C50L HuckBolt

® ®

Huck-engineered
lockbolts for the most
challenged applications
Vibration resistant
Longer fatigue life
Consistent installations

1/2" - 1-3/8"
 C50L HuckBolt
® ®

Grade 5 fasteners certified to meet or exceed all ASTM A-325 standards.

For applications ranging from railcar to mining equipment

manufacturing, C50L® HuckBolt® fasteners from Arconic

Fastening Systems and Rings offer superior vibration

resistance and overall durability. Heavy-duty applications

demand tough, reliable fasteners. And extensive testing has

demonstrated that C50L HuckBolt fasteners meet or exceed

the performance of torqued bolts in both shear and tensile

strength (with a longer fatigue life). Value is built in, too. Over

the lifetime of your product, the investment you make in the

quality of C50L HuckBolt fasteners will pay for itself. You won’t

find a stronger, more reliable fastening system, no matter what

your application.

2
Installs safer and quieter

The C50L HuckBolt system is engineered to be installed without torquing or multiple impacts. Noise level is significantly
reduced, and as a result, your installation area becomes quieter, less stressful, and more productive.

1 2 3 4

The pin is inserted into the prepared The installation tool is applied to the The nose anvil starts to swage the When swaging of the collar into
hole and the smooth bore collar is pintail. When the tool is activated, the collar into the lockgrooves on the pin. the lockgrooves is complete, the
placed on the pin jaws in the nose assembly pull on the Continued swaging causes the collar pintail separates from the pin which
pintail and the nose anvil pushes on to lengthen and develop clamp. completes the installation cycle.
the collar to remove any gap.

Successful, consistent installations

Unlike threaded fasteners, the C50L HuckBolt delivers consistent

installation results. High costs of calibrating, maintaining, and
replacing tools are eliminated. And installation does not require
expensive, highly experienced workers.

■ Swaged-on collar forms a permanent,

vibration-proof connection

■Initial long length of fastener

enables pull-out of large gaps

■ Pre-load remains consistant from

installation-to-installation

For Oversized Holes: To optimize clamp, hardened

washers such as ASTM F436, DIN 6916 or EN 14399-6
are recommended for use with oversize holes and slots,
along with good bolting practice.

3
 C50L HuckBolt data and dimensions
® ®

Head style options

Round 90° Flush Stainless Cap
C A C50LR C50L90 C30C

B
Truss Large Truss Thread Head
C50LT C50L30 C50LH
min. grip
D
E

Fastener dimensions
Truss Head 90° Flush Stainless Steel Thread Head
Round Head C50L30
C50LT Head Capped Head C50LH
Diameter Code A B C B C B C B C B C B C
1/2" 16 0.515 - 0.490 0.906 0.316 0.906 0.240 1.090 0.266 0.906 0.250 — v
5/8" 20 0.642 - 0.617 1.141 0.397 1.141 0.297 1.330 0.315 1.140 0.313 1.440 0.390 — —
3/4" 24 0.768 - 0.741 1.383 0.495 1.383 0.360 — — 1.370 0.375 — — — —
7/8" 28 0.895 - 0.866 1.610 0.550 1.610 0.420 — — 1.594 0.430 — — — —
1" 32 1.025 - 0.990 1.850 0.618 — — — — — — — — — —
1-1/8" 36 1.095 - 1.125 2.063 0.688 — — — — — — — — — —
1-3/8" 44 1.400 - 1.350 2.530 0.850 — — — — 2.510 0.670 — — — 1.688

Collar dimensions
Style Diameter F G H J K
Standard-LC 1/2"
J 0.515 - 0.535 0.800 - 0.765 0.645 - 0.610 — —

5/8" 0.650 - 0.665 0.985 - 0.970 0.875 - 0.8453 — —

G F K F G G F
3/4" 0.775 - 0.790 1.180 - 1.165 0.960 - 0.930 — —
LC
7/8" 0.915 - 0.920 1.375 - 1.360 1.113 - 1.083 — —
H H
H
1" 1.035 - 1.050 1.570 - 1.550 1.275 - 1.240 — —

Flanged-3LC1 1-1/8" 1.165 - 1.185 1.770 - 1.750 1.440 - 1.390 — —

J
1/2" 0.510 - 0.530 0.807 - 0.793 0.760 - 0.722 0.130 - 0.120 1.035 - 0.980

5/8" 0.648 - 0.660 0.996 - 0.980 0.962 - 0.926 0.170 - 0.142 1.273 - 1.227
K F G G F
3/4" 0.775 - 0.793 1.195 -1.175 1.150 - 1.115 0.200 - 0.175 1.520 - 1.480
3LC1
H H7/8" 0.895 - 0.907 1.370 - 1.360 1.333 - 1.300 0.230 - 0.205 1.615 - 1.575

1" 1.035 - 1.050 1.565 - 1.550 1.520 - 1.480 0.263 - 0.237 1.893 - 1.854
Low Profile-8LC2/ 1-1/8" 1.160 - 1.770 1.760 - 1.750 1.715 - 1.675 0.289 - 0.273 2.145 - 2.105
LC-2R
1/2 0.508 - 0.535 0.800 - 0.780 0.500 - 0.470 — —

5/8 0.640 - 0.665 0.982 - 0.972 0.700 - 0.670 — —

F G G F 8LC2 3/4 0.775 - 0.790 1.180 - 1.165 0.745 - 0.715 — —

7/8 0.903 - 0.920 1.375 - 1.360 0.863 - 0.833 — —

H
1.0 1.030 - 1.050 1.568 - 1.552 0.980 - 0.950 — —

AC-R44 1-3/8" 1.407 - 1.420 2.159 - 2.146 1.762 - 1.738 — —

1 When using 3LC collars, include J dimension in grip dimension to determine grip number.
2 Optional collar at reduced clamping force and tensile strength. Contact AFSR for data. When using 8LC collars,
subtract J dimension from grip dimension to determine grip number.
3 H length for 20 (5/8") diameter in F, I or 2CU material is 805 - 770.

4
 C50L HuckBolt data and dimensions
® ®

Grip tables
Grip 1/2" (16) 5/8" (20) 3/4" (24) 7/8" (28) 1" (32) 1-1/8" (36) 1-3/8" (44)
Grip
Range D E D E D E D E D E D E Grip range
4 .250 - .500 1.213 3.172 1.433 3.656 1.518 4.156 — — — — — — up to
8 .500 - .750 1.463 3.422 1.683 3.906 1.768 4.406 1.921 4.688 2.073 5.375 — — 34.25"
12 .750 - 1.000 1.713 3.672 1.933 4.156 2.018 4.656 2.171 4.938 2.323 5.625 — —
16 1.000 - 1.250 1.963 3.922 2.183 4.406 2.268 4.906 2.421 5.188 2.573 5.875 — — Call for data.
20 1.250 - 1.500 2.213 4.172 2.433 4.656 2.518 5.156 2.671 5.438 2.823 6.125 — —
24 1.500 - 1.750 2.463 4.422 2.683 4.906 2.768 5.406 2.921 5.688 3.073 6.375 — —
28 1.750 - 2.000 2.713 4.672 2.933 5.156 3.018 5.656 3.171 5.938 3.323 6.625 — —
32 2.000 - 2.250 2.963 4.922 3.183 5.406 3.268 5.906 3.421 6.188 3.573 6.875 — —
36 2.250 - 2.500 3.213 5.172 3.433 5.656 3.518 6.156 3.671 6.438 3.823 7.125 — —
40 2.500 - 2.750 3.463 5.422 3.683 5.906 3.768 6.406 3.921 6.688 4.073 7.375 — —
44 2.750 - 3.000 3.713 5.672 3.933 6.156 4.018 6.656 4.171 6.938 4.323 7.625 — —
48 3.000 - 3.250 3.963 5.922 4.183 6.406 4.268 6.906 4.421 7.188 4.573 7.875 — —
52 3.250 - 3.500 4.213 6.172 4.433 6.656 4.518 7.156 4.671 7.438 4.823 8.125 — —
56 3.500 - 3.750 4.463 6.422 4.683 6.906 4.768 7.406 4.921 7.688 5.073 8.375 5.250 8.563
60 3.750 - 4.000 4.713 6.672 4.933 7.156 5.018 7.656 5.171 7.938 5.323 8.625 5.500 8.813
64 4.000 - 4.250 4.963 6.922 5.183 7.406 5.268 7.906 5.421 8.188 5.573 8.875 5.750 9.063
68 4.250 - 4.500 5.213 7.172 5.433 7.656 5.518 8.156 5.671 8.438 5.823 9.125 6.000 9.313
72 4.500 - 4.750 5.463 7.422 5.683 7.906 5.768 8.406 5.921 8.688 6.073 9.375 6.250 9.563
76 4.750 - 5.000 5.713 7.672 5.933 8.156 6.018 8.656 — — 6.323 9.625 6.500 9.813
80 5.000 - 5.250 5.963 7.922 — — — — — — 6.573 9.875 6.750 10.063
84 5.250 - 5.500 — — — — — — — — 6.823 10.125 7.000 10.313
88 5.500 - 5.750 — — — — — — — — 7.073 10.375 7.250 10.563
—
92 5.750 - 6.000 — — — — — — — — 7.323 10.625 7.500 10.813

Installed fastener values

Carbon Steel Pins 2024C Aluminum Pins 6061F Aluminum Pins Hole data
LC-2R or 3LC-2R Collars LC-F or 3LC-F Collars LC-I or 3LC-I Collars
Diameter Max Hole
Diameter Shear Clamp Tensile Shear Clamp Tensile Shear Clamp Tensile 1/2" 0.563
1/2" 14400 12050 17050 7300 5900 7850 5300 4400 4900 5/8" 0.688
5/8" 22500 19200 27100 11400 9200 12300 8300 6900 7670 3/4" 0.813
3/4" 32400 28400 40100 16400 13300 17700 11900 9950 11040 7/8" 0.938
7/8" 43400 39250 55450 1" 1.063
s p e c i a l o r d e r o n l y
1" 56500 51500 72700 1-1/8" 1.188
1-1/8" 69500 58450 82950 — — — — — — 1-3/8" 1.500
1-3/8" 100000 85000 129500 — — — — — —
D
Inspection data
Diameter Pin Part No. LC Collar 3LC Collar A max B max C min D max
B A
1/2" C50L( )-( )16 LC-2R16G 3LC-2R16G .063 .375 .406 .733
5/8" C50L( )-( )20 LC-2R20G 3LC-2R20G .063 .375 .625 .916
3/4" C50L( )-( )24 LC-2R24G 3LC-2R24G .063 .375 .656 1.110 C
7/8" C50L( )-( )28 LC-2R28G 3LC-2R28G .063 .375 .750 1.282
1" C50L( )-( )32 LC-2R32G 3LC-2R32G .063 .375 .875 1.465
LC collar
1-1/8" C50LR-BR36 LC-2R36G — .063 .625 .906 1.646
1-3/8" C50LR-BR44 AC-R44U — .188 .688 1.250 2.020
3LC flanged collars

5
 C50L HuckBolt Installation Tooling
® ®

Hydraulic Tools & Nose Assemblies

Model 2620 Model 2620PT Model 2624 Model 3585 Model 2630 Model 507 Model 12142

Nose Assembly
1/2" 99-5000 99-5002 99-5021 99-5021
5/8" 99-5008 99-5008
3/4" 99-5010
7/8" 99-5014
1" 99-5016
1-1/8" 99-5019
1-3/8" Integral

2620/2620-PT* 2624 3585 2630 507 12142

Tooling weight and dimensions

Model Weight Length Height Width

2620/2620-PT *
10.4/11.0 lbs. 6.60"/10.10" 7.0" 2.82"

2624 13.9 lbs. 7.37" 7.73" 3.48"

3585 18.5 lbs. 7.84" 10.36" 4.02"

Powerig
2630 22.3 lbs. 7.90" 8.65" 4.44"
Model 918/
507 43.4 lbs. 15.50" 6.00" 5.40" 918-5

12142 60.0 lbs. 11.76" 6.56" 6.56" Powerig

Model 940
For limited clearance installation tools contact manufacturer.
*
Pass through

Huck Powerig® hydraulic units

Model 918/918-5 Model 940 Model 913H not shown Model 968 not shown

High-production applications Portable; production and repair Portable; production and repair Portable; production and repair

918 powers 2 tools (2 gpm/tool)

70 in.3/min. flow rate (.3 gpm) 139 in.3/min. flow rate (.6 gpm) 70 in.3/min. flow rate (.3 gpm)
918-5 powers 3 tools (1.3 gpm/tool)

Electrically powered; Electrically powered; Air powered; 50 cfm

Gasoline powered
220, 440, or 550 volts, 3 phase 115 or 220 volts, single phase (.024 m3/s)
Weighs 585/601 lbs. without Weighs 66 lbs. without Weighs 122 lbs. without Weighs 75 lbs. without
hydraulic fluid hydraulic fluid hydraulic fluid hydraulic fluid

44"l x 25"w x 30"h 13.9"l x 16.1"w x 18.5"h 24"l x 21"w x 27"h 10.45"l x 16.33"w x 15.68"h

6
Ordering Information

Follow the form below to construct a part number for ordering C50L pins and their respective collars.
Refer to the Grip Tables (page 5) for grip numbers.

Pins
C50L (HEAD STYLE) - (MATERIAL) (DIAMETER) - (GRIP NUMBER) - (COATING)
Example: C50LR-BR16-4 is a C50L HUCKBOLT fastener, Round Head, Carbon Steel, 1/2" Diameter, Grip 4

Bolt Head Style Prefix Bolt Material Code Diameter Code Grip Finish Suffix

Round R 1/2" 16 Zinc Plate, Clear

Carbon Steel BR G
Chromate .0003"
Truss T 5/8" 20 Refer to
Large Truss 30 3/4" 24 Grip Tables Zinc Plate, Clear
Aluminum 2024 and 6061 GA
on page 5 Chromate .0004"
90° Flush 90 special order only 7/8" 28
Geomet - 1 Coat NP
Thread Head H Stainless Steel available on request 1" 32
Geomet - 2 Coat D1
1-1/8" 36
1-3/8" 44 Geomet - 3 Coat DL
Oil Finish no suffix

Collars

(COLLAR STYLE) - (MATERIAL) (DIAMETER) (COATING) (OPTIONS)

Example: LC-2R16G is a Standard Collar, Low Carbon Steel, 1/2" Diameter, Zinc Finish

Collar Style Prefix Material Code Diameter Code Coating Code Options Suffix

Standard LC- 1/2" 16 Zinc G Tab-Lok L

Low Carbon Steel 2R
Flanged 3LC- 5/8" 20 Additional coating
Low Profile 8LC- Aluminum 3/4" 24 options available
Low Profile (44) AC-R44 special order only 7/8" 28
1" 32
Tab-Lok™
1-1/8" 36
1-3/8" 44
The Tab-Lok feature makes sure
the collar stays on the pin,
before installation, in overhead
and down slanted
pin placements.
To order Tab-Lok
collars refer to
adjacent charts.

7
 Arconic Fastening Systems and Rings

TM

Arconic Inc. (NYSE: ARNC) creates breakthrough products that shape industries, providing solutions to complex engineering
challenges to transform the way we fly, drive, build, and power. Combining ingenuity and advanced manufacturing, we
deliver products that meet the challenges and demands faced by our customers.

Arconic Fastening Systems and Rings, formerly Alcoa Fastening Systems & Rings, is a global leader in fastening technology.
Offering the greatest breadth and depth of fastening system solutions in the industry, Arconic continues to reflect the same
commitment to product quality and support that customers have come to expect. To serve its growing market, Arconic
Fastening Systems and Rings maintains corporate offices worldwide. In addition, Arconic distributors are located in many key
industrial centers throughout the world, providing a ready supply of fasteners, installation tools, tool parts, and application
assistance.

Americas International Locations

Waco Operations Carmel Operations Kolkata Operations Suzhou Fasteners Operations
8001 Imperial Drive 14300 Clay Terrace Blvd. Unit no. 28, Chowringhee 58 Yinsheng Road, Shengpu
Waco, TX 76712, USA Suite 250 Court Suzhou Industrial Park
P.O. Box 8117 Carmel, IN 46032, USA 55/1, Chowringhee Road Suzhou Jiangsu 215126
Waco, TX 76714-8117, USA Tel: 800 826 2884 Kolkata – 700071 China
Tel: 800 388 4825 Fax: 800 573 2645 India Tel: 0512 62863800-8888
Fax: 800 798 4825 Tel: +91 33 4069 9170/80 Fax: 0512 62863810
Tacubaya Operations
Fax: +91 33 4069 9184
Kingston Operations Avenida Parque Lira Telford Operations
1 Corporate Drive 79-402 Tacubaya Tokyo Operations Unit C, Stafford Park 7
Kingston, NY 12401, USA Mexico C P 11850 Arconic Japan Ltd. Telford, Shropshire TF3, 3BQ
Tel: 800 278 4825 Tel: +52 55 5515 1776 #1013 NBF Hibiya Bldg. United Kingdom
Fax: 845 334 7333 Fax: +52 55 5277 7564 Uchisaiwai-cho, Chiyoda-ku Tel: +44 1952 2900 11
Tokyo 100-1011 Fax: +44 1952 2904 59
Tracy Operations São Paulo Operations
Japan
1925 North MacArthur Drive Av. Nações Unidas, 12.901 St. Cosme Operations
Tel: +81 3 3539 6577
Tracy, CA 95376, USA Torre Oeste, 3º andar 9 rue de Cressonnieres
Fax: +81 3 3539 6585
Tel: 800 826 2884 São Paulo – SP – Brasil 72110 Saint Cosme en Varais
Fax: 800 573 2645 04578-000 Melbourne Operations France
Tel: 0800 015 9888 1508 Centre Road Tel: +33 0 2.43.31.41.00
Fax: +55 11 5509 0200 Clayton, Victoria, 3168 Fax: +33 0 2.43.31.41.41
Australia
Kelkheim Operations
Tel: +61 3 8545 3333
Industriestr. 6
Fax: +61 3 8545 3390
65779 Kelkheim
Germany
Tel: +49 [0] 6195 8050
Fax: +49 [0] 6195 2001

AFSRHuck.net
YouTube.com/AFSIndustrial

The information contained in this publication is only for general

guidance, and is not intended to create any warranty, express,
implied, or statutory; all warranties are contained only in AFSR’s
written quotations, acknowledgments, and/or purchase orders. It
is recommended that the user secure specific, up-to-date data and
information regarding each application and/or use of such products.

© 2017 Arconic Fastening Systems and Rings. All rights reserved. AFS5513 0217