7.

Level 2 Repair

7-1. Components on the Rear Case

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

7-2. Pre-requisite

Tweezers / Disass'y Stick / Screw Driver Anti-static Gloves

Anti-static Mat Hot Plate

A OCTA Disassembly Holder OCTA Disassembly Upper

Ethyl Alcohol Cotton Swab

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

7-3. Parts which must be changed after repair

BOM Description & part code Image Remarks

A/S Back glass Outside Tape

[GH81-14574A]

Replace for
Back Glass repair
A/S Back glass Inner Tape Top
[GH81-14575A]

A/S Back glass Inner Tape

BTM
[GH81-14648A]

A/S Finger Print Tape Replace Back Glass or

[GH02-14440A] Finger print repair

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

7-4. Disassembly

1 1) Put the device in the chamber as following 2 Unscrew 15 Point and disassemble SIM Tray
below heating condition. from device.
- SOC 68%↓: 70℃/10~20min
- SOC 68%↑: 60℃/10~20min
※ Please confirm the heating condition released
lastly, and follow it.
2) Detach the Back Glass.

※ Caution ※ Caution
1) Be care of scratch. 1) Be care of scratch.

3 Disassemble Upper Rear. Finally Disassemble Rear of bottom side.

4
(Use disassemble hole left side of Rear to detach it) (Use disassemble hole left side of Rear to detach it)

※ Caution ※ Caution
1) Be care of Rear damage 1) Be care of Rear and connector damage

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

5 Detach 2 3D PCB Receptacle cables, 6 Detach Iris CAM and Front CAM.
Battery connect and the other connectors.
(8 Point connector)

※ Caution ※ Caution
1) Be care of connector/cable damage. 1) Be care of connector/cable damage.

7 Detach main PBA from Front. 8 Detach other components.

※ Caution
※ Caution
1) Be care of FPCB damage.
1) Be care of several kinds of damage.
2) Be care of SUB PBA connector.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

7-5. Aassembly

1 Attach SUB PBA and Ear jack on Front. 2 Screw 5 point in SUB PBA.
※ Torque 1.3Kgf·cm

※ Caution ※ Caution
1) Be care of coaxial cable damage. 1) Be care of chip damage nearby screw point.

3 Attach components on Front. 4 Attach PBA assy In Front Assy.

(Sensor FPCB, Motor) (PBA+ Front)

※ Caution
※ Caution
1) Be care of FPCB damage and tilt.
1) Be care of Push SUB PBA connector.
2) Be care of press power/time.
2) Be care of components FPCB..
3) Do not reuse battery.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

5 Attach IRIS/SUB CAM on PBA. 6 Attach 2 3D PCB Receptacle cables, Battery

connect and the other connectors. (8 Point)

※ Caution
※ Caution
1) Be care of connector damage.
1) Be care of CAM Lens from finger print. 2) The Battery connector is the last attach.

7 Assemble the REAR in sequence. 8 Screw 15 Point and then insert SIM Tray on
Lower → Upper Rear. device. ※ Torque :1.3 Kgf·cm

※ Caution ※ Caution
1) Be care of scratch and REAR damage. 1) Be care of scratch and REAR damage.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

9 Attach Finger print sensor on PBA. 10 Attach finger print sensor tape on the back.
Attach inner and outside tape on the rear case.
And assemble the back glass

※ Caution ※ Caution
1) Be care of scratch and REAR damage. 1) Be care of scratch and tilt.

11 Press Back Glass.

Pressing force: 1N / Pressing time: 1m

※ Caution
1) Be care of scratch.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.