PRODUCTS

by NEWTEC

Rev.9 09/2018 www.newtec.eu

INTRODUCTION

For over 30 years Newtec has developed

satellite communication equipment and
technologies for broadcast, government
and defense, backhaul and trunking,
consumer and enterprise VSAT and mobility
markets. Our dedicated team meets
industry standards with efficient, scalable
and economical solutions. Through our
expertise and in cooperation with our
customers we make the world a safer, more
informed and connected place.

This product binder provides you with

an overview of the Satcom equipment,
platforms and OEM boards we bring to
the market and lets you quickly see the
advantages, applications and technologies
of each of our products.
 TABLE OF CONTENTS

MODEMS - MODULATORS - DEMODULATORS OUTDOOR UNIT PORTFOLIO

MDM2210 IP Satellite Modem 4 Outdoor Unit Portfolio 14
MDM2510 IP Satellite Modem 4 PLATFORMS
MDM3310 Satellite Modem 5 Newtec Dialog® 14
MDM5000 Satellite Modem 5 VALUE ADDED APPLICATIONS
MDM6000 Satellite Modem 6 Newtec Dialog® Mobility Manager 15
MDM6100 Broadcast Satellite Modem 6 SATLink Manager 15
M6100 Broadcast Satellite Modulator 7 File Exchange Manager 16
MCX7000 Multi-Carrier Satellite Gateway 7 Terminal Installation app 16
MDM9000 Satellite Modem 8 OEM BOARDS
HUBS OM6000 Satellite Modulator Board 17
Newtec Dialog HUB6501 1IF 8 OD6000 Satellite Demodulator Board 17
Newtec Dialog HUB6504 4IF 9 TECHNOLOGIES
Newtec Dialog HUB7208/7303 XIF Hub 9 Newtec Mx-DMA® 18
HUB6000 10 Newtec HighResCoding - HRCTM 18
REDUNDANCY SWITCHES Newtec Acceleration & Compression Technologies 19
USS0202 Universal Redundancy Switch 10 Newtec Clean Channel Technology® 19
USS0212 1+1 Redundancy Switch 11 Newtec Cross-Layer-Optimization 20
FREQUENCY CONVERTERS Newtec Equalink® 3 20
FRC0710 Upconverter 11 Newtec Point&Play® 21
FRC0720 Downconverter 12 Newtec FlexACM® 21
FRC0730 Up and Down Converter 12 Carrier ID (DVB-CID) 22
FRC0740 L-band Block Upconverter 13 Newtec Multistream 22
FRC0750 Active L-Band Combiner and Upconverter 13 DVB-S2X Standard 23
Channel Bonding 23
Newtec Datacasting Technology  24
Bandwidth Cancellation (BWC) 24

3
 MODEMS - MODULATORS - DEMODULATORS MODEMS - MODULATORS - DEMODULATORS

NEW NEW

MDM2210 MDM2510
IP SATELLITE MODEM IP SATELLITE MODEM
Description Advantages Description Advantages
The Newtec MDM2210 IP Satellite • Low initial investment per user, thanks to a cost-efficient The Newtec MDM2510 IP Satellite • HTS-ready through wideband DVB-S2X support up
Modem is a wideband DVB-S2X two- terminal and unique Point&Play easy-installation Modem is a two-way, high to 500 Mbaud in the forward link
capability • High throughput, up to 150/20Mbit/s
way, high throughput modem. throughput modem supporting a
• Easy to use multilingual web GUI for installation, • High service satisfaction ensured through true
It is combined with a range of wide range of services including
diagnostics and troubleshooting broadband experience
different antenna sizes and interactive • Adaptive return link based on different MF-TDMA Internet/Intranet access, Voice- • MF-TDMA and Newtec-patented Mx-DMA return
LNBs forming a cost-effective satellite modulations/coding and multiple channel bandwidths over-IP (VoIP), backhauling, technologies
terminal on the Newtec Dialog • High service satisfaction ensured through true contribution and multicasting. • Optimal modulation and bandwidth allocation while
platform. Its ease of installation broadband experience It is compatible with a variety of guaranteeing highest efficiency and availability with
and high performance modulation • HTS ready through wideband DVB-S2X support up to ODU configurations. Mx-DMA
techniques enable network operators 500 Mbaud in the forward link • Easy to use, multilingual web GUI for installation,
to offer IP broadband services in a • Optional Wi-Fi and advanced routing support diagnostics and troubleshooting
• Support for single cable outdoor units
cost-effective way.
• High throughput, up to 100/5 Mbps, 10 Mbps after
future Newtec Dialog upgrade
Ku Ka

75 cm 1m 1.2 m 75 cm 1m 1.2 m

0.5 W

0.8 W

2.0 W

2.0 W
quad

RELATED
Applications Applications
• Technologies
- Point&Play® RELATED
- FlexACM® (including ThiMM) • Technologies
- DVB-S2X - Point&Play®
- Acceleration & Compression - FlexACM®
INTERNET / SCADA POINT SCHOOL VOIP INTERNET / POINT FNG/SNG LIVE GOVERNMENT SME/
INTRANET OF SALE NETWORKS TELEPHONY - Mx-DMA® INTRANET OF SALE CONTRIBUTION & NGO ENTERPRISE
• Platforms - HRC™
- Newtec Dialog® - DVB-S2X
- Acceleration & Compression

• Platforms
- Newtec Dialog®
4
MODEMS - MODULATORS - DEMODULATORS MODEMS - MODULATORS - DEMODULATORS

NEW

MDM3310 MDM5010
SATELLITE MODEM SATELLITE MODEM
Description Advantages Description Advantages
The Newtec MDM3310 Satellite • HTS applications through wideband S2X support in the The Newtec MDM5010 Satellite modem is • High throughput upstream and downstream
Modem is a two-way, high forward link the very high throughput modem capable capabilities
• High throughput upstream and downstream capabilities • DVB-S2X forward
throughput DVB-S2X modem of handling more than 500 Mbps of traffic.
• SCPC, MF-TDMA and Mx-DMA return capability • SCPC, MF-TDMA and Mx-DMA return capability
supporting a wide range of IP With a symbol rate ranging from 1 up to 500
• The most optimal modulation and bandwidth allocation • The most optimal modulation and bandwidth
services, including Internet/ while guaranteeing the highest efficiency and availability Mbaud and coding from QPSK to 256APSK allocation while guaranteeing the highest efficiency
intranet access, VoIP, enterprise • Bolstered with Newtec’s technologies FlexACM, ThiMM, in the forward channel, it enables network and availability
connectivity, backbones for Point&Play, HRC, Mx-DMA operators to set-up almost any type and • Bolstered with Newtec’s technologies FlexACM,
backhauling, contribution and • Easy to use multilingual web GUI for installation, size of network on any available type of ThiMM, Point&Play, HRC, Mx-DMA
multicasting services. Its ease of diagnostics and troubleshooting satellite – for example, traditional FSS, next • Built-in TCP acceleration, GTP optimization/
installation and high performance generation High Performance Satellites, acceleration, compression, packet aggregation and
modulation techniques enable HTS. The Newtec MDM5010 Satellite encryption
• Easy to use multilingual web GUI for installation,
network operators to offer various Modem supports a wide range of IP Services
diagnostics and troubleshooting
bandwidth-intensive services in a including internet/intranet access, Voice over
cost-effective way. IP (VoIP), backbones for mobile backhauling
and trunking, fibre restoral/ backup services,
contribution and multicasting services.
The high spectral efficiency, high packet
and bit rate capability makes the MDM5010
a perfect fit for very bandwidth-intensive
services in the enterprise, backhauling,
offshore and maritime markets.

RELATED
• Technologies
Applications RELATED
Applications
- Point&Play® • Technologies
- FlexACM® (including ThiMM) - Mx-DMA®
- Mx-DMA® - DVB-S2X
- HRCTM - FlexACM® (including ThiMM)
- DVB-S2X - Point&Play®
FNG /SNG BACKBONE FIBER GOVERNMENT VOIP MOBILITY , VOIP 2G/3G/RURAL BACKBONE FNG /SNG
- Acceleration & Compression LIVE AND FILE CONNECTION RESTORATION & NGO TELEPHONY - HRCTM OFFSHORE TELEPHONY CELLULAR CONNECTIONS, LIVE AND FILE
CONTRIBUT ION & MARITIME (SIP, H.323, …) BACKHAULING FIBER CONTRIBUT ION
• Platforms • Platforms RESTORATION
- Newtec Dialog® - Newtec Dialog®

5
MODEMS - MODULATORS - DEMODULATORS MODEMS - MODULATORS - DEMODULATORS

MDM6000 MDM6100
SATELLITE MODEM BROADCAST SATELLITE MODEM
Description Advantages Description Advantages
• Support of the latest and most efficient DVB-S2X standard
The Newtec MDM6000 Satellite • Efficiency at the core The Newtec MDM6100 Broadcast
• Highest system reliability and service uptime through robust design
Modem is a versatile high • Optimal availability Satellite Modem is the next-
and industry leading redundancy solutions including TS payload
• Flexibility and scalability matching the market’s business generation DVB compliant modem
performance modem which allows stuffing detection
• Built-in bandwidth cancellation specifically designed for broadcast
service providers and government • Low total cost of ownership as a result of very high bandwidth
• Very granular licensing scheme for applications in low
operations to increase the amount applications. The modem supports efficiency technology options, and ease of monitoring and control
rate, medium rate, backhauling and high rate trunking
of services or the customer base the DVB-S2 and DVB-S2X, next to • Built-in support for opportunistic data insertion, via Multi Protocol
• Flexible on-board packet processing such as QoS,
within the same bandwidth. At the the legacy DVB-S and DVB-DSNG Encapsulation (MPE) encap/decapsulator
shaping, bridging and routing
standards in order to achieve • Easy integration with industry leading management systems (EMS/
same time it introduces ways to • Very high throughput and packet per second
barrier-breaking efficiency. The NMS/OSS)
reduce OPEX costs and increase • Support for DVB-S2 and DVB-S2X
• Safe investment as the platform supports advanced capabilities such
the profitability of their business at unit can act as a MPEG Transport
as proMPEG FEC at the inputs and outputs, built-in transport stream
maximum efficiency and optimum Stream modulator, demodulator
analyzer, ECM/EMM messages monitoring and DVB & NIT Carrier ID
availability. or modem. • Optional C-band or Ku-band outputs for compact earth station design
• BISS scrambling for contribution links
• Pay-as-you-grow flexible licensing scheme
• Future-proof design combining video and IP unicast and multicast
multiservice capabilities, supports transport of today´s and tomorrow´s
services
• Reduced adjacent channel interference for multi-carrier per
transponder constellations
RELATED
• Dedicated GUI for single stream and multistream applications
RELATED
• Products • Feature-based pricing and software upgrades
• Products
- HUB6000 Satellite Hub - M6100 Broadcast Satellite • 6 I/O configurable ASI ports
- USS02x2 Redundancy Switch Modulator • Provides better link margin with Equalink 3 pre-distortion
- FRC07x0 Frequency Converters - FRC07x0 Frequency Converters

Applications - USS0212 1+1 Redundancy Switch

- USS0202 Universal Switching System
Applications
• Technologies
- Clean Channel Technology®
- Equalink® 3 • Technologies
- DVB-S2X - Clean Channel Technology®
- Wideband provides up to 15% bandwidth
- FlexACM® efficiency gains on top of the DVB-S2 DIRECT-TO- DSNG BROADCAST BROADCAST EXCHANGE
3G/4G/LTE ISP FIBER ISP TELECOM WIMAX
- Bandwidth Cancellation standard HOME CONTRIBUTION DISTIRIBUTION NETWORKS
TRUNK RESTORATION SERVICES
- Equalink® 3 pre-distortion provides
up to 10% bandwidth gains, higher
QoS and geographic coverage
- DVB-S2X

6
 MODEMS - MODULATORS - DEMODULATORS MODEMS - MODULATORS - DEMODULATORS

M6100 MCX7000
BROADCAST SATELLITE MODULATOR MULTI-CARRIER SATELLITE GATEWAY
Description Advantages Description Advantages
The Newtec M6100 Broadcast • Support of the latest and most efficient DVB-S2X standard The Newtec MCX7000 Multi-Carrier • Very high bandwidth efficiency, ease of monitoring and
Satellite Modulator is a new • Highest system reliability and service uptime through robust Satellite Gateway brings density in control leads to low total cost of ownership
design and industry leading redundancy solutions including • Highest system reliability and service uptime through
generation DVB compliant hubs and terminals on top of satellite
TS payload stuffing detection robust design and industry leading redundancy solutions
modulator specifically designed link efficiency. This results in OPEX
• Low total cost of ownership as a result of very high bandwidth including seamless switching acc. SMPTE 2022-7 and
for broadcast applications. This efficiency technology options, and ease of monitoring and and CAPEX savings in a multitude single carrier switching in a multimodulator 1:1 MCX7000
MPEG Transport Stream modulator control of applications. Its density and the configuration
supports the updated DVB-S2 and • Built-in support for opportunistic data insertion, interoperable support of DVB-S2X gets its full value • Future-proof design combining video and IP unicast and
DVB-S2X, next to the legacy DVB-S with IRDs that support Multi Protocol Encapsulation (MPE) in distribution networks to towers or multicast multiservice capabilities, supports transport of
and DVB-DSNG standards in • Easy integration with industry leading management systems head-ends. It is also fit for broadcast today´s and tomorrow´s services
order to achieve barrier-breaking (EMS/NMS/OSS) contribution applications on standard • Configurable as triple demodulator or as 1 modulator
efficiency. • Safe investment as the platform supports advanced and HTS spot-beam transponders + 2 demodulators or as quadruple modulator
capabilities such as proMPEG FEC at the input, built-in • Channel Bonding modulation for efficient UHD-TV DTH
or for dense DTH uplink stations. In
transport stream analyzer, ECM/EMM messages monitoring transmissions
closed video distribution networks,
and DVB & NIT Carrier ID • BISS scrambling and de-scrambling for contribution links
• Optional C-band or Ku-band outputs for compact earth station AES encryption of the baseband • Provides a dense solution in a redundant configuration
design frames results in extra security on • Wideband up to 133 Mbaud
• BISS scrambling for contribution links physical layer level. • AES encryption and de-encryption of DVB-S2 Baseband
• Pay-as-you-grow flexible licensing scheme frames
RELATED • Future-proof design combining video and IP unicast and • Fully manageable over-the-air via an in-band channel
• Products multicast multiservice capabilities, supports transport of RELATED
- MDM6100 Broadcast Satellite • Products
today´s and tomorrow´s services
Modem (works together with - M6100 Broadcast Satellite
• Dedicated GUI for single stream and multistream applications Modulator
M6100 to perform the Equalink 3
pre-distortion calibration) • Feature-based pricing and software upgrades - MDM6100 Broadcast Satellite
- FRC07x0 Frequency Converters • Provides better link margin with Equalink 3 pre-distortion Modem
- FRC07x0 Frequency Converters
- USS0212 1+1 Redundancy Switch
- USS0202 Universal Switching Applications - USS0212 1+1 Redundancy Switch Applications
System - USS0202 Universal Switching
System
• Technologies
- Clean Channel Technology® • Technologies
provides up to 15% bandwidth - Clean Channel Technology®
efficiency gains on top of the DIRECT-TO- DSNG BROADCAST BROADCAST EXCHANGE
provides up to 15% bandwidth BROADCAST BROADCAST EXCHANGE DTH CLOSED VIDEO
HOME CONTRIBUTION DISTIRIBUTION NETWORKS efficiency gains on top of the DISTRIBUTION CONTRIBUTION NETWORK NETWORK DISTRIBUTION
DVB-S2 standard TO TOWERS NETWORK
- Equalink® 3 pre-distortion DVB-S2 standard
AND
provides up to 10% bandwidth - Equalink® 3 pre-distortion provides HEADENDS
gains, higher QoS and up to 10% bandwidth gains, higher
geographic coverage QoS and geographic coverage
- DVB-S2X - DVB-S2X
- Channel Bonding
7
MODEMS - MODULATORS - DEMODULATORS HUBS

MDM9000 NEWTEC DIALOG HUB6501

SATELLITE MODEM 1IF HUB
Description Advantages Description Advantages
The WGS certified (pending) MDM9000 Satellite • Efficiency at the core • Multiservice hub platform
The Newtec Dialog HUB6501 1IF
Modem is the versatile next generation modem • Optimal availability • Small networks
Hub is designed to specifically
• Flexibility and scalability for • Support for SCPC, MF-TDMA and Mx-DMA return links
optimized for a wide range of fixed and mobile address small and dedicated
successful operations • Hubs hosted at customer premises
government and defense applications over satellite. networks. It provides flexibility
• Dedicated intelligence gathering • One satellite network, up to 250 terminals
The MDM9000 modem is typically installed at both features to easily add high capacity • Up to 150 Mbps of satellite capacity
ends of a point-to-point satellite link or at the remote • WGS certified (pending) multicarrier demodulators which • Includes all traffic processing functionality
sites of a star network. The unit can act as a modulator, support SCPC, MF-TDMA and • Optional redundancy
demodulator or modem depending on the network Newtec’s patented Mx-DMA return • Low initial cost
configuration and integrates seamlessly with terrestrial link technologies. • The hub module easily integrates with the ‘IP backbone’
networks and equipment. The modem is in full router and the RF gateway up/downlink
compliance with the DVB-S2 and the recently released • Optional redundancy can provide better than 99.99%
DVB-S2X standards while being backward compatible availability
with Newtec S2 Extensions mode, all in order to • Including all traffic processing, like Quality of Service
(QoS) and congestion management, acceleration,
achieve barrier-breaking efficiency at maximum
compression and encryption
service availability. In receiver mode, the MDM9000
serves as demodulator with dedicated intelligence
gathering features.

RELATED
• Products
- MDM2210 IP Satellite Modem
- MDM2500 IP Satellite Modem
RELATED - MDM3100 IP Satellite Modem
• Products - MDM3300 Satellite Modem
- HUB6000 Satellite Hub - MDM3310 Satellite Modem
- MDM6100 Broadcast Satellite
Modem
Applications - MDM5000 Satellite Modem
- M6100 Broadcast Modulator Applications
- BWC0900 Bandwidth Canceller
- USS02x2 Redundancy Switch • Technologies
- FRC07x0 Frequency Converters - DVB-S2X
- Mx-DMA®
• Technologies - HRCTM
INTELLIGENCE GOVERNMENT MULTISERVICE GOVERNMENT CELLULAR CONSUMER MOBILITY ,
- DVB-S2 and DVB-S2X - FlexACM® (including ThiMM and
GATHERING & DEFENSE NETWORKS & DEFENSE BACKHAUL & ENTERPRISE OFFSHORE
- FlexACM® NoDE) & TRUNKING VSAT & MARITIME
- Bandwidth Cancellation - Equalink® 3
- Clean Channel Technology® - Clean Channel Technology®
- Cross-Layer-Optimization
- Acceleration & Compression

8
 HUBS HUBS

NEW

NEWTEC DIALOG HUB6504 NEWTEC DIALOG HUB7208/7303

4IF HUB XIF HUB
Description Advantages Description Advantages
The Newtec Dialog HUB6504 • Multiservice hub platform The Newtec XIF Hub is the solution • Highly flexible and scalable hub architecture
4IF Hub enables any network • Up to four satellite networks and 60,000 terminals for gateway deployments serving a • Optimized baseband density & flexibility with
• Support for SCPC, MF-TDMA and Mx-DMA return links baseband matrix
configuration, from single to multitude of beams, transponders
• Carrier grade reliability with built-in redundancy • Up to 500 Mbaud forward carriers
multiple service areas, one or more or satellites. The use of a baseband
• Low initial cost, pay-as-you-grow • Carrier grade reliability with built-in redundancy
satellites, different frequency bands, • The hub module easily integrates with the ‘IP backbone’ matrix brings N:M redundancy for • Support for SCPC, MF-TDMA and Mx-DMA return links
multiple transponders and High router and the RF gateway up/downlink up 32 multicarrier modulators and/ • Pay-as-you-grow
Throughput Satellites (HTS). The • Optional redundancy can provide better than 99.99% or demodulators in one rack. The
modularity gives service providers availability Newtec XIF Hub is designed for
agility to respond to their customer • Including all traffic processing, like QoS and congestion operators seeking high throughput
and market needs in a fast and cost- management, acceleration, compression and encryption through its 10 Gbps Ethernet
effective way. switching infrastructure. With support
for forward DVB-S2X carriers up
to 500 Mbaud, they can leverage
the high bandwidth transponders
provided by HTS satellites.

RELATED RELATED
• Products • Products
- MDM2210 IP Satellite Modem - MDM2210 IP Satellite Modem
- MDM2500 IP Satellite Modem - MDM2500 IP Satellite Modem
- MDM3100 IP Satellite Modem - MDM3100 IP Satellite Modem
- MDM3300 Satellite Modem - MDM3300 Satellite Modem
- MDM3310 Satellite Modem
- MDM5000 Satellite Modem
Applications - MDM3310 Satellite Modem
- MDM5000 Satellite Modem
Applications
- M6100 Broadcast Modulator - M6100 Broadcast Modulator

• Technologies • Technologies
- DVB-S2X - DVB-S2X
- Mx-DMA® MULTISERVICE GOVERNMENT CELLULAR CONSUMER MOBILITY , - Mx-DMA® MULTISERVICE GOVERNMENT CELLULAR CONSUMER MOBILITY ,
- HRCTM NETWORKS & DEFENSE BACKHAUL & ENTERPRISE OFFSHORE - HRCTM NETWORKS & DEFENSE BACKHAUL & ENTERPRISE OFFSHORE
- FlexACM® (including ThiMM and & TRUNKING VSAT & MARITIME - FlexACM® (including ThiMM and & TRUNKING VSAT & MARITIME
NoDE) NoDE)
- Equalink® 3 - Equalink® 3
- Clean Channel Technology® - Cross-Layer-Optimization
- Cross-Layer-Optimization - Acceleration & Compression
- Acceleration & Compression
9
 HUBS REDUNDANCY SWITCHES

HUB6000 USS0202
SATELLITE HUB UNIVERSAL REDUNDANCY SWITCH
Description Advantages Description Advantages
The high performance HUB6000 • Very high throughput and packets per second The USS0202 Universal • High reliability through the dual redundant power supply –
is the next generation satellite hub • Efficiency at the core Redundancy Switch is a state- Main & Extension unit
• Optimal availability • Increases service availability significantly thanks to the
designed for data applications of-the-art product designed
• Flexible business models automatic or manual operational mode, the automatic
over satellite in full compliance to provide a cost effective and
• Easy integration with terrestrial data networks switch back and the automatic memorization of the
with the updated DVB-S2 and • Pay-as-you-grow licensing scheme scalable 1+1 and N+1 protection configuration
DVB-S2X standards as well as • Versatile IP and satellite bandwidth management scheme for a wide variety of • Optimized switching time
Newtec S2 Extensions. The • Support for DVB-S2 and DVB-S2X equipment such as modulators, • Cost-effective solution through GbE logical switching
HUB6000 merges cutting edge • Advanced traffic shaping engine with CIR, PIR and class demodulators, modems • Future-proof solution thanks to its scalability from a 1+1 to a
modulation with the unique based QoS and converters. In complex 16+1 configuration
combination of traffic shaping • Layer 2 or Layer 3 operation configurations, it can operate • Easy setup and installation through the ability to copy the
and satellite segment bandwidth and control up to 36 switching full configuration from one device to another
• Flexible deployment and device hot replacement
management. The multicarrier modules, embedded in the main
• Easy to use, control and operate through its user-
demodulator unit inside the hub unit and into up to seven USS0203
configurable switching logic and the automatic switch back
integrates three demodulators in extension units. • Easy integration into NMS systems through SNMP
one unit which reduces the total • Highly compact
cost of ownership.

RELATED
• Products
- MDM6000 Satellite Modem
- FRC07X0 Frequency Converters

Applications Applications
- HUB650x Newtec Dialog Hub
- HUB7208/7303 XIF
- SATLink Manager
RELATED
• Technologies • Products
- FlexACM® (including ThiMM and - M6100 Broadcast Satellite
NoDE) Modulator
- DVB-S2X 3G/4G/LTE ISP FIBER TELECOM ISP WIMAX - MDM6100 Broadcast Satellite REDUNDANCY REDUNDANCY
- Equalink® 3 TRUNK RESTORATION SERVICES Modem SETUPS IN SETUPS IN
- MDM6000 Satellite Modem UPLINKS RECEIVE
- Carrier ID STATIONS
- Clean Channel Technology® - MCX7000 Multi-Carrier Satellite
- Cross-Layer-Optimization Gateway
- USS0212 1+1 Redundancy Switch

10
 REDUNDANCY SWITCHES FREQUENCY CONVERTER

USS0212 FRC0710
1+1 REDUNDANCY SWITCH UPCONVERTER
Description Advantages Description Advantages
The USS0212 1+1 Redundancy • High reliability through the dual redundant power supply High performance agile IF to • Perfect solution for a wide range of transmissions ranging
Switch is a state-of-the-art • Increases service availability significantly thanks to the L-band upconverter with optional from very small carriers to full transponder applications
automatic or manual operational mode, the automatic • Easy to operate and monitor
product designed to provide a RF upconversion designed for a
switch back and the automatic memorisation of the • Ultra fine L-band frequency resolution
cost-effective and scalable 1+1 wide range of broadcast, telco
configuration • Very high frequency stability
protection scheme for modulators, • Cost-effective solution through GbE logical switching and IP satellite applications. It • Very low spurious characteristics
demodulators and modems. • Easy setup and installation through the ability to copy the offers some advanced and unique • High linearity over the entire bandwidth
full configuration from one device to another features such as a wide linear gain • Switchable spectrum inversion
• Easy to use, control and operate through its user- range over the entire bandwidth
configurable switching logic and the automatic switch back combined with a very high
• Easy integration into NMS systems through Monitoring & frequency stability.
Control via SNMP
• Highly compact

Applications Applications
RELATED RELATED
• Products • Products
- M6100 Broadcast Satellite - FRC0720 Downconverter
Modulator - FRC0740 L-band Block Upconverter
- MDM6100 Broadcast Satellite REDUNDANCY REDUNDANCY - FRC0750 Active L-band Combiner DIRECT-TO- BROADCAST TELCO & VSAT VSAT HUBS
Modem SETUPS IN SETUPS IN and Upconverter HOME PRIMARY HUBS
- MDM6000 Satellite Modem UPLINKS RECEIVE - USS0202 Universal Redundancy DISTRIBUTION TRUNKING
STATIONS SATELLITE
- MCX7000 Multi-Carrier Satellite Switch INFRASTRUCTURE
Gateway

11
FREQUENCY CONVERTER FREQUENCY CONVERTER

FRC0720 FRC0730
DOWNCONVERTER UP- AND DOWNCONVERTER
Description Advantages Description Advantages
High performance agile L-band • Highest signal quality High performance agile up- and • Perfect solution for a wide range of transmissions ranging
to IF downconverter designed for • High flexibility downconverter designed for a from very small carriers to full transponder applications
• High gain • Easy to operate and monitor
a wide range of broadcast, telco wide range of broadcast, telco
• Ultra fine L-band frequency resolution • Highest signal quality
and IP satellite applications. It and IP satellite applications. It
• Very high frequency stability • Extensive coverage of transponder frequencies through
offers some advanced and unique • High linearity over the entire bandwidth offers some advanced and unique optional RF upconverters
features such as a calibrated wide • Low noise figure features such as a calibrated wide • High flexibility
linear gain range over the entire • Switchable spectrum inversion linear gain range over the entire • Ultra fine frequency resolution
bandwidth combined with a very bandwidth combined with a very • Very high frequency stability
high frequency stability. high frequency stability. • Very low spurious characteristics
• High linearity over the entire bandwidth

Applications Applications
RELATED
RELATED • Products
• Products - FRC0740 L-band Block Upconverter
- FRC0710 Upconverter - FRC0750 Active L-band Combiner
- FRC0740 L-band Block Upconverter and Upconverter
- FRC0750 Active L-band Combiner DIRECT-TO- BROADCAST TELCO & VSAT VSAT HUBS - USS0202 Universal Redundancy DIRECT-TO- BROADCAST TELCO & VSAT VSAT HUBS
and Upconverter HOME PRIMARY HUBS Switch HOME PRIMARY HUBS
- USS0202 Universal Redundancy DISTRIBUTION TRUNKING DISTRIBUTION TRUNKING
SATELLITE SATELLITE
Switch INFRASTRUCTURE INFRASTRUCTURE

12
FREQUENCY CONVERTER FREQUENCY CONVERTER

FRC0740 FRC0750
L-BAND BLOCK UPCONVERTER ACTIVE L-BAND COMBINER & UPCONVERTER
Description Advantages Description Advantages
High performance frequency block • Easy to operate and monitor The FRC0750 Active L-band • Advanced monitoring and control
upconverter designed for a wide • Very wide linear gain range Combiner and Block Upconverter • Each input is switchable and gain adjustable
• Very good gain flatness over the entire bandwidth • Optional upconversion to C, Ku or DBS-band
range of broadcast, telco and IP is primarily designed to bring
• Very high frequency stability
satellite applications. The FRC0740 together several L-band carriers
• Very low spurious characteristics
translates frequencies from L-band in a single satellite channel. To
to a wide range of RF frequencies equalize the level of the incoming
such as C-, Ku- and DBS-band. signals, each input has its own
The FRC0740 guarantees the best amplifier/ attenuator. The FRC0750
signal quality thanks to a very high can also be used as an active
frequency stability and very low switching device for signal routing
spurious characteristics. purposes or redundancy switching
operations.

Applications Applications
RELATED RELATED
• Products • Products
- M6100 Broadcast Satellite - MDM6000 Satellite Modem
Modulator - MDM6100 Broadcast Satellite
- MDM6100 Broadcast Satellite Modem
Modem DIRECT-TO- BROADCAST TELCO & VSAT VSAT HUBS - M6100 Broadcast Satellite DIRECT-TO- BROADCAST TELCO & VSAT VSAT HUBS
- MDM6000 Satellite Modem HOME PRIMARY HUBS Modulator HOME PRIMARY HUBS
DISTRIBUTION TRUNKING - FRC0710 Upconverter DISTRIBUTION TRUNKING
- FRC0710 Upconverter
SATELLITE SATELLITE
- FRC0720 Downconverter INFRASTRUCTURE - FRC0720 Downconverter INFRASTRUCTURE
- FRC0730 Up and Down Converter - FRC0730 Up and Down Converter
- USS0202 Universal Redundancy - USS0202 Universal Redundancy
Switch Switch
13
 OUTDOOR UNIT PORTFOLIO PLATFORMS

OUTDOOR UNIT PORTFOLIO NEWTEC DIALOG®

MULTISERVICE PLATFORM
Description Advantages Description Advantages
The Newtec modems can be • High efficiency output power Newtec Dialog is a single-service • Supporting wide range of applications
combined with a performant ODU • Low cost and low power consumption and multiservice VSAT platform and services on a single platform
• Ease of installation • Up to 15% efficiency improvement with Newtec’s
portfolio. The BUCs and LNBs have that allows operators and service
Clean Channel Technology
been selected to provide optimal providers to build and adapt their
• 50% bandwidth savings with Newtec
performance. infrastructure and satellite networking Mx-DMA return link technology
according to business or missions at • OSS/BSS integration using extensive open API
hand. Based on the cornerstones of • Easy to use and fast network roll-out
Ku Ka Standard C
flexibility, scalability and efficiency, • Modem portfolio, supporting different return links
1m 1.2 m 98 cm 1.2 m 1.8 m 2.4 m
the Newtec Dialog platform gives the • Pay-as-you-grow modularity
2W operator the power to offer a variety • Maximum availability and link robustness
of services on a single platform. • Future proof
3W
• Extensible with Newtec’s and 3rd party VAS applications
4W
• Support for DVB-S2 and DVB-S2X
5W
RELATED
• Products
6W - MDM2210 Satellite Modem
- MDM2500 IP Satellite Modem
- MDM3100 IP Satellite Modem
- MDM3300 Satellite Modem
- MDM3310 Satellite Modem
- MDM5000 Satellite Modem
- Newtec Dialog HUB6501
1IF Hub
- Newtec DIalog HUB6504
4IF Hub
- Newtec Dialog HUB7208/7303 XIF
Hub
Applications - File Exchange Manager
- SATLink Manager
Applications
RELATED
• Products: · FNG/SNG · TRUNKING
- MDM2500 IP Satellite Modem • Technologies · CONTRIBUTION · FIBER RESTORATION
- DVB-S2X · DISTRIBUTION · GOVERNMENT NETWORKS
- MDM3100 IP Satellite Modem
· DIRECT-TO-HOME · ISR & BORDER SECURITY
- MDM3300 Satellite Modem - Clean Channel Technology® · CONSUMER/SOHO · DISASTER RECOVERY/NGO
- MDM3310 Satellite Modem 2G/3G/RURAL PRIVATE INTERNET / VOIP GOVERNMENT - HRCTM · SCADA · MWR NETWORKS
CELLULAR NETWORKS INTRANET TELEPHONY & NGO - Mx-DMA® · ENTERPRISE/SME · OFFSHORE, OIL & GAS
BACKHAULING ACCESS · ENERGY · MINING
- FlexACM®
· CELLULAR BACKHAUL · MARITIME
- Cross-Layer-Optimization · BACKHAUL · AVIATION
- Equalink®
- Point&Play®
- Acceleration & Compression
14
 VALUE ADDED APPLICATIONS VALUE ADDED APPLICATIONS

NEWTEC DIALOG® MOBILITY MANAGER SATLINK MANAGER

Description Advantages Description Advantages

The Newtec Dialog® Mobility • Mobile network operators can customize beam switching Newtec’s SATLink Manager • Multiple data + broadcast services support on single platform
Manager is a turnkey solution logic to match their business needs and priorities. software module allows • Versatile modem portfolio support
• Powerful scripting capabilities allow external factors such as • Possibility to integrate with integrated NMS, to allow support
for managing mobility networks. broadcasters and telco operators
weather, vessel itineraries and customer preferences to be of flexible transmission workflows and hybrid connectivity
The Mobility Manager switching to efficiently manage the
considered. • Scales from small to large networks
policies are configured through • Streamlined service activation and configuration of both transmission resources and • Support for capacity pools over multiple transponders,
a powerful rules-based engine. mobile and fixed satellite services. capacity, and guaranteeing error- frequency bands and satellites
In addition to standard location- free link setups by automation of • Scales with the number of supported services and
based logic, the Mobility Manager satellite ground equipment. throughputs
rules can also incorporate other • Low upfront CAPEX requirements, invest as your business
factors such as network load, grows
beam cost and real-time terminal • Support for highly efficient modulation schemes, such as
DVB-S2 and DVB-S2X
performance. The multilayer map-
• Optimization of bandwidth allocation through optimal
based GUI enables intuitive global
MODCOD selection and pooled capacity support
network management. • FlexACM support

RELATED RELATED
• Products
- MDM2510 Applications • Products
- MDM6000 Satellite Modem Applications
- MDM3310 - MDM6100 Satellite Modem
- MDM5000 - MCX7000 Multi-Carrier Satellite
Gateway
• Platforms - HUB6000 Satellite Hub
- Newtec Dialog® - File Exchange Manager
MARITIME AVIATION COMMUNICATIONS FNG/SNG CONTRIBUTION FIBER BACKHAUL BUSINESS
ON-THE-MOVE RESTORATION CONTINUITY
• Platforms
- Newtec Dialog®

15
 VALUE ADDED APPLICATIONS VALUE ADDED APPLICATIONS

FILE EXCHANGE MANAGER TERMINAL INSTALLATION APP

Description Advantages Description Advantages

The File Exchange Manager • Highly reliable and guaranteed file reception The Terminal Installation App is an • Accurate terminal installations with low adjacent
application is a versatile solution • Encrypted transmission to ensure content privacy installation tool that satisfies the satellite interference
• Supporting wide range of applications and services on a • Highest service satisfaction through optimal
for the non-linear contribution, increasing demand for efficient,
single platform signal quality
distribution and exchange of accurate terminal installations with
• Interoperability with any transport system: Newtec Dialog, • High installation success rate
file-based digital assets. It provides HUB6000, 3rd party SCPC/VSAT system or terrestrial/hybrid low adjacent satellite interference. It is • Lower installation costs
bandwidth-efficient, reliable IP network an element of the Newtec Point&Play • Android & iOS support
and secure data transmission • Versatile platform support technology.
over satellite as well as hybrid IP • Possibility to integrate with integrated NMS, to allow support The Terminal Installation App is
networks. of flexible transmission workflows and hybrid connectivity a smartphone app that connects
• Scales from small to large networks to the modem through Wi-Fi.
• Scales with the number of supported services and It supports a number of key
throughputs
• Satellite-bandwidth efficient file exchange
functionalities required during an
Point&Play
antenna installation: Site acceptance, by NEWTEC
• Full utilization of available satellite capacity
• Fully automated file workflows polarization adjustment, fully aided
• Easy self-deployment and operation antenna pointing, storm testing and
more. A terminal installation kit is
available containing all required tools
to enjoy the full functionality of the
app.

RELATED RELATED

Applications Applications
• Products: • Products:
- HUB6000 Satellite Hub - MDM2210
- SATLink Manager - MDM3310

• Platforms • Technologies
- Newtec Dialog® - Point&Play®

SNG/FNG FIXED DIGITAL MWR INTERNET / SCADA POINT SCHOOL VOIP

BROADCAST SIGNAGE • Platforms INTRANET OF SALE NETWORKS TELEPHONY
CONTRIBUTION - Newtec Dialog®
& EXCHANGE

16
OEM BOARDS OEM BOARDS

OM6000 OD6000
SATELLITE MODULATOR BOARD SATELLITE DEMODULATOR BOARD
Description Advantages Description Advantages
The OM6000 Satellite Modulator • Best-in-class spectral purity The OD6000 Satellite Demodulator • High-end DVB-S2X demodulator with best ES/N0 threshold
Board provides the OEM integrator • On-board reference Board provides the OEM integrator performance
• IF or L-band output selectable by software command • DVB-S2X, DVB-S2 and DVB-DSNG/S standard compliant
a smooth upgrade path to the a smooth upgrade path to the DVB-
• RF Carrier ID compliant • 4 x L-band input selectable by software command
DVB-S2X standard starting as a S2X standard starting as a drop-in
• Support for all Newtec S2 Extensions modulation schemes • LNB power and control
drop-in replacement for current and DVB-S, DVB-DSNG, DVB-S2 and DVB-S2X standards replacement for current functionality • Transport Stream or DVB-S2(X) BaseBand frame output
functionality (Form, Fit and Function • Up to 72 Mbaud (Form, Fit and Function (FFF) backward options
(FFF) backward compatible compatible with NTC/7044) and • Support of Multistream and VCM operation
with NTC/7029, NTC/7039 and moving towards Newtec state of the art • Up to 60 Mbaud and 190 Mbit/s
NTC/7139) and moving towards technology features.
Newtec state of the art technology
features.

RELATED

Applications Applications
• Products:
RELATED - OM6000 OEM Satellite Modulator
Compliant with the most recent Board
commercially available IRDs. - M6100 Satellite Modulator
- MCX7000 Multi-Carrier Satellite
Gateway

BROADCAST DSNG DIGITAL TV BROADCAST BROADCAST DSNG DATA DATA

CONTRIBUTION PRIMARY BROADCAST MONITORING
& EXCHANGE DISTRIBUTION

17
TECHNOLOGIES TECHNOLOGIES

NEWTEC MX-DMA® NEWTEC HIGHRESCODING - HRCTM

SEAMLESS DYNAMIC BANDWIDTH HIGHLY EFFICIENT RETURN WAVEFORM
ALLOCATION AT SCPC EFFICIENCY
Description What Does It Do? Description What Does It Do?
A patented efficient and The Mx-DMA return technology adjusts the frequency plan HRC is the high-efficiency/ HRC maximizes the amount of bits that can be transmitted through
dynamic multiple-access transmission parameters for every terminal in the satellite network. low-latency modulation and a given satellite capacity. Its wide range of MODCODs provides the
scheme which enables Mx-DMA provides the efficiency and performance of SCPC with coding scheme that has been means to do this under varying satellite link conditions. The carrier
operators to share satellite the dynamic bandwidth allocation capabilities of MF-TDMA. Mx- designed for Mx-DMA. It sizing gives fine granularity and high range of traffic rates while the
capacity over a group of DMA assigns dedicated SCPC return carriers to each terminal, but increases throughput or saves short block code minimizes the delay and jitter on the traffic.
satellite terminals transmitting dynamically adjusts the symbol rate, MODCOD, power level and bandwidth in a satellite link.
to a central location. center frequency, every second, based on demand and weather HRC is a synchronous modulation and coding scheme, developed
conditions. by Newtec, specifically for MX-DMA. By synchronizing framing
across terminals, HRC allows MX-DMA carrier plan updates to be
completely seamless, with no packet loss or jitter.
Applications
HRC is fully adaptive, with 50 MODCODs, from VLSNR up to 32APSK.
Both fixed rate and variable rate applications, ranging from as low
as 32 kbps to 75 Mbps. The VLSNR MODCODs provide support
for small antennas and mobile terminals. Applications
Low-to-medium rate Satcom applications which are sensitive
Advantages to latency, jitter and variable bandwidth conditions. The VLSNR
MODCODs provide support for small antennas and mobile terminals.
• Eliminates the difficult choice of having to select either
MF-TDMA or SCPC
• Maximum return efficiencies Advantages
• Dynamic bandwidth allocation on the fly
Gain •
•
Low jitter and delay
Seamless operation with no packet loss
Gain •
•
A level of efficiency comparable to DVB-S2
Optimized for low and medium rate traffic
Compared to SCPC DVB-S2 • Operators no longer need to dimension the return carrier plan HRC provides a level of efficiency • Synchronous framing across terminals,
with 20% roll-off, it provides 50% comparable to DVB-S2 short frame for seamless carrier plan updates
• Rain margin can be managed per network, instead of per
bandwidth savings or doubles the with a 5% roll-off factor while the
carrier. Mx-DMA dynamically allocates capacity to carriers that • Small block size for
number of customers per MHz.
Compared to MF-TDMA 4CPM, need it
block size is five times smaller than
DVB-S2 short frames. minimum latency HighRes
it also provides 50% bandwidth
savings. Mx-DMA •
•
Low jitter and delay
High MODCOD granularity
Coding
by NEWTEC by NEWTEC

18
TECHNOLOGIES TECHNOLOGIES

NEWTEC ACCELERATION & NEWTEC CLEAN CHANNEL TECHNOLOGY®

COMPRESSION TECHNOLOGIES IMPROVING DVB-S2 EFFICIENCY WITH
IMPROVES THE USER EXPERIENCE OF SMALL ROLL-OFFS AND ADVANCED
INTERNET OR ENTERPRISE APPLICATIONS FILTERING TECHNOLOGY
Description What Does it Do? Description What Does it Do?
A combined set of traffic Acceleration improves the user experience of Internet or A combination of improved Improves satellite efficiency by up to 15% when compared
enhancement technologies enterprise applications while increasing satellite bandwidth roll-offs (5%, 10%, 15%) for to the DVB-S2 standard and ensures the modulator output
which speed up underlying efficiency at the same time by compressing the data sent over DVB-S2 and advanced filtering spectral shape is better than competition (side lobes 60 dB
communication protocols. satellite. technologies to allow optimal below carrier level).
carrier spacing.

Applications Applications
Trunking, Internet access and broadband VSAT applications. All multiple-carrier per transponder scenarios. Also single-
carrier per transponder in case the service provider or network

Advantages operator needs to optimize (read: increase) the carrier size.

• Improves the user experience of Internet and enterprise Advantages

applications
• Full and instant usage of the available satellite capacity • Do more with available bandwidth or cut OPEX costs
• Increase of download speed up to the maximum possible • Advanced filter technology
throughput • Upgrade available on existing Newtec DVB-S2 equipment
• Bandwidth savings of up to 20% on the forward and up to • Available as option on new equipment
90% on the return link

Gain Gain
Bandwidth savings of up to 20% Increases efficiency by up to 15%.
on the forward and up to 90% on
the return link.

Acceleration & Clean Channel

Compression Technology
by NEWTEC by NEWTEC

19
 TECHNOLOGIES TECHNOLOGIES

NEWTEC CROSS-LAYER-OPTIMIZATION NEWTEC EQUALINK® 3

AUTOMATED END-TO-END OPTIMIZATION PRE-DISTORTION COMPENSATING FILTER &
TECHNOLOGY BETWEEN THE RF AND AMPLIFIER EFFECTS
THE IP LAYERS
Description What Does It Do? Description What Does It Do?
In Cross-Layer-Optimization In an environment of variable satellite IP bandwidth, Cross- A revolutionary linear and Mitigates linear and non-linear distortion effects. The latest
two-way interactions between Layer-Optimization continuously fills the available satellite non-linear pre-distortion Equalink version (Equalink 3) can also provide significant gain
the RF, physical layer and the capacity, while following QoS rules, and avoids packet drops technology (implemented in for Direct-to-Home (DTH) applications.
network / IP components are by controlling the rate at which end-user applications send the modulator).
data in real-time.
Applications
exploited to tailor available
resources to match demand
more closely. It is part of a
wider traffic shaping process
Applications All single-carrier per transponder scenarios. In particular, DTH
that ensures QoS and carriers, professional distribution carriers and VSAT outbound
Any satellite IP communication is applicable. carriers.
prioritization of applications
and users, assuring maximum
availability and usage of the Advantages Advantages
network.
• Full use of available satellite capacity • Dramatically increases link margin of set-top boxes
• Maximized QoE • Up to 15% more throughput in DVB-S2 8PSK
• Automated calibration process, using Newtec demodulators
to measure distortion and optimize equalization

Gain Gain
Cross-Layer-Optimization allows For DTH applications: Additional
operators to fully use the available data traffic of up to 15% in the same
satellite capacity while still offering satellite capacity or a link margin
flexible SLAs depending on the
different customer requirements. Cross-Layer- improvement of up to 0.6dB.
For professional applications: Similar
The shortened response times and
reduced file transfer durations also
Optimization efficiency gains and up to 4dB link
margin improvement. Equalink
maximize the end-user QoE. by NEWTEC by NEWTEC

20
TECHNOLOGIES TECHNOLOGIES

NEWTEC POINT&PLAY® NEWTEC FLEXACM®

EASY AND ACCURATE END-TO-END SOLUTION OPTIMIZING
ANTENNA INSTALLATION SATELLITE CHANNELS SUFFERING FROM
VARIABLE LINK CONDITIONS
Description What Does It Do? Description What Does It Do?
An innovative and easy-to- Point&Play enables the installer (be it a professional installer FlexACM is the innovative Newtec’s unique and market-proven end-to-end solution
use self-installation solution or the end-user) to easily position the antenna correctly by and award-winning solution combines a set of technologies, such as ACM, Thin Margin
for Newtec VSAT terminals identifying the satellite and providing feedback on both signal by Newtec for efficient Manager (ThiMM), Noise and Distortion Estimation (NoDE)
which enables the end-user to quality and lock. satellite communications. and predictive tooling on upcoming variation, to bring the
accurately position the antenna The technology doubles satellite link to full efficiency.
towards the correct satellite
Applications throughput in satellite
without any support from
professionally trained satellite
networks that suffer from
variable link conditions both in
Applications
Pointing of Newtec Outdoor Units (ODUs), in combination with
installers. the forward and return satellite
Newtec VSAT modems, such as the MDM2000 and MDM3000 Any IP related application over satellite suffering from variable
channel. At the same time
series modems. link conditions due to the nature of the satellite (inclined orbit
maximum service availability
satellite), frequency band (Ka, Ku) or interference (rain fade,
can be achieved in any fading
Advantages
sun, shadowing effects).
condition (inclined orbit,
weather, dust, interference)
• Lowers the operational cost to keep mission-critical Advantages
• Differentiates and improves the competitiveness of the communications running at all
service provider times. • Doubles throughput
• Increases market penetration by creating more distribution • Optimal availability
channels • Cuts OPEX costs
• Reduces risk of interference • Suitable for inclined orbit satellite operations

Gain Gain
• End-to-end efficiency
• Proven Return on Investment (RoI)
Point&Play enables accurate pointing The gain of FlexACM can range from • Accommodates a wide range of terminal sizes and business
for non-skilled installers or end-users. 30% to 50% depending on the type of models on the same network
traffic and the satellite link conditions. • Proven technology with a large installed base

Point&Play FlexACM
by NEWTEC by NEWTEC

21
TECHNOLOGIES TECHNOLOGIES

CARRIER ID (DVB-CID) NEWTEC MULTISTREAM

IDENTIFIES THE SOURCE OF AN ALLOWS USERS TO AGGREGATE A NUMBER
INTERFERING CARRIER OF INDEPENDENT TRANSPORT STREAMS OR
IP STREAMS INTO ONE SATELLITE CARRIER
Description What Does It Do? Description What Does It Do?
The DVB standard It allows satellite operators and end-users to identify the Multistream is a main It allows users to aggregate a number of independent transport
implementation of Carrier source of an interfering carrier. advantage of the DVB-S2 and streams or IP streams into one satellite carrier in a fully transparent
ID (DVB-CID) is a signal DVB-S2X standard. manner, maintaining the integrity of the original content.
embedded into a video or data
Applications
transmission path to correctly
identify a carrier when it is
Applications
Any broadcast or data transmission application.
causing interference in the
Primary Distribution of Digital Terrestrial TV (DTT) and Mobile TV
satellite network.
Advantages
over satellite.
DSNG contributions where one or more video channels are
combined with IP based services.
• Gain of time, effort and money
• Identification of the source of an interfering carrier
• Reduce downtime due to interference Advantages
• No need for re-multiplexing at the towers
• 1-4 multiplexes distribution with only 1 Receiver
(e.g. compared with 4 IRDs!)
• Less satellite bandwidth needed compared with DVB-S
• Distribution of multiple services (terrestrial TV, mobile TV, radio
and IP) in a single carrier

Gain Gain
• Ability to saturate the transponder and gain up to 12%
bandwidth on top of the gain brought by DVB-S2
The gain of Carrier ID is an 12% bandwidth on top of the gain • Single Frequency Network (SFN) compliant
operational gain for satellite and brought by DVB-S2. • Lower number of frequencies necessary
network operators; a lot of time, • Fully interoperable, transparent and compliant with the DVB-S2
effort and money are spent trying and DVB-S2X standard
to identify interfering carriers (of
which 90% is unintentional). Being
able to rapidly pinpoint the source
of the interferer will save a lot of Carrier ID Multistream
work. by NEWTEC by NEWTEC

22
TECHNOLOGIES TECHNOLOGIES

DVB-S2X STANDARD CHANNEL BONDING

NEW DVB-STANDARD ON BOARD FOR EFFICIENT UHD TRANSMISSIONS
NEWTEC PRODUCTS

Description What Does It Do? Description What Does It Do?

The DVB-S2X waveform is DVB-S2X offers improved performance and features compared Channel Bonding for TS It allows for a large TS to be carried in parallel over 2 or 3
the DVB and ETSI approved to DVB-S2 for professional applications such as contribution, transmissions according to transponders.
standard which was launched digital satellite news gathering, DTH, VSAT, trunking, cellular the DVB-S2X standard splits a

Applications
in March 2014 as a successor backhaul and mobility. The technologies implemented in DVB- Transport Stream in 2 or 3 parts
to the DVB-S2 standard. S2X range from lower roll-offs and higher modulation up to for parallel transmission over
256APSK to adding higher granularity, increasing the standard satellite. The receive part then
from 28 to 116 MODCODs. 4k and 8k UHD- Direct-to-Home (DTH) bouquets
recomposes the original TS.

Applications Advantages
The applications that will adapt quickly to the DVB-S2X • The efficiency gain of statistical multiplexing on 7 channels is
standard are mainly trunking, broadcast contribution and typically 20%.
exchange, backhauling and professional IP access networks,
as well as applications within the government and defense
market (ISR, MWR, disaster recovery). These are applications
that typically require higher throughput or need better
margins to remain profitable.

Advantages
Gain • Optimized for HTS Gain
The efficiency technologies contributed • Smaller roll-offs (5%) The statistical multiplexing gain of 7
by Newtec to the new DVB standard • Advanced filtering UHD channels can only be obtained
boost the satellite link up to 20% in DTH
• Increased granularity in MODCODs through Channel Bonding, as the bit
networks and 51% in other professional rate exceeds what is available in a single
applications when compared to • Higher modulation schemes
Ku-band Transponder Equivalent (TPE)
DVB-S2. When adding wideband to the of up to 256APSK
of 36 MHz.
equation, an extra 20% can be added to • Wideband support
the total. These gains already exceed the of up to 133/500 Mbaud
results by proprietary systems available
on the market today.

23
TECHNOLOGIES TECHNOLOGIES

NEWTEC DATACASTING TECHNOLOGY BANDWIDTH CANCELLATION (BWC)

EFFICIENT DISTRIBUTION TECHNOLOGY UNRIVALLED CAPACITY GAIN THROUGH
FOR CONTENT AND MEDIA FULL DIGITAL PROCESSING

Description What Does It Do? Description What Does It Do?

Newtec datacasting technology The Newtec Multicast distribution platform provides a reliable Bandwidth Cancellation (BWC) At the receive side, the cancellation mechanism will cancel
(Multicast) allows the efficient distribution of files, directory structures and data streams for is a technology which allows out the modem’s own uplink signal in order to be able to
distribution of content and various applications. Multicast allows content to be distributed transmission of two carriers demodulate the desired carrier.
media towards single (Unicast) to a large number of recipients with only one single into the same leased satellite
transmission. The reliability of the data/multicasting service is
or multiple customers at the
same time in an efficient way enhanced by the software’s partial retransmission capabilities.
bandwidth.
Applications
over a satellite or terrestrial
Bandwidth Cancellation can be used in any point-to-point
network.
Applications application, with the main usage in trunks and backhaul
circuits. It can also be used to cancel the forward carrier in
The Newtec Multicast technology can be used over a wide certain point-to-multipoint applications.
range of unidirectional and bidirectional communication
networks such as satellite connections, cable TV networks,
xDSL and Internet. This includes media exchange services for Advantages
ISR or dissemination of meteorological data.
• Fast synchronization
• Easy operation and monitoring
• Highest spectral efficiency

Gain Gain
Advantages
Multicasting and exchanging content A gain of up to 30% in space capacity
towards remote sites and ships with can be achieved for symmetrical
Newtec’s Datacasting Software will links. When an existing link is
immediately result in important
efficiency and OPEX gains.
• High transmission reliability
• High bandwidth efficiency
bandwidth limited (not using all
available transponder power of Bandwidth
• Reduced channel cost Multicast the leased bandwidth) gains of up
to 100% are possible. This saving Cancellation
• Content protection by NEWTEC enables considerable OPEX savings by NEWTEC
• High degree of automation or deployment expansion by adding
services within the same available
bandwidth.
24
NOTES NOTES

25
NOTES NOTES

26
NOTES NOTES

27
 SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

More Information:

Send a mail to: sales@newtec.eu

Visit our website: www.newtec.eu

Contact us:
Newtec
Newtec Cy N.V. Europe
Newtec
Laarstraat 5 North America Newtec
B-9100 Sint-Niklaas China
Belgium Newtec
Tel: +32 3 780 65 00 MENA
Fax: +32 3 780 65 49
Newtec
Asia-Pacific
Follow us:
Newtec
South America
Twitter.com/Newtec_Satcom

in Linkedin.com/company/newtec

You Youtube.com/NewtecSatcom
Tube
Europe North America South America Asia-Pacific China MENA
Tel: +32 3 780 65 00 Tel: +1 203 323-0042 Tel: +55 11 2092 6220 Tel: +65 6777 22 08 Tel: +86 10-823 18 730 Tel: +971 4 443 60 58
Slideshare.net/newtec_satcom Fax: +32 3 780 65 49 Fax: +1 203 323-8406 Fax: +55 11 2093 3756 Fax: +65 6777 08 87 Fax: +86 10-823 18 731 Fax: +971 4 368 67 68