Perkins 1004-42

New 1000 Series 1004-42
Diesel Engine – 45.0 kWm 1500 rev/min

ElectropaK 51.5 kWm 1800 rev/min
Renowned throughout the
power generation industry for
their superior performance and
reliability, the latest Perkins
1000 Series diesel ElectropaK
easily satisfies the requirements
of US EPA mobile off-highway
legislation and TA Luft
regulations.
The 1004-42 is a compact,

naturally aspirated, 4 cylinder,
larger capacity member of the
family. Premium design features
ensure economic and durable
operation while providing the ideal
characteristics for electrical power
generation.
Clean, efficient power Durable power Economic power

• Operator and environmentally • Maximum cooling efficiency is • Single side servicing and up to
sensitive with low noise, rapid startability provided by a high capacity water 500 hour oil and filter change reduces
and low emissions satisfying US EPA pump. service time, cost and enhances
mobile off-highway legislation and TA Luft equipment availability.
requirements. • Leak free operation is ensured by
Viton crankshaft seals and • Perkins advanced Fastram
sophisticated controlled swell joints, combustion system ensures high power
Reliable power
giving protection in the toughest with low specific fuel consumption and
• Suitable for operation in ambient conditions. very low levels of noise.
temperatures up to 46°C if a canopy is
fitted. • Inserted valve seats enhance
engine life.
• Fuelled starting aid for quick starting at
temperatures down to -25°C.
• Wherever a Perkins’ ElectropaK

engine is put into service, it will never be
far from the support provided by a global
network of 4000 distributors and dealers,
all backed by a parts distribution centre
giving 24 hour service, 365 days a year.
Engine Type of Typical Generator Engine Power
Speed Operation Output (Net) Gross Net
rev/min kVA kWe kWm bhp kWm bhp
1500 Prime power 46.5 37.0 42.0 56.5 41.0 55.0

Standby power 50.5 40.5 46.0 61.5 45.0 60.5
1800 Prime power 53.0 42.5 48.0 64.5 47.0 63.0

Standby power 58.0 46.5 53.0 71.0 51.5 69.0
All ratings data based on operation under ISO 3046 conditions using typical fan sizes and drive ratios. For operation outside of these conditions please consult your
Perkins Engines contact. Performance tolerance quoted by Perkins is ±5%.
Electrical ratings assume a power factor of 0.8 and a generator efficiency of 90%.
Rating Definitions
Prime power – Power available at variable load in lieu of main power network. An overload of 10% is permitted for one hour in every twelve hours of operation.
Standby power – Power available at variable load in the event of a main power network failure. No overload is permitted.
New 1000 Series 1004-42
Standard ElectropaK
Specification ElectropaK General Data
• Base engine Number of cylinders 4
• Cast iron SAE 3 flywheel housing Cylinder arrangement Vertical, in-line
Cycle 4-stroke
• Flywheel
Induction system Naturally aspirated
• Flat bottomed pressed steel sump Combustion system FASTRAM Direct injection
• Mechanical governor – speed control to Cooling system Water-cooled
Displacement 4.23 litres
ISO 3046-4 (BS 5514) Class A1
Bore and stroke 103.0 mm x 127.0 mm
• Rotary fuel injection pump Compression ratio 18.5:1
• 12V shut off solenoid – energised to run Direction of rotation Clockwise, viewed from the front
• Cold start aid Firing order 1,3,4,2
Total lubrication
• Spin-on full flow fuel oil filter
system capacity 6.8 litres
• Fuel pre-filter Coolant capacity
• Spin-on full flow oil filter (inc radiator) 14.7 litres
• Thermostat controlled cooling system Total weight (dry) 439 kg
Total weight (wet) 460 kg
• High flow water pump
• Fan drive and 19″ pusher fan
• Radiator (and piping) Fuel consumption litres/hour (gallons*/hour)
• Fan guards Power rating % 1500 rev/min 1800 rev/min
110 12.2 (2.7) 13.9 (3.7)
• Front engine mountings
100 10.6 (2.3) 12.7 (3.4)
• 12V engine alternator
75 8.1 (1.8) 9.5 (2.5)
• 12V starter motor
50 5.6 (1.2) 6.9 (1.8)
• Air filter * @ 1500 UK
• Oil pressure switch @ 1800 US
• Coolant temperature switch
Optional Equipment
• 24V alternator
• 24V starter motor 911 mm
• Water temperature gauge and sender

• Heater/starter switch
• Rear engine mountings
1023 mm 611 mm
• Workshop manual
Publication No. 1516/9/98 Printed in England by Fisherprint Ltd © Perkins Engines Company Ltd 1998
1173 mm
• Parts book
• User handbook
Distributed by
Perkins Engines Company Limited

Peterborough PE1 5NA UK
Telephone +44 (0)1733 583000
Fax +44 (0)1733 582240
www.perkins-engines.com
All information in this document is substantially correct at the time of
printing but may be altered subsequently by the company.

Perkins 1004-42

Uploaded by

Copyright:

Available Formats

Perkins 1004-42

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Perkins 1004-42

Uploaded by

Copyright:

Available Formats

New 1000 Series 1004-42

Diesel Engine – 45.0 kWm 1500 rev/min

The 1004-42 is a compact,

Clean, efficient power Durable power Economic power

• Wherever a Perkins’ ElectropaK

1500 Prime power 46.5 37.0 42.0 56.5 41.0 55.0

1800 Prime power 53.0 42.5 48.0 64.5 47.0 63.0

• Coolant temperature switch

• Water temperature gauge and sender

Perkins Engines Company Limited

You might also like