Available at VTU HUB (Android App) : Municipal Wastewater Engineering

Study Material Municipal Wastewater Engineering {18CV55}
Department of Civil Engineering, BMS Institute of Technology and Management, Bengaluru 560064
For further materials https //www.youtube.com/channel/UCeJdH2Kc0IjqW2eluEPpp3w (CV - Official YouTube Channel)
………………………………………………………………………………………………………………………….......…….
)
pp
A
id
MODULE 3
ro
nd
(A
B
U
H
TU
tV
A
e
bl
ila
va
A
Disposal by dilution
The dilution method for disposing of the sewage can be favorable

1. When sewage is comparatively fresh
2. When the diluting water has a high DO content
3. Where diluting waters are not used for the purpose of navigation
………………………………………………………………………………………………………………………………........ 45
Study Material Compiled by Dr Rajesh Gopinath, Associate Professor, (CV-BMSIT&M)
dr.rajeshgopinath@bmsit.in/dr.rajeshgopinath@gmail.com
………………………………………………………………………………………………………………………….......…….
4. Where the flow of currents of the diluting water are favorable, causing no deposition,
nuisance or destruction of aquatic life
5. When the outfall sewer of the city or the treatment plant is situated near natural waters.
Dilution in Rivers and self-purification of natural streams

1. Physical forces
)
a. Dilution and dispersion
pp
b. Sedimentation
c. Sunlight
A
2. Chemical forces
a. Oxidation
id
b. Reduction
ro
Dilution and Dispersion
nd
When the putrescible organic matter is discharged into a large volume of water contained in the
(A
river stream, it gets rapidly dispersed and diluted. The action thus results in diminishing the
concentration of organic matter and thus reduces potential nuisance of sewage.
B
Sedimentation
U
H
The Settleable solids if present in sewage effluents will settle down into the bed of the river, near
the outfall of sewage thus helping in the self-purification process.
TU
Sunlight
tV
The sunlight has a bleaching and stabilizing effect of bacteria. It also helps certain
A
microorganisms to derive energy from it and convert themselves into food for other forms of life
through photosynthesis.
e
bl
Oxidation
ila
The oxidation of organic matter present in sewage effluents, will start as soon as the sewage
va
outfalls into the river water containing DO. The process of oxidation will continue till the
organic matter has been completely oxidized. This is the most important action responsible for
A
affecting self-purification of rivers.

Reduction
The various factors on which these natural forces of purification depend are:
 Temperature
 Turbulence
………………………………………………………………………………………………………………………………........ 46
………………………………………………………………………………………………………………………….......…….
 Hydrography
Zones of pollution in a River-Stream
1. Zone of degradation: This zone is characterized by water becoming dark and turbid with
formation of sludge deposits at the bottom.
)
pp
2. Zone of active decomposition: This is characterized by heavy pollution by water
becoming grayish and darker than in the previous zone.
3. Zone of Recovery: In this zone the river stream tries to recover from its degraded
A
condition to its former appearance.
id
4. Zone of cleaner water: In this zone river attains original conditions with DO rising up to
the saturation value.
ro
Indices of self-purification
nd
Oxygen deficit (D) = Saturation D.O. – Actual D.O.
(A
De-oxygenation curve: In a polluted stream, the DO content goes on reducing due to
decomposition of volatile organic matter. The rate of de-oxygenation depends upon the amount
B
of the organic matter remaining to be oxidized at the given time as well as on the temperature of
U
reaction.
H
Re-oxygenation curve: In order to counter balance the consumption of DO due to

deoxygenation atmosphere supplies oxygen to the water and the process is called reoxygenation.
TU
Oxygen deficit curve: In a running polluted stream exposed to the atmosphere, the
deoxygenation as well as the reoxygenation goes hand in hand. If deoxygenation exceeds
tV
reoxygenation then oxygen deficit will result.

A
Stratification in Lakes
e
Biological zones in lakes

bl
ila
1. Euphotic zone: The upper layer of lake water through which sunlight can penetrate is
called Euphotic zone
va
2. Littoral zone: The shallow water near the shore, in which rooted plants grow is called
littoral zone.
A
3. Benthic zone: The bottom sediments in a lake comprise what is called benthic zone.
Productivity of a lake
1. Oligotrophic lakes
2. Mesotrophic lakes
3. Eutrophic Lakes
………………………………………………………………………………………………………………………………........ 47
………………………………………………………………………………………………………………………….......…….
4. Senescent Lakes
DISPOSAL ON LAND
The method will help in increasing crop yields as the sewage generally contains a lot of
fertilizing minerals and other elements.
)
The effluent irrigation method for disposal of sewage can be favorably adopted under the
pp
following conditions
1. When some natural rivers are not located in the vicinity.
A
2. When irrigation water is scarcely available broad irrigation may be practiced over it with
the help of sewage effluents.
id
3. In areas of low rainfall
ro
4. When sandy, loamy or alluvial soils are present.
5. When areas of low water table
nd
Effluent irrigation
The chief consideration is the successful disposal of sewage.

(A
B
Sewage Farming
U
H
The stress is laid upon the use of sewage effluents for irrigating crops and increasing the fertility
TU
of the fertility of soil.
Methods of applying sewage effluents to farms

tV
1. Surface irrigation called broad irrigation

2. Sub surface irrigation
A
3. Sprinkler or spray irrigation

e
Sewage sickness
bl
ila
When sewage is applied continuously on a piece of land, the soil pores or voids may get filled up
and clogged with the sewage matter retained in them. The time taken for such a clogging will of
va
course depend upon the type of soil.

A
Preventive measures
1. Primary treatment of sewage

2. Choice of land
3. Under-drainage of soil
4. Giving rest to the land
………………………………………………………………………………………………………………………………........ 48
………………………………………………………………………………………………………………………….......…….
5. Rotation of crops
6. Applying shallow depths
PROBLEM
1. A stream, saturated with DO has a flow of 1.2m3/s, BOD of 4mg/l & rate constant of 0.3
)
pp
per day. It receives an effluent discharge of 0.25m3/s having BOD 20mg/l, DO 5mg/l &
rate constant 0.13 per day. The average velocity of flow of the stream is 0.18 m/s.
A
Calculate the DO deficit at point 20km & 40km downstream. Assume that the
id
temperature is 200C throughout & BOD is measured at 5 days. Take saturation DO at
200C as 9.17mg/l.
ro
nd
Solution: y5=BOD of the mix
Qs= Stream Flow=1.2m3/s
ys=BOD of stream=4mg/l
(A
Qe=Effluent discharge=0.25m3/s
B
U
ye=BOD of effluent=20mg/l
H
y5=(Qsys+Qeye)/(Qs+Qe)
TU
=(1.2*4)+(0.25*20)/(1.2*0.25)
=6.759 mg/l
tV
y5=L0(1-10-Kt)
A
6.759=L0(1-10-0.13*5)
L0=8.71mg/l
e
bl
(DO)s=Saturation DO of stream at 200C

(DO)e= Do of effluent = 5mg/l
ila
(DO)mix=(DO)S*Qs + (DO)e*Qe / (Qs+Qe)

va
= (9.17*1.2) + (5*0.25) / (1.2+0.25)

= 8.45 mg/l
A
1. DO deficit at a point 20km downstream

t=distance/velocity= (20*1000)/(0.18*60*60*24)
=1.286days
………………………………………………………………………………………………………………………………........ 49
………………………………………………………………………………………………………………………….......…….
Using streeter-phelps equation

Dt=KL0/(R-K)[10-Kt-10-Rt] + D010-Rt
=0.13*8.71/(0.3-0.13)[10-0.13*1.286-10-0.3*1.286] + 0.72*10-0.3*1.286
=2.089mg/l
)
pp
2. DO deficit at a point 40km downstream
A
t=40*1000/(0.18*60*60*24)=2.572 days
Dt=0.13*8.71/(0.3-0.13)[10-0.13*2.572-10-0.3*2.572] + 0.72*10-0.3*2.572
id
=2.079 mg/l
ro
nd
2.A town discharges 80cumecs of sewage into a stream having a rate of flow of 1200 cumecs
during lean days, at a 5-day BOD of sewage at the given temperature is 250mg/l. Find the
(A
amount of critical DO deficit & its location in the downstream portion of the stream. Assume
B
deoxygenation coefficient K as 0.1 & coefficient of self-purification (fs) as 3.5. Assume
U
saturation DO at given temperature as 9.2mg/l.

H
Solution: (DO)stream=9.2mg/l
TU
(DO)effluent=0
(DO)mix=(9.2*1200)+(0*80)/(1200+80) =8.625 mg/l
tV
Initial DO deficit=D0=9.2-8.625=0.575mg/l
A
5day BOD of the mix ys =(0*1200)+(250*80)/(1200+80)=15.625mg/l.

ys=L0[1-(10)-K*5]
e
15.626=L0[1-(10)-0.1*5]
bl
L0=22.85mg/l
ila
va
tc=1/(K(fs-1)log10[fs{1-(fs-1)D0/L0}]
=2.063days
A
Dc=L0/fs(10)-Ktc
=22.85/3.5(10)-0.1*2.063=4.06mg/l
Xc=v*tc=0.12(2.063*24*60*60)*10-3
21.39km
………………………………………………………………………………………………………………………………........ 50
………………………………………………………………………………………………………………………….......…….
Sewage treatment or Municipal wastewater treatment is the combination of physical and

biological process with chemical process occasionally applied additionally to bring the sewage
to such a quality that it is not harmful to human health and environment.
)
Purpose of Sewage Treatment
pp
The sewage is treated before its final disposal because of the following reasons:
A
1. To kill the pathogenic bacteria present in the sewage which may result in water borne
diseases like cholera, typhoid, dysentery etc.
id
2. To avoid unhygienic condition in the area because of highly fouled sewage.
ro
3. To protect aquatic life from harmful effects of sewage directly discharged into the water
body (river or sea).
nd
4. The stagnant sewage may percolate into the soil and pollute the ground water reservoir
which may lead to epidemics.
(A
5. Treatment makes the possibility of reuse of valuable fresh water for agriculture purposes.
6. The treated sewage may be used for reclamation of land.
B
Classification of Sewage Treatment
U
H
1. Preliminary Treatment (Physical)

2. Primary Treatment (Physical)
TU
3. Secondary (Biological)
4. Trickling Filter (Biological)
tV
5. Advance Treatment Activated Sludge Process (Physical, Chemical and Biological)
Preliminary Treatment
A
e
It consists of removal of floating material (like dead animals, tree branches, papers, plastics,
bl
wood pieces, vegetables peels etc.) and also the heavy Settleable inorganic solids (grit etc.).
Preliminary treatment includes: Screening, Comminutors, Grit Chamber, Detritus Chamber and
ila
Skimming Tank Preliminary Treatment

va
Primary Treatment
A
It is a plain sedimentation process to remove suspended organic solids from the sewage.
Chemical are sometimes used to remove finely divided and colloidal solids. Primary Treatment
Secondary Treatment
The secondary treatment is required to remove the soluble and colloidal organic matters which
remain after primary treatment. As it is mostly biological process also called biological treatment.
………………………………………………………………………………………………………………………………........ 51
………………………………………………………………………………………………………………………….......…….
Trickling Filter
Trickling Filter also known as percolating or sprinkling filter is like a well having depth up to
about 2m and filled with some granular media. The sewage is sprinkled over the media which
percolates through filter media and is collected through the under-drainage system. Trickling
Filter
)
pp
Sludge Treatment /Advanced Treatment
A
It may be defined as the sludge which settles down after the sewage has been agitated freely in
the presence of abundant atmospheric oxygen. It contains a large number of aerobic bacteria and
id
other organisms and acts a fertilizing constituent (agent).
ro
Preliminary treatment
nd
It consists of removal of floating material (like dead animals, tree branches, papers, plastics,
(A
wood pieces, vegetables peels etc.) and also the heavy Settleable inorganic solids (grit etc.).
Preliminary treatment includes:
B
1. Screening
U
2. Comminutors
H
3. Grit Chamber
4. Detritus Chamber
TU
5. Skimming Tank
tV
Screening
A
Screening is the removal of large size floating matters by a series of closely spaced bars placed
across the flow inclined at 30o – 60o. These floating materials, if not removed, will choke the
e
pipes or adversely affect the working of the sewage pumps.

bl
ila
Screens should preferably be placed before the grit chambers, however, if the quality of grit is
not important, as in the case of land sliding. Screens may be placed after the grit chamber or
va
something within the body of the grit chamber.

The screens may be cleaned manually or mechanically, the waste accumulated is removed
A
periodically which can be disposed of by burial, disintegration or used as fertilizers.
………………………………………………………………………………………………………………………………........ 52
………………………………………………………………………………………………………………………….......…….
)
pp
A
id
ro
nd
(A
B
Comminutors
U
The larger suspended solids are reduced to smaller size by comminutors rather than removing by
H
screens. The comminutors are usually provided in large plants. Comminutor consists of a fixed
TU
screen and a moving cuter or curved screen with rotating or oscillating cutter. A typical
comminutor shown in the figure consists of rotating hollow cast iron drum about its vertical
axis. Comminutors should be installed on the d/s end of grit chamber to avoid its excessive wear.
tV
A
e
bl
ila
va
A
Grit Removal
………………………………………………………………………………………………………………………………........ 53
………………………………………………………………………………………………………………………….......…….
Grits are heavy inorganic solids such as sand, metal fragments, egg shells of specific gravity
ranging from 2 -2.65. They cause excessive wear during different treatment stages and therefore
must be removed. A grit chamber may be horizontal flow or vertical flow and is manually or
mechanically cleaned. Grit of a properly designed and operated chamber is free from organic
matters which may be used as land fill. If grit contains organics in high proportion, it is disposed
of by burial or used as manure.
)
pp
A
id
ro
nd
(A
B
U
Detritus Chamber
H
They are installed to remove finer particles which are left from grit chamber.
TU
Skimming Tank
tV
It is used to separate grease and oil and other floating matters which may adversely affect the
efficiency of the treatment facilities. Grease may tend to trap trickling filter and coat the
A
biological flock in the activated sludge process. The floating matters may be collected by
continuous mechanical process or by hand manually. They have baffled entrance and outlet.
e
bl
ila
va
A
………………………………………………………………………………………………………………………………........ 54
………………………………………………………………………………………………………………………….......…….
Designing criteria
Horizontal velocity = 5 – 25 cm/sec
Retention / detention time ≤ 15 min
Depth of tank = 1 m
Primary Treatment of Wastewater
)
pp
Primary Treatment of Wastewater is a plain sedimentation process to remove suspended organic
solids from the sewage. Chemical are sometimes used to remove finely divided and colloidal
A
solids.
id
Objectives of Primary Treatment
ro
The main objectives of primary treatment of wastewater are:
nd
1. To reduce the strength of sewage to the extent of 30% to 50%.
2. To remove Settleable solids by 80% to 90%.
3.
4.
To reduce BOD by 30% to 35%.
To make the sewage fit for further treatment process.
(A
5.
B
Primary Sedimentation Tank
U
H
Primary sedimentation tank is also known as primary clarifier and is located just after grit
chamber. It may be rectangular, circular or square shape. The principle and construction details
TU
are same as that of plain sedimentation tank of W.T.P.

tV
A
e
bl
ila
va
Design Specifications of Primary Sedimentation Tank

A
1. Hydraulic loading rate (surface overflow rate)/settling velocity V s = (0.3 – 0.7) mm/sec
(1 – 2.5 m/hr)
2. Detention time / retention time Td = 1 – 2 hrs
3. Depth of Tank = (1 – 5) m
4. BOD removal (20 – 40) %
5. Suspended solids removal (30 – 60) %
………………………………………………………………………………………………………………………………........ 55
………………………………………………………………………………………………………………………….......…….
6. Minimum number of tanks = 2

7. Sludge accumulated = 2.5 Kg of wet solids / m3 of flow.
Types of Primary Sedimentation Tanks
1. Typical primary sedimentation tank
)
2. Circular Radial Flow Tank
pp
3. Up Flow Tanks
A
PROBLEMS
1. Design a primary sedimentation settling tank of rectangular shape for a town having a
id
population of 50000 with a water supply of 180litres per capita per day.
ro
nd
Solution: Assume 80% water supplied to the city is converted into sewage.
=(80/100)*50000*180=7200*103 l/day.
(A
B
Capacity required=7200/24*2=600m3
U
Let us assume an overflow rate of 30m3/d/m2 for average flow

H
Surface area=7200/30=240m2
TU
Effective depth=600/240=2.5m
B*L=240
tV
L=4B
B*4B=240
A
B=7.5m & L=30m

e
Provide 4m for inlet & outlet arrangements

bl
Total length=30+4=34m
ila
Provide 1m depth for sludge accumulation & 0.5m as free board.

Total Depth=2.5+1+0.5=4m
va
Dimensions of the tank will be 34m*7.5m*4m.

A
2. Design a circular primary settling tank for a town having a population of 50000 with a
water supply of 180litres per capita per day.
Solution: Sewage flow=7200m3/day
Capacity required=7200*2/24=600m3
………………………………………………………………………………………………………………………………........ 56
………………………………………………………………………………………………………………………….......…….
Let us provide an overflow rate of 30m3/d/m2

Surface area required=7200/30=240m2
Diameter of the tank=(240*4)/=17.5m
Effective depth of tank=capacity/surface area=600/240=2.5m
Provide 1m extra depth of sludge accumulation & 0.5m depth as free board.
)
pp
A
id
ro
nd
(A
B
U
H
TU
tV
A
e
bl
ila
va
A
………………………………………………………………………………………………………………………………........ 57

Available at VTU HUB (Android App) : Municipal Wastewater Engineering

Uploaded by

Copyright:

Available Formats

Available at VTU HUB (Android App) : Municipal Wastewater Engineering

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Available at VTU HUB (Android App) : Municipal Wastewater Engineering

Uploaded by

Copyright:

Available Formats

Study Material Municipal Wastewater Engineering {18CV55}

The dilution method for disposing of the sewage can be favorable

Dilution in Rivers and self-purification of natural streams

affecting self-purification of rivers.

Zones of pollution in a River-Stream

Re-oxygenation curve: In order to counter balance the consumption of DO due to

reoxygenation then oxygen deficit will result.

Biological zones in lakes

The chief consideration is the successful disposal of sewage.

of the fertility of soil.

Methods of applying sewage effluents to farms

1. Surface irrigation called broad irrigation

3. Sprinkler or spray irrigation

course depend upon the type of soil.

1. Primary treatment of sewage

(DO)s=Saturation DO of stream at 200C

(DO)mix=(DO)S*Qs + (DO)e*Qe / (Qs+Qe)

= (9.17*1.2) + (5*0.25) / (1.2+0.25)

1. DO deficit at a point 20km downstream

Using streeter-phelps equation

saturation DO at given temperature as 9.2mg/l.

5day BOD of the mix ys =(0*1200)+(250*80)/(1200+80)=15.625mg/l.

Sewage treatment or Municipal wastewater treatment is the combination of physical and

1. Preliminary Treatment (Physical)

5. Advance Treatment Activated Sludge Process (Physical, Chemical and Biological)

Skimming Tank Preliminary Treatment

pipes or adversely affect the working of the sewage pumps.

something within the body of the grit chamber.

periodically which can be disposed of by burial, disintegration or used as fertilizers.

Primary Treatment of Wastewater

are same as that of plain sedimentation tank of W.T.P.

Design Specifications of Primary Sedimentation Tank

6. Minimum number of tanks = 2

Types of Primary Sedimentation Tanks

1. Typical primary sedimentation tank

Let us assume an overflow rate of 30m3/d/m2 for average flow

B=7.5m & L=30m

Provide 4m for inlet & outlet arrangements

Provide 1m depth for sludge accumulation & 0.5m as free board.

Dimensions of the tank will be 34m*7.5m*4m.

Let us provide an overflow rate of 30m3/d/m2

You might also like

(DO)mix=(DO)SQs + (DO)eQe / (Qs+Qe)

= (9.171.2) + (50.25) / (1.2+0.25)

5day BOD of the mix ys =(01200)+(25080)/(1200+80)=15.625mg/l.

Dimensions of the tank will be 34m7.5m4m.