300 Series Regulators

The 312 Series regulators are intended for primary pressure

control of non-corrosive, high purity or liquefied gases for
applications requiring constant pressure control and delivery
regardless of supply pressure variations.

• Dual Stage
• Chrome-Plated Brass Barstock Body
• Four Port Configuration
• 316L Stainless Steel Diaphragm

Typical Applications
EPA Protocol gases
Gas and liquid chromatography
High purity carrier gases
Zero, span, and calibration gases
High purity chamber pressurization

312 2331-580 shown

Features Materials Specifications

CAPSULE® Seat Body Maximum Inlet Pressure
Increased serviceability and life Chrome-plated brass barstock 3000 PSIG (210 BAR)
316L Stainless Steel Diaphragm Bonnet 3500 PSIG (240 BAR) optional
No inboard diffusion Chrome-plated die-cast zinc 4500 PSIG (310 BAR) optional

Low Wetted Surface Area Seat Temperature Range

Minimal purge requirements PTFE -40°F to 140°F (-40°C to 60°C)

Field-Adjustable Pressure Limit PCTFE with 3500 PSIG (240 BAR) Gauges
Safeguard downstream equipment or 4500 PSIG (310 BAR) inlet option 2" (53mm) diameter chrome-plated
Filter brass
Convoluted Diaphragm
Smooth pressure changes 10 micron sintered bronze Ports
Diaphragm 1/4” FPT
Compact Design
Easily transported and integrated into 316L stainless steel Helium Leak Integrity
systems Internal Seals 1 x 10-8 scc/sec

Chrome-Plated Brass Barstock Body PTFE Cv

Smooth surface finish 0.1
See page 188 for flow curves
10 Micron Filtration in Both Stages
Fail-safe seat performance Weight (312 2331-580)
4.4 lbs. (1.98 kg)
Pressure Ranges 0-15 to 0-250 PSIG
(0-1 to 0-17 BAR)
Broad range of applications

CRN OH 5216.5R1

132 CONCOA Research & Specialty Gas CONCOA • 1.800.225.0473 • www.CONCOA.com

 300 Series Regulators
Installation
InstallationInformation
Dimensions

Ordering Information
312 A B C D -CON Options
Series Outlet Pressure Outlet Gauge Inlet Gauge Outlet Assemblies Assembly Gauges Inlet Connections Installed Options
312
1: 0-15 PSIG 30”-0-30 PSIG/ 0: None 0: 1/4” FPT port 0: Bare body 000: 1/4” FPT B: Protocol alarm
(0-1 BAR) -1-0-2 BAR station (110/220 VAC)
2: 0-50 PSIG 30”-0-100 PSIG/ 3: 0-4000 PSIG/ 1: 1/4" MPT 1: Standard assembly TF2: 1/8" tube C: Protocol
(0-3.5 BAR) -1-0-7 BAR 0-275 BAR (PSIG/kPa gauges) switchover station
3: 0-100 PSIG 30”-0-200 PSIG/ 5: 0-1000 PSIG/ 2: 1/4" tube fitting 2: Standard assembly TF4: 1/4" tube H: Protocol
(0-7 BAR) -1-0-14 BAR 0-70 BAR (BAR/PSIG gauges) switchover station
with alarm
(110/220 VAC)
4: 0-250 PSIG 0-400 PSIG/ 6: 0-300 PSIG/ 3: Diaphragm valve 1/4" TF6: 3/8" tube M: Protocol station
(0-17 BAR) 0-27 BAR 0-21 BAR tube fitting
7: 0-150 PSIG 30”-0-200 PSIG/ 7: 0-400 PSIG/ 4: Diaphragm valve 1/4" M06: 6mm tube Q: Protocol purge
(0-10 BAR) -1-0-14 BAR 0-27 BAR MPT station*
8: 0-6000 PSIG/ 5: Needle valve 1/4" MPT CGA T: Tee purge*
0-405 BAR* DIN 477
BS 341
G: 0-4000 PSIG/ 6: 1/8" tube fitting and others *Not available with
0-275 BAR† available 4500 PSIG (310
BAR) max inlet
*Maximum inlet 7: 3/8" tube fitting pressure
pressure 4500
PSIG (310 BAR) 8: Diaphragm valve 1/8"
with PCTFE Seat tube fitting
CAPSULE®
9: Diaphragm valve 1/4”
†Maximum inlet FPT
pressure 3500 A: 3/8” BSP RH fitting
PSIG (240 BAR)
with PCTFE seat B: Diaphragm valve 3/8"
CAPSULE® tube fitting
C: 3/8” BSP LH fitting
D: 6mm brass hose barb
(not available if A=4 or 5)
G: 1/8” stainless steel tube
fitting
H: 1/4” stainless steel tube
fitting
M: 6mm tube fitting
S: Diaphragm valve 6mm
tube fitting

CONCOA • 1.800.225.0473 • www.CONCOA.com CONCOA Research & Specialty Gas 133

 250 (17)
OUTLET PRESSURE - PSIG (BAR)

500 PSIG (34 BAR) IN

200(14)
2000 PSIG (137 BAR) IN

150 (10)

100 (7)

50 (3.5)

0
0 250 500 750 1000 1250
(117) (235) (353) (470) (590)
FLOW RATE = SCFH (LPM)