Structural Design Calculations For Ahu Support
Structural Design Calculations For Ahu Support
Structural Design Calculations For Ahu Support
STRUCTURAL DESIGN CALCULATIONS FOR AHU
SUPPORT
Contents
Conclusion ……………………………………………………….. 4
Input drawings & Loads
Plan of AHU
Load Calculation :
Empty condition
Operating condition
1
= 3.98 kN
Load per running meter = 3.98/(.5x4.20)
= 1.89 kN/m
Staad Model
Empty & ,Operating loading condition
2
Deflected shape of beam
Utilization ratio
3
CONCLUSION:
1. The Structural Members are designed by use of STAAD Pro software and the member is
within the Utilization Ratio (i.e., < 1) hence ok.
2. The Deflection of bending member is also limited to the allowable values L/360.
SUPPORT REACTION:
The Following are the maximum reactions occurring at the support, which shall be used for
design of base plates, anchor bolts and local checking of supporting members.
The reactions are unfactored and shall factored while designing.
4
Staad Input & Output
_ PAGE NO. 1
_
****************************************************
* *
* STAAD.Pro CONNECT Edition *
* Version 22.00.00.15 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= OCT 9, 2020 *
* Time= 8: 2:53 *
* *
* Licensed to: only @ ::LAVTeam:: (R) *
****************************************************
_
1. STAAD SPACE
INPUT FILE: D:\Projects\Rajkumar\AHU Support design\2.Design\SB support\SB-
Support.STD
2. START JOB INFORMATION
3. ENGINEER DATE 06-04-2020
4. JOB REV 1
5. JOB PART PIPE SUPPORT-PS-2
6. ENGINEER NAME SPK
7. END JOB INFORMATION
8. INPUT WIDTH 79
9. UNIT METER KN
10. JOINT COORDINATES
11. 1 0 0.0999999 0; 2 0 -1.2 0; 5 1.4 -1.2 0; 10 1.4 0.0999999 0
12. MEMBER INCIDENCES
13. 1 1 2; 2 10 5; 3 2 5
14.
***************************************************************************
***
15. DEFINE MATERIAL START
16. ISOTROPIC STEEL
17. E 1.99947E+08
18. POISSON 0.3
19. DENSITY 78.5
20. ALPHA 6.5E-06
21. DAMP 0.02
22. END DEFINE MATERIAL
5
23.
***************************************************************************
***
24. MEMBER PROPERTY BRITISH
25. 1 TO 3 TABLE ST CH100X50X10
26.
***************************************************************************
***
27. CONSTANTS
28. MATERIAL STEEL ALL
29.
***************************************************************************
***
30. SUPPORTS
31. 1 10 FIXED
32. ***************************\\DEAD
LOAD\\\************************************
33.
***************************************************************************
***
34. LOAD 1 LOADTYPE DEAD TITLE LOAD CASE 1 DL
35.
***************************************************************************
***
36. ***SELF WEIGHT OF MEMBERS
37. SELFWEIGHT Y -1.1
38. MEMBER LOAD
_ STAAD SPACE -- PAGE NO. 2
PROBLEM STATISTICS
-----------------------------------
6
SOLVER USED IS THE OUT-OF-CORE BASIC SOLVER
_
_ STAAD SPACE -- PAGE NO. 3
X = 0.700000007E+00
Y = -0.112598147E+01
Z = 0.000000000E+00
_TOTAL APPLIED LOAD 1_
7
RX= 0.00000E+00 0
RY= 0.00000E+00 0
RZ= -1.47180E-04 2
X = 0.700000007E+00
Y = -0.119999999E+01
Z = 0.000000000E+00
_ STAAD SPACE -- PAGE NO. 4
8
48.
***************************************************************************
****
49. *************//DESIGN
PARAMETERS///********************************************
50. PARAMETER 1
51. CODE BS5950
52. PY 250000 ALL
53. RATIO 1 ALL
54. MAIN 1 ALL
55. DFF 360 ALL
56. TRACK 0 ALL
57. TRACK 4 ALL
58. CHECK CODE ALL
_STEEL DESIGN _
59. FINISH
9
*********** END OF THE STAAD.Pro RUN ***********
************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://www.bentley.com/en/support/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) 1997-2017 Bentley Systems, Inc. *
* http://www.bentley.com *
************************************************************
10