7.

Level 2 Repair

7-1. Components on the Rear Case

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

7-2. Pre-requisite

Tweezers / Disass'y Stick / Screw Driver Anti-static Gloves

Anti-static Mat Hot Plate

A OCTA Disassembly Holder OCTA Disassembly Upper

Ethyl Alcohol Cotton Swab

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

7-3. Parts which must be changed after repair

BOM description & part

KIT CODE Image Remarks
code

A/S-SVC TAPE BG WP
OUTER
(Common)

[GH81-15404A]

Replace for

Back Glass repair

A/S REWORK KIT-
A/S-SVC TAPE BG INNER SM-G9600/G9608
NA (CHN/LA) (CHN/LA)

[GH81-15406A] [GH82-15974A]

A/S-SVC TAPE BG INNER

BTM NA (USA,CHN)

[GH81-15415A]

Replace for Back

TAPE FINGER SENSOR Glass
WP
Or Finger print
[GH02-15815A]
sensor repair

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

7-4. Disassembly

1 Put the device in the chamber as following 2 Detach the Back Glass. And Finger sensor
below heating condition 1) Detach the left side of Back glass
- SOC 68%↓: 70℃/10~20 minute 2) Detach the Finger sensor connector
- SOC 68%↑: 70℃/10~20 minute
※ Please confirm the heating condition
released lastly, and follow it.

※ Caution ※ Caution
Be care of scratch Be care of scratch

3 Unscrew 15 Point and disassemble SIM Tray 4 Disassemble Upper Rear.

from device (Use disassemble hole left/right side of Rear to
detach it)

Rear Top disassemble hole.

※ Caution
※ Caution
1) Be care of scratch
Be care of Rear damage
2) Be care of Rear and connector damage

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

Finally Disassemble Rear of bottom side.

5 (Use disassemble hole right side of Rear to 6 Unscrew PBA 1points.
detach it)

※ Caution
1) Be care of scratch ※ Caution
2) Be care of Rear and connector damage Be careful not to damage the PBA
3) Be careful not to damage the PBA

7 2 coaxial cable, Battery connect and the other 8 Detach SUB PBA connector
connectors. (7 Point)

※ Caution ※ Caution
1) Be care of scratch 1) Be care of FPCB damage
2) Be care of connector/cable damage 2) Be care of SUB PBA connector

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

9 Detach other components. 10 Unscrew SUB PBA 5points

※ Caution ※ Caution
Be care of several kinds of damage Be careful not to damage the SUB PBA

11 Detach Ear Jack 12 Detach SUB PBA (1/4)

※ Caution
※ Caution
1) Be care of SUB PBA damage
2) Be care of Ear jack connector Be care of SUB PBA damage

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

13 Detach SUB PBA (2/4) 14 Detach SUB PBA (3/4)

※ Caution ※ Caution
Be care of SUB PBA damage Be care of SUB PBA damage

15 Detach SUB PBA (2/4)

※ Caution
Be care of SUB PBA damage

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

7-5. Assembly

1 Attach SUB PBA and Ear jack on Front. 2 Screw 5point in SUB PBA.

※ Caution ※ Caution
Be care of coaxial cable damage Be care of chip damage nearby screw point.

Attach components on Front. Attach PBA assy In Front Assy.

3 4
(TOP SPK, Sensor FPCB, Motor) (PBA+ Front)

※ Caution ※ Caution
1) Be care of FPCB damage and tilt 1) Be care of Push SUB PBA connector.
2) Be care of press power/time 2) Be care of components FPCB.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

5 Attach Front CAM and Iris CAM on PBA. 6 Attach 2 coaxial cable, Battery connect and
the other connectors. (8 Point)

※ Caution ※ Caution
Be care of press power/time Be care of FPCB and Y-OCTA damage

7 Assemble the Bottom REAR in sequence. 8 Assemble the TOP+MID REAR Assy in
sequence.

※ Caution ※ Caution
Be care of scratch and REAR damage Be care of scratch and REAR damage

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

9 Unscrew 15 Point and disassemble SIM Tray 10 Attach the finger sensor on the REAR and
from device Assemble the finger sensor on the PBA
* Screw Torque : 1.3kgf

※ Caution ※ Caution
Be care of scratch and REAR damage Be care of scratch and tilt.

11 Attach the back glass inner tape on the 12

backglass Attach the finger tape on the back glass.

※ Caution ※ Caution
Be care of scratch and tilt. Be care of scratch and tilt.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

13 Attach the back glass outside tape on the rear

14
case Attach the back glass on the REAR side.

※ Caution ※ Caution
Be care of scratch and tilt. Be care of scratch and tilt.

15 Press Back Glass.

Pressing force : 1 N
Pressing time : 1 minute

※ Caution
Be care of scratch.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.