Professional Documents
Culture Documents
Part Catalage Cummins
Part Catalage Cummins
Option Name
AP6005 APPROVAL,AGENCY
BB6716 BLOCK,CYLINDER
BR6716 BREATHER,CRANKCASE
DA6149 DAMPER,VIBRATION
DL6010 LOCATION,DRAIN
EE6066 ALTERNATOR
EH6005 MOUNTING,ALTERNATOR
EH6702 DRIVE,ALTERNATOR
FA6174 DRIVE,FAN
FF6074 FILTER,FUEL
FH6048 HOUSING,FLYWHEEL
FP6864 PUMP,FUEL
FR6345 RATING,FUEL
FT60765 PLUMBING,FUEL
FW6043 FLYWHEEL
LA6706 ARRANGEMENT,LIFTING
OP6077 PAN,OIL
PH6713 SENSOR,SPEED
PP2888 PARTS,PERFORMANCE
PP6778 PLUMBING,INJECTOR
PP6786 TURBOCHARGER
RL6707 LEVER,ROCKER
RP6001 PLUMBING,RADIATOR
SC6964 SOFTWARE,CALIBRATION
SG6040 GUARD,ALTERNATOR
ST6061 MOTOR,STARTING
TB6021 ARRANGEMENT,TURBOCHARGER
TB6731 MANIFOLD,EXHAUST
TB6752 AFTERCOOLER
TH6712 HOUSING,THERMOSTAT
TP6726 PLUMBING,TURBOCHARGER
VC6008 COVER,VALVE
WF6021 RESISTOR,CORROSION
WM6707 MANIFOLD,WATER
WP6012 PUMP,WATER
Back
Back
*AD6016-01
Back
*3332255
Back
Y Application: Power
Back
Back
Y To be used on qsk60 2
stage
Y engines only.
Back
*4017240
Back
*4001096
Back
Back
Y $R.B. Cam
Y $Water Pump
Back
Back
Back
Y product: Qsk
Y Application: Mounting
Y location:.
10 3902663 S ADD Y Screw, Hex Flange Head Cap 1 M10 x 1.50 x 120
Back
*4065353
Back
Back
Y cover.
Back
Y Number Of Dampers: 2
Y diameter: 162.5mm
Y Number Of Grooves: 31
N 520mm.
Back
Y drive.
Y Front: 13
Y Rear: 13
Y flange.
Back
Y mounting.
Y N/A
Y Drive location
Y rear: Yes
Back
Y left (FP )
Y (15.55 inch)
Y inch)
Y flare
Y Unique Characteristics:
Y tubing.
Back
Y Application: Genset
Y instrumentation package:
Y Standard
Back
Back
Y RB - electric starter: RB -
Y customer
Y Alternator:
Y qsk60 engines.
Back
Y manufacture/model: Cummins
Y branded
Y Voltage: 24
Y Yes
Y Manufacturing/model:
Y Prestolite-lna4024/8.
Back
Y alternator manufacture:
Y alternators: 1
Y Model:
Y Prestolite Lna4024/8
Y description: 5 groove pk
Y section v ribbed
Y centerline: 644.37mm
N centerline: Engine
N v-ribbed.
Back
Y no of alternators: 1
Y v-ribbed
Y description: 5 groove pk
Y manufacture:
Back
Y Type: Trunnion
Back
Y fan pulley
Y Centerline:
Y Fan Center:
Y description: Pk section v-
Y Drive Ratio:
Y Customer Supplied
Y hub:
Y Customer supplied
Y drive limitations:
Y (LB/FT) TBD
Y installation requirements:
Y washers) no
Back
Y Number Of Elements: 3
with
Y side of engine
Y filtration measure in
micron:
Y orientation: Down.
Y from Fleetguard.
Back
Y SAE: 0
Y 345.52 MM
Y provision: No
Y Tachometer Sensor
Mounting
Y Hole: Three
Y Tachometer sensor
mounting
Y starter mounting.
Back
Back
Y hardware.
Back
6 3904446 S ADD Y Screw, Hex Flange Head Cap 4 M10 X 1.50 X 70.
Back
Y Application: Power
Y Generation rating
Y designation: Qsk60-G4
Y RPM
Y 1500 RPM
Y At 1500 RPM
Y CPL: 2888
Y aftercooler type: 2 p2 l
Back
Y pointing down.
Y To be used on QSK 45
and QSK
Y 60 engines.
Back
Y Customer Supplied: No
Y diameter: 99.972mm
Back
Y engines
Back
Y Between cylinder
Y and 8.
Back
Back
Y oil filter
Y no. of elements: 4
mounting
Y location: RB bypass
Y provision: Yes
Back
LG6028-01 S ADD Y Oil Level Gauge Location Oil level gauge location
Y 0
Y Location: #3 LB
Y Dipstick Location:
N Centerline Of Crankshaft:
N 42mm.
Back
Y To be used on quantum
qsk60
Y engine.
Back
Y Location
Y (4.8in)
Y (standard).
Back
Y Centerline Of Crankshaft:
Y 23mm
Y TBD
Y qsk engines.
Back
Y oil pan
Y Material: Aluminum
N pan
N Unique Characteristics:
Back
Back
PH6722-04 S ADD Y Engine Control Module Plum Plumbing, eng cnt module
Y Air Compressor: No
Y Bracket mounts on
Y rearmost fuel
Y forwards.
Back
Back
01.07 Camshaft
06.01 Injector
Y CPL: 2888
Y AFC: No
Y ASA: No
Y EFC: No ETC: No
Y Engine Aspiration:
Y Turbocharged
Y Application: Power
Y Generation
N provision: No.
Back
PP2888 N Camshaft
Back
Back
PP2888-01 N Injector
Back
Back
Y for QSK60.
Back
Y qsk60 G4 unregulated.
Back
Y Number Of Grooves: 5
groove
Y desription: Pk section v-
Y front of engine.
Back
Y capability: Type:.
Back
Y To be used on QSK60
Y Applications: all
Back
Y QSK60 engines.
Back
Y Voltage: 24
Y Grounding insulated.
Y Positive kitted: No
Y flange.
Back
Y CPL: 2888
Y centinel provision: No
Y version: D_104004
Y Centinel - no.
Back
Y Alternator:
Y 3.56:1
Back
Y Air.
Back
Y type:
Y Starting motor
Y Voltage: 24 manufacturer:
Y count: 2
Y Method Of Engagement:
Y Positive
Back
Y out
Y Aspiration:
Y Turbocharger, Aftercooled,
Y Single stage
Y Unique Characteristics:
Back
Y engines.
Y Includes mounting
hardware
Y and plumbing.
16 3903990 S ADD Y Screw, Hex Flange Head Cap 4 M10 X 1.50 X 20.
Back
Y engines only.
Back
Y engines.
23 3900634 S ADD Y Screw, Hex Flange Head 204 M10 X 1.50 X 50.
Cap
Back
Y gen non-taluft.
Back
Y To be used on qsk60
engines
Y with HX82/83
turbochargers.
Back
Y Unique Characteristics:
Y industrial engines.
Back
Y Stage.
Back
Y spin-on cartridge.
Y Mounting location: On LB
Y units.
Back
Y stage engines.
Back
Y connection.
Y Inlet outside
Y (4.62inches)
Y Unique Characteristics:
Back
Y provision to plumb
Y turbocharger: No single
N No.
Back
Y direction of outlet
Y No Structure
Back
Y internal or external:
Y US gallons/min at 1900
RPM
Y restriction. Qsk60
engines:
Y Approx. 585 US
gallons/min
Y external restriction.
Y engines.
Back
Y exhaust plumbing of
customer.
Y Kitted: Yes
Y Outlet outside
Y Unique Characteristics:
Y circle.
Back