This document provides specifications for a FG Wilson P110-6 generator set including an alternator and Perkins 1104D-E44TAG2 engine. It has a prime power rating of 100kVA at 400/230V and a standby rating of 110kVA. Dimensions are 1980mm long, 890mm wide, and 1374mm high, weighing 1136kg dry and 1156kg wet. The generator set is EPA compliant and has a 50Hz/1500rpm configuration.
This document provides specifications for a FG Wilson P110-6 generator set including an alternator and Perkins 1104D-E44TAG2 engine. It has a prime power rating of 100kVA at 400/230V and a standby rating of 110kVA. Dimensions are 1980mm long, 890mm wide, and 1374mm high, weighing 1136kg dry and 1156kg wet. The generator set is EPA compliant and has a 50Hz/1500rpm configuration.
This document provides specifications for a FG Wilson P110-6 generator set including an alternator and Perkins 1104D-E44TAG2 engine. It has a prime power rating of 100kVA at 400/230V and a standby rating of 110kVA. Dimensions are 1980mm long, 890mm wide, and 1374mm high, weighing 1136kg dry and 1156kg wet. The generator set is EPA compliant and has a 50Hz/1500rpm configuration.
This document provides specifications for a FG Wilson P110-6 generator set including an alternator and Perkins 1104D-E44TAG2 engine. It has a prime power rating of 100kVA at 400/230V and a standby rating of 110kVA. Dimensions are 1980mm long, 890mm wide, and 1374mm high, weighing 1136kg dry and 1156kg wet. The generator set is EPA compliant and has a 50Hz/1500rpm configuration.
Please refer to the output ratings technical data section for specific generator set outputs per voltage.
Dimensions and Weights
Length mm 1980 (78) Width mm 890 (35) Height mm 1374 (54.1) Weight (Dry) kg 1136 (2504) Weight (Wet) kg 1156 (2549) Ratings in accordance with ISO 8528, ISO 3046, IEC 60034, BS5000 and NEMA MG-1.22. Generator set pictured may include optional accessories. Prime Rating These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours. Standby Rating These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous rated (as defined in ISO 8528-3). Standard Reference Conditions Note: Standard reference conditions 25°C (77°F) Air Inlet Temp, 100m (328 ft) A.S.L. 30% relative humidity. Fuel consumption data at full load with diesel fuel with specific gravity of 0.85 and conforming to BS2869: 1998, Class A2. FG Wilson offer a range of optional features to allow you to tailor our generator sets to meet your power needs. Options available include: • Upgrade to CE Certification • A wide range of Sound Attenuated Enclosures • A variety of generator set control and synchronising panels • Additional alarms and shutdowns • A selection of exhaust silencer noise levels For further information on all of the standard and optional features accompanying this product please contact your local Dealer or visit: www.fgwilson.com P110-6
Ratings and Performance Data
Engine Make Perkins Engine Model: 1104D-E44TAG2 Alternator Make FG Wilson Alternator Model: FGL30040 Control Panel: FG100 Base Frame: Heavy Duty Fabricated Steel Circuit Breaker Type: 3 Pole MCCB Frequency: 50 HZ 60 HZ Engine Speed: RPM rpm 1500 Fuel Tank Capacity: litres (US gal) 218 (57.59) Fuel Consumption Prime litres (US gal)/hr 23.8 (6.3) Fuel Consumption Standby litres (US gal)/hr 25.5 (6.7)
Engine Technical Data
No. of Cylinders 4 Alignment IN LINE Cycle 4 STROKE Bore mm (in) 105 (4.1) Stroke mm (in) 127 (5) Induction TURBOCHARGED AIR TO AIR CHARGE COOLED Cooling Method WATER Governing Type ELECTRONIC Governing Class ISO 8528 G2 Compression Ratio 16.7:1 Displacement L (cu. in) 4.4 (268.4) Moment of Inertia: kg m² (lb/in²) 1.324 (4524) Voltage 12 Ground Negative Battery Charger Amps 65 Engine Weight Dry kg (lb) 439 (968) Engine Weight Wet kg (lb) 448 (988)
Engine Performance Data 50 Hz 60 Hz
Engine Speed rpm 1500 Gross Engine Power Prime kW (hp) 95.8 (128) Gross Engine Power Standby kW (hp) 105.1 (141) BMEP Prime kPa (psi) 1742 (252.7) BMEP Standby kPa (psi) 1911 (277.2) P110-6
Fuel System Fuel Filter Type: Replaceable Element Recommended Fuel: Class A2 Diesel Fuel Consumption at 110 % Load 100 % Load 75 % Load 50 % Load 50 Hz Prime: l/hr (US gal/hr) 25.5 (6.7) 23.8 (6.3) 18.9 (5) 12.9 (3.4) 50 Hz Standby l/hr (US gal/hr) - 25.5 (6.7) 20.4 (5.4) 14.2 (3.8) 60 Hz Prime l/hr (US gal/hr) 60 Hz Standby l/hr (US gal/hr) - (Based on diesel fuel with a specific gravity of 0.83 and conforming to BS2869 classA2,EN590
Air System 50 Hz 60 Hz Air Filter Type: Paper Element Combustion Air Flow Prime m³/min (cfm) 6.4 (227) Combustion Air Flow Standby m³/min (cfm) 6.7 (238) Max. Combustion Air Intake Restriction kPa 5 (20.1)
Cooling System 50 Hz 60 Hz Cooling System Capacity l (US gal) 17 (4.5) Water Pump Type: Centrifugal Heat Rejected to Water & Lube Oil: Prime kW (Btu/min) 47.1 (2679) Heat Rejected to Water & Lube Oil: Standby kW (Btu/min) 51.9 (2952) Heat Radiation to Room*: Prime kW (Btu/min) 20.5 (1166) Heat Radiation to Room*: Standby kW (Btu/min) 22.5 (1280) Radiator Fan Load: kW (hp) 2.8 (3.8) Radiator Cooling Airflow: m³/min (cfm) 201 (7098) External Restriction to Cooling Airflow: Pa (in H2O) 125 (0.5) *: Heat radiated from engine and alternator Designed to operate in ambient conditions up to 50°C (122°F). Contact your local FG Wilson Dealer for power ratings at specific site conditions.
Lubrication System Oil Filter Type: Spin-on, Full flow Total Oil Capacity: l (US gal) 8.4 (2.2) Oil Pan Capacity: l (US gal) 6.9 (1.8) Oil Type: API CH4 15W-40 Oil Cooling Method: WATER
Exhaust System 50 Hz 60 Hz Maximum Allowable Back Pressure: kPa (in Hg) 15 (4.4) Exhaust Gas Flow: Prime m³/min (cfm) 16.4 (580) Exhaust Gas Flow: Standby m³/min (cfm) 17.4 (614) Exhaust Gas Temperature: Prime °C (°F) 657 (1215) Exhaust Gas Temperature: Standby °C (°F) 675 (1247) P110-6
Alternator Physical Data
No. of Bearings: 1 Insulation Class: H Winding Pitch: 2/3 Winding Code 6P/6S Wires: 4 Ingress Protection Rating: IP23 Excitation System: SHUNT AVR Model: R120 * dependant on voltage code selected
Alternator Operating Data
Overspeed: rpm 2250 Voltage Regulation: (Steady state) % +/- 1.0 Wave Form NEMA = TIF: 50 Wave Form IEC = THF: % 2 Total Harmonic content LL/LN: % 2 Radio Interference: EN61000-6 Radiant Heat: 50 Hz kW (Btu/min) 8.7 (495) Radiant Heat: 60 Hz kW (Btu/min)
Short Circuit Capacity** % 270 270 270 270 270 Reactances Xd X’d X”d Reactances shown are applicable to prime ratings. *Based on 30% voltage dip at 0.6 power factor. ** With optional independant excitation system (PMG / AUX winding) P110-6
Output Ratings 50 Hz Prime Standby
Voltage Code kVA kW kVA kW
415/240V 100 80 110 88
400/230V 100 80 110 88
380/220V 100 80 110 88
230/115V
220/127V
220/110V
200/115V
240V
230V
220V
Output Ratings 60 Hz Prime Standby
Voltage Code kVA kW kVA kW
480/277V
440/254V
416/240V
400/230V
380/220V
240/139V
240/120V
230/115V
220/127V
220/110V
208/120V
240/120
220/110 #DEALER_LOGO
#FGWILSON_GENSET_IMAGE
P110-6
Dealer Contact Details
Documentation Operation and maintenance manual including circuit wiring diagrams.
Generator Set Standards
The equipment meets the following standards: BS5000, ISO 8528, ISO 3046, IEC 60034, NEMA MG-1.22.
Warranty The warranty for this product in prime applications is 12 months from date of start-up, unlimited hours (8760). For standby applications the warranty period is 24 months from date of start-up, limited to 500 hours per year.
FG Wilson manufactures product in the following locations:
Northern Ireland • Brazil • China • India With headquarters in Northern Ireland, FG Wilson operates through a Global Dealer Network. To contact your local Sales Office please visit the FG Wilson website at www.fgwilson.com. FG Wilson is a trading name of Caterpillar (NI) Limited. In line with our policy of continuous product development, we reserve the right to change specification without notice. 2021-10-21
