Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 29 views

    PWHT Chart Report N°007

    Uploaded by

    mondher zrelli
    This report summarizes a heat treatment performed on item F002, an intermediate pipe/tee. The item was heated to a maximum of 400°C for loading and 380°C for unloading, within the required limits of 425°C. It was held at a temperature range of 725-733°C for 1 hour and 30 minutes, meeting the required minimum of 705-775°C and 75 minutes. Cooling and heating rates were within the maximum allowed rates. The heat treatment conditions and results were reviewed and approved.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PWHT Chart Report N°007

    Uploaded by

    mondher zrelli
    29 views2 pages
    This report summarizes a heat treatment performed on item F002, an intermediate pipe/tee. The item was heated to a maximum of 400°C for loading and 380°C for unloading, within the required limits of 425°C. It was held at a temperature range of 725-733°C for 1 hour and 30 minutes, meeting the required minimum of 705-775°C and 75 minutes. Cooling and heating rates were within the maximum allowed rates. The heat treatment conditions and results were reviewed and approved.

    Original Description:

    c

    Original Title

    PWHT chart Report N°007

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This report summarizes a heat treatment performed on item F002, an intermediate pipe/tee. The item was heated to a maximum of 400°C for loading and 380°C for unloading, within the required limits of 425°C. It was held at a temperature range of 725-733°C for 1 hour and 30 minutes, meeting the required minimum of 705-775°C and 75 minutes. Cooling and heating rates were within the maximum allowed rates. The heat treatment conditions and results were reviewed and approved.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    29 views2 pages

    PWHT Chart Report N°007

    Uploaded by

    mondher zrelli
    This report summarizes a heat treatment performed on item F002, an intermediate pipe/tee. The item was heated to a maximum of 400°C for loading and 380°C for unloading, within the required limits of 425°C. It was held at a temperature range of 725-733°C for 1 hour and 30 minutes, meeting the required minimum of 705-775°C and 75 minutes. Cooling and heating rates were within the maximum allowed rates. The heat treatment conditions and results were reviewed and approved.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    HEAT TRAIMENT RECCORD

    Report N°007
    MYTEC 10-11-2022
    CUSTOMER DAT E”PRE FORMED

    AMBATOVY P.W.H. T
    CLIENT TYPE OF HT
    1B 67—HX—204 A335-P91 + A234-P91
    M/O NO. MATERIAL SPEC.
    INTERMEDIATE Electric heat
    ITEM NAME HEAT SOURCE
    PIPE / TEE TRD 14X8

    (8")
    TAG NO F002
    W/O. NO. CP202208065
    1 Joints
    QUANTITY

    HEAT TREATMENT CONDITION


    [

    REQUIRED All ACTUAL


    CONDITION Location of Thermocouple

    Max 425 °C Max 400 °C TC 1/2


    LOADING TEMP.

    Max 222 °C/hr Max 150 °C/hr


    HEATING RATE

    Min 705—775 °C Min 725—733 °C


    HOLDING TEMP.
    1Hr 30 Min
    Minim um 75 Min
    .FOLDING TIME

    Max 280 °C/hr M ax 280 °C/hr


    COOLING RATE

    Max 425°C Max 380 °C


    UNLOADING TEMP.

    MAX ALLOWABLE VARIATION IN TEMPERATURE

    120 °C
    INPROCESS HEATING

    83 °C TC1 TC2
    DURING HOLDING

    EN-0182A0039 13-07-2023
    Terms controller N° Due Date

    Activities Monitored
    A. Loading / Unloading condition
    B. Calibration status
    C. Thermocouple / quantity
    D. Above heat treatment condition
    E. Chart speed 25 mm/hr.,

    Result of Heat Treatm ent 100%W / Acceptable Approved By

    Prepared by Operator Reviewed by QC inspector


    Authorized Inspector

    JOUA Mohamed ZRELLI Mondher

    You might also like