SPECIFICATION DATA

Safety System Software (S3)

APPLICATION
Safety System Software (S3) is a robust, full featured
configuration, diagnostic, programming and real-time
monitoring package for integrators and end users.

In addition, by utilizing its integral OPC (OLE for Process

Control) server option, a wide variety of status and
diagnostic information can be shared with DCS, PLC,
and many other compatible systems.

This data sheet covers the specific use of this robust

software tool with Det-Tronics Eagle Quantum Premier®
(EQP) systems.

FEATURE
• Project based development environment for
• Supports multiple simultaneous connections. managing multiple projects.

• Automatic serial port configuration: baud rate, data • Printing of comprehensive project documentation.
bits, stop bits, parity.
• Integral project backup / restore utility.
• Support for previous generations of Det-Tronics
hardware, consult factory for details. • Logging of changes to device configurations, alarm
setpoints, downloads, etc.
• Available OPC 2.03 Data Access Server.

• Complete logic programming and simulation DESCRIPTION

environment for Eagle Quantum / Premier fire & gas
systems. S3 provides a full featured data acquisition, display and
configuration package.
• Complete field device programming environment for
Eagle Quantum / Premier systems. With specific support for the EQP system, it provides
all of the tools needed to ensure accurate system
• Monitors up to 120,000 unique events / alarms. configuration and to enable quick and easy access to
relevant information.
• Event logging to screen, disk and printer.

• Single window view of data from a variety of

sources.

• Multi-level security for up to 64 unique accounts.

4.1 ©Detector Electronics Corporation 2019 1 02/19 90-1179

SYSTEM CONFIGURATION
The S3 database contains all of the information needed
for easy and accurate configuration of any Det-Tronics or
third party device that can be used on the EQP system.

Logic Editor Window

As shown in the example below, an “input” is being

LON Overview Window
selected. Clicking on the tag name for any device on
the EQP LON (Local Operating Network) expands the tag
name to display any available data that can be linked to
the logic.
System and device configuration is graphically presented
with all pertinent information and user selectable options
readily available from the point configuration screen.

LOGIC EDITOR
S3 provides an object-based graphic development
environment for the creation of gas detection, fire
detection, fire suppression and annunciation logic when
used with the EQP system.
Logic is created with an IEC-61131-3 style editor utilizing
a library of logic functions that match the capabilities of
the EQP controller.
These logic “drawings” become both the documentation
and the program. Input Selection Window
With this user friendly and powerful tool, virtually any
conceivable logic can be quickly and easily created,
tested and deployed. Color coded blocks to the left of the data indicate the
data-type; B for Boolean, F for Floating Point etc. In this
One key feature is that “linking” logic connections to field example, the boolean value “High Gas Alarm” is selected
device inputs and outputs doesn’t require any knowledge from the device named ECL-016.
of the controller’s internal addressing.
Simply make the appropriate selection, click on the “OK”
Simply “double-click” on an input or output block on the button and the connection is complete.
drawing and a “browser” style selection dialog box is
provided. An extensive online help library is only as far away as the
F1 key or “Help button” to answer any questions on using
the features of the logic editor, or to determine the syntax
or use of any of its logic elements.

4.1 2 90-1179
LOGIC SIMULATOR PRE-BUILT POINT DISPLAYS
Below is a sample screen showing the logic simulator S3 provides “Point Displays” for all EQP intelligent field
in use. Using the same logic drawings created in the devices. These point graphic screens organize and
logic editor, S3 allows logic to be simulated without being display information in an easy to read format. The
attached to the control system. Simply point and click on example below shows the information for an intelligent
inputs to toggle their state and watch the logic flow. infrared hydrocarbon gas detector.

Logic Editor Window Point Display

Latches are set, timers and counters function, and logic In this display, a mix of discrete and analog data is
flows from page to page until outputs are generated. shown with the process related Alarm History and
This powerful feature can be a tremendous time saver, Analog Input Track in the top section, discrete diagnostic
since it allows for complete logic de-bugging from the information about the field device in the center section,
computer prior to connection to the system. and calibration history in the bottom section.
S3 provides a variety of point displays that are tailored
to the unique requirements of each instrument type
ONLINE MONITOR —instruments such as gas detectors, optical flame
When connected to the system Controller, the logic detectors, supervised input and supervised output
diagrams can be viewed in an “online monitoring” mode devices.
where the current state of all logic is dynamically shown. On devices with an analog process variable, like gas
Using the same format as the simulator shown above, the detectors, a one minute running trend is provided
monitor displays the “real-time” logical and calculated superimposed over the low and high alarm setpoints.
values at the output pins of all input and logic gates. On certain devices calibration history is also available
and is shown both in a “numeric table” and “XY Plot”
graphic form.

CONNECTIVITY
Full and easy communication between systems is a
cornerstone of today’s modern automation, control and
safety system strategies. It’s no longer acceptable for the
safety systems to be isolated from the larger plant-wide
systems and seamless integration into these systems is
fast becoming a requirement. To accomplish this, S3 is
available with an OPC server which enables connectivity
to a variety of modern platforms.

4.1 3 90-1179
 Any or all tags can easily be “Activated” for access
by any OPC compliant client by selecting the tag and
then choosing the “Activate” button in the “OPC Server
Configuration” dialog box.
EQP devices contain more than a single data value and
detailed information on the OPC data available for any Tag
OPC is an industry standard created with the collaboration
can be viewed by selecting the Tag and then choosing
of a number of leading worldwide automation and
the “Properties” button which opens a “Property Viewer”
hardware/software suppliers working in cooperation with
showing this data.
Microsoft®. The organization that manages this standard
is the OPC Foundation. The Foundation has over 220
Although the EQP does have “legacy” connectivity via
members around the world, including nearly all of the
an onboard Modbus-RTU communication port, using
world’s major providers of instrumentation and control
S3 with its optional OPC Server eliminates the need for
systems.
the Host system programmer to know anything about
the controller’s internal memory structures (i.e. Modbus
The OPC option for S3 simplifies the transfer of safety
memory maps). Integration becomes a simple matter
system data from many sources to distributed control
of knowing what “Tagname” is needed and then
systems or other OPC compliant systems. S3 is an
browsing the OPC database for the required data to
“OPC Version 2.03 Data Access Server” and can make
“link” into the host system.
available, with user configuration, any information that is
tracked by the S3 event handling database.

OPC Server Configuration Window

OPC Property Viewer Window

The S3 OPC Server implementation is simple to configure.

As devices are added to the EQP configuration database,
the device tagnames along with all of the alarm and event
tracking for these devices are automatically transferred
into the OPC Server database, where it is stored under
the device’s tagname.

4.1 4 90-1179
HARDWARE REQUIREMENTS ORDERING INFORMATION
Windows 10 operating system and computers operating Det-Tronics has the engineering and project management
on a 64 bit platform are fully supported. As with many expertise to configure and manage a custom system
modern programs, the faster the machine, the better the designed to meet your needs.
performance.
For additional information about the use of S3 for Eagle
Minimum requirements: Quantum Premier, Modbus RTU, Triconex V9, or for
• 256 MB of physical memory. Det-Tronics typically assistance in ordering a system to meet the needs of
provides a minimum of 512MB of physical RAM in its a specific application, please contact us through our
OIS installations. Corporate Offices or a Regional System Solution Center.
• Thousands of colors (16 bit) with a minimum display
resolution of 1024 pixels wide by 768 pixels (XGA).
Software support for touchscreens is included.
• CD-ROM drive required.
• 50 MB free hard disk space required.
• Communication is possible with some systems via
a single or redundant Ethernet connection. Each
network card must have a separate, fixed, TCP/IP
address.
• S3 is designed to work with a serial version of the
Okidata ML490 four color, tractor feed, dot matrix
printer.

4.1 5 90-1179
 ­Corporate Office
6901 West 110th Street | Minneapolis, MN 55438 USA
Specifications subject to change without notice.
Operator: 952.941.5665 or 800.468.3244
All trademarks are the property of their respective owners. Customer Service: 952.946.6491 or 800.765.3473
© 2019 Detector Electronics Corporation. All rights reserved. 5 www.det-tronics.com | Email: det-tronics@det-tronics.com