C5OL

Huck-Engineered Lockbolts
for the Most Challenging
Applications
2 Huck® | C5OL®

Huck C50L ® ®

The Fastener That Has Defined HuckBolts

for More Than 50 years

The C50L® offers superior vibration resistance and

overall durability for heavy-duty fastening jobs, and
is ideal for use within applications where consistent,
uniform high clamp force is required. Testing has
proven that C50L fasteners meet, or exceed the
performance of torqued bolts in both shear and
tensile strength, as well as fatigue life. For heavy-duty
applications ranging from railcar to mining equipment
manufacturing, the C50L delivers superior vibration
resistance and overall durability.

Available Sizes 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 1-3/8”

Materials Steel, Aluminum

Headstyles Round, Truss, Large Truss, 90° Flush, Thread Head

✓ Superior vibration resistance ✓ High fatigue life

✓ Overall durability for heavy- ✓ Consistent, uniform clamp force
duty applications

✓ High shear and tensile strength

 Howmet Fastening Systems 3

Unlike threaded fasteners, the C50L HuckBolt delivers consistent

installation results. High costs of calibrating, maintaining, and
replacing tools are eliminated. Also, installation does not require

1
Insert pin into the prepared
expensive, highly experienced workers. hole and the smooth bore
collar is placed on the pin.

Secure, Fast Installation

2
The installation tool is applied
to the pintail. When the tool is
activated, the jaws in the nose
assembly pull on the pintail
and the nose anvil pushes on
the collar to remove any gap.

3
The nose anvil starts to swage
the collar into the lockgrooves
on the pin. Continued swaging
causes the collar to lengthen
and develop clamp.

1 Swaged-on collar forms a permanent, vibration-proof connection.

2 Initial long length of fastener enables pull-out of large gaps.

3 C
 onsistent, repeatable pre-load.

4
When swaging of the collar into
the lockgrooves is complete,
the tool ejects the fastener and
releases the puller to complete
the sequence.
4 Huck® | C5OL®

Data and Dimensions

C C
C A ROUND C50LR A
TRUSS C50LT A
LARGE TRUSS C50L30
B B B

min. min.
grip grip min.
D D grip
E D
E E

C
C
A STAINLESS CAP C30C A 90° FLUSH C50L90 C A 60° FLUSH C50L60

B 90 B 60 B
ref ref

min. min. min.grip

grip grip D
D D
E E E

Fastener Dimensions
STAINLESS
ROUND TRUSS HEAD 90°
C50L30 STEEL C50L60
DIA. CODE A HEAD C50LT FLUSH HEAD
CAPPED HEAD
B C B C B C B C B C B C
.493 - .870- .310- .875- .215- 1.027- .251- .870- .225-
1/2" 16 — v — —
.515 940 .320 .938 .260 1.09 .281 .940 .239
.617 - 1.086- .367- 1.086- .267- 1.288- .298- 1.093- .284-. 1.33- .33-
5/8" 20 — —
.642 1.196 .432 1.196 .432 1.375 .328 1.183 300 1.44 .39
.740- 1.328- .455- 1.328- .323- 1.312- .350- 1.101- .337-
3/4" 24 — — — c
.770 1.438 .530 1.438 .398 1.417 .380 1.125 .357
.865- 1.540- .530- 1.540- .395- 1.531- .396- 1.298- .393-
7/8" 28 — — — —
.900 1.660 .580 1.660 .445 1.655 .430 1.338 .413
1.025 - 1.750- .590- 1.750- .473- 1.478- .454-
1" 32 — — — — — —
.990 2.000 .650 1.895 .501 1.522 .474
1.095 - 2.000- .656- 1.661- .506-.
1-1/8" 36 — — — — — — — —
1.125 2.125 .720 1.715 526
1.400 - 2.470- .815- 2.448- .648-
1-3/8" 44 — — — — — — — —
1.350 2.590 .880 2.572 .703

Grip Tables*
1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-3/8"
GRIP (16) (20) (24) (28) (32) (36) (44)
GRIP
RANGE GRIP
D E D E D E D E D E D E
RANGE
4 .250 - .500 1.213 3.172 1.433 3.656 1.518 4.156 — — — — — —
8 .500 - .750 1.463 3.422 1.683 3.906 1.768 4.406 1.921 4.688 2.073 5.375 — —
12 .750 - 1.000 1.713 3.672 1.933 4.156 2.018 4.656 2.171 4.938 2.323 5.625 — —
16 1.000 - 1.250 1.963 3.922 2.183 4.406 2.268 4.906 2.421 5.188 2.573 5.875 — —
20 1.250 - 1.500 2.213 4.172 2.433 4.656 2.518 5.156 2.671 5.438 2.823 6.125 — —
24 1.500 - 1.750 2.463 4.422 2.683 4.906 2.768 5.406 2.921 5.688 3.073 6.375 — —
28 1.750 - 2.000 2.713 4.672 2.933 5.156 3.018 5.656 3.171 5.938 3.323 6.625 — —
32 2.000 - 2.250 2.963 4.922 3.183 5.406 3.268 5.906 3.421 6.188 3.573 6.875 — —
36 2.250 - 2.500 3.213 5.172 3.433 5.656 3.518 6.156 3.671 6.438 3.823 7.125 — —
40 2.500 - 2.750 3.463 5.422 3.683 5.906 3.768 6.406 3.921 6.688 4.073 7.375 — — Up to
44 2.750 - 3.000 3.713 5.672 3.933 6.156 4.018 6.656 4.171 6.938 4.323 7.625 — — 34.25"
48 3.000 - 3.250 3.963 5.922 4.183 6.406 4.268 6.906 4.421 7.188 4.573 7.875 — —
52 3.250 - 3.500 4.213 6.172 4.433 6.656 4.518 7.156 4.671 7.438 4.823 8.125 — — Call for
56 3.500 - 3.750 4.463 6.422 4.683 6.906 4.768 7.406 4.921 7.688 5.073 8.375 5.250 8.563 Data
60 3.750 - 4.000 4.713 6.672 4.933 7.156 5.018 7.656 5.171 7.938 5.323 8.625 5.500 8.813
64 4.000 - 4.250 4.963 6.922 5.183 7.406 5.268 7.906 5.421 8.188 5.573 8.875 5.750 9.063
68 4.250 - 4.500 5.213 7.172 5.433 7.656 5.518 8.156 5.671 8.438 5.823 9.125 6.000 9.313
72 4.500 - 4.750 5.463 7.422 5.683 7.906 5.768 8.406 5.921 8.688 6.073 9.375 6.250 9.563
76 4.750 - 5.000 5.713 7.672 5.933 8.156 6.018 8.656 — — 6.323 9.625 6.500 9.813
80 5.000 - 5.250 5.963 7.922 — — — — — — 6.573 9.875 6.750 1.063
84 5.250 - 5.500 — — — — — — — — 6.823 1.125 7.000 1.313
88 5.500 - 5.750 — — — — — — — — 7.073 1.375 7.250 1.563
92 5.750 - 6.000 — — — — — — — — 7.323 1.625 7.500 1.813

*All grips are calculated using a LC collar

 Howmet Fastening Systems 5

Standard-LC Flanged-3LC1 Low Profile-8LC2 AC-R44 1

When using a 3LC collar the minimum grip is equal to the
LC-2R Min grip using a LC collar - "nominal J", Maximum grip is equal
H to the Max grip using the LC collar - "nominal J" ("J" represents
the flange thickness of the 3LC)

G F 2
When using an 8LC collar - Min grip is equal to LC Min Grip
(See Table), Max Grip is equal to Min grip + grip range + "L" ("L"
is the difference in height between the 8LC and LC collars.)

Collar Dimensions
STYLE DIA. F G H J K L
1/2" .515 - .540 .765 -.800 .610 - .645 — — —
5/8" .650 - .665 .970 -.985 .845 - .875 — — —
3/4" .776- .790 1.165 -1.180 .930 - .960 — — —
LC
7/8" .896 - .920 1.355 - 1.375 1.083 - 1.120 — — —
1" 1.030 - 1.050 1.550 -1.575 1.235 -1.280 — — —
1-1/8" 1.150- 1.180 1.740 -1.770 1.390 -1.440 — — —
1/2" .510 - .535 .793 - .807 .726 - .756 .094-.156 .969 -1.031 —
5/8" .650 - .665 .980-.996 .929 - .959 .125-.187 1218 -1.281 —
3/4" .776 - .790 1.170-1.195 1.109 - 1.155 .156- .218 1.480 - 1.525 —
3LC
7/8" .896 - .920 1.360 - 1.370 1.293-1.339 .187- .250 1.570 - 1.615 —
1" 1.030 - 1.050 1.550 - 1.565 1.485- 1.515 .218- .281 1.843 - 1.906 —
1-1/8" 1.160 - 1.175 1.750 - 1.760 1.675- 1.715 .273 - .289 2.105 - 2.145 —
1/2" .515-.535 .780 - .800 .470 - .500 — — .140 -.145
5/8" .640 - .665 .972 - .982 .670 - .700 — — .175
8LC 3/4" .775 - .790 1.165 - 1.180 .715 - .745 — — .215
7/8" .910 - .930 1.360 - 1.375 .833 - .863 — — .250 - .257
1" 1.030 - 1.050 1.552 - 1.568 .950 - .980 — — .285 - .300
AC-R44 1-3/8" 1.409-1.419 2.147-2.157 1.738 -1.762 — — —

Installed Fastener Values

HOLE CARBON STEEL PINS 2024C ALUMINUM PINS 6061F ALUMINUM PINS CARBON STEEL PINS
DATA LC-2R OR 3LC-2R COLLARS LC-F OR 3LC-F COLLARS LC-I OR 3LC-I COLLARS 8LC-2R COLLARS
DIA. (MIN LBF) (MIN LBF) (MIN LBF) (MIN LBF)
(MAX
HOLE)
SHEAR CLAMP TENSILE SHEAR CLAMP TENSILE SHEAR CLAMP TENSILE SHEAR CLAMP TENSILE
1/2" .563 14400 12050 17050 7300 5900 7850 5300 4400 4900 14400 9650 13650
5/8" .688 22500 19200 27100 11400 9200 12300 8300 6900 7670 22500 15360 21700
3/4" .813 32400 28400 40100 16400 13300 17700 11900 9950 11040 32400 22720 32100
7/8" .938 43400 39250 55450 43400 31400 44350
s p e c i a l o r d e r o n l y
1" 1.063 56500 51500 72700 56500 41200 58150
1-1/8" 1.188 69500 58450 82950 — — — — — — 69500 46760 66360
1-3/8" 1.500 100000 85000 129500 — — — — — — — — —

Inspection Data
D
PIN PART LC 3LC 8LC A B C D
DIA.
NO. COLLAR COLLAR COLLAR MAX MAX MIN MAX B A
1/2" C50L( )-( )16 LC-2R16G 3LC-2R16G 8LC-2R16G .063 .375 .406 .733
C
5/8" C50L( )-( )20 LC-2R20G 3LC-2R20G 8LC-2R20G .063 .375 .625 .916

3/4" C50L( )-( )24 LC-2R24G 3LC-2R24G 8LC-2R24G .063 .375 .656 1.110 LC Collar

7/8" C50L( )-( )28 LC-2R28G 3LC-2R28G 8LC-2R28G .063 .375 .750 1.282 3LC Flanged A
Collars
1" C50L( )-( )32 LC-2R32G 3LC-2R32G 8LC-2R32G .063 .375 .875 1.465

1-1/8" C50LR-BR36 LC-2R36G — 8LC-2R36G .063 .625 .906 1.646

1-3/8" C50LR-BR44 AC-R44U — — .188 .688 1.250 2.020

8LC Collar

3LC Flanged
Collars
6 Huck® | C5OL®

Ordering Information
Follow the form below to construct a part number for ordering C50L pins and their respective collars.
Refer to the Grip Tables (page 4) for grip numbers.

Pins C50L (HEAD STYLE) - (MATERIAL) (DIAMETER) - (GRIP NUMBER) - (COATING)

Example: C50LR-BR16-4 is a C50L HUCKBOLT fastener, Round Head, Carbon Steel, 1/2" Diameter, Grip 4

BOLT HEAD BOLT FINISH SUFFIX

PREFIX CODE DIA. CODE GRIP
STYLE MATERIAL
1/2" 16 Zinc Plate, Clear Chro-
Round R G
Carbon Steel BR mate .0003"
Truss T 5/8" 20
Zinc Plate, Clear Chro-
Aluminum 2024 3/4" 24 GA
Stainless Cap C mate .0004"
and 6061 special Refer to
7/8" 28 Grip Tables Geomet - 1 Coat NP
Large Truss 30 order only
1" 32 on page 4
Geomet - 2 Coat D1
90° Flush 90 Stainless Steel 1-1/8" 36
Geomet - 3 Coat DL
60° Flush 60 available on request 1-3/8" 44
Oil Finish no suffix

Collars (COLLAR STYLE) - (MATERIAL) (DIAMETER) (COATING) (OPTIONS)

Example: LC-2R16G is a Standard Collar, Low Carbon Steel, 1/2" Diameter, Zinc Finish

COLLAR STYLE PREFIX MATERIAL CODE DIAMETER CODE COATING CODE OPTIONS SUFFIX
Standard LC- Low Carbon 1/2" 16 Zinc G Tab-Lok L
2R
Flanged 3LC- Steel 5/8" 20 Additional coating
Low Profile 8LC- Aluminum 3/4" 24 options available
Low Profile (44) AC-R44 special order only 7/8" 28
1" 32
1-1/8" 36
1-3/8" 44

Tab-Lok™

The optional Tab-Lok feature

makes sure the collar stays on
the pin, before installation, in
overhead and down slanted
pin placements.
 Howmet Fastening Systems 7

Installation Tooling
Hydraulic Tools & Nose Assemblies
TOOL MODEL
SIZE
2620 2620PT 2624 3585 2630 507 12142
1/2" 99-5000 99-5002 99-5021 99-5021 - - -
5/8" - - 99-5008 99-5008 - - -
NOSE
ASSEMBLY 3/4" - - - 99-5010 - - -
7/8" - - - - 99-5014 - -
1" - - - - - 99-5016 -
1-1/8" - - - - - 99-5019 -
1-3/8" - - - - - - Integral

2620/2620-PT* 2624 3585 2630 507 12142

Tooling Weight and Dimensions

MODEL WEIGHT LENGTH HEIGHT WIDTH
2620/2620-PT *
1.4/11.0 lbs. 6.60"/1.10" 7.0" 2.82"
2624 13.9 lbs. 7.37" 7.73" 3.48"
3585 18.5 lbs. 7.84" 1.36" 4.02"
2630 22.3 lbs. 7.90" 8.65" 4.44"
507 43.4 lbs. 15.50" 6.00" 5.40"
12142 6.0 lbs. 11.76" 6.56" 6.56"
For limited clearance installation tools contact manufacturer.
* Pass through

Huck Powerig® Hydraulic Units

MODEL 913H MODEL 968
MODEL 918/918-5 MODEL 940
(NOT SHOWN) (NOT SHOWN)

High-production Portable; production Portable; production Portable; production Powerig Model

applications and repair and repair and repair 918/918-5
918 powers 2 tools
(2 gpm/tool) 70 in.3/min. flow rate 139 in.3/min. flow rate 70 in.3/min. flow rate
918-5 powers 3 tools (.3 gpm) (.6 gpm) (.3 gpm)
(1.3 gpm/tool)

Electrically powered; Electrically powered; Gasoline Air powered; 50 cfm

220, 440, or 550 volts, 115 or 220 volts, powered (.024 m3/s)
3 phase single phase

Weighs 585/601 lbs. Weighs 66 lbs. Weighs 122 lbs. Weighs 75 lbs.
without without without without
hydraulic fluid hydraulic fluid hydraulic fluid hydraulic fluid Powerig
Model 940
44"l x 25"w x 13.9"l x 16.1"w x 24"l x 21"w x 1.45"l x 16.33"w x
30"h 18.5"h 27"h 15.68"h
Howmet Fastening Systems

Industrial Division Brands

TM

North America Global

Waco Operations Kingston Operations Telford Operations Tokyo Operations (Japan & Korea)
PO Box 8117 1 Corporate Drive Unit C, Stafford Park 7 8F CIRCLES Nihonbashi-
8001 Imperial Drive Kingston, NY 12401 Telford, Shropshire Bakurocho Bldg
Waco, TX 76714-8117 Tel: +1 800-278-4825 England TF3 3BQ 1-5-12 Nihonbashi-Bakurocho
Tel: +1 800-388-4825 Fax: +1 845-334-7333 Tel: +44 (0) 1952-290011 103-0002 Tokyo Japan
Fax: +1 800-798-4825 sales.kingston@howmet.com Fax: +44 (0) 1952-290459 Tel: +81-3-5642-8360
huck.waco@howmet.com sales.telford@howmet.com Tel: +81-3-5642-8361 x8365
Fax: +81-3-5644-5772
Tracy Operations Melbourne Operations
1925 North MacArthur Drive 1508 Centre Road Suzhou Operations
Tracy, CA 95376 Clayton, Victoria 58 Yinsheng Road,
Tel: +1 800-826-2884 Australia 3168 SIP Suzhou, Jiangsu
Fax: +1 800-573-2645 Tel: +613-8545-3333 215126 China
sales.idg@howmet.com Fax: +613-8545-3390 Tel: +86-512-62863800-8888
hfsmel.sales@howmet.com

hfsindustrial.com
YouTube.com/HFSIndustrial

The information contained in this publication is only for general guidance,

and is not intended to create any warranty, express, implied, or statutory;
all warranties are contained only in Howmet Fastening Systems’ written
quotations, acknowledgments, and/or purchase orders. It is recommended
that the user secure specific, up-to-date data and information regarding © 2021 Howmet Aerospace Inc. All rights reserved. HFS5513 0321
each application and/or use of such products. C50L, Powerig, and HuckBolt are trademarks of Howmet Aerospace Inc. and/or its subsidiaries.