Catalog 1835-5/USA Vacuum Components

Vacuum Switch Accessories

xxx

VACUUM SWITCH WITH LED DISPLAY

• LED display for better visibility
• Compact size
• Hysteresis mode and window
• Comparator mode and window
• High precision and high reliability
• Automatic teaching mode is equipped to allow easy and
proper setting
• Digital
• Cable included

SPECIFICATIONS
Pressure Range: 14.7 to 0 PSIA (0 to -760 mmHg) Venting Port: M3
Units Displayed: mmHg, kPa, bar, inHg Pressure Port: 1/8" NPT
Max Pressure: 5 kgf/cm3 Protection Structure: Conforming to IP65 except cable
Media: Non-corrosive gas which is IP40
Operating Temperature: 32° to 122°F (0 to 50°C) Power Supply: DC 10.8 to 30V, max. 10% ripple
Operating Humidity: 35 to 85% RH (no condensation) Current Consumption: 45 mA or less
Repeatability: ±1% of F.S. or less Vibration Resistance: 10 to 55 Hz, 1.5 mm amplitude,
Output: NPN (N), open collector, XYZ, 2 hours
max. 125 mA, 2 points Shock Resistance: 1000 m/s2 (approx. 100G) XYZ
Display: 3-digit and 7-segmented LED Spike Protection: 350 VP -P, 10 ms, 0.5 µ s
(character height 8mm) Dielectric Strength: AC 1000 V for one (1) minute
Display Frequency: 5 times / second Material:
Protection Circuit: Reverse wiring protection, Body Polycarbonate
surge absorption, Pressure Port Zinc diecasting

Vacuum
over-current protection Weight: .08 lb. (35 g), not including cable

D
PART NUMBER P5V-SAVN12C

DIMENSIONS

1/8 NPT
.63 (16) 2.323 (59)

.984 (25) .709 (18)

2 x 2M x .4

37 Parker Hannifin Corporation

Automation Actuator Division
Automation Wadsworth, OH 44281
Catalog 1835-5/USA Vacuum Components
Vacuum Switch xxx
Accessories

DIAPHRAGM STYLE VACUUM SWITCH

• 1/4" BSP pipe connections
• 5/32" instant valve body connections
• Snap action switch operates when the fluid being
monitored reaches a preset pressure.

SPECIFICATIONS
Pressure Range:
Switch Body 40 to 120 PSI (3 to 8 bar)
Operating Head -14 to 7250 PSI (-1 to 500 bar)
Flow at 90 PSI (6 bar): 7.4 SCFM (210 l/mn ANR)
Nominal Bore: 1/8"
Operating Temperature: 5° to 140°F (-15° to 60°C)
Repeatability: Variation from differential setting
<2% (between 2 consecutive
cycles)
Maximum Operating
Frequency: 30 operations/minute
SETTING
Vibration Resistance: 4g (10 to 500 Hz)
Turn the ring until the lower part
Shock Resistance: 100g of the ring corresponds with the
Degree of Protection: NEMA4 (IP65) setting required as indicated on
Materials: the scale. Setting can be verified
Switch Body Zinc alloy by connecting a pressure gauge
Operating Head Brass and cadmium steel to the fluid suply line. 0.3 BAR 35.PSI

BARS G8 PSI

Operating Positions: All positions VAI 116 PSI

NVA : 8 PRES

ORDERING INFORMATION
Range Adjustment* Differential Range** Maximum Admissible
Model Number Type of Switching Min. Max. Lower Upper Pressure***
3" Hg 30" Hg 2.4" Hg 3" Hg 1.5 PSI
PXMJB111091 NNP
(-0.1 bar) (-1 bar) (-0.08 bar) (-0.1 bar) (0.1 bar)
3" Hg 30" Hg 2.7" Hg 3" Hg 1.5 PSI
PXMJB121091 NP
(-0.1 bar) (-1 bar) (-0.09 bar) (-0.1 bar) (0.1 bar)

* Adjustment range is minimum and maximum adjustment limitations between which the upper operating point can be set.
** Upper differential is the pressure hysterisis at maximum adjusted pressure setting. Lower differential is the pressure
hysterisis at minimum adjusted pressure setting.
*** Maximum admissible pressure is the maximum pressure the switch can withstand per cycle without affecting its
performance or life expectancy.

38 Parker Hannifin Corporation

Automation Actuator Division
Automation Wadsworth, OH 44281
Catalog 1835-5/USA Vacuum Components
Vacuum Switch xxx
Accessories

DIMENSIONS
38
38
= 30 =
25
13

11
11

41
12
21
28

4XØ5,2

142
inch mm
a 1.10 28
b .83 21
c .47 12
d .43 11
e .51 13 5,4
f .94 24

16
ØG 1/4" female 33

20 / 22 19 16

MOUNTING

Vacuum
D
On the fluid supply line By the bracket supplied By the pneumatic switch body

CONNECTION

Integrated damping gasket

diminishes the hammering effect
of accidental pressure.

Using parallel threaded Using taper threaded connector

connector with sealing o-ring PTFE sealing compound

39 Parker Hannifin Corporation

Automation Actuator Division
Automation Wadsworth, OH 44281
Catalog 1835-5/USA Vacuum Components
Vacuum Switch Accessories
xxx

VACUUM SWITCH TRANSDUCER

A field adjustable vacuum switch transducer converts a
pneumatic signal to an electrical signal. This is a membrane
type switch that activates when the vacuum level exceeds
the field adjustable switchpoint.

SPECIFICATIONS
Port: 1/8" NPT
Voltage: 24 DC (125 AC optional)
Set point: 5 to 30 inches Hg
Repeatability: ± 2% at 70°F (x°C)
Hysteresis: 25% of preset value
Max. pressure: 350 PSI
Temperature range: -40° to +176°F
-40° to +80 °C
Electrical loading: Inductive: 5 Amp
Resistive: 7 Amp
Electrical connection: DIN43650A SET POINT ADJUSTMENT
Material:
Body Black anodized aluminum 1. Remove DIN adaptor.
Diaphragm Epichlorohydrin 2. Remove small brass screw.
Weight: 0.5 lb (.23 kg) 3. Using 1/8" Allen wrench, adjust counter-clockwise to
Type: Digital increase set point or clockwise to decrease set point.
4. Reverse steps 1 & 2 for reassembly.

PART NUMBER P5V-VSVN12C

DIMENSIONS

A
50
Key inch mm
A 1.97 50
B 4.00 101
C 1.24 31.6
D .76 19.3
E .39 10
F .53 13.5
G .80 20.3
B108

NV 29
20,3
G
13,5
F
10
E

1/8"
G1/8
D
19,3
C
31,6

40 Parker Hannifin Corporation

Automation Actuator Division
Automation Wadsworth, OH 44281
Catalog 1835-5/USA Vacuum Components
Vacuum Cutoff Valve xxx
Accessories

VACUUM CUTOFF VALVE

Use a vacuum cutoff valve to maintain vacuum in cases
where one or more suction cups in a system are not in
contact with the workpiece.

Vacuum
check valve

At a specific pressure difference, a ball is pressed by the

flow of air against the valve seat, closing the valve and
restricting vacuum loss. A built-in filter prevents blockage of
the valve. DATA
P5V-XLS91 P5V-XLS92
Application: Vacuum flow
• When handling flat workpieces with different dimensions. at vacuum pressure 0.13 scfm 0.14 scfm
• If one of the suction pads pulls away from the workpiece -8.9 in Hg (-0.3 bar) (3.7 l/min) (4.0 l/min)
during handling, the cutoff valve immediately closes. Vacuum flow
at vacuum pressure 0.25 scfm 0.27 scfm
• Can be installed either directly before the suction pad or -17.7 inHg (-0.6 bar) (7.1 l/min) (7.7 l/min)
in the connection hose (can also be grouped).
Max. flow during
Characteristics: rapid release .008 scfm .01 scfm
• Low leakage flow P = 72.5 psi (5 bar) (.22 l/min) (.29 l/min)
• Function is independent of the suction cup size Port 1/8" NPT 1/4" NPT
Material Aluminum
• Can be installed in any orientation

Vacuum
Flow

D
DIMENSIONS 0.38 (9.6) 1/4 NPT
1/8 NPT
0.56 (14)

1.92 (49)
2.31 (59)

1/8 NPT 1/4 NPT

41 Parker Hannifin Corporation

Automation Actuator Division
Automation Wadsworth, OH 44281
Catalog 1835-5/USA Vacuum Components
Gauge and Muffler Accessories
xxx

VACUUM GAUGE
Vacuum gauges are used to measure and indicate vacuum
pressure in pneumatic systems.

SPECIFICATIONS
Connection: 1/8" NPT bottom connection
Design: Bourdon tube (Beryllium copper)
Range: 0 to 30 inches Hg
Accuracy: ± 3-2-3% of full scale
Material:
Case Black steel
Connection Brass
Pointer Black aluminum
Window Glass
Dial Face: 2" diameter

PART NUMBER: P5V-DSN1

MUFFLERS
Mufflers are used in exhaust ports on vacuum generators.
Vacuum mufflers offer greater air flow with less pressure
drop than sintered bronze mufflers, while providing noise
dampening characteristics.

DATA
P6M-PA92 P6M-PA93 P6M-PA94 PM6-PA96
Port (NPT or BSP) 1/4 3/8 1/2 3/4
Media Air
Pressure 0 - 130 PSI (0 - 9.2 bar)
Temperature -41° to 140°F (-40° to 60°C)
Body Material Acetal
Weight, oz. (g) .22 (6.2) .68 (19.3) 3.07 (87) 4.44 (126)

A (NPT or BSPP)

DIMENSIONS
Inches (mm)
A ∅B C D
.77 .31 1.37 ∅B
P6M-PA92 1/4
(19.5) (8) (35)
.96 .43 1.85
P6M-PA93 3/8
(24.5) (11) (47) C
.96 .43 1.85
P6M-PA94 1/2
(24.5) (11) (47)
P6M-PA96 3/4
1.9 .7 3.83 D
(48) (18) (97)

42 Parker Hannifin Corporation

Automation Actuator Division
Automation Wadsworth, OH 44281
Catalog 1835-5/USA Vacuum Components
Air Filters xxx
Accessories

FILTERS
Air filters are designed to remove airborne solid contami-
nants from the suction line.

FEATURES:
• Unique deflector plate creates a swirling of the air stream,
ensuring maximum dirt separation.
• Easily disassembled for servicing without the use of tools.

GENERAL CHARACTERISTICS:
Operating temperature: 32° to 125°F (0° to 52°C)

DATA

Part # Port Rated Flow Bowl Bowl Filter Element Pressure Body Seals Drain
(NPT) SCFM (l/min) Capacity Range
75 micron prefilter 0 - 50 PSI
ILN40P05011 1/8" 2.1 (60) — — Nylon Silicone —
30 micron filter (0 - 3.5 bar)
14F01AA 1/8" 2.4 (68) 1 Oz.
06F11AC 1/4" 5.9 (167) 4.4 Oz.
0 - 125 PSI
06F21AC 3/8" 8.4 (238) 4.4 Oz. Polycarbonate 40 micron Zinc Nitrile Manual Twist
(0 - 8.6 bar)
07F31AC 1/2" 13.5 (382) 7.2 Oz.
07F41AC 3/4" 14.9 (422) 7.2 Oz.

Vacuum
D
➤ A ➤
➤

➤
A
➤

DIMENSIONS
D
Part # A B C D
➤

1.83" 3.25" — —
ILN40P05011
➤

46.5 mm 82.5mm — — A C
➤

1.69" 3.82" .39" — C

14F01AA
43 mm 97 mm 9.9mm —
➤

06F11AC 2.81" 5.69" .53" 2.74"

06F21AC 71 mm 145 mm 13 mm 70 mm
B B
07F31AC 3.24" 6.97" .70" 3.25" B
07F41AC 82 mm 177 mm 18 mm 83 mm
➤

ILN40P05011 14F01AA 06F*1AC

07F*1AC

43 Parker Hannifin Corporation

Automation Actuator Division
Automation Wadsworth, OH 44281