M SC - Chemistry

I.
ABOUT THE DEPARTMENT
The Chemistry teaching started in 1922 with three constituent colleges St. Stephens, Hindu and Ramjas.
The chemistry teaching was confined to a two year course for B. Sc. Degree department and the teaching
up to I.Sc. Level was conducted in the constituent colleges of the University. In October 1933, the
University offices and Library shifted to the Viceregal Lodge Estate and the chemistry department made
an inconspicuous beginning in the Viceregal kitchen which was used for conducting the lectures and
practical classes. In 1942, new Laboratories and lecture rooms were constructed and visionary faculty
members were invited by special efforts of illustrious Vice Chancellor, Sir Maurice Gwyer.
In June 1949, Professor TR Seshadri took over as head of the department and owing to his untiring
effort, the research activities gradually increased, and the department attained formidable reputation in
the international scene as one of the finest schools of chemistry. In 1963, the University Grants
Commission recognized the department of chemistry as a Centre of Advanced Study for the Chemistry
of Natural Products. In 1965, the department of chemistry was recognized as a Centre of Advanced
Study in Chemistry.
In eighties several faculty members joined the department and the department expanded rapidly in terms
of both research and teaching and a large number of small independent groups started flourishing.
Various faculty members made significant contributions in computational chemistry, biopolymers,
physical chemistry of polymers, organic synthesis, medicinal chemistry, apart from the structure
elucidation of natural products, biotransformations, chemical communications, structure investigation of
metal complexes, organometallic chemistry and analytical chemistry. After the year 2000 new group of
faculty members joined the department with specialization in newer areas that included biomolecular
structures, synthesis of nucleosides, medicinal chemistry, electrochemistry and material chemistry. With
advent of the new era of materials and nanomaterials other young and energetic faculty members have
also joined the department. With this input the department is marching forward in newer areas of
research and teaching.
The Department of Chemistry is well known for its excellence in teaching and research. The faculty
members of the department are engaged in state of the art research as well as guiding the Ph.D., M. Tech.
M. Sc. and Post Doctoral Students. The Department has made great strides by revising and updating the
M. Sc. syllabus time and again. A thoroughly updated and revised M. Sc. syllabus has been implemented
in the year 2009. In the international year of chemistry, the Department started new project work in M.
Sc. syllabus where students have exposure of writing the project and also develop communication skills.
Advanced level optional courses are also offered at the Ph.D. levels and these courses are taught
semester wise. Collaborative research programmes with many research laboratories and research
institutes in Delhi and outside India are also operating very successfully with mutual benefit.
The Department has distinguished itself as a centre for innovative and pioneering research in a wide
range of areas in chemistry and chemistry interfacing with physical and biological sciences. It has
attained the status of a DST-FIST Sponsored department by DST in 1982. The department is recognized
as one of the best performing chemistry department in the country by DST in the International Year of
Chemistry (2011).
1
II- INTRODUCTION TO CBCS (CHOICE BASED CREDIT SYSTEM)
The CBCS provides an opportunity for the students to choose courses from the prescribed courses
comprising core, elective/minor or skill-based courses. The courses can be evaluated following the
grading system, which is considered to be better than the conventional marks system. Grading system
provides uniformity in the evaluation and computation of the Cumulative Grade Point Average (CGPA)
based on student's performance in examinations which enables the student to move across institutions of
higher learning. The uniformity in evaluation system also enables the potential employers in assessing
the performance of the candidates.
Definitions:
(i) 'Academic Programme' means an entire course of study comprising its programme structure, course
details, evaluation schemes etc. designed to be taught and evaluated in a teaching
Department/Centre or jointly under more than one such Department/ Centre
(ii) 'Course' means a segment of a subject that is part of an Academic Programme
(iii) 'Programme Structure' means a list of courses (Core, Elective, Open Elective) that makes up an
Academic Programme, specifying the syllabus, Credits, hours of teaching, evaluation and
examination schemes, minimum number of credits required for successful completion of the
programme etc. prepared in conformity to University Rules, eligibility criteria for admission
(iv) 'Core Course’ means a course that a student admitted to a particular programme must successfully
complete to receive the degree and which cannot be substituted by any other course
(v) 'Elective Course' means an optional course to be selected by a student out of such courses offered in
the same or any other Department/Centre
(vi) 'Open Elective' means an elective course which is available for students of all programmes,
including students of same department. Students of other Department will opt these courses subject
to fulfilling of eligibility of criteria as laid down by the Department offering the course.
(vii) ‘Credit’ means the value assigned to a course which indicates the level of instruction; One-hour
lecture per week equals I Credit, 2 hours practical class per week equals I credit. Credit for a
practical could be proposed as part of a course or as a separate practical courses
(viii) 'SGPA' means Semester Grade Point Average calculated for individual semester.
(ix) 'CGPA' is Cumulative Grade Points Average calculated for all courses completed by the students at
any point of time. CGPA is calculated each year for both the semesters clubbed together.
(x) 'Grand CGPA' is calculated in the last year of the course by clubbing together of CGPA of two years,
i.e., four semesters. Grand CGPA is being given in Transcript form. To benefit the student a formula
for conversation of Grand CGPA into %age marks is given in the Transcript'
2
III- Programme Details:
Master of Science (M.Sc.) in Chemistry
Programme Objectives (PSOs):
1. To provide a broad foundation in Chemistry that stresses scientific reasoning and analytical
problem solving with a molecular perspective.
2. To make the Department a growing center of excellence in teaching, cutting-edge research,
curriculum development and popularizing Chemistry.
3. To provide students with the skills required to succeed in M.Sc. the Chemical industry or
professional school.
4. To make international collaborations for students and faculty exchange and research
cooperation.
5. The Department would like to attain worldwide recognition in Chemistry research and teaching.
6. To expose the students to a breadth of experimental techniques using modern instrumentation.
7. The Department also endeavours to contribute to industry and address problems of societal
importance.
8. The Department also aims at Chemistry outreach in the form of books, online courses, and other
Chemistry education activities that showcase the role of Chemistry as a central science.
Programme Outcomes (PSOs):
At the completion of the M.Sc. Chemistry program, the students of our Department will be able to:
PSO1: Work in the interdisciplinary and multidisciplinary areas of chemical sciences and its
applications.
PSO2: Analyze the data obtained from sophisticated instruments (like FTIR, NMR, GCMS, HPLC,
GCMS UVVis, Fluorescence, and TGA) for the structure determination and chemical analysis.
PSO3: Apply green/sustainable chemistry approach towards planning and execution of research in
frontier areas of chemical sciences.
PSO4: Have sound knowledge about the fundamentals and applications of chemical and scientific
theories
PSO5: Apply appropriate techniques for the qualitative and quantitative analysis of chemicals in
laboratories and in industries.
PSO6: Helps in understanding the causes of environmental pollution and can open up new methods for
environmental pollution control.
PSO7: Acquires the ability to synthesize, separate and characterize compounds using laboratory and
instrumentation techniques.
PSO8: Carry out experiments in the area of organic analysis, estimation, separation, derivative process,
inorganic semi micro analysis, preparation, conductometric and potentiometric analysis
PSO9: Learns about the potential uses of analytical industrial chemistry, medicinal chemistry and green
chemistry.
PSO10: Understands the background of organic reaction mechanisms, complex chemical structures, and
instrumental method of chemical analysis, molecular rearrangements and separation techniques.
3
Programme Structure:
The Master of Science in Chemistry course is a Two Year Full Time Course consisting of our
semesters, to be known as Semester I, Semester II, Semester III and Semester IV.
Part I First Year Semester I Semester II

Part II Second Year Semester III Semester IV
Course Credit Scheme

Semester Core courses Elective courses Open elective courses Total
No. of Credits Total No. of Credits Total No. of Credits Total credits
papers (L+T/P) credits papers (L+T/P) credits papers (L+T/P) credits
I 3 12 + 6(P) 18 0 0 0 0 0 0 18
II 3 12 + 6(P) 18 0 0 0 0 0 0 18
III 3 12 12 1(P) 8(P) 8 1 4 4 24
4+1(P)+ 16 +
IV 0 0 0 1(RP) 8(P)+4(RP) 28 0 0 0 28
Total credits for the course 48 32 4 88
N.B.: 84 credits as core/elective courses and 4 credits as open elective course are compulsory
to obtain the M.Sc. degree.
4
Semester-wise Details of Chemistry Course
Semester I
Number of core courses Six (3 Theory + 3 Practical)
Credits in each course
Theory Practical Tutorial Total
Core course 1 4 2 0 6
Total credits in core course 18
Number of elective courses Nil

Total credits in elective course 0
Total credits in Semester I 18
Semester II
Number of core courses Six ( 3 Theory + 3 Practical)
Number of elective courses Nil

Total credits in Semester II 18
Semester III
Number of core courses Three ( 3 Theory)
Number of elective courses One ( 1 Practical)

Elective practical 1 0 8 0 8
Number of open electives One

Credits in each open elective
Open elective 1 4 0 0 4
Total credits in open elective 4
Total credits in Semester III 24
5
Semester IV
Number of core courses Nil

Number of elective courses Four ( 3 Theory + 1 Practical)

Review
Theory Practical Project Total
Elective course 1 4 0 0 4
Elective practical 2 0 8 0 8
Review/ Research Project 0 0 1 4
Total credits in Semester IV 28

Total credits of the course = 18 + 18 + 24 + 28 = 88
6
MASTER OF SCIENCE IN CHEMISTRY COURSE
Examination and Scheme of Papers
(i) The duration of the course for the degree of Master of Science in Chemistry shall be two
academic years.
(ii) All the papers listed below are to be taught in two parts (Courses A and B).
(iii) The course is divided into four semesters and there shall be an examination at the end of each
semester as given below:
Scheme of Papers
Part I
Semester I
Paper No. Title Duration of Maximum Marks Credits
Examination
(Hours)
Paper 101 Inorganic Chemistry – I 3 100 4
Stability Constants of Metal
Complexes and Their
Applications
/ Supramolecular and
Photoinorganic Chemistry
(Core course 1)
Paper 102 Organic Chemistry – I 3 100 4
Reactive Intermediates in
Organic Chemistry /
Stereochemistry of Organic
Compounds
(Core course 2)
Paper 103 Physical Chemistry – I 3 100 4
Quantum Chemistry/
Mathematical Methods
(Core course 3)
104-I Inorganic Chemistry – I Continuous 50 2
(Practical core course 1) Evaluation
104-O Organic Chemistry – I Continuous 50 2

104-P Physical Chemistry – I Continuous 50 2

TOTAL 450 18
7
Semester II
Paper No. Title Duration of Maximum Marks Credits
Examination
(Hours)
Paper 201 Inorganic Chemistry – II 3 100 4
Group Theory and its
Applications / Chemistry of
d-and f-block Elements
(Core course 4)
Paper 202 Organic Chemistry – II 3 100 4

Spectroscopy of Organic
Compounds / Reagents and
Methods of Organic
Synthesis
(Core course 5)
Paper 203 Physical Chemistry – II 3 100 4
Statistical Mechanics &
Thermodynamics,
Electrochemistry, Kinetics
and Macromolecules
(Core course 6)
Inorganic Chemistry – II Continuous
204-I (Practical core course 4) Evaluation 50 2
Organic Chemistry – II Continuous

204-O (Practical core course 5) Evaluation 50 2
Physical Chemistry-II Continuous

204-P 50 2
(Practical core Course 6) Evaluation
TOTAL 450 18
Note: Each of the Practical Chemistry Papers shall be based on continuous evaluation. 25% of the total marks
for the Practical shall be reserved for the Laboratory Record/ Sessional Work of the candidates and 15% marks
for viva-voce.
30 marks (24 marks for internal exam and 6 marks for attendance) in each theory paper are reserved for internal
assessment.
8
Part II
Semester III
Paper Title Duration of Maximum Credits

No. Examination Marks
(Hours)
Inorganic Chemistry – III Inorganic Reaction

Paper 3 4
Mechanisms / Catalysis and Bio-inorganic 100
301
Chemistry (Core course 7)
Organic Chemistry-III
Paper Photochemistry & Pericyclic Reactions / 3 100 4
302 Medicinal Chemistry
(Core Course 8)
Physical Chemistry-III
Paper Molecular structure : Spectroscopic and
3 100 4
303 diffraction methods
(core course 9)
Inorganic Chemistry (Special - I)
Chemistry of Inorganic Rings, Cages and
Paper
Metal Cluster Compounds / Introduction to 3 100 4
3101*
the Solution of Multielectron Problems
(Open Elective-1)
Paper Inorganic Chemistry (Special - II)
* Introduction to Nanochemistry 3 100 4
3102
(Open Elective-1)
Organic Chemistry (Special - I)
Paper Chemistry of Life Processes & Bioactive
# 3 100 4
3201 Compounds
(Open Elective-1)
Organic Chemistry (Special-II)
Paper Polymer Chemistry & Processing and Role of
# 3 100 4
3202 Catalysis in Chemical Synthesis
(Open Elective-1)
Physical Chemistry (Special - I)
Paper Irreversible Thermodynamics, Transport
a Phenomena, Surface Phenomena & Fast 3 100 4
3301
Reactions
(Open Elective-1)
Paper Practical Inorganic Chemistry – I Continuous 200**
8
3103 (Elective practical 1) Evaluation
Paper Practical Organic Chemistry – I Continuous 200** 8
Paper Practical Physical Chemistry – I Continuous 200** 8
*Inorganic Chemistry Section will offer either Paper 3101 or 3102 as Open elective.
#
Organic Chemistry Section will offer either Paper 3201 or 3202 as Open elective
a
prerequisite: mathematics upto the +2 level for Paper 3301.
**The Practical Paper in each branch in Semester III shall be continuously evaluated.
25% of the marks will be reserved for the Laboratory Record/ Sessional work of the candidates and
9
15% marks for viva-voce.
Semester IV
(1) Inorganic Group:

(Hours)
Inorganic Chemistry (Special - III)
Paper 3 100 4
4101 Spectral Techniques in Inorganic Chemistry
(Elective course 1)
Inorganic Chemistry (Special - IV)
Paper Organotransition Metal Chemistry / Bio-
4102 3 100 4
inorganic Chemistry
(Elective course 2)
Inorganic Chemistry (Special - V)
Paper Analytical Techniques 3 100 4
4103
(Elective course 3)
Inorganic Chemistry (Special - VI)
Paper Materials / Nuclear and Radiochemistry
4104
* 3 100 4
(Elective course 4)
Inorganic Chemistry (Special -VII)
Paper Green Chemistry: An interdisciplinary
* 3 100 4
4105 approachtowards sustainable development
(Elective course 5)
Paper Practical Inorganic Chemistry – II Continuous 200# 8
Paper Review Project 2 days x 6 = 100## 4
4107 12
* Inorganic Chemistry Section will offer either Paper 4104 or 4105 as 4th elective.
#
Out of 200 marks for practicals (continuous evaluation), 25% of these marks will be
reserved for the Laboratory Record/ Sessional work of the candidates and 15% marks for
viva-voce.
##
The Review Project includes submitting a Dissertation and making a presentation.
10
(2) Organic Group:

(Hours)
Organic Chemistry (Special - II)
Paper Advanced Organic Synthesis / Supramolecular
Chemistry and Carbocyclic Rings 3 100 4
4201
(Elective course 1)
Organic Chemistry (Special - III)
Paper Terpenes and Steroids / Alkaloids and
4202 Polyphenols 3 100 4
(Elective course 2)
Organic Chemistry (Special - IV)
Paper Newer Synthetic Reactions and
4203 Reagents / Heterocyclic Chemistry 3 100 4
(Elective course 3)
Organic Chemistry (Special -V)
Paper Biomolecules
4204
* 3 100 4
(Elective course 4)
Organic Chemistry (Special -VI)
Paper* Pharmaceutical Techniques
4205 Technologies Development 3 100 4
(Elective course 4)
Paper Practical Organic Chemistry – II (Elective Continuous #
4206 practical 2) evaluation 200 8
##
Paper Review Project 2 days x 6 = 12 100 4
4207
*Organic Chemistry Section will offer either paper 4204 or 4205 as 4th elective.
#
Out of 200 marks for practicals (continuous evaluation), 25% of these marks will be reserved for the
Laboratory Record/Sessional work of the candidates and 15% marks for viva-voce.
##
The Review Project includes submitting a Dissertation and making a presentation
11
(3) Physical Group:
Duration of
Examination Maximum
Paper No. Title Marks Credits
(Hours)
Physical Chemistry Special

Paper 4301 Advanced Statistical Mechanics 3 100 4
(Elective)
Paper 4302 Advanced Electrochemistry 3 100 4
(Elective)
Advanced Photochemistry &
Paper 4303 3 100 4
Radiation Chemistry
(Elective)
Paper 4304 Computational Methods in Chemistry 3 100 4
(Elective)
Paper 4305 Advanced Quantum Chemistry 3 100 4
(Elective)
Paper 4306 Advanced Chemical Kinetics 3 100 4
(Elective)
Paper 4307 Advanced Molecular Spectra 3 100 4
(Elective)
Paper 4308 Crystal Structure 3 100 4
(Elective)
Paper 4309 Macromolecules 3 100 4
(Elective)
Paper 4310 Biophysical Chemistry 3 100 4
(Elective)
Paper 4311 Physical Chemistry of Materials 3 100 4
(Elective)
Practical Physical Chemistry - II Continuous #

Paper 4312 200 8
(Elective) evaluation
Paper 4313 Review Project 2 days x 6 = 12 100 4
GRAND TOTAL (M.Sc. Course) 2200 88
Note: Papers belonging to physical chemistry teaching in semester-IV may combine any two parts, viz. course A
or course B, of same or different elective papers (4301 to 4311). These combined courses will form 4 elective
papers.
12
#
Out of 200 marks for practicals (continuous evaluation), 25% of these marks will be
reserved for the Laboratory Record/ Sessional work of the candidates and 15% marks for
viva-voce.
##
The Review Project includes submitting a Dissertation and making a presentation.
Notes:
(1) At the beginning of Semester III, the students will be required to choose their specialization, viz. Inorganic,
Organic or Physical Chemistry and take Elective papers accordingly. They will take one Special Paper
(Open elective 1) in Semester III and four Papers of the specialization of their choice or, alternatively, three
special papers (Electives) of the specialization of their choice and one paper out of the open elective papers
offered by their specialization or other Science Departments in Semester III. They will also have to take
two Special Practical Papers (Elective practicals, one each in Semester III and IV). For Physical Chemistry
(Special) Semester IV, the options available as Electives and the elective (from among Physical Chemistry
Special Papers 4301 - 4311) will be notified at the Chemistry Department website before the session starts.
Mathematics upto at least the +2 level is a prerequisite for the Physical Chemistry Open Electives.
(2) *The two Practical Papers in each branch in Semesters III and IV shall be continuously evaluated. 25% of
the marks will be reserved for the Laboratory Record/ Sessional work of the candidates and 15% marks for
viva-voce.
(3) 30 marks (24 marks for internal exam and 6 marks for attendance) in each theory paper are reserved for
internal assessment.
(4) Mathematics up to the +2 level is a prerequisite for Open Electives from Physical Chemistry.
Selection of Elective Courses:

As per University / Department Guidelines
13
Eligibility for Admissions:
Category
Course Requirements Marks Requirements
Id
B.Sc. (Hons.) Chemistry (3Years Course after 10+2)
from University of Delhi or any other University whose
examination is recognized as equivalent to University of
Delhi fulfilling other conditions of eligibility. Candidate 55% or above marks in
1 must have passed 10+2 (Senior Secondary) or equivalent aggregate or equivalent
examination recognized by the University of Delhi with grade.
Mathematics as one of the regular subjects and B.Sc.
(Hons.) Chemistry examination with at least two papers
of Mathematics.
B.Sc. (Genl.)/B.Sc. (Pass)/B.Sc. (Prog.) (3 years course
after 10+2) from University of Delhi or any other
University whose examinations are recognized as
equivalent to Delhi University fulfilling other conditions
of eligibility. Candidate must have passed 10+2 (Senior 55% or above marks in
2 aggregate or equivalent
Secondary) or equivalent examination recognized by the
grade.
University of Delhi with Mathematics as one of the
regular subjects and B.Sc. (Genl.)/B.Sc. (Prog.)/ B.Sc.
Pass examination with at least two papers of
Mathematics.
Eligibility for Merit
B.Sc. (Hons.) Chemistry from University of Delhi only 60% or above marks in
3 aggregate or equivalent
with at least two papers of Mathematics
grade.
14
Assessment of students’ Performance and Scheme of Examinations:
1. English shall be the medium of instruction and examination.
2. Examinations shall be conducted at the end of each Semester as per the Academic
Calendar notified by the University of Delhi.
3. The system of evaluation shall be as follows:
3.1 Each course will carry 100 marks, of which 30 marks shall be reserved for internal
assessment based on classroom participation, seminar, term courses, tests and attendance.
The weightage given to each of these components shall be decided and announced at the
beginning of the semester by the individual teacher responsible for the course. Any
student who fails to participate in classes, seminars, term courses, tests, will be debarred
from appearing in the end-semester examination in the specific course and no Internal
Assessment marks will be awarded. His/her Internal Assessment marks will be awarded
as and when he/she attends regular classes in the course in the next applicable semester.
No special classes will be conducted for him/her during other semesters.
3.2 The remaining 70 marks in each paper shall be awarded on the basis of a written
examination at the end of each semester. The duration of the written examination for
each paper shall be three hours.
3.3 A candidate is allowed to reappear ONLY in THEORY papers to improve his/her

previous performance.
4. Examinations for courses shall be conducted only in the respective odd and even
semesters as per the Scheme of Examinations. Regular as well as Ex-Students shall be
permitted to appear/ re-appear/ improve in courses of Odd Semesters only at the end of
Odd Semesters and courses of Even Semesters only at the end of Even Semesters.
Pass Percentage and Promotion Criteria:

Examination scheme as per university rule applicable for M.Sc. course
Attendance Requirement:
As per the prevailing ordinance on the attendance required shall be applicable.
Span Period:
No student shall be admitted as a candidate for the examination for any of the Parts/ Semesters after
the lapse of 4 years from the date of admission to Part-I/ Semester-1 of the M. Sc. Chemistry
Programme.
15
Guidelines for the Award of Internal Assessment marks Chemistry Programme (Semester Wise)
Theory marks of Internal Assessment= 12 marks
For Attendance marks details following below:
Organic,
Inorganic
Physical
More than 67% but less than 70% 0.6
More than 85% and above 3
16
IV- Course Wise Content Details for Chemistry Programme
Master of Chemistry
Semester-I
Paper 101- Inorganic Chemistry-I (Core course 1)

Marks : 100 Duration: 3 hrs
Course Objective: To impart advanced knowledge on the analytical chemistry aspects of

complexometric titration sand to comprehend the stability, reactions of supra molecular complexes of
alkali metal and other univalent ions.
Course A: Stability constants of metal complexes and their applications

Stoichiometric and thermodynamic equilibrium constants, stepwise formation of complexes,
formation functions, φ, n and αC and relationship between different functions. Calculation of stability
constants. Graphical Methods: using sets of data {φ, [A]}; {αC, [A]} and {n, [A]}. Curve fitting
method, Elimination method, Numerical method, Potentiometric method, Method of corresponding
solutions, Ion exchange method, Solvent extraction, Polarographic method and Spectrophotometric
methods, which include Job's method of continuous variation, Logarithmic method, Bent and French
mole ratio method. Turner and Anderson methods and Yatsimirskiis method.
Analytical applications of complex formation; gravimetric analysis, complexometric titrations

(Conditional constants, titration curves, titration error, detection of end point using metal indicators
and instrumental methods. Indicator errors, Indicator correction, etc. Simultaneous titrations, stepwise
titrations, back titrations). Use of masking and demasking agents in complexometric titrations.
Course B: Supramolecular and Photoinorganic Chemistry
Introduction: Molecules and Supramolecules, Supermolecules, Large Molecules Classification,

Nomenclature, Thermodynamic and Kinetic selectivity, Supramolecular interactions, Supramolecular
host design, Macrocyclic versus acyclic hosts, Chelate Macrocyclic and macrobicyclic hosts, High
dilution synthesis, Template synthesis
Molecular recognition: Receptors, design and synthesis of co-receptors and Multiple recognition,
Hydrogen bonds, strong, weak and very weak H-bonds, Utilisation of H-bonds to create
supramolecular structures, Use of H-bonds in crystal engineering and molecular recognition, Chelate
and macrocyclic effects.
Cation binding hosts, binding of anions, binding of neutral molecules, binding of organic molecules.
Redox reactions of metal complexes in excited states, excited electron transfer, examples using
[Ru(bpy)3]2+ complex and [Fe(bpy)3]3+ complex. Role of spin-orbit coupling, life-times of excited
states in these complexes.
Metal complex sensitizers: Electron relay, semiconductor supported metal oxide systems, water-
photolysis, nitrogen fixation and CO2 reduction.
Course/Learning Outcomes: This will equip the learner on the analytical applications of
complexometric determination of metal ions along with the various ways of analyzing data derived
17
from different experiments. Along the similar lines, various factors affecting the alkali metal ion
complexes which are supramolecular in nature will be perceived by the students which have direct
consequence to targeted drug delivery sensor and other real time applications.
Recommended Texts:
1. Christian, G. D., Analytical Chemistry, 6th Ed., John Wiley & Sons, Inc. (2004).
2. Khopkar, S.M., Basic Concepts of Analytical Chemistry 3rd Edition, Publisher: New Age International
Publishers (2008), ISBN: 9788122420920, 8122420923.
3. Eldik, R. V.; Stochel G. Advances in Inorganic Chemistry: Inorganic Photochemistry, Volume 63, 1st
Edition, Academic Press (2011)
4. Hartley, F. R., Burgess, C. & Alcock, R. M. Solution Equilibria. Prentice-Hall: Europe (1980).
5. Atwood, J. L. & Steed, J. W. Supramolecular Chemistry: A Concise Introduction John Wiley & Sons (2000).
6. Lehn, J. M. Supramolecular Chemistry: Concepts & Perspectives, Print ISBN:9783527293124
Wiley-VCH (2006).
7. Desiraju, G. R., Ed. Perspectives in Supramolecular Chemistry, Vol. 2: Crystal Engineering and Molecular
Recognition Wiley: Chichester (1995).
8. Srivastava and Mishra, Fundamental of Analytical Chemistry (First Edition, 2016)
9. Robinson, J.W, Undergraduate Instrumental Analysis, CRC Press (2014).
10. Inczedy, J. Analytical applications of complex equilibria Halsted Press: New York, NY (1976).
Practical core course 1 (50 Marks/ 2 credits)
Course Objective: To practically apply the concepts learnt about complexometric titrations and to
optimize errors arising from various sources in titrimetric estimations.
Inorganic Chemistry – 101
1. Quantitative analysis of mixtures of metal ions by complexometric titrations (mixture of two
metals) with the use of masking and de-masking agents.
2. Any other experiments done in the class during the semester.
_____________________________________________________________________________________
18
Paper 102- Organic Chemistry-I (Core course 2)
Marks : 100 Duration : 3 hrs.
Course Objective: To impart advanced knowledge of reactive intermediates, stereochemistry of

organic compounds, pericyclic and photochemical reactions.
Course A: Reactive Intermediates in Organic Chemistry

A review of reaction mechanisms including methods of determination.
Linear free energy relationships and their applications (Hammett equation and modifications).
Carbocations: Classical and non-classical, neighbouring group participation, ion-pairs, molecular
rearrangements in acyclic, monocyclic and bicyclic systems, stability and reactivity of bridge-head
carbocations.
Carbanions: Generation, structure and stability, ambident ions and their general reactions; HSAB
principle and its applications.
Free Radicals: Generation, structure, stability and reactions, cage effects; radical-cations & radical-
anions, SRN1 mechanisms.
Carbenes: Formation and structure, reactions involving carbenes and carbenoids.
Nitrenes: Generation, structure and reactions of nitrenes.
Arynes: Generation and reactivity of arynes, nucleophilic aromatic substitution reactions, SNAr
mechanism; Ipso effect.
Course B: Stereochemistry of Organic Compounds
Molecular symmetry and chirality: Symmetry operations and symmetry elements, point group
classification and symmetry number.
Stereoisomerism: Classification, racemic modification, molecules with one, two or more chiral
centres; Configuration nomenclature, D L, R S and E Z nomenclature. Axial and planar chirality and
helicity (P & M); Stereochemistry and configurations of allenes, spiranes, alkylidine cycloalkanes,
adamantanes, catenanes, biphenyls (atropisomerism), bridged biphenyls, ansa compounds and
cyclophanes.
Topicity and prostereoisomerism: Topicity of ligands and faces and their nomenclature;
Stereogenicity, chirogenicity, and pseudoasymmetry, stereogenic and prochiral centres.
Simple chemical correlation of configurations with examples, quasiracemates.
Cyclostereoisomerism: Configurations, conformations and stability of cyclohexanes (mono-, di-, and
trisubstituted), cyclohexenes, cyclohexanones, halocyclohexanones, decalins, decalols and decalones.
Asymmetric induction: Cram’s, Prelog’s and Felkin-Ahn model; Dynamic stereochemistry (acyclic
and cyclic), Qualitative correlation between conformation and reactivity, Curtin-Hammett Principle.
Molecular dissymmetry and chiroptical properties: Linear and circularly polarised lights, circular
birefringence and circular dichroism, ORD and CD curves, Cotton effect. The axial haloketone rule,
octant diagrams, helicity, and Lowe’s rule. Application of ORD and CD to structural and
stereochemical problems.
Course/Learning outcomes: Students will be expected to gain knowledge basic concept of symmetry
and chirality in the molecules their spatial arrangement, properties and reactivity of stereoisomers,
19
importance of the configuration of chiral organic compounds which will be useful pharmaceutical
industry where chemist works on stereo selective synthesis of compounds. Also, gain knowledge on
the formation, reactivity and stability of free radicals, and the structure, bonding, generation and
reactivity of carbenes and nitrenes, intra- and intermolecular addition reaction of carbenes to double
bonds.
Recommended Texts:
1. Carey, F.A. & Sundberg, R. J. Advanced Organic Chemistry, Parts A & B, Plenum: U.S. (2004).
2. Eliel, E. L. Stereochemistry of Carbon Compounds Textbook Publishers (2003).
3. Finar, I. L. & Finar, A. L. Organic Chemistry Vol. 2, Addison-Wesley (1998).
4. Finar, I. L. Organic Chemistry Vol. 1, Longman (1998).
5. Lowry, T. H. & Richardson, K. S. Mechanism and Theory in Organic Chemistry Addison-Wesley
Educational Publishers, Inc. (1981).
6. Nasipuri, D. N. Stereochemistry of Organic Compounds: Principles & Applications South Asia Books
(1994).
7. March, J. Advanced Organic Chemistry John Wiley & Sons (1992).
8. Singh S.P. and Om Prakash. Reaction Mechanism Laxmi Publications, Delhi (2017-18)
9. Kumar and Singh S.P. Pericyclic Reactions. Academic Press, London (2017-18)
Practical core course 2 (50 Marks/ 2 credits)
Course Objective: To develop experimental skills of various separation and purification

techniques and preparative TLCs and study of reactions involving different reactive
intermediates.
Organic Chemistry - 102
i) Measurement of optical rotation values, calculation of ee/de ratios and determination of
specific rotation
ii) Chemical resolution of racemic mixtures of acids with chiral amines or amines with chiral
acids
iii) Analytical and preparative TLCs (mixtures containing three or more compounds, natural
extracts and use of different developing agents)
iv) Preparations involving stereochemical aspects (geometrical isomers and steroisomers) and
different reactive intermediates:
(a) Condensation reaction,
(b) Bromine addition,
(c) Carbene addition,
(d) Nucleophilic aromatic/aliphatic substitution reaction,
(e) Rearrangement reactions involving carbocations and carbanions
v) Applications of UV and CD spectroscopy
Course/Learning Outcome: The students will acquire knowledge of:

1. Chromatographic separation and identification of organic compounds.
2. Purification, Crystallization, and different Distillation processes.
3. Determination of enantiomeric composition by a polarimeter.
4. Synthesis using substitution and condensation reactions.
__________________________________________________________________________________
20
Paper 103 - Physical Chemistry-I (Core course 3)
Course Objective: To impart basic and fundamental knowledge of quantum chemistry and
mathematical methods in chemistry. To practice problem solving through the understanding of
mathematical methods and principles of atomic, molecular and ionic systems.
Course A: Mathematical and quantum methods
Vectors: Differentiation and integration of vectors, scalar and vector fields, divergence & curl, Line
integrals. Orthogonal curvilinear coordinates. Spherical polar coordinates.
Linear vector spaces, linear independence, basis vectors, inner product, Dirac bra-ket notation.
Orthonormal sets. Completeness.
Linear operators, matrices as linear operators, geometrical operations. Properties of determinants.

Special types of square matrices: diagonal, symmetric and anti-symmetric, Hermitian and anti-
Hermitian, orthogonal matrices, unitary matrices, normal matrices. Eigenvectors and eigenvalues of
Hermitian and unitary matrices. Cayley-Hamilton theorem, degenerate eigenvalues. Gram-Schmidt
orthogonalization. Diagonalization of matrices. Change of basis and similarity transformation.
Limits and series. The extrema of a function and its critical points. Mean value theorem and
L’Hôpital’s rule, binomial expansion, tests of series convergence.
Fourier series, sine, cosine and exponential Fourier series. Fourier transform, Dirac delta function,
Fourier sine and cosine transforms, applications of Fourier transforms.
Laplace transform and its inverse, Solution of initial value problems using Laplace transform.
Ordinary differential equations (ODE) and Partial differential equations: Linear independence.
General solution of homogeneous equations. Power series solutions. Ordinary and singular points of
an ODE. Legendre polynomials. General solution for integer l and second solution.
Special functions: Properties of Legendre polynomials. Orthogonality, Rodrigues’ formula,

Generalized Fourier-Legendre series, generating function, Recursion formulae, Associated Legendre
polynomials. Hermite, Laguerre and associated Laguerre polynomials.
Ladder operators and recursion relations of Hermite polynomials, Generating functions, Rodrigues
Representation. Derivation of H-atom (energy quantization), Virial theorem and its applications to
harmonic oscillator and H-like atoms. Concept of spin, Stern-Gerlach experiment, algebra of two-
electron spin systems and determinantal wavefunctions.
Course B: Quantum Chemistry and Approximate Methods
Postulates of Quantum mechanics, Linear and Hermitian operators, Turn-over rule, Commutation of
operators and Uncertainty principle.
Some exactly soluble problems: Particle in a box (1-D, 2-D & 3-D) and ring. Concept of degeneracy
and Jahn-Teller distortion.
21
Simple harmonic oscillator problem and its solution using series solution or factorization method.
Calculation of various average values.
Angular momentum operators, Eigenvalues and eigen-functions, Rigid rotator and hydrogen atom
Complete solution. Radial distributions.
Approximate methods: First order time-independent perturbation theory for non-degenerate states.
Variation theorem and variational methods. Use of these methods illustrated with some examples
(particle in a box with a finite barrier, anharmonic oscillator, approximate functions for particle in a
box and hydrogen atom).
HMO method and its applications: π-Electron approximation, Huckel Molecular Orbital Theory of
conjugated systems, Calculation of properties- Delocalization energy, electron density, bond order,
non-alternant hydrocarbons. Pairing theorem. Electronic and ESR spectra. Effect of substituents on
spectra. Reactivity and electro-cyclic ring closures.
Chemical bonding: Born-Oppenheimer approximation. Variational treatment of hydrogen molecule

ion. Valence bond and MO (LCAO) treatment of hydrogen molecule. Comparison of the MO and VB
treatments and their equivalence limit. Configuration Interaction. Extension of MO theory to other
systems- Homonuclear and heteronuclear diatomics, polyatomics, Walsh diagrams for dihydrides,
linear and bent triatomics.
Ground and excited state of helium atom. Pauli’s Exclusion principle, Many-electron atoms.
Qualitative treatment of Hatree theory and Hartree-Fock SCF procedure through Slater Determinant
wavefunctions. Illustrated with some examples (particle in a box with a finite barrier, anharmonic
oscillator, approximate functions for particle in a box and hydrogen atom).
Course/Learning Outcomes:
Students will be expected to gain knowledge on the basic concepts and the quantitative understanding
of chemical phenomena requiring knowledge of quantum chemistry and mathematics. The first part of
course develops the relevant mathematical methods for chemistry. The second part of the course
develops basic skill for understanding of chemical systems and its phenomena at the atomic and
molecular level through the principles of quantum chemistry.
Recommended Texts:
1. Lowe, J. P. & Peterson, K. Quantum Chemistry Academic Press (2005).

2. McQuarrie, D. A. Quantum Chemistry Viva Books Pvt Ltd.: New Delhi (2003).
3. Mortimer, R. G. Mathematics for Physical Chemistry 2nd Ed. Elsevier (2005).
4. Pilar F. L. Elementary Quantum Chemistry 2nd Ed., Dover Publication Inc.: N.Y. (2001).
5. Atkins, P. W. & Paula, J. de Atkin’s Physical Chemistry 8th Ed., Oxford University Press (2006).
6. Levine, I. L. Quantum Chemistry 5th Ed., Prentice-Hall Inc.: New Jersey (2000).
7. Engel, T. & Reid, P. Physical Chemistry Benjamin-Cummings (2005).
8. McQuarrie, D. A. & Simon, J. D. Physical Chemistry: A Molecular Approach 3rd Ed., Univ.
Science Books (2001).
9. Silbey, R. J., Alberty, R. A. & Bawendi, M. G. Physical Chemistry 4th Ed. Wiley (2004)
10. Kreyszig, E., Advanced Engineering Mathematics, John Wiley & Sons, Inc. (2006)
22
Practical core course 3 (50 Marks/ 2 Credits)
Physical Chemistry - 104
Chemical Kinetics
1. Determine the specific rate constant for the acid catalyzed hydrolysis of methyl acetate by the
Initial Rate Method. Study the reaction at two different temperatures and calculate the
thermodynamic parameters.
2. Compare the strengths of hydrochloric acid and sulphuric acid by studying the rate of
hydrolysis of methyl acetate.
3. Study the saponification of ethyl acetate with sodium hydroxide volumetrically.
Conductometry
1. (i) Determine the Cell Constant of the given conductivity cell at room temperature and study
the equivalent conductance versus square root of concentration relationship of a strong
electrolyte (KCl or NaCl) and weak electrolyte (acetic acid).
(ii) Determine the equivalent conductance at infinite dilution for acetic acid by applying
Kohlrausch’s law of independent migration of ions.
(iii) Determine the equivalent conductance, degree of dissociation and dissociation constant
(Ka) of acetic acid.
2. (i) Study the conductometric titration of hydrochloric acid with sodium carbonate and
determine the concentration of sodium carbonate in a commercial sample of soda ash.
(ii) Study the conductometric titration of potassium sulphate solution vs. barium chloride
solution
3. Study the conductometric titration of
(i) Acetic acid vs. sodium hydroxide,
(ii) Acetic acid vs. ammonium hydroxide,
(iv) HCl vs. NaOH
Comment on the nature of the graphs.
4. Study the stepwise neutralization of a polybasic acid e.g. oxalic acid, citric acid, succinic acid
by conductometric titration and explain the variation in the plots.
Potentiometry
1. Titrate hydrochloric acid and sodium hydroxide potentiometrically.
(ii) Determine the dissociation constant of acetic acid potentiometrically.
(iii) Titrate oxalic acid and sodium hydroxide potentiometrically.
2. Titrate a mixture of
(i) Strong and weak acids (Hydrochloric and acetic acids)
(ii) Weak acid (acetic acid) and dibasic acid (oxalic acid)
(iii) Strong acid (hydrochloric acid) and dibasic acid (oxalic acid) versus sodium
hydroxide.
3. Titrate a solution of Mohr's salt against potassium permanganate potentiometrically. (ii).
Titrate a solution of Mohr’s Salt and potassium dichromate potentiometrically.
23
Computational Methods
Familiarity with word processing, electronic spreadsheets, data processing, mathematical packages,
chemical structure drawing and molecular modelling.
(Note. Any other experiment may be introduced during the year)
Potentiometry
2. Titrate hydrochloric acid and sodium hydroxide potentiometrically.
(ii)Determine the dissociation constant of acetic acid potentiometrically.
(iii)Titrate oxalic acid and sodium hydroxide potentiometrically.
2. Titrate a mixture of
(iv) Strong and weak acids (Hydrochloric and acetic acids)
(v) Weak acid (acetic acid) and dibasic acid (oxalic acid)
(vi) Strong acid (hydrochloric acid) and dibasic acid (oxalic acid) versus sodium
hydroxide.
3. Titrate a solution of Mohr's salt against potassium permanganate potentiometrically. (ii).

Titrate a solution of Mohr’s Salt and potassium dichromate potentiometrically.
Computational Methods
Familiarity with word processing, electronic spreadsheets, data processing, mathematical packages,
chemical structure drawing and molecular modelling.
(Note. Any other experiment may be introduced during the year)
____________________________________________________________
24
SEMESTER – II
Paper 201-Inorganic Chemistry-II (Core course 4)
Marks : 100 Duration : 3 hrs
Course Objective: To impart advanced knowledge on fundamental aspects of classifying molecules

based on various symmetry elements, point groups and relate their vibrational spectroscopic feature.
Additionally, qualitative molecular energy construction employing group theoretical principles will be
comprehended.
Course A: Group Theory and its Applications

Molecular symmetry: Symmetry elements and symmetry operations, definition of group and its
characteristics, subgroups, classes, similarity transformation.
Products of symmetry operations, equivalent atoms and equivalent symmetry elements, relations
between symmetry elements and operations, classes of symmetry operations, point groups and
classification.
Symmetry: Optical activity and dipole moment.
Representation of groups, reducible and irreducible representations. The Great Orthogonality theorem,
character tables, position vector and base vector as basis for representation.
Wavefunctions as bases for irreducible representations (p- and d-orbitals). Direct product.
Spectral transition probability, vibronic coupling, non-centrosymmetric complexes, polarization of
allowed transitions.
Application of Group Theory in Infrared and Raman Spectroscopy.
SALCs, projection operators, illustrative examples.
Hybridization and its applications, Hybrid orbitals as Linear Combinations of Atomic Orbitals.
Selected examples. MO diagram using Group Theory.
Symmetry and chemical reactions.
Course B: Chemistry of d-and f-block elements:
Term-symbols, Russel-Saunders states, Crystal field theory and splitting in Oh, Td, D4h and C4v
systems, Orgel and Tanabe-Sugano diagrams, determination of Dq and Racah parameters, oxidation
states and electronic absorption spectra of complex ions. Spectrochemical series and effects of
covalency. Nephelauxetic series, magnetic properties of transition metal complexes and lanthanides,
metal-metal bonds, cluster compounds of d-block elements, poly-oxo metallates of Ru, Os, Mo.
Structure and bonding in complexes containing π-acceptor ligands. Relativistic effects affecting the
properties of heavier transition elements.
Course/Learning Outcomes: The importance of structure, bonding stemming from the basic
symmetry concept and their relation will be the learning out comes. Especially, its relevance to
inorganic compounds containing d- and f-block elements of the periodic table as the central metal ion
will be elucidated. This basic knowledge will enable students to understand vibration spectroscopy of
these compounds. Additionally, the magnetic interactions of existing in systems containing these
metal ions will be understood.
25
Recommended Texts:
1. Jaffe, H. H. & Orchin, M. Symmetry in Chemistry Dover Publications (2002).
2. Cotton, F. A. Chemical Applications of Group Theory Wiley Interscience: N.Y (1990).
3. Hatfield, W. E. & Parker, W. E. Symmetry in Chemical Bonding & Structure C. E. Merrill Publishing Co.
USA (1974).
4. Bishop, D. M. Group Theory and Chemistry, Clarendon Press: Oxford, U.K. (1973).
nd
5. Shriver, D. F., Atkins, P. W. & Langford, C. H. Inorganic Chemistry, 2 Ed., Oxford Univ. Press (1998).
6. Purcell, K. F. & Kotz, J. C. Inorganic Chemistry, W. B. Saunders and Co.: N. Y. (1985).
7. Wulfsberg, G. Inorganic Chemistry Univ. Science books: Viva Books: New Delhi (2000)
8. Mabbs, F. E. & Machin, D. J. Magnetism and Transition Metal Complexes Chapman and Hall: U.K.
(1973).
9. Drago, R. S. Physical Methods in Chemistry W. B. Saunders Co.: U.K. (1982).
Practical Core Course 4 (50 Marks/ 2 Credits)

Inorganic Chemistry – 201
Course Objective: To impart advanced knowledge on the classification and further analysis of
mixture of metal ions qualitatively. Special emphasis will be given to metal ions in higher oxidation
states which are routinely employed as catalysts in day to day industrial processes.
1. Qualitative analysis of mixtures of salts including rare element salts (soluble and insoluble)
containing eight radicals including interfering ions.
2. Determination of some metal ions, such as iron, nickel, etc. by colorimetric method.
3. Any other experiments done in the class during the semester.
Course/Learning Outcomes: The complex solution chemistry and analysis of metal ions in higher
oxidation states will equip students to understand the catalytic mechanism and to design new catalysts.
__________________________________________________________________________________
26
Paper 202- Organic Chemistry-II (Core course 5)
Course Objective: To impart knowledge of spectroscopic techniques and applications of oxidizing

and reducing agents in organic synthesis.
Course A: Spectroscopy of Organic Compounds

13 19 31
PMR: Natural abundance of C, F and P nuclei; The spinning nucleus, effect of external
magnetic field, processional motion and frequency, Energy transitions, Chemical shift and its
measurements. Factors influencing chemical shift, anisotropic effect; Integrals of protons, spin-spin
coupling, splitting theory, magnitude of coupling constant; Simple, virtual and complex spin-spin
coupling; Chemical and magnetic equivalence, proton exchange, factors affecting the coupling - First
and non-first order spectra; Simplification of complex spectra (solvent effect, field effect, double
resonance and lanthanide shift reagents) and NOE experiments (NOESY, HOESY, ROESY, etc.).
Applications of PMR in structural elucidation of simple and complex compounds.
13 1
CMR: Resolution and multiplicity of C NMR, H-decoupling, noise decoupling, broad band
decoupling; Deuterium, fluorine and phosphorus coupling; NOE signal enhancement, off-resonance,
proton decoupling, Structural applications of CMR. DEPT and INEPT experiments; Introduction to
2D-NMR; COSY, HMQC and HETEROR spectra.
MASS: Theory, instrumentation and modifications; Unit mass and molecular ions; Important terms-
singly, doubly/multiple charged ions, metastable peak, base peak, isotopic mass peaks, relative
+
intensity, FTMS, etc.; Recognition of M ion peak; Ionization methods (EI, CI, FAB, ESI, APCI and
MALDI), General fragmentation rules: Fragmentation of various classes of organic molecules,
including compounds containing oxygen, sulphur, nitrogen and halogens; α-, β-, allylic and benzylic
cleavage; McLafferty rearrangement, ortho effect etc.
Structure elucidation of organic compounds using IR, NMR and Mass Spectra
Course B: Reagents and Methods in Organic Synthesis
Organosilicone Compounds: Preparation and applications in organic synthesis.

Applications of Pd(0) and Pd(II) complexes in organic synthesis: Stille, Suzuki and Sonogashira
coupling, Heck reaction and Negishi coupling.
Preparation and applications of lithium organocuparates.
Reductions: Stereochemistry, stereoselection and mechanism of catalytic hydrogenation and metal-
liquid ammonia reductions.
Hydride transfer reagents: Sodium borohydride, sodium cyanoborohydride, lithium aluminium
hydride and alkoxy substituted LAH reducing agents, DIBAL; Applications of hydroboration
(reductions, oxidations and cabonylations): diborane, diisoamylborane, thexylborane, 9-BBN,
isopinocamphenyl and diisopinocamphenyl borane.
Homogeneous hydrogenations: Mechanisms and applications using Rh, Ru and other metal
complexes.
Oxidations: Scope of the following oxidizing reagents with relevant applications and mechanisms:
DDQ, SeO2, Tl(NO3)3, Sharpless Asymmetric epoxidation, Asymmetric hydroxylation and
27
aminohydroxylation.
Course Outcome: The students will acquire knowledge of:

1. IR range for functional groups, λmax for polyenes and α, β-unsaturated carbonyl compounds.
2. Cotton effect curves for obtaining the absolute configuration of chiral molecules with
chromophores.
3. Solve structural problems based on UV-Vis, IR, 1HNMR, 13CNMR and mass spectral data.
4. They also gain knowledge on various palladium-catalyzed coupling reactions, reducing agents,
oxidizing agents, and their applications in organic synthesis.
Course/Learning Outcomes: Students will gain an understanding of the basic principles of NMR
spectroscopy such as chemical shift, coupling constant, and anisotropy and describe how they are
affected by molecular structure, and identify organic compounds by analysis and interpretation of
spectral data. They also gain knowledge on various palladium catalyzed coupling reactions, reducing
agents, oxidizing agents, and their applications in organic synthesis.
Recommended Texts:
1. Carruthers, W. Modern Methods of Organic Synthesis Cambridge University Press (1996).
3. Kemp, W. Organic Spectroscopy 3rd Ed., W. H. Freeman & Co. (1991).
4. Silverstein, R. M., Bassler, G. C. & Morrill, T. C. Spectroscopic Identification of Organic
Compounds John Wiley & Sons (1981).
5. Pavia, D. L.; Lampmann, G. M.; Kriz, G. S.; Vyvyan, J. R. Introduction to Spectroscopy Cengage
Learning (2014).
7. Organic Structures from spectra; L. D. Field, S. Sternhell and J R Kalman, John Wiley & Sons
Ltd., 2007
Practical Core Course 5 (50 Marks/ 2 credits)

Organic Chemistry-202
Course Objective: To acquire knowledge of laboratory techniques for organic synthesis and
characterization.
Organic Chemistry-202
A. Organic Synthesis
i) Protection and deprotection reactions of carboxylic acids, amines, alcohols, 1,2-
diols, aldehydes/ketones, etc.
ii) Oxidation reactions of alcohols, aldehydes, etc.
iii) Reduction reactions of aldehydes/ ketones, carboxylic acids, carbon-carbon
multiple bonds, nitro compounds
iv) Metals/ metal salts catalyzed coupling reactions
v) Diels-Alder reactions
vi) Bromination reactions involving allylic/ benzylic bromination and aromatic
substitution reactions
28
vii) Diazotisation reactions for substitutions and couplings
viii) Condensation reactions
ix) Esterification, transesterification and hydrolysis reactions
x) Preparation of phenoxyacetic acids and 2,4-D (2, 4-dichlorophenoxyacetic acid)
B. Application of IR spectra and introduction to NMR spectra of simple compounds

1. Safe laboratory practices by handling laboratory glassware, equipment, and chemical reagents.
2. Synthetic procedures: aqueous workup, distillation, reflux, separation, isolation, and
crystallization.
3. Starting materials, functional groups, mechanism, and typical reaction conditions.
4. Characterization by physical and spectroscopic techniques.
___________________________________________________________________________
29
Paper 203- Physical Chemistry-II (Core course 6)
Course Objective: To impart fundamental knowledge about the basic concepts of both classical and
quantum statistical mechanics. To understand the link between macroscopic thermodynamics and
microscopic quantum mechanics through different statistical methods. To highlight applications of
Boltzmann distribution in the fundamental concepts of electrochemistry, kinetics and
macromolecules.
Course A: Statistical Mechanic and Thermodynamics
Fundamentals: Idea of microstates and macrostates. Concept of distributions- Binomial & multi-
nomial distributions for non-degenerate and degenerate systems, Thermodynamic probability and
most probable distribution. Canonical and other ensembles. Statistical mechanics for systems of
independent particles and its importance in chemistry. Types of statistics: Boltzmann, Bose-Einstein
and Fermi-Dirac statistics. Thermodynamic probability (W) for the three types of statistics. Derivation
of distribution laws (most probable distribution) for the three types of statistics. Lagrange’s
undetermined multipliers. Stirling’s approximation, Molecular partition function and its importance.
Assembly partition function.
Applications to ideal gases: The molecular partition function and its factorization. Evaluation of
translational, rotational and vibrational partition functions for monatomic, diatomic and polyatomic
gases. The electronic and nuclear partition functions. Calculation of thermodynamic properties of
ideal gases in terms of partition function. Statistical definition of entropy. Ortho- and para-hydrogen,
statistical weights of ortho and para states, symmetry number. Calculation of equilibrium constants of
gaseous solutions in terms of partition function, perfect gas mixtures.
Einstein theory and Debye theory of heat capacities of monatomic solids.
Third law of thermodynamics, Residual entropy.
Course B: Macromolecules, Electrochemistry and Kinetics

Macromolecules: Concepts of number average and mass average molecular weights. Methods of
determining molecular weights (osmometry, viscometry, sedimentation equilibrium methods). Theta
state of polymers. Distribution of chain lengths. 1-D random walk model in detail, Average end-to-
end distance.
Electrochemistry: Solutions: Activity coefficients and ion-ion interactions. Physical significance of
activity coefficients, mean activity coefficient of an electrolyte and its determination. Derivation of
the Debye-Hückel theory of activity coefficients (both point ion size and finite ion size models).
Excess functions.
Theories of reaction rates: Collision theory. Potential energy surfaces (basic idea). Transition state
theory (both thermodynamic and statistical mechanics formulations). Theory of unimolecular
reactions, Lindemann mechanism, Hinshelwood treatment, RRKM model (qualitative treatment).
Solution kinetics: Factors affecting reaction rates in solution. Effect of solvent and ionic strength
(primary salt effect) on the rate constant. Secondary salt effects.
30
Course/Learning Outcomes: The student will learn the basic principles of statistical mechanics,
which correlates the microscopic properties of systems with the macroscopic observables. The
students will also learn the applications of the Boltzmann distribution and partition functions in
electrochemistry, theories of chemical kinetics and random walk models in macromolecules.
Recommended Texts:
1. McQuarrie, D. A. Statistical Mechanics, Viva Books Pvt. Ltd.: New Delhi (2003).
2. Bagchi B. Statistical Mechanics for Chemistry and Material Science, CRC Press (2018).
3. L. D. Landau and E. M. Lifshitz, Statistical Mechanics, Part I, Butterworth-Heinemann, 3rd ed. (2005).
4. J. M. Bockris and A. K. N. Reddy, Modern Electrochemistry 1 (Ionics), Springer (2006).
5. Laidler, K. J. Chemical Kinetics 3rd Ed., Benjamin Cummings (1997).
6. Billmeyer, F. W. Textbook of Polymer Science 3rd Ed. Wiley-Interscience: New York (1984).
8. McQuarrie, D. A. & Simon, J. D. Physical Chemistry: A Molecular Approach 3rd Ed., Univ. Science
Books (2001).
Practical Core Course 6 (50 Marks/ 2 Credits)
Physical Chemistry (50 marks) (Core practical 6)
CHEMICAL KINETICS
1. Determine the specific reaction rate of the potassium persulphate-iodide reaction by the Initial
Rate Method.
2. Study the kinetics of the iodination of acetone in the presence of acid by the Initial Rate Method.
CONDUCTOMETRY
1. Study the conductometric titration of a mixture of a strong and weak acid.
2. Titrate a moderately strong acid (salicylic/ mandelic acid) by the
(a) salt-line method
(b) double alkali method.
3. Titrate a mixture of copper sulphate, acetic acid and sulphuric acid with sodium hydroxide.
4. Titrate a tribasic acid (phosphoric acid) against NaOH and Ba(OH)2 conductometrically.
5. Titrate magnesium sulphate against BaCl2 and its reverse titration
6. Estimate the concentration of each component of a mixture of AgNO3 and HNO3 by
conductometric titration against NaOH.
7. Determine the degree of hydrolysis of aniline hydrochloride.
POTENTIOMETRY
1. Determine the solubility and solubility product of an insoluble salt, AgX (X=Cl, Br or I)
potentiometrically.
2. Determine the mean activity coefficient (γ±) of 0.01 M hydrochloric acid solution.
3. Titrate phosphoric acid potentiometrically against sodium hydroxide.
4. Find the composition of the zinc ferrocyanide complex by potentiometric titration.
5. Titrate potentiometrically solutions of
(a) KCl/ KBr/ KI;
(b) mixture of KCl + KBr + KI and determine the composition of each component in the
mixture.
6. Titrate Fe2+ with Ce4+ potentiometrically.
7. Determine zinc in the presence of calcium by potentiometric titration.
8. Verify the Debye-Hückel theory through the solubility of ionic salts.
(Note: Depending on availability of time, some experiments may be added/deleted during the semester.
31
M.Sc. Part II
SEMESTER – III
Paper 301- Inorganic Chemistry-III (Core course 7)
Marks : 100 Duration : 3hrs
Course Objective: To equip students to understand the various mechanisms operative in inorganic
complexes during substitution and in electron transfer reactions. Further, their utility towards realizing
newer compounds will be demonstrated. Role of these complexes in catalysis and many bioprocesses
will be taught.
Course A: Inorganic Reaction Mechanisms
Mechanisms of substitution reactions of tetrahedral, square planar, trigonal bipyramidal, square

pyramidal and octahedral complexes. Potential energy diagrams, transition states and intermediates,
isotope effects, Berry's pseudo rotation mechanism, factors affecting the reactivity of square planar
complexes, Swain-Scott equation, Trans effect and its application to synthesis of complexes.
Molecular rearrangement processes: Electron transfer reactions (outer and inner sphere), HOMO and
LUMO of oxidant and reluctant, chemical activation. Precursor complex formation and
rearrangement, nature of bridge ligands, fission of successor complexes, Two-electron transfers,
Synthesis of coordination compounds using electron transfer reactions, mixed valence complexes and
internal electron transfer.
Course B: Catalysis and Bio-inorganic Chemistry

Transition metal ion catalysts for organic transformations and their application in hydrogenation
(using symmetric and chiral organometallic catalysts), isomerization, olefin oxidation, carbonylation
and polymerization reactions. Role of metal ions in biological systems. Toxic metal ions and their
detoxification, chelation therapy/chelating agents in medicine. Recent advances in cancer
chemotherapy using chelates. Biological nitrogen fixation. Natural and synthetic oxygen carriers. Na-
K, ATPase or sodium pump. Futuristic aspects of organo transition metal complexes as catalysts and
in bio-inorganic chemistry.
Course/Learning Outcomes: Fundamental understanding for inorganic synthetic chemistry through

substitution reactions will be learnt. Further, basic concepts involved in the use of these compounds as
catalysts and the various essential elements present in human body along with their main functions
will be the outcome.
Recommended Texts:
1. Drago, Russell S. Physical Methods for Chemists 2ed. East West Press Pvt. Ltd. (2016).
2. Mabbs, F. E. & Machin, D. J. Magnetism and Transition Metal Complexes. Dover Publications; 2008 edition
(2008).
3. Roberts, A. P. Polyoxometalates: Properties, Structure and Synthesis, Nova Science Publishers, Incorporated
(2016).
4. Kettle. S. F. A. Physical Inorganic Chemistry: A Coordination Chemistry Approach, Springer, Berlin,
Heidelberg (1996).
5. Hughes, M. N. The Inorganic Chemistry of Biological Processes, 2nd Ed., Wiley (1981).
6. Masters, C. Homogeneous Transition Metal Catalysis Chapman & Hall (1981).
7. Purcell, K. F. & Kotz, J. C. Inorganic Chemistry, Cengage Learning India private ltd., New Delhi (2010)
8. Asperger, S. Chemical Kinetics and Inorganic Reaction Mechanisms, Springer-US, New York (2003)
32
Paper 302-Organic Chemistry-III (Core course 8)
Course objective: To provide knowledge of photochemistry & pericyclic reactions and medicinal
Chemistry.
Course A: Photochemistry & Pericyclic Reactions

Photophysical processes: Jablonskii diagram, energy pooling, exciplexes, excimers,
photosensitization, quantum yield, solvent effects, Stern-Volmer plot, delayed fluorescence, etc.
Photochemistry of alkenes: cis-trans isomerization, non-vertical energy transfer; photochemical
additions; reactions of 1,3-, 1,4- and 1,5-dienes; dimerizations.
Photochemistry of carbonyl compounds: Norrish type I & II reactions (cyclic and acyclic); α,β-
unsaturated ketones; β,γ-unsaturated ketones; cyclohexenones (conjugated); cyclohexadienones
(cross-conjugated & conjugated); Paterno–Buchi reactions; photoreductions.
Photochemistry of aromatic compounds: Isomerizations, skeletal isomerizations, Dewar and
prismanes in isomerization. Singlet oxygen reactions; Photo Fries rearrangement of ethers and
anilides; Barton reaction, Hoffman-Loefller-Freytag reaction.
Pericyclic reactions: Electrocyclic, cycloaddition, sigmatropic and chelotropic reactions; General
Orbital Symmetry rules, Frontier Orbital approach, PMO approach, Correlation diagrams for different
systems, Hückel–Mobius approach, General pericyclic selection rule and its applications, 1,3-dipolar
additions, Ene reaction.
Course B: Medicinal Chemistry

Introduction to the history of medicinal Chemistry.
General mechanism of drug action on lipids, carbohydrates, proteins and nucleic acids, Drug
metabolism and inactivation. Receptor structure and sites.
Drug discovery, development, design and delivery systems.
General introduction to antibiotics, Mechanism of action of lactam antibiotics, non-lactam antibiotics
and quinilones; antiviral and anti-AIDS drugs.
Neurotransmitters, classes of neurotransmitters, Drugs affecting collingeric and adrenergic
mechanisms.
Anti-histamines, anti-inflammatory, anti-analgesics, anticancer and anti-hypertensive drugs.

New developments, e.g. gene therapy, anti-sense & anti-gene strategies and drug resistance.
Course Outcomes: The students will acquire knowledge of:

1. Molecular orbital symmetry and possibility of thermally and photochemically pericyclic reactions.
2. Basics of photochemical reactions of alkenes, carbonyl, and aromatic compounds.
3. Application of natural products and synthetic molecule in medicinal chemistry.
Learning Outcomes: This course will uncover all the major topics in pericyclic reactions and organic
photochemistry. Another part of course will provide knowledge about molecule in medicinal
chemistry.
33
Recommended Texts:
2. Horspool, W. M. Aspects of Organic Photochemistry Academic Press (1976).
3. Lowry, T. H. & Richardson, K. S. Mechanism and Theory in Organic Chemistry Addison-Wesley
Educational Publishers, Inc. (1981).
5. Fleming, I., Pericyclic Reactions, Oxford Science Publications (1998).
6. Marchand, A. P. & Lehr, R. E. Pericyclic Reactions Academic Press (1977).
7. Gringauz, A. Introduction to Medicinal Chemistry: How Drugs Act and Why? John Wiley & Sons
(1997).
8. Patrick, G. L. Introduction to Medicinal Chemistry Oxford University Press (2001).
th
9. Lemke, T. L. & William , D. A., Foye’s Principles of Medicinal Chemistry, 5 Ed., USA, (2002)
___________________________________________________________________________
34
Paper 303- Physical Chemistry-III (Core course 9)
Course Objective: This course is aimed at providing students with qualitative and quantitative
knowledge about principles and applications of different spectroscopic techniques, i.e., atomic,
molecular, vibrational, Raman, NMR, NQR, Mossbauer and electronic, in the structure determination
of molecules. Students will also learn basic concepts of atomic scattering and diffraction methods.
Course A: Molecular structure and spectroscopy
Spectroscopic methods:Characterization of electromagnetic radiation. Born-Oppenheimer

approximation. Heisenberg’s Uncertainty Principle. Basic elements of spectroscopy. Time dependent
perturbation. Einstein coefficients. Lambert-Beer’s law. Integrated absorption coefficients. Transition
dipole moments and general selection rules based on symmetry ideas.
Atomic spectra: Characterization of atomic states. Microstate and spin factoring methods. Hund’s
rules. Derivation of spin and orbital selection rules (based on recursion relations of Legendre
polynomials). Spectra of complex atoms. Zeeman and Stark effects. Atomic photoelectron
spectroscopy.
Molecular spectroscopy: Rotational spectroscopy of diatomic molecules based on rigid rotator

approximation. Determination of bond lengths and / or atomic masses from microwave data. Effect of
isotopic substitution. Non-rigid rotator. Classification of polyatomic molecules. Energy levels and
spectra of symmetric top molecules and asymmetric top molecules. First and second order Stark
effect.
Vibrational spectroscopy: Normal coordinate analysis of homonuclear and heteronuclear diatomic

molecules. Extension to polyatomic linear molecules. Derivation of selection rules for diatomic
molecules based on Harmonic oscillator approximation. Force constants and amplitudes. Anharmonic
oscillator. Overtones. Dissociation energies from vibrational data. Vibration-rotation spectra, P, Q and
R branches. Breakdown of the Born-Oppenheimer approximation. Nuclear spin effect. Symmetry of
normal coordinates. Use of Group Theory in assignment of spectra and selection rules for simple
molecules. Overtones and combination bands.
Raman spectroscopy: Stokes and anti-Stokes lines. Polarizability ellipsoids. Rotational and vibrational
Raman spectroscopy. Selection rules. Rule of Mutual Exclusion. Polarization of Raman lines.
Course B: Diffraction, electronic spectroscopy, NMR & Mossbauer
Diffraction Methods. Atomic scattering factors. Scattering by a small crystal. Direct and reciprocal
lattice. Miller indices. Bragg’s law and Laue’s equations. Structure factors. Systematic absences for
different types of unit cells (primitive, face-centred, body-centred, side-centred) and application to
some common metal and metal salt structures (rock salt, zinc blende, etc.). Space groups. Glide planes
and screw axes. Structure determination for organic crystals like naphthalene. Fourier series,
Patterson’s functions. Heavy atom method. Comparison of X-ray method with electron and neutron
diffraction methods. Band structure of solids.
NMR spectroscopy: Larmor precession. Mechanisms of spin-spin and spin-lattice relaxations and
quantitative treatment of relaxation. Quantum mechanical treatment of the AB system. Selection rules
and relative intensities of lines.
35
NQR spectroscopy: Quadrupole nuclei, quadrupole moments, electric field gradient, coupling
constant, splitting. Applications.
Principles of Mössbauer spectroscopy: Isomer shifts. Quadrupole and Nuclear Zeeman splittings.
Applications in structure determination
Electronic spectroscopy: Diatomic molecules. Selection rules. Breakdown of selection rules. Franck-
Condon factors. Dissociation energies. Photoelectron spectroscopy of diatomic (N2) and simple
polyatomic molecules (H2O, formaldehyde). Adiabatic and vertical ionization energies. Koopmans’
theorem.
Polyatomic molecules. Oscillator strengths. Use of Free Electron Model, HMO theory and Group
theory for polyenes and carbonyl compounds (formaldehyde). Qualitative ideas of solvent effects-
viscosity, polarity, hydrogen bonding.
Excited states: Deactivation. Jablonskii diagram. Fluorescence and phosphorescence and factors
affecting these. Calculation of excited state life-times from absorption data. Quenching of
fluorescence, Stern-Volmer equation.
Learning Outcomes: The student will acquire qualitative and quantitative knowledge of the
fundamental concepts of various spectroscopic methods, group theoretical concepts and diffraction
techniques, and their applications to characterize different molecules and crystals. The learners should
be able to distinguish between various spectroscopic transitions and interpret data for molecular
characterization.
Recommended Texts:
1. Hollas. J. M., Modern Spectroscopy 4th Ed., John Wiley & Sons (2004).
2. Satyanarayana, D. N., Handbook of Molecular Spectroscopy: From radio waves to gamma rays, I.K.
International Publishing House, New Delhi (2015).
3. Kakkar, R., Atomic & Molecular Spectroscopy, Cambridge University Press (2015).
4. Brand, J. C. D. & Speakman, J. C. Molecular Structure: The Physical Approach 2nd Ed., Edward Arnold:
London (1975).
5. Chang, R. Basic Principles of Spectroscopy McGraw-Hill, New York, N.Y. (1970).
6. Moore, W. J. Physical Chemistry 4th Ed. Prentice-Hall (1972).
7. Warren, B. E. X-Ray Diffraction Dover Publications (1990).
8. Bacon, G. E. Fifty Years of Neutron Diffraction Hilger (1987).
36
Paper 3101-Inorganic Chemistry (Special-I/ Open Elective 1)
Course objective: Various aspects of industrially relevant silicates, boranes, aluminosilicates and
zeolites including their classification, structural understanding and their reactions will be elaborated.
Various solutions to multielectron systems will be imparted.
Course A: Chemistry of Inorganic Rings, Cages and Metal Cluster Compounds

Chemistry of inorganic rings, cages and metal cluster compounds, borazines, phosphazenes,
polyhedral boranes, carboranes, metalloboranes and metallocarboranes.
Silicates and aluminosilicates
Classifications, structure, properties and applications of naturally occurring silicates and
aluminosilicates.
Syntheses of pillared clays, and zeolites.
Characterization of clays, pillared clays and zeolites from measurement of surface area, surface
activity pore size, distribution and interlayer spacing.
Application of clays, pillared clays and zeolites with emphasis of catalyses.
Course B: Introduction to the Solution of Multielectron Problems

Introduction to the solution of multielectron problems, the central field approximation, angular
momenta, step up and step down operators and their use in atomic spectra. Lande’s interval rule.
Evaluation of energy matrices using Slater’s method. Wave functions forming basis for irreducible
representations, direct product. Spherical harmonics and their linear combinations. Operator
equivalent technique.
The octahedral potential, contribution of spherical harmonics to the octahedral potential Vxyz. Single
electron in a cubic field, quantitative basis (r,θ,φ) for the splitting of d orbitals to eg and t2g in terms
of Dq, multielectron systems - the weak and strong field cases. Generation of a secular determinant for
3 2
F term (d ) in weak field. Bethe’s method of descending symmetry. Non octahedral fields,
tetrahedral (including contribution of odd harmonics), trigonal and tetragonal (including Ds & Dt
parameters). Spin orbit coupling and its magnitude in comparison to crystal field. Splitting of eg and
1 9 ’ ’
t2g orbitals due to spin orbit coupling, for the d and d case. The use of double groups D4 and O .
Effect of spin orbit coupling on A, E and T terms in octahedral fields.
Course/Learning Outcomes: Industrially important solids along with their structure-property

correlation will benefit the learners. Another part provides theoretical understanding multielectron
systems.
Recommended Texts:
1. B.N. Figgis and M.A. Hitchman, Ligand Field Theory and its Applications, Wiley (2010).
2. Sels, B.F. & Kustov, L.M. Zeolites and Zeolite-like materials 1st Edition, Elsevier (2016).
3. Wells, A.F. Structural Inorganic Chemistry, 5th Edition, Oxford University Press, Oxford (1984).
4. Adams, D.M. Inorganic Solids. An Introduction to Concepts in Solid-State Structural Chemistry, John Wiley
& Sons, London (1974).
5. Liebau, F. Structural Chemistry of Silicates: Structure, Bonding, and Classification, Springer- Verlag Berlin
Heidelberg (1985).
___________________________________________________________________________
37
Paper 3102-Inorganic Chemistry (Special II/ Open Elective 1)
Course objective: To educate the dramatic changes in properties that occurs by reducing the size and
shape of materials. To impart knowledge on how to perform the synthesis of such small sizes and
shapes of materials.
Course A: Properties of Nanomaterials
Introduction: Properties of materials & nanomaterials, role of size and shape in nanomaterials.
Electronic Properties: Classification of materials: Metal, Semiconductor, Insulator, Band structures,
Brillouin zones, Mobility, Resistivity.
Magnetic Properties: Superparamagnetism, blocking. Important properties in relation to
nanomagnetism.
Optical Properties: Photoconductivity, Optical absorption & transmission, Photoluminescence,
Fluorescence, Phosphorescence, Electroluminescence.
Thermal Properties and Mechanical Properties;
Course B: Synthesis and Characterization of Nanomaterials

Chemical Methods: Metal nanocrystals by reduction, Solvothermal synthesis, Photochemical
synthesis, Electrochemical synthesis, Nanocrystals of semiconductors and other materials by arrested
precipitation, Thermolysis routes, Sonochemical routes, Post-synthetic size-selective processing. Sol-
gel, Micelles and microemulsions.
Biological Methods of Synthesis: Use of bacteria, fungi, Actinomycetes for nanoparticles synthesis,
Magnetotactic bacteria for natural synthesis of magnetic nanoparticles; Mechanism of formation;
Viruses as components for the formation of nanostructured materials; Synthesis process and
application, Role of plants in nanoparticle synthesis.
Characterization Techniques: X-ray diffraction, Scanning Probe Microscopy, SEM, TEM, Optical
microscope and their description, operational principle and application for analysis of nanomaterials,
UV-VIS-IR Spectrophotometers.
Learning Outcomes: Students will learn the basic changes in properties of materials when the size
and shape were changed together with their various ways of achieving them. Characterization of ultra-
small particles will be learnt.
Recommended Texts:
1. Dupas, C., Houdy, P. & Lahmani, M. Nanoscience: Nanotechnology and Nanophysics, Springer (2004)
2. Klabunde, K. J., Ed. Nanoscale Materials in Chemistry, Wiley Interscience (2001)
3. Kulkarni, S. K. Nanotechnology: Principles and Practices, Capitol Publishing Company (2007)
4. Wilson, M., Kannangara, K., Smith, G., Simmons, M. & Raguse, B. Nanotechnology: Basic Science and
Emerging Technologies, Overseas Press (2005).
5. Poole Jr., C. P. & Ovens, F. J. Introduction to Nanotechnology, Wiley Interscience (2003)
6. Edelstein, A.S. & Cammarata, R. C., Ed. Nanomaterials: Synthesis, Properties and Applications,
Institute of Physics Publishing (1996)
38
7. Rao, C.N.R., Müller & Cheetham, A.K., Eds. The Chemistry of Nanomaterials: Synthesis, Properties and
Applications, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim (2004)
8. Edelstein, A.S. & Cammarata, R.C., Ed. Nanomaterials: Synthesis, properties and Applications,
Institute of Physics Publishing (1996).
__________________________________________________________________________
39
Paper 3201- Organic Chemistry (Special-I/ Open Elective-1)
Course Objectives: To acquire knowledge of the chemistry of life processes and bioactive
compounds.
Course A: Chemistry of Life Processes and Bioactive Compounds
Introduction to metabolic processes: Catabolism and anabolism, ATP- currency of biological energy,
energy rich and energy poor phosphates, role of NADH, NADPH, FADH2, TPP, coenzyme A, lipoic
acid and biotin.
Carbohydrate metabolism: Glycolysis, fate of pyruvate under anaerobic conditions, citric acid cycle,
oxidative phosphorylation (electron transport system), gluconeogenesis, C4 pathway, pentose
phosphate pathway and photosynthesis.
Fatty acid metabolism: Even chain and odd chain (saturated and unsaturated) fatty acids, ketone
bodies, fatty acid anabolism, calorific values of food.
Protein metabolism and disorders: Degradation of amino acids (C3, C4, C5 family), urea cycle, uric
acid and ammonia formation.
Enzymes: Enzyme active sites, allosteric sites and mechanisms of their actions, e.g. chymotrypsin,
carboxypeptidase, lipases, etc.
Nucleic acids: Chemical and enzymatic hydrolysis, purine metabolism, structure and functions of
DNA, RNA (m-RNA, t-RNA, r-RNA), genetic code (origin, Wobble hypothesis and other important
features), genetic errors.
Course B: Bioactive Compounds

Vitamins: Classification, occurrence, chemistry of Vitamins A, C and E, structure elucidation and
synthesis, deficiency syndromes, etc.
Insect hormones: Introduction to BH, JH and MH, chemistry of JH, structure elucidation and
synthesis, structural analogs, biosynthesis; JH mimics– some structures; chemistry of Juvabione.
Precocenes: Chemistry of Precocene I and II.
Antifeedants: Different classes of antifeedants; role of azadirachtin in IPM.
Pyrethroids: Introduction; structure elucidation and synthesis of pyrethroids, namely pyrethrins,
cinerins and jasmoline; Synthetic pyrethroids: Structure–activity relationships; synthesis of various
synthetic pyrethroids.
Insect pheromones: Semiochemicals, pheromones, primers and releasers, different classes of
pheromones, synthesis of different pheromones; advantages of pheromones over conventional
pesticides.
Hormones: General study of hormones including classification, mechanism of action of water soluble
and fat soluble hormones, secondary messengers, negative feedback mechanism; Antifertility agents.
Course Outcomes: The students will acquire knowledge of:

1. Metabolic process in all living organism.
2. Various pathways like ATP, role of various enzymes, role of amino acids, and proteins.
3. DNA structure, transfer of genetic information from one generation to another generation.
4. Understanding the complexity of biological reactions in a living organism.
5. Role of vitamins, its biosynthesis, advantage and disadvantages in a living organism.
40
6. Bioactive molecules in maintaining a healthy life.
Course/Learning Outcomes: This course provides basic knowledge of metabolic process in all
living organism. The students will understand various pathways like ATP, role of various enzymes,
role of amino acids, and proteins. This course will also explain DNA structure, transfer of genetic
information from one generation to another generation, disorders etc. It is very useful for
understanding the complexity of biological reactions in living organism.
Course B: Bioactive Compounds:
Vitamins are essential part of human life. This course gives an idea of role of vitamins, its
biosynthesis, advantage and disadvantages in living organism. The course will also give information
of other bioactive molecules like hormones which are very crucial in maintaining healthy life.
Recommended Texts:
1. Stryer, L. Biochemistry 4th Ed., W. H. Freeman & Co. (1995).
2. Zubay, S. Biochemistry Addison-Wesley (1983).
3. Litwak, G. Vitamins and Hormones, Academic Press, (2005)
4. Dugas, H. & Penney, C. Bioorganic Chemistry: A Chemical Approach to Enzyme Action Springer-Verlag
(1989).
___________________________________________________________________________
41
Paper 3202- Organic Chemistry (Special-II/ Open Elective-1)
Course Objectives: To acquire knowledge of different techniques of polymerization, their molecular

weight determination and processing of polymers.
Course A: Polymer Chemistry and Processing
Introduction: Polymers and their classification.
Synthesis of Polymers: Chemistry of radical, anionic and cationic polymerization; Zieglar–Natta

catalysts; Polycondensation and ring opening polymerization.
Methods of polymerization: Bulk, solution, suspension and emulsion polymerizations.

Geometry of the polymers: Homopolymers; copolymers; branched-polymers; crosslinked polymers;
random, alternating, block and graft copolymers; star polymers and dendrimers; tacticity of polymers.
Characterization of polymers: Molecular weight determination of polymers; thermal properties of

polymers; Glass transition temperature; plasticizers.
Polymer Processing: Injection moulding, compression moulding, blow moulding, Extrusion

compounding, elastomer properties, vulcanization, reinforcement, fillers, plasticisers and other
additives.
Course B: Role of Catalysis in Chemical Synthesis
The art of catalysis, Thermodynamic data and catalyst designing, Metal catalyzed organic reactions,
characteristics of transition metals which make them suitable as catalysts; Homogeneous and
heterogeneous catalysts and their characterization.
Catalyst and molecular activation, Catalytic reaction and the 16 electron rule, Catalyts for fine
chemical synthesis, transition metal ion catalysts for organic transformations and their applications in
epoxidation of alkenes, isomerization of unsaturated molecules, Alkene Metathesis, Oligomerisation
and polymerization (Zeigler Natta polymerization), olefin oxidation (Wacker Process),
Hydroformylation (oxoreaction) , Fischer-Tropsch Reaction, The water- Gas Shift Reaction,
Monsanto Acetic Acid Process, Reppe Carbonylation, Hydrocyanation, activation of C-H bond, Green
Chemistry and Catalysis, Computer applications in catalysis research.

1. Physico-chemical properties and molecular architecture of biopolymers.
2. Folding, stability, and dynamics of protein.
3. Dynamics by using fast kinetic methods (Stopped flow and laser flash photolysis)
4. Catalyst, its use in various types of chemical reactions for synthesis of various products.
The course is applied in nature and very useful for students in understanding of polymer chemistry.
The students learn basic concept, various techniques involves polymer synthesis, its use in daily life.
Strong back ground in polymer technology will help to fetch job in industry. Second part of the course
provides basic knowledge of catalyst, its use in various types of chemical reactions for synthesis of
various products.
42
Recommended Texts:
rd
1. Billmeyer Jr., F. W. Textbook of Polymer Science 3 Ed. Wiley-Blackwell (1984)
th
2. Odian , G. Principles of Polymerization 4 Ed. Wiley (2004)
3. Hodge, P. & Sherrington, D.C. Polymer-supported Reactions in Organic Synthesis John Wiley & Sons
(1980)
4. Collman J.P. & Hegedus Louis S., Principles and Application of Organotransition Metal Chemistry,
University Science Books (1980).
5. Elschenbroich C. & Salzer A. Organometallics: A Concise Introduction VCH (1989).
6. Roberts, S.M. & Poignant, G., Eds. Catalysis for Fine Chemical Synthesis, Volume 1-5, John Wiley &
Sons (2002)
7. Sheldon, R.A., Isabel, A. & Hanefeld U., Green Chemistry and Catalysis, Wiley-VCH (2007).
_________________________________________________________________________________
43
Paper 3301- Physical Chemistry (Special-I/ Open Elective 1)
Course Objective: To impart basic and fundamental knowledge of irreversible thermodynamics,

transport phenomena, interfacial phenomena in micelles, electrochemistry and methods of fast
kinetics. This course will provide insight into physical quantities to measure deviation from the
classical equilibrium behavior.
Course A: Irreversible Thermodynamics, Transport Phenomena
Irreversible thermodynamics
Meaning and scope of irreversible thermodynamics, Thermodynamic criteria for non-equilibrium
states, Phenomenological laws- Linear laws, Gibbs equation, Onsager’s reciprocal relations, Entropy
production- specific examples of entropy production, Non-equilibrium stationary states, Prigogine’s
principle of maximum entropy production, Coupled phenomena. Some important applications.
Transport phenomena: Diffusion coefficients, Fick’s first and second laws, relation between flux and
viscosity, relation between diffusion coefficient and mean free path, relation between thermal
conductivity/viscosity and mean free path of a perfect gas, Einstein relation, Nernst-Einstein equation,
Stokes-Einstein equation, Einstein-Smoluchowski equation.
Course B: Interfacial Phenomenon and Fast reaction

Surface phenomena: Surface active agents, classification of surface active agents, micellization,
hydrophobic interaction, critical micelle concentration (CMC), Krafft temperature, Factors affecting
the CMC of surfactants, counterion binding to micelles, thermodynamics of micellization,
solubilization, microemulsions, reverse micelles, surface films (eletrokinetic phenomena), catalytic
activity at surfaces. Electrode/ electrolyte interface; electrical double layer, electrode kinetics, Nernst
equation. Application of PES, ESCA and Auger spectroscopy to the study of surfaces.
Fast reactions: Luminescence and energy transfer processes, study of kinetics by stopped-flow
technique, relaxation method, flash photolysis and magnetic resonance method. Kinetics of solid-state
reactions.
Course/Learning Outcomes: Learners will acquire fundamental knowledge about irreversible
thermodynamics, the basis for the understanding and formulation of equations for the linear dynamics
of macroscopic chemical, physical and biological systems. Learners will also acquire basic knowledge
about surface phenomena in micelles, electrochemistry, catalysis, spectroscopy and fast kinetics.
Recommended Texts:
1. Rastogi, R. P., Introduction to Non-equilibrium Physical Chemistry, Elsevier B.V. (2008)
2. Kalidas, C. & Sangaranarayanan, M.V. Non-Equilibrium Thermodynamics: Principles & Applications,
Macmillan India Ltd. (2002).
3. Katchalsky, A. & Curren, P. F. Non Equilibrium Thermodynamics in Biophysics Harvard University Press:
Cambridge (1965).
4. Laidler, K. J. Chemical Kinetics 3rd Ed., Benjamin Cummings (1997).
5. Thomas, J. M. & Thomas, M. J. Principles and Practice of Heterogeneous Catalysis John Wiley & Sons
(1996).
6. Chorkendorff, Ib. & Niemantsverdriet, J. W. Concepts of Modern Catalysis and Kinetics Wiley-VCH (2003).
8. McQuarrie, D. A. & Simon, J. D. Physical Chemistry: A Molecular Approach 3rd Ed., Univ. Science Books
(2001).
44
9. Shaw, D. J. Introduction to Colloid and Surface Chemistry 2nd Ed. Butterworths (1970).
10. Adamson, A. W. & Gast, A. P. Physical Chemistry of Surfaces 6th Ed. Wiley Interscience.(1997)
___________________________________________________________________________
45
SEMESTER - III
PRACTICALS SYLLABUS
Paper 3103: Practical Inorganic Chemistry - I (Elective practical 1)

Course objective: Hands on experience on making various inorganic compounds by employing a

variety of synthetic strategies and their characterization will be aimed.
Part – A: Synthesis and Analysis

I. Synthesis of inorganic complexes/compounds and their characterization by various physicochemical
methods, viz. IR, UV, Visible, NMR spectroscopy, magnetic susceptibility etc. Selection can be made
from the following or any other from the existing literature.
(i) Metal acetylacetonates
(ii) Cis and trans isomers of [Co(en)2Cl2]Cl
(iii) Ion-exchange separation of oxidation states of vanadium.
(iv) Preparation of Ferrocene.
(v) Preparation of triphenyl phosphene Ph3P, and its transition metal complexes.
(vi) Determination of Cr(III) complexes.
[Cr(H2O)6]NO3.3H2O; [Cr(H2O)4Cl2]Cl.2H2O; [Cr(en)3]Cl3; Cr(acac)3.
(vii) Tin(IV) iodide, Tin(IV) chloride, Tin(II) iodide.
(viii) (N,N)-bis(salicyldehyde)ethylenediamine Salen H2; and its cobalt complex
[Co(Salen)].
(ix) Reaction of Cr(III) with multidentate ligands, a kinetics experiment.
(x) Vanadyl acetylacetonate.
(xi) Mixed valence dinuclear complex of Mangenese(III,IV).
(x) Other new novel synthesis reported in literature from time to time
(xi) Any other experiments done in the class during the current academic semester.
Part – B: Instrumental based Analysis: Any three/four techniques covered in the semester out of the
following syllabus:
(1) Instrumental methods of analysis utilizing flame photometer, atomic absorption
spectrophotometer, pH-meter, potentiometer, turbidimeter, electrochemical methods, separation
of mixtures of metal ions by ion exchange chromatography.
(2) Synthesis and thermal analysis of group II metal oxalate hydrates.
(3) Any other experiments done in the class during the current academic semester.
Course/Learning Outcomes: Students will learn to synthesize inorganic compounds, purify and
characterize them.
________________________________________________________________________________
46
Paper 3203: Practical Organic Chemistry - I (Elective practical 1)
Course Objective: To develop experimental skills of various separation, purification techniques and
structural elucidation of natural products.
Part A
1. Semi-micro qualitative analysis of single/polyfunctional compounds including derivatization
2. Application of spectral data (IR, UV, NMR and mass) for structural elucidation
3. Isolation of natural products:
i) Isolation of caffeine from tea leaves
ii) Isolation of piperene from black pepper
iii) Isolation of β-carotene from carrots
iv) Isolation of lycopene from tomatoes
v) Isolation of limonene from lemon peel
vi) Isolation of Euginol from cloves
vii) Isolation of Cystine from human hair
viii) Isolation of DNA from Onion/ Strawberries
Part B
4. Quantitative analysis:
i) Estimation of glucose by chemical methods
ii) Estimation of amino acids by chemical methods
iii) Estimation of nitro group in organic compounds
iv) Estimation of iodine number by Vij’s solution
v) Estimation of protein, caffeine and glucose by UV/VIS spectra (quantitative
analysis also)
vi) Estimation of ascorbic acid by chemical/UV methods
vii) And other possible estimations
5. Advanced organic synthesis:

Multistage synthesis including photochemical methods; representative examples:
i) Benzophenone → benzopinacol → benzopinacolone
ii) Benzoin → benzil → benzilic acid
iii) Benzaldehyde → chalcone → chalcone epoxide
iv) Chalcone → chalcone dibromide → a-bromochalcone
v) Cyclohexanone → cyclohexanone oxime → caprolactone
vi) And other suitable multi-step synthesis

1. Isolation and identification of natural products
2. Estimation of bio-molecules by chemical methods
3. Multistage organic synthesis
___________________________________________________________________________
47
Paper 3303: Practical Physical Chemistry – I (Elective practical 1)
Set A
SPECTROPHOTOMETRY
1. Study the visible region absorbance spectra of KMnO4 and K2Cr2O7.
2. Study the influence of pH on the spectrum of potassium dichromate solution.
3. Determine the concentrations of KMnO4 and K2Cr2O7 in a mixture by the MLRA method.
4. Study the effect of structure on the UV spectra of organic compounds.
5. Determine the solvent cut-off wavelengths for the given solvents.
6. Study the effect of solvent on the UV spectra of organic compounds (propanone).
7. Study the spectra of mesityl oxide/ benzophenone in different solvents and classify the
observed transitions in terms of n→π* and π→π* transitions. Discuss the shift in transitions
relative to those in acetone.
8. Determine the dissociation constant of phenolphthalein spectrophotometrically.
Set B
COLOURIMETRY
1. Verify Lambert-Beer’s law, and determine the concentration of CuSO4/KMnO4/K2Cr2O7 in a
solution of unknown concentration colourimetrically.
2. Determine the concentrations of KMnO4 and K2Cr2O7 in a mixture.
3. Study the kinetics of iodination of propanone colourimetrically in acidic medium.
4. Find the order and the energy of activation of the decomposition of the violet coloured Ce(IV)
oxidation product of N-phenylanthranilic acid using a colourimeter (J. Chem. Ed., 327
(1976)).
5. Determine the amount of iron present in a sample using 1,10-phenathroline.
6. Determine the dissociation constant of an indicator (phenolphthalein) colourimetrically.
7. Study the kinetics of the reaction of phenolphthalein with sodium hydroxide.
8. Study the kinetics of the reaction of crystal violet with sodium hydroxide.
Set C
COMPUTATIONAL TECHNIQUES
I. Use of spreadsheets and mathematical packages in data analysis and solving problems in
chemistry (e.g. potentiometric titrations, kinetics, regression, and solving simultaneous
equations).
II. Elements of the BASIC language, including strings and graphics.
Set D
CONDUCTOMETRY
1. Determine the critical micelle concentration of a surfactant (sodium lauryl sulphate) by the
conductivity method.
2. Study the effect of dielectric constant (ε) on the nature of the conductometric titration between
maleic acid and sodium methoxide using different combinations of methanol and hexane as
solvents.
3. Determine the velocity constant for the saponification of ethyl acetate conductometrically.
48
VISCOMETRY
4. Determine the molecular weight of a given macromolecule (PVP) by the viscosity method.
5. Determine the viscosity-average molecular weight of poly(vinyl alcohol) (PVOH) and the fraction
of “head-to-head” monomer linkages in the polymer.
NEPHELOMETRY
6. Estimate the concentration of sulphate ions in solution and in a sample of tap water by precipitation
with barium chloride.
7. Estimate chloride ions in a given solution/ water from various sources.
ULTRASONIC STUDIES
8. Find the ultrasonic sound velocity (u) and isentropic compressibility (Ks) for the following pure
solvents as a function of temperature: Water, DMF, DMSO, Methanol, Ethanol, 1-propanol
9. Measure the ultrasonic sound velocities as a function of temperature over the whole composition
range for the following binary mixtures: DMF/Water, DMSO/Water, DMF/ Methanol,
DMF/Ethanol, DMF/1-propanol, DMSO/Methanol, DMSO/Ethanol, DMSO/1-propanol,
Methanol/Water, Ethanol/Water, 1-propanol/Water.
SET E
NANOSCIENCE
1. Synthesize metallic (gold, silver, etc.) nanoparticles by reducing the corresponding salts with tea
extract and characterize using UV-Vis spectroscopy. Estimate the size of these nanoparticles using
the quantum mechanical equation for the particle in a 3D cubic box. Use the statistical mechanics
method to determine the average occupancy level at room temperature.
2. Synthesize silver nanoparticles using a green approach and show its caqtalytic activity in reduction
of methyl orange and rhodamine. Also study the kinetics of this process.
3. Estimate the optical energy gap of CdS nanoparticles doped with MnS in microemulsion media.
4. Study the effect of water/oil ratio in AOT isooctane based microemulsion on the particle size and
nandgap of CdS nanoparticles.
SET F
CHRONOAMPEROMETRY, CYCLIC VOLTAMMETRY, EIS DATA ANALYSIS

1. (a) Verify the Cottrell equation using potential step chronamperometry.
(b) The surface area of an electrode is determined via a chronoamperometric measurement.
3-
(c) Determine the diffusion coefficient of the ion [Fe(CN)6]
2. Record the effect of supporting electrolyte concentration on the Cottrell response.
3. Record the effect of solution viscosity on the Cottrell response and determine true area of a Pt
electrode.
4. Verify the Randles-Sevcik equation for cyclic voltammetry. Use a reversible system (10 mM
mixture of K3[Fe(CN)6] and K4[Fe(CN)6] in 2 M KCl). Identify the peak current and peak
2+ 3+
potential at different scan rates. Verify the reversibility of Fe /Fe system by using ratio cathodic
and anodic of peak currents.
5. Find quantities such as
0
i) Formal potential (E ), (ii) Number of electrons transferred, (iii) Diffusion coefficient (D), (iv) Area
(A) and concentration (C) by using CV.
49
6. Determine the best fit model and extract electrochemical system parameters from the given
impedance data using equivalent circuit models, viz. resistor, capacitor, Randles, Warburg, CPE,
CPE with diffusion, etc.
(Note: Depending on availability of time, some experiments may be added/deleted during the semester or
interchanged with experiments from IV semester.)
__________________________________________________________________________
50
SEMESTER IV
Inorganic Chemistry Special Papers
Paper 4101- Inorganic Chemistry (Special-III) (Elective paper 1)
Course objective: Fundamental understanding on the principle of operation and interpretation of

spectra of inorganic compounds for their structural characterization.
Spectral Techniques in Inorganic Chemistry
Course-A: Vibrational Spectroscopy, Mössbauer Spectroscopy, Magnetism & Mass Spectrometry
Vibrational spectroscopy: Vibrational motion and energies, number of vibrational modes,

anharmonicity, absorption in infrared, FT spectrometers, cell systems, effects of phase on spectra,
vibrational spectra and symmetry, selection rules, symmetry of an entire set of normal vibrations, F
and G matrix. Raman spectra and selection rules, polarized and depolarized Raman lines, resonance
Raman spectroscopy, use of symmetry to determine the number of active infrared and Raman lines,
rotational fine structure in gas phase IR. Non-resonance overtones and difference bands. Application
of Raman and Infrared selection rules to the determination of inorganic structures, bond strength
frequency shift relations, changes in spectra of donor molecules on coordination, change in symmetry
on coordination.
Mossbauer spectroscopy: Doppler shift and recoil energy, isomer shift and its interpretation,
quadrupole interactions, effect of magnetic field on Mossbauer spectra, applications to metal
complexes, metal carbonyls, Fe-S cluster and tin compounds, etc. Partial quadrupole splitting and
geometry of the complexes.
Magnetism: Types of magnetic behaviour, magnetic susceptibilities, Pascal's constants,
paramagnetism in experimental simple systems where S = ½, van Vleck's equation, its derivation and
its applications. Spin-orbit coupling and susceptibility of transition metal ions and rare earths;
magnetic moments of metal complexes with crystal field terms of A, E and T symmetry, T.I.P.,
intramolecular effects, antiferromagnetism and ferromagnetism of metal complexes, super
paramagnetism. High and low spin equilibria.
Mass spectrometry: Experimental arrangements and presentation of spectra, molecular ions,
appearance and ionization potential, fragmentation, ion reactions and their interpretation, effect of
isotopes on the appearance of a mass spectrum, molecular weight determination, thermodynamic data.
Application of mass spectrometry to inorganic compounds.
Course-B: Electronic Spectroscopy, NMR, EPR and NQR Spectroscopy

Electronic spectroscopy: Vibrational and electronic energy levels in a diatomic molecule, potential
energy level diagram. Symmetry requirements for n to π* transitions, oscillator strengths, transition
moment integrals (electric dipole and magnetic dipole moment operator), selection rules, spin orbit
and vibronic coupling contributions, mixing of d and p orbitals in certain symmetries. Polarized
absorption spectra. Survey of the electronic spectra of tetragonal complexes. Calculation of Dq and β
for Ni(II) Oh complexes, nephelauxetic effect, effect of σ and π bonding on the energy of t 2g orbitals
and Dq, spectrochemical series, effect of distortion on the d orbital energy level (Td, D2d, D4h), cis
and trans isomers and bonding parameters from spectra of tetragonal complexes, bonding parameters,
51
calculation of Dq, Ds and Dt for tetragonal complexes, intervalence electronic transition, structural
evidence from electronic spectra.
Nuclear magnetic resonance spectroscopy: Nuclear spin quantum number, Ι, and its calculation using
the nuclear shell model, spin parity rules. Types of nuclei based on value of Ι, nuclear spin angular
momentum quantum number, and its relation to classical magnetic moment. Behaviour of a bar
magnet in a magnetic field. The NMR transition and NMR experiment, measuring chemical shifts,
signal intensities and splitting. Application of chemical shifts, signal intensities and spin-spin coupling
1 11 15 19
to structure determination of inorganic compounds carrying NMR active nuclei like H, B, N, F,
29 31 183 195
Bi, P, W, Pt, etc. Effect of fast chemical reactions, coupling to quadrupolar nuclei, NMR of
paramagnetic substances in solution, nuclear and electron relaxation time, the expectation value of
<Sz>, contact shift, pseudo contact shift, factoring contact and pseudo contact shift for transition metal
ions. Contact shift and spin density, π delocalization, simplified M.O. diagram for Co(II) and Ni(II).
Application to planar tetrahedral equilibrium, Contrast agents.
Electronic paramagnetic resonance spectroscopy: Electronic Zeeman effect, Zeeman Hamiltonian

and EPR transition energy. EPR spectrometers, presentation of spectra. The effects of electron
Zeeman, nuclear Zeeman and electron nuclear hyperfine terms in the Hamiltonian on the energy of the
hydrogen atom. Shift operators and the second order effect. Hyperfine splittings in isotropic systems,
spin polarization mechanism and McConnell’s relations Anisotropy in g-value, EPR of triplet states,
zero field splitting, Kramer's rule, survey of EPR spectra of first row transition metal ion complexes.
Nuclear Quadrupolar Resonance (NQR) Spectroscopy: Quadrupolar moment, energy lends of a
quadrupolar nuclease and effect of asymmetry parameters and energy lends. Effect of an external
magnetic field, selected examples for elucidation of structural aspects of inorganic compounds using
NQR spectroscopy.
Course/Learning Outcomes: Applications of various spectroscopic techniques will be learnt by

the students to handle molecular structures during their higher studies or industrial applications.
Recommended Texts:
1. Kettle. S. F. A. Physical Inorganic Chemistry: A Coordination Chemistry Approach, Springer, Berlin,
Heidelberg (1996).
2. Drago, Russell S. Physical Methods for Chemists 2ed. East West Press Pvt. Ltd. (2016).
3. Mabbs, F. E. & Machin, D. J. Magnetism and Transition Metal Complexes. Dover Publications; 2008 edition
(2008).
4. Roberts, A. P. Polyoxometalates: Properties, Structure and Synthesis, Nova Science Publishers, Incorporated
(2016).
___________________________________________________________________________
52
Paper 4102- Inorganic Chemistry (Special-IV) (Elective Paper 2)
Course objective: Fundamental understanding on the organometallic compounds, their bonding

along with their practical utility in industries, Application of inorganic compounds for various
diseases.
Course A: Organotransition metal chemistry
General introduction, Structure and bonding, Survey of organometallic complexes according to
ligands. π bonded organometallic compounds including carbonyls, nitrosyls, tertiary phosphines,
hydrides, alkene, alkyne, cyclobutadiene, cyclopentadiene, arene compounds and their M.O.
diagrams. Metal-carbon multiple bonds. Fluxional organometallic compounds including π-allyl
complexes and their characterization. Metallocycles, unsaturated nitrogen ligands including dinitrogen
complexes.
Futuristic aspects of organotransition metal chemistry.
Course B: Bio-inorganic chemistry

Fundamentals of inorganic biochemistry, geo-chemical effects on life systems, essential and non-
essential elements in bio-systems.
Role of alkali/alkaline earth metals in bio-systems. Role of 3d block elements and nonmetals in bio-
systems. Role of metal ions in oxygen carriers and synthetic oxygen carriers. Designing of chelating
agents and metal chelates as medicines. Fixation of dinitrogen biologically and abiologically,
biotransformation of nonmetallic inorganic compounds. Environmental bioinorganic chemistry. Metal
ions as probes for locating active sites. Anti-oxidants. Metal ions as antioxidants, metal ion enhancing
catalytic activity of enzymes (Biocatalysts). Inhibitions as competitive and non-competitive, metals
and metalloproteins.
Metal complexes of polynucleotides, nucleosides and nucleic acids (DNA & RNA). Template
temperature, stability of DNA.
Role of metal ions in replication and transcription process of nucleic acids.

Biochemistry of dioxygen, bioinorganic chips and biosensors.
Biochemistry of calcium as hormonal messenger, muscle contraction blood clotting, neurotransmitter,
calcification reclaiming of barren land.
Metals in the regulation of biochemical events. Transport and storage of metal ions in vivo. Metal
complexes as probes of structure and reactivity with metal substitution.
Fundamentals of Toxicity and Detoxification. Nuclear medicines.
Course/Learning Outcomes: Fundamental understanding of organometallic compounds and their
practical use in petroleum refining process. Application of inorganic based compounds as drugs for
the treatment of various diseases.
Recommended Texts:
1. Green, M. L. H. Organometallic Compounds Chapman & Hall: U.K. (1968).
2. Coates, G. E., Green, M. L. H. & Powell, P. Principles of Organometallic Chemistry Chapman and Hall:
U.K. (1988).
3. Lippard, S. J. & Berg, J. M. Principles of Bioinorganic Chemistry Univ. Science Books (1994).
4. Lippard, S. J. Progress in Inorganic Chemistry Vols. 18 and 38, Wiley-Interscience (1991).
53
_________________________________________________________________________
54
Paper 4103- Inorganic Chemistry (Special-V) (Elective Paper 3)
Course objective: Fundamental understanding on the principle of operation, sources of error and
correct interpretation of results using appropriate analytical techniques will be aimed.
Course A: Analytical techniques (Instrumentation and Applications)
(i) Electroanalytical methods:- Polarography (DC, AC and pulse), cyclic voltammetry, coulometry
and anode stripping voltammetry.
(ii) Optical methods:- UV/Visible, X-ray photoelectron spectroscopy (XPS), Auger Electron
Spectroscopy (AES), ESCA, Atomic absorption and emission spectroscopy.
(iii) Infrared Spectroscopy, Dispersive and Fourier Transformed Raman, Resonance Raman and
Surface Enhanced Raman Spectroscopy- Dispersive and Fourier Transformed.
(iv) Hifanated Techniques: GC-IR, TG-IR Spectroscopy, GC-Mass Spectroscopy
(v) Imaging Techniques: Electron microscopy (SEM, TEM)
Course B: Diffraction, Separation and Thermal Methods

(i) Diffraction Methods: Single crystal and Powder X–Ray Diffraction and their applications for
Inorganic Compounds, Neutron Diffraction and Electron Diffraction.
(ii) Separation Methods: Theory and applications of separation methods in analytical chemistry:
solvent extraction, ion exchangers including liquid ion exchangers and chromatographic methods
for identification and estimation of multicomponent systems (such as TLC, GC, HPLC, etc.).
(iii) Thermal Methods: TG, DTA, DSC and thermometric titrations.
Course/Learning Outcomes: Advanced analytical techniques along with the instrumentation part
will enable students to perform optimal use of these techniques efficiently to their advantage and will
be useful for getting in chemical industries.
Recommended Texts:
1. West, A.R. Solid State Chemistry & its Applications, John Wiley & Sons (1987).
2. West, A.R. Basic Solid State Chemistry, 2nd Edition, John Wiley & Sons (2000).
3. Smart, L.E. & Moore, E.A. Solid State Chemistry - An Introduction, 3rd Edition, CRC Press (2005).
4. Rodgers, G.E. Descriptive Inorganic, Coordination & Solid-State Chemistry, 3rd Edition, Brooks/Cole,
Cengage learning (2002).
5. Tilley, R.J.D. Understanding Solids: The science of materials. , 2nd Edition, John Wiley & Sons (2004).
6. Christian, G. D., Analytical Chemistry, 6th Ed., John Wiley & Sons, Inc. (2004).
7. Skoog, D. A., West, D. M., Holler, R. J & Nieman, T. A. Principles of Instrumental Analysis Saunders
Golden Sunburst Series (1997).
8. Willard, H. H., Merritt, L. L., Dean, J. A. & Settle, F. A. (Eds.) Instrumental Methods of Analysis - 7th Ed.,
Wadsworth Publishing (1988) ISBN 0534081428
rd
9. Cullity, B.D. & Stock, S.R. Powder X-Ray Diffraction, 3 edition, Kindle Publisher 2001.
10. Stout, G.H. & Jensen, L. H. X- Ray structure Determination A Practical Guide IIed (John Wiley &
Sons), 1989.
__________________________________________________________________________
55
Paper 4104- Inorganic Chemistry (Special-VI/ Elective 4)
Course objective: Structure, bonding existing in the solid state, band theory, properties of
semiconductors luminescent and nuclear inorganic materials will be aimed.
Course A: Inorganic Materials
Introduction to the solid state, metallic bond, Band theory (Zone model, Brillouin Zones, Limitations
of the Zone model); Defects in solids, p-type and n-type; Inorganic semiconductors (use in transistors,
IC, etc.); Electrical, optical, magnetic and thermal properties of inorganic materials. Superconductors,
with special emphasis on the synthesis and structure of high temperature superconductors.
Solid State Lasers (Ruby, YAG and tunable lasers): Inorganic phosphor materials; Synthesis and
advantages of optical fibres over conducting fibres. Diffusion in solids, catalysis and Zone refining of
metals.
Preparation of nanomaterials and their characteristic differences over bulk materials. Principles of
Electron Microscopy, Dynamic Light Scattering, Atomic Force Microscopy and characterization of
nanomaterials.
Course B: Nuclear and Radiochemistry

Nuclear structure and nuclear stability, Nuclear models, Radioactivity and nuclear reactions (including
nuclear fission and fusion reactions).
Hot atom chemistry, Nuclear fission and fusion reactors.
The interaction of nuclear radiations with matter. Radiation hazards and therapeutics. Detectors and
their principles.
The direction of radioactivity. The counting errors and their corrections.
Tracer techniques and their applications. Isotope dilution and radio-activation methods of analysis.
Fission product analysis (e.g., the technique of isolating two or three different fission products of U or
Th and determining the yields).
Course/Learning Outcomes: Students will gain an introduction to inorganic materials combined

with the basic structural aspects. Idea about structure-property relationships will be gained. Various
aspects of materials including nuclear materials, nanomaterials, their fabrication and applications will
be learnt.
Recommended Texts:
1. West, A.R. Solid State Chemistry & its Applications, John Wiley & Sons (1987).
2. West, A.R. Basic Solid State Chemistry, 2nd Edition, John Wiley & Sons (2000).
3. Smart, L.E. & Moore, E.A. Solid State Chemistry - An Introduction, 3rd Edition, CRC Press (2005).
4. Rodgers, G.E. Descriptive Inorganic, Coordination & Solid-State Chemistry, 3rd Edition, Brooks/Cole,
Cengage learning (2002).
5. Tilley, R.J.D. Understanding Solids: The science of materials, 2nd Edition, John Wiley & Sons (2004).
6. Harvey, B. C. Introduction to Nuclear Chemistry Prentice-Hall (1969).
7. Friedlander, G. Kennedy, J. W., Marcus, E. S. & Miller, J. M. Nuclear & Radiochemistry, John Wiley & Sons
(1981).
8. Timp, G., Ed. Nanotechnology Springer-Verlag: N. Y. (1999).
___________________________________________________________________________
56
Paper 4105- Inorganic Chemistry (Special-VII/ Elective 4)
Course Objective: To teach Green Chemistry and approach towards sustainable development
Course A: Introduction to Green Chemistry
Green Chemistry: An interdisciplinary approach towards sustainable development
History of emergence of Green Chemistry through some industrial disasters, environmental

movements for public awareness and some important environmental laws, Definition of Green
Chemistry, Need for Green Chemistry, goals of Green Chemistry, Green Chemistry advances towards
a sustainable future, Green Chemistry v/s Environmental Chemistry, Green Chemistry and its
interdisciplinary nature, Twelve Principles of Green Chemistry and their illustrations with examples.
Catalysis for Green Chemistry with examples. Catalytic oxidation using H2O2, Bio-catalysis, Photo-
catalysis, Green reagents, Green solvents including solvent free synthesis of some organic compounds
and inorganic complexes, alternative sources of energy, Green energy and sustainability.
Course B: Application of Green Chemistry in real world cases

Wealth from waste, Industrial case studies
Green Nanotechnology, Greener approaches for nanoparticle synthesis
Pharmaceutical industries: The largest waste producer problems and solutions through Green
Chemistry benefits of greening industries, Need for Academia-Industry collaborations,
Innovations stemming from Academia-Industry collaborations
Emerging Green Technologies. Green solvents, Next generation catalyst design, Microwave assisted
synthesis etc.
Course/Learning Outcomes: This part of course provides introduction to green chemistry aspects
and the approaches to be adopted for greener synthesis. Students will understand the significance of
green chemistry in industries specially to provide cleaner energy.
Suggested Texts:
1. Anastas, P.T. & Warner, J.C. Green Chemistry- Theory and Practical, Oxford University Press (1998).
2. Matlack, A.S. Introduction to Green Chemistry, Marcel Dekker (2001).
3. Cann, M.C. & Connely, M.E. Real-World cases in Green Chemistry, American Chemical Society,
Washington (2000).
4. Sharma, R.K. & Bandichhor, R. Hazardous Reagent Substitution, Royal Society of Chemistry, Green
Chemistry Series (2018).
5. Ryan, M.A. & Tinnes, M. Introduction to Green Chemistry, American Chemical Society, Washington
(2002).
6. Sharma, R.K., Sidhwani, I.T. & Chaudhari, M.K. Green Chemistry Experiments: A Monograph I.K.
International Publishing House Pvt. Ltd. New Delhi, Bangalore ISBN 978-93-81141-55-7 (2013).
7. Lancaster, M. Green Chemistry: An Introductory Text RSC publishing, 2nd Edition ISBN 978-1-84755-
873-2 (2010).
___________________________________________________________________________
57
PRACTICALS
Paper 4106- Practical Inorganic Chemistry – II (Elective practical 2)
Course Objective: to teach analysis of complex material by various chemical methods.

To teach instrumental based analysis.
Part – A: Analysis
Analysis of the following complex materials by various chemical methods:
(i) Ores
(ii) Alloys
(iii) Inorganic substances
(iv) Any other experiments done in the class during the current academic semester.
Part – B: Instrumental based Analysis:

rd
Any three/four techniques not covered in the 3 semester out of the following syllabus:
(1) Instrumental methods of analysis utilizing flame photometer, atomic absorption spectrophotometer,
pH-meter, potentiometer, turbidity meter, electrochemical methods, separation of mixtures of
metal ions by ion exchange chromatography.
(2) Synthesis and thermal analysis of group II metal oxalate hydrates.
(3) Any other experiments done in the class during the current academic semester.
Paper 4107- Review Project
Marks : 100 Duration : 2 days x 6 h
The Review project will be based on writing a review based on the literature available on assigned
topic followed by power point presentation.
58
Organic Chemistry Special Papers
Paper 4201- Organic Chemistry (Elective course I)

Course Objective: To teach the concepts and critical bond forming reactions in advanced organic
synthesis, asymmetric synthesis, supramolecular chemistry, carbocyclic rings and molecular
rearrangements.
Course A: Advanced Organic Synthesis
Philosophy of organic synthesis: Disconnection approach, one group and two group disconnections,
reversal of polarity, chemoselectivity, one group C-C disconnection, two group C-C disconnections,
1,3-difunctional and 1,5-difunctional compounds. Tandem reactions, Domino reactions and multi-
component reactions.
Asymmetric synthesis: Development of methodologies for asymmetric synthesis, regioselectivity,
stereoselectivity, diastereoselectivity and stereospecificity.
Total synthesis of the following compounds using disconnection approaches: Gingerol, (z)-jasmone,
prostaglandins E2, F2α, menthol, taxol and gandriol.
Course B: Supramolecular Chemistry and Carbocyclic Rings

Principles of molecular associations and organizations: Non-covalent synthesis, Self assembly and
self organization, Supramolecular reactivity and catalysis, Molecular devices, Ion channels, Novel
liquid crystals, Gelators fibres and adhesives, Dendrimers, organic solids, organic conductors and
organic superconductors, catenanes and rotaxanes.
Chemistry of small, medium and large ring compounds.
Chemistry of non-benzenoid aromatics: Tropones. tropolones, azulenes, metallocenes and
annulenes. Bridged rings, caged molecules and adamantane.
Course/Learning Outcomes: The students will acquire knowledge of

1. Mechanistic pathway of organic reactions.
2. Retrosynthetic approach to planning organic syntheses.
3. Conversion of different functional group via rearrangement reaction.
5. Basic concept and advanced approaches in supramolecular, carbocyclic rings and asymmetric
synthesis.
It involves disconnection approach and asymmetric synthesis. The students get the knowledge of
synthesis of various simple and complex natural product syntheses. There is scope of getting job in
pharmaceutical industry where multistep synthesis is involved. Second part of course deals with large
molecules which are useful from structural point of view. The students also get an idea about
dendrimers, organic conductors, as well as synthesis and characterization of cage molecules.
Recommended Texts:
1. Warren, S. Organic Synthesis: The Disconnection Approach John Wiley & Sons (1984).
2. Lehn, J. M. Supramolecular Chemistry: Concepts & Perspectives, Print ISBN:9783527293124
Wiley-VCH (2006).
3. Vögtle, F. Supramolecular Chemistry: An Introduction John Wiley & Sons (1993).
__________________________________________________________________________
59
Paper 4202- Organic Chemistry (Elective course 2)
Course Objective: To introduce the basic knowledge of terpenes, steroids, alkaloids, polyphenols
and other related bio molecules
Course A: Terpenes and Steroids
Terpenes and steroids: Classification and biosynthesis of mono- sesqui-, di- and triterpenoids and
steroids. Acetyl CoA, Mevalonic acid, acetoacetyl CoA, squalene to lanosterol, lanosterol to
Cholesterol, Cholesterol to estradiol and progesterone, diosgenin and its utility in hormone synthesis.
General chemistry of the following compounds- Cholesterol, Artemisinin, Gibbereline A3,
Azadirachtin.
Course B: Alkaloids and Polyphenols

Isolation and structure elucidation of alkaloids, Biosynthesis of alkaloids using thiokinase, mixed
function oxygenases, methyl transferases, amino acid decarboxylases.
Total synthesis of morphine, reserpine and ergotamine.
Biosynthesis of flavonoids and related polyphenols. Synthesis of apigenin, luteolin, quercetin,
Diadzen, myrtucommulone A, prenylflavone, binaringenin and biflavanoids.
Course/Learning Outcomes: The students will acquire knowledge of:

1. Classification and importance of various natural products including terpenes, steroids, alkaloids and
polyphenols.
2. Total synthesis of various natural products and biosynthesis
Here the student gets flavour of various natural products synthesis and its characterization which is
commonly found in daily life.
Recommended Texts:
1. Finar, I. L. & Finar, A. L. Organic Chemistry Vol. 2, Addison-Wesley (1998).
2. Finar, I. L. Organic Chemistry Vol. 1, Longman (1998).
3. Mann, J. Secondary Metabolites, Oxford University Press, Oxford, UK, (1980).
___________________________________________________________________________
60
Paper 4203- Organic Chemistry (Elective course 3)
Course Objective: to acquire the knowledge of enolates, Umpolung and Hetrocyclic Chemistry
Course A: Newer Synthetic Reactions and Reagents
Enolates, Thermodynamic versus Kinetic enolates, enonate equivalents and enamines: Applications in
carbon-carbon bond formation and related reactions. Applications in chiral synthesis.
Phosphorus, Sulphur and nitrogen ylides: Preparation, applications in organic synthesis and
mechanism.
Umpolung reactions (sulphur compounds, nitro compounds, lithiated ethers and related compounds).
Principles and applications of phase transfer catalysis, crown ethers and polymer- supported reagents
in organic synthesis.
Principles of Green Chemistry and its applications : Biotransformations: Classification of enzymes,
advantages and disadvantages, Artificial enzymes, applications in organic synthesis; Principles of
ultrasound and microwave assisted organic synthesis. Reactions in ionic liquids.
Course B: Heterocyclic Chemistry

Introduction to heterocycles: Nomenclature, spectral characteristics, reactivity and aromaticity
Synthesis and reactions of three and four membered heterocycles, e.g., aziridine, azirine, azetidine,
oxiranes, thiarines, oxetenes and thietanes.
Five membered rings with two heteroatoms: pyrazole, imidazole, oxazole, thiazole, isothiazole and
benzofused analogs.
Benzofused five membered heterocycles with one heteroatom, e.g. indole, benzofuran,
benzothiophene.
Chemistry of bicyclic compounds containing one or more heteroatoms.
Benzofused six membered rings with one, two and three heteroatoms: benzopyrans, quinolines,
isoquinolines, quinoxazalines, acridines, phenoxazines, phenothiazines, benzotriazines, pteridines.
Seven and large membered heterocycles: azepines, oxepines, thiepines. Chemistry of porphyrins and
spiro heterocycles.
Course/Learning Outcome: The students will acquire knowledge of
1. Application of modern synthetic reactions and reagents in organic synthesis (including Ylides and
Umpolung reaction).
2. Nomenclature and reactivity and synthesis of different heterocyclic compounds.
3. Organic reactions involving green Chemistry.
The students also get an idea about greener approaches such as the usage of microwave and ionic
liquids based synthesis of compounds. They also come to know the natural and artificial enzymes,
ionic liquid chemistry. Second part of course is one of the important topics in chemistry as
heterodynes are widely present in most of clinical drugs. The students will learn how to synthesize
different heterocyclic compounds especially through Green Chemistry approach, its characterization.
This knowledge is useful to fetch job in the pharmaceutical company.
Recommended Texts:
61
2. Carruthers, W. Modern Methods of Organic Synthesis Cambridge University Press (1971).
3. Acheson, R. M. Introduction to the Chemistry of Heterocyclic Compounds John Wiley & Sons (1976).
4. Anastas , Paul and Warner , John C.,Green Chemistry- Theory and Practical, (2005).
5. Alhuwalia, VK and Kidwai, M. New trends in Green Chemistry. Anamaya Publishers, New
Delhi (2003).
6. Ram V. J.; Sethi, A.; Nath, M.; Pratap, R.; (2019), The Chemistry of Heterocycles (Nomenclature
and Chemistry of three to five membered Heterocycles), Elsevier publication.
7. Ram V. J.; Sethi, A.; Nath, M.; Pratap, R.; (2019), The Chemistry of Heterocycles (Chemistry of
six to eight membered N, O, S, P and Se heterocycles), Elsevier publication
_________________________________________________________________________
62
Paper 4204- Organic Chemistry Special-V (Elective course 4) Biomolecules
Course Objective: To acquire the knowledge of structure, function, and physicochemical properties
of bio molecules.
Course A: Proteins and Lipids
Peptides and proteins: Classification of naturally occurring peptides, depsipeptide and peptide
alkaloids with examples, Sequence determination, chemical, enzymatic and mass spectral methods,
Modern methods of peptide synthesis with protection and deprotection, Solid phase synthesis,
combinatorial synthesis of peptides, Chemistry of oxytocin, valinomycin, enkephalins, self assembly
and aggregation of peptides,
Lipids : Classification and biological importance of fatty acids and lipids, stereochemical notation in
lipids, chemical synthesis of phospholipids and glycolipids, properties of lipid aggregates, micelles,
bilayers, lyposomes and biological membranes.
Course B: Nucleic Acids and Carbohydrates

Nucleic acids: Secondary structure of DNA and RNA, stabilizing forces, polymorphic nature of DNA,
multistranded DNA structures, sequence determination by chemical and enzymatic methods, genome
sequencing, chemical synthesis of DNA, solution phase and solid phase synthesis, phosphodiester-
triester and phosphite methods, phosphoramide approach; PNA, LNA, UNA, automated DNA
synthesizers, purification of oligonucleotides, HPLC and gel electrophoresis.
Carbohydrates: Types of naturally occurring sugars, deoxy sugars, amino sugars, branched chain
sugars, sugar methyl ethers and acid derivatives of sugars, polysaccharides of industrial and biological
importance, dextran, chemistry of sialic acids, cell-cell recognition and blood group substances.

1. Physico-chemical properties, and molecular architecture of biomolecules
2. Folding, stability, and dynamics of protein.
3. Transfer of genetic information from one generation to another generation.
4. Synthesis of DNA, its purification and characterization.
This course also discusses about biological roles of lipids and fatty acids, its synthesis and biological
membranes. This knowledge can assist student to get job in pharmaceutical industry. Second part of
course is very important and multidisciplinary topic related to transfer of genetic information from
one generation to another generation. The study provides knowledge of chemical synthesis of DNA,
its purification and characterization. This course also explains carbohydrate chemistry which play
important role in living organism. The students with this expertise in DNA chemistry can get job in
forensic science laboratory as well as in pharmaceutical company.
Recommended Texts:
1. Bodansky, M. Peptide Chemistry: A Practical Textbook Springer-Verlag (1988).
2. Dugas, H. & Penney, C. Bioorganic Chemistry: A Chemical Approach to Enzyme Action Springer-Verlag
(1989).
3. Stryer, L. Biochemistry 4th Ed., W. H. Freeman & Co. (1995).
4. Zubay, S. Biochemistry Addison-Wesley (1983).
5. Sinden, R. P. DNA Structure and Function Academic Press (1994).
63
6. Saenger, W. Principles of Nucleic Acid Structure Springer-Verlag (1984).
7. Gait, M. J., Ed. Oligonucleotide Synthesis-A Practical Approach IRL Press (1984).
64
Paper 4205- Organic Chemistry Special-VI/ Elective course 4
Course Objective: To acquire knowledge of drug design, and development, pharmacokinetics, and
pharmacodynamics.
Course A: Drug Delivery Technologies
Pharmaceutical Techniques Technologies Development
Importance of Targeted Drug Delivery, Efficacy, Safety and Toxicity Issues. Molecular basis of
targeted drug delivery. Drug Release and Uptake Phenomenon. Drug Encapsulation Technologies.
Different Carriers for Drug Encapsulation:
Nanomaterials (metal-based, metal oxide based and polymeric) in drug encapsulation and drug
delivery: their characterization, generation, efficacy, toxicity and release profile.
Factors affecting drug loading and drug release.
Techniques to measure degree of loading and release efficiency. Metabolism and excretion of drug
delivery carriers.
General considerations; Methods of preparations, characterization and applications of liposomes,

ionosomers, resealed erythrocytes, nanoparticulate systems, solid-liquid nanoparticles, dendrimers,
organogels, multiple emulsions and nanoemulsions.
Overview and application of aquasomes, pharmacosomes, liquid crystalline systems, protein and
peptide-based drug delivery systems.
Polymers in drug encapsulation and drug delivery: Classification, synthesis and applications of
biodegradable and natural polymers in formulation of controlled drug delivery systems.
Course B: Pharmaceutical Technologies Development

Drug discovery, lead identification and lead optimization, Chemical, pharmaceutical and clinical
technology development.
Investigational New Drug (IND) and its Applications: criteria, contents, categories, submission,
regulation, noteworthy examples.
Clinical trials: Phase I, II and III clinical trials.
Pilot Plant Scale-Up Techniques: Primary function of the pharmaceutical pilot plant, factors to be
considered during development, reporting responsibilities, personnel requirements, space
requirements, review of the formula, raw materials, relevant processing equipments, production rates,
process evaluation, master manufacturing procedures, GMP consideration, pilot plant design for tablet
development.

1. Drug designing and development, their SAR and QSAR.
2. Mode of action of different drugs.
3. Role of drugs to inhibit the particular enzymes and treatment of disease.
4. Drug delivery and pharmaceutical technologies development
65
This course helps students get aware of targeted drug delivery, efficacy, safety and toxicity Issues.
The students also get knowledge of nano materials in drug encapsulation and drug delivery, its
characterization, generation, efficacy, toxicity and release profile. They also get basic concept of
biodegradable biopolymers. This experience can assist student to get jobs in various pharmaceutical
companies and to plan for small start up companies.
Recommended Texts:
1. Mathiowitz, E., Ed. Encyclopaedia of controlled delivery (1999).

2. Joseph R. Robinson and Vincent H. L. Lee Controlled Drug Delivery – Fundamentals and
Applications.
3. Saltzman, W. Mark Drug Delivery: Engineering Principles and Drug Therapy (Oxford Press)
4. Loyd V. Allen, Jr., Nicolas G. Popovich and Howard C. Arsel Ansel’s Pharmaceutical Dosage Forms
and Drug Delivery Systems.
5. The Art, Science and Technology of Pharmaceutical Compounding – Loyd V. Alen Jr.
6. Theory and Practice of Industrial Pharmacy – Lachmann
7. Pharmaceutics – Aulto
66
Paper 4206- Practical Organic Chemistry – II (Elective practical 2)
Course Objective: To develop experimental skills of various separation and purification techniques.
Part A
1. Separation and qualitative analysis of mixtures containing two components by chemical
methods and physical methods (Separations using acids, bicarbonate bases, water, ether).
2. (i) Separation of active single component and mixture of components from pharmaceutical
tablets; identification of components by m.p., functional groups and spectral data;
(ii) Quantitative estimation of the components in pharmaceutical tablets
3. Application of column chromatography, HPTLC, HPLC, GC etc.
4. Separation of DNA/Proteins by Gel- Electrophoresis
5. (i) Application of spectral data (IR, UV, NMR and mass) for structural elucidation,
(ii) Quantitative estimations of mixtures of compounds, geometrical isomers, keto-enol
tautomers, etc.
Part B
1. Advanced organic synthesis:
Multistage synthesis including photochemical methods; representative examples:
a. Hydroquinone→ Hydroquinone Diacetate → 2,5 -Dihydroxyacetophenone → 2, 5
Dibenzoxyacetophenone
b. Benzaldehyde→ Cinnamic acid → α,β Dibromocinnamic acid→ cis & trans α-
Bromocinnamic acid
c. Chalcone→ chalcone epoxide→ α-Benzoyl phenyl acetaldehyde
d. Benzaldehyde → Bezoin → Benzil → Benzilic acid
e. Resorcinol → 7-Hydroxy-4-methylcoumarin → 7-Acetoxy-4-methylcoumarin → 4-
Methyl-7-hydroxy-8-acetylcoumarin
f. Applications of Grignard Reagent
g. Applications of Wittig reagent
h. Other suitable multi-step synthesis
2. Multi-component synthesis:
a. Mannich Rection (reaction of primary amine, formaldehyde and carbonyl compound)
b. Organic synthesis in water ( Preparation of Hydroxy methyl benzotriazole)
c. Synthesis of Benzimidazole (Condesation of diamines and aldehydes)
d. Synthesis of chromenes and xanthenes
e. Other recent examples of multi-component synthesis
3. Green chemistry:
a. Direct Oxidative esterification of Aldehyde (using Iodine and Alcohol).
b. Use of microwaves in organic synthesis
i. Synthesis of Chalcone
ii. Oxidation of toluene
iii. Esterification
iv. Lipase-catalyzed Esterification / transesterification reactions and other enzymatic
reactions
v. Aldol condensation of Benzil
vi. And other suitable green synthesis
4. Supra-molecular chemistry
High dilution method for the synthesis of Host molecule, clatherates etc.

67
1. Advanced methods of organic synthesis.
2. Synthetic procedures: aqueous workup, distillation, reflux, separation, isolation, and crystallization.
3. Characterization of compounds by using modern analytical techniques.
The Review project will be based on writing a review based on the literature available on assigned
topic followed by power point presentation.
68
Physical Chemistry Special Papers
Paper 4301 –Physical Chemistry Special (Advanced Statistical Mechanics) (Elective course)
Course Objective: This course will provide a comprehensive knowledge about the distribution
function and its relation with macroscopic thermodynamic properties in liquids, different ensembles
and its applications in imperfect gases, Ising Model and various transport phenomena. It also
familiarizes students with basic concepts of computer simulations.
Course A: Statistics of Imperfect Gases and Solids

Grand Canonical Ensemble
Distribution functions in monatomic, one-component systems, Kirkwood-Salsburg integral equation,
Theory of Imperfect Gases and Condensation
Partition functions and cluster integrals, Pressure of gas expressed as a power series in activity,
Irreducible cluster integrals, Virial expansion for a gas, Calculation of Virial coefficients of an
imperfect gas. Theory of condensation.
Lattice Statistics
Ising Model. Nearest neighbor lattice statistics- Thermodynamics and interconnections, Exact and
formal methods.
Computational Techniques
Computer simulation: Motivation and applications, Intermolecular potentials
Molecular Dynamics and Monte Carlo Methods
Course B: Statistical Theory of Liquids

Canonical Ensemble: Definition of distribution and correlation functions, Thermodynamic functions
of a fluid and the radial distribution function, Potential of mean force and the superposition
approximation, Kirkwood integral equation, Born-Green-Yvon (BGY) integral equation, HNC
equation, PY equation, Fluid of hard spheres according to the superposition approximation, Fluid with
modified Lennard-Jones molecular interaction potential according to the superposition approximation.
Supercooled and Ionic Liquids
Theories of transport properties; non Arrhenius behaviour of transport properties, Cohen-Turnbull free
volume model, configurational entropy model,
Experimental Methods for Structure Determination
Spectroscopic techniques for liquid structure studies, Neutron and X-ray scattering.
Course/Learning Outcomes: This course will provide an advanced level in-depth understanding
about various statistical theories of solids, liquids and imperfect gases and their applications. This
course also introduces some basic concepts of computer simulations.
Recommended Texts:
1. Allen, M. P. & Tildesley, D. J. Computer Simulations of Liquids Oxford Science Publications: Oxford
(1987).
2. Hill, T. L. Statistical Mechanics: Principles and Selected Applications Dover Publications Inc.: New York
(1987).
69
3. Landau, L. D. & Lifshitz, E. M. Statistical Physics Vol. 5, Part 1, 3rd Ed., Pergamon Press (1980).
4. McQuarrie, D. A. Statistical Mechanics Viva Books Pvt. Ltd.: New Delhi (2003).
5. Bagchi B. Statistical Mechanics for Chemistry and Material Science, CRC Press (2018).
70
Paper 4302 –Physical Chemistry Special (Advanced Electrochemistry) (Elective course)
Course Objectives: To provide knowledge of the microscopic structure of electrochemical

interfaces and electrochemical phenomena along with derivations of fundamental equations.
Applications of these electrochemical principles and relaxation methods in energy storage/conversion,
electrocatalysis, corrosion, electrodeposition and bioelectrochemistry will be introduced.
Course A: Fundamentals of electrode kinetics and relaxation methods
Electrode Kinetics: Overpotentials, Exchange current density and transfer coefficient, Derivation of
Butler-Volmer equation and its physical implications, Tafel plot, Multistep electrode reactions;
Marcus microscopic model of electron transfer.
Relaxation Methods-Theory and Techniques: Mass transfer by diffusion and electrode surface
constraints. Method of Laplace transform and its application to solve diffusion equation for
electrochemical systems.
Constant Potential Chronoamperometry: Reversible and quasi-reversible charge transfer, Cottrell
equation, Influence of uncompensated solution resistance
Constant Potential Chronoamperometry: Reversible charge transfer, Application of cyclic
voltammetry for characterization of various electrochemical processes.
Constant Current Chronopotentiometry: Reversible and quasi-reversible charge transfer, Sand
equation
Impedance Methods: Reversible and quasi-reversible charge transfer, Warburg equation, Influence of
uncompensated solution resistance, Equivalent circuits models
Course B: Applications of Electrochemistry and Interfacial Structure

Adsorption and Electric Double Layer:
Thermodynamics of the double layer, Electrocapillary phenomena;
Structure of electrified interfaces - Helmholtz, Gouy-Chapman, Stern, Graham-Devanathan-
Mottwatts, Tobin, Bockris, Devanathan models;
Adsorption – Ionic and organic molecules, Adsorption isotherms - Langmuir, Frumkin, Temkin;
Experimental evaluation of surface excesses and electrical parameters.
Conversion and storage of electrochemical energy: Fuel cells, Supercapacitors and Li ion batteries.
Electrocatalysis: Influence of various parameters on water splitting, HER and OER.
Corrosion: Introduction to corrosion, forms of corrosion, Corrosion monitoring and prevention
methods
Semiconductor interfaces: Structure of double layer at the semiconductor-solution interface, Effect of
light at semiconductor-solution interface. Dye sensitized solar cells
Electrocrystallization: Electrogrowth of metals on electrode- Nucleation, Growth, Surface Diffusion,
Underpotential deposition, Variety of shapes formed in electrodeposition.
Bioelectrochemistry: Nerve impulses, Membrane potentials, Nernst-Planck equation, Hodgkin-Huxley
equations, Core conductor model
Electrochemical instrumentations and scanning probe techniques.
71
Course/Learning Outcomes: Course will help in developing skills to solve problems in fundamental
and applied electrochemical systems. Knowledge of electrode kinetics, theories and techniques of
various relaxation methods, viz., constant potential chronoamperometry, constant potential
chronoamperometry, impedance methods, will be acquired by the students. Structures of
metal/electrolyte and semiconductor/electrolyte, various models of electrical double layer,
thermodynamics and electrocapillary phenomena will be learnt.
Recommended Texts:
1. Bard, A. J. Faulkner, L. R. Electrochemical Methods: Fundamentals and Applications, 2nd Ed., John Wiley
& Sons: New York, 2002.
2. Oldham, K. B., Myland, J. C. and Bond, A. M. Electrochemical Science and Technology: Fundamentals
and Applications, John Wiley & Sons, Ltd. (2012).
3. Bockris, J. O’ M. & Reddy, A. K. N. Modern Electrochemistry 1: Ionics 2nd Ed., Springer (1998).
4. Bockris, J. O’ M. & Reddy, A. K. N. Modern Electrochemistry 2B: Electrodics in Chemistry,
Engineering, Biology and Environmental Science 2nd Ed., Springer (2001).
5. Bockris, J. O’ M., Reddy, A. K. N. & Gamboa-Aldeco, M. E. Modern Electrochemistry 2A: Fundamentals
of Electrodics 2nd Ed., Springer (2001).
6. Brett, C. M. A. & Brett, A. M. O. Electrochemistry, Oxford University Press (1993).
7. Koryta, J., Dvorak, J. & Kavan, L. Principles of Electrochemistry John Wiley & Sons: NY (1993).
8. Bagotsky, V.S., Fundamentals of electrochemistry 2nd Ed. Wiley – Interscience, (2006)
9. Hamann, Carl H., Hamneff , Andrew & Vielstich, Wolf., Electrochemistry, 2nd Ed. (2007)
72
Paper 4303 –Physical Chemistry Special (Advanced Photochemistry and Radiation Chemistry)
(Elective course)
Course Objective: The students will be able to understand and explain basic principles of
molecular photochemistry, radiationless transitions, radiation dosimetry and flash photolysis. Course
will familiarize with the theories of multiphoton and reversible energy transfer processes.
Course A: Photochemistry
Molecular photochemistry: Transitions between states (Chemical, classical and quantum dynamics,
vibronic states). Potential energy surfaces; transitions between potential energy surfaces, The Franck-
Condon Principle and radiative transitions. A classical model of radiative transitions. The absorption
and emission of light - state mixing, spin-orbit coupling and spin forbidden radiative transitions,
absorption complexes, delayed fluorescence and phosphorescence.
Photophysical radiationless transitions: Wave mechanical interpretation of radiationless transitions
between state factors that influence the rate of vibrational relaxation. Energy transfer: Theory of
radiationless energy transfer, energy transfer by electron exchange: An overlap or collision
mechanism. The role of energetics in energy transfer mechanism. Diffusion controlled quenching. The
Perrin formulation. Triplet-triplet, triplet-singlet, singlet-triplet energy transfer. Multiphoton energy
transfer processes, reversible energy transfer.
Course B: Radiation Chemistry, Dosimetry and Photolysis

An overview: G-value. The mechanism of interaction of high energy radiation with matter,
Photoelectric effect, Compton effect, Pair production, total absorption co-efficient, excitation and
ionization, Stopping power and linear energy transfer.
Radiation dosimetry: Radiation dose and its measurement, standard free air chamber method,
chemical dosimeter (Frick’s Dosimeter). Short lived intermediates (ions, excited molecules, free
radicals: Various mechanisms of their formation and energy transfer processes).
Flash photolysis: Principle and its applications. Radiolysis of water and aqueous solutions. Radiolysis
of molecules of biological interest (carbohydrates, amino acids, peptides, and nucleic acids).
Course/Learning Outcomes: Students will gain knowledge about different principles and
applications of advanced molecular photochemistry and radiation chemistry.
Recommended Texts:
1. Turro, N. J. Modern Molecular Photochemistry Univ. Science Books (1991).
2. Gilbert, A. & Baggot, J. Essentials of Molecular Photochemistry Blackwell Scientific (1990)
4. McQuarrie, D. A. & Simon, J. D. Physical Chemistry: A Molecular Approach 3rd Ed., Univ. Science
Books (2001).
73
Paper 4304 –Physical Chemistry Special (Computational Methods in Chemistry)
(Elective course)
Course Objective: This course will provide a good understanding and practice of the various
programming languages like BASIC/FORTRAN or C and impart a thorough knowledge of the
empirical and semi-empirical electronic structure calculations and simulations.
Course A:
Programming: BASIC and FORTRAN/C languages. Introduction to LINUX/UNIX and shell scripts.
Some illustrative numerical methods in chemistry: Least squares fit, root finding, numerical
differentiation, integration and solution of ODE, matrix inversion and diagonalization, interpolation.
Pattern recognition techniques and molecular graphics.
Basics of electronic structure calculations, Molecular Mechanics, Monte Carlo and Molecular
Dynamics simulations.
Course B:
Computer experiments: Use of some packages to study molecular electronic structures and molecular
modelling (GAMESS, MOPAC, molecular dynamics packages, etc.) Use of electronic spreadsheets in
chemistry. Basic ideas on structure-activity relationships, drug and catalysis design, etc. Development
of some simulation programs and use of the internet for chemical information retrieval.
Chemoinformatics.
Course/Learning Outcomes: Students are expected to learn various programming languages that
are required for different types of molecular simulations and electronic structure calculations. They
will be able to write independent programs and correctly compile them.
Recommended Texts:
1. Hinchliffe, A. Modelling Molecular Structures 2nd Ed., John Wiley & Sons (2003).
2. Höltje, H-D., Sippl, W., Rognan, D. & Folkers, G. Molecular Modeling: Basic Principles and
Applications 2nd Ed. Wiley-VCH (2003).
3. Leach, A. R. Molecular Modelling: Principles and Applications.2nd Ed. Pearson Education: England
(2001).
4. Press, W. H., Tenkolsky, S. A., Vetterling, W. T. & Flannery, B. P. Numerical Recipes in Fortran/C 2nd
Ed., Cambridge University Press (1996).
5. Lewars, E. Computational Chemistry Kluwer Academic Publishers (2003)
6. Jensen, F. Introduction to Computational Chemistry Wiley (2007)
7. Cramer, C. J. Essentials of Computational Chemistry John Wiley & Sons, England (2002)
74
Paper 4305: Advanced Quantum Chemistry (Physical Chemistry Special)
(Elective course)
Course Objective: To impart advanced level of knowledge on quantum chemistry- various state-of-
the-art methods for solving complex many-body systems. Knowledge of novel techniques will provide
skills on designing modern materials. Perturbation theory for higher orders and degenerate states,
second quantization method, DFT, quantum statistics, Hartree-Fock and post Hartree-Fock methods
will be elaborated.
Course A: Concepts and morphology of many-body quantum chemistry
Perturbation theory- second order for non-degenerate states, first order for degenerate states. Double
perturbation theory. Orbital and spin angular momentum operators of many-body systems, L-S and j-j
couplings. Pauli matrices Term symbols and term energies. Hohenberg-Kohn theorem. Nature of
electron density distribution and Density Functional Theories (DFT). Density functional interpretation
of some concepts (electronegativity, electronegativity equalization, softness and hardness, etc).
Electron correlation in DFT, Kohn-Sham equation and its applications. Quantum tunnel effect.
Introduction to second quantization in chemistry, Fermi and Bose gases.
Course B: Treatments to complex quantum chemical systems
Many-electron systems. Antisymmetrization, determintantal wavefunctions. Matrix elements for one

and two electron operators. Secular equation for many-electron Slater determinantal functions,
Hartree-Fock Self-Consistent-Field methods. Roothaan equations. Koopmans and Brillouin theorems.
Basis sets (Slater, Gaussian and integral transform), Basis Set Superposition Error (BSSE), Electron
correlation and CI theories. A review of HMO, EHT and PPP methods. ZDO approximation and
CNDO, INDO and other semi-empirical theories.
Course/Learning Outcomes: Students will gain an advanced level understanding of the many-
electron systems (perturbation theory and variation principles), quantum statistics, tunnel effect
applicable to chemical and biological systems, second quantization, density functional theory,
Hartree-Fock-Self-Consistent-Field method and other semi-empirical theories and post Hartree-Fock
methods, respectively, with their applications in chemistry.
Recommended Texts:
1. Lowe, J. P. & Peterson, K. Quantum Chemistry Academic Press (2005).

2. Mortimer, R. G. Mathematics for Physical Chemistry 2nd Ed. Elsevier (2005).
3. Pilar F. L. Elementary Quantum Chemistry 2nd Ed., Dover Publication Inc.: N.Y. (2001).
4. Atkins, P. W. & Paula, J. de Atkin’s Physical Chemistry 8th Ed., Oxford University Press
(2006).
5. Atkins, P. W. & Friedman, R. S. Molecular Quantum Mechanics 3rd Ed., Oxford University
Press (1997).
6. Levine, I. L. Quantum Chemistry 5th Ed., Prentice-Hall Inc.: New Jersey (2000).
7. Engel, T. & Reid, P. Physical Chemistry Benjamin-Cummings (2005).
75
8. McQuarrie, D. A. & Simon, J. D. Physical Chemistry: A Molecular Approach 3rd Ed., Univ.
Science Books (2001).
9. Silbey, R. J., Alberty, R. A. & Bawendi, M. G. Physical Chemistry 4th Ed. Wiley (2004).
10. Martin, R. M. Electronic Structure (basic theory and practical methods), Cambridge Univ.
Press (2004).
11. Springborg, M. Methods of Electronic Structure Calculations, Wiley (2000).
76
Paper 4306 –Physical Chemistry Special (Advanced Chemical Kinetics) (Elective course)
Course Objective: To impart advanced level knowledge about the statistical theories of chemical
kinetics, fundamentals of reaction dynamics and phenomenological aspects of complex reactions.
Course A: Statistical theories of kinetics and complex reactions
Statistical theories of kinetics: Collision theory. Activated Complex theory. Potential energy surfaces-
attractive and repulsive forces. Lindemann’s theory of unimolecular reactions- energy transfer, fall-off
region and its limitations. Rice-Ramsperger and Kassel (RRK) model, and Marcus refinement of RRK
model (RRKM) for the calculation of rate constants of simple unimolecular (isomerization) reactions.
Complex reactions: Chain reactions and oscillatory reactions, Photochemical reactions, Homogeneous
catalysis.
Course B: Reaction dynamics and enzyme kinetics

Enzyme kinetics: Michaelis-Menten mechanism - single and double intermediates. King-Altman
method for working out the kinetics of complex enzyme reactions.
Enzyme inhibition- reversibility and products inhibition. Computer simulation in chemical kinetics.
Reaction Dynamics: Molecular beams, principle of crossed-molecular beams. Molecular encounters
and principal parameters, e.g. Impact parameter, Collision cross-section, Reaction cross-section and
relation between reaction cross-section and reaction rate (single velocity). Dependence of collisional
cross-section on translational energy.
Probing the transition state, Dynamics of barrierless chemical kinetics in solution, dynamics of
unimolecular reactions.
Learning Outcomes: Students are expected to learn the detailed statistical theories of the rates of
chemical reactions, phenomenological behavior of complex reactions along with enzyme kinetics and
fundamental of reaction dynamics.
Recommended Texts:
1. Pilling, M. J. & Seakins, P. W. Reaction Kinetics Oxford Press (1997).
2. Laidler, K. J. Chemical Kinetics 3rd Ed., Benjamin Cummings (1997). .
77
Paper 4307 –Physical Chemistry Special (Advanced Molecular Spectra) (Elective course)
Course Objective: To impart advanced level knowledge about the various aspects of vibrational,
electronic & ESR spectroscopies, group theory and their use in molecular structure determination.
Course A: Vibrational and electronic spectroscopy

Vibrational spectroscopy: Group theory and symmetry classification of normal modes of vibration.
Normal coordinate analysis in Cartesian and internal coordinates of small molecules: BF3, NH3.
Square planar, trigonal bipyramid, framework and cage molecules. Jahn-Teller distortions.
Electronic spectroscopy: Electronic spectroscopy of transition metal complexes. Octahedral and
tetrahedral complexes, Correlation diagrams for octahedral fields and fields of lower symmetry.
Electronic spectroscopy of organic molecules - benzene, effect of substitution- pyridine, pyrimidine,
pyrazine, methyl substitution. Vibronic analysis.
Course B: ESR spectroscopy
Electron Spin Resonance spectroscopy: Basic principles. Relaxation and Line Widths. Zero-field
splitting and Kramer’s degeneracy. g-factor for paramagnetic ions. g-factor for organic radicals.
Factors affecting the g-factor.
Isotropic and anisotropic hyperfine coupling constants. Spin Hamiltonian, Spin densities and
McConnell relationship. Fine splitting in triplet spectra.
Applications of ESR spectroscopy - Structure determination, Interpretation of ESR spectra of simple
organic radicals like benzene radical anion, naphthalene radical anion, toluene and o-, m- and p-xylene
radical ions from HMO theory. Study of unstable paramagnetic species, Kinetic studies of electron
transfer reactions, Spin-labelling studies of biomolecules.
Course/Learning Outcomes: Fundamental understanding of vibrational, electronic & ESR
spectroscopies for atomic and molecular characterization.
Recommended Texts:
1. Harris, D. C. & Bertolucci, M. D. Symmetry and Spectroscopy: An Introduction to Vibrational and
Electronic Spectroscopy Dover Publications: New York (1990).
2. Bishop, D. M. Group Theory and Chemistry, Clarendon Press: Oxford, U.K. (1973).
3. Satyanarayana, D. N. Handbook of Molecular Spectroscopy: From radio waves to gamma rays, I.K.
International Publishing House, New Delhi (2015).
4. Kakkar, R. Atomic & Molecular Spectroscopy, Cambridge University Press (2015).
_______________________________________________________________________________
78
Paper 4308 –Physical Chemistry Special (Crystal Structure) (Elective course
Course Objective: To impart advanced level knowledge about the various aspects of crystal
structures and diffraction methods for the structure determination of crystalline and amorphous solids.
Course A: Theory of crystal structures
Overview: Description of a crystal structure in terms of atom positions, unit cells, and crystal
symmetry; Relation of the crystal symmetry to the symmetry observed in a diffraction experiment for
primitive, orthorhombic, tetragonal, trigonal, hexagonal, and cubic crystal systems. Concept of
Reciprocal space.
Scattering and Diffraction Theory
X-ray Diffraction: Interaction of radiation with condensed matter and how this can be used in
generalized crystallography. Bragg condition, Miller indices, Laue method, Bragg method, Debye-
Scherrer method of X-ray structural analysis of crystals, index reflections, identification of unit cells
from systematic absences in diffraction pattern. Structure of simple lattices and X-ray intensities,
Structure factor and its relation to intensity and electron density, Fourier synthesis. Phase problem,
Patterson synthesis. Heavy atom method. Direct method. Refinement, R factor. Fourier refinement.
Least squares refinement. Determination of absolute configurations (Bijvoet method). Chemical
interpretation of results. Estimation of errors. Effects of thermal motion, limitations. Description of
the procedure for an X-ray structure analysis, absolute configuration of molecules.
Crystal defects and non-stoichiometry: Perfect and imperfect crystals, intrinsic and extrinsic defects-
point defects, line and plane defects, vacancies- Schottky defects and Frenkel defects.
Thermodynamics of Schottky and Frenkel defect formation, colour centres, non-stoichiometry and
defects.
Course B: Electronic, magnetic and diffraction properties
Protein Crystallography
Basics of modern protein crystallography using Web-based material; different levels of structure
exhibited by proteins; instrumentation, steps, and methods used in protein crystallography with
appropriate case studies; concept of non-crystallographic symmetry to protein crystallography,
Ramachandran diagram.
Electronic properties and Band Theory: Metals, insulators and semiconductors, electronic structure of
solids- band theory, band structure of metals, insulators and semiconductors, intrinsic and extrinsic
semiconductors, doping semiconductors, p-n junctions, super conductors.
Magnetic properties- Classification of materials: Quantum theory of paramagnetics - cooperative
phenomena - magnetic domains, Hysteresis.
Organic solids: Electrically conducting solids, organic charge transfer complexes, organic metals,
new superconductors.
Electron Microscopy: Fundamentals of electron microscopy as a useful subsidiary technique for
crystallographers; Examples of its application in materials science and macromolecular structural
biology.
Electron diffraction: Scattering intensity versus scattering angle, Wierl equation, measurement
technique, elucidation of structure of simple gas phase molecules. Low energy electron diffraction and
structure of surfaces.
79
Neutron diffraction: Scattering of neutrons by solids and liquids, magnetic scattering, measurement
techniques. Elucidation of structure of magnetically ordered unit cells.
Course/Learning Outcomes: This course provides a background of the basic principles of

symmetry and crystal structures investigated through diffraction and scattering methods in structure
determination of crystalline, amorphous, organic materials and proteins. In addition, students will
learn about the electronic and magnetic properties of metals and semiconductors.
Recommended Texts:
1. Moore, E. & Smart, L. Solid State Chemistry: An Introduction 2nd Ed. Chapman & Hall (1996)
2. Rhodes, G. Crystallography Made Crystal Clear: A Guide for Users of Macromolecular Models 3rd Ed.
Elsevier (2006)
3. Massa, W. Crystal Structure Determination 2nd Ed. Springer (2004).
4. Warren, B. E., X-Ray Diffraction 1st Ed. Dover Publications (1990).
5. Sands, D. E. Introduction to Crystallography Reprint Dover Publications (1994).
________________________________________________________________________________
80
Paper 4309 –Physical Chemistry Special (Macromolecules)(Elective course)
Course Objective: To impart advanced level knowledge about the various properties of
macromolecules. Course will introduce fundamentals of single chain, solutions, gels, melts and electrically
conducting polymer.
Course A: Fundamentals of single chain, solutions, gels and melts
Properties of an isolated polymer molecule: Ideal chain, Freely joined Gaussian chain, Distribution of
segments in polymer chain, non ideal chain, excluded volume, Dimension of real chains and scaling
laws, Self-avoiding walk
Concentrated solution and melts: Thermodynamic properties of polymer solutions, concentration
fluctuation in polymer solutions, polymer blends, block copolymer
Polymer gels: Elasticity of rubber, Stress optical law, interaction between partial chains, swelling of
gels
Molecular motion of polymers in dilute solution: General theory of Brownian motion, Rouse and
Zimm Bead spring models, hydrodynamics interactions, dynamic light scattering
Molecular motion in entangled polymer systems: Qualitative aspects
Course B: Microstructure, Kinetics and Electrically Conducting Polymer

Polymer microstructure: Microstructure based on chemical structure and geometrical structure.
Meaning of glass transition temperature (Tg), factors influencing the glass transition temperature,
importance of glass transition temperature Tg and molecular weight, Tg and melting point
Structure of macromolecules: Polymer crystals: crystallization in polymers, factors determining
crystal structure. Morphology of solution grown single crystal and bulk grown crystal. Semi-
crystalline polymers: spherulites, degree of crystallinity, crystallization and melting. Kinetics of
crystallization. Molecular mechanism of crystallization, factors affecting melting.
Kinetics of polymerization: Kinetics and statistics of step growth polymerization, size distribution in
linear polymers, nonlinear polymerization and prediction of gel point. Kinetics of free radical chain
polymerization, cationic polymerization, anionic polymerization and polycondensation.
Electrically conducting polymers: Discovery of electrically conducting polymers, Factors affecting
the conductivity of conducting polymers. Electrochemical polymerization. Nature of charge carriers in
conducting polymers: solitons, polarons and bipolarons. Mechanism of conduction in polymers.
Stimuli-sensitive (smart) polymers: pH- and temperature-sensitive smart polymers and their
applications in biotechnology and medicine.
Course/Learning Outcomes: This course commences from the fundamental properties of a single
chain polymer and broadly covers polymer microstructure, crystallization electrically conducting and
smart polymers with their applications.
Recommended Texts:
1. Teraoka, I., Polymer Solutions, Wiley-Interscience, A John Wiley & Sons Inc.( 2002).
2. Doi, M., The Introduction of Polymer Physics, Clarendon Press Oxford (1995).
3. DeGennes, P. G. Scaling Concepts in Polymer Physics Cornell University Press (1979).
4. Young, R. J. & Lovell, P. A. Introduction to Polymers 2nd Ed. Chapman & Hall (1991).
________________________________________________________________________________
81
Paper 4310 –Physical Chemistry Special (Biophysical Chemistry) (Elective course) Credits)
Course Objective: To impart advanced level knowledge about the thermodynamic principles of
various biological macromolecules along with different experimental methods of their structure
determination.
Course A: Fundamentals of biological macromolecules

Chemical bonds in biological systems; Properties of water; Thermodynamic principles in biological
systems; Properties and classification of amino acids; polypeptide chain geometries and internal
rotational angles; Ramachandran plots; Structures of nucleic acids. Protein structure and function.
Stabilizing interactions in biomolecules; Properties of nucleosides and nucleotides; composition of
nucleic acids.
Methods for the separation of biomolecules: General principles, including Chromatography;
Sedimentation, Moving Boundary Sedimentation, Zonal Sedimentation, Electrophoresis, Isoelectric
focusing, Capillary electrophoresis, MALDI-TOF.
Course B: Conformational analysis and structural determinations

Complexities in modelling macromolecular structure; Molecular mechanics; simulating
macromolecular structure; energy minimization; Molecular Dynamics.
Physical methods: Ultracentrifugation and other hydrodynamic techniques; Light scattering,
fundamental concepts, scattering from a number of small particles: Rayleigh scattering, scattering
from particles that are not small compared to the wavelength of radiation; Dynamic light scattering;
Low angle X-Ray scattering; Neutron scattering; Raman scattering
Optical methods and applications: Optical techniques in biological systems: Absorption spectroscopy,
Fluorescence spectroscopy, Linear and Circular Dichroism, Single and multidimensional NMR
spectroscopy. Single molecule spectroscopy of biomolecules.
Course/Learning Outcomes: The student will learn basic and advanced thermodynamic principles
of the structure of biological macromolecules along with some of the experimental methods required
for their characterization.
Recommended Texts:
1. Cantor, C. R. & Schimmel Biophysical Chemistry Vols. 1-3, W. H. Freeman (1980).
2. Lehninger, A. L., Nelson, D. L. & Cox, M. M. Lehninger Principles of Biochemistry 4th Ed.,
W. H. Freeman (2004).
__________________________________________________________________________
82
Paper 4311 –Physical Chemistry Special (Physical Chemistry of Materials) (Elective course)
Course Objective: To impart knowledge about the principles of various hard and soft materials
along with their properties and characterization methods.
Course A: Soft Materials
Thin Films and Langmuir-Blodgett films
Preparation techniques, evaporation/sputtering, chemical processes, MOCVD, sol-gel, etc. Langmuir-
Blodgett (LB) film, growth techniques, photolithography, properties and applications of thin and LB
films.
Liquid crystals: Mesomorphic behaviour, thermotropic liquid crystals, positional order, bond
orientational order, nematic and smectic mesophases, smectic-nematic transition and clearing
temperature- homeotropic, planar and schlieren textures, twisted nematics, chiral nematics, molecular
rearrangement in smectic A and smectic C phases, optical properties of liquid crystals. Dielectric
susceptibility and dielectric constants. Lyotropic phases and their description of ordering in liquid
crystals.
Colloids: Types of colloids, forces between colloidal particles, characterization of colloids, charge
stabilization, steric stabilization, effect of polymer on colloid stability, kinetic properties, sols, gels,
clays, foams, emulsions, food colloids, concentrated colloidal dispersions.
Polymer: Polymer melts- The tube model, viscoelastic behaviour, experimental observations of single
chain dynamics- Rouse and Zimm models, polymer blends, copolymers, incompatibility and
segregation.
Course B: Glasses, Ceramics, High Tc Materials and Devices

Glasses, ceramics, composites and nanomaterials. Glassy state, glass formers and glass modifiers,
Applications. Ceramic structures, mechanical properties, clay products. Refractories, characterization,
properties and applications.
Microscopic composites, dispersion strengthened and particle-reinforced, fibre-reinforced composites,
macroscopic composites. Nanocrystalline phase, preparation procedures, special properties,
applications.
Ionic conductors: Types of ionic conductors, mechanism of ionic conduction, interstitial types
(Frenkel); vacancy mechanism, diffusion superionic conductors; phase transitions and mechanism of
conduction in superionic conductors, examples and applications of ionic conductors.
High Tc materials: Defect perovskites, high Tc superconductivity in cuprates, preparation and
characterization of 1-2-3 and 2-1-4 materials, normal state properties; anisotropy; temperature
dependence of electrical resistance; optical phonon modes, superconducting state; heat capacity;
coherence length, elastic constants, position lifetimes, microwave absorption-paying and multigap
structure in high Tc materials, applications of high Tc materials.
Materials for solid-state devices: Rectifiers, transistors, capacitors IV-V compounds, low-dimensional
quantum structures; optical properties.
Organic solids, fullerenes, molecular devices: Conducting organics, organic superconductors,
magnetism in organic materials.
83
Fullerenes - doped fullerenes as superconductors.
Molecular rectifiers and transistors, artificial photosynthetic devices, optical storage memory and
switches- sensors.
Nonlinear optical materials: nonlinear optical effects, second and third order- molecular
hyperpolarizability and second order electric susceptibility- materials for second and third harmonic
generation.
Course/Learning Outcomes: This course provides the knowledge of fundamental physical and
unusual properties of soft material systems, viz. liquid crystals, colloids, polymers, and hard material
systems, viz. glasses, ceramics, composites and nanomaterials.
Recommended Texts:
1. Ashcroft, N. W. & Mermin, N. D. Solid State Physics Holt-Saunders (1976)
2. Callister, W. D., Jr. Materials Science & Engineering: An Introduction John Wiley & Sons: New York
(2000).
3. Keer, H. V. Principles of the Solid State Wiley Eastern Ltd.: New Delhi (1993).
4. Gray, G. W., Ed. Thermotropic Liquid Crystals John Wiley & Sons: New York (1987).
5. Serpone, N. & Pelizzetti, E. Photocatalysis: Fundamentals and Applications John Wiley & Sons (1989).
6. Cowie, J. M. G. Polymers: Chemistry and Physics of Modern Materials 2nd Ed. CRC Press (1991)
7. Hamley, I. W. Introduction to Soft Matter: Polymers, Colloids, Amphiphiles and Liquid Crystals John
Wiley & Sons (2000).
(Note: Papers belonging to physical chemistry teaching in semester-IV may combine any two parts, viz.
course A or course B, of same or different elective papers (4301 to 4311). These combined courses will
form 4 elective papers. Available elective papers will be displayed on the web site of Department of
Chemistry before the beginning of the semester.)
_____________________________________________________________________________
84
Paper 4312- Practical Physical Chemistry- II (Elective practical 2)
Set A
COMPUTER PROGRAMMING
BASIC programming
1. Numerical methods and their applications in chemistry
2. Some typical exercises based on the above
i. Decimal-binary conversion
ii. Numerical differentiation, quadrature and finding roots
iii. pH of a weak acid
iv. Roots of cubic equations (e.g. van der Waals’ equation)- iterative, Newton-Raphson,
Binary bisection, Regula-Falsi methods.
v. Titration curves and end-point location
vi. Numerical integration (Trapezoidal, Simpson’s rule)
vii. H and S from Cp data
viii. Chemical kinetics simulations
ix. Least-squares fit including graphics
x. Numerical solution of differential equations (e.g. in kinetics)
xi. Intrapolation & interpolation of data
xii. Gauss-Siedel method and its use in solving simultaneous equations (e.g. Lambert-Beer’s
law)
Set B
SPECTROPHOTOMETRY
1. Record the UV spectra of a weak acid (p-nitrophenol in 1:4 ethanol:water mixture) at different
pH and determine the dissociation constant in the ground state.
2. (a) Record the UV spectra of a weak acid (α-naphthol) at different pH and determine the
dissociation constant in the ground state.
(b) Record the fluorescence spectra of a weak acid (α-naphthol) at different pH and determine the
dissociation constant in the excited state.
Comment on the difference in the two values using MO theory.
3. (a) Record the UV spectra of methyl orange at different pH and determine its dissociation constant.
(b) Study the effect of surfactant on the pKa value of methyl orange.
4. Find the stoichiometry of the charge transfer (CT) complex formed between thiocyanate ions and
iron(III) by Job’s method of continuous variation. Determine the concentration equilibrium
constant and extinction coefficient for the charge transfer complex by applying the Benesi-
Hildebrand equation.
5. Repeat Expt. 4 for salicylate ions in place of thiocyanate ions.
6. Record the UV spectra of benzene, pyridine and pyrimidine in methanol. Compare and discuss the
various transitions involved in terms of MO theory.
85
SET C
CYCLIC VOLTAMMETRY, IMPEDANCE, CHRONOPOTENTIOMETRY, EIS DATA
ANAYSIS AND SIMULATIONS
CYCLIC VOLTAMMETRY
1. Reset the CV of aqueous solution of sulphuric acid (0.5 M) at Pt electrode as working electrode and
counter electrode.
(a) Interpret and explain various peaks and regions of the CV and their significance.
(b) Determine the area and roughness factor of the electrode by H-adsorption and H-desorption.
(c) Determine the area and roughness factor of the electrode by Pt oxide region.
2. Determine the extent of catalytic activity of the Pt electrode by H2 evolution reaction (HER) and
O2 evolution reaction (OER).
IMPEDANCE
3. Verify Warburg equation using electrochemical impedance spectroscopy. Perform experiment with
various bias potentials around CV peak potential.
4. Determine the exchange current density, α (symmetry factor) and double layer capacity of a redox
reaction using platinum electrode (aqueous solution of 10 mM (Fe(NH4)2(SO4)2 + Fe(NH4)
2(SO4)2)) in 1 M HClO4.
CHRONPOTENTIOMETRY
5. (a) Verify the Sand equation using galvanostatic chronopotentiometry.
(b) The surface area of an electrode is determined via a chronopotentiometric measurement.
3-
(c) Determine the diffusion coefficient of the ion [Fe(CN)6]
EIS DATA ANALYSIS AND SIMULATIONS
6. Determine the best fit model from electrochemical EIS data and extract electrochemical system
parameters from the given impedance data using equivalent circuit models, viz. Resistor capacitor,
Randles, Warburg, CPE, CPE with diffusion, etc.
Set D
COLOURIMETRY, DIGITAL POLARIMETRY

COLOURIMETRY
1. Study the kinetics of oxidation of isopropyl alcohol/ ethanol by potassium dichromate. Determine
the order, rate constant, energy of activation and possible mechanism for the reaction.
3+
2. Find the stoichiometry of the complex formed between a metal ion (Fe ) and a ligand (salicylate)
by Job’s continuous variation method and determine the stability constant of the complex formed.
3+
3. Find the stoichiometry of the complex formed between a metal ion (Fe ) and a ligand (thiocyanate) by
Job’s continuous variation method and determine the stability constant of the complex formed.
4. Study the kinetics of hydrolysis of 4-nitrophenyl ethanoate in the presence of base.
5. Determine the dissociation constant of an indicator (methyl red) colourimetrically.
DIGITAL POLARIMETRY
6. Determine the velocity constant for the mutarotation of D(+) glucose and determine the order of
the reaction and the equilibrium concentrations of the two forms.
7. (a) Determine the specific rotation constant for sucrose.
(b) Study the acid catalyzed inversion of cane sugar, and find out
86
(i) the order with respect to sucrose;
(ii) the rate constant;
(iii) Compare kinetically the strengths of two acids (HCl and H2SO4)
SET E
PHOTOCHEMISTRY & NANOSCIENCE
3+
1. Determine the intensity of light from a UV source using the reaction between Fe and oxalate ions
by photosensitization-Ferrioxalate actinometer.
2. (a) Study the photochemical decomposition reaction of cyclohexanone pH-metrically.
(b) Study the above reaction conductometrically.
3. Prepare the transition metal complex cyano acid of potassium ferrocyanide (or ferricyanide) by the
ion-exchange method.
(a) Determine the nature of this acid by the conductometric method.
(b) Study the titration curves of the photolyzed acid (UV radiation), and suggest a possible
mechanism for its decomposition.
NANOSCIENCE
4. (i) Determine the rate constant of the redox reaction between hexacyanoferrate and
thiosulphate ons in the presence and absence of gold nanoparticles.
(ii) Determine the temperature coefficient, activation energy and other thermodynamic
parameters of the reaction.
5. Prepare gold nanostructures by reducing auric chloride with tea extract in presence of CTAB
as capping agent, and characterize spectrophotometrically.
6. Prepare CdS nanonparticles and record their UV/Vis spectra.
7. Prepare CdSe quantum dots and record their absorption and emission spectra.
(Note: Depending on availability of time, some experiments may be added/deleted during the
semester. II & IV semester experiments may be interchanged depending on availability of
instruments.)
Recommended Practical Chemistry Manuals and Books:

1. Vogel, A. I. Vogel's Qualitative Inorganic Analysis - 7th ed. (revised by G. Svehla) Longmans
(1996) ISBN 058-221866-7
2. Vogel, A. I. Vogel's Textbook of Quantitative Chemical Analysis - 5th Ed. Longman (1989).
3. Addison Ault Techniques and Experiments for Organic Chemistry 6th Ed. University Science Books
(1998).
4. Mann, F. G. & Saunders, B. C. Practical Organic Chemistry 4th Ed. Orient Longmans (1990).
5. Vogel, A. I. Vogel's Textbook of Practical Organic Chemistry 5th Ed. (revised by A.R. Tatchell et
al.) Wiley (1989) ISBN 0582-46236-3
9. Daniels, F., Williams, J. W., Bender, P., Alberty, R. A., Cornwell, C. D. & Harriman, J. E.
Experimental Physical Chemistry, McGraw-Hill (1962).
10. Das & R. C. & Behera, B., Experimental Physical Chemistry, Tata McGraw-Hill Publishing Co.
Pvt. Ltd. (1993).
11. Shoemaker, D. P., Garland, C. W. & Nibler, J. W. Experiments in Physical Chemistry, McGraw-
Hill: New York (1996).
12. Day, R. A., Jr. & Underwood, A. L. Quantitative Analysis 3rd Ed. Prentice-Hall India Pvt. Ltd.:
New Delhi (1977).
13. Burns, D. T. & Rattenbury, E. M. Introductory Practical Physical Chemistry Pergamon Press
(1966)
87
14. Harris, D. C. Quantitative Chemical Analysis 6th Ed. W. H. Freeman & Co. (2002).
15. Willard, H. H., Merritt, L. L., Dean, J. A. & Settle, F. A. (Eds.) Instrumental Methods of Analysis -
7th Ed., Wadsworth Publishing (February 1988) ISBN 0534081428
16. Noggle, J., Physical Chemistry Using Mathcad Newark, DE, 1997.
rd
17. Rogers, D. Computational Chemistry Using the PC, 3 Edition Wiley-Interscience (2003).
18. Quinn, C.M. Computational Quantum Chemistry, Series, Academic Press (2002).
19. Holze, R. Experimental Electrochemistry, John Wiley & Sons (2009)
___________________________________________________________________________
The Review project will be based on writing a Dissertation followed by assigned topic through
presentation.
88
THANKS TO ALL
89

M SC - Chemistry

Uploaded by

Copyright:

Available Formats

M SC - Chemistry

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

M SC - Chemistry

Uploaded by

Copyright:

Available Formats

I.

ABOUT THE DEPARTMENT

(ii) 'Course' means a segment of a subject that is part of an Academic Programme

Programme Objectives (PSOs):

Programme Outcomes (PSOs):

Part I First Year Semester I Semester II

Course Credit Scheme

Number of elective courses Nil

Total credits in Semester I 18

Number of elective courses Nil

Total credits in Semester II 18

Number of elective courses One ( 1 Practical)

Number of open electives One

Total credits in Semester III 24

Number of core courses Nil

Number of elective courses Four ( 3 Theory + 1 Practical)

Total credits in elective course 28

Total credits in Semester IV 28

Examination and Scheme of Papers

104-O Organic Chemistry – I Continuous 50 2

104-P Physical Chemistry – I Continuous 50 2

Paper 202 Organic Chemistry – II 3 100 4

Organic Chemistry – II Continuous

Physical Chemistry-II Continuous

Paper Title Duration of Maximum Credits

Inorganic Chemistry – III Inorganic Reaction

Paper Title Duration of Maximum Credits

Paper Title Duration of Maximum Credits

Physical Chemistry Special

Practical Physical Chemistry - II Continuous #

Paper 4313 Review Project 2 days x 6 = 12 100 4

GRAND TOTAL (M.Sc. Course) 2200 88

Selection of Elective Courses:

Eligibility for Merit

3.3 A candidate is allowed to reappear ONLY in THEORY papers to improve his/her

Pass Percentage and Promotion Criteria:

Paper 101- Inorganic Chemistry-I (Core course 1)

Course Objective: To impart advanced knowledge on the analytical chemistry aspects of

Course A: Stability constants of metal complexes and their applications

Analytical applications of complex formation; gravimetric analysis, complexometric titrations

Course B: Supramolecular and Photoinorganic Chemistry

Introduction: Molecules and Supramolecules, Supermolecules, Large Molecules Classification,

Practical core course 1 (50 Marks/ 2 credits)

Marks : 100 Duration : 3 hrs.

Course Objective: To impart advanced knowledge of reactive intermediates, stereochemistry of

Course A: Reactive Intermediates in Organic Chemistry

Course B: Stereochemistry of Organic Compounds

Practical core course 2 (50 Marks/ 2 credits)

Course Objective: To develop experimental skills of various separation and purification

Course/Learning Outcome: The students will acquire knowledge of:

Linear operators, matrices as linear operators, geometrical operations. Properties of determinants.

Special functions: Properties of Legendre polynomials. Orthogonality, Rodrigues’ formula,

Course B: Quantum Chemistry and Approximate Methods

Chemical bonding: Born-Oppenheimer approximation. Variational treatment of hydrogen molecule

1. Lowe, J. P. & Peterson, K. Quantum Chemistry Academic Press (2005).

3. Titrate a solution of Mohr's salt against potassium permanganate potentiometrically. (ii).

Course Objective: To impart advanced knowledge on fundamental aspects of classifying molecules

Course A: Group Theory and its Applications