Differential pressure

switches for air, flue

and exhaust gases
Pressure switch for gas

LGW…A4
LGW…A4/2
5.08

Technical description Approvals

The differential pressure switch LGW… EC type test approval as per EC Gas
A4 is an adjustable differential pressure Appliance Directive:
switch as per EN 1854 for automatic
burner controls. LGW…A4 CE-0085 AQ 0673
It is suitable for switching a circuit on, off or LGW…A4/2 CE-0085 AQ 0673
over on changes in actual pressure value
relative to the set reference value. EC type test approval as per EC Pres-
The reference value (switching point) sure Equipment Directive:
is adjusted on a setting wheel provided
Printed in Germany • Edition 02.10 • Nr. 223 839

with a scale.The test nipple is integrated LGW… CE0036

in metal housing as standard.
Pressure switch Class "S" as per EN 1854.
Application
Differential pressure monitoring in firing, Approvals in other important gas-
ventilation and air-conditioning systems. consuming countries.
Differential pressure switches: suitable
for air, flue and exhaust gases.
Pressure switches: suitable for gases of
families 1,2,3 and other neutral gase-
1…6 ous media.
Functional description Overpressure switch LGW…A4 Vacuum switch LGW…A4
Differential pressure switch in pressure Pressure connection G 1/4 Pressure connection G 1/8
and vacuum ranges. The differential Single-acting pressure switch in the Single-acting pressure switch in the
pressure acts via the diaphragm against overpressure range. low pressure range. The switching
the force of the setting spring on the The switching mechanism responds if mechanism responds to vacuum which
microswitch.The pressure switch oper- there is an overpressure which switch- switches an electric circuit on, off or
ates without any auxiliary power. es on, off or over to an electric circuit over when the set reference value is
if the set reference value is exceeded exceeded or undershot. The pressure
Differential pressure switch or undershot. connection G 1/4 may not be closed.
LGW…A4 The pressure connection G 1/8 may
The switching mechanism responds not be closed.
to differential pressure which acts
between the two pressure chambers.
It switches an electric circuit on, off or
over when the set reference value is
exceeded or undershot.

LGW…A4 switching function Definition of switching difference ∆p

The switching difference ∆p is the pres-
As pressure rises:
sure difference between the upper and
1 NC opens, 2 NO closes
lower switching pressures.
As pressure falls:
1 NC closes, 2 NO opens

Pressure at
meter
2 NO
Setting tolerance

COM
Upper switching
pressure
Switching difference, ∆p

Falling
1 NC
Adjustment as

p
pressure falls

Rising
Lower
switching
pressure

2 NO
COM
3 1 NC
LGW…A4, Design: Clear cover
Protection class: IP 54

5 Protection against ingress of solid particles ø ≥ 1 mm.

IP 54
p

N
Protection against access to hazardous parts using ø ≥ 1 mm wire
Complete contact protection

4 Protection against a water jet.

2 NO
No hazardous conditions may result.
COM
3 1 NC
LGW…A4/2, Design: Metal housing
Protection class: IP 65

6 Protection against the entry of dust (dust sealed).

p N
Protection against access to hazardous parts using ø ≥ 1 mm wire
IP 65 Complete contact protection

5 Protection against a water jet from a nozzle directed at the unit (housing)
from any directions
No hazardous conditions may result (water jet).
2…6
 Specifications

Max. operating pressure LGW 3 A4 - LGW 150 A4 500 mbar (50 kPa)
LGW 3 A4/2 - LGW 150 A4/2 500 mbar (50 kPa)

Pressure connection P+: G 1/4 female thread ISO 228 on centre of housing underside: gas or air
P+: G 1/4 screw plug on side of housing: gas or air
P-: G 1/8 female thread ISO 228 on side of housing underside: only air

Measuring connection Instrument gland integrated in metal housing, ø 9

Temperature range Ambient temperature: -15 °C to +70 °C

Medium temperature: -15 °C to +70 °C
Storage temperature: -30 °C to +80 °C

Materials LGW…A4
Housing base aluminum die casting
Hood Polycarbonate
Switch Polycarbonate
Diaphragms NBR
Switching contact Standard: Ag
Optional: Ag gold-plated (Au),
suitable for DDC applications: 24 VDC; 0.02 A

LGW…A4/2
Housing base Diecast aluminum
Hood Extrusion cast zinc, powder-coated
Switch Polycarbonate
Diaphragms NBR
Switching contact Standard: Ag
Optional: Ag gold plated (Au),
Suitable for DDC applications: 24 VDC; 0.02 A

Switching voltage Ag contact AC eff. min. 24 V max. 250 V

DC min. 24 V max. 48 V
Au contact DC min. 5 V max. 24 V

Nominal current Ag contact AC eff. 10 A

Au contact DC 20 mA

Switching current Ag contact AC eff. min. 20 mA max. 6 A bei cos ϕ 1

AC eff. min. 20 mA max. 3 A bei cos ϕ 0,6
DC min. 20 mA max. 1 A
Au contact DC min. 5 mA max. 20 mA

Electrical connection Standard at screw terminals via M20 x 1.5 cable gland

Special design plug connection for line sockets as per

DIN EN 175 301-803, 3-pin with protection contact

Degree of protection LGW…A4 IP 54 as per IEC 529 (EN 60529), (transparent hood)
LGW…A4/2 IP 65 as per IEC 529 (EN 60529), (metal housing)

Adjustment If pressure increases in vertical installation position.
Optionally adjustment for rising or falling pressure possible on site.
If installation position deviates, note change in switch point.

Setting tolerance ±15% switch point deviation referred to reference value and installation in verti-
cal position.

Reference value setting device Standard: blue

Version "Y": Yellow

3…6
 Dimensions [mm]

LGW… A4 LGW… / …A4

2.5 x 9 dia. deep for equipment plug as per DIN EN 175 301-803

M5 x 15 hex. screw, similar to DIN EN ISO 4762

for M4x 4.2 screws as per ISO 1207, 912

18,5
58,6

M5 hex. nut as per DIN EN ISO 10511

G 1/4 pressure connection
10,3

G 1/4 screw plug

37,4

Integrated test nipple, ø 9

pressure connection
G 1/4 pressure connection G 1/8
76
Closure screw,
G 1/4, with sealing ring 53,75 (LK 76)

152

G 1/8 pressure connection G 1/8 pressure connection

Made in Germany 72

M20 x 1.5 or plug-type connetion 4 x ø 4,2

for M4 screws as per ISO 1207 Integrated test nipple, ø 9
for cable socket according to
14.3 x 2.4 O ring
DIN EN 175 301-803

LGW… A4/2 LGW… A4/2

with metal housing, with metal housing, plug-in connection for
cable gland M 20 x 1.5 sockets accord. to DIN EN 175 301-803
66,8

66,8
10,3
37,4

10,3
37,4

Integrated test nipple ø 9

Screw plug,
G 1/4, with sealing ring integrated test nipple ø 9 Screw plug G 1/4 with sealing ring

Closure screw with:

1.0 slot Screw plug with slot 1.0
cross slot

Pressure
connection G 1/8 pressure
connection G 1/8
77
4 self-aligning pan-head screws
M3x14 53,75 77
0.8 slot and DIN 7962-Z.2 Phillips head ø 4,2 - 0,2 4 self-tapping cylinder bolts M3x14 53,75
+
slot 0.8 and cross slot to DIN 7962-Z2 ø 4,2 - 0,2
+
38,5

38,5
114

Pressure connection,
G 1/4, for gas or air
G 1/4 pressure connection
gas or air

Installation position α

Standard installation position

When installed horizontally, the pressure switch switches at a pressure

higher by approx. 0.5 mbar
α
α

When installed horizontally overhead, the pressure switch switches

at a pressure lower by approx. 0.5 mbar

When installed in an intermediate installation position, the pressure

switch switches at pressure deviating from the set reference value by
max. ± 0.5 mbar.
α
4…6
 Designation
GW 500 A4 Ag-M-MS9-V0-VS3
��
Pressure connection
V0 Pressure connection G 1/4
position 0
V3 Pressure connection G 1/4
position 3
Verschlußschraube
VS0 Verschlußschraube an
Position 0

� � � VS3 Verschlußschraube an
Position 3
Pressure connection
V0 Pressure connection G 1/4
Made in Germany
position 0

Meßstutzen nur GW 500 A4 (600 mbar)

MS3 Meßstutzen an Position 3
MS9 Meßstutzen an Position 9
M9 Meßstutzen, offen. Position 9

� Electrical connection
M Cable gland M20 x 1,5
G3 Equipment plug
Contact material
Ag silver

Order example
Au silver, gold-plated

Adjustment ranges [mbar]

Pressure switch design GW 500 A4 100-500

LGW…A4 differential pressure switch

Setting range Pressure switch type
GW…A4 Clear cover, PC, (IP 54)
30 - 150 mbar Pressure switch switches when the
pressure exeeds or drops below the
Contact material adjusted setpoint.

Ag GW…A4/2 Metal housing, powder-coated (IP 65)

Differential pressure switch switches when
the pressure exeeds or drops below the
Electrical connection adjusted setpoint.

Cable gland M20 x 1.5

Test nipple 12
MS 9
Pressure connection G 1/4
V0-VS3; at position 0 and position 3
with closure screw 9 0 3
LGW 150 A4 [Ag-M-MS9-V0-VS3]
Made in Germany

Accessories for 6 Order No.

LGW…A4 pressure switch

Kit: G3 equipment plug, 3-pin + E 219 659

Line sockets, 3-pin + E 210 318

grey GDMW

G 1/4 test nipple 230 398

and seal ring (5 x)

G 1/4 screw plug 230 396

and seal ring (5 x)

Double pressure switch mounting kit (not for /2-version) 213 910

Metal mounting bracket 230 288

G 1/4 screw-in glands, only for air 230 279

G 1/8 screw-in glands, only for air 230 278

Mounting kit glowlamp , 230 V yellow 231 773

Mounting kit glowlamp, 120 V yellow 231 772

Mounting kit display-LED, 24 V yellow 231 774

Mounting kit glowlamp, 230 V green 248 239

5…6 Mounting kit display-LED, 24 V green 248 240

 Differential pressure switches
for air, flue and exhaust gases
Pressure switch for gas

LGW…A4
LGW…A4/2

Technical Summary 1 mbar = 100 Pa = 0.1 kPa ≈ 10 mm WS 1 Pa = 0.01 mbar ≈ 0.1 mm WS

Model Version Order No. Setting range Degree of Differential pressure

[Ag-M-MS9-V0-VS3] [mbar] protection switch ∆p [mbar]

LGW…A4 LGW 3 A4 221 590 0,4 - 3 IP 54 ≤ 0.3

Differential LGW 10 A4 221 591 1 - 10 IP 54 ≤ 0.5
pressure LGW 50 A4 221 592 2,5 - 50 IP 54 ≤ 1
switch LGW 150 A4 221 593 30 - 150 IP 54 ≤ 3
Supplied in colletive packaging

Model Version Order No. Setting range Degree of Differential pressure

[Ag-M-MS9-V0-VS3] [mbar] protection switch ∆p [mbar]

LGW…A4/2 LGW 3 A4/2 232 041 0,4 - 3 IP 65 ≤ 0.3

Differential LGW 10 A4/2 232 046 1 - 10 IP 65 ≤ 0.5
pressure LGW 50 A4/2 232 048 2,5 - 50 IP 65 ≤ 1
switch LGW 150 A4/2 232 050 30 - 150 IP 65 ≤ 3
Supplied in separate packaging

Model Version Order No. Setting range Degree of Differential pressure

[Ag-G3-MS9-V0-VS3] [mbar] protection switch ∆p [mbar]

LGW…A4/2 LGW 3 A4/2 232 716 0,4 - 3 IP 65 ≤ 0.3

Differential LGW 10 A4/2 232 717 1 - 10 IP 65 ≤ 0.5
pressure LGW 50 A4/2 232 718 2,5 - 50 IP 65 ≤ 1
switch LGW 150 A4/2 232 719 30 - 150 IP 65 ≤ 3
Supplied in separate packaging including line socket

Model Version Order No. Setting range Degree of Differential pressure

[Y-Ag-M-MS9-V0-VS3] [mbar] protection switch ∆p [mbar]

LGW…A4 LGW 3 A4 Y 242 864 0,4 - 3 IP 54 ≤ 0.3

Differential LGW 10 A4 Y 242 865 1 - 10 IP 54 ≤ 0.5
pressure LGW 50 A4 Y 242 866 2,5 - 50 IP 54 ≤ 1
switch LGW 150 A4 Y 242 867 30 - 150 IP 54 ≤ 3
Supplied in colletive packaging

We reserve the right to make any changes in the interest of technical progress.
Head Offices and Factory Postal address
Karl Dungs GmbH & Co. KG Karl Dungs GmbH & Co. KG
Siemensstraße 6-10 Postfach 12 29
D-73660 Urbach, Germany D-73602 Schorndorf, Germany
Telefon +49 (0)7181-804-0 e-mail info@dungs.com
Telefax +49 (0)7181-804-166 Internet www.dungs.com 6…6