Series 47K Gas Sensor

Remote Combustible Gas Detection

Because every life has a purpose…

Broad range of sensors and accessories

MSA remote sensors, Series 47K, are designed to detect potentially A complete range of accessories for calibration, environmental
hazardous concentrations of flammable gas and vapour in air. protection, sampling and duct mount ing makes it suitable for
A cost effective range of sensors for detecting up to 100 % LEL virtually all applications in combustible gas detection.
including Poison Resistant and High Temperature versions. Series 47K sensors used in combination with MSA Controllers fully
Series 47K sensors are available with either Ex d – 3/4” NPT or meet the requirements of ATEX Directive 2014/34/EU, including
Ex e – M25 junction boxes. performance, and being SIL 2 capable they can be used as part of a
safety related system.

Features & Benefits Sensor Types

• 0–100% LEL MSA sensors are available as standard in a stainless steelbody.
• Ex e junction box with M25 cable gland thread Series 47K-PRP: high resistance to atmospheres containing silicones,
• Ex d junction box with 3/4” NPT cable gland thread lead, sulphur compounds and halogenated hydrocarbons over a
• Poison Resistant (PRP) and High Temperature (HT) versions temperature range –40 °C to +90 °C
• Suitable for use in safety related systems (ATEX 2014/34/EU)
• 3 or 5 wire connection Series 47K-HT: to operate over a temperature range
• Stainless steel body –40 °C to +160 °C
• Complete range of accessories
• Fast response time
• Excellent performance cost ratio
• Safety Integrity Level – SIL 2

Installation & Operation

The number and location of sensors is important to achieve the most • Location of potential sources of a gas leak
reliable detection of flammable gas or vapour. There are several • Location of potential sources of ignition
factors to be considered before installing the sensor. • Ventilation and airflow patterns
(See also EN 60079-29-2 “Guide for selection, installation, use and maintenance of apparatus for • The gas or vapour density with respect to air
the detection and measurement of combustible gases or oxygen”) • The physical properties of the gas or vapour
• Structural arrangements which could allow gas to accumulate
• Environmental conditions

Applications
• Chemical & Petrochemical Industry
• Printing Industry
• Pipelines
• Gas Industry
• Refrigeration Industry
• LPG Storage and Transportation
• Shipboard
• Paint Manufacture
• Solvent Recovery & Storage
• Loading-Unloading of Hazardous Gas & Vapour
• Automotive Test Benches
• Boiler Rooms
• Turbine & Compressors
• Biofuels
Accessories
There are applications where the sensors cannot be installed close to the potential source of a gas
or vapour leak. This may be due to extremely high temperature, higher or lower atmospheric
pressure, difficult to access locations, high flow-rate of air to be monitored or the presence of dust.
For these applications, MSA offers a variety of accessories such as flowthrough adaptors or duct
mount flanges, which allow reliable, trouble-free detection with minimum maintenance.
Additional accessories are available for environmen tal protection and a remote/in-situ calibration
kit for ease of maintenance.

47K 3/4” NPT

Measuring Principle
The MSA 47K Series of sensors operate on the principle of cata lytic combustion. The sensing
element consists of a pair of filaments (“pellistors”) connected to a pair of precision resistors to
form a Wheatstone bridge. One of the filaments, the detector, is coated with a catalyst, whilst the
other, the compensator is used as a reference to achieve the best stability.
The gas or vapour diffuses through a porous Stainless Steel sintered disc, which acts as a flashback
arrestor. When gas comes into contact with the surface of the detector filament, it is oxidised.
The heat generated by the reaction increases the temperature of the detector, which results in a
change of the detector electrical resistance, and hence an unbalance of the Wheatstone bridge.
The result is an output signal directly proportional to the concentration of the flammable gas or
vapour.
47K M25 x 1.5

Approvals Detector Compensator

The Series 47K sensors are “performance” approved according to EN 60079-29-1
when operated in conjunction with an MSA type approved Controller. They can
therefore be used as safety related devices meeting the requirements of ATEX
Directive 2014/34/EU.
The sensors are ATEX approved according to new standards EN 60079-0,
EN 60079-1, EN 60079-31 for use with or without an Ex d or Ex e certified
juncion box.
Series 47K sensors are also certified SIL 2 capable by TUV.
3

EC Type Certificate: EXAM Test Reports:

EX II 2G INERIS 03ATEX 0208 PFG-41300204P/NI 47K-PRP
Ex d IIC T6 –40 °C +40 °C PFG-41300204P/NIII 47K-HT
Ex d IIC T4 –40 °C +90 °C
Ex d IIC T3 –40 °C +160 °C (HT)
HT sensor and wall
EX II 2D INERIS 03ATEX 0208 mount bracket

Ex tb III B IP6X T 85 °C –40 °C +40 °C

Ex tb III B IP6X T 135 °C –40 °C +90 °C
Ex tb III B IP6X T 200 °C –40 °C +160 °C (HT)

MSAsafety.com/detection
 Technical Specifications Ordering Information
Sensor Gas Detector (Sensor & Junction Box)
Power consumption 1 watt typical Junction
Sensor
Measuring range 0–100 % LEL Part-No. Description Box Type
Material
Thread
Response time ₅₀ ≤10 sec. ₉₀ ≤30 sec.
10114106 S47K-PRP, screw St.St. 316 M25 x 1.5 Ex e
Operating life 3 years minimum in clean air @ STP S47K-PRP, screw,
10123076 St.St. 316 M25 x 1.5 Ex e
Storage life 5 years minimum in MSA container @ STP calibrated
Storage temperature –20 °C to +40 °C 10114109 S47K-PRP, spring St.St. 316 M25 x 1.5 Ex e
–40 °C to +55 °C (PRP) S47K-PRP, spring,
10123095 St.St. 316 M25 x 1.5 Ex e
Operating temperature range –40 °C to +90 °C (extended range*) calibrated
–40 °C to +160 °C (HT) 10114107 S47K-PRP, screw St.St. 316 3/4” NPT Ex d
Operating humidity range 5 % to 95 % RH non-condensing S47K-PRP, screw,
10178834 St.St. 316 3/4” NPT Ex d
Operating pressure range 100 ±20 kPa calibrated
0 – 6 m/s 10114110 S47K-PRP, spring St.St. 316 3/4” NPT Ex d
Air velocity S47K-PRP, spring,
(with duct mount flange 0.5 – 20 m/s) 10178833 St.St. 316 3/4” NPT Ex d
PRP sensor only: 10 ppm HMDS for 40 min. calibrated
Poison resistance
(max. signal loss 5% of reading)
Weight ca. 230 g (St.St. sensor) Sensor
Dimension Ø 36 x 56 mm Part-No. Description Material Thread
Material Stainless steel 10147542 47K-HT-PRP St.St. 316 3/4” NPT
Accessory thread M36 x 1.5 mm 10048118 47K-PRP St.St. 316 M25 x 1.5
Sensor to junction box 3/4” NPT or M25 x 1.5 mm 10147537 47K-HT-PRP St.St. 316 M25 x 1.5
EU Type Certificate: 10048272 47K-PRP St.St. 316 3/4” NPT
Approvals
II 2GD INERIS 03 ATEX 0208
Safety Integrity Level SIL 2 (IEC 61508) Junction Box & Wall Mount Bracket
*Extended range: The sensor extended temperature range is greater than the maximum specified in Part-No. Description Material
EN 61779-1-4. It is therefore strongly recommended that if used above +55 °C the sensor is calibrated at the 10114111 Ex e, 2 x M25 x 1.5 Aluminium
operating temperature.
10114112 Ex d, 2 x 3/4” NPT Aluminium
Junction Box 10048829 Wall mount bracket Ø 25 mm St.St. 316
Flameproof Increased safety 10151980 HT junction box 100 °C Aluminium
(Ex d) (Ex e)
Weight 870 g 813 g Accessories
Cable gland thread 3/4” NPT M25 x 1.5 mm Part-No. Description Material
Terminals 5 x 2.5 mm² 5 x 2.5 mm² 10049316 Calibration cap PVC
Material Aluminium (powder coated) 10051623 Weather protection cap – hose St.St. 316
Dimension 120 x 97 x 170 mm (W x D x H) 10051731 Weather protection cap – 1/8 NPT St.St. 316
Approvals EU Type Certificate: BVS 10 ATEX E 066X 10051625 Flow-through adapter St.St. 316
Ex db IIC T6 or T4 Gb Ex e II T6 or T4 10051626 Flow-through adapter Aluminium
Ex tb IIIB T85°C or T135°C 10112790 Duct mount flange St.St. 316
T6 –50 °C ≤ Ta ≤ +40 °C
T4 –50 °C ≤ Ta ≤ +80 °C
T85 °C –50 °C ≤ Ta ≤ +40 °C
T135 °C –50 °C ≤ Ta ≤ +80 °C

Flow-through adapter Calibration cap Weather protection cap

Your direct contact
Great Britain
Hopton Park, Devizes
Wiltshire, SN10 2JP
United Kingdom
Phone +44 (0)800 066 2222
info.gb@MSAsafety.com

Duct mount flange

For contact details of your local MSA affiliate, please visit our website.

Subject to change without notice

ID 07-240.2 UK/12 MSAsafety.com/detection