#SPRINGBREAKOUT

WEBSTER
MASK
 DIFFICULTY LEVEL: MEDIUM
TIME REQUIRED: 2 - 2.5 HOURS

REQUIRED A SPECIAL NOTE

MATERIALS ABOUT PRINTING
- Printer This mask is designed to be printed on
- A4 or US letter size printer paper US Letter paper (8 1/2" x 11") or A4 paper
- Spray adhesive or a glue stick (210mm x 297mm).
- Scissors
- Glue (or Clear tape) Make sure that the "print to scale" option
- Folding bone or thick sewing needle is blank/not checked on your printer settings
- Ruler to ensure that the pages print
- Elastic band or string at the intended size.

11 sheets of card stock You can check the scale by measuring the
- 4 sheets yellow - (300gsm/110lb cover) printed line on the first pattern page with
- 2 sheets orange - (300gsm/110lb cover) a ruler.
- 1 sheet white - (300gsm/110lb cover)
- 2 sheets purple - (160gsm/60lb)
- 1 sheet blue - (160gsm/60lb)
- 1 sheet black or paper - (160gsm/60lb)

The weight [GSM] of the cardstock is our recommendation,

but any other thickness will work too.

2/17 #SPRINGBREAKOUT
 INSTRUCTIONS FOR
PRINTING AND FOLDING

If your printer can handle thicker paper, print directly on your

cardstock and skip step 1. When using thicker or black cardstock,
we recommend printing on thin paper and adhering the mask pieces to
cardstock. Both methods will result in the printed lines and pattern
guide numbers being hidden on the inside of the finished mask.

(1) Print your mask pieces on printer paper. (3) Using a folding bone or a thick sewing needle
Cut the pieces out roughly and glue them to and a ruler, score along the folding lines.
the back of your cardstock with a spray
adhesive or a glue stick.

5
C1
it e
wh

C1
w h it
e
4

(2) Cut out the pattern pieces along the (4) Refer to the diagram below and fold along
solid cutting lines. the creases, either bringing the two edges
towards you (Valley Fold) for the plain dashed
line folds or away from you (Mountain Fold)
for the dot/dashed line folds.
4
5

wh
it e
C1

Mountain fold line

Note: the dashed lines are folding lines, Valley fold line
make sure not to cut them!

3/17 #SPRINGBREAKOUT
 MASK ASSEMBLY INSTRUCTIONS

Lay out the pieces

Each piece is labelled. Place the pieces Option 1 / Easy clear adhesive tape
in alphabetical order. Note: symmetrical
Place a piece of tape on the outside of the pattern
pieces have the same letter but a different
covering the joint where the two edges meet.
number. (A1 < symmetrical > A2).
Tape all pieces together.
Pro: easy and fast!
Con: tape is visible from the outside
A1 A2
14
50 51
13
51
14

B
7 3

Option 2 / Advanced glue

Find matching pieces A thin strip is all you need on the glue tab.
Start with piece A and piece B. Each has Press the glue tab firmly to its matching number.
small numbers along its edges. A number from Continue this process for each piece in
piece A will be an exact match with a number alphabetical order. The glue tab and number
from piece B. Locate the glue tab below one of should not be visible from the outside of the mask.
the matching numbers.
Pro: invisible!
Con: time consuming

Glue tab
7 29 Glue

J K
31

31

5 27

Inside view Outside view

Done!
We recommend using one of the
Now let your creativity flow. You can decorate
following methods for attaching the
and color your mask any way you like.
mask pieces together.

4/17 #SPRINGBREAKOUT
 PATTERN GUIDE A
C

A B

F1

E F2

Start with pattern piece A and

continue in alphabetical order.

Glue all colored elements like 3D stickers to the mask!

Use thinner cardstock or paper for these elements!

5/17 #SPRINGBREAKOUT
 PATTERN GUIDE B
Mohawk

H1
H3
G H2

H4

1. 2.
Build the base. Attach the fringes to both sides of the box.

I1
I2
J1
J2

3. 4.
Now glue the long and short Attach the stripes to the
stripes together so they front and the back.
have a different front
and back color.

5.
Optional:
6.
Cut the front and back
Attach to mask.
stripes in half.
Done!

6/17 #SPRINGBREAKOUT
 4” (100mm)

44

43

45

40
40
42
45
42
Yellow

A
25

37
46
37
41

41

46

38

39

Glue Flaps

7/17 #SPRINGBREAKOUT
 31

27
15
33

32

43
17

16

25
8
21
22

38

29
30
Yellow

20

26

28

8/17 #SPRINGBREAKOUT
35

33

36
E
Ye
llo
w

30

34

9/17 #SPRINGBREAKOUT
 Punch holes for elastic band or string

39

F1
low
Yel
26

34
44

28
27

F 2
lo
w 31

Yel
35

Punch holes for elastic band or string

10/17 #SPRINGBREAKOUT
 6

2
18

13
C
19

14
24 Orange
23

9 10

11
12

12

11
10
9

19 14
18
13
23
24
4

20
15
22 8 16 17
21

11/17 #SPRINGBREAKOUT
 3
32

7
7
Orange

D
36

5
5

1
29

12/17 #SPRINGBREAKOUT
 Face option 1
print on thinner cardstock Ring
160 GSM/60 lb grey

Teeth
white

Forehead
black

Eye Eye
black black

Beak
black

Score all the folding lines before you cut out!

Color these elements yourself!

13/17 #SPRINGBREAKOUT
 Face option 2
print on thinner cardstock
160 GSM/60 lb

Teeth

Ring

Forehead

Eye Eye

Beak

Score all the folding lines before you cut out!

Fold and glue to face!

14/17 #SPRINGBREAKOUT
 Mohawk

#SPRINGBREAKOUT
print on thinner cardstock
1
160 GSM/60 lb
7

5 1 7
Purple
G
3

3
4 2 6

15/17
4
6

2
Purple

I1
 le
H2
Purp
Mohawk
print on thinner cardstock
160 GSM/60 lb

J1 Purple
H1
e l
Purp

16/17 #SPRINGBREAKOUT
Blue

I2

H4
Blue
Mohawk
print on thinner cardstock
160 GSM/60 lb

J2 Blue
H3
Blue

17/17 #SPRINGBREAKOUT