Mechanical Engineering Specification

ME.S.008.ASME
ASME PIPING Rev: 2
Class “ASL” Rev Date: 31-AUG-2012

SERVICE: HYDROCARBON PROCESS, LOW TEMPERATURE, SOUR SERVICE

TEMPERATURE: -45 to 149°C (-50 to 300°F) DESIGN CODE: ASME B31.3 PRESSURE CLASS: CL 150
DESIGN PRESSURE: 1965 kPag (285 psig) @ 38ºC (100ºF) (Note 1) CORROSION ALLOWANCE: 1.6 mm (0.063") Min. (Appendix J)
PRESSURE TEST: Recorded Hydrotest (Note 2) PWHT: (Note 14)
HYDROTEST PRESSURE: 2948 kPag (428 psig) minimum for 1 hour JOINT NDE: 100% of all joints to be visually inspected
100% of all socket welds per welder to undergo MT
100% of all butt welds per welder to undergo RT

General Note:
1. All components shall meet the metallurgical requirements of the latest edition of NACE MR0175 / ISO 15156.

ITEM NPS RATING CONN. DESCRIPTION NOTES

PIPE ½ to 1½ SCH 80 (XS) SCRD / SW ASTM A333 Grade 6 (SMLS) PE 7, 8
1 to 1½ SCH 80 (XS) BW / RF ASTM A333 Grade 6 (SMLS) BE
2 to 24 SCH STD BW / RF ASTM A333 Grade 6 (SMLS) BE
FITTINGS ½ to 1½ Class 3000 SCRD / SW ASTM A350 LF2 Class 1 7, 8
1 to 24 Match Pipe BW ASTM A420 Grade WPL6 9
FLANGES 1 to 24 Class 150 RFWN ASTM A350 LF2 Class 1, Bored to Match Pipe 11
BLIND FLANGES 1 to 24 Class 150 RF ASTM A350 LF2 Class 1 11
NIPPLES ½ to 1½ SCH 80 (XS) SCRD ASTM A333 Grade 6 (SMLS) 5, 6, 7
SWAGES ½ to 1½ SCH 80 (XS) SCRD ASTM A350 LF2 Class 1 or A333 Grade 6 (SMLS) 5, 7
SOCKOLETS ¾ to 1½ Class 3000 SW ASTM A350 LF2 Class 1
THREADOLETS ½ to 1½ Class 3000 SCRD ASTM A350 LF2 Class 1 7
UNIONS ½ to 1½ Class 3000 SCRD / SW ASTM A350 LF2 Class 1 7, 8, 10
WELDOLETS 2 to 6 Match Pipe BW ASTM A350 LF2 Class 1
SPEC. BLINDS 1 to 24 Class 150 RF ASTM A516 Grade 70N 11, 17
GASKETS 1 to 12 Class 150 RF ASME B16.20 Spiral Wound, 316 SS / Flexible 11, 18
Graphite
14 to 24 Class 150 RF ASME B16.20 Spiral Wound, 316 SS / Flexible 11, 18
Graphite, 316 SS Inner Ring
STUDS ASTM A193 Grade B7M
NUTS ASTM A194 Grade 2HM
ORIFICE FLANGES 2 to 12 Class 300 RFWN ASTM A350 LF2 Class 1, Bored to suit pipe c/w ½" 11
taps and jack bolts
PLUGS ½ to 1 Class 3000 SCRD Hex Head, ASTM A350 LF2 Class 1 7
1½ Class 3000 SCRD Solid Round, ASTM A350 LF2 Class 1 7, 13
TUBING ¼" to ⅜" OD 0.035" WT PE ASTM A269, 316 Stainless Steel, annealed (SMLS) 7, 12
½" OD 0.049" WT PE ASTM A269, 316 Stainless Steel, annealed (SMLS) 7, 12
FLANGE 2 to 24 Class 150 RF Pikotek PGE or PSI LineBacker, Type F, G-10 16, 18
ISOLATION KITS retainer, Teflon seal material, full length G-10
sleeves, and G-10 single set washers (1/8" thick)

1 of 3
 Mechanical Engineering Specification
ME.S.008.ASME
ASME PIPING Rev: 2
Class “ASL” Rev Date: 31-AUG-2012

SERVICE: HYDROCARBON PROCESS, LOW TEMPERATURE, SOUR SERVICE

TEMPERATURE: -45 to 149°C (-50 to 300°F) DESIGN CODE: ASME B31.3 PRESSURE CLASS: CL 150
DESIGN PRESSURE: 1965 kPag (285 psig) @ 38ºC (100ºF) (Note 1) CORROSION ALLOWANCE: 1.6 mm (0.063") Min. (Appendix J)
PRESSURE TEST: Recorded Hydrotest (Note 2) PWHT: (Note 14)
HYDROTEST PRESSURE: 2948 kPag (428 psig) minimum for 1 hour JOINT NDE: 100% of all joints to be visually inspected
100% of all socket welds per welder to undergo MT
100% of all butt welds per welder to undergo RT

ITEM NPS TAG DESCRIPTION

BALL VALVES ½ to 1½ B-20S400 2000 psig CWP, SW, regular port, floating, lever operated, bolted or threaded body, A350 LF2 or A352
LCC body, 316 stainless steel ball and stem, A193 B7M bolts, A194 2HM nuts, manufacturer’s standard
seats, fire safe to API 607, ASME B16.34, NACE MR-0175 / ISO 15156
½ to 1½ B-20S410 2000 psig CWP, SW, full port, floating, lever operated, bolted or threaded body, A350 LF2 or A352 LCC
body, 316 stainless steel ball and stem, A193 B7M bolts, A194 2HM nuts, manufacturer’s standard seats,
fire safe to API 607, ASME B16.34, NACE MR-0175 / ISO 15156
½ to 1½ B-20T400 2000 psig CWP, THD, regular port, floating, lever operated, bolted or threaded body, A350 LF2 or A352
LCC body, 316 stainless steel ball and stem, A193 B7M bolts, A194 2HM nuts, manufacturer’s standard
seats, fire safe to API 607, ASME B16.34, NACE MR-0175 / ISO 15156
½ to 1½ B-20T410 2000 psig CWP, THD, full port, floating, lever operated, bolted or threaded body, A350 LF2 or A352 LCC
body, 316 stainless steel ball and stem, A193 B7M bolts, A194 2HM nuts, manufacturer’s standard seats,
fire safe to API 607, ASME B16.34, NACE MR-0175 / ISO 15156
1 to 6 B-01R400 Class 150 RF, regular port, floating, lever operated, bolted body, A350 LF2 or A352 LCC body, 316
stainless steel ball and stem, A193 B7M bolts, A194 2HM nuts, manufacturer’s standard seats, fire safe to
API 607, ASME B16.34, NACE MR-0175 / ISO 15156
1 to 6 B-01R410 Class 150 RF, full port, floating, lever operated, bolted body, A350 LF2 or A352 LCC body, 316 stainless
steel ball and stem, A193 B7M bolts, A194 2HM nuts, manufacturer’s standard seats, fire safe to API 607,
ASME B16.34, NACE MR-0175 / ISO 15156
8 to 24 B-01R420 Class 150 RF, regular port, trunnion mounted, gear operated, bolted body, A350 LF2 or A352 LCC body,
electroless nickel plated (1-1.5 mil, high phosphorus) A350 LF2 ball and stem, A193 B7M bolts, A194
2HM, manufacturer’s standard seats, nuts, fire safe to API 607, ASME B16.34, NACE MR-0175 / ISO
15156
8 to 24 B-01R430 Class 150 RF, full port, trunnion mounted, gear operated, bolted body, A350 LF2 or A352 LCC body,
electroless nickel plated (1-1.5 mil, high phosphorus) A350 LF2 ball and stem, A193 B7M bolts, A194
2HM nuts, manufacturer’s standard seats, fire safe to API 607, ASME B16.34, NACE MR-0175 / ISO
15156
CHECK VALVES ½ to 1½ C-08S400 Class 800, SW, swing check, A350 LF2 or A352 LCC body, bolted or screwed cap, A193 B7M bolts, A194
2HM nuts, API trim #12 (316SS and HF), ASME B16.34, API 602, NACE MR-0175 / ISO 15156
½ to 1½ C-08S420 Class 800, SW, piston check, A350 LF2 or A352 LCC body, bolted or screwed cap, A193 B7M bolts, A194
2HM nuts, API trim #12 (316SS and HF), ASME B16.34, API 602, NACE MR-0175 / ISO 15156
½ to 1½ C-08T400 Class 800, THD, swing check, A350 LF2 or A352 LCC body, bolted or screwed cap, A193 B7M bolts,
A194 2HM nuts, API trim #12 (316SS and HF), ASME B16.34, API 602, NACE MR-0175 / ISO 15156
½ to 1½ C-08T420 Class 800, THD, piston check, A350 LF2 or A352 LCC body, bolted or screwed cap, A193 B7M bolts,
A194 2HM nuts, API trim #12 (316SS and HF), ASME B16.34, API 602, NACE MR-0175 / ISO 15156
1 to 16 C-01R420 Class 150, RF; piston type (non-slam, pulse dampened); A352-LCC body; bolted cap with graphite filled
spiral wound gasket; API Trim #10 to NACE (Piston: 316; Seats: renewable 316); A193-B7M / A194-2HM
bolting; temperature -46ºC to 400ºC; certified to NACE MR0175/ISO 15156; per ASME B16.34, API 598
(and API 600 as applicable).
1 to 24 C-01R400 Class 150 RF, swing check, A350 LF2 or A352 LCC body, bolted cap, A193 B7M bolts, A194 2HM nuts,
API trim #12 (316SS and HF), ASME B16.34, NACE MR-0175 / ISO 15156
1 to 24 C-01R400 Class 150 RF, tilting disc check, A350 LF2 or A352 LCC body, bolted cap, A193 B7M bolts, A194 2HM
nuts, API trim #12 (316SS and HF), ASME B16.34, NACE MR-0175 / ISO 15156

2 of 3
 Mechanical Engineering Specification
ME.S.008.ASME
ASME PIPING Rev: 2
Class “ASL” Rev Date: 31-AUG-2012

SERVICE: HYDROCARBON PROCESS, LOW TEMPERATURE, SOUR SERVICE

TEMPERATURE: -45 to 149°C (-50 to 300°F) DESIGN CODE: ASME B31.3 PRESSURE CLASS: CL 150
DESIGN PRESSURE: 1965 kPag (285 psig) @ 38ºC (100ºF) (Note 1) CORROSION ALLOWANCE: 1.6 mm (0.063") Min. (Appendix J)
PRESSURE TEST: Recorded Hydrotest (Note 2) PWHT: (Note 14)
HYDROTEST PRESSURE: 2948 kPag (428 psig) minimum for 1 hour JOINT NDE: 100% of all joints to be visually inspected
100% of all socket welds per welder to undergo MT
100% of all butt welds per welder to undergo RT

ITEM NPS TAG DESCRIPTION

GATE VALVES ½ to 1½ G-08S400 Class 800, SW, OS&Y, A350 LF2 or A352 LCC body, bolted bonnet, solid wedge, handwheel
operated, A193 B7M bolts, A194 2HM nuts, API trim #12 (316SS and HF), ASME B16.34, API 602,
NACE MR-0175 / ISO 15156
½ to 1½ G-08T400 Class 800, THD, OS&Y, A350 LF2 or A352 LCC body, bolted bonnet, solid wedge, handwheel
operated, A193 B7M bolts, A194 2HM nuts, API trim #12 (316SS and HF), ASME B16.34, API 602,
NACE MR-0175 / ISO 15156
½ to 1½ G-08X400 Class 800, SW x THD, OS&Y, A350 LF2 or A352 LCC body, bolted bonnet, solid wedge,
handwheel operated, A193 B7M bolts, A194 2HM nuts, API trim #12 (316SS and HF), ASME
B16.34, API 602, NACE MR-0175 / ISO 15156
1 to 10 G-01R410 Class 150 RF, OS&Y, A350 LF2 or A352 LCC body, bolted bonnet, flexible wedge, handwheel
operated, A193 B7M bolts, A194 2HM nuts, API trim #12 (316SS and HF), ASME B16.34, API 600,
NACE MR-0175 / ISO 15156
12 to 24 G-01R411 Class 150 RF, OS&Y, A350 LF2 or A352 LCC body, bolted bonnet, flexible wedge, gear operated,
A193 B7M bolts, A194 2HM nuts, API trim #12 (316SS and HF), ASME B16.34, API 600, NACE
MR-0175 / ISO 15156
GLOBE VALVES ½ to 1½ O-08S400 Class 800, SW, OS&Y, A350 LF2 or A352 LCC body, bolted bonnet, standard body, handwheel
operated, A193 B7M bolts, A194 2HM nuts, API trim #12 (316SS and HF), ASME B16.34, API 602,
NACE MR-0175 / ISO 15156
½ to 1½ O-08T400 Class 800, THD, OS&Y, A350 LF2 or A352 LCC body, bolted bonnet, standard body, handwheel
operated, A193 B7M bolts, A194 2HM nuts, API trim #12 (316SS and HF), ASME B16.34, API 602,
NACE MR-0175 / ISO 15156
½ to 1½ O-08X400 Class 800, SW x THD, OS&Y, A350 LF2 or A352 LCC body, bolted bonnet, standard body,
handwheel operated, A193 B7M bolts, A194 2HM nuts, API trim #12 (316SS and HF), ASME
B16.34, API 602, NACE MR-0175 / ISO 15156
1 to 10 O-01R400 Class 150 RF, OS&Y, A350 LF2 or A352 LCC body, bolted bonnet, standard body, handwheel
operated, A193 B7M bolts, A194 2HM nuts, API trim #12 (316SS and HF), ASME B16.34, NACE
MR-0175 / ISO 15156
12 to 24 O-01R401 Class 150 RF, OS&Y, A350 LF2 or A352 LCC body, bolted bonnet, standard body, gear operated,
A193 B7M bolts, A194 2HM nuts, API trim #12 (316SS and HF), ASME B16.34, NACE MR-0175 /
ISO 15156
NEEDLE VALVES ¼ to ¾ N-60T500 6000 psig CWP, FNPT x FNPT, 316 SS body and trim, threaded bonnet, NACE MR-0175 / ISO
15156
¼ to ¾ N-60M500 6000 psig CWP, MNPT x FNPT, 316 SS body and trim, threaded bonnet, NACE MR-0175 / ISO
15156
¾x½ N-60M501 6000 psig CWP, ¾" MNPT x ½" FNPT, 316 SS body and trim, threaded bonnet, NACE MR-0175 /
ISO 15156
BUTTERFLY 3 to 12 T-01R440 Class 150 RF - flanged; Triple Offset Design; A352-LCC body; Stem: 316 SS; Disc: 316 SS; Seats: 316 SS;
VALVES flexible graphite packing with corrosion inhibitor; A193-B7M / A194-2HM bolting; gear operator; fire
tested to API 607; temperature -46ºC to 340ºC; certified to NACE MR0175/ISO 15156; design per ASME
B16.34; dimensions per ISO 5752; Min. Class V shutoff per FCI-70-2

3 of 3