Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 49 views

    08 TIA-Portal Practical

    Uploaded by

    Ankit
    This document contains 3 sets (A, B, C) of practical questions for an NSQF level-6 final test in TIA. Each set contains a ladder logic programming question and asks the student to write a program, distribute marks for programming, hardware and simulation, and provides a total of 60 marks. Set A asks to program a lamp that glows for 15 seconds when a start switch is on and turns off when the start or reset switch is switched. Set B asks to program different lamps to turn on based on different sensor inputs and turn off all lamps using a memory bit. Set C asks to develop logic to sequentially control two motors that can be individually started and stopped, and turn off together using different stop switches

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    08 TIA-Portal Practical

    Uploaded by

    Ankit
    49 views3 pages
    This document contains 3 sets (A, B, C) of practical questions for an NSQF level-6 final test in TIA. Each set contains a ladder logic programming question and asks the student to write a program, distribute marks for programming, hardware and simulation, and provides a total of 60 marks. Set A asks to program a lamp that glows for 15 seconds when a start switch is on and turns off when the start or reset switch is switched. Set B asks to program different lamps to turn on based on different sensor inputs and turn off all lamps using a memory bit. Set C asks to develop logic to sequentially control two motors that can be individually started and stopped, and turn off together using different stop switches

    Original Title

    08 TIA-Portal practical

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains 3 sets (A, B, C) of practical questions for an NSQF level-6 final test in TIA. Each set contains a ladder logic programming question and asks the student to write a program, distribute marks for programming, hardware and simulation, and provides a total of 60 marks. Set A asks to program a lamp that glows for 15 seconds when a start switch is on and turns off when the start or reset switch is switched. Set B asks to program different lamps to turn on based on different sensor inputs and turn off all lamps using a memory bit. Set C asks to develop logic to sequentially control two motors that can be individually started and stopped, and turn off together using different stop switches

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    49 views3 pages

    08 TIA-Portal Practical

    Uploaded by

    Ankit
    This document contains 3 sets (A, B, C) of practical questions for an NSQF level-6 final test in TIA. Each set contains a ladder logic programming question and asks the student to write a program, distribute marks for programming, hardware and simulation, and provides a total of 60 marks. Set A asks to program a lamp that glows for 15 seconds when a start switch is on and turns off when the start or reset switch is switched. Set B asks to program different lamps to turn on based on different sensor inputs and turn off all lamps using a memory bit. Set C asks to develop logic to sequentially control two motors that can be individually started and stopped, and turn off together using different stop switches

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 3

    CENTRAL TOOL ROOM LUDHIANA

    NSQF (LEVEL-6) Final Test

    Course: ADMMA (____Batch) Max Marks:


    Subject: TIA Time : 1 hr.
    Name: Roll No :

    (Set A)
    Practical Question

    1. Write a program in ladder logic that a Lamp should glow when start switch S1 is made ON. Lamp should
    go off after 15 second automatically. Lamp should go OFF immediately when start switch S1 is made OFF.
    Lamp should go OFF immediately also when reset switch S2 is made ON even before the expiry of 15 sec
    time.

    MARKS DISTRIBUTION
    PROGRAMMIMG HARDWARE SIMULATION TOTAL
    20 20 20 60
    CENTRAL TOOL ROOM LUDHIANA
    NSQF (LEVEL-6) Final Test

    Course: ADMMA (___Batch) Max Marks:


    Subject: TIA Time : 1 hr.
    Name: Roll No :

    (Set B)
    Practical Question

    1. Write a program in ladder logic, When the sensor S1 is made ON the lamp B1 should glow When the
    sensor S2 is made ON the lamp B2 should glow When the sensor S3 is made ON the lamp B3 should glow
    When the sensor S4 is made ON the entire lamp should OFF. Hints: - Do it by use of a memory bit

    MARKS DISTRIBUTION
    PROGRAMMIMG HARDWARE SIMULATION TOTAL
    20 20 20 60
    CENTRAL TOOL ROOM LUDHIANA
    NSQF (LEVEL-6) Final Test

    Course: ADMMA (___Batch) Max Marks:


    Subject: TIA Time : 1 hr.
    Name: Roll No :

    (Set C)
    Practical Question

    1. Develop LAD logic for sequential control of two motors. Two motors (M1, M2) are to be
    separately started and stop from individual start stop push button stations. Motor M2 can only
    be started when Motor M1 starts. Once motor M2 starts it can be separately stopped but if the
    stop push button for motor M1 is pressed then both the motor M1& M2 gets OFF. While running
    Motor M1 & M2 both if a common stop switch is pressed it makes both the motor OFF.

    MARKS DISTRIBUTION
    PROGRAMMIMG HARDWARE SIMULATION TOTAL
    20 20 20 60

    You might also like