Augwind’s compressed air tech for

renewables storage
Augwind CEO Or Yogev recently spoke to pv magazine about the Israeli company’s new
storage solution for the renewables sector. The underground compressed-air storage specialist
recently secured 166 MWh of capacity in Israel’s latest solar+storage tender, and plans to take
equity stakes in all five projects.

FEBRUARY 11, 2021 EMILIANO BELLINI

 DISTRIBUTED STORAGE
 GRIDS & INTEGRATION
 MARKETS
 MARKETS & POLICY
 TECHNOLOGY AND R&D
 UTILITY SCALE PV
 UTILITY SCALE STORAGE
 ISRAEL

Augwind says that the system has an efficiency rate of 80%.

Image: Augwind
Share

Augwind, an underground compressed-air storage specialist, was one of the biggest

winners in Israel's latest solar+storage tender, which was finalized in early January. The
Israeli company secured 166 MWh of storage capacity across five solar projects in the
procurement exercise, which saw the authorities assign 608.95 MW of PV capacity to
seven developers across 33 projects.

“We secured 120 MWh and 20 MWh in two fixed 23-year PPA projects submitted by
Israeli developer Solegreen and a further 20 MWh for a solar plant planned by French
energy company EDF,” Augwind CEO Or Yogev told pv magazine. “Furthermore, we
secured 1 MWh and 5 MWh with Israeli companies Yahel and Meyram for behind-the-
meter applications in industrial parks.”

Augwind is now
building this storage project in Israel.
Image: Augwind

Augwind will build the projects at a fixed tariff of ILS 0.1745 ($0.0544)/kWh, which will
ensure their bankability, while providing better investment returns than behind-the-meter
projects relying on lithium-ion storage, Yogev claimed. The company's energy storage
tech will generate recurring revenues based on two factors.

“First, offsetting off-peak to peak electricity consumption and, secondly, providing all
compressed air requirements using 40% more efficient compression cycle,” Yogev
explained.

Compressed air
Yogev said that Augwind's solution is cost-effective for power generators with minimum
capacities of 1 MW and four hours of storage. It relies on a stationary storage technique
that has been in use for years, with a focus on the use of compressed air to optimize the
efficiency of industrial facilities.

“Compressed air can be used to generate power,” he said. “It can also be utilized for the
common compressed air needs of any manufacturing facility.”

Augwind has developed a patented air-compression method that purportedly produces

compressed air at a much higher efficiency level than in standard compressors.

“This core technology is already implemented with the AirSmart system for industrial
energy efficiency applications in over 60 installations in Israel and abroad, including
PepsiCo in California,” Yogev said.

It has already used its AirBattery energy storage systems for short-term and seasonal
electricity storage applications.

“I would define our core technology as an enabler for both high capacity energy storage
and industrial compressed air services,” Yogev said. “Or a hybrid system that is ideal for
each factory in the world that needs a clean, cheap renewable-based power supply and
a more efficient compressed air process.”

Polymer tanks
The main components in Augwind's storage system are AirX inflatable polymer tanks.
The company outsources production of this patented technology to third parties. The
tanks are covered by steel frames, which create a sort of cage around them.
 A polymer inflatable balloon
Image: Augwind

“These structures are intended at supporting the weight of the ground when the polymer
tanks are empty,” Yogev said. “So these tanks are designed not only to sustain internal
pressure but also external pressure.”

The caged inflatable balloons are placed in holes at a depth of 4 meters. The company
then pours a cement-based material around the tanks to fill all the gaps created by the
inflatable balloons.

Once the installation of the tanks has been completed, they are no longer visible, but
are accessible for maintenance purposes via manhole covers. Once everything
solidifies, the polymer tanks adhere to the walls of their respective cages. These
cavities each contain 60-cubic-meter polymer tanks that can store compressed air at a
pressure of 40 bar.

Augwind's system is based on two compression tanks that are placed in the ground
close to each other, in addition to a series of storage tanks. The tanks are each 13
meters in length, with a width of 2.5 meters. The power produced by utility-scale PV
arrays or wind farms can be used to power standard water pumps, which inject water
into the compression tanks. The tanks are sealed, so the air they contain starts to be
compressed up to the top, and then shifts to the storage tanks. With on-demand energy,
the compressed air is released from the storage tanks to drive a powerful water turbine,
which is used to generate electricity.
Yogev explained that compressing air at 40 bar with a standard mechanical piston
would generate temperatures of around 800 C, which would make the operation of the
battery more complex and less efficient.

“Instead, with our technology, the air is compressed with water and the heat produced
by the compression is dissipated into the water itself,” he explained. “We created a
process in which we compress the air without generating any heat and this isothermal
process has a 100% efficiency, as there is no loss of energy consumed by the pump.”

Yogev claimed that Augwind is the first company to achieve such isothermal conditions
in compressed air storage technologies.

He said that heat dissipation is also possible due to the big polymer tanks that are used
to store compressed air, as well as the special concrete mixture used to cover the
underground tanks.

“The concrete we use, which is also a company's patented technology, is able to

levelize itself inside the hole while pouring into all small cracks and voids,” Yogev
explained. “The mixture we use cannot only help the system sustain external and
internal pressure but has also thermal properties that enable a very efficient
compression cycle.”

Popular content
Electrification could drive 51 GW of solar in Canada by 205029 JUNE 2021And that figure is based on
a less ambitious climate change policy than the one Ottawa has committed to since the North
American Renewable Integratio…
Australia’s ‘unsafe’ solar installation standards under fire 2 JULY 2021Australia is a world leader in
rooftop solar deployment, but the head of Queensland-based renewables company REA Global has
criticized the nation’s s…
‘World’s cheapest wafer’ maker plans 2 GW Indian fab24 JUNE 2021U.S. business 1366
Technologies is looking for Indian cell manufacturing partners as it plans to bring its ‘direct wafer’
production technique to the…
From toothbrushes to saving the planet: How ultrasonic delamination could hold the key to battery
recycling30 JUNE 2021The use of ultrasonic sound waves has been applied to battery recovery.
Researchers from the ReLiB project at the U.K.’s Faraday Institution say the…
Fraunhofer ISE unveils 68.9%-efficient III-V solar cell for laser energy transmission systems 29 JUNE
2021The German research institute said the gallium arsenide cell has achieved the highest efficiency
to date for the conversion of light into electricity…
JinkoSolar announces perovskite cell technology platform promising efficiencies close to 30% 25 JUNE
2021The announcement was given by the Chinese module maker in its financial statement for the
first quarter of the year. The company also stated it shipp…
Electrification could drive 51 GW of solar in Canada by 205029 JUNE 2021And that figure is based on
a less ambitious climate change policy than the one Ottawa has committed to since the North
American Renewable Integratio…
Australia’s ‘unsafe’ solar installation standards under fire 2 JULY 2021Australia is a world leader in
rooftop solar deployment, but the head of Queensland-based renewables company REA Global has
criticized the nation’s s…
‘World’s cheapest wafer’ maker plans 2 GW Indian fab24 JUNE 2021U.S. business 1366
Technologies is looking for Indian cell manufacturing partners as it plans to bring its ‘direct wafer’
production technique to the…
From toothbrushes to saving the planet: How ultrasonic delamination could hold the key to battery
recycling30 JUNE 2021The use of ultrasonic sound waves has been applied to battery recovery.
Researchers from the ReLiB project at the U.K.’s Faraday Institution say the…
Fraunhofer ISE unveils 68.9%-efficient III-V solar cell for laser energy transmission systems 29 JUNE
2021The German research institute said the gallium arsenide cell has achieved the highest efficiency
to date for the conversion of light into electricity…
JinkoSolar announces perovskite cell technology platform promising efficiencies close to 30% 25 JUNE
2021The announcement was given by the Chinese module maker in its financial statement for the
first quarter of the year. The company also stated it shipp…
Electrification could drive 51 GW of solar in Canada by 205029 JUNE 2021And that figure is based on
a less ambitious climate change policy than the one Ottawa has committed to since the North
American Renewable Integratio…
 1
 2
 3
 4
 5
 6
Charging cycle

One of the two compression tanks is used for air storage, while the second one is used
for the compression cycle. When the first tank is filled with enough water, it is pumped
into the second tank. This recirculates water back and forth, so it can be reused for
indefinite periods of time, with minimal water consumption.

“The beauty of this system is that it also produces water,” Yogev said, noting the system
can pull water from the air. “It is because the air has always some residual moisture
inside and when you compress it you also generate some water.”

The compressed air is then stored in nearby storage tanks. Their number can be
increased according to the desired storage capacity.

Discharging cycle

Water is used to pump the air in the charging process, as the interaction of water and
air generates minimal heat. In the discharging process, the 40 bar of compressed air
can produce a water jet that can push the water up to 400 meters in the air, according to
Augwind. This water is pumped into a hydro turbine, which are smaller versions of the
turbines used in pumped hydro plants, in order to reproduce electricity.

“Compressed air is the energy and water is just the medium,” Yogev said, noting that
the system can produce more electricity if more pressure is applied.

“The more the energy will be pressurized in the tank, the cheaper the energy will be that
we will produce out of it,” he added.
When it is coupled with PV power production, the entire underground system can be
covered by the panels. There is zero impact on the module temperatures, as the
minimal heat produced in the isothermal compression process is completely absorbed
by the concrete mixture.

Au
gwind places its storage systems in close proximity to PV plants. The panels can also
cover the underground tank area.

Image: Augwind

Pumped hydro

Augwind claims that its technology is safe, with zero risk of explosions.

“The only risk is leakage, and it means some air will be leaked to the ground,” Yogev
said, adding that this issue can be easily resolved with quick repairs. “Our solution is
similar to groundworks – we don't use any polluting materials, we use air and closed-
circled water as raw materials and our carbon footprint is very limited, the system can
be installed underground functional areas, this means that you can build your
generation facility or a data center for example on top of the subterranean storage
tanks.”

The solution is also modular, which means it can be deployed for 10 MWh or 100 MWh
systems with the simple addition of more polymer tanks. Yogev said the technology
works like common pumped hydro storage, with the only difference being that the
systems can be quickly installed almost anywhere, on a bigger or smaller scale, with a
relatively small footprint, and at much lower capex levels. “And you don't need a water
reservoir,” he added.
 Augwin
d installs storage tanks at depths of 4 meters.
Image: Augwind

The company said the storage solution has an efficiency of 80%. It claimed that this
compares to an efficiency rate of up to 90% for lithium-ion storage. Despite the lower
efficiency levels, the compressed air solution purportedly has a lifecycle of more than 40
years, with minimal degradation over an unlimited number of cycles. This compares to
an average lifecycle of 12 years and 4,000 cycles for lithium-ion batteries.

“We have a clear path for cost reductions going forward and that is something that
traditional pumped hydro cannot have,” Yogev said.

Augwind also said that its technology is considerably cheaper than conventional
compressed air storage solutions, or storage in salt caverns. Yogev claimed that salt
storage only makes sense with massive, gigawatt-scale projects.

“Our business model is applicable to wind and solar energy projects ranging in size from
a few megawatts to several dozens of megawatts, for which conventional technologies
for compressed air storage are not applicable,” he said.