPPLY AND GROUND CIRCUIT

1. Check voltage between A/C and AV switch harness connector
terminal and ground.
Terminals
(+) OFF ACC ON
(–)
Connector Terminal
Battery Battery
M40 7 Ground 0V
voltage voltage

3. Disconnect A/C and AV switch connector. SKIB8804E
4. Check continuity between A/C and AV switch harness connector

M40 terminal 13 and ground.
13 – Ground : Continuity should exist.
OK or NG
OK >> Replace A/C and AV switch.
NG >> Repair harness or connector.
SKIB8805E
AV-58
4. CHECK HARNESS A
2. Disconnect display unit and A/C and AV switch connectors.
3. Check continuity between display unit harness connector (A) B
M47 terminals 11, 13 and A/C and AV switch harness connector
(B) M40 terminals 12, 11.
C
11 – 12 : Continuity should exist.
4. Check continuity between display unit harness connector (A) D
M47 terminals 11, 13 and ground.
11, 13 – Ground : Continuity should not exist.
E
OK or NG SKIB8806E
OK >> GO TO 5.
F
5. CHECK A/C AND AV SWITCH AND DISPLAY UNIT
1. Replace A/C and AV switch or display unit. G
2. Make sure system can be operated by A/C and AV switch.
OK or NG
OK >> INSPECTION END H
NG >> Replace the other unit.
AV
AV-59
Removal and Installation of Display Unit BKS0022K
REMOVAL
1. Remove cluster lid D. Refer to IP-10, "INSTRUMENT PANEL ASSEMBLY" .
2. Remove screws (4), and remove display unit.
SKIA6307E
3. Remove screws (4) and nylon washers (4), and then remove
display finisher.
4. Remove screws (4), and remove bracket.
SKIA6779E
INSTALLATION
Removal and Installation of A/C and AV Switch BKS0022L
REMOVAL
Remove A/C and AV switch integral with audio unit. Refer to AV-15, "Removal and Installation of Audio Unit" .
INSTALLATION
AV-60
INTEGRATED COLOR DISPLAY SYSTEM
INTEGRATED COLOR DISPLAY SYSTEM PFP:28090

A
System Description BKS0027J

INTEGRATED COLOR DISPLAY SYSTEM B
● Each control unit that comprises the system is connected with a communication circuit. It transmits/
receives data signals including request signals and response signals, and controls the system.
C
● The display control unit transmits/receives data signals to/from each control unit with CAN communica-
tion. It performs an arithmetical operation on fuel information values by using data obtained from the con-
trol units, and then displays the calculated values on the screen.
● The display control unit receives vehicle speed signals that are transmitted from the unified meter and A/ D
C amp., performs an arithmetical operation on drive information values, and then displays the calculated
values on the screen.
● The images displayed on the monitor screen contain display control unit-generated RGB images, and rear E
view images transmitted from the rear view camera control unit.
● The display control unit controls image switching and image quality adjustments by communications with
the display. F
REAR VIEW MONITOR
● A rear view monitor was set to vehicle, which can check rearward on screen when backing up the vehicle.
G
● For easier recognition of the vehicle width and the distance to the objects, the guide lines of distances and
rear are combined with the rear view image.
● Image quality of the rear view image and of the RGB image can be adjusted separately.
H
AV
SKIB8807E
AV-61
Component Description BKS0027K
DISPLAY CONTROL UNIT

● Display control unit draws a status of the audio system and air
conditioner system, a TRIP screen, a FUEL ECONOMY screen,
etc., and transmits the image signals to the display screen.
● It receives operation signals of audio system and air conditioner
system from A/C and AV switch, and transmits the operation sig-
nal of audio system to the audio unit through the communication
line and transmits the operation signal of air conditioner system
to the unified meter and A/C amp. through CAN communication.
● Display signal from audio unit is transmitted to display control
unit through the communication line, and then the operating
state of the audio system is displayed in the screen. SKIB0800E
● Display signal from unified meter and A/C amp. is transmitted to

display control unit through the CAN communication, and then the operating state of the air conditioner
system is displayed in the screen.
DISPLAY
● Images on the display include RGB image and rear view image
displayed when setting the select lever to R range.
● Display control unit controls images on the display.
SKIB8808E
A/C AND AV SWITCH

● A/C and AV switch, an integrated combination of audio system
and air conditioner system switches, are adopted.
● Operation signal of audio system is transmitted to the audio unit
through display control unit with the communication line.
● Operation signal of air conditioner system is transmitted to uni-
fied meter and A/C amp. through display control unit with CAN
communication.
SKIB8808E
REAR VIEW CAMERA

● Rear view camera transmits rear view image signals to the dis-
play screen through the rear view camera control unit, when
reverse signal is input.
● The rear view image is a mirror image reversed left and right
that is the same as seeing rear side with a room mirror.
SKIB0802E
AV-62
REAR VIEW CAMERA CONTROL UNIT

● Rear view camera control unit supplies power to the rear view A
camera, and then transmits the rear view image from the rear
view camera to the display screen when reverse signal is input.
● Guiding lines of vehicle width and distance from rear end are B
composited and displayed on rear view image.
SKIB0803E
D
CAN Communication Unit BKS0027L
Refer to LAN-49, "CAN System Specification Chart" . E
Component Parts Location BKS0027M
AV
SKIB8809E
AV-63
Schematic — INF/D — BKS0027N
TKWM4671E
AV-64
Wiring Diagram — INF/D — BKS0027O
AV
TKWM4672E
AV-65
TKWM4673E
AV-66
AV
TKWM4674E
AV-67
TKWM4675E
AV-68
AV
TKWM4676E
AV-69
TKWM4677E
AV-70
AV
TKWM4678E
AV-71
Schematic — COMM — BKS0027P
TKWM4681E
AV-72
Wiring Diagram — COMM — BKS0027Q
AV
TKWM1720E
AV-73
TKWM4682E
AV-74
AV
TKWM4683E
AV-75
TKWM4684E
AV-76
Terminals and Reference Value for Display Control Unit BKS0027R
A
Terminal
Signal Condition
(Wire color)
output Ignition
+ – Operation B
switch
Power supply C
2 (L/B) Ground Output ON — Approx. 9 V
(Inverter)
4 (L/Y) Ground Power supply (Signal) Output ON — Approx. 9 V D
5 (P) Ground Ground (Inverter) — ON — Approx. 0 V
Selector lever in R position Approx. 12 V
6 (G/W) Ground Reverse signal Input ON E
Selector lever except in R
Approx. 0 V
position
7 (R/W) Ground Ground (Signal) — ON — Approx. 0 V
F
Connected to rear view
camera control unit connec- Approx. 0 V
Camera-connection tor
8 (BR/W) Ground Input ON
recognition signal Not connected to rear view G
camera control unit connec- Approx. 5 V
tor
10 (V) Ground ACC power supply Input ACC — Battery voltage H
12 (G) Ground Ignition signal Input ON — Battery voltage
Lighting switch ON Approx. 12 V
14 (R/L) Ground Illumination signal Input ON I
Lighting switch OFF Approx. 0 V
NOTE:
Maximum voltage may be 5 V
due to specifications (connected J
units).
Vehicle speed signal When vehicle speed is

16 (V/W) Ground Input ON AV
(8-pulse) approx. 40 km/h (25 MPH)
L
PKIA1935E
25 (L) — CAN-H — — — —
M
26 (P) — CAN-L — — — —
signal (+) Output
SKIB7378E
29 — Shield — — — —
signal (–) Output
SKIB7379E
AV-77
Terminal
Signal Condition
(Wire color)
output Ignition
+ – Operation
switch
Communication signal
36 (BR) Ground Output ON —
(DCU-DSP)
SKIB3607E
37 — Shield — — — —
38 (Y) Ground Input ON —
(DSP-DCU)
SKIB3606E
39 — Shield — — — —

40 (G) Ground Output ON
(DCU-AUD) switch
SKIB3607E

42 (Y) Ground Input ON
(AUD-DCU) switch
SKIB3606E
47 (W) Ground Ground (RGB) — ON — Approx. 0 V

49 — Shield — — — —
Start DCU Confirmation

mode, and then display
color bar by selecting “Dis-
50 (R) 47 (W) RGB signal (R: red) Output ON
play Color Spectrum Bar”
on Display Diagnosis
screen
SKIB7769E
When displaying RGB

Approx. 5 V
image
51 (G) Ground RGB area (YS) signal Output ON
When displaying rear view
Approx. 0 V
image

52 (B) 47 (W) RGB signal (G: green) Output ON
screen
SKIB7770E
AV-78
Terminal
Signal Condition
(Wire color) A
output Ignition
+ – Operation
switch
B
Vertical
53 (W) Ground synchronizing (VP) Input ON — C
signal
SKIB3598E
D

color bar by selecting “Dis- E
54 (G) 47 (W) RGB signal (B: blue) Output ON
screen
SKIB7771E
F
G
Horizontal
55 (B) Ground synchronizing (HP) Input ON —
signal
H
SKIB3601E
RGB synchronizing When displaying RGB

56 (R) Ground Output ON
signal image
J
SKIB3603E
AV
AV-79
Terminals and Reference Value for Display BKS0027S
Terminal
Signal Condition
(Wire color)
output Ignition
+ – Operation
switch
Power supply
2 (L/B) Ground Input ON — Approx. 9 V
(Inverter)
3 (L/Y) Ground Power supply (Signal) Input ON — Approx. 9 V
4 — Shield — — — —

6 (B) Ground RGB signal (G: green) Input ON
screen
SKIB7770E
7 (W) Ground Ground (RGB) — ON — Approx. 0 V
Horizontal
8 (B) Ground synchronizing (HP) Output ON —
signal
SKIB3601E
When displaying RGB

Approx. 5 V
image
9 (G) Ground RGB area (YS) signal Input ON
When displaying rear view
Approx. 0 V
image
11 (BR) Ground Input ON —
(DCU-DSP)
SKIB3607E
13 (P) Ground Ground (Inverter) — ON — Approx. 0 V

14 (R/W) Ground Ground (Signal) — ON — Approx. 0 V
Set the selector lever in R

Rear view image
15 (W) Ground Input ON position, and then display
signal
the rear view image
SKIB3608E

17 (R) Ground RGB signal (R: red) Input ON
screen
SKIB7769E
AV-80
Terminal
Signal Condition
(Wire color) A
output Ignition
+ – Operation
switch
B
18 (G) Ground RGB signal (B: blue) Input ON
play Color Spectrum Bar” C
screen
SKIB7771E
D
RGB synchronizing When displaying RGB E

19 (R) Ground Input ON
signal image
SKIB3603E
F
G
Vertical
20 (W) Ground synchronizing (VP) Output ON —
signal
H
SKIB3598E
21 — Shield — — — —
I
Communication signal J
22 (Y) Ground Output ON —
(DSP-DCU)
SKIB3606E AV
23 — Shield — — — —
AV-81
Terminals and Reference Value for A/C and AV Switch BKS0027T
Terminal
Signal Condition
(Wire color)
output Ignition
+ – Operation
switch
Press and hold MODE
Approx. 0 V
switch
Press and hold SEEK
1 (G/B) 3 (B/W) Input ON DOWN switch
A
Press and hold VOL DOWN
Approx. 3.3 V
switch
Press and hold POWER
Approx. 0 V
switch
Press and hold SEEK UP
2 (R) 3 (B/W) Input ON switch
B
Press and hold VOL UP
Approx. 3.3 V
switch
Remote control
3 (B/W) Ground — ON — Approx. 0 V
ground
signal (–) Output
SKIB7379E
signal (+) Output
SKIB7378E

14 — Shield — — — —
AV-82
Terminals and Reference Value for Rear View Camera Control Unit BKS0027U
A
Terminal
Signal Condition
(Wire color)
output Ignition
+ – Operation B
switch
2 (V) Ground ACC power supply Input ACC — Battery voltage C
Selector lever in R position Approx. 12 V
4 (G/W) Ground Reverse signal Input ON Other than selector lever in D
Approx. 0 V
R position
Camera-connection
5 (BR/W) Ground Output ON — Approx. 0 V
recognition signal E
Data transmit/receive
6 (O) — — — — —
signal
Set the selector lever in R F
8 (P) Ground Camera power supply Output ON position, and then display Approx. 6 V
the rear view image
9 — Shield — — — — G
Set the selector lever in R H

Rear view image
10 (W) Ground Input ON position, and then display
signal
the rear view image
I
SKIB3608E
11 — Shield — — — —
J
Set the selector lever in R

Rear view image
12 (BR) Ground Output ON position, and then display
signal AV
the rear view image
SKIB3608E
L
AV-83
Special Note for Trouble Diagnosis BKS0027V
Prior to performing trouble diagnosis, make sure there are no corresponding description in the “Example of
Symptoms Possible No Malfunction”. Refer to AV-111, "Example of Symptoms Possible No Malfunction" .
A/C and AV Switch Self-Diagnosis Function BKS00280
switches.
SKIB1188E
DIAGNOSIS FUNCTION
● Continuity of the switches by sounding the buzzer when pressing the rear audio control switch.
NOTE:
AV-84
On Board Self-Diagnosis Function BKS0027W
DESCRIPTION A
● Trouble diagnosis function of system has a self-diagnosis mode by automatic operation and a confirma-
tion mode by manual operation.
● Self-diagnosis mode checks for connections between the units constituting this system, analyzes each B
individual unit at the same time, and displays the results on the display.
● Confirmation mode displays trouble diagnosis that require an operation and a judgment by a human
(auto-decision cannot be performed by the system), and an error history of system. C
DIAGNOSIS ITEM
Mode Description D
● Display control unit diagnosis
DCU Failure Diagnosis ● Analyzes connection between the display control unit and each unit, and operation of
each unit. E
Color tone and shading of the display control unit-generated image can be checked by
Display Diagnosis
the display of a color bar and a gray scale.
Diagnosis of signals that are input to display control unit can be performed for speed sig- F
Vehicle Signal
DCU nal, Light, IGN and Reverse.
DCU Malfunctions that occurred in the past are displayed, along with the number of times each
Confirmation History of Error
has occurred. G
Software Version Software version of each unit is displayed.
HVAC Self-diagnosis of air conditioner system is performed.
H
CAN Diagnosis The transmitting/receiving of CAN communication can be monitored.
AV
AV-85
OPERATION PROCEDURE
1. Start the engine.
2. Turn the audio system OFF.
3. While pressing the “MUTE” button, turn the volume control dial
clockwise or counterclockwise for 30 clicks or more. (When the
self-diagnosis mode is started, a short beep will be heard.)
SKIB8825E
4. The initial diagnosis screen is displayed.
SKIB0829E
5. The item of “DCU Failure Diagnosis” and “DCU Confirmation”

can be selected.
● Select each item with “FM” button and “AM” button of A/C and
AV switch, and then determine by “CD·CHG” button.
● When pressing “3 RANDOM” button of A/C and AV switch,
return to the previous screen.
SKIB1985E
AV-86
Self-Diagnosis Mode BKS0027X
DIAGNOSIS PROCEDURE A
1. Select “DCU Failure Diagnosis”.
● Self-diagnosis screen is displayed, and then self-diagnosis
starts. B
● The bar graph visible below self-diagnosis screen displays
progress of the diagnosis.
C
D
SKIB0830E
2. When exiting self-diagnosis, a confirmation screen for unit con- E

nection may be displayed.
● When judging an optional device as an abnormal connection,
a confirmation screen is displayed to check if the applicable F
device is actually equipped. When it is equipped, a screen for
diagnosis results is displayed by selecting the device name
and by selecting “Finish”. (Unequipped units can also be dis-
played by option.) G
● When optional device is connected normally, the switch of the
device name is not displayed.
SKIB0831E H
3. On the diagnosis results screen, each unit name and connection

line will be colored according to the diagnosis result, as follows.
I
Green : No malfunctioning.
Red : Unit is malfunctioning.
Gray : Diagnosis has not been done. J
Yellow : Cannot be judged by self-diagnosis results.
NOTE:
AV
● DCU = Display control unit
● SW = A/C and AV switch SKIB8826E
● If multiple malfunctions occur at the same time for a single

L
unit, the screen switch colors are determined according to the following order of priority: red > yellow >
gray.
● Screen when it is normal
M
– Between DCU and SW is connected in a gray.
– Between DCU and DISPLAY, DCU and AUDIO, AUDIO and CD-CHG are connected in green.
4. Select a switch on the diagnosis results screen, and comments

for the diagnosis results will be shown.
SKIB0833E
AV-87
SELF-DIAGNOSIS RESULT
Check the applicable display in the following table, and then repair the malfunctioning parts.
Quick Reference Table
Self-diagnosis result screen Possible cause Action to take
Display control unit malfunction is

Replace display control unit.
detected.
SKIB8827E
1. Check communication circuit between

display control unit and display.
2. Check communication signal between
Malfunction is detected on communi-
cation signal between display control 3. If the results from the above checkup
unit and display. show no malfunction, replace either
display control unit or display, and then
start self-diagnosis.
4. If self-diagnosis results still show any
malfunction, replace the other unit.
SKIB8828E
1. Check audio unit power supply circuit.

display control unit and audio unit.
● Audio unit power supply circuit mal- 3. Check communication signal between
function is detected. display control unit and audio unit.
● Malfunction is detected on commu- 4. If the results from the above checkup
nication signal between display con- show no malfunction, replace either
trol unit and audio unit. display control unit or audio unit, and
then start self-diagnosis.
SKIB8829E malfunction, replace the other unit.
1. Check CD auto changer power supply
circuit.
audio unit and CD auto changer.
● CD auto changer power supply cir-
cuit malfunction is detected. 3. Check communication signal between
audio unit and CD auto changer.
● Malfunction is detected on commu-
nication signal between audio unit 4. If the results from the above checkup
and CD auto changer. show no malfunction, replace either
audio unit or CD auto changer, and
SKIB8830E
AV-88
Confirmation Mode BKS0027Y
DIAGNOSIS PROCEDURE A
1. Select “DCU Confirmation”.
● Each diagnosis is shown by selecting each screen switch on
DCU Confirmation screen. B
D
SKIB0834E
DCU E
Display Diagnosis
Color tone and shading of the display control unit-generated image can be checked by the display of a color
bar and a gray scale. F
AV
SKIB8899E L
● If RGB signal is malfunctioning, the tint of the color bar display is as follows.
R (red) signal error : Light blue (Cyan) tint
M
G (green) signal error : Purple (Magenta) tint
B (blue) signal error : Yellow tint
AV-89
Vehicle Signal
A comparison check can be made of each actual vehicle signal and
the signals recognized by the display control unit.
SKIB0835E
Diagnosis item Display Condition Remarks

ON When vehicle speed is more than 0 km/h (0 MPH)
Changes in indication may be delayed.
Speed Signal OFF When vehicle speed is 0 km/h (0 MPH)
This is normal.
— Ignition switch in ACC position
ON Lighting switch ON
Light —
OFF Lighting switch OFF
ON Ignition switch ON
IGN —
OFF Ignition switch ACC position
ON Selector lever in R position
Changes in indication may be delayed.
Reverse OFF Selector lever in any position other than R position
This is normal.
— Ignition switch in ACC position
History of Error
Diagnosis results of self-diagnosis depend on if any error occurred
during the time after selecting “DCU Failure Diagnosis” until self-
diagnosis results is displayed.
Meanwhile, when an error occurs before selecting “DCU Failure
Diagnosis”, and if an error does not occur until self-diagnosis results
is displayed, a diagnosis result is judged as normal.
Consequently, a diagnosis needs to be performed with “History of
Error” for the past error that is not available with self-diagnosis.
“History of Error” stores error occurrences up to 50, and errors after
the 51st are displayed as the 50th.
SKIB8900E
AV-90
Diagnosis by History of Error

When having a difficulty on the investigation of cause due to multiple errors with a reproducible malfunction, A
turn ON the ignition switch from OFF mode after making a memo of the item and number of time (or delete
“History of Error”). Check “History of Error” again after the malfunction was reproduced, and then perform
diagnosis focusing on the item of which number of time increased. B
Error item Possible cause Action to take
Display control unit malfunction is
DCU malfunction Replace display control unit.
detected. C
1. Delete the “History of Error”, and turn
OFF ignition switch.
2. Turn ON ignition switch, and make sure D
of the “History of Error”.
3. If the error item listed left is displayed
again, GO TO 4. If the error item is not E
displayed, end the diagnosis. (This is
not a malfunction.)
● Display power supply and ground
4. Check display power supply and
circuit malfunction is detected. F
ground circuit.
Display Connect Error ● Malfunction is detected on commu-
nication signal between display con-
trol unit and display.
6. Check communication signal between G
7. If the results from the above checkup
show no malfunction, replace either H
display control unit or display, and then
start self-diagnosis.
8. If self-diagnosis results still show any I
AV
AV-91
Error item Possible cause Action to take

1. Start self-diagnosis, and make sure of
the result.
2. If any error is found, GO TO 3. If any
error is not found, delete the “History of
Error” and end the diagnosis. (This is
not a malfunction.)
● Audio unit power supply circuit mal- 3. Check audio unit power supply circuit.
function is detected. 4. Check communication circuit between
Audio Connect Error ● Malfunction is detected on commu- display control unit and audio unit.
nication signal between display con- 5. Check communication signal between
trol unit and audio unit. display control unit and audio unit.
show no malfunction, replace either
display control unit or audio unit, and
1. Delete the “History of Error”, and turn
OFF ignition switch.
2. Turn ON ignition switch, and make sure
of the “History of Error”.
3. If the error item listed left is displayed
again, GO TO 4. If the error item is not
displayed, end the diagnosis. (This is
● A/C and AV switch power supply not a malfunction.)
and ground circuit malfunction is
detected. 4. Check A/C and AV switch power supply
SW Error and ground circuit.
● Malfunction is detected on commu-
nication signal between display con- 5. Check communication circuit between
trol unit and A/C and AV switch. display control unit and A/C and AV
switch.
show no malfunction, replace either
display control unit or A/C and AV
switch, and then start self-diagnosis.
Software Version
Software version of each unit is displayed.
HVAC
Self-diagnosis of air conditioner system is performed. Refer to ATC-46, "Self-diagnosis Function" .
AV-92
CAN DIAGNOSIS
The transmitting/receiving of CAN communication can be monitored. A
Item Content Error counter

Communication OK / NG 0 - 50 B
CAN System 1 OK / UNKNW 0 - 50
C
CAN System 5 OK / UNKNW 0 - 50 D
PKIC9893E
CAN System 8 OK / UNKNW 0 - 50 E
AV
AV-93
CONSULT-II Functions (REAR VIEW CAMERA) BKS00281
CONSULT-II can display each diagnosis item using the diagnosis test modes shown following.
Check Item,
Diagnosis part Description
Diagnosis Mode
WORK SUPPORT It can adjust the vehicle width and distance guiding lines that overlap camera image.
REAR VIEW CAMERA DATA MONITOR Displays input data for rear view camera control unit in real-time.
ECU PART NUMBER Displays rear view camera control unit part number.
CONSULT-II BASIC OPERATION PROCEDURE

Refer to GI-34, "CONSULT-II Start Procedure" .
WORK SUPPORT
Operation Procedure
1. Touch “WORK SUPPORT” on “SELECT DIAG MODE” screen.
2. Touch “SELECT GUIDELINE PATTERN” or “ADJ GUIDELINE POSITION” on “SELECT WORK ITEM”
screen.
Item Description
SELECT GUIDELINE PATTERN The opening of the vehicle width and distance guiding lines can be selected from 2 patterns.
ADJ GUIDELINE POSITION Make fine adjustment to the vehicle width and distance guiding lines upper/lower/left/right
For details, refer to AV-95, "Vehicle Width and Distance Guiding Line Correction" .
DATA MONITOR
Operation Procedure
1. Touch “DATA MONITOR” on “SELECT DIAG MODE” screen.
2. Touch either “ALL SIGNALS” or “SELECTION FROM MENU” on “SELECT MONITOR ITEM” screen.
Item Description
ALL SIGNALS Monitors all the signal.
SELECTION FROM MENU Selects and monitors individual items.
3. When “SELECTION FROM MENU” is selected, touch individual items to be monitored. When “ALL SIG-
NALS” is selected, all the items will be monitored.
4. Touch “START”.
5. Touch “RECORD” while monitoring, then the status of the monitored item can be recorded. To stop
recording, touch “STOP”.
Display Item List
Item Description
“ON (Selector lever R position)/OFF (other than R position)” status as judged from the reverse
R POSI SIG [ON/OFF]
signal is displayed.
AV-94
Vehicle Width and Distance Guiding Line Correction BKS00282
DESCRIPTION A
CONSULT-II is used to modify the guiding lines of the width of vehicle and the distance from rear end of vehi-
cle on the rear view monitor when these lines are derated from the actual width and/or distance, because of
rear view camera replacement, etc. B
VEHICLE WIDTH AND DISTANCE GUIDING LINE CORRECTION PROCEDURE
1. Create a correction line to modify the guiding lines inside moni-
tors. Draw lines on the rearward area of the vehicle passing C
through the following points: 250 mm (9.84 in) from both sides of
the vehicle, and 0.5 m (1.64 ft), 1 m (3.28 ft), 2 m (6.56 ft), and 3
m (9.84 ft) from the rear end of the bumper. D
I
SKIB4106E
2. Connect CONSULT-II and CONSULT-II CONVERTER, and then

J
touch “REARVIEW CAMERA” on “SELECT SYSTEM” screen.
WARNING:
Correct the guiding line with the engine stopped for safety.
AV
BCIA0030E
M
3. Shift selector lever to R position.
SKIA6103E
AV-95
4. Touch “ADJ GUIDELINE POSITION” on “SELECT WORK

ITEM” screen.
NOTE:
When starting “ADJ GUIDELINE POSITION” mode, vehicle
width guiding lines may move horizontally. It is normal.
SKIA5638E
5. Touch “X UP”, “X DOWN”, “Y UP”, and “Y DOWN” so as to align

with a correction line created, and then adjust the guiding lines.
Adjustment direction ADJUST MONITOR
LEFT/RIGHT X VALUE ADJ –8 - 8
UP/DOWN Y VALUE ADJ –8 - 8
6. If the guiding lines align with the correction lines, touch “SAVE”
so as to fix the lines, and then end the correction by touching
“END”. GO TO 7 if the guiding lines do not align with the correc-
tion lines.
SKIB0841E
7. Touch “SELECT GUIDELINE PATTERN” on SELECT WORK

ITEM screen.
SKIA5638E
8. Change the pattern of the guiding lines by touching “UP” or

“DOWN”. [Select from among 2 patterns (“PATTERN NO. 0 or
1”) of the guiding lines.]
9. Fix the pattern of the guiding lines by touching “SAVE”.
10. End the correction by touching “END”.
NOTE:
If the setting value is changed on “SELECT GUIDELINE PAT-
TERN” and “ADJ GUIDELINE POSITION”, the change is not
reflected at the next starting if “SAVE” is not touched.
SKIB0842E
AV-96
Unable to Operate System with A/C and AV Switch BKS00284
A
Symptom: Unable to operate A/C system and audio system with A/C and AV switch. (Unable to start self-diag-
nosis.)
1. CHECK CONDITION B
2. Check if an image is displayed on the screen.
C
Is an image displayed on the screen?
YES >> GO TO 2.
NO >> Repair malfunctioning part. Refer to AV-99, "All Images Are Not Displayed" .
D
2. SELF-DIAGNOSIS OF A/C AND AV SWITCH
Start self-diagnosis of A/C and AV switch, and check the self-diagnosis result. Refer to AV-84, "A/C and AV E
Switch Self-Diagnosis Function" .
OK or NG
OK >> GO TO 4. F
NG >> GO TO 3.
3. CHECK A/C AND AV SWITCH POWER SUPPLY AND GROUND CIRCUIT G

1. Check voltage between A/C and AV switch harness connector
terminal and ground.
H
Terminals
(+) OFF ACC ON
(–)
Connector Terminal I
Battery Battery
M40 7 Ground 0V
voltage voltage
2. Turn ignition switch OFF. J

3. Disconnect A/C and AV switch connector. SKIB8804E
4. Check continuity between A/C and AV switch harness connector

M40 terminal 13 and ground. AV

OK or NG L
OK >> Replace A/C and AV switch.
M
SKIB8805E
AV-97
4. CHECK HARNESS
2. Disconnect display control unit and A/C and AV switch connectors.
3. Check continuity between display control unit harness connector
(A) M83 terminals 28, 30 and A/C and AV switch harness con-
nector (B) M40 terminals 12, 11.
(A) M83 terminals 28, 30 and ground.
OK or NG SKIB8837E
OK >> GO TO 5.
5. CHECK A/C AND AV SWITCH AND DISPLAY CONTROL UNIT

1. Replace A/C and AV switch or display control unit.
2. Make sure that A/C system and audio system can be operated by A/C and AV switch.
OK or NG
OK >> INSPECTION END
NG >> Replace the other unit.
AV-98
All Images Are Not Displayed BKS00285
A
Symptom: RGB image and rear view image are not displayed.
1. CHECK CONDITION
B
When operating audio and air conditioner, make sure that they operate correctly.
Do audio and air conditioner operate normally?
YES >> GO TO 2.
C
NO >> GO TO 5.
2. CHECK DISPLAY GROUND CIRCUIT

D
2. Disconnect display connector.
3. Check continuity between display harness connector M81 termi- E
nal 1 and ground.
F
OK or NG
OK >> GO TO 3.
NG >> Repair harness or connector. G
SKIB7839E H
3. CHECK HARNESS
I
1. Disconnect display control unit connector.
(A) M82 terminals 2, 4, 5, 7 and display harness connector (B)
M81 terminals 2, 3, 13, 14. J
2–2 : Continuity should exist.

4–3 : Continuity should exist. AV
L
(A) M82 terminals 2, 4 and ground. SKIB7840E
2, 4 – Ground : Continuity should not exist. M

OK or NG
OK >> GO TO 4.
AV-99
4. CHECK DISPLAY POWER SUPPLY AND GROUND CIRCUIT (INVERTER AND SIGNAL)
1. Connect display control unit and display connectors.

3. Check voltage between display control unit harness connector
M82 terminals 2 and 5.
2–5 : Approx. 9 V
SKIB7841E

M82 terminals 4 and 7.
4–7 : Approx. 9 V
OK or NG
OK >> Replace display.
NG >> Replace display control unit.
SKIB7842E
5. CHECK DISPLAY CONTROL UNIT POWER SUPPLY AND GROUND CIRCUIT

terminals and ground.
Terminals
(+) OFF ACC ON
(–)
Connector Terminal
Battery Battery Battery
1
voltage voltage voltage
M82 Ground
Battery Battery
10 0V
voltage voltage
SKIB7843E
3. Disconnect display control unit connector.
M82 terminal 3 and ground.
OK or NG
OK >> Replace display control unit.
SKIB7844E
AV-100
Rear View Image Is Not Displayed (RGB Image Is Displayed) BKS00286
A
Symptom: Rear view image is not displayed when selector lever is set in R position. (RGB image is displayed.)
1. CHECK CONDITION
B
2. When setting selector lever in R position, make sure that the screen does not change or changes into the
screen where nothing is displayed.
C
Does the screen change into the screen where nothing is displayed?
YES >> GO TO 2.
NO >> GO TO 12.
D
2. CONSULT-II FUNCTIONS
1. Connect “CONSULT-II”. Refer to AV-94, "CONSULT-II BASIC OPERATION PROCEDURE" . E
2. Check if “REARVIEW CAMERA” is shown on the SELECT SYSTEM screen.
Is “REARVIEW CAMERA” shown?
YES >> GO TO 3. F
NO >> Check rear view camera control unit power supply and ground circuit, and repair malfunctioning
part.
G
3. CONSULT-II FUNCTIONS
Check if reverse signals input to the rear view camera control unit are normal with DATA MONITOR. Refer to
AV-94, "DATA MONITOR" . H
OK or NG
OK >> GO TO 4.
NG >> Check rear view camera control unit reverse signal circuit, and repair malfunctioning part. I
4. CHECK HARNESS
J
2. Disconnect rear view camera control unit and rear view camera connectors.
3. Check continuity between rear view camera control unit harness AV
connector (A) B36 terminals 8, 10 and rear view camera har-
ness connector (B) T32 terminals 1, 3.
8–1 : Continuity should exist. L
4. Check continuity between rear view camera control unit harness
connector (A) B36 terminals 8, 10 and ground. M

OK or NG SKIB8838E
OK >> GO TO 5.
AV-101
5. CHECK REAR VIEW CAMERA GROUND CIRCUIT

Check continuity between rear view camera harness connector T32
terminal 2 and ground.
OK or NG
OK >> GO TO 6.
SKIB8839E
6. CHECK REAR VIEW CAMERA POWER SUPPLY CIRCUIT

1. Connect rear view camera control unit and rear view camera connectors.
3. When displaying rear view image, check voltage between rear
view camera control unit harness connector B36 terminal 8 and
ground.
8 – Ground : Approx. 6 V
OK or NG
OK >> GO TO 7.
NG >> Replace rear view camera control unit.
SKIB6987E
7. CHECK REAR VIEW IMAGE SIGNAL

When displaying rear view image, check voltage waveform between
rear view camera control unit harness connector B36 terminal 10
and ground with CONSULT-ll or oscilloscope.
10 – Ground:
SKIB3608E
SKIB6988E
OK or NG
OK >> GO TO 8.
NG >> Replace rear view camera.
AV-102
8. CHECK HARNESS A
2. Disconnect display and rear view camera control unit connectors.
3. Check continuity between display harness connector (A) M81 B
terminal 15 and rear view camera control unit harness connector
(B) B36 terminal 12.
C
4. Check continuity between display harness connector (A) M81
terminal 15 and ground. D
15 – Ground : Continuity should not exist.
OK or NG
E
OK >> GO TO 9. SKIB7845E
9. CHECK REAR VIEW IMAGE SIGNAL F
1. Connect display and rear view camera control unit connectors.

2. Turn ignition switch ON. G
3. When displaying rear view image, check voltage waveform
between rear view camera control unit harness connector B36
terminal 12 and ground with CONSULT-ll or oscilloscope. H
I
12 – Ground:
J
SKIB3608E
SKIB6990E
OK or NG
OK >> GO TO 10. AV
NG >> Replace rear view camera control unit.
10. CHECK HARNESS L

2. Disconnect display control unit and display connectors.
M
(A) M83 terminal 51 and display harness connector (B) M81 ter-
minal 9.
OK or NG
OK >> GO TO 11.
SKIB7846E
AV-103
11. CHECK RGB AREA (YS) SIGNAL

3. When displaying rear view image, check voltage waveform
between display control unit harness connector M83 terminal 51
and ground with CONSULT-ll or oscilloscope.
51 – Ground
When displaying RGB image : Approx. 5 V
When displaying rear view image : Approx. 0 V
OK or NG
NG >> Replace display control unit. SKIB7847E
12. SELF-DIAGNOSIS
Start self-diagnosis, and check the self-diagnosis result. Refer to AV-87, "Self-Diagnosis Mode" .
OK or NG
OK >> GO TO 13.
NG >> Repair malfunctioning part.
13. CHECK DISPLAY CONTROL UNIT REVERSE SIGNAL

Select “Vehicle Signal” of DCU Confirmation mode, and check the reverse signal inputting to display control
unit. Refer to AV-90, "Vehicle Signal" .
OK or NG
OK >> GO TO 14.
NG >> Check display control unit reverse signal circuit, and repair malfunctioning part.
14. CHECK HARNESS

2. Disconnect rear view camera control unit and display control unit connectors.
3. Check continuity between rear view camera control unit harness
connector (A) B36 terminal 5 and display control unit harness
connector (B) M82 terminal 8.
5–8 : Continuity should exist.
OK or NG
OK >> GO TO 15.
SKIB7848E
AV-104
15. CHECK CAMERA-CONNECTION RECOGNITION SIGNAL A

1. Connect rear view camera control unit and display control unit connectors.
3. Check voltage between rear view camera control unit harness B
connector B36 terminal 5 and ground.
5 – Ground : Approx. 0 V
C
OK or NG
NG >> Replace rear view camera control unit. D
E
SKIB7849E
AV
AV-105
When Displaying Rear View Image, SETTING Menu Is Not Displayed BKS00287
Symptom: Pressing the “SETTING” button when displaying rear view image, SETTING menu is not displayed
or rolls.
1. CHECK HARNESS
(A) M83 terminals 53, 55 and display harness connector (B)
M81 terminals 20, 8.
(A) M83 terminals 53, 55 and ground.
OK or NG SKIB7850E
OK >> GO TO 2.
2. CHECK VERTICAL SYNCHRONIZING (VP) SIGNAL

3. Check voltage waveform between display control unit harness
connector M83 terminal 53 and ground with CONSULT-ll or
oscilloscope.
53 – Ground:
SKIB3598E
SKIB7851E
OK or NG
OK >> GO TO 3.
NG >> Replace display.
3. CHECK HORIZONTAL SYNCHRONIZING (HP) SIGNAL

Check voltage waveform between display control unit harness con-
nector M83 terminal 55 and ground with CONSULT-ll or oscillo-
scope.
55 – Ground:
SKIB3601E
SKIB7852E
OK or NG
NG >> Replace display.
AV-106
Tint Is Strange for The RGB Image BKS00288
A
Symptom: Tint of all RGB images is strange.
1. CHECK HARNESS
B
3. Check the malfunctioning circuit according to the symptoms.
C
● Light blue (Cyan) tinged screen
Check continuity between display control unit harness connector
minal 17. D

Check continuity between display control unit harness connector E
(A) M83 terminal 50 and ground.
F
SKIB7853E
● Purple (Magenta) tinged screen G

minal 6. H
(A) M83 terminal 52 and ground. I
J
SKIB7854E
● Yellow tinged screen

AV
minal 18.
L
M
SKIB7855E
OK or NG
OK >> GO TO 2.
AV-107
2. CHECK RGB SIGNAL

3. Start Confirmation mode. Refer to AV-89, "Confirmation Mode" .
4. Display color bar by selecting “Display Color Spectrum Bar” on Display Diagnosis screen. Refer to AV-89,
"Display Diagnosis" .
5. Check the malfunctioning circuit according to the symptoms.
● Light blue (Cyan) tinged screen
Check voltage waveform between display control unit harness
oscilloscope.
50 – Ground:
SKIB7769E
SKIB7856E
● Purple (Magenta) tinged screen

oscilloscope.
52 – Ground:
SKIB7770E
SKIB7857E
● Yellow tinged screen

oscilloscope.
54 – Ground:
SKIB7771E
SKIB7858E
OK or NG
NG >> Replace display control unit.
AV-108
RGB Image Is Rolling BKS00289
A
Symptom: RGB image is rolling.
1. CHECK HARNESS
B
C
minal 19.
56 – 19 : Continuity should exist. D
E
OK or NG
OK >> GO TO 2. SKIB7863E
F
2. CHECK RGB SYNCHRONIZING SIGNAL G

3. When displaying RGB image, check voltage waveform between H
display control unit harness connector M83 terminal 56 and
ground with CONSULT-ll or oscilloscope.
I
56 – Ground: J
SKIB3603E AV
SKIB7864E
OK or NG
NG >> Replace display control unit. L
AV-109
Values for All Items in The TRIP Screen Do Not Change BKS0028A
Symptom: Values for items, “Elapsed Time”, “Driving Distance” and “Average Speed” in the TRIP screen do
not change.
1. CHECK DISPLAY CONTROL UNIT IGNITION SIGNAL
Select “Vehicle Signal” in Confirmation mode, and check the ignition signal inputting to display control unit.
Refer to AV-90, "Vehicle Signal" .
OK or NG
NG >> Check display control unit ignition signal circuit, and repair malfunctioning part.
Values for Items, “Driving Distance” and “Average Speed” Do Not Change BKS0028B
Symptom: Values for Items, "Driving Distance" and "Average Speed" do not change. (The Value for "Elapsed
Time" Changes.)
1. CHECK DISPLAY CONTROL UNIT VEHICLE SPEED SIGNAL
Select “Vehicle Signal” in Confirmation mode, and check the vehicle speed signal inputting to display control
unit. Refer to AV-90, "Vehicle Signal" .
OK or NG
NG >> Check display control unit vehicle speed signal circuit, and repair malfunctioning part.
Values for All Items in The FUEL ECONOMY Screen Do Not Change BKS0028C
Symptom: Values for items, “Average Fuel Economy” and “Distance to Empty” in the FUEL ECONOMY screen
do not change.
1. CHECK CONDITION
Check if values for all items in the TRIP screen change properly.
OK or NG
OK >> Select “CAN Diagnosis” in Confirmation mode, and check the status of CAN communication.
Refer to AV-93, "CAN DIAGNOSIS" . Repair malfunctioning part after checked the status of CAN
communication. Refer to LAN-49, "CAN System Specification Chart" .
NG >> Repair malfunctioning part. Refer to AV-110, "Values for All Items in The TRIP Screen Do Not
Change" or AV-110, "Values for Items, “Driving Distance” and “Average Speed” Do Not Change" .
AV-110
Example of Symptoms Possible No Malfunction BKS0028D
A
DISPLAY
Symptom Possible cause Possible solution B
The brightness is at the lowest setting. Adjust the brightness of the display.
No image is displayed.
The display is turned off. Turn on the display.
C
The screen is too dim. The move- The temperature in the interior of the vehicle is Wait until the interior of the vehicle has
ment is slow. low. warmed up.
Some pixels in the display are This condition is an inherent characteristic of
This is not a malfunction. D
darker or brighter than others. liquid crystal displays.
Some menu items cannot be Some menu items become unavailable while Park the vehicle in a safe location, then oper-
selected. the vehicle is driven. ate the system.
E
REAR VIEW MONITOR
Symptom Possible cause Possible solution
Rear view monitor image is not F
Selector lever is not set to R position. Shift the selector lever to R position.
shown.
The front glass of the camera lens is dirty. Wipe it with a soft wet cloth lightly.
G
Adherence of raindrops or snow. Wipe it with a soft cloth lightly.
Rear view monitor image is fuzzy.
The lens is illuminated directly by sunlight or light The fuzzy image recovers when the light is
from headlight of cars behind. covered.
H
AV
AV-111
Removal and Installation of A/C and AV Switch BKS0028E
REMOVAL
Remove A/C and AV switch integral with audio unit. Refer to AV-34, "Removal and Installation of Audio Unit" .
INSTALLATION
Removal and Installation of Display BKS0028G
REMOVAL
1. Remove cluster lid D. Refer to IP-10, "INSTRUMENT PANEL ASSEMBLY" .
2. Remove screws (4), and remove display unit.
SKIB8840E
3. Remove screws (4) and nylon washers (4), and then remove
display finisher.
4. Remove screws (4), and remove bracket.
SKIA6779E
INSTALLATION
Removal and Installation of Display Control Unit BKS0028H
REMOVAL
Remove display control unit integral with audio unit. Refer to AV-34, "Removal and Installation of Audio Unit" .
INSTALLATION
AV-112
Removal and Installation of Rear View Camera BKS0028I
REMOVAL A
1. Remove trunk lid finisher (upper). Refer to EI-33, "TRUNK LID FINISHER" .
2. Disconnect connector and remove connector clip.
3. While pressing the rear view camera to left side, pull right side B
pawl of it and remove.
SKIA6281E
E
INSTALLATION
Adjust the vehicle width and distance guiding line referring to AV-95, "Vehicle Width and Distance Guiding Line
F
Correction" if there is a difference after installing rear view camera.
Removal and Installation of Rear View Camera Control Unit BKS0028J
REMOVAL G
1. Remove trunk wheelhouse finisher (Left side). Refer to EI-58, "TRUNK ROOM TRIM & TRUNK LID FIN-
ISHER" .
2. Remove screw and remove rear view camera control unit. H
3. Disconnect connector.
SKIA6282E AV
INSTALLATION
L
AV-113
AV-114

Audio, Visual, Navigation & Telephone Sys-TEM: Section

Uploaded by

Copyright:

Available Formats

Audio, Visual, Navigation & Telephone Sys-TEM: Section

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Audio, Visual, Navigation & Telephone Sys-TEM: Section

Uploaded by

Copyright:

Available Formats

AUDIO, VISUAL, NAVIGATION & TELEPHONE SYSTEM

AUDIO, VISUAL, NAVIGATION & TELEPHONE SYS-

AUDIO (WITH INTEGRATED DISPLAY SYSTEM) PFP:28185

System Description BKS0020H

Component Parts Location BKS0020I

Wiring Diagram — AUDIO — BKS0020K

Terminals and Reference Value for Audio Unit BKS0020L

Audio signal front door

Communication signal Operate audio volume

Communication signal Operate audio volume

Terminals and Reference Value for A/C and AV Switch BKS0020N

13 (B) Ground Ground — ON — Approx. 0 V

Terminals and Reference Value for Display Unit BKS0020O

Refer to AV-52, "Terminals and Reference Value for Display Unit" .

A/C and AV Switch Self-Diagnosis Function BKS0020P

Symptom Chart BKS0020Q

Removal and Installation of Audio Unit BKS0020Z

1. Screw 2. Bracket (LH) 3. A/C and AV switch G

3. Remove screws (4). M

5. Remove screws (2) and remove audio unit with bracket.

6. Remove screws (4) and remove bracket.

Removal and Installation of Rear Door Speaker BKS00212

AUDIO (WITH INTEGRATED COLOR DISPLAY SYSTEM) PFP:28185

System Description BKS0028N

Component Parts Location BKS0028O

Wiring Diagram — AUDIO — BKS0028Q

Terminals and Reference Value for Audio Unit BKS0028R

Audio signal front door

Audio signal front door

Audio signal rear door

Audio signal rear door

Communication signal Operate audio volume

Communication signal Operate audio volume

Play back CD on CD auto

Play back CD on CD auto E

Communication signal When setting to CD auto H

Communication signal When setting to CD auto

Terminals and Reference Value for CD Auto Changer BKS00291

Play back CD on CD auto

Play back CD on CD auto

Communication signal When setting to CD auto

Communication signal When setting to CD auto

Communication signal When setting to CD auto

12 (Y) Ground Battery power supply Input OFF — Battery voltage

Terminals and Reference Value for A/C and AV Switch BKS0028S

13 (B) Ground Ground — ON — Approx. 0 V

Terminals and Reference Value for Display Control Unit BKS0028T

A/C and AV Switch Self-Diagnosis Function BKS0028U

Symptom Chart BKS0028V

Removal and Installation of Audio Unit BKS0028W

1. Display control unit 2. Screws 3. Bracket (LH)

3. Remove screws (4).

4. Remove screws (4) and remove display control unit from

6. Remove screws (2) and remove audio unit with bracket. H

Removal and Installation of Rear Audio Control Switch BKS002CZ

3. Remove screws (4) and remove bracket.

Removal and Installation of Front Door Speaker BKS0028Y

AUDIO ANTENNA PFP:28200

Wiring Diagram — W/ANT — BKS0021U