[Technical Data] Selection is easy with Timing Pulleys and Belts automatic calculation tool available at:

Selection of Timing Belts 1 http://fawos.misumi.jp/FA_WEB/pulley_us/

[Step 1] Setting the Required Design Conditions [Step 2-c] Calculating the Design Power……2GT/3GT Series
(1) Machine Type (2) Power Transmission (3) Load Variances (4) Operation Duration per Day (5) Small Pulley Rotational Speed •Design Power (Pd) =Transmission Power (Pt) ×Overload Coefficient (Ks)
(6) Rotation Ratio (Lg. Pulley # of Teeth / Small Pulley # of Teeth) (7) Shaft Center Distance (Interim) (8) Pulley Diameter Limitation (9) Other Usage Conditions ∙ Calculate the Transmission Power (Pt) in terms of the rated power of the prime motor. (Originally, it is ideal to calculate from the actual load applied to the belt)
A: Normal Motor Load Factor (Ks)=Ko+Ki+Kr+Kh
[Step 2-a] Calculating Design Power……MXL/XL/L/H/S_M/MTS_M/T Series Ko: Load Correction Factor (Table 8) Ki: Idler Correction Factor (Table 9) Kr: Speed Multiplication Correction Factor (Table 10) Kh: Operation Time Correction Factor (Table 11)
•Design Power (Pd) =Transmission Power (Pt) x Overload Factor (Ks) B: Servo Motor Kp, other table*
∙ Calculate Transmission Power at Motor Rated Power Output. (Ideally should be calculated with the load applied to the belt) Table 8. Load Correction Factor (Ko) Table 9. Idler Correction Factor (Ki)
∙ Overload Factor (Ks)=Ko+Kr+Ki Overload Factor (Ks)=Lo+Kr+Ki Ko: Overload Correction Factor (Table 1) Kr: Rotation Ratio Correction Factor (Table 2) Ki: Idler Correction Factor (Table 3)
Type of Motor Idler Position Inside Outside
Table 1. Load Correction Factor (Ko) Peak Output/Basic Output 150% or Less Over 150%~200% or Less Over 250% Loose Side of the Belt   0 +0.1
Motor Single-Phase – – All Types Tense Side of the Belt + 0.1 +0.2
Max. Output not Exceeding 300% of Rated Value Max. Output Exceeding 300% of Rated Value Squirrel 2 Phase – – All Types
AC Motor (Standard Motor, Synchronous Motor) Special Motor ( High torque), Single-Cylinder Engine Cage 4 Phase – 37Kw or More 30Kw or Less
AC Motor Type 6 Phase · 8 Phase – – All Types
Table 10. Speed Multiplication Correction Factor (Kr)
DC Motor (Shunt), Engine with 2 or More Cylinders DC Motor (Series), Operation with Lye Shaft or Clutch
Typical Machines Using a Belt Wound 4 Phase – – 15Kw or Less Speed Increase Ratio Correction Factor
Operation Hours Operation Hours 1 or More Less than 1.25   0
Field 6 Phase – – 11Kw or Less
Intermittent use Regular Use Continuous Use Intermittent use Regular Use Continuous Use Type 8 Phase 1.25 or More Less than 1.75 + 0.1
– – 5.5Kw or Less
1 Day 1 Day 1 Day 1 Day 1 Day 1 Day 1.75 or More Less than 2.5 + 0.2
Synchronous Motor – Standard Torque Type High Torque Type 2.5 or More Less than 3.5 + 0.3
3 to 5 hrs 8 to 12 hrs 8 to 12 hrs 3 to 5 hrs 8 to 12 hrs 8 to 12 hrs
DC Motor Shunt Wound Field Series 3.5 or More + 0.4
Exhibit Instrument, Projector, Measuring Instrument, Medical Machine 1.0 1.2 1.4 1.2 1.4 1.6 Hydraulic Motor – – All Types
Cleaner, Sewing Machine, Office Machine, Carpentry Lathe, Belt Sawing Machine 1.2 1.4 1.6 1.4 1.6 1.8 Office Machinery Printer · Fax Machine · Copy Machine – 1.2 1.4
Light Load Belt Conveyor, Packer, Sifter 1.3 1.5 1.7 1.5 1.7 1.9
Home Appliance
Juicer – 1.4 1.6 Table 11. Operation Time Correction Factor (Kh)
Liquid Mixer, Drill Press, Lathe, Screw Machine, (Circular Sawing) Vacuum Cleaner 1 1.2 1.4 Operation Time Correction Factor
Machine, Planer, Washing Machine, Paper Manufacturing Machine 1.4 1.6 1.8 1.6 1.8 2.0 Finance Equipment Money Exchanger · Ticket Machine · Ticket Gates · Bank Teller Machine 1.3 1.4 1.5 Less than 10 hours (Everyday) 0
(Excluding Pulp Manufacturing Machine), Printing Machine Bakery Equipment 1.2 1.4 1.6 10~16 Hours Continuous (Everyday) +0.2
Mixer (Cement and Viscous Matter), Belt Conveyor (Ore, Coal and Sand), Food · Medicine · Mixer · Granulator 1.4 1.6 1.8 16~24 Hours Continuous (Everyday) +0.4
Grinder, Shaping Machine, Boring Machine, Milling Machine, Compressor Medical Equipment Centrifuge 1.5 1.7 1.9 300 Hours/Year or Less (Seasonal operations etc.) –0.2
1.5 1.7 1.9 1.7 1.9 2.1 Medical Machinery · Measurement Equipment 1 1.2 1.4
(Centrifugal), Vibration Sifter, Textile Machine (Warper and Winder),
Rotary Compressor, Compressor (Reciprocal) Drill Press · Lathe 1.2 1.4 1.6
Conveyor (Apron, Pan, Bucket and Elevator), Extraction, Fan, Machine Tool Milling Machine 1.3 1.5 1.7
Blower (Centrifugal, Suction and Discharge), Power Generator, Wood Lather 1.2 1.4 1.6
Exciter, Hoist, Elevator, Rubber Processor (Calender, Roll and 1.6 1.8 2.0 1.8 2.0 2.2 Printing Book Making Printer · Book Making Machine · Cutter 1.2 1.4 1.6
Extruder), Textile Machine (Weaving Machine, Fine Spinning Textile Machine Textile · Knitting Machinery 1.3 1.5 1.7
Machine, Twisting Machine and Weft Winding Machine) Sawing Machine – Home Use – 1.2 1.4
Sawing Machine
Centrifugal Separator, Conveyor (Flight and Screw), Hammer Sawing Machine – Industrial – 1.6 1.8
1.7 1.9 2.1 1.9 2.1 2.3
Mill, Paper Manufacturing Machine (Pulpapitor) Belt Conveyor · Belt Conveyor – Light Objects 1.1 1.3 1.5
ETypical machines using a belt are listed above. For other machines using a belt, a load correction coefficient should be fixed by reference to this table. Packaging Machine Packaging Machine 1.2 1.4 1.6
EIn the case of starts and stops over 100 times per day or rapid acceleration and deceleration, check the above values multiplied by 1.3. (MTS_M only) Film · Wire Making Calender · Extruder 1.4 1.6 1.8
Table 2. Speed Ration Correction Coefficient (Kr) Table 3. Idlers Correction Coefficient (Ki) Machine Wire Making Machinery 1.4 1.6 1.8
Speed Ratio Coefficient (Kr) Position of Idler Coefficient (Ki)
Table 12. Special Motor Correction Factor (Kp)
1.00 to 1.25 0 Inside the loose side of the belt 0
1.25 to 1.75 0.1 Motor Type Load Correction Factor
Outside the loose side of the belt 0.1 Design as Kp=2.5 for Rated Output, and Kp=0.5 for Peak
1.75 to 2.50 0.2 Servo Motor
2.50 to 3.50 0.3 Inside the loose side of the belt 0.1 Output (Rational speed as applied speed)
3.50 or more 0.4 Outside the loose side of the belt 0.2 Spindle Motor Design as Kp=2.2 for Rated Output and Base Rotational Speed

[Step 2-b] Calculating Design Power ……For P_M/UP_M Series [Step 2-d] Calculating Designed Power …… For EV5GT/EV8YU Series
•Design Power (Pd) =Transmission Power (Pt) x Overload Factor (Ks) •Design Power (Pd) =Transmission Power (Pt) x Overload Factor (Ks)
∙ Calculate Transmission Power at Motor Rated Power Output. (Ideally should be calculated with the load applied to the belt) ∙ Calculate Transmission Power at Motor Rated Power Output. (Ideally should be calculated with the load applied to the belt)
∙ Normal Motor Load Factor (Ks)=Ko+Ki+Kr+Kh ∙ Overload Factor (Ks)=Ko+Ki+Kr+Kh+Km
Ko: Application Coefficient (Table 4) Ki: Idler Correction Factor (Table 5) Kr: Speed Multiplication Correction Factor (Table 6) Kh: Operation Time Correction Factor (Table 7) Ko: Load Correction Factor (Table 13) Ki: Idler Correction Factor (Table 14) Kr: Speed Multiplication Correction Factor (Table 15) Kh: Operation Time Correction Factor (Table 16) Km: Start/Stop Correction Factor (Table 17)
Table 4. Application Coefficient (Ko)
Type of Motor Type Typical Passive Machines Table 13. Load Correction Factor (Ko) Table 14. Idler Correction Factor (Ki)
Type of Passive Unit Peak Output/Basic Output 200% or Less 200 to 300 300% or More A Measuring Instrument, Camera Device, Radar, Induction Spindle Servo Motor (Peak Output/Rated Output) No Idler 0
Medical Machine, Projector Prime Motor Type
A Extremely Smooth Transmission 1.0 1.2 1.4 Belt Conveyor (For Light Load)
Motor Motor 200% or Less 201~299% 300% or More Inside Idler 0.1×(Qty-1)
Chain Conveyor (For Light Load) Robot Scara Type 2.0 2.0 1.6 1.7 1.8 Outside Idler 0.1×(Qty-1)
B Fairly Smooth Transmission 1.3 1.5 1.7 Driller Press, Lathe, Screw Machine
C Transmission with Moderate Impact 1.6 1.8 2.0 Electric Typewriter, Calculator, Duplicator, Injection Mold Machine Mold Fastening · Ball Screw Drive 1.8 1.8 1.3 1.4 1.5
B Printing Press, Cutter, Paper Folder, Printer, Mixer, Machine Tool Lathe · Drill Press 1.6 1.3 1.2 1.3 1.4 Table 15. Speed Multiplication Correction Factor (Kr)
D Transmission with Considerable Impact 1.8 2.0 2.2 Calender-Dryer, Lathe, Belt Sawing Machine,
Operation Duration (Hours/Day) Correction Factor
Plane, Circular Sawing Machine, Planer, Mixer Machine Tool Milling Machine 1.7 1.3 1.2 1.3 1.4
E Transmission with Large Impact 2.0 2.2 2.5 (Liquid), Bread Baking Machine, Flour Kneading 1 or More Less than 1.25 0
Machine, Sifter (Drum and Cone), Sawing Machine
Conveyor 1.8 1.8 1.4 1.5 1.6
Single-Phase − − All Types 1.25 or More Less than 1.75 0.1
Belt Conveyor (Ore, Coal, Sand), Elevator, Boring Medical Machinery · Measurement Equipment 1.5 1.5 1.1 0.1 0.2
2 Poles 100kW or More 90~3.7kW 2.2kW or Less Mill, Grinder, Milling Machine, Shaper, Metal 1.75 or More Less than 2.5 0.2
Sawing Machine, Wind Hoist, Dryer, Washing Packaging Machine 1.6 1.5 1.1 0.1 0.2 2.5 or More Less than 3.5 0.3
Squirrel-Cage 4 Poles 55kW or More 45kW or Less − Machine (Including a Wringer), Excavator, Mixer, Liquid 1.6 1.6 1.2 1.3 1.4
Agitator · 3.5 or More 0.4
Induction 6 Poles 37kW or More 30kW or Less − C Granulating Machine, Pump (Centrifugal, Gear
AC Motor

and Rotary), Compressor (High-Speed Center), Mixer Viscous Material 1.7 1.7 1.3 1.4 1.5
8 Poles 15kW or More 11kW or Less − Stirrer, Mixer (Viscous Matter), Centrifugal Forced
Drilling Machine · Granulator 1.8 1.8 1.4 1.5 1.6 Table 16. Operation Time Correction Factor (Kh)
Blower, General Rubber Handling Machine, Power
4 Poles − 15kW or Less 11kW or Less
Motor

Generator, Sifter (Electric) Centrifuge 1.9 1.9 1.5 1.6 1.7 Operation Duration (Hours/Day) Correction Factor
Conveyor (Apron, Bucket, Flight, Screw),
Wire-Wound 6 Poles − 11kW or Less 7.5kW or Less Hoist, Cutting Press, Shattering Machine, Pulp Mills Ball · Rods 2.2 2.2 1.7 1.8 1.9 8 0.1
Manufacturing Machine, Weaving Machine, Printing Machine · Book Making Machine 2.0 2.0 1.6 1.7 1.8
8 Poles − 5.5kW or Less 3.7kW or Less 8 16 0.2
D Spinning Machine, Twisting Machine, Blender,
Synchronous Motor − Average Torque High Torque Centrifugal Separator, Blower (Axial Flow, Paper Making Machine Calender · Dryer 2.0 2.0 1.6 1.7 1.8 16 0.3
for Mining and Roots), General Construction
DC Motor Shunt Compound Series Equipment, Hammer Mill, Rollgang Textile Machine 2.0 2.0 1.6 1.7 1.8
Internal Combustion Engine 8 or More Cylinders 7 ~ 5 Cylinders 4 ~ 2 Cylinders Crank Press, Pump (Reciprocal), Compressor Wire Related Wire Drawing & Twisting Machine 2.1 2.0 1.6 0.1 0.2 Table 17. Start/Stop Correction Factor (Km)
(Reciprocating), Civil Engineering, Mining
Hydraulic Motor − − All Types E Equipment Including Crushing Machine (Ball, Rod, Woodworking Machine 1.7 1.7 1.2 1.3 1.4 Start/Stop Frequency (Times/Day) Correction Factor
Gravel), Rubber Mixer Pump 2.0 2.0 1.6 1.7 1.8 10 0.1
Note)When the transmission involves regular, reverse revolutions, large momentum or extreme impact, a basic-use coefficient of 2.5 or more can be used. 11 100 0.2
Compressor Reciprocating · Rotating 2.0 2.0 1.6 1.7 1.8
Table 5. Correction Coefficient when Idler is Used (Ki) Table 6. Speed Increase Correction Coefficient (Kr) Table 7. Operating Correction Coefficient (Kh) Fan · Blower Axial Flow · Roots 2.0 1.8 1.3 1.4 1.5 101 500 0.3
Location of Idler in Use Inside Outside Speed Increase Ratio Correction Coefficient Operation Hours Correction Coefficient 501 0.4
Generator · Exciter 1.8 1.8 1.4 1.5 1.6
Loose Side of the Belt   0 +0.1 1 to 1.25   0 Operated 10 or More Hours a Day +0.1 Rubber Industry Machinery · Lumber Mill Machinery 2.0 2.0 1.6 1.7 1.8
Tense Side of the Belt + 0.1 +0.2 1.25 to 1.75 + 0.1 Operated 20 or More Hours a Day +0.2
Should be added for each idler. 1.75 to 2.5 + 0.2 Operated 500 Hours or Less (For Seasonal Operation) −0.2
2.5 to 3.5 + 0.3
3.5 or more + 0.4
3513 3514
 [Technical Data] Selection is easy with Timing Pulleys and Belts automatic calculation tool available at:
Selection of Timing Belts 2 http://fawos.misumi.jp/FA_WEB/pulley_us/

[Step 3] Temporarily Selecting the Type of Belt from Selection Guide Table [Step 4] Determining Number of Teeth of Large and Small Pulley, Belt Length, Inter-Shaft Distance
(1) Select the number of teeth of large and small pulley from P.3519~3529, which can satisfy the predeterminated speed ratio.
Table 18. Selection Guide Table 1 (MXL,XL,L,H,T5,T10) Table 19. Selection Guide Table 2 (S_M series) (However, note that the number of teeth for small pulley should be larger than the min. number of teeth shown in Table 25.)
50,000 10000
40,000
Number of Teeth of Large Pulley Table 25. Min. Number of Teeth of Pulley
30,000
Speed Ratio=
Rotary Speed of Small Pulley

Number of Teeth of Small Pulley Type of Belt, Minimum Number of Teeth

Rotary Speed of Small Pulley (rpm)

Rotary Speed of Small Pulley

20,000

S2M
MXL XL L H S2M S3M S5M S8M S14M MTS8M T5 T10
10,000
S3M 900 or Less 12 10 12 14 14 14 14 22 − 24 12 14
1000 Over 900 1200 or Less 12 10 12 16 14 14 16 24 34 24 12 16
5,000

3,450
Over 1200 1800 or Less 14 11 14 18 16 16 20 26 38 24 14 18
2,500 S5M Over 1800 3600 or Less 16 12 16 20 18 18 24 28 40 24 16 20
S8M
1,750 Over 3600 4800 or Less − 16 20 24 20 20 26 30 48 24 20 22
1,500
MXL XL ∙ T5 L ∙ T10 H Over 4800 10000 or Less − − − − 20 20 26 − − − − −
1,100 S14M
870 100
690
515
500
(2) Determine approx. belt circum. length (Lp') in terms of temporary inter-shaft distance (C'), diameter of large pulley (Dp) and diameter of small pulley (dp).
400
300 (rpm) π(Dp+dp)   (Dp−dp) 2 C ' : Temporary Inter-shaft Distance Dp : Pitch Diameter of Large Pulley (mm)
Lp'=2C'+ +
(rpm)
200
2 4C' dp : Pitch Diameter of Small Pulley (mm) Lp' : Approx. Belt Circum. Length (mm)
100
10
0.01 0.02 0.03 0.05 0.1 0.2 0.3 0.5 2 3 5 10 20 30 50 100 200 300 0.01 0.1 1 10 100 1000
(3) Determine a belt circum. length (Lp') that is the nearest value to approx. belt circum. length referring to P.1173~1184, and then calculate the correct inter-shaft distance using the following formula.
Design Power(kW) Design Power(kW)
b+ b 2−8(Dp−dp) 2 Dp : Pitch Diameter of Large Pulley (mm) C : Inter-shaft Distance
C=
8 dp : Pitch Diameter of Small Pulley (mm)
Table 20. Selection Guide Table 3 (P_M series) Table 21. Selection Guide Table 4 (MTS8M) Lp : Belt Circum. Length (mm)
b=2Lp−π(Dp+dp)
10000
Rotary Speed of Small Pulley

20 toothed 30 toothed 40 toothed

200kW 300kW
100kW 20.30.40 teeth
200 Applicable Pulley Tooth Number 30.40 teeth
70 100
50 100
70
40
50 70 1000
[Step 5] Determining Belt Width
30
40 50
20 30 40
MTS8M
10
20
30
(1)Calculate an approx. belt width using the following formula, and then select a belt width (Bw':mm) that is the nearest value to the approximated value.
20
Design Power

7
10
100 Pd: Design Power
5
7 10 Pd Ps: Reference Transmission Capacity …………Use the Reference Transmission Capacity Table on P.3519~3529.
4
3 5 7 Bw'= × Wp
4 5
Ps·Km Km: Engagement Correction Coefficient(Table 26)
Belt W
Pitch

2 3 4
Wp: Reference Belt Width(Table 27)
idth
Width

)
2
3
(mm
) (mm (rpm) 10
1

kW 0.7
2
P8M
600 250 0.1 1 10 100 Table 26. Engagement Correction Coefficient (Km) Table 27. Reference Belt Width (Wp)
1
400 P5M 200
· 0.5 1 P8M P5M 50 Design Power(kW)
(W) 250
No. of Teeth Engaged Zm More than 6 5 4 3 2 Type of Belt MXL XL L H S2M S3M S5M S8M S14M MTS8M
0.7 1
P5M 0
0.4
0.7 P8M 200
0.3 0.5
P8M M150 10
P5M
0.4 0.5 P8
0.2 0.3 0.4 Km 1.0 0.8 0.6 0.4 0.2 Reference Belt Width 6.4 25.4 25.4 25.4 4 6 10 60 120 60
0.2
0.3 Table 22. Selection Guide Table 5 (UP_M series)
0.1kW
0.2 150 100
70W 0.1kW P3M P2M
060
10000 Zd· Type of Belt P2M P3M P5M P8M T5 T10
100 P2M No. of Teeth Engaged (Zm)=
P3M
50
40
70W 0.1kW
060 P2M
040 1000 360° Reference Belt Width 4 6 10 15 10 10
30 50 70W P3M
40 50 57.3(Dp−dp)
100
Design Power

20 30 40 =180°−
20 30 C
10
20 10 UP8M
7W 10W Zd: No.of Teeth of Small Pulley Dp: Pitch Diameter of Large Pulley(mm) C:Inter-shaft Distance(mm)
10W
70 100 200 300 400 500 700 1000 2000 3000 4000 5000 7000 10000 14000 1 UP5M : Contact Angle(°) dp: Pitch Diameter of Small Pulley(mm)
20 teeth 30 teeth 40 teeth

No. of Teeth of Small Pulley Rotary Speed of Pulley rpm 0.1

kW (2)Check if Design Power (Pd) satisfies the following formula. (If not, select the belt width of one size larger again.)
0.01
· Pd<Ps · Km · Kb Pd : Design Power Km : Engagement Correction Coefficient KL : Length Correction Coefficient (Table 29)
0.001
*2GT · 3GT · EV5GT · EV8YU Ps : Reference Transmission Capacity Kb : Width Correction Coefficient (Table 28)
100 1000 10000
· Pd<Ps · Km · Kb · KL
Rotary Speed of Small Pulley rpm
Table 28. Width Correction Coefficient(Kb)
Type of Belt Width Width Correction Coefficient Type of Belt Width Width Correction Coefficient Type of Belt Width Width Correction Coefficient Type of Belt Width Width Correction Coefficient
Table 23. Selection Guide Table (2GT·3GT series) Table 24. Selection Guide Table (EV5GT·EV8YU series) Belt Nominal mm Kb Belt Nominal mm Kb Belt Nominal mm Kb Belt Nominal mm Kb
019 4.8 0.72 040 4 1.00 40 4 1.00 4 4 1.00
P2M 60
025 6.4 1.00 S2M 060 6 1.59 6 1.59 2GT 6 6 1.67
MXL 037 9.5 1.57 100 10 2.84 100 10 1.78 9 9 2.67
Rotary Speed of Small Pulley
Rotary Speed of Small Pulley

10,000 14,000
050 12.7 2.18 060 6 1.00
P3M 150 15 2.84 6 6 1.00
025 6.4 0.15 S3M 100 10 1.79 100 10 1.00 3GT 9 9 1.66
2GT 10,000
031 7.9 0.21 150 15 2.84
P5M 150 15 1.59 15 15 2.97
Type XL 037 9.5 0.28 100 10 1.00 150 15 1.00 9 9 0.53
3GT P8M 250 25
Type 050 12.7 0.42 S5M 150 15 1.59 1.79 EV5GT 12 12 0.76
1,000 EV5GT 050 12.7 0.42 250 25 2.84 100 10 1.00 15 15 1.00
EV8YU
1,000 075 19.1 0.71 150 15 0.21 150 15 1.60 15 15 0.71
L 100 25.4 1.00 S8M 250 25 0.37
T5 200 20 2.30 EV8YU 20 20 1.00
150 38.1 1.56 MTS8M 300 30 0.45 250 25 2.90 25 25 1.29
075 19.1 0.71 400 40 0.63 150 15 1.60
100 100 25.4 1.00 400 40 0.29 200 20 2.30
100 H 150 38.1 1.56
S14M 600 60 0.45 250 25 2.90
200 50.8 2.14
T10 300 30 3.50
(rpm) (rpm) 400 40 4.60
500 50 5.80
10 10 Table 29. Length Correction Coefficient(KL)
0.01 0.1 1 10 100 0.1 1 10 100 1,000
Length Correction Coefficient(KL) 0.80 0.90 1.00 1.10 1.20
Design Power(kW) Design Power(kW) 2GT Belt Length(mm) 130 or less 131~182 183~280 281~419 420 or less
3GT Belt Length(mm) 190 or less 191~260 261~400 401~599 600 or less
EV5GT Belt Length(mm) 440 or less 441~550 551~800 801~1100 1001 or less
EV8YU Belt Length(mm) 600 or less 601~900 901~1250 1251~1799 1800 or less
3515 3516
 [Technical Data] Selection is easy with Timing Pulleys and Belts automatic calculation tool available at:
Selection of Timing Belts 3 -Transmission Capacity Table- http://fawos.misumi.jp/FA_WEB/pulley_us/

[Step 6] Check if Inter-Shaft Distance Adjustment Range is Larger than that in Table 16 Cautions on Use of Belt
Ci (Min. Adjustment Range, Inside) QHow to Extend Belt
When the belt is too taut, its service life can be shortened, while when it is not taut enough, the belt may (jump off) the groove of the pulley due to an activating torque
or shock load. Keep the belt stationary and optimize its tautness. The warp load necessary to provide the optimum tautness can be calculated from values representing
the belt, its width and the span in equation A below.
t×Y
t Ti+
A   Lp
Td= ················································· Equation A
16
B
CS (Min. Adjustment Range, Outside) Td : Load N Needed for Deflection d at the Center of Span t

Ø
C (Inter-shaft Distance) Ti : Initial Tension N From Table 31 Lp : Length of the Belt (mm)
Td Y : Correction Coefficient From Table 31 C : Inter-shaft Distance (mm)
Table 16. Minimum Inter-Axial Distance Adjustment Range
: Deflection (mm) =0.016t dp : Diameter of the Pitch Circle of the Small Pulley (mm)
S2M S8M P2M
Inter-Shaft MXL XL L H S3M MTS8M P3M P8M T5 T10 C (Inter-shaft Distance) t : Span Length (mm) Dp : Diameter of the Pitch Circle of the Large Pulley (mm)
Length Distance S14M (Dp−dp) 2
Belt Length S5M P5M t= C 2−
Tolerance Tolerance 4
Ci Cs Ci Cs Ci Cs Ci Cs Ci Cs Ci Cs Ci Cs Ci Cs Ci Cs Ci Cs Ci Cs Table 31. Initial Tension (Ti) and Correction Coefficient (Y)
Belt Nominal Width 019 025 031 037 050 075 100 150 200 Belt Nominal Width 60 100 150 250
150 or Less ±0.35 ±0.18 3 3 3 3 2 3 − 3 3 3 3 Belt Width Belt Width
Type Ti·Y mm 4.8 6.4 7.9 9.5 12.7 19.1 25.4 38.1 50.8 Type Ti·Y mm 6 10 15 25
150 to 250 ±0.41 ±0.21 3 3 3 3 2 3 3 3 3 3 3
Ti Max. Value 9.8 13.7 21.6 29.9 Ti Max. Value 13
250 to 380 ±0.46 ±0.23 5 5 5 5 2 3 3 3 3 5 5 − − − − − − − −
MXL N Recommended Value 5.8 8.2 12.9 18.0 P2M N Recommended Value 9.8
380 to 500 ±0.51 ±0.26 10 10 10 10 2 3 3 3 3 10 10
Coefficient Y − − − − − − − − − Coefficient Y 0.9 − − −
500 to 750 ±0.60 ±0.30 10 10 10 10 3 5 3 5 5 10 10
3 5 10 15 10 15 15 10 15 5 10 Ti Max. Value 29 37 44 67 Ti Max. Value 46 74
750 to 1000 ±0.66 ±0.33 15 15 15 15 3 5 5 5 5 15 15 − − − − − − −
XL N Recommended Value 18 25 32 51 P3M N Recommended Value 34 55
1000 to 1250 ±0.76 ±0.38 15 15 15 15 5 10 5 10 10 15 15
Coefficient Y − 3.8 5.4 7.6 11.8 − − − − Coefficient Y − 1.9 3.0 −
1250 to 1500 ±0.82 ±0.41 25 25 25 25 5 10 10 10 10 25 25
Ti Max. Value 76 125 175 273 Ti Max. Value 147 225.4
1500 to 1750 ±0.86 ±0.43 25 25 25 25 5 10 10 10 10 25 25 − − − − − − −
L N Recommended Value 52 87 123 191 P5M N Recommended Value 107.8 166.6
1750 to 2000 ±0.92 ±0.46 30 30 30 30 5 10 10 10 10 30 30
Coefficient Y − − − − 44.1 75.5 107 165 − Coefficient Y − 56.9 82.4 −
Ti Max. Value 293 421 646 889 Ti Max. Value 294 509.6
Length Inter-Shaft 2GT 3GT EV5GT EV8YU
H
− − − − −
222 312 486 668 P8M
− −
225.4 382.2
Belt Length Distance
Tolerance Tolerance
N Recommended Value N Recommended Value
Ci Cs Ci Cs Ci Cs Ci Cs
Coefficient Y − − − − − 142 205 317 423 Coefficient Y − − 135 239
150 or Less ± 0.40 ± 0.20 3 3 3 3
Over 150 250 or Less ± 0.40 ± 0.20 3 3 3 3 Belt Nominal Width 40 60 100 150 250 300 400 600 Belt Nominal Width 100 150 200 250 300 400 500
Over 250 380 or Less ± 0.46 ± 0.23 3 3 3 3 Type Ti·Y
Belt Width
mm 4 6 10 15 25 30 40 60 Type Ti·Y
Belt Width
mm 10 15 20 25 30 40 50
Over 380 500 or Less ± 0.50 ± 0.25 3 3 3 3 Ti Max. Value Ti Max. Value
7.8 12.7 22.6 37.3 59 85 106
− − − − − − − −
Over 500 750 or Less ± 0.60 ± 0.30 5 5 5 5 S2M N Recommended Value 5.9 9.8 16.7 T5 N Recommended Value 24.5 39 59 74
4 5 10 20
Over 750 1000 or Less ± 0.66 ± 0.33 5 5 5 5 Coefficient Y 9.8 15.7 27.4 − − − − − Coefficient Y 16.7 26.5 38.2 47.5 − − −
Over 1000 1250 or Less ± 0.76 ± 0.38 10 10 10 10 Ti Max. Value Ti Max. Value
26 46 73 162 235 294 363 500 628
− − − − − −
Over 1250 1500 or Less ± 0.82 ± 0.41 10 10 10 10 S3M N Recommended Value 20 34 54 T10 N Recommended Value 108 157 196 245 333 422
Over 1500 1750 or Less ± 0.86 ± 0.43 10 10 10 10 Coefficient Y − 26.5 46.1 75.5 − − − − Coefficient Y − 71.6 104.9 130.4 163.8 222.6 281.5
Over 1750 2000 or Less ± 0.92 ± 0.46 10 10 10 10 Ti Max. Value 77 124 221
− − − − −
S5M N Recommended Value 58 93 166
QNotes on Operation Coefficient Y − − 52.8 85.5 151.0 − −
1. Be careful to avoid the ingress of foreign particles. Ti Max. Value 294 510 628 873
 When solid foreign particles enter during operation, it can scratch the belt and adversely affect the engagement of the belt and the pulley. S8M − − −
226 382 470 657
N Recommended Value
In some cases, the pulley may disengage, land on the teeth of the pulley, and be cut. MTS8M
Coefficient Y − − − 98 196 235 333
2. Avoid Adhesion of oil.
Ti Max. Value
Oil on the rubber timing belt may wet and expand it, drastically shortening its service life. − − − − − − 1226 1912
(a)Take special care when using solvent type oil. S14M N Recommended Value 1108 1726

(b)A small amount of lubricant or grease, however, rarely causes a trouble. Coefficient Y − − − − − − 686 1059
3. Do not use the belt in a humid atmosphere.
4. Please use a well-ventilated safety cover. Belt Nominal Width 4 6 9 12 15 20 25
Belt Width
5. The service life of the belt, when used at a high temperature (80˚C or more), can be drastically shortened. Type Ti·Y mm 4 6 9 12 15 20 25
Ti Max. Value 12.2 20.5 32.8
− − − −
‹Reference›Belt Width Tolerance (Unit: mm) 2GT N Recommended Value 9.4 15.8 25.2
Belt Length Coefficient Y − − − − − − −
Belt Width
351 or Less 351 to 840 840 to 1680 1680 or More Ti Max. Value 38 57 96
− − − −
3GT N Recommended Value 29 44 74
10 or Less +0.3 +0.3 +0.3 +0.6
−0.6 −0.6 −0.6 −0.6 Coefficient Y − − − − − − −
+0.6 +0.6 +0.6 +0.6 Ti Max. Value 92 127 163
10 to 40 −0.6 −0.6 −0.6 −0.6 − − − −
EV5GT N Recommended Value 71 98 125
40 to 50 +0.6 +0.6 +1.0 +1.0 Coefficient Y − − − − − − −
−0.6 −0.6 −1.0 −1.3
Ti Max. Value 273 364 455
− − − −
EV8YU N Recommended Value 210 280 350
Coefficient Y − − − − − − −

3517 3518
 [Technical Data] Selection is easy with Timing Pulleys and Belts automatic calculation tool available at:
Selection of Timing Belts 4 -Transmission Capacity Table- http://fawos.misumi.jp/FA_WEB/pulley_us/

Table 32.  Reference Transmission Capacity of MXL Ps  -Nominal Width of Belts 025(6.4mm)- (W) Table 34. Reference Transmission Capacity of L Ps -Nominal Width of Belts 100(25.4mm)- (kW)
No. of Teeth of Small Pulley 12 14 15 16 18 20 22 24 25 26 28 30 32 36 40 No. of Teeth of Small Pulley 12 14 15 16 18 19 20 21 22 24 25 26 28 30 32 36 40 48

Rotary Speed of Diameter of the Rotary Speed of Diameter of the

Pitch Circle(mm) 7.76 9.06 9.70 10.35 11.64 12.94 14.23 15.52 16.17 16.82 18.11 19.40 20.70 23.29 25.97 Pitch Circle(mm) 36.38 42.45 45.48 48.51 54.57 57.61 60.64 63.67 66.70 72.77 75.80 78.83 84.89 90.96 97.02 109.15 121.28 145.53
Small Pulley(rpm) Small Pulley(rpm)
950 9.0 10.5 11.3 12.0 13.5 15.0 16.5 18.0 18.8 19.6 21.1 22.6 24.1 27.1 30.1 725 0.33 0.39 0.42 0.44 0.50 0.53 0.56 0.58 0.61 0.67 0.70 0.72 0.78 0.83 0.89 1.00 1.11 1.33
1160 11.0 12.8 13.8 14.7 16.5 18.4 20.2 22.0 23.0 23.9 25.7 27.6 29.4 33.1 36.7 870 0.40 0.47 0.50 0.53 0.60 0.63 0.67 0.70 0.73 0.80 0.83 0.87 0.93 1.00 1.07 1.20 1.33 1.59
1425 15.8 16.9 18.0 20.3 22.6 24.8 27.1 28.2 29.3 31.6 33.9 36.1 40.6 45.1 950 0.44 0.51 0.55 0.58 0.66 0.69 0.73 0.77 0.80 0.87 0.91 0.95 1.02 1.09 1.16 1.31 1.45 1.73
1750 19.4 20.8 22.2 24.9 27.7 30.5 33.3 34.7 36.0 38.8 41.6 44.3 49.9 55.4 1160 0.53 0.62 0.67 0.71 0.80 0.85 0.89 0.93 0.98 1.07 1.11 1.15 1.24 1.33 1.41 1.59 1.76 2.09
1425 0.77 0.82 0.87 0.98 1.04 1.09 1.14 1.20 1.31 1.36 1.41 1.52 1.62 1.73 1.93 2.13 2.52
2850 33.9 36.1 40.6 45.1 49.6 54.1 56.4 58.6 63.1 67.6 72.1 81.0 90.0
1750 0.94 1.01 1.07 1.20 1.27 1.34 1.40 1.47 1.59 1.66 1.72 1.85 1.97 2.10 2.34 2.58 3.02
3450 41.0 43.7 49.2 54.6 60.1 65.5 68.2 70.9 76.3 81.7 87.1 97.9 108.6
2850 1.73 1.93 2.03 2.13 2.23 2.33 2.52 2.62 2.71 2.89 3.07 3.24 3.56 3.84 4.31
100 0.9 1.1 1.1 1.2 1.4 1.5 1.7 1.9 1.9 2.0 2.2 2.3 2.5 2.8 3.1 3450 2.07 2.31 2.43 2.54 2.66 2.77 2.99 3.09 3.19 3.39 3.58 3.76 4.07 4.33 4.67
200 1.9 2.2 2.3 2.5 2.8 3.1 3.4 3.8 3.9 4.1 4.4 4.7 5.0 5.7 6.3 100 0.04 0.05 0.05 0.06 0.06 0.07 0.07 0.08 0.08 0.09 0.09 0.10 0.10 0.11 0.12 0.13 0.15 0.18
300 2.8 3.3 3.5 3.8 4.2 4.7 5.2 5.7 5.9 6.1 6.6 7.1 7.6 8.5 9.5 200 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.17 0.18 0.19 0.20 0.21 0.23 0.24 0.27 0.30 0.37
400 3.8 4.4 4.7 5.0 5.7 6.3 6.9 7.6 7.9 8.2 8.8 9.5 10.1 11.4 12.6 300 0.13 0.16 0.17 0.18 0.20 0.22 0.23 0.24 0.25 0.27 0.29 0.30 0.32 0.34 0.37 0.41 0.46 0.55
500 4.7 5.5 5.9 6.3 7.1 7.9 8.7 9.5 9.9 10.3 11.1 11.9 12.6 14.2 15.8 400 0.18 0.21 0.23 0.24 0.27 0.29 0.30 0.32 0.34 0.37 0.38 0.40 0.43 0.46 0.49 0.55 0.61 0.74
600 5.7 6.6 7.1 7.6 8.5 9.5 10.4 11.4 11.9 12.3 13.3 14.2 15.2 17.1 19.0 500 0.23 0.27 0.29 0.30 0.34 0.36 0.38 0.40 0.42 0.46 0.48 0.50 0.54 0.58 0.61 0.69 0.77 0.92
700 6.6 7.7 8.3 8.8 10.0 11.1 12.2 13.3 13.8 14.4 15.5 16.6 17.7 19.9 22.2 600 0.27 0.32 0.34 0.37 0.41 0.44 0.46 0.48 0.51 0.55 0.58 0.60 0.64 0.69 0.74 0.83 0.92 1.10
800 7.6 8.8 9.5 10.1 11.4 12.6 13.9 15.2 15.8 16.5 17.7 19.0 20.3 22.8 25.3 700 0.32 0.37 0.40 0.43 0.48 0.51 0.54 0.56 0.59 0.64 0.67 0.70 0.75 0.81 0.86 0.97 1.07 1.28
900 8.5 10.0 10.7 11.4 12.8 14.2 15.7 17.1 17.8 18.5 19.9 21.4 22.8 25.7 28.5 800 0.37 0.43 0.46 0.49 0.55 0.58 0.61 0.64 0.68 0.74 0.77 0.80 0.86 0.92 0.98 1.10 1.22 1.46
900 0.41 0.48 0.52 0.55 0.62 0.66 0.69 0.73 0.76 0.83 0.86 0.90 0.97 1.03 1.10 1.24 1.37 1.64
1000 9.5 11.1 11.9 12.6 14.2 15.8 17.4 19.0 19.8 20.6 22.2 23.8 25.3 28.5 31.7
1000 0.46 0.54 0.58 0.61 0.69 0.73 0.77 0.81 0.84 0.92 0.96 1.00 1.07 1.15 1.22 1.37 1.52 1.81
1100 10.4 12.2 13.0 13.9 15.7 17.4 19.2 20.9 21.8 22.6 24.4 26.1 27.9 31.4 34.8 1100 0.51 0.59 0.63 0.68 0.76 0.80 0.84 0.89 0.93 1.01 1.05 1.09 1.18 1.26 1.34 1.51 1.67 1.99
1200 11.4 13.3 14.2 15.2 17.1 19.0 20.9 22.8 23.8 24.7 26.6 28.5 30.4 34.2 38.0 1200 0.55 0.64 0.69 0.74 0.83 0.87 0.92 0.97 1.01 1.10 1.15 1.19 1.28 1.37 1.46 1.64 1.81 2.15
1300 14.4 15.4 16.5 18.5 20.6 22.6 24.7 25.7 26.8 28.8 30.9 32.9 37.1 41.2 1300 0.70 0.75 0.80 0.90 0.95 1.00 1.05 1.09 1.19 1.24 1.29 1.39 1.48 1.58 1.77 1.96 2.32
1400 15.5 16.6 17.7 19.9 22.2 24.4 26.6 27.7 28.8 31.0 33.3 35.5 39.9 44.3 1400 0.75 0.81 0.86 0.97 1.02 1.07 1.12 1.18 1.28 1.34 1.39 1.49 1.59 1.70 1.90 2.10 2.48
1500 16.6 17.8 19.0 21.4 23.8 26.1 28.5 29.7 30.9 33.3 35.6 38.0 42.8 47.5 1500 0.81 0.86 0.92 1.03 1.09 1.15 1.20 1.26 1.37 1.43 1.48 1.59 1.70 1.81 2.03 2.24 2.64
1600 17.7 19.0 20.3 22.8 25.3 27.9 30.4 31.7 32.9 35.5 38.0 40.5 45.6 50.7 1600 0.86 0.92 0.98 1.10 1.16 1.22 1.28 1.34 1.46 1.52 1.58 1.70 1.81 1.93 2.15 2.38 2.80
1700 18.8 20.2 21.5 24.2 26.9 29.6 32.3 33.7 35.0 37.7 40.4 43.1 48.5 53.8 1700 0.91 0.98 1.04 1.17 1.23 1.30 1.36 1.42 1.55 1.61 1.68 1.80 1.92 2.04 2.28 2.51 2.95
1800 19.9 21.4 22.8 25.7 28.5 31.4 34.2 35.6 37.1 39.9 42.8 45.6 51.3 57.0 1800 0.97 1.03 1.10 1.24 1.31 1.37 1.44 1.51 1.64 1.70 1.77 1.90 2.03 2.15 2.40 2.64 3.10
2000 23.8 25.3 28.5 31.7 34.8 38.0 39.6 41.2 44.3 47.5 50.7 57.0 63.3 1900 1.16 1.31 1.38 1.45 1.52 1.59 1.73 1.80 1.86 2.00 2.13 2.27 2.52 2.77 3.24
2000 1.22 1.37 1.45 1.52 1.59 1.67 1.81 1.89 1.96 2.10 2.24 2.38 2.64 2.90 3.38
2200 26.1 27.9 31.4 34.8 38.3 41.8 43.6 45.3 48.8 52.2 55.7 62.7 69.6
2200 1.34 1.51 1.59 1.67 1.75 1.83 1.99 2.06 2.14 2.29 2.44 2.59 2.87 3.14 3.64
2400 28.5 30.4 34.2 38.0 41.8 45.6 47.5 49.4 53.2 57.0 60.8 68.3 75.9 2400 1.46 1.64 1.73 1.81 1.90 1.99 2.15 2.24 2.32 2.48 2.64 2.80 3.10 3.38 3.87
2600 30.9 32.9 37.1 41.2 45.3 49.4 51.5 53.5 57.6 61.7 65.8 74.0 82.1 2500 1.52 1.70 1.80 1.89 1.97 2.06 2.24 2.32 2.41 2.58 2.74 2.90 3.20 3.49 3.98
2800 35.5 39.9 44.3 48.8 53.2 55.4 57.6 62.0 66.4 70.8 79.6 88.4 2600 1.58 1.77 1.86 1.96 2.05 2.14 2.32 2.41 2.50 2.67 2.84 3.00 3.31 3.59 4.09
3000 38.0 42.8 47.5 52.2 57.0 59.3 61.7 66.4 71.2 75.9 85.3 94.6 2800 1.70 1.90 2.00 2.10 2.20 2.29 2.48 2.58 2.67 2.85 3.02 3.19 3.51 3.80 4.27
3200 40.5 45.6 50.7 55.7 60.8 63.3 65.8 70.8 75.9 80.9 90.9 100.9 3000 1.81 2.03 2.13 2.24 2.34 2.44 2.64 2.74 2.84 3.02 3.20 3.38 3.70 3.98 4.43
3400 43.1 48.5 53.8 59.2 64.5 67.2 69.9 75.2 80.6 85.9 96.5 107.1 3200 1.93 2.15 2.27 2.38 2.48 2.59 2.80 2.90 3.00 3.19 3.38 3.55 3.87 4.15 4.56
3600 45.6 51.3 57.0 62.7 68.3 71.2 74.0 79.6 85.3 90.9 102.1 113.3 3400 2.04 2.28 2.40 2.51 2.62 2.73 2.95 3.05 3.16 3.35 3.54 3.72 4.04 4.30 4.65
3800 54.1 60.1 66.1 72.1 75.1 78.1 84.0 90.0 95.9 107.7 119.5 3600 2.15 2.40 2.52 2.64 2.76 2.87 3.10 3.20 3.31 3.51 3.70 3.87 4.18 4.43 4.71
4000 57.0 63.3 69.6 75.9 79.0 82.1 88.4 94.6 100.9 113.3 125.6 3800 2.52 2.65 2.77 2.89 3.01 3.24 3.35 3.45 3.66 3.84 4.02 4.31 4.54 4.73
4000 2.64 2.77 2.90 3.02 3.14 3.38 3.49 3.59 3.80 3.98 4.15 4.43 4.62 4.72
4200 59.8 66.4 73.0 79.6 82.9 86.2 92.8 99.3 105.8 118.8 131.8
4200 2.76 2.89 3.02 3.15 3.27 3.51 3.62 3.73 3.93 4.11 4.27 4.53 4.69 4.66
4400 62.7 69.6 76.5 83.4 86.8 90.3 97.1 104.0 110.8 124.4 137.9 4400 2.87 3.01 3.14 3.27 3.40 3.64 3.75 3.85 4.05 4.23 4.38 4.61 4.72 4.56
4600 65.5 72.7 79.9 87.1 90.7 94.3 101.5 108.6 115.8 129.9 144.0 4600 2.99 3.13 3.26 3.39 3.52 3.76 3.87 3.97 4.17 4.33 4.48 4.67 4.73 4.42
4800 68.3 75.9 83.4 90.9 94.6 98.4 105.8 113.3 120.7 135.4 150.0 4800 3.10 3.24 3.38 3.51 3.64 3.87 3.98 4.09 4.27 4.43 4.56 4.71 4.72 4.23
*Values in the table above are for nominal belt width 025(6.4mm). For other belt widths, those values should be multiplied by the width correction coefficient, Kb, shown in Table 28. * The circumferential speed of pulley is 33(m/s)or more; a dynamic balance for the pulley is essential.
*Values in the table above are for nominal belt width 100(25.4mm). For other belt widths, those values should be multiplied by the width correction coefficient, Kb, shown in Table 28.

Table 33.  Reference Transmission Capacity of XL Ps  -Nominal Width of Belts 100(25.4mm)- (kW) Table 35. Reference Transmission Capacity of H Ps -Nominal Width of Belts 100(25.4mm)- (kW)
No. of Teeth of Small Pulley 10 11 12 14 15 16 18 19 20 21 22 24 25 26 28 30 No. of Teeth of Small Pulley 14 15 16 18 19 20 21 22 24 25 26 28 30 32 36 40 48
Diameter of the Rotary Speed of Diameter of the
Rotary Speed of 16.17 17.79 19.40 22.64 24.26 25.87 29.11 30.72 32.34 33.96 35.57 38.81 40.43 42.04 45.28 48.51 Pitch Circle(mm) 56.60 60.64 64.68 72.77 76.81 80.85 84.89 88.94 97.02 101.06 105.1 113.19 121.28 129.36 145.53 161.70 194.04
Small Pulley(rpm) Pitch Circle(mm) Small Pulley(rpm)
725 1.33 1.43 1.52 1.71 1.81 1.90 2.00 2.09 2.28 2.38 2.47 2.66 2.85 3.04 3.41 3.79 4.53
950 0.14 0.16 0.17 0.20 0.21 0.23 0.26 0.27 0.29 0.30 0.32 0.35 0.36 0.38 0.41 0.43 870 1.60 1.71 1.83 2.05 2.17 2.28 2.40 2.51 2.74 2.85 2.96 3.19 3.41 3.64 4.08 4.53 5.41
1160 0.17 0.19 0.21 0.25 0.26 0.28 0.32 0.33 0.35 0.37 0.39 0.42 0.44 0.46 0.50 0.53 950 1.99 2.24 2.37 2.49 2.61 2.74 2.99 3.11 3.23 3.48 3.72 3.97 4.45 4.93 5.89
1425 0.26 0.30 0.32 0.35 0.39 0.41 0.43 0.46 0.48 0.52 0.54 0.57 0.61 0.65 1160 2.43 2.74 2.89 3.04 3.19 3.34 3.64 3.79 3.94 4.23 4.53 4.82 5.41 5.99 7.12
1750 0.32 0.37 0.40 0.43 0.48 0.51 0.53 0.56 0.59 0.64 0.67 0.69 0.75 0.80 1425 3.35 3.54 3.72 3.91 4.09 4.45 4.63 4.81 5.17 5.53 5.89 6.59 7.27 8.61
2850 0.52 0.61 0.65 0.07 0.78 0.82 0.87 0.91 0.95 1.04 1.08 1.12 1.21 1.29 1750 4.11 4.33 4.55 4.78 5.00 5.44 5.66 5.87 6.31 6.73 7.16 7.98 8.79 10.32
3450 0.63 0.74 0.79 0.84 0.94 1.00 1.05 1.10 1.15 1.25 1.30 1.35 1.45 1.55 2850 7.27 7.61 7.95 8.61 8.93 9.25 9.87 10.48 11.06 12.16 13.15 14.80
100 0.01 0.01 0.01 0.02 0.02 0.02 0.02 0.02 0.03 0.03 0.03 0.03 0.03 0.04 0.04 0.04 3450 8.68 9.07 9.45 10.19 10.55 10.91 11.59 12.24 12.85 13.95 14.87 16.09
200 0.03 0.03 0.03 0.04 0.04 0.04 0.05 0.05 0.06 0.06 0.06 0.07 0.07 0.08 0.08 0.09 100 0.18 0.19 0.21 0.23 0.25 0.26 0.27 0.28 0.31 0.32 0.34 0.36 0.39 0.42 0.47 0.52 0.63
200 0.36 0.39 0.42 0.47 0.50 0.52 0.55 0.57 0.63 0.65 0.68 0.73 0.79 0.84 0.94 1.05 1.26
300 0.04 0.05 0.05 0.06 0.06 0.07 0.08 0.08 0.09 0.09 0.10 0.11 0.11 0.12 0.12 0.13 300 0.55 0.59 0.63 0.71 0.75 0.79 0.83 0.86 0.94 0.98 1.02 1.10 1.18 1.26 1.42 1.57 1.89
400 0.06 0.06 0.07 0.08 0.09 0.09 0.11 0.11 0.12 0.12 0.13 0.14 0.15 0.16 0.17 0.18 400 0.73 0.79 0.84 0.94 1.00 1.05 1.10 1.15 1.26 1.31 1.36 1.47 1.57 1.68 1.89 2.10 2.52
500 0.07 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.16 0.18 0.19 0.20 0.21 0.23 500 0.92 0.98 1.05 1.18 1.25 1.31 1.38 1.44 1.57 1.64 1.71 1.84 1.97 2.10 2.36 2.62 3.14
600 0.09 0.10 0.11 0.12 0.13 0.14 0.16 0.17 0.18 0.19 0.20 0.22 0.23 0.24 0.25 0.27 600 1.10 1.18 1.26 1.42 1.50 1.57 1.65 1.73 1.89 1.97 2.05 2.20 2.36 2.52 2.83 3.14 3.76
700 0.10 0.11 0.12 0.15 0.16 0.17 0.19 0.20 0.21 0.22 0.23 0.25 0.27 0.28 0.30 0.32 700 1.29 1.38 1.47 1.65 1.75 1.84 1.93 2.02 2.20 2.30 2.39 2.57 2.75 2.93 3.30 3.66 4.38
800 0.12 0.13 0.14 0.17 0.18 0.19 0.22 0.23 0.24 0.25 0.27 0.29 0.30 0.32 0.34 0.37 800 1.47 1.57 1.68 1.89 1.99 2.10 2.20 2.31 2.52 2.62 2.73 2.93 3.14 3.35 3.76 4.17 4.99
900 0.13 0.15 0.16 0.19 0.20 0.22 0.25 0.26 0.27 0.29 0.30 0.33 0.34 0.36 0.38 0.41 900 1.65 1.77 1.89 2.13 2.24 2.36 2.48 2.60 2.83 2.95 3.06 3.30 3.53 3.76 4.22 4.68 5.59
1000 0.15 0.16 0.18 0.21 0.23 0.24 0.27 0.29 0.30 0.32 0.33 0.37 0.38 0.40 0.43 0.46 1000 2.10 2.36 2.49 2.62 2.75 2.88 3.14 3.27 3.40 3.66 3.92 4.17 4.68 5.19 6.18
1100 2.31 2.60 2.74 2.88 3.02 3.17 3.45 3.59 3.74 4.02 4.30 4.58 5.14 5.69 6.77
1100 0.16 0.18 0.20 0.23 0.25 0.27 0.30 0.32 0.33 0.35 0.37 0.40 0.42 0.44 0.47 0.50 1200 2.52 2.83 2.99 3.14 3.30 3.45 3.76 3.92 4.07 4.38 4.68 4.99 5.59 6.18 7.35
1200 0.18 0.20 0.22 0.25 0.27 0.29 0.33 0.35 0.37 0.38 0.40 0.44 0.46 0.48 0.51 0.55 1300 3.06 3.23 3.40 3.57 3.74 4.07 4.24 4.40 4.73 5.06 5.39 6.03 6.67 7.91
1300 0.24 0.28 0.30 0.32 0.36 0.38 0.40 0.42 0.44 0.48 0.50 0.52 0.56 0.59 1400 3.30 3.48 3.66 3.84 4.02 4.38 4.55 4.73 5.09 5.44 5.79 6.48 7.16 8.47
1400 0.25 0.30 0.32 0.34 0.38 0.41 0.43 0.45 0.47 0.51 0.53 0.56 0.60 0.64 1500 3.53 3.72 3.92 4.11 4.30 4.68 4.87 5.06 5.44 5,81 6.18 6.91 7.63 9.01
1500 0.27 0.32 0.34 0.37 0.41 0.43 0.46 0.48 0.50 0.55 0.57 0.59 0.64 0.69 1600 3.76 3.97 4.17 4.38 4.58 4.99 5.19 5.39 5.79 6.18 6.57 7.35 8.10 9.55
1600 0.29 0.34 0.37 0.39 0.44 0.46 0.49 0.51 0.54 0.59 0.61 0.63 0.68 0.73 1700 3.99 4.21 4.43 4.64 4.86 5.29 5.50 5.71 6.13 6.55 6.96 7.77 8.56 10.07
1700 0.31 0.36 0.39 0.41 0.47 0.49 0.52 0.54 0.57 0.62 0.65 0.67 0.73 0.78 1800 4.22 4.45 4.68 4.91 5.14 5.59 5.81 6.03 6.48 6.91 7.35 8.19 9.01 10.57
1800 0.33 0.38 0.41 0.44 0.49 0.52 0.55 0.58 0.60 0.66 0.69 0.71 0.77 0.82 1900 4.93 5.17 5.41 5.89 6.12 6.35 6.82 7.27 7.73 8.61 9.46 11.06
2000 5.19 5.44 5.69 6.18 6.43 6.67 7.16 7.63 8.10 9.01 9.89 11.53
2000 0.37 0.43 0.46 0.49 0.55 0.58 0.61 0.64 0.67 0.73 0.76 0.79 0.85 0.91
2100 5.44 5.70 5.96 6.48 6.73 6.99 7.49 7.98 8.47 9.41 10.32 11.99
2200 0.40 0.47 0.50 0.54 0.60 0.64 0.67 0.70 0.74 0.80 0.84 0.87 0.94 1.00 2200 5.69 5.96 6.23 6.77 7.03 7.30 7.82 8.33 8.83 9.81 10.73 12.43
2400 0.44 0.51 0.55 0.59 0.66 0.70 0.73 0.77 0.80 0.88 0.91 0.95 1.02 1.09 2300 5.94 6.22 6.50 7.06 7.33 7.61 8.15 8.68 9.19 10.19 11.14 12.85
2600 0.48 0.56 0.59 0.63 0.71 0.75 0.79 0.83 0.87 0.95 0.99 1.03 1.10 1.18 2400 6.18 6.48 6.77 7.35 7.63 7.91 8.47 9.01 9.55 10.57 11.53 13.25
2800 0.51 0.60 0.64 0.68 0.77 0.81 0.85 0.89 0.94 1.02 1.06 1.10 1.19 1.27 2500 6.43 6.73 7.03 7.63 7.93 8.22 8.79 9.35 9.89 10.94 11.91 13.63
3000 0.55 0.64 0.69 0.73 0.82 0.87 0.91 0.96 1.00 1.09 1.14 1.18 1.27 1.35 2600 6.67 6.99 7.30 7.91 8.22 8.52 9.10 9.68 10.24 11.30 12.28 13.99
3200 0.59 0.68 0.73 0.78 0.88 0.92 0.97 1.02 1.07 1.16 1.21 1.26 1.35 1.44 2800 7.16 7.49 7.82 8.47 8.79 9.10 9.72 10.32 10.90 11.99 12.99 14.65
3000 7.63 7.98 8.33 9.01 9.35 9.68 10.32 10.94 11.53 12.64 13.63 15.21
3400 0.62 0.73 0.78 0.83 0.93 0.98 1.03 1.08 1.13 1.23 1.28 1.33 1.43 1.53
3200 8.10 8.47 8.83 9.55 9.89 10.24 10.90 11.53 12.14 13.25 14.22 15.67
3600 0.66 0.77 0.82 0.88 0.98 1.04 1.09 1.14 1.20 1.30 1.35 1.41 1.51 1.61 3400 8.56 8.95 9.33 10.07 10.42 10.78 11.45 12.10 12.71 13.81 14.75 16.02
3800 0.87 0.92 1.04 1.09 1.15 1.21 1.26 1.37 1.43 1.48 1.59 1.69 3600 9.01 9.41 9.81 10.57 10.94 11.30 11.99 12.64 13.25 14.33 15.21 16.26
4000 0.91 0.97 1.09 1.15 1.21 1.27 1.33 1.44 1.50 1.55 1.67 1.78 3800 10.28 11.06 11.44 11.80 12.50 13.15 13.75 14.80 15.60 16.38
4200 0.96 1.02 1.14 1.21 1.27 1.33 1.39 1.51 1.57 1.63 1.74 1.86 4000 10.73 11.53 11.91 12.28 12.99 13.63 14.22 15.21 15.92 16.37
4400 1.00 1.07 1.20 1.26 1.33 1.39 1.45 1.58 1.64 1.70 1.82 1.94 4200 11.18 11.99 12.37 12.75 13.44 14.08 14.65 15.56 16.16 16.23
4600 1.05 1.12 1.25 1.32 1.38 1.45 1.52 1.64 1.71 1.77 1.90 2.02 4400 11.61 12.43 12.81 13.19 13.87 14.49 15.03 15.86 16.31 15.94
4800 1.09 1.16 1.30 1.37 1.44 1.51 1.58 1.71 1.78 1.84 1.97 2.10 4600 12.03 12.85 13.23 13.60 14.28 14.87 15.37 16.09 16.39 15.51
4800 12.43 13.25 13.63 13.99 14.65 15.21 15.67 16.26 16.37 14.93
*Values in the table above are for nominal belt width 100(25.4mm). For other belt widths, those values should be multiplied by the width correction coefficient, Kb, shown in Table 28. * The circumferential speed of pulley is 33(m/s)or more; a dynamic balance for the pulley is essential.
*Values in the table above are for nominal belt width 100(25.4mm). For other belt widths, those values should be multiplied by the width correction coefficient, Kb, shown in Table 28.

3519 3520
 [Technical Data] Selection is easy with Timing Pulleys and Belts automatic calculation tool available at:
Selection of Timing Belts 5 -Transmission Capacity Table- http://fawos.misumi.jp/FA_WEB/pulley_us/

Table 36. Reference Transmission Capacity of S2M Ps -Belt Width 4mm- (W) Table 38. Reference Transmission Capacity of S5M Ps -Belt Width 10mm- (W)
No. of Teeth of Small Pulley 14 15 16 18 20 22 24 25 26 28 30 32 36 40 44 48 50 60 No. of Teeth of Small Pulley 14 15 16 18 20 22 24 25 26 28 30 32 36 40 44 48 60

Rotary Speed of Diameter of the Rotary Speed of Diameter of the

Pitch Circle(mm) 8.91 9.55 10.19 11.46 12.73 14.01 15.28 15.92 16.55 17.83 19.10 20.37 22.92 25.46 28.01 30.56 31.83 38.20 Pitch Circle(mm) 22.28 23.87 25.46 28.65 31.83 35.01 38.20 39.79 41.38 44.56 47.75 50.93 57.30 63.66 70.03 76.39 95.49
Small Pulley(rpm) Small Pulley(rpm)
870 11 12 14 16 19 21 23 25 26 28 30 33 37 41 46 50 52 62 870 173 192 210 246 282 317 352 369 386 420 453 486 551 614 677 738 916
1160 13 15 17 20 23 26 29 31 32 35 38 41 46 52 57 62 65 77 1160 216 239 263 309 355 399 443 465 487 529 572 613 695 775 854 931 1154
1750 17 20 22 27 31 35 39 41 43 47 51 55 63 70 78 85 88 105 1750 293 326 359 425 488 551 613 643 673 733 792 849 963 1073 1181 1286 1587
3500 26 30 34 41 49 56 63 67 70 77 83 90 102 115 126 138 143 170 3500 475 534 592 705 816 923 1029 1080 1131 1231 1330 1425 1611 1787 1955 2115 2544
50 1 1 1 2 2 2 2 2 2 3 3 3 3 4 4 5 5 6 50 16 18 19 22 25 28 31 33 34 37 40 43 48 54 59 64 80
100 2 2 2 3 3 4 4 4 4 5 5 6 6 7 8 8 9 11 100 30 32 35 41 46 52 57 60 62 68 73 78 88 98 108 118 147
150 3 3 3 4 5 5 6 6 6 7 7 8 9 10 11 12 12 15 150 42 46 50 58 66 73 81 85 89 96 104 111 125 140 154 168 209
200 4 4 4 5 6 7 7 8 8 9 9 10 11 13 14 15 16 19 200 53 58 63 74 84 94 104 108 113 123 132 142 161 179 197 215 268
250 4 5 5 6 7 8 9 9 10 10 11 12 14 15 17 18 19 23 250 64 70 76 89 101 113 125 131 137 149 160 172 194 217 239 260 324
300 5 5 6 7 8 9 10 11 11 12 13 14 16 18 19 21 22 26 300 74 81 89 103 118 132 146 153 160 173 187 200 227 253 279 304 378
350 6 6 7 8 9 10 11 12 13 14 15 16 18 20 22 24 25 30 350 84 92 101 118 134 150 166 174 182 198 213 228 259 288 318 346 431
400 6 7 8 9 10 11 13 13 14 15 16 18 20 22 25 27 28 33 400 93 103 112 131 150 168 186 195 203 221 238 255 289 323 355 388 482
450 7 8 8 10 11 13 14 15 15 17 18 19 22 25 27 30 31 37 450 103 113 124 145 165 185 205 215 224 244 263 282 319 356 392 428 532
500 7 8 9 11 12 14 15 16 17 18 20 21 24 27 29 32 33 40 500 112 123 135 158 180 202 224 234 245 266 287 308 349 389 428 467 581
550 8 9 10 11 13 15 16 17 18 20 21 23 26 29 32 35 36 43 550 121 133 146 170 195 218 242 254 265 288 311 333 378 421 464 506 629
600 8 9 10 12 14 16 18 18 19 21 23 24 28 31 34 37 39 46 600 129 143 156 183 209 235 260 272 285 310 334 358 406 453 499 544 676
650 9 10 11 13 15 17 19 20 21 22 24 26 30 33 36 40 41 49 650 138 152 167 195 223 250 278 291 304 331 357 383 434 484 533 581 722
700 9 10 12 14 16 18 20 21 22 24 26 28 31 35 39 42 44 52 700 146 161 177 207 237 266 295 309 323 351 379 407 461 514 566 618 767
750 10 11 12 14 17 19 21 22 23 25 27 29 33 37 41 44 46 55 750 154 171 187 219 250 281 312 327 342 372 401 431 488 544 599 654 812
800 10 12 13 15 17 20 22 23 24 26 28 31 35 39 43 47 49 58 800 162 179 197 231 264 296 329 345 361 392 423 454 514 574 632 689 856
850 11 12 13 16 18 21 23 24 25 28 30 32 36 41 45 49 51 61 850 170 188 206 242 277 311 345 362 379 412 445 477 541 603 664 724 899
900 11 13 14 16 19 22 24 25 26 29 31 34 38 43 47 51 53 63 900 178 197 216 253 290 326 362 379 397 432 466 500 566 632 696 759 941
950 12 13 14 17 20 22 25 26 28 30 33 35 40 44 49 53 56 66 950 185 205 225 264 303 341 378 396 415 451 487 522 592 660 727 793 983
1000 12 14 15 18 21 23 26 27 29 31 34 36 41 46 51 55 58 69 1000 193 214 234 275 315 355 394 413 432 470 507 544 617 688 758 826 1025
1100 13 14 16 19 22 25 28 29 31 34 36 39 44 50 55 60 62 74 1100 207 230 252 297 340 383 425 446 466 507 548 588 666 743 818 892 1106
1200 14 15 17 20 24 27 30 31 33 36 39 42 47 53 58 64 66 79 1200 221 246 270 318 364 410 456 478 500 544 588 630 715 797 877 956 1185
1300 14 16 18 22 25 28 32 33 35 38 41 44 50 56 62 68 71 84 1300 235 261 287 338 388 437 485 509 533 580 626 672 762 849 935 1019 1262
1400 15 17 19 23 26 30 33 35 37 40 44 47 53 60 66 72 75 89 1400 248 276 304 358 411 463 515 540 565 615 664 713 808 901 992 1081 1338
1500 16 18 20 24 28 31 35 37 39 42 46 49 56 63 69 75 79 94 1500 262 291 320 378 434 489 543 570 597 649 701 753 853 951 1047 1141 1411
1600 17 19 21 25 29 33 37 39 41 44 48 52 59 66 73 79 82 98 1600 274 305 336 397 456 514 571 600 628 683 738 792 898 1001 1102 1200 1483
1700 17 19 22 26 30 34 39 41 43 46 50 54 62 69 76 83 86 103 1700 287 319 352 415 478 539 599 629 658 716 774 830 941 1049 1155 1258 1553
1800 18 20 23 27 31 36 40 42 44 48 52 56 64 72 79 86 90 107 1800 299 333 367 434 499 563 626 657 688 749 809 868 984 1097 1207 1314 1621
1900 18 21 23 28 33 37 42 44 46 50 55 59 67 75 82 90 94 111 1900 311 347 382 452 520 587 653 685 717 781 844 905 1026 1144 1258 1370 1688
2000 19 22 24 29 34 39 43 46 48 52 57 61 69 78 85 93 97 115 2000 323 360 397 470 541 611 679 713 746 813 878 942 1068 1189 1308 1424 1753
2200 20 23 26 31 36 41 46 49 51 56 61 65 74 83 92 100 104 124 2200 346 386 426 504 581 656 730 767 803 874 944 1013 1148 1279 1406 1529 1879
2400 21 24 27 33 38 44 49 52 54 59 64 69 79 88 97 106 111 131 2400 367 411 454 538 620 701 780 819 858 934 1009 1082 1226 1365 1500 1630 1998
2600 22 25 28 35 40 46 52 55 57 63 68 73 84 93 103 112 117 139 2600 389 435 480 570 658 744 828 870 911 991 1071 1149 1301 1448 1590 1727 2111
2800 23 26 30 36 42 49 55 57 60 66 72 77 88 98 109 118 123 146 2800 409 458 507 602 695 786 875 919 962 1048 1132 1214 1374 1528 1677 1820 2218
3000 24 28 31 38 44 51 57 60 63 69 75 81 92 103 114 124 129 153 3000 429 481 532 633 731 826 920 967 1012 1102 1190 1277 1445 1606 1761 1910 2319
3200 25 29 32 39 46 53 60 63 66 72 79 85 96 108 119 130 135 160 3200 448 502 556 662 765 866 965 1013 1061 1155 1247 1338 1513 1680 1841 1995 2414
3400 26 30 33 41 48 55 62 65 69 75 82 88 100 112 124 135 140 167 3400 466 524 580 691 799 904 1008 1058 1108 1206 1303 1397 1579 1752 1918 2076 2502
3600 26 30 34 42 50 57 64 68 71 78 85 92 104 117 129 140 146 173 3600 484 544 603 719 832 942 1049 1102 1154 1256 1356 1454 1642 1821 1992 2153 2584
3800 27 31 35 44 51 59 67 70 74 81 88 95 108 121 133 145 151 179 3800 501 564 626 747 864 978 1090 1145 1199 1305 1408 1509 1704 1888 2062 2227 2659
4000 28 32 36 45 53 61 69 73 76 84 91 98 112 125 138 150 156 185 4000 518 583 647 773 895 1014 1130 1186 1242 1352 1459 1563 1763 1951 2129 2296 2728
4500 29 34 39 48 57 66 74 78 82 90 98 106 121 135 149 162 168 199 4500 558 629 699 837 970 1098 1224 1285 1345 1463 1578 1689 1901 2098 2282 2452 2870
5000 30 36 41 51 60 70 79 83 88 96 105 113 129 144 159 173 179 211 5000 595 672 748 896 1039 1177 1312 1377 1441 1566 1688 1804 2025 2228 2414 2581 2966
5500 32 37 43 53 63 74 83 88 93 102 111 119 136 152 168 183 190 223 5500 629 712 793 951 1104 1251 1393 1462 1530 1661 1788 1909 2135 2340 2523 2683 3014
6000 33 38 44 56 66 77 87 92 97 107 117 126 143 160 176 192 199 233 6000 661 749 835 1003 1164 1319 1468 1540 1611 1747 1878 2002 2231 2434 2609 2756 3011
6500 33 40 46 58 69 80 91 97 102 112 122 132 150 168 184 200 208 243 6500 690 783 874 1051 1220 1382 1537 1612 1685 1825 1958 2084 2312 2508 2672 2800 2955
7000 34 41 47 60 72 83 95 100 106 117 127 137 156 174 192 208 216 251 7000 716 814 910 1096 1272 1440 1600 1677 1752 1895 2029 2154 2378 2563 2709 2812 2841
7500 34 41 48 61 74 86 98 104 110 121 132 142 162 181 198 215 223 259 7500 741 843 943 1137 1320 1493 1657 1735 1811 1955 2090 2213 2428 2598 2720 2791 2666
8000 35 42 49 63 76 89 101 107 113 125 136 147 167 187 205 222 229 265 8000 763 870 974 1174 1363 1540 1708 1787 1863 2007 2140 2260 2462 2611 2703 2735 2427
8500 35 43 50 64 78 91 104 110 116 128 140 151 172 192 210 227 235 270 8500 783 894 1001 1208 1402 1583 1752 1831 1908 2050 2179 2294 2479 2602 2658 2643 2122
9000 35 43 51 65 80 94 107 113 119 132 144 155 177 197 215 232 240 275 9000 801 915 1026 1239 1436 1620 1790 1869 1944 2084 2208 2315 2479 2570 2583 2513 1745

*Values in the table above are for 4mm belt width. For other belt widths, those values should be multiplied by the width correction coefficient, Kb, shown in Table 28. * The circumferential speed of pulley is 33(m/s)or more; a dynamic balance for the pulley is essential.
*Values in the table above are for 10mm belt width. For other belt widths, those values should be multiplied by the width correction coefficient, Kb, shown in Table 28.
Table 37. Reference Transmission Capacity of S3M Ps -Belt Width 6mm- (W) Table 39. Reference Transmission Capacity of S8M Ps -Belt Width 60mm- (kW)
No. of Teeth of Small Pulley 14 15 16 18 20 22 24 25 26 28 30 32 36 40 44 48 50 60 No. of Teeth of Small Pulley 20 21 22 24 25 26 28 30 32 34 36 38 40 44 48 50 60 72 84

Rotary Speed of Diameter of the Rotary Speed of Diameter of the

Pitch Circle(mm) 13.37 14.32 15.28 17.19 19.10 21.01 22.92 23.87 24.83 26.74 28.65 30.56 34.38 38.20 42.02 45.84 47.75 57.30 Pitch Circle(mm) 50.93 53.48 56.02 61.12 63.66 66.21 71.30 76.39 81.49 86.58 91.67 96.77 101.86 112.05 122.23 127.32 152.79 183.35 213.90
Small Pulley(rpm) Small Pulley(rpm)
870 53 58 62 73 79 87 95 99 103 110 118 125 140 155 169 182 188 222 870 6.38 6.70 7.02 7.66 7.98 8.29 8.93 9.56 10.20 10.83 11.47 12.10 12.73 14.00 15.25 15.88 19.01 22.73 26.41
1160 67 72 78 92 99 110 119 124 129 139 148 158 176 194 212 229 238 279 1160 8.51 8.93 9.35 10.20 10.62 11.05 11.89 12.73 13.58 14.42 15.25 16.09 16.93 18.60 20.26 21.08 25.19 30.03 34.77
1750 92 100 107 128 137 151 165 171 178 192 205 218 243 268 291 315 326 381 1750 12.81 13.44 14.07 15.34 15.97 16.61 17.86 19.12 20.37 21.62 22.86 24.10 25.33 27.78 30.20 31.40 37.29 44.09 50.52
3500 154 167 180 215 230 255 277 289 300 322 344 365 407 446 484 521 539 624 3500 25.33 26.56 27.78 30.20 31.40 32.59 34.96 37.29 39.60 41.86 44.09 46.28 48.42 52.57 56.62 58.42 67.02 75.09 80.26
50 5 5 6 7 7 8 8 9 9 10 11 11 13 14 15 17 17 20 50 0.37 0.39 0.40 0.44 0.46 0.48 0.51 0.55 0.59 0.62 0.66 0.70 0.73 0.81 0.88 0.92 1.10 1.32 1.54
100 9 9 10 12 13 14 15 16 17 18 19 21 23 25 28 30 31 37 100 0.73 0.77 0.81 0.88 0.92 0.95 1.03 1.10 1.18 1.25 1.32 1.40 1.47 1.62 1.76 1.84 2.20 2.64 3.08
150 12 13 14 17 18 20 22 23 24 26 27 29 33 36 39 43 44 52 200 1.47 1.54 1.62 1.76 1.84 1.91 2.06 2.20 2.35 2.50 2.64 2.79 2.94 3.23 3.52 3.67 4.40 5.28 6.16
200 16 17 18 22 23 26 28 29 30 33 35 37 42 46 50 54 56 67 300 2.20 2.31 2.42 2.64 2.75 2.86 3.08 3.30 3.52 3.74 3.96 4.18 4.40 4.84 5.28 5.50 6.60 7.92 9.24
250 19 21 22 26 28 31 34 35 37 39 42 45 50 55 61 66 68 80 400 2.94 3.08 3.23 3.52 3.67 3.82 4.11 4.40 4.70 4.99 5.28 5.58 5.87 6.46 7.04 7.34 8.80 10.55 12.30
300 22 24 26 31 33 36 39 41 43 46 49 52 58 65 71 76 79 94 500 3.67 3.85 4.04 4.40 4.59 4.77 5.14 5.50 5.87 6.24 6.60 6.97 7.34 8.07 8.80 9.16 10.99 13.17 15.34
350 25 27 29 35 37 41 45 47 49 52 56 59 66 73 80 87 90 106 600 4.40 4.62 4.84 5.28 5.50 5.72 6.16 6.60 7.04 7.48 7.92 8.36 8.80 9.67 10.55 10.99 13.17 15.78 18.37
400 28 31 33 39 42 46 50 52 54 58 62 66 74 82 90 97 101 119 700 5.14 5.39 5.65 6.16 6.42 6.68 7.19 7.70 8.21 8.72 9.24 9.75 10.26 11.28 12.30 12.80 15.34 18.37 21.37
450 31 34 36 43 46 51 55 58 60 64 69 73 82 90 99 107 111 131 800 5.87 6.16 6.46 7.04 7.34 7.63 8.21 8.80 9.38 9.97 10.55 11.13 11.71 12.88 14.04 14.62 17.51 20.94 24.34
500 34 37 39 47 50 55 60 63 65 70 75 80 89 99 108 117 121 143 900 6.60 6.93 7.26 7.92 8.25 8.58 9.24 9.89 10.55 11.21 11.86 12.52 13.17 14.47 15.78 16.42 19.66 23.50 27.29
550 37 40 43 51 54 60 65 68 71 76 81 86 97 107 116 126 131 154 1000 7.34 7.70 8.07 8.80 9.16 9.53 10.26 10.99 11.72 12.44 13.17 13.89 14.62 16.06 17.51 18.22 21.80 26.03 30.20
600 39 43 46 54 58 64 70 73 76 82 87 93 104 114 125 135 140 165 1100 8.07 8.47 8.87 9.67 10.08 10.48 11.28 12.08 12.88 13.68 14.47 15.27 16.08 17.65 19.23 20.01 23.92 28.54 33.07
650 42 46 49 58 62 69 75 78 81 87 93 99 111 122 133 144 150 176 1200 8.80 9.24 9.67 10.55 10.99 11.42 12.30 13.17 14.04 14.91 15.77 16.64 17.51 19.23 20.94 21.80 26.03 31.02 35.90
700 45 48 52 62 66 73 79 83 86 92 99 105 118 130 142 153 159 187 1300 9.53 10.00 10.48 11.42 11.90 12.37 13.31 14.26 15.20 16.14 17.07 18.01 18.94 20.80 22.65 23.57 28.12 33.48 38.68
750 47 51 55 65 70 77 84 87 91 98 105 111 124 137 150 162 168 198 1400 10.26 10.77 11.28 12.30 12.80 13.31 14.33 15.34 16.35 17.36 18.37 19.37 20.37 22.37 24.35 25.33 30.20 35.90 41.41
800 50 54 58 69 73 81 89 92 96 103 110 117 131 145 158 171 177 208 1500 10.99 11.53 12.08 13.17 13.71 14.26 15.34 16.42 17.51 18.58 19.66 20.73 21.80 23.92 26.03 27.08 32.25 38.29 44.09
850 52 57 61 72 77 86 93 97 101 108 116 123 138 152 166 179 186 218 1600 11.71 12.30 12.88 14.04 14.62 15.20 16.35 17.50 18.66 19.80 20.94 22.08 23.22 25.47 27.71 28.82 34.29 40.64 46.71
900 55 59 64 76 81 90 97 101 105 113 121 129 144 159 173 187 194 228 1700 12.44 13.06 13.68 14.91 15.52 16.14 17.36 18.58 19.80 21.01 22.22 23.43 24.63 27.01 29.37 30.54 36.30 42.95 49.26
950 57 62 66 79 84 94 102 106 110 118 127 135 150 166 181 196 203 238 1800 13.17 13.82 14.47 15.78 16.42 17.07 18.37 19.66 20.94 22.22 23.50 24.77 26.03 28.54 31.02 32.25 38.29 45.22 51.75
1000 60 64 69 82 88 97 106 110 115 123 132 140 157 173 188 204 211 248 1900 13.89 14.58 15.27 16.64 17.32 18.01 19.37 20.73 22.08 23.43 24.77 26.10 27.43 30.06 32.66 33.95 40.25 47.44 54.17
1100 64 69 75 89 95 105 114 119 124 133 142 151 169 186 203 220 228 267 2000 14.62 15.34 16.06 17.51 18.22 18.94 20.37 21.80 23.22 24.63 26.03 27.43 28.82 31.57 34.29 35.63 42.18 49.62 56.52
1200 69 74 80 95 102 113 122 128 133 143 152 162 181 200 218 235 244 286 2100 15.34 16.10 16.86 18.37 19.12 19.87 21.37 22.86 24.35 25.82 27.29 28.75 30.20 33.07 35.90 37.29 44.09 51.75 58.79
1300 73 79 85 101 108 120 130 136 141 152 162 173 193 213 232 250 260 304 2200 16.06 16.86 17.65 19.23 20.01 20.80 22.36 23.92 25.47 27.01 28.54 30.06 31.57 34.56 37.49 38.94 45.96 53.83 60.98
1400 78 84 90 107 115 127 138 144 150 161 172 183 204 225 245 265 275 322 2300 16.79 17.61 18.44 20.09 20.91 21.73 23.36 24.98 26.59 28.19 29.78 31.37 32.93 36.03 39.07 40.57 47.81 55.86 63.08
1500 82 89 95 113 121 134 146 152 158 170 182 193 216 238 259 280 290 340 2400 17.51 18.37 19.23 20.94 21.80 22.65 24.34 26.03 27.71 29.37 31.02 32.66 34.29 37.49 40.64 42.18 49.62 57.83 65.10
1600 86 93 100 119 127 141 154 160 166 179 191 203 227 250 272 294 305 357 2500 18.22 19.12 20.01 21.80 22.68 23.57 25.33 27.08 28.82 30.54 32.25 33.95 35.63 38.94 42.18 43.77 51.40 59.74 67.02
1700 90 98 105 125 134 148 161 168 174 187 200 213 238 262 285 308 319 373 2600 18.94 19.87 20.80 22.65 23.57 24.49 26.31 28.12 29.92 31.71 33.48 35.23 36.96 40.38 43.71 45.34 53.15 61.59 68.84
1800 94 102 110 130 140 155 168 175 182 196 209 222 248 273 298 322 333 390 2700 19.66 20.62 21.58 23.50 24.45 25.40 27.29 29.16 31.02 32.87 34.69 36.50 38.29 41.80 45.22 46.89 54.85 63.38 70.57
1900 98 106 114 136 146 161 175 183 190 204 218 232 259 285 310 335 347 406 2800 20.37 21.37 22.36 24.35 25.33 26.31 28.26 30.20 32.12 34.02 35.90 37.76 39.60 43.20 46.71 48.42 56.52 65.10 72.19
2000 102 110 119 141 151 168 182 190 198 212 227 241 269 296 322 348 361 421 2900 21.09 22.12 23.14 25.19 26.21 27.22 29.23 31.23 33.21 35.16 37.09 39.01 40.89 44.59 48.17 49.92 58.15 66.75 73.70
2200 110 119 128 152 163 180 196 204 212 228 244 259 289 318 346 374 387 452 3000 21.80 22.86 23.92 26.03 27.08 28.13 30.20 32.25 34.29 36.30 38.28 40.25 42.18 45.97 49.62 51.40 59.74 68.33 75.09
2400 117 127 136 162 174 193 210 218 227 244 261 277 309 340 369 398 413 481 3100 22.51 23.61 24.70 26.87 27.95 29.03 31.16 33.27 35.36 37.43 39.46 41.48 43.46 47.32 51.05 52.86 61.29 69.84 76.38
2600 124 135 145 173 185 205 223 232 241 259 277 294 328 360 392 422 437 509 3200 23.22 24.35 25.47 27.71 28.82 29.92 32.12 34.29 36.43 38.55 40.63 42.69 44.72 48.66 52.45 54.29 62.79 71.27 77.54
2800 131 142 153 182 195 216 235 245 255 274 292 311 346 380 413 446 461 536 3300 23.92 25.09 26.24 28.54 29.68 30.82 33.07 35.29 37.49 39.66 41.79 43.90 45.96 49.98 53.83 55.69 64.25 72.63 78.57
3000 138 150 161 192 205 228 248 258 268 288 308 327 364 400 435 468 484 562 3400 24.63 25.82 27.01 29.37 30.54 31.71 34.02 36.30 38.55 40.76 42.95 45.09 47.20 51.29 55.19 57.07 65.66 73.90 79.48
3200 145 157 169 201 216 239 260 270 281 302 322 342 381 419 455 490 507 588 3600 26.03 27.29 28.54 31.03 32.25 33.48 35.90 38.28 40.64 42.95 45.22 47.44 49.62 53.84 57.83 59.74 68.33 76.20 80.90
3400 151 164 177 210 225 250 272 283 294 316 337 358 398 437 475 511 528 612 3700 26.73 28.02 29.30 31.85 33.10 34.36 36.83 39.27 41.67 44.02 46.33 48.60 50.81 55.08 59.11 61.03 69.60 77.22 81.41
3600 157 171 184 219 235 260 283 295 306 329 351 373 415 455 494 531 549 635 3800 27.43 28.75 30.06 32.66 33.95 35.23 37.76 40.24 42.69 45.09 47.44 49.74 51.99 56.30 60.36 62.29 70.81 78.15 81.77
3800 164 177 191 228 244 271 294 306 318 342 365 387 431 473 513 551 570 658 3900 28.12 29.48 30.82 33.48 34.79 36.10 38.68 41.21 43.71 46.15 48.54 50.87 53.15 57.51 61.59 63.52 71.96 78.98 81.98
4000 170 184 198 237 253 281 305 318 330 355 378 402 447 490 531 570 590 679 4000 28.82 30.20 31.57 34.29 35.63 36.96 39.59 42.18 44.72 47.20 49.62 51.99 54.29 58.69 62.79 64.72 73.06 79.72 82.04
4500 184 200 216 257 275 305 332 345 359 385 411 436 484 530 574 616 636 729 4200 30.20 31.64 33.07 35.90 37.29 38.68 41.41 44.09 46.71 49.26 51.75 54.18 56.52 60.98 65.10 67.02 75.09 80.90
5000 198 215 232 277 297 329 357 372 386 414 442 468 520 568 614 658 679 774 4400 31.57 33.07 34.56 37.50 38.94 40.38 43.20 45.96 48.66 51.28 53.83 56.30 58.69 63.18 67.29 69.18 76.89 81.68
5500 211 230 248 296 317 351 381 396 412 442 471 499 553 603 651 696 717 813 4600 32.93 34.49 36.03 39.08 40.57 42.05 44.97 47.81 50.58 53.26 55.86 58.37 60.78 65.29 69.35 71.20 78.43 82.02
6000 224 243 263 313 336 372 404 420 436 468 498 528 584 636 685 731 753 848 4800 34.29 35.90 37.49 40.64 42.18 43.71 46.71 49.62 52.45 55.19 57.83 60.37 62.79 67.29 71.27 73.06 79.72 81.92
6500 236 256 277 331 354 392 426 443 460 492 524 555 613 667 717 763 784 876 5000 35.63 37.30 38.94 42.18 43.77 45.34 48.42 51.40 54.29 57.07 59.74 62.30 64.72 69.18 73.06 74.77 80.74 81.34
7000 247 269 291 347 371 411 446 464 482 516 549 580 640 695 745 791 812 900 5200 36.96 38.68 40.37 43.71 45.34 46.95 50.10 53.14 56.08 58.90 61.59 64.15 66.57 70.96 74.71 76.32 81.47
7500 259 281 304 363 388 430 466 485 503 538 572 604 665 721 771 816 836 917 5400 38.29 40.05 41.79 45.22 46.89 48.54 51.75 54.85 57.83 60.67 63.38 65.94 68.33 72.63 76.20 77.69 81.91
8000 269 293 316 378 404 447 485 504 523 559 594 627 688 744 793 837 856 929 5600 39.60 41.41 43.20 46.71 48.42 50.10 53.37 56.52 59.53 62.39 65.10 67.64 70.00 74.18 77.54 78.89 82.04
8500 279 304 328 392 419 464 503 522 542 579 614 648 710 765 813 855 873 935 5800 40.89 42.76 44.59 48.18 49.92 51.64 54.96 58.15 61.19 64.05 66.75 69.27 71.58 75.60 78.71 79.91
9000 289 315 340 406 434 480 520 540 559 597 633 667 729 784 830 869 885 935 6000 42.18 44.09 45.96 49.63 51.40 53.15 56.52 59.74 62.79 65.66 68.33 70.81 73.06 76.89 79.72 80.73

*Values in the table above are for 6mm belt width. For other belt widths, those values should be multiplied by the width correction coefficient, Kb, shown in Table 28. *Because the durability in terms of hours decreases in the marked range, this range should be avoided whenever possible.
* The circumferential speed of pulley is 33(m/s)or more; a dynamic balance for the pulley is essential.
*Values in the table above are for 60mm belt width. For other belt widths, those values should be multiplied by the width correction coefficient, Kb, shown in Table 28.
3521 3522
 [Technical Data] Selection is easy with Timing Pulleys and Belts automatic calculation tool available at:
Selection of Timing Belts 6 -Transmission Capacity Table- http://fawos.misumi.jp/FA_WEB/pulley_us/

Table 40. Reference Transmission Capacity of S14M Ps -Belt Width 120mm- (kW) Table 41. Reference Transmission Capacity of MTS8M Ps -Belt Width 60mm- (kW) Table 42. Reference Transmission Capacity of P2M Ps -Belt Width 4mm- (W)
Number of Teeth of Number of Teeth of
No. of Teeth of Small Pulley 14 15 16 18 20 22 24 25 26 28 30 32 34 36 40 42 44 48
the Pulley(T) 28 30 32 34 36 40 42 44 48 50 56 60 64 72 84 the Pulley(T) 24 26 28 30 32 34 36 38 40 42 44 46 48 50 60 72 84
Rotary Pitch Dia. Rotary Pitch Dia. Rotary Speed of Diameter of the
8.91 9.55 10.19 11.46 12.73 14.01 15.28 15.92 16.55 17.83 19.10 20.37 21.65 22.92 25.46 26.74 28.01 30.56
Speed of
Small Pulley(rpm)
(mm)
124.78 133.69 142.60 151.52 160.43 178.25 187.17 196.08 213.90 222.82 249.55 267.38 285.21 320.86 374.33 Speed of
Small Pulley(rpm)
(mm)
61.12 66.21 71.30 76.39 81.49 86.58 91.67 96.77 101.86 106.95 112.05 117.14 122.23 127.32 152.79 183.35 213.90 Small Pulley(rpm) Pitch Circle(mm)

575 32.08 34.36 36.63 38.90 41.17 45.68 47.94 50.1954.67 56.91 63.58 68.00 72.39 81.10 93.92 50 1.35 1.47 1.58 1.70 1.82 1.93 2.05 2.17 2.27 2.37 2.46 2.56 2.66 2.75 3.21 3.75 4.27 100 2 2 2 2 3 3 3 3 3 4 4 5 5 6 7 7 8 9
690 38.45 41.17 43.88 46.59 49.29 54.67 57.36 60.0365.35 68.00 75.89 81.09 86.26 96.44 111.32 100 2.71 2.94 3.17 3.40 3.63 3.87 4.11 4.35 4.54 4.74 4.93 5.12 5.31 5.50 6.42 7.50 8.54 200 3 3 4 5 5 6 7 7 7 8 9 10 11 11 13 14 15 17
870 48.35 51.75 55.14 58.52 61.88 68.57 71.90 75.2081.77 85.03 94.68 101.02 107.27 119.49 136.99 400 6 6 7 8 9 10 11 12 13 14 15 16 17 19 22 24 25 28
200 4.91 5.32 5.73 6.15 6.57 6.99 7.42 7.85 8.20 8.54 8.89 9.22 9.56 9.89 11.52 13.41 15.23
1160 64.12 68.57 73.00 77.40 81.77 90.41 94.69 98.92
107.27 111.39 123.46 131.27 138.87 153.39 173.25 600 8 9 10 11 12 14 16 17 18 19 20 22 23 25 29 31 33 37
1750 95.20 101.57 107.84 114.03 120.11 131.93 137.68 154.11
143.29 159.32 174.00 182.96 191.21 205.36 220.00 300 6.91 7.48 8.06 8.64 9.23 9.83 10.43 11.04 11.52 12.00 12.47 12.94 13.41 13.87 16.12 18.71 21.20
800 10 11 12 13 16 18 19 20 21 23 25 27 29 31 36 38 41 46
3450 172.13 181.10 189.39 196.95 203.72 214.76 218.93 222.13
225.47 400 8.77 9.50 10.23 10.98 11.73 12.48 13.25 14.02 14.63 15.23 15.82 16.41 16.99 17.57 20.38 23.62 26.72
1000 12 13 14 16 18 20 23 24 25 27 30 32 34 37 42 45 48 54
20 1.12 1.20 1.28 1.36 1.44 1.60 1.68 1.76 1.92 2.00 2.24 2.40 2.56 2.88 3.36 500 10.53 11.40 12.29 13.18 14.08 14.99 15.92 16.85 17.57 18.28 18.99 19.69 20.38 21.07 24.40 28.22 31.88
40 2.24 2.40 2.56 2.72 2.88 3.20 3.36 3.52 3.84 4.00 4.48 4.80 5.12 5.76 6.71 1200 14 15 16 19 21 23 26 26 28 31 34 37 40 42 48 51 54 61
600 12.20 13.22 14.24 15.28 16.33 17.39 18.46 19.55 20.38 21.20 22.02 22.82 23.62 24.40 28.22 32.59 36.76
60 3.36 3.60 3.84 4.08 4.32 4.80 5.04 5.28 5.76 6.00 6.71 7.19 7.67 8.63 10.07 1400 16 17 18 21 24 26 29 30 32 35 38 41 44 47 54 57 61 68
700 13.80 14.95 16.11 17.29 18.48 19.69 20.91 22.15 23.09 24.01 24.92 25.82 26.72 27.60 31.88 36.76 41.39
80 4.48 4.80 5.12 5.44 5.76 6.39 6.71 7.03 7.67 7.99 8.95 9.59 10.23 11.51 13.42 1450 16 18 19 21 24 27 30 31 33 36 39 42 45 48 55 59 62 70
90 5.04 5.40 5.76 6.12 6.47 7.19 7.55 7.91 8.63 8.99 10.07 10.79 11.51 12.94 15.10 800 15.32 16.61 17.91 19.23 20.56 21.91 23.28 24.66 25.70 26.72 27.72 28.72 29.70 30.68 35.39 40.74 45.81 1500 16 18 19 22 25 28 31 32 34 37 40 43 46 50 57 60 64 71
100 5.60 6.00 6.39 6.79 7.19 7.99 8.39 8.79 9.59 9.99 11.19 11.99 12.79 14.38 16.77 900 16.79 18.21 19.64 21.09 22.56 24.05 25.56 27.10 28.22 29.34 30.44 31.52 32.59 33.65 38.77 44.57 50.04 1600 17 18 20 23 26 29 32 33 35 39 43 46 49 53 60 64 67 75
200 11.19 11.99 12.78 13.58 14.38 15.98 16.78 17.5719.17 19.96 22.35 23.94 25.53 28.71 33.47 1000 18.21 19.75 21.31 22.89 24.50 26.13 27.78 29.46 30.68 31.88 33.06 34.23 35.39 36.53 42.03 48.25 54.09 1750 19 20 22 25 28 31 35 37 38 42 45 49 53 56 64 68 71 79
300 16.78 17.97 19.17 20.36 21.56 23.94 25.14 26.3328.71 29.90 33.47 35.84 38.21 42.94 49.99
1100 19.57 21.24 22.92 24.64 26.38 28.14 29.94 31.76 33.06 34.35 35.62 36.87 38.10 39.32 45.19 51.80 57.98 1800 19 21 23 25 29 32 35 37 38 42 46 50 54 57 65 69 73 81
400 22.35 23.94 25.53 27.12 28.71 31.88 33.47 35.0538.21 39.79 44.51 47.65 50.78 57.01 66.27
1200 20.89 22.67 24.48 26.33 28.20 30.10 32.04 34.00 35.39 36.76 38.10 39.43 40.74 42.03 48.25 55.22 61.71 2000 21 22 24 28 31 34 38 40 42 46 50 54 58 62 70 74 78 87
500 27.92 29.90 31.88 33.86 35.84 39.79 41.76 43.7247.64 49.60 55.45 59.33 63.20 70.87 82.22
600 33.47 35.84 38.21 40.58 42.94 47.64 49.99 52.3457.00 59.33 66.27 70.87 75.43 84.47 97.76 1300 22.16 24.06 26.00 27.97 29.97 23.01 34.08 36.19 37.66 39.10 40.52 41.93 43.31 44.67 51.21 58.52 65.29 2400 24 26 28 32 36 40 44 46 48 52 56 61 65 70 80 85 89 99
700 39.00 41.76 44.51 47.26 49.99 55.45 58.17 60.8866.27 68.96 76.95 82.22 87.45 97.76 112.80 1400 23.38 25.40 27.46 29.56 31.69 33.86 36.07 38.33 39.87 41.39 42.89 44.36 45.81 47.24 54.09 61.71 68.73 3000 30 32 37 42 46 52 54 57 62 67 72 77 82 93 98 102 115
800 44.51 47.65 50.77 53.90 57.01 63.19 66.27 69.3475.43 78.46 87.45 93.36 99.21 110.68 127.26 1500 24.57 26.71 28.88 31.10 33.37 35.67 38.02 40.41 42.03 43.62 45.19 46.73 48.25 49.74 56.88 64.79 72.03 3600 35 38 43 48 53 59 62 64 70 76 82 88 94 106 112 118 131
900 49.99 53.51 57.00 60.49 63.97 70.87 74.29 77.7084.47 87.82 97.75 104.27 110.68 123.19 141.06 4000 38 41 47 52 58 64 67 70 76 82 88 94 101 114 120 127 140
1600 25.71 27.97 30.26 32.61 35.00 37.44 39.92 42.46 44.15 45.81 47.44 49.05 50.63 52.18 59.59 67.76 75.19
1000 55.45 59.33 63.19 67.04 70.87 78.46 82.22 85.9693.36 97.03 107.84 114.90 121.82 135.23 154.11 5000 48 55 61 68 75 78 82 89 96 104 111 118 132 139 147 162
1100 60.88 65.12 69.34 73.54 77.70 85.96 90.05 94.10
102.11 106.06 117.68 125.23 132.60 146.75 166.35 1700 26.82 29.19 31.60 34.07 36.59 39.16 41.78 44.46 46.22 47.95 49.64 51.31 52.95 54.56 62.23 70.63 78.22
6000 55 63 70 78 86 90 93 101 109 117 125 133 149 157 164 180
1200 66.27 70.87 75.43 79.97 84.47 93.36 97.76 102.11
110.68 114.90 127.26 135.23 142.97 157.70 177.67 1800 27.89 30.37 32.90 35.49 38.14 40.84 43.60 46.42 48.25 50.04 51.79 53.52 55.22 56.88 64.78 73.40 81.12
8000 76 86 95 105 109 114 123 132 141 150 158 176 184 192 209
1300 71.63 76.57 81.47 86.34 91.16 100.66 105.35 109.97
119.07 123.53 136.53 144.87 152.91 168.02 188.00 1900 28.92 31.51 34.16 36.87 39.65 42.48 45.38 48.35 50.23 52.08 53.90 55.68 57.43 59.15 67.27 76.07 83.89
1400 76.95 82.22 87.45 92.63 97.76 107.84 112.80 117.69
127.26 131.94 145.49 154.12 162.37 177.67 197.26 10000 91 101 111 122 127 132 142 151 161 170 178 196 203 210 224
2000 29.92 32.62 35.39 38.22 41.12 44.09 47.13 50.23 52.18 54.09 55.96 57.79 59.59 61.36 69.68 78.64 86.53
1500 82.22 87.82 93.36 98.85 104.27 114.90 120.11 125.23
135.23 140.10 154.11 162.94 171.32 186.69 205.36 12000 114 125 136 141 146 157 166 175 183 190 206 211 217 228
2100 30.89 33.70 36.57 39.53 42.55 45.65 48.83 52.08 54.09 56.05 57.97 59.86 61.71 63.51 72.03 81.12 89.05
1600 87.45 93.36 99.21 104.99 110.68 121.82 127.26 132.60
142.97 148.00 162.36 171.31 179.72 194.73 212.22 14000 125 136 148 153 158 168 176 185 190 196 208 214 220 232
1700 92.63 98.85 104.98 111.04 116.99 128.60 134.25 139.78
150.46 155.62 170.22 179.21 187.53 202.03 217.76 2200 31.82 37.74 37.73 40.80 43.95 47.19 50.50 53.90 55.96 57.97 59.95 61.88 63.77 65.62 74.30 83.50 91.43
*Because the durability in terms of hours decreases in the marked range, this range should be avoided whenever possible. For other belt widths, values above should be multiplied by the width correction coefficient shown in Table 28.
1800 97.76 104.27 110.68 116.99 123.19 135.23 141.06 157.70
146.75 162.94 177.67 186.59 194.73 208.45 221.89 2300 32.72 35.74 38.85 42.04 45.32 48.68 52.14 55.68 57.79 59.86 61.88 63.85 65.79 67.68 76.51 85.79
1900 102.83 109.62 116.29 122.85 129.27 141.70 147.69 153.51
164.65 169.95 184.67 193.43 201.26 213.94 224.54 2400 33.59 36.72 39.93 43.25 46.65 50.15 53.74 57.43 59.59 67.71 63.77 65.79 67.76 69.68 78.64 87.98 Table 43. Reference Transmission Capacity of P3M Ps -Belt Width 6mm- (W)
2000 107.85 114.90 121.82 128.61 135.23 147.99 154.12 160.05
171.31 176.63 191.21 199.69 207.11 218.44 225.62
2500 34.42 37.66 40.99 44.42 47.95 51.58 55.31 59.15 61.36 63.51 65.62 67.68 69.68 71.64 80.72 90.08 No. of Teeth of Small Pulley 10 12 14 15 16 18 20 22 24 25 26 28 30 32 34 36 40 42
2100 112.80 120.10 127.26 134.25 141.06 154.11 160.34 166.35
177.67 182.96 197.25 205.36 212.22 221.89 Rotary Speed of Diameter of the
2600 35.23 38.57 42.01 45.56 49.21 52.98 56.85 60.83 63.09 56.29 67.43 69.52 71.56 73.55 82.72 92.09 Pitch Circle(mm) 9.55 11.46 13.37 14.32 15.28 17.19 19.10 20.01 22.92 23.87 24.83 26.74 28.65 30.56 32.47 34.38 38.20 40.11
2200 117.69 125.23 132.60 139.78 146.75 160.05 166.35 172.40
183.70 188.93 202.79 210.39 216.56 224.26 Small Pulley(rpm)

2300 122.51 130.27 137.83 145.19 152.30 165.78 172.13 178.18

189.39 194.51 207.78 214.76 220.10 225.47 2700 36.00 39.44 43.00 46.67 50.45 54.34 58.36 62.48 64.78 67.02 69.21 71.33 73.40 75.41 84.66 100 4 5 6 6 7 8 9 10 12 12 13 14 15 17 19 20 22 23
2400 127.26 135.23 142.97 150.47 157.70 171.31 177.67 183.70
194.72 199.69 212.22 218.43 222.80 225.50 2800 36.75 40.29 43.96 47.74 51.65 55.68 59.83 64.11 66.45 68.73 70.94 73.09 75.19 77.23 86.53 200 8 11 12 13 14 16 18 20 23 24 25 28 31 34 36 38 45 47
2500 131.94 140.10 147.99 155.62 162.94 176.63 182.97 188.93
199.69 204.46 216.06 221.39 224.63 2900 37.46 41.11 44.89 48.79 52.82 56.99 61.28 65.70 68.08 70.39 72.64 74.82 76.94 78.99 88.34 400 14 17 20 22 24 27 32 35 39 41 43 47 51 56 61 65 75 79
2600 136.54 144.87 152.90 160.63 168.02 181.82 188.00 193.86
204.27 208.78 219.29 223.59 225.54 600 19 23 28 30 33 37 42 47 53 55 58 63 69 75 81 87 100 105
3000 38.15 41.90 45.78 49.80 53.96 58.26 62.70 67.27 69.68 72.03 74.30 76.50 78.64 80.71 90.08
2700 141.06 149.54 157.70 165.51 172.93 186.58 192.77 198.49
208.45 212.66 221.89 225.01 225.50 800 24 29 35 38 41 46 53 59 65 68 72 79 85 92 99 107 123 129
2800 145.50 154.12 162.36 170.23 177.67 191.21 197.26 202.79
212.22 216.06 223.83 225.62 3200 39.44 43.39 47.49 51.75 56.16 60.72 65.44 70.31 72.79 75.19 77.51 79.76 81.93 84.02
1000 28 35 41 44 48 55 62 69 77 81 84 92 100 109 118 126 144 151
2900 149.85 158.58 166.90 174.80 182.22 195.58 201.46 206.76
215.55 218.98 225.08 3400 40.61 44.76 49.08 53.57 58.23 63.07 68.07 73.25 75.78 78.22 80.58 82.85 85.04 87.14
1200 33 40 47 51 55 63 71 79 88 92 97 106 115 125 135 144 164 172
3000 154.12 162.94 171.31 179.21 186.59 199.69 205.36 210.39
218.43 221.39 225.62 3600 41.67 46.02 50.55 55.28 60.19 65.30 70.59 76.07 78.64 81.12 83.50 85.79 87.98 90.08
3100 158.29 167.19 175.58 183.46 190.76 203.53 208.95 213.66
220.86 223.28 1400 37 45 54 58 62 71 80 89 99 104 109 119 129 140 151 162 184 193
3800 42.63 47.17 51.92 56.88 62.04 67.42 73.00 78.78 81.39 83.89 86.29 88.58 90.76
3200 162.37 171.31 179.71 187.53 194.73 207.10 212.22 216.56
222.80 224.63 1450 38 46 55 59 64 72 82 90 102 106 111 122 133 144 155 166 188 197
4000 43.47 48.21 53.17 58.36 63.78 69.42 75.30 81.39 84.02 86.53 88.93 91.21
3300 166.35 175.32 183.70 191.44 198.49 210.39 215.16 219.09 224.25 225.42 1500 39 47 56 60 65 75 84 93 104 109 114 125 135 147 158 170 193 202
3400 170.23 179.21 187.53 195.16 202.03 213.37 217.76 221.22 225.20 225.63 4200 44.21 49.14 54.31 59.73 65.41 71.32 77.49 83.89 86.53 89.04 91.43
1600 41 49 59 63 68 79 88 98 109 114 120 131 142 154 166 178 202 212
3500 174.00 182.96 191.21 198.69 205.36 216.06 220.01 222.94 225.62 4400 44.85 49.96 55.35 61.00 66.92 73.11 79.57 86.29 88.93 91.43 1750 44 54 63 68 74 84 95 106 118 124 129 141 153 165 177 190 215 226
3600 177.67 186.59 194.72 202.04 208.45
218.43 221.89 224.26 4600 45.38 50.68 56.27 62.16 68.33 74.80 81.55 88.57 91.21 1800 55 65 70 75 86 97 108 120 126 131 143 155 168 181 193 219 230
3700 181.23 190.08 198.08 205.18 211.32
220.49 223.41 225.14
4800 45.81 51.29 57.09 63.21 69.64 76.37 83.42 90.76 2000 59 70 75 81 93 105 117 129 135 142 155 168 182 196 209 237 249
3800 184.67 193.43 201.26 208.12 213.94
222.21 224.54 225.58
5000 46.14 51.80 57.81 64.15 70.83 77.84 85.18 2400 68 81 87 93 107 121 134 148 155 162 177 192 207 223 238 270 284
3900 188.00 196.63 204.27 210.86 216.31
223.59 225.28 225.58
4000 191.21 199.69 207.10 213.38 218.44 224.63 225.62 5200 46.36 52.20 58.41 64.99 71.92 79.20 86.84 3000 95 103 112 125 142 158 175 183 191 208 226 243 261 279 316 332
4100 194.30 202.60 209.75 215.68 220.30 225.30 5400 46.48 52.51 65.72 72.90 80.46 3600 110 118 127 145 163 182 201 210 219 238 258 278 298 318 359 377
4200 197.26 205.36 212.22 217.76 221.89 225.62 5600 46.51 52.70 66.34 73.78 4000 119 128 138 158 176 196 216 226 236 257 278 299 321 342 386 405
4300 200.09 207.95 214.49 219.61 223.21 5000 141 152 163 186 208 231 255 267 278 302 326 351 375 399 448 470
5800 46.43 66.86 74.54
4400 202.79 210.39 216.56 221.22 224.26
6000 46.25 6000 174 187 212 238 264 291 304 317 343 370 397 424 451 505 530
4500 205.36 212.66 218.43 222.59 225.01
8000 232 263 293 324 356 371 387 418 448 479 508 538 597 627
4600 207.79 214.76 220.10 223.71 225.47 *Because the durability in terms of hours decreases in the marked range, this range should be
avoided whenever possible. 10000 308 342 377 413 430 446 480 512 545 574 604 663 696
4700 210.08 216.68 221.56 224.58 225.64 *Because the circumferential speed of pulley within the marked range is higher than 20m/sec, this
4800 212.22 218.43 222.80 225.20 range should be avoided whenever possible. 12000 349 386 423 460 477 495 530 562 594 620 646 699 734
*Values in the table above is for nominal belt width 600(60mm). For other belt widths, these values should
4900 214.22 220.00 223.83 225.55 14000 424 462 500 517 534 568 597 626 645 665 704 739
be multiplied by the width correction coefficient, Kb, shown in Table 28.
5000 216.06 221.39 224.63 225.63 *Because the durability in terms of hours decreases in the marked range, this range should be avoided whenever possible. For other belt widths, values above should be multiplied by the width correction coefficient shown in Table 28.
*Because the durability in terms of hours decreases in the marked range, this range should be avoided whenever possible.
*The circumferential speed of pulley is 33 (m/s) or more in the marked range; a dymanic balance for the pulley is essential.
*The marked range should be avoided whenever possible, as above two factors overlap here.*Values in the table above is for
nominal belt width 120 (120mm). For other belt widths, these values should be multiplied by the width correction coefficient in Table 28.
3523 3524
 [Technical Data] Selection is easy with Timing Pulleys and Belts automatic calculation tool available at:
Selection of Timing Belts 7 -Transmission Capacity Table- http://fawos.misumi.jp/FA_WEB/pulley_us/

Table 44. Reference Transmission Capacity of P5M Ps -Belt Width 10mm- (W) Table 45. Reference Transmission Capacity of P8M Ps -Belt Width 15mm- (kW)
No. of Teeth of Small Pulley 12 14 16 18 20 22 24 25 26 28 30 32 34 36 40 42 44 48 56 No. of Teeth of Small Pulley 20 22 24 26 28 30 32 34 36 38 40 44 48 50 56 60 64 72
Rotary Speed of Diameter of the Rotary Speed of Diameter of the
Pitch Circle (mm) 19.10 22.28 25.46 28.65 31.83 35.05 38.20 39.79 41.38 44.56 47.75 50.93 54.11 57.30 63.66 66.85 70.03 76.39 89.15 Pitch Circle (mm) 50.93 56.02 61.12 66.21 71.30 76.39 81.49 86.58 91.67 96.77 101.86 112.05 122.23 127.32 142.06 152.79 162.97 183.35
Small Pulley (rpm) Small Pulley (rpm)

100 23 26 31 35 41 46 52 55 58 64 70 76 81 86 103 110 118 133 158 100 0.16 0.17 0.19 0.21 0.23 0.26 0.31 0.41 0.44 0.48 0.51 0.56 0.60 0.63 0.70 0.74 0.78 0.89

200 46 53 63 72 81 92 104 109 115 126 138 151 164 177 205 220 235 267 316 200 0.32 0.35 0.39 0.42 0.45 0.50 0.59 0.69 0.78 0.85 0.91 0.99 1.07 1.14 1.23 1.35 1.40 1.57

400 77 90 106 122 138 155 173 182 192 211 231 251 272 294 337 361 385 434 514 400 0.65 0.71 0.77 0.84 0.90 0.95 1.09 1.25 1.37 1.48 1.59 1.72 1.86 1.94 2.16 2.30 2.43 2.71

600 105 123 144 165 188 211 235 247 259 284 310 337 365 394 452 482 513 577 684 600 0.96 1.06 1.16 1.25 1.35 1.45 1.53 1.70 1.86 2.02 2.17 2.37 2.55 2.66 2.95 3.12 3.30 3.66

800 131 153 179 205 234 262 291 306 322 353 385 417 451 485 556 592 629 706 837 800 1.29 1.41 1.54 1.67 1.80 1.93 2.06 2.18 2.31 2.51 2.69 3.02 3.16 3.27 3.64 3.83 4.08 4.75

1000 156 182 212 243 276 309 343 361 379 415 453 491 530 570 651 694 738 825 977 870 1.40 1.54 1.68 1.82 1.96 2.10 2.24 2.38 2.51 2.66 2.86 3.16 3.36 3.48 3.90 4.13 4.44 4.98

1200 179 209 244 280 316 355 394 414 435 476 518 561 605 650 742 790 838 937 1110 1000 1.61 1.77 1.93 2.09 2.25 2.41 2.57 2.73 2.89 2.99 3.16 3.64 3.84 4.00 4.47 4.78 5.09 5.71

1400 201 235 274 319 355 399 443 465 487 532 580 628 677 726 828 880 933 1040 1230 1160 1.86 2.05 2.24 2.42 2.61 2.79 2.98 3.16 3.35 3.53 3.84 4.08 4.44 4.62 5.17 5.52 6.48 7.28

1450 242 282 323 365 409 453 476 499 546 594 643 694 745 850 903 957 1070 1260 1200 1.93 2.12 2.31 2.51 2.70 2.89 3.07 3.27 3.46 3.60 3.82 4.22 4.59 4.78 5.34 5.71 6.08 7.52

1500 248 288 333 374 420 466 489 512 560 609 659 711 762 869 925 981 1090 1290 1400 2.25 2.45 2.70 2.94 3.15 3.37 3.59 3.80 4.03 4.25 4.47 4.90 5.34 5.55 6.20 6.62 7.04 8.68

1600 261 303 348 393 441 489 514 538 588 639 691 745 799 910 970 1030 1140 1350 1450 2.33 2.55 2.79 3.04 3.26 3.65 3.72 3.94 4.17 4.40 4.63 5.07 5.53 5.75 6.41 6.85 7.28 8.96

1750 278 325 372 420 471 522 548 575 628 683 738 795 852 970 1040 1100 1220 1430 1500 2.41 2.64 2.89 3.15 3.37 3.72 3.84 4.07 4.31 4.55 4.78 5.25 5.71 5.94 6.62 7.07 7.51 9.25

1800 332 380 430 481 532 559 586 640 696 753 810 868 989 1050 1110 1240 1460 1600 2.57 2.83 3.07 3.35 3.59 3.84 4.09 4.34 4.59 4.84 5.09 5.59 6.08 6.32 7.04 7.52 7.98 9.81

2000 360 412 465 520 576 605 633 691 751 812 874 937 1060 1130 1200 1330 1570 1750 2.81 3.08 3.36 3.64 3.92 4.20 4.47 4.74 5.01 5.28 5.56 6.09 6.63 6.88 7.68 8.17 8.70 10.6

2400 413 472 532 595 658 691 723 789 857 925 992 1060 1210 1280 1350 1500 2030 1800 2.89 3.18 3.72 3.75 4.03 4.31 4.59 4.87 5.15 5.43 5.71 6.26 6.80 7.07 7.86 8.38 8.90 10.9

3000 557 628 701 775 812 850 926 1000 1080 1150 1240 1400 1485 1570 1730 2120 2000 3.20 3.52 4.01 4.15 4.47 4.78 5.09 5.40 5.71 6.01 6.32 6.93 7.52 7.81 8.68 9.24 9.81 11.9

3600 638 719 801 883 925 966 1050 1140 1230 1310 1400 1580 1670 1760 1940 2250 2400 3.84 4.22 4.59 4.97 5.34 5.71 6.08 6.44 6.80 7.16 7.52 8.22 9.05 9.24 9.86 10.9 11.5 13.8

4000 776 865 953 997 1040 1130 1220 1320 1450 1500 1690 1785 1880 2060 2380 3000 4.63 5.20 5.62 6.02 6.52 6.81 7.32 7.76 8.22 8.71 9.02 9.84 10.7 11.1 12.2 12.6 12.9 14.6

5000 911 1010 1110 1160 1210 1320 1420 1520 1620 1720 1920 2010 2110 2300 2610 3600 5.82 6.34 6.75 7.27 7.67 8.17 8.65 9.14 9.72 10.0 10.8 11.7 12.2 13.1 13.9 13.9 15.3

6000 1140 1260 1310 1370 1480 1580 1690 1790 1900 2100 2190 2290 2460 2720 4000 7.06 7.48 8.14 8.46 9.00 9.60 10.0 10.7 11.0 11.7 12.7 13.2 14.0 14.7 14.9 15.8

8000 1490 1550 1600 1720 1830 1930 2020 2120 2270 2330 2400 2480 2480 5000 8.81 9.60 10.2 10.7 11.3 11.7 12.4 12.8 13.6 14.5 14.8 15.7

10000 1710 1760 1860 1940 2020 2080 2130 2170 2160 2150 2040 6000 10.2 11.2 11.9 12.3 13.0 13.2 14.1 14.5 14.9 15.8 16.0

12000 1770 1810 1880 1910 1940 1920 1900

*Because the durability in terms of hours decreases in the marked range, this range should be avoided whenever possible. For other belt widths, values above should be multiplied by the width correction coefficient shown in Table 28.
* The circumferential speed of pulley is 33(m/s)or more; a dynamic balance for the pulley is essential.
14000 1750 1760 1710 1660

*Because the durability in terms of hours decreases in the marked range, this range should be avoided whenever possible. For other belt widths, values above should be multiplied by the width correction coefficient shown in Table 28.

3525 3526
 [Technical Data] Selection is easy with Timing Pulleys and Belts automatic calculation tool available at:
Selection of Timing Belts 8 -Transmission Capacity Table- http://fawos.misumi.jp/FA_WEB/pulley_us/

Table 46. Reference Transmission Capacity of UP5M Ps -Belt Width 10mm- (W) Table 47. Reference Transmission Capacity of UP8M Ps -Belt Width 15mm- (kW)
No. of Teeth of Small Pulley 12 14 16 18 20 22 24 26 28 30 32 36 40 44 48 50 60 72 No. of Teeth of Small Pulley 20 22 24 26 28 30 32 34 36 38 40 44 48 50 56 60 64 72
Rotary Speed of Diameter of the Rotary Speed of Diameter of the
Pitch Circle (mm) 19.10 22.28 25.46 28.65 31.83 35.01 38.20 41.38 44.56 47.75 50.93 57.30 63.66 70.03 76.39 79.58 95.49 114.59 Pitch Circle (mm) 50.93 56.02 61.12 66.21 71.30 76.39 81.49 86.58 91.67 96.77 101.86 112.05 122.23 127.32 142.60 152.79 162.97 183.35
Small Pulley (rpm) Small Pulley (rpm)

20 10 12 15 17 19 21 24 26 29 31 34 39 45 51 58 61 78 101 20 0.11 0.12 0.13 0.14 0.15 0.17 0.18 0.19 0.20 0.21 0.23 0.25 0.28 0.29 0.33 0.36 0.40 0.46

40 19 23 28 32 36 40 45 49 54 59 64 74 85 96 108 114 147 187 40 0.19 0.21 0.24 0.26 0.28 0.30 0.33 0.36 0.38 0.40 0.42 0.47 0.52 0.55 0.62 0.67 0.73 0.84

60 27 32 39 45 50 56 63 69 76 83 90 104 119 135 152 161 206 267 60 0.27 0.31 0.34 0.37 0.40 0.44 0.47 0.50 0.53 0.56 0.60 0.67 0.74 0.77 0.89 0.96 1.04 1.20

100 41 50 60 69 78 88 97 107 118 128 139 162 185 210 236 249 321 420 100 0.43 0.48 0.52 0.57 0.62 0.67 0.71 0.77 0.82 0.88 0.93 1.03 1.14 1.20 1.38 1.50 1.62 1.87

200 76 92 111 128 145 162 180 198 215 237 257 298 342 388 436 460 592 774 200 0.76 0.84 0.93 1.01 1.10 1.19 1.28 1.37 1.46 1.57 1.69 1.85 2.06 2.16 2.48 2.70 2.93 3.40

400 141 170 206 236 267 299 332 366 401 437 474 550 631 715 804 849 1092 1430 300 1.06 1.17 1.29 1.41 1.54 1.66 1.78 1.92 2.05 2.18 2.29 2.59 2.88 3.03 3.48 3.79 4.11 4.79

500 172 207 251 287 325 364 405 446 488 532 577 670 769 871 979 1034 1330 1741 400 1.32 1.47 1.62 1.78 1.93 2.09 2.25 2.41 2.59 2.75 2.92 3.28 3.65 3.84 4.41 4.81 5.22 6.08

600 202 243 295 338 382 428 475 524 574 625 678 788 903 1024 1151 1216 1563 2045 500 1.57 1.75 1.93 2.12 2.30 2.50 2.69 2.89 3.09 3.30 3.50 3.93 4.37 4.60 5.30 5.78 6.29 7.32

800 260 314 380 436 492 552 613 675 740 806 875 1016 1164 1320 1483 1567 2016 2637 600 1.81 2.01 2.22 2.44 2.65 2.88 3.10 3.33 3.57 3.80 4.05 4.54 5.06 5.32 6.14 6.71 7.29 8.51

1000 316 382 463 531 600 672 747 822 901 982 1065 1238 1418 1609 1806 1909 2454 3210 700 2.04 2.26 2.50 2.75 2.99 3.24 3.50 3.75 4.02 4.29 4.57 5.13 5.72 6.02 6.95 7.59 8.26 9.65

1200 376 453 550 630 713 799 887 977 1070 1167 1265 1470 1685 1910 2146 2266 2913 3811 800 2.25 2.51 2.77 3.04 3.31 3.59 3.87 4.17 4.46 4.76 5.07 5.70 6.35 6.69 7.73 8.45 9.20 10.75

1400 436 526 637 730 826 924 1026 1132 1240 1351 1466 1702 1951 2212 2484 2625 3372 4409 900 2.46 2.74 3.03 3.32 3.61 3.92 4.24 4.55 4.88 5.21 5.55 6.25 6.97 7.34 8.48 9.29 10.11 11.83

1450 544 658 755 854 957 1061 1171 1283 1397 1516 1760 2017 2288 2569 2714 3488 4559 1000 2.66 2.96 3.28 3.58 3.91 4.24 4.58 4.93 5.28 5.64 6.02 6.78 7.56 7.96 9.22 10.08 10.99 12.88

1500 561 681 780 883 988 1098 1209 1324 1444 1566 1819 2084 2364 2654 2803 3601 4707 1100 2.86 3.19 3.52 3.87 4.23 4.59 4.95 5.33 5.71 6.10 6.51 7.32 8.18 8.62 9.99 10.93 11.91 13.97

1600 599 724 831 940 1052 1169 1287 1410 1537 1667 1935 2218 2514 2823 2984 3833 5007 1200 3.06 3.42 3.78 4.15 4.53 4.92 5.31 5.72 6.13 6.55 6.98 7.87 8.79 9.26 10.74 11.76 12.83 15.05

1750 652 790 907 1025 1147 1275 1405 1539 1677 1817 2111 2420 2743 3080 3254 4178 5455 1300 3.26 3.64 4.02 4.42 4.82 5.24 5.67 6.10 6.54 6.99 7.45 8.40 9.40 9.90 11.49 12.59 13.73 16.11

1800 813 931 1053 1179 1309 1443 1582 1724 1868 2171 2486 2820 3165 3344 4293 5605 1400 3.46 3.86 4.27 4.69 5.12 5.57 6.01 6.47 6.95 7.43 7.92 8.94 9.99 10.53 12.23 13.40 14.62 17.17

2000 902 1032 1169 1309 1453 1601 1754 1912 2071 2407 2757 3124 3508 3707 4687 6201 1450 3.55 3.96 4.39 4.82 5.26 5.72 6.18 6.66 7.15 7.64 8.15 9.20 10.28 10.84 12.59 13.80 15.06 17.69

2400 1068 1222 1386 1552 1720 1897 2077 2262 2453 2849 3261 3695 4146 4378 5485 7293 1500 3.65 4.07 4.51 4.95 5.41 5.87 6.35 6.85 7.35 7.85 8.38 9.46 10.58 11.15 12.95 14.20 15.50 18.22

3000 1517 1714 1918 2130 2348 2570 2798 3034 3520 4027 4559 5108 5389 6614 8885 1600 3.83 4.27 4.73 5.21 5.69 6.18 6.69 7.21 7.74 8.28 8.84 9.98 11.16 11.77 13.68 15.00 16.37 19.26

3600 1794 2029 2272 2519 2774 3039 3307 3584 4151 4743 5361 5996 6320 7629 10250 1750 4.11 4.59 5.08 5.59 6.12 6.64 7.19 7.75 8.32 8.91 9.50 10.74 12.03 12.69 14.75 16.19 17.68 20.81

4000 2245 2513 2785 3067 3358 3655 3956 4577 5226 5895 6583 6932 8040 11069 1800 4.19 4.69 5.20 5.71 6.25 6.79 7.35 7.92 8.52 9.11 9.72 11.00 12.31 12.99 15.10 16.58 18.11 21.32

5000 2747 3072 3404 3747 4090 4446 4807 5542 6301 7066 7843 8229 9048 2000 4.56 5.09 5.65 6.21 6.79 7.39 8.00 8.63 9.28 9.93 10.61 11.99 13.44 14.18 16.51 18.14 19.82 23.37

6000 3217 3585 3969 4359 4757 5154 5559 6376 7185 7995 8776 9159 2400 5.25 5.87 6.51 7.17 7.85 8.54 9.27 10.00 10.75 11.52 12.31 13.95 15.65 16.53 19.27 21.20 23.18 27.38

8000 5002 5455 5908 6361 6795 7624 8366 8993 9465 9619 2800 5.91 6.61 7.34 8.09 8.87 9.66 10.48 11.32 12.18 13.06 13.97 15.84 17.81 18.81 21.97 24.19 26.49 31.35

10000 6313 6747 7156 7518 8072 8349 8253 3000 6.22 6.97 7.75 8.54 9.37 10.21 11.09 11.97 12.89 13.82 14.79 16.78 18.87 19.94 23.31 25.68 28.13 33.30

12000 6824 7142 7359 7475 7316 3600 6.93 7.79 8.66 9.56 10.49 11.45 12.44 13.46 14.50 15.57 16.66 18.94 21.33 22.56 26.44 29.15 31.97 37.94

14000 6848 6882 6730 4000 7.36 8.29 9.20 10.18 11.18 12.20 13.27 14.36 15.48 16.63 17.81 20.27 22.85 24.18 28.37 31.30 34.36 40.81

*Because the durability in terms of hours decreases in the marked range, this range should be avoided whenever possible. For other belt widths, values above should be multiplied by the width correction coefficient shown in Table 28. 5000 8.29 9.34 10.41 11.52 12.68 13.87 15.10 16.38 17.68 19.02 20.40 23.26 26.29 27.84 32.75 36.20

6000 9.05 9.05 11.41 12.65 13.95 15.28 16.66 18.08 19.55 21.06 22.61 25.85 29.24 31.02 36.56 40.46

*Because the durability in terms of hours decreases in the marked range, this range should be avoided whenever possible. For other belt widths, values above should be multiplied by the width correction coefficient shown in Table 28.
* The circumferential speed of pulley is 33(m/s)or more; a dynamic balance for the pulley is essential.

3527 3528
 [Technical Data] Selection is easy with Timing Pulleys and Belts automatic calculation tool available at:
Selection of Timing Belts 9 -Transmission Capacity Table- http://fawos.misumi.jp/FA_WEB/pulley_us/

Table 48. Reference Transmission Capacity of T5 Ps -Belt Width 10mm- (W) Table 49. Reference Transmission Capacity of T10 Ps - Belt Width 10mm- (W)
No. of Teeth of Small Pulley 12 14 16 18 20 22 24 28 30 No. of Teeth of Small Pulley 12 14 16 18 20 22 24 26 28 30 32 36 40 44 48
Diameter of the Diameter of the
Rotary Speed of Pitch Circle(mm) 19.10 22.28 25.46 28.65 31.83 35.01 38.20 44.56 47.75 Rotary Speed of Pitch Circle(mm) 38.20 44.56 50.93 57.30 63.66 70.03 76.39 82.76 89.12 95.49 101.86 114.59 127.32 140.06 152.79
Small Pulley(rpm) Small Pulley(rpm)
1160 98.5 114.9 131.3 147.7 164.1 180.5 196.9 229.7 246.1 870 254.9 297.4 339.9 382.4 424.9 467.4 509.9 552.4 594.9 637.4 679.8 764.8 849.8 938.8 1019.8

1750 134.3 156.7 179.1 201.5 223.9 246.3 268.7 313.5 335.9 1160 321.2 374.8 428.3 481.8 535.4 588.9 642.4 696.0 749.5 803.0 856.6 963.7 1070.7 1177.8 1284.9

3500 222.5 259.6 296.7 333.7 370.8 407.9 445.0 519.1 556.2 1750 438.3 511.3 584.4 657.4 730.5 803.5 876.6 949.6 1022.7 1095.7 1168.8 1314.9 1461.0 1607.1 1753.2

100 10.7 12.4 14.2 16.0 17.8 19.5 21.3 24.9 26.6 3500 725.8 846.8 967.8 1088.7 1209.7 1330.6 1451.6 1572.6 1693.6 1814.6 1935.5 2177.5 2419.4 2661.4 2903.3

200 20.8 24.3 27.7 31.2 34.7 38.2 41.6 48.6 52.0 100 34.8 40.6 46.4 52.1 57.9 63.7 69.5 75.3 81.1 86.9 92.7 104.3 115.9 127.5 139.1

300 30.5 35.6 40.7 45.7 50.8 55.9 61.0 71.2 76.2 200 67.9 79.2 90.5 101.9 113.2 124.5 135.8 147.1 158.4 169.8 181.1 203.7 226.3 249.0 271.6

400 39.7 46.4 53.0 59.6 66.2 72.9 79.5 92.7 99.4 300 99.5 116.1 132.7 149.3 165.8 182.4 199.0 215.6 232.2 248.8 265.3 298.5 331.7 364.9 398.0

500 48.6 56.7 64.8 72.9 81.0 89.1 97.2 113.4 121.5 400 129.7 151.3 172.9 194.5 216.1 237.7 259.4 281.0 302.6 324.2 345.8 389.0 432.3 475.5 518.7

600 57.0 66.5 76.0 85.6 95.1 104.6 114.1 133.1 142.6 500 158.5 184.9 211.3 237.8 264.2 290.6 317.0 343.4 369.8 396.3 422.7 475.5 528.3 581.2 634.0

700 65.1 76.0 86.8 97.7 108.6 119.4 130.3 152.0 162.8 600 186.1 217.1 248.1 279.1 310.1 341.1 372.2 403.2 434.2 465.2 496.2 558.2 620.3 682.3 744.3

800 72.9 85.0 97.2 109.3 121.5 133.6 145.8 170.1 182.2 700 212.5 247.9 283.3 318.7 354.2 389.6 425.0 460.4 495.8 531.2 566.6 637.5 708.3 779.1 850.0

900 80.3 93.7 107.1 120.5 133.9 147.3 160.7 187.5 200.9 800 237.8 277.5 317.1 356.7 396.4 436.0 475.6 515.3 554.9 594.5 634.2 713.4 792.7 872.0 951.3

1000 87.5 102.1 116.7 131.3 145.9 160.5 175.0 204.2 218.8 900 262.1 305.8 349.5 393.2 436.9 480.6 524.3 568.0 611.7 655.3 699.0 786.4 873.8 961.2 1048.6

1100 94.4 110.2 125.9 141.6 157.4 173.1 188.9 220.3 236.1 1000 285.5 333.1 380.7 428.3 475.9 523.5 571.1 618.7 666.2 713.8 761.4 856.6 951.8 1047.0 1142.1

1200 101.1 117.9 134.8 151.6 168.5 185.3 202.2 235.9 252.7 1100 308.1 359.4 410.8 462.1 513.5 564.8 616.2 667.5 718.8 770.2 821.5 924.2 1026.9 1129.6 1232.3

1300 107.5 125.5 143.4 161.3 179.2 197.2 215.1 250.9 268.9 1200 329.8 384.8 439.8 494.7 549.7 604.7 659.7 714.6 769.6 824.6 879.6 989.5 1099.4 1209.4 1319.3

1400 113.8 132.8 151.7 170.7 189.7 208.6 227.6 265.5 284.5 1300 350.9 409.4 467.8 526.3 584.8 644.3 701.4 760.2 818.7 877.2 935.7 1052.6 1169.6 1286.5 1403.5

1500 119.9 139.8 159.8 179.8 200.0 219.2 239.7 279.7 299.7 1400 371.3 433.1 495.0 556.9 618.8 680.6 742.5 804.4 866.3 928.1 990.0 1113.8 1237.5 1361.3 1485.0

1600 125.8 146.7 167.7 188.6 209.6 230.6 251.5 293.4 314.4 1500 391.0 456.2 521.4 586.6 651.7 716.9 782.1 847.3 912.4 977.6 1042.8 1173.1 1303.5 1433.8 1564.2

1700 131.5 153.4 175.4 197.3 219.2 241.1 263.0 306.9 328.8 1600 410.3 478.7 547.1 615.4 683.8 752.2 820.6 889.0 957.4 1025.7 1094.1 1230.9 1367.7 1504.4 1641.2

1800 137.1 160.0 182.9 205.7 228.6 251.4 274.3 320.0 342.8 1700 429.1 500.6 572.1 643.6 715.1 786.6 858.1 929.6 1001.2 1072.7 1144.2 1287.2 1430.2 1573.3 1716.3

1900 142.6 166.4 190.2 214.0 237.7 261.5 285.3 332.8 356.6 1800 447.4 522.0 596.5 671.1 745.7 820.2 894.8 969.4 1043.9 1118.5 1193.1 1342.2 1411.3 1640.5 1781.6

2000 148.0 172.7 197.4 222.1 246.7 271.4 296.1 345.4 370.1 1900 465.4 542.9 620.5 698.0 775.6 853.1 930.7 1008.3 1085.8 1163.4 1240.9 1396.1 1551.2 1706.3 1861.4

2200 158.6 185.0 211.4 237.8 264.3 290.7 317.8 370.0 396.4 2000 483.0 563.5 643.9 724.4 804.9 885.4 965.9 1046.4 1126.9 1207.4 1287.9 1448.9 1609.9 1770.9 1931.8

2400 168.8 196.9 225.1 253.2 281.4 309.5 337.6 393.9 422.0 2200 517.3 603.5 689.7 776.0 862.2 948.4 1034.6 1120.8 1207.1 1293.3 1379.5 1551.9 1724.4 1896.8 2069.2

2600 178.8 208.7 238.5 268.3 298.1 327.9 357.7 417.3 447.1 2400 550.7 642.5 734.3 826.1 917.9 1009.7 1101.4 1193.8 1285.0 1376.8 1468.6 1652.2 1835.8 2019.3 2202.9

2800 188.7 220.2 251.6 283.1 314.5 346.0 377.4 440.4 471.8 2600 583.5 680.7 777.9 875.2 972.4 1069.7 1166.9 1264.1 1361.4 1458.6 1555.9 1750.4 1944.9 2139.3 2333.8

3000 198.5 231.6 264.6 297.7 330.8 363.9 397.0 463.1 496.2 2800 615.7 718.3 820.9 923.5 1026.1 1128.7 1231.3 1333.9 1436.6 1539.2 1641.8 1847.0 2052.3 2257.5 2462.7

3200 208.2 242.8 277.5 312.2 346.9 381.6 416.3 485.7 520.4 3000 755.4 863.4 971.3 1079.2 1187.1 1295.0 1402.9 1510.9 1618.8 1726.7 1942.5 2158.4 2374.2 2590.1

3400 217.7 254.0 290.3 326.6 362.9 399.2 435.5 508.0 544.3 3200 792.2 905.4 1018.6 1131.8 1244.9 1358.1 1471.2 1584.5 1697.6 1810.8 2037.2 2263.5 2489.9 2716.2

3600 227.2 265.1 303.0 340.8 378.7 416.6 454.4 530.2 568.1 3400 828.7 947.1 1065.5 1183.8 1302.2 1420.6 1539.0 1657.4 1775.8 1894.2 2130.9 2367.7 2604.5 2841.2

3800 236.6 276.0 315.5 354.9 394.3 433.8 473.2 552.1 591.5 3600 864.8 988.4 1111.9 1235.4 1358.9 1482.5 1606.0 1729.6 1853.2 1976.7 2223.8 2470.9 2718.0 2965.1

4000 245.8 286.8 327.7 368.7 409.7 450.7 491.6 573.6 614.5 3800 900.5 1029.1 1157.7 1286.4 1415.0 1543.6 1672.2 1800.9 1929.6 2058.2 2315.5 2572.8 2830.0 3087.3

4200 254.8 297.3 339.7 382.2 424.7 467.2 509.6 594.6 637.0 4000 1069.2 1202.8 1336.5 1470.0 1603.7 1737.3 1871.1 2004.7 2138.4 2405.7 2673.0 2940.3 3207.6

4400 263.5 307.4 351.4 395.3 439.2 483.1 527.1 614.9 658.8 4200 1108.3 1246.9 1385.4 1523.9 1662.4 1800.9 1939.6 2078.1 2216.7 2493.7 2770.8 3047.9 3325.0

4600 271.9 317.2 362.5 407.8 453.1 498.4 543.7 634.4 679.7 4400 1146.2 1289.5 1432.8 1576.0 1719.2 1862.5 2005.9 2149.2 2292.5 2579.0 2865.6 3152.1 3438.7

4800 279.7 326.4 373.0 419.6 466.2 512.8 559.5 652.7 699.3 4600 1182.5 1330.3 1478.1 1625.8 1773.6 1921.4 2069.4 2217.2 2365.0 2660.6 2956.3 3251.9 3547.5

5000 287.0 334.8 382.7 430.5 478.3 526.2 574.0 669.7 717.5 4800 1216.7 1368.8 1520.9 1672.8 1824.9 1976.9 2129.2 2281.3 2433.4 2737.6 3041.8 3345.9 3650.1

5500 402.2 452.4 502.7 553.0 603.2 703.8 754.1 5000 1248.3 1404.3 1560.4 1716.2 1872.2 2028.3 2184.5 2340.6 2496.6 2808.7 3120.8 3432.8 3744.9

6000 412.1 463.6 515.1 566.6 618.1 721.1 772.6 5200 1276.7 1436.3 1595.9 1755.2 1914.8 2074.4 2234.2 2393.8 2553.4 2872.6 3191.8 3510.9 3830.1

6500 408.2 459.2 510.2 561.2 612.2 714.3 765.3 5400 1301.3 1463.9 1626.6 1789.0 1951.6 2114.2 2277.2 2439.9 2602.5 2927.8 3253.2 3578.5 3903.8

7000 385.3 433.5 481.7 529.8 578.0 674.3 722.5 5600 1321.2 1486.4 1651.5 1816.4 1981.5 2146.7 2312.2 2477.3 2642.5 2972.8 3303.1 3633.4 3963.7

7500 337.7 379.9 422.1 464.3 506.6 591.0 633.2 5800 1335.8 1502.8 1669.8 1836.4 2003.4 2170.3 2337.7 2504.7 2671.7 3005.6 3339.6 3673.5 4007.5

8000 290.8 323.1 355.5 387.8 452.4 484.7 6000 1344.2 1512.2 1680.2 1847.8 2015.8 2184.3 2352.3 2520.3 2688.3 3024.4 3360.4 3696.5 4032.5

8500 157.7 175.3 192.8 210.3 245.4 262.9 *Avoiding the marked ranges is recommended as endurance time is shorten
*Balance the traveling speed as wind velocity of pulley in the marked range reaches more than 33 (m/s)
*Avoiding the marked ranges is recommended as endurance time is shorten
* The above table shows values for the nominal width 10 (10mm). Multiply a value in the table by correction coefficient Kb in the table 28 for other widths. *The above table shows values for the nominal width 10 (10mm). Multiply a value in the table by correction coefficient Kb in the table 28 for other widths.

3529 3530
 [Technical Data] Selection is easy with Timing Pulleys and Belts automatic calculation tool available at:
Selection of Timing Belts 10 -Transmission Capacity Table- http://fawos.misumi.jp/FA_WEB/pulley_us/

Table 50. Reference Transmission Capacity of 2GT Ps -Belt Width 4mm- (W) Table 51. Reference Transmission Capacity of 3GT Ps -Belt Width 6mm- (W)
No. of Teeth of Small Pulley 12 14 16 18 20 22 24 26 28 30 32 36 40 44 48 50 60 72 No. of Teeth of Small Pulley 12 14 16 18 20 22 24 26 28 30 32 36 40 48 54 60 72 80
Diameter of the Diameter of the
Rotary Speed of Pitch 7.64 8.91 10.19 11.46 12.73 14.01 15.28 16.55 17.83 19.10 20.37 22.92 25.46 28.01 30.56 31.83 38.20 45.84 Rotary Speed of Pitch 11.46 13.37 15.28 17.19 19.10 21.01 22.92 24.83 26.74 28.65 30.56 34.38 38.20 45.84 51.57 57.30 68.75 76.39
Small Pulley(rpm) Circle(mm) Small Pulley(rpm) Circle(mm)

20 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.7 1.9 2.2 2.5 2.6 3.4 4.0 20 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 5.9 6.4 6.9 7.8 8.7 10.5 11.8 13.1 15.7 17.4

40 0.8 1.0 1.1 1.3 1.5 1.7 1.8 2.0 2.2 2.4 2.7 3.1 3.6 4.1 4.6 4.9 6.3 7.6 40 3.6 4.5 5.5 6.4 7.3 8.2 9.1 10.0 10.9 11.8 12.6 14.3 16.0 19.3 21.7 24.2 28.9 32.0

60 1.1 1.4 1.6 1.8 2.1 2.3 2.6 2.9 3.2 3.5 3.8 4.4 5.1 5.8 6.6 7.0 9.1 10.9 60 5.0 6.4 7.7 9.0 10.3 11.6 12.9 14.2 15.4 16.7 17.9 20.4 22.8 27.5 30.9 34.4 41.1 45.5

100 1.7 2.1 2.4 2.8 3.2 3.6 4.0 4.5 4.9 5.4 5.9 6.9 8.0 9.1 10.3 11.0 14.3 17.2 100 7.6 9.7 11.8 13.9 15.9 18.0 19.9 21.9 23.9 25.9 27.8 31.6 35.3 42.6 48.0 53.4 63.8 70.6

200 3.0 3.6 4.3 5.0 5.7 6.4 7.2 8.0 8.8 9.7 10.6 12.5 14.5 16.6 18.9 20.1 26.4 31.7 200 13.1 16.9 20.8 24.6 28.2 32.0 35.6 39.2 42.8 46.4 49.9 56.8 63.6 76.8 86.5 96.1 114.8 127.0

300 4.2 5.0 5.9 6.9 7.9 8.9 10.0 11.1 12.3 13.6 14.9 17.6 20.4 23.5 26.8 28.5 37.7 45.3 300 17.7 23.2 28.7 34.1 39.2 44.6 49.6 54.8 59.9 65.0 69.8 79.6 89.2 107.7 121.4 134.8 161.0 178.1

400 5.2 6.3 7.4 8.6 9.9 11.2 12.6 14.1 15.6 17.2 18.8 22.3 26.0 30.0 34.3 36.5 48.5 58.2 400 21.9 28.9 35.9 42.8 49.4 56.3 62.7 69.3 75.7 82.2 88.4 100.9 113.0 136.5 153.9 171.0 204.1 225.7

500 6.1 7.4 8.8 10.2 11.8 13.4 15.1 16.8 18.7 20.6 22.6 26.8 31.4 36.2 41.4 44.1 58.8 70.6 500 25.6 34.2 42.6 51.0 58.9 67.2 74.9 82.9 90.6 98.5 105.9 121.0 135.6 163.8 184.7 205.1 244.8 270.7

600 7.0 8.5 10.1 11.8 13.5 15.4 17.4 19.4 21.6 23.8 26.2 31.2 36.5 42.2 48.3 51.5 68.9 82.6 600 29.1 39.0 48.9 58.7 67.8 77.5 86.5 95.8 104.8 114.0 122.6 140.1 157.1 189.8 214.0 237.7 283.7 313.5

700 7.8 9.5 11.3 13.2 15.2 17.4 19.6 21.9 24.4 27.0 29.6 35.3 41.4 48.0 55.0 58.7 78.6 94.4 700 32.2 43.6 54.8 66.0 76.4 87.4 97.6 108.2 118.4 128.9 138.6 158.5 177.8 214.8 242.2 269.1 321.0 354.7

800 8.6 10.5 12.5 14.6 16.8 19.2 21.7 24.3 27.1 30.0 33.0 39.4 46.2 53.6 61.5 65.6 88.2 105.8 800 35.2 47.9 60.4 72.9 84.6 96.9 108.3 120.1 131.5 143.2 154.1 176.2 197.7 239.0 269.4 299.3 357.0 394.3

870 9.1 11.1 13.3 15.5 17.9 20.5 23.2 26.0 28.9 32.0 35.2 42.1 49.5 57.5 66.0 70.4 94.7 113.7 870 37.2 50.8 64.2 77.6 90.1 103.3 115.5 128.2 140.4 152.9 164.6 188.3 211.3 255.4 288.0 319.8 381.4 421.3

900 9.3 11.4 13.6 15.9 18.4 21.0 23.8 26.7 29.7 32.9 36.2 43.3 50.9 59.1 67.9 72.4 97.5 117.0 900 38.0 52.0 65.8 79.6 92.4 106.0 118.6 131.6 144.2 157.0 169.0 193.3 217.0 262.3 295.8 328.5 391.7 432.6

1000 10.0 12.3 14.6 17.2 19.9 22.7 25.7 28.9 32.2 35.7 39.3 47.1 55.4 64.4 74.1 79.1 106.7 128.0 1000 40.6 55.9 71.0 86.0 100.0 114.9 128.5 142.7 156.4 170.4 183.4 210.0 235.7 285.0 321.3 356.8 425.4 469.8

1160 11.1 13.6 16.3 19.1 22.1 25.4 28.8 32.3 36.1 40.0 44.2 53.0 62.5 72.7 83.7 89.5 121.0 145.2 1160 44.4 61.8 78.8 95.8 111.6 128.4 143.8 159.9 175.2 191.1 205.7 235.6 264.5 319.9 360.7 400.6 477.4 527.0

1200 11.4 13.9 16.6 19.6 22.7 26.0 29.5 33.2 37.0 41.1 45.3 54.4 64.2 74.8 86.1 92.0 124.6 149.5 1200 45.4 63.2 80.7 98.2 114.4 131.7 147.5 164.0 179.8 196.1 211.1 241.9 271.6 328.4 370.3 411.2 490.0 540.9

1400 12.6 15.4 18.5 21.8 25.3 29.1 33.0 37.2 41.6 46.2 51.1 61.4 72.6 84.7 97.7 104.5 141.9 170.3 1400 49.6 69.9 89.7 109.6 128.0 147.5 165.5 184.2 202.1 220.5 237.5 272.2 305.7 369.8 416.9 462.9 551.4 608.3

1450 12.9 15.8 19.0 22.4 26.0 29.8 33.9 38.2 42.7 47.5 52.5 63.1 74.7 87.2 100.6 107.6 146.2 175.4 1450 50.6 71.5 91.9 112.3 131.2 151.4 169.8 189.0 207.4 226.4 243.9 279.5 314.0 379.8 428.3 475.5 566.2 624.6

1600 13.7 16.8 20.3 23.9 27.8 32.0 36.4 41.1 46.0 51.2 56.6 68.2 80.8 94.4 109.0 116.6 158.8 190.6 1600 53.4 76.0 98.2 120.3 140.8 162.6 182.5 203.3 223.2 243.7 262.6 301.1 338.4 409.3 461.5 512.3 609.8 672.5

1750 14.5 17.8 21.5 25.4 29.6 34.1 38.8 43.8 49.1 54.7 60.6 73.1 86.7 101.4 117.2 125.5 171.2 205.4 1750 56.0 80.4 104.2 128.0 149.9 173.4 194.8 217.2 238.5 260.5 280.8 322.1 362.0 437.9 493.7 548.0 652.0 718.7

1800 14.7 18.2 21.9 25.9 30.2 34.8 39.6 44.7 50.2 55.9 61.9 74.7 88.6 103.7 119.9 128.4 175.3 210.3 1800 56.8 81.7 106.1 130.5 152.9 176.9 198.8 221.7 243.5 266.0 286.7 328.9 369.7 447.2 504.2 559.6 665.7 733.7

2000 15.7 19.4 23.4 27.8 32.4 37.4 42.7 48.3 54.2 60.4 66.9 81.0 96.2 112.8 130.5 139.9 191.4 229.7 2000 59.9 87.1 113.6 140.1 164.5 190.6 214.4 239.3 263.0 287.4 309.8 355.7 399.8 483.7 545.3 605.1 719.3 792.3

2400 17.4 21.7 26.3 31.2 36.6 42.3 48.4 54.9 61.8 69.0 76.6 93.0 110.9 130.2 151.1 162.1 222.8 267.3 2400 65.2 96.6 127.3 158.1 186.2 216.4 243.8 272.4 299.7 327.9 353.7 406.3 456.9 552.8 622.9 690.9 820.1 902.2

2800 19.0 23.7 28.8 34.4 40.4 46.9 53.8 61.1 68.9 77.1 85.8 104.4 124.8 146.9 170.8 183.4 253.1 303.7 2800 72.9 105.0 139.7 174.4 206.1 240.2 271.0 303.3 334.0 365.8 394.6 453.7 510.4 617.2 695.3 770.7 913.1 1003.1

3200 20.3 25.5 31.1 37.3 43.9 51.1 58.8 66.9 75.6 84.7 94.4 115.2 138.1 162.9 189.8 204.0 282.4 338.9 3200 80.8 112.3 150.9 189.4 224.5 262.4 296.4 332.2 366.2 401.3 433.1 498.2 560.6 677.7 763.0 845.1 999.1 1095.6

3600 21.5 27.1 33.2 39.9 47.2 55.0 63.4 72.4 81.9 92.0 102.6 125.6 150.9 178.4 208.2 223.9 311.0 373.2 3600 88.4 118.7 161.0 203.2 241.6 283.1 320.3 359.3 396.4 434.7 469.3 540.2 607.8 734.5 826.3 914.4 1078.4 1180.2

4000 22.6 28.6 35.1 42.4 50.2 58.7 67.8 77.5 87.9 98.9 110.5 135.6 163.2 193.3 225.9 243.2 338.9 406.7 4000 95.9 124.3 170.2 216.0 257.5 302.4 342.6 384.9 424.9 466.3 503.5 579.8 652.4 787.8 885.6 979.0 1151.3 1257.0

5000 24.7 31.6 39.2 47.7 56.9 66.9 77.7 89.2 101.6 114.7 128.7 158.9 192.2 228.7 268.3 289.3 406.0 487.2 5000 113.8 135.2 189.6 243.9 292.7 345.8 392.9 442.6 489.4 537.9 581.1 669.6 753.3 907.4 1017.3 1120.7 1306.3 1415.8

6000 26.2 33.8 42.4 52.0 62.5 73.9 86.3 99.6 113.8 129.0 145.1 180.2 219.1 261.7 308.1 332.7 469.8 563.8 6000 130.7 154.3 204.6 266.8 322.3 383.0 436.3 492.7 545.5 600.3 648.7 747.7 840.5 1008.6 1126.6 1235.3 1422.5 1526.3

7000 27.1 35.5 45.0 55.5 67.2 79.9 93.8 108.8 124.8 142.0 160.2 200.0 244.2 292.8 345.8 373.9 531.0 637.3 7000 147.0 173.3 216.0 285.5 347.2 414.7 473.7 536.1 594.2 654.6 707.3 815.0 915.0 1092.4 1214.1 1323.1 1499.2 1586.5

8000 27.6 36.6 46.9 58.4 71.1 85.2 100.4 117.0 134.7 153.8 174.1 218.4 267.8 322.2 381.6 413.2 590.0 708.0 8000 162.6 191.5 224.1 300.4 367.7 441.6 505.6 573.4 636.2 701.3 757.6 872.2 977.3 1159.1 1279.9 1383.5 1534.5 1593.4

10000 27.5 37.5 49.2 62.4 77.1 93.5 111.4 130.9 151.9 174.6 198.7 251.8 311.2 376.8 448.7 487.0 702.1 842.6 10000 192.2 225.7 259.3 320.5 397.5 482.4 554.7 631.3 701.2 773.7 834.6 957.4 1066.1 1240.3 1343.8 1418.4 1471.0 1431.9

12000 26.0 36.9 49.8 64.4 81.0 99.5 119.8 142.0 166.1 192.1 220.0 281.4 350.3 426.8 510.7 555.6 807.9 969.5 12000 219.7 257.3 294.6 331.6 413.4 507.3 585.4 668.1 742.3 818.9 880.9 1004.0 1106.6 1249.1 1312.0 1329.1 1209.3 1008.1

14000 23.5 35.1 48.9 64.9 83.1 103.5 126.1 150.9 177.9 207.1 238.4 307.8 385.9 472.8 568.5 619.7 908.3 1090.0 14000 245.5 286.4 326.7 366.1 416.7 517.2 598.6 684.8 760.0 837.2 896.5 1010.9 1096.9 1180.1 1175.5 1102.1

*Because the durability in terms of hours decreases in the marked range, this range should be avoided whenever possible. For other belt widths, values *Because the durability in terms of hours decreases in the marked range, this range should be avoided whenever possible. For other belt widths, values
above should be multiplied by the width correction coefficient shown in Table 28. above should be multiplied by the width correction coefficient shown in Table 28.

3531 3532
 [Technical Data] [Technical Data]
Selection of Timing Belts 11 -Transmission Capacity Table- Selection of Conveyor Timing Belts

Table52. Reference Transmission Capacity of EV5GT Ps -Belt Width 15mm- (W) QConveyer belts selection procedure [Step 4] Determine belt length (no. of teeth) and center distance.
No. of Teeth of Small Pulley 14 16 18 20 22 24 26 28 30 32 36 40 44 48 54 60 72 80
Diameter of the The following steps for selection is based on the case that sizes of head pulley and tail pulley are same. (1) Obtain approximate belt length from tentative center dimension (C') and approximate pulley diameter (Dp').
Lp’ = 2·C’ + π· Dp’
Rotary Speed of Pitch (Follow the steps 1 -3 even when sizes of head pulley and tail pulley are different) Lp' (mm) Approx. belt length
22.28 25.46 28.65 31.83 35.01 38.20 41.38 44.56 47.75 50.93 57.30 63.66 70.03 76.39 85.94 95.49 114.59 127.32
Small Pulley(rpm) Circle(mm) Use a head pulley as a driving pulley. C' (mm) Tentative center dimension
For belt installation and tension control, make the structure of the driven side to be adjustable of Dp' (mm) Approx. pully diameter
20 13 18 22 27 33 38 42 47 52 56 64 72 80 87 97 108 128 139 alignment and center distance with set screws.
40 24 33 41 50 61 70 79 88 96 104 120 136 150 163 183 203 240 263 *Head Pulley: The front of the pulley against traveling direction (2) Determine the number of teeth required from the approximate belt length (Lp') and pitch (P).
60 33 46 58 72 87 100 113 126 139 150 173 196 216 236 264 293 348 380 Tail Pulley: The rear end of the pulley against traveling direction Round down the obtained number of teeth (N) to the nearest whole number.
100 50 71 91 113 136 157 178 199 219 237 273 310 343 374 419 465 552 604 N= Lp’ /P N No. of belt teeth
[Step 1] Calculate effective tension (Te). p (mm) Pitch
200 85 125 163 205 248 287 326 365 403 438 506 575 636 695 780 867 1031 1129 *Check the minimum teeth of belt which is available.
300 115 173 228 289 350 407 464 520 574 625 723 823 912 996 1119 1244 1482 1623
e c tion Head pulley (Driving Pulley)
Dir (3) Obtain the proper belt length from the number of teeth (N) and pitch (P).
400 142 217 289 369 447 520 594 667 737 803 931 1060 1176 1285 1445 1607 1914 2096 eling
500 166 258 347 445 539 629 718 808 894 974 1131 1289 1430 1564 1759 1957 2333 2555 Trav Te= 9.8(μ·G+G·H/C)
Lp= P·N Lp (mm) Belt length
600 188 297 402 518 627 733 839 944 1046 1141 1325 1511 1678 1836 2065 2298 2740 3002
H (4) Determine proper center distance with the following formula:
700 208 333 454 589 712 834 956 1077 1193 1302 1514 1728 1919 2101 2364 2632 3139 3439 Te (N) Effective tension
800 227 368 505 657 795 933 1069 1206 1337 1460 1699 1940 2156 2360 2657 2958 3529 3866 G (Kg) Net weight of load placed on the belt surface C= P · (N−Dz)/2 C (mm) Center Distance
μ Friction coefficient of belt vs. table (Table 1) Dz No. of teeth of pulley
870 239 392 540 704 851 1000 1147 1294 1436 1569 1826 2086 2319 2539 2858 3183 3797 4161 H (mm) Lift
C [Step 5] Confirm the ajustment margin for the center distance is larger than figures in Table7-a and 7-b.
900 244 402 554 724 875 1028 1180 1332 1478 1615 1880 2148 2388 2615 2944 3279 3912 4286 Tail pulley C (mm) Tentative center dimension (conveyor length)
1000 260 434 602 789 954 1122 1289 1456 1616 1767 2058 2352 2616 2865 3227 3593 4288 4698
1160 284 483 675 890 1075 1268 1459 1649 1832 2004 2337 2672 2973 3257 3669 4087 4878 5343
Table 1. Typical Friction Coefficient of Belt versus Table
1200 289 495 693 915 1105 1304 1500 1696 1885 2062 2405 2751 3061 3353 3778 4209 5023 5502
Table Material Steel Stainless Aluminium UHMW Fluoropolymer
1400 315 551 780 1035 1251 1478 1704 1929 2145 2349 2742 3138 3493 3828 4314 4807 5736 6282
Friction coefficient: μ 0.65 0.68 0.42 0.31 0.21
1450 321 565 801 1065 1286 1521 1754 1986 2209 2419 2825 3233 3599 3945 4446 4954 5912 6474
1600 338 605 863 1152 1391 1647 1901 2155 2397 2627 3070 3516 3914 4291 4837 5390 6430 7040
[Step 2] Calculate design tension (Td). Center Distance
1750 354 643 923 1237 1494 1771 2046 2320 2583 2831 3311 3793 4224 4631 5221 5817 6939 7595
Inner Adjustment Allowance Outer Adjustment Allowance
Td=K·Te
1800 358 655 943 1264 1527 1811 2093 2374 2644 2899 3390 3884 4326 4743 5347 5958 7106 7777 Td (N) Design Tension
2000 376 703 1020 1374 1659 1971 2280 2589 2884 3164 3703 4244 4728 5185 5846 6513 7765 8494 K Overload Coefficient
2400 406 791 1165 1584 1911 2278 2641 3003 3349 3678 4309 4943 5509 6042 6812 7587 9034 9868 Te (N) Effective Tension
Table 7-a: Inner Adjustment Allowance (Attachment Allowance) Table 7-b: Outer Adjustment Allowance (Tension Allowance)
2800 440 872 1301 1783 2151 2571 2986 3400 3795 4171 4892 5615 6259 6865 7737 8613 10238 11165
Belt Type Inner Adjustment Allowance Distance between shafts (mm) Outer Adjustment Allowance
K=K1+K2+K3
3200 486 945 1429 1973 2380 2851 3318 3782 4225 4647 5455 6263 6982 7657 8625 9594 11379 12384 K1 Correction factors for daily operation hours
K2 Belt length correction coefficient L More than 10mm ~ 500 More than 5mm
3600 529 1011 1550 2155 2598 3120 3636 4150 4640 5107 5998 6888 7679 8419 9477 10531 12456 13522 K3 Belt speed correction coefficient H More than 15mm 501~1000 More than 10mm
4000 571 1072 1665 2330 2808 3379 3944 4505 5041 5550 6522 7492 8350 9151 10291 11423 13466 14575
S5M More than 10mm 1001~1500 More than 15mm
5000 667 1202 1925 2738 3296 3986 4667 5343 5985 6597 7758 8910 9920 10854 12167 13450 15686 16815 Table 2. K1 Correction Factors for Daily Operation Hours Unit: hour S8M More than 15mm 1501~2000 More than 20mm
6000 1305 2153 3108 3737 4539 5330 6112 6853 7559 8889 10199 11335 12372 13803 15172 17429 18431 ~5 5~8 8~12 12~16 16~24 T5 More than 5mm 2001~2500 More than 25mm
7000 1382 2352 3445 4136 5044 5936 6817 7648 8438 9915 11358 12590 13695 15183 16561 18641 19343 1.0 1.1 1.2 1.3 1.4 T10 More than 10mm 2501~ More than 1% of center distance
8000 2524 3749 4495 5501 6487 7459 8370 9235 10835 12383 13677 14812 16285 17586 19259
AT5 More than 10mm
9000 2671 4023 4815 5912 6984 8037 9018 9946 11645 13265 14586 15706 17086 18212 Table 3. K2 Belt Length Correction Factors Unit : mm AT10 More than 15mm
10000 4266 5096 6277 7426 8550 9591 10570 12339 13998 15303 16361 17560 ~1500 1501~3000 3001~4500 4501~
12000 4660 5541 6865 8141 9375 10498 11541 13356 14976 16113 16883 0.3 0.2 0.1 0.0 [Step 6] Install timing belt.
14000 4930 5825 7256 8617 9915 11067 12113 13831 15238
*Because the durability in terms of hours decreases in the marked range, this range should be avoided whenever possible. For other belt widths, values Table 4. K3 Belt Speed Correction Factors Unit : m/minute Install the belt with the installation tension in Table 8.
Axis weight at this time is twice the installation tension.
above should be multiplied by the width correction coefficient shown in Table 28. ~60 61~90 91~120
0.0 0.1 0.2
Table53. Reference Transmission Capacity of EV8YU Ps -Belt Width 20mm- (W) Fs= 2· Ti Fs (N) Shaft load
Ti (N) Fixing Tension (Table 8)
No. of Teeth of Small Pulley 20 22 24 26 28 30 32 34 36 38 40 44 48 54 60 64 72 80 [Step 3] Select belt type, belt width and pulley dimension.
Diameter of the
Pitch
Table 8. Installation Tension for Joint Belts Unit : N
Rotary Speed of 50.93 56.02 61.12 66.21 71.30 76.39 81.49 86.58 91.67 96.77 101.86 112.05 122.23 137.51 152.79 162.97 183.35 203.72 (1) Select from Table 5 a belt type and a width which have a greater allowable tension than the designed tension.
Small Pulley(rpm) Circle(mm) Belt width (mm)
Belt Type
Table 5. Allowable Tension of Joint Belts Unit : N 10 15 20 25 30 40 50
10 0.04 0.04 0.05 0.05 0.05 0.06 0.06 0.07 0.07 0.08 0.08 0.09 0.10 0.12 0.13 0.14 0.16 0.18
Belt width (mm) S5M 60 90 − 150 − − −
20 0.07 0.08 0.09 0.10 0.10 0.11 0.13 0.13 0.14 0.15 0.16 0.18 0.20 0.23 0.26 0.28 0.32 0.36
Belt Type S8M − 117 − 196 235 313 −
40 0.13 0.14 0.16 0.18 0.20 0.22 0.24 0.26 0.28 0.30 0.32 0.36 0.40 0.46 0.52 0.56 0.64 0.72 10 15 20 25 30 40 50 T5 29 43 58 72 − − −
60 0.18 0.21 0.23 0.26 0.29 0.32 0.35 0.38 0.41 0.44 0.48 0.54 0.60 0.69 0.78 0.84 0.96 1.08 S5M 120 180 − 300 − − − T10 − 90 120 150 180 240 300
100 0.28 0.33 0.37 0.42 0.47 0.52 0.57 0.62 0.67 0.72 0.78 0.88 0.99 1.14 1.30 1.40 1.60 1.80
S8M − 235 − 392 471 627 − AT5 37 55 − − − − −
200 0.52 0.60 0.69 0.79 0.89 0.99 1.10 1.20 1.29 1.39 1.52 1.73 1.96 2.27 2.58 2.79 3.19 3.60
T5 58 87 116 145 − − − AT10 117 156 195 − − − −
300 0.74 0.86 0.99 1.13 1.29 1.45 1.62 1.76 1.90 2.05 2.25 2.57 2.92 3.38 3.85 4.18 4.78 5.40
Unit : N
400 0.94 1.10 1.28 1.47 1.67 1.89 2.12 2.30 2.50 2.70 2.97 3.40 3.86 4.48 5.12 5.56 6.37 7.20 T10 − 180 240 300 360 481 601 Belt Nominal Width
500 1.13 1.34 1.56 1.80 2.05 2.32 2.61 2.84 3.08 3.33 3.68 4.23 4.81 5.59 6.38 6.94 7.95 8.99 AT5 74 110 − − − − − Belt Type
050 075 100 150 200
600 1.32 1.57 1.83 2.12 2.42 2.75 3.10 3.38 3.67 3.97 4.38 5.04 5.75 6.68 7.64 8.31 9.53 10.78 AT10 − 234 312 391 − − − L 46 69 92 138 −
700 1.50 1.79 2.10 2.43 2.79 3.17 3.58 3.90 4.24 4.59 5.08 5.86 6.68 7.77 8.89 9.68 11.10 12.57 Unit : N H − 81 108 162 216
800 1.68 2.00 2.36 2.74 3.15 3.59 4.05 4.43 4.81 5.22 5.78 6.66 7.61 8.86 10.14 11.04 12.67 14.34
Belt Nominal Width
870 1.80 2.15 2.54 2.95 3.40 3.87 4.38 4.79 5.21 5.65 6.26 7.23 8.26 9.62 11.01 11.99 13.76 15.58 Belt Type
900 1.85 2.21 2.61 3.04 3.50 4.00 4.52 4.94 5.38 5.83 6.47 7.47 8.54 9.95 11.39 12.40 14.23 16.11
050 075 100 150 200
1000 2.02 2.42 2.86 3.34 3.85 4.40 4.99 5.46 5.94 6.45 7.15 8.27 9.46 11.03 12.63 13.75 15.78 17.88 L 92 138 184 276 −
1160 2.28 2.74 3.26 3.81 4.41 5.05 5.73 6.27 6.83 7.42 8.24 9.54 10.92 12.75 14.60 15.91 18.26 20.68 H − 163 216 324 432
1200 2.34 2.82 3.35 3.92 4.54 5.20 5.91 6.47 7.06 7.66 8.51 9.86 11.29 13.17 15.09 16.45 18.87 21.37
1400 2.65 3.21 3.83 4.50 5.22 5.99 6.82 7.48 8.16 8.86 9.86 11.43 13.11 15.30 17.54 19.11 21.93 24.83 (2) Select a pulley with a larger number of teeth than the minimum allowable number in Table 6 for both of driving and driven pulley.
1450 2.73 3.31 3.94 4.64 5.39 6.19 7.05 7.72 8.43 9.16 10.20 11.82 13.56 15.83 18.15 19.78 22.69 25.68
1600 2.95 3.59 4.29 5.06 5.88 6.77 7.72 8.47 9.24 10.05 11.20 12.99 14.91 17.41 19.96 21.75 24.95 28.23
Table 6. Number of Minimum Allowable Number of Teeth for Pulleys
1750 3.17 3.87 4.63 5.47 6.37 7.34 8.39 9.20 10.05 10.93 12.19 14.15 16.25 18.98 21.75 23.71 27.18 30.75
Belt Type L H S5M S8M T5 T10 AT5 AT10
1800 3.24 3.96 4.75 5.61 6.53 7.53 8.61 9.44 10.31 11.22 12.52 14.54 16.69 19.50 22.35 24.36 27.93 31.58
Pitch (mm) 9.525 12.7 5 8 5 10 5 10
2000 3.52 4.32 5.19 6.14 7.17 8.29 9.48 10.41 11.37 12.38 13.82 16.06 18.46 21.56 24.71 26.94 30.85 34.86
Min. No. of Pully Teeth 14 14 14 24 12 14 20 14
2400 4.06 5.01 6.05 7.19 8.43 9.76 11.20 12.30 13.45 14.65 16.39 19.07 21.93 25.61 29.34 31.97 36.55 41.21
Pully Diameter (mm) 42.45 56.60 22.28 61.12 19.10 44.56 31.83 44.56
2800 4.57 5.66 6.88 8.20 9.64 11.20 12.87 14.15 15.48 16.87 18.90 22.00 25.31 29.55 33.82 36.82 41.99 47.22
3200 5.05 6.29 7.67 9.18 10.82 12.59 14.50 15.95 17.46 19.03 21.35 24.86 28.60 33.35 38.12 41.46 47.14 52.83 Reference: Table on Open-end belts Allowable Tension Unit : N Unit : N
3600 5.50 6.89 8.43 10.12 11.96 13.95 16.08 17.69 19.38 21.12 23.72 27.62 31.78 37.01 42.22 45.86 51.95 57.98
Belt width (mm) Belt Nominal Width (mm)
4000 5.94 7.47 9.17 11.03 13.06 15.26 17.62 19.39 21.23 23.15 26.02 30.30 34.84 40.50 46.10 50.00 56.39 Belt Type Material Belt Type Material
6 10 15 20 25 30 40 50 025 037 050 075 100 150 200
5000 6.91 8.79 10.87 13.16 15.65 18.34 21.24 23.37 25.59 27.88 31.39 36.50 41.90 48.40 54.68
S3M Polyurethane 127 − − − − − − − Rubber − 45 70
6000 7.75 9.94 12.38 15.05 17.97 21.12 24.52 26.95 29.47 32.08 36.16 41.92 47.96 54.90 XL − − − −
Rubber 310 490 − Polyurethane 66 102 142
7000 8.44 10.92 13.68 16.70 20.00 23.57 27.39 30.06 32.82 35.65 40.22 46.41 52.84 S5M − − − − −
Polyurethane 215 323 539 Rubber 95 165 −
8000 8.99 11.72 14.76 18.09 21.72 25.63 29.82 32.65 35.55 38.52 43.45 L − − − −
Rubber − 950 − − Polyurethane 259 387 519
*Because the durability in terms of hours decreases in the marked range, this range should be avoided whenever possible. For other belt widths, values S8M − − − −
Polyurethane 647 1176 1412 1882 Rubber − 600 − −
above should be multiplied by the width correction coefficient shown in Table 28. H − − −
T5 Polyurethane − 112 166 225 284 − − − Polyurethane 397 529 799 1093
T10 Polyurethane − − 299 397 529 627 862 1064
AT5 Polyurethane − 147 221 − − − − −
AT10 Polyurethane − − 469 625 781 − − −
EWhen using belts for other purpose than conveyance (e.g. transmission), for polyurethane belt S3M; design with 1/2 of the allowable tension in the table; for XL, L, H, S5M, S8M, T5 and T10, design with
approx. 2/3 of the allowable tension in the table.
3533 3534