NET HORSEPOWER 66 kW 88 HP @ 2.200 rpm OPERATING WEIGHT 13.000 kg BUCKET CAPACITY max.

0,8 m

PC130-7
PC

130

Hydraulic Excavator

PC130-7

PC130-7

HYDRAULIC EXCAVATOR

WALK-AROUND
The PC130-7 is a rugged, productive, all-European machine. Designed and expressly built for European markets, it delivers productivity, reliability and operator comforts in a robust, environmentally-friendly package. Komatsus exclusive, on-board, HydrauMind system assists in all operations, providing enhanced machine performance thats always perfectly matched to the task.

Whats new on Dash 7:

Higher stability Low fuel consumption Easier maintenance and serviceability Improved operator comfort Lower noise Meets EC Stage II emission regulations

High productivity and low fuel consumption

The powerful turbocharged and air-to-air aftercooled Komatsu SAA4D95LE-3 provides 66 kW/88 HP. Productivity has increased with greater output in the Active mode, while fuel efciency has been further improved.

Flexibility
The PC130-7 is standard equipped with an additional circuit to handle a wide variety of attachments.

High stability
Lateral stability and lifting capacity have been improved by increasing the track length on ground and the width of gauge, compared to the Dash 6 model.

Excellent reliability and durability

Reinforced work equipment Reliable major components designed and built by Komatsu Exceptionally-reliable electronic devices

HYDRAULIC EXCAVATOR

PC130-7
NET HORSEPOWER 66 kW 88 HP OPERATING WEIGHT 13.000 kg BUCKET CAPACITY max. 0,8 m

Easy maintenance
Remote-mounted engine oil lter, for easy access Standard-equipped water separator Easier radiator cleaning due to new side-by-side oil cooler and radiator

SpaceCab
The new PC130-7s cabin space has been increased by 14%, offering an exceptionally-roomy operating environment. Sealed and pressurised cab with standard climate control Low-noise design Low-vibration design with cabin damper mounting OPG Level I (ISO) compliant cabin

In harmony with the environment

The low emission engine meets EC Stage II emissions standards with increased power and machine productivity The economy mode reduces fuel consumption Low operating noise Designed for easy end-of-life recycling

PC130-7

HYDRAULIC EXCAVATOR

WORKING ENVIRONMENT
PC130-7s cab interior is spacious and provides a comfortable working environment

SpaceCab
Comfortable cab
The new PC130-7 inner cab volume is 14% greater than the Dash 6, offering an exceptionally comfortable operating environment. The large cab enables the seat, with headrest, to be reclined to horizontal.

Pressurised cab
The standard-equipped climate control, air lter and a higher internal air pressure resist dust entry into the cab.

Low-noise design
Noise levels are substantially reduced; engine noise as well as swing and hydraulics operations noise.

Cab damper mounting for low vibration levels

PC130-7 uses a new and improved viscous damping cab mount system that incorporates a longer stroke plus an added spring. The new cab damper mounting, combined with strengthened left and right-side decks, aids the reduction of vibrations to the operators seat.

Outer air lter Easy removal/installation of the air conditioner lter element, without tools facilitates easier cleaning.

Riding comfort comparison

Cab damper mounting Multi-layer viscous mount
Conditions: Travelling over obstacle one side track High-speed forward travel

Rubber Spring

Silicon oil

Floor vibration

Vertical pitch oscillation on the graph shows the intensity of vibration

Roof hatch

12-Volt power supply

Climate control

Bottle holder and magazine rack

HYDRAULIC EXCAVATOR

PC130-7

Safety features
Multi-position controls
The multi-position, proportional pressure control levers allow the operator to work in comfort whilst maintaining precise control. A double-slide mechanism allows the seat and controllers to move together, or independently, allowing the operator to position the controllers for maximum productivity and comfort. Hot and cool box

Improved, wide visibility

The right side window pillar has been removed and the rear pillar reshaped to provide greater visibility. Blind spots have been decreased by 34%.

Pump/engine room partition

This prevents hydraulic oil from spraying onto the engine to reduce the risk of re.

Thermal and fan guards

Are placed around high-temperature parts of the engine. The fan belt and pulleys are well protected.

Steps with non-skid surface and large handrail

Steps with non-slip surfacing ensure safer maintenance. 3 button lever Thermal guard

Seat sliding range: 340 mm increased by 120 mm over the Dash 6

Non-slip sheet

Defroster/demister

Large handrail for safe access

PC130-7

HYDRAULIC EXCAVATOR

PRODUCTIVITY FEATURES
Engine
The PC130-7 gets its exceptional power and work capacity from a Komatsu SAA4D95LE-3 engine. Its output is 66 kW/88 HP, providing increased hydraulic power and improved fuel efciency.

High production levels and low fuel consumption

The increased output and fuel savings of the Komatsu SAA4D95LE-3 engine result in increased productivity (tonnes per litre of fuel).

OPG top and front guard

The optional bolt-on OPG (Operation Protection Guard) top guard and front guard are available for operations in jobsites where there is high possibility of falling rocks or debris. OPG level 2 for top and front guard according to ISO 10262.

Self-diagnostic monitor system

The PC130-7 features one of the most advanced diagnostic systems in the industry. Komatsus exclusive system identies maintenance items, reduces diagnostic time, and helps you maintain maximum production.

Working mode A E B L

Application Active mode Economy mode Breaker mode Lifting mode

Advantage Maximum production/power Fast cycle times Excellent fuel economy Optimum engine RPMs and hydraulic ow Hydraulic pressure has been increased by 7%

H I

B C D

J K L M N

E O F G P

A B C D E F G H I J K L M N O P

Engine water temperature Battery charge Engine oil pressure Air cleaner clogging Auto deceleration Travel speed selector switch Working mode selector switch Fuel level User or trouble code display Service hours meter Engine oil level Pre-heat Swing lock display Oil maintenance Window wiper Window washer

HYDRAULIC EXCAVATOR

PC130-7

Excellent reliability and durability

Reliable components
All of the major machine components, such as the engine, hydraulic pump, hydraulic motor and control valves, are designed and manufactured by Komatsu. This guarantees that each component is expressly built for the class and model of machine. This ensures that the engineering, manufacturing standards and testing that go into each component are totally-Komatsu.
Grease

Sturdy frame structure

The revolving frame, centre frame and undercarriage have been designed using the most advanced three-dimensional Computer Aided Design (CAD) and Finite Elements Modelling (FEM) analysis technology.

Grease-sealed track provides excellent undercarriage durability

Highly-reliable electronic devices

Exclusively-designed electronic devices are certied by severe testing. Controller Sensors Connectors Heat-resistant wiring

Metal guard rings

These protect all hydraulic cylinders and improve reliability.

Track link with strut The PC130-7 uses track links with struts, providing superb durability

Harmony with the environment

Low-emission engine
Komatsu SAA4D95LE-3 is EC Stage II compliant, with reduced NOx emissions, compared to the PC130-6.

Easy end-of-life recycling

The PC130-7 is designed with the consideration of endof-life recycling, effectively reducing its environmental impact. All exterior parts are made of steel. Extended engine oil, hydraulic oil and lter replacement intervals reduce environmental impact. All plastic parts are given a material code symbol.

Economy (environment) mode

Economy mode meets the needs of the 21st century. This mode offers the user fuel savings, quiet operation, and less CO2 emissions.

Low noise
Noise has been reduced from the engine as well as from swing and hydraulic operations. The dynamic noise level is just 73 dB(A) at operator ear level (ISO 6369).

PC130-7

HYDRAULIC EXCAVATOR

MAINTENANCE FEATURES
Easy maintenance
Komatsu designed the PC130-7 to have easy service access. By doing this, routine maintenance and servicing are less likely to be skipped. This can mean a reduction in costly downtime later on. Here are some of the many service features found on the PC130-7:

Side-by-side cooling
Since radiator, aftercooler and oil cooler are arranged in parallel, it is easy to clean, remove and install them.

Water separator
This is standard equipment which removes any water that has become mixed with the fuel, preventing fuel system damage.

Easy access to the engine oil lter

The engine oil lteris mounted remotely to improve accessibility.

HYDRAULIC EXCAVATOR

PC130-7

SPECIFICATIONS
ENGINE Model........................................................... Komatsu SAA4D95LE-3 Type .............................. Direct injection, water-cooled, emissionised, turbocharged, after-cooled diesel Rated capacity..................................... 66 kW/88 HP (ISO 9249 Net) at engine speed ..............................................................2.200 rpm No. of cylinders .................................................................................4 Bore stroke .................................................................95 115 mm Displacement...........................................................................3,26 ltr Battery ........................................................................ 2 12 V/65 Ah Alternator............................................................................ 24 V/25 A Starter motor .................................................................. 24 V/3,0 kW Air lter type................................................Double element type with monitor panel dust indicator and auto dust evacuator SWING SYSTEM Type ................................................................................... Hydrostatic Swing lock ........................................................Mechanical disc brake Swing speed ........................................................................0 - 11 rpm

DRIVES AND BRAKES Steering control ........................................ 2 levers with pedals giving full independent control of each track Drive method ..................................................................... Hydrostatic Travel operation ...................................... Automatic 2-speed selection Gradeability .......................................................................... 70%, 35 Max. travel speeds Lo / Hi......................................................................... 2,7 / 5,5 km/h

UNDERCARRIAGE HYDRAULIC SYSTEM Type ............... HydrauMind. Closed-centre system with load sensing and pressure compensation valves Additional circuits.................................1 additional circuit is standard Main pump...................................variable displacement piston pump supplying boom, arm, bucket, swing and travel circuits Maximum pump ow......................................................... 312 ltr/min Relief valve settings Implement ..................................................................... 325 kg/cm Travel............................................................................. 355 kg/cm Swing ............................................................................ 295 kg/cm Pilot circuit....................................................................... 30 kg/cm Construction ...................................................X-frame centre section with box section track-frames Track assembly Type............................................................................... Fully sealed Shoes (each side) ........................................................................ 43 Tension.....................................Combined spring and hydraulic unit Rollers Track rollers (each side) ................................................................. 7 Carrier rollers (each side) .............................................................. 1

COOLANT AND LUBRICANT CAPACITY (REFILLING) Fuel tank.................................................................................... 247 ltr Radiator .................................................................................... 13,4 ltr Engine oil.................................................................................. 11,0 ltr Swing drive ................................................................................. 2,5 ltr Hydraulic tank.............................................................................. 90 ltr Final drive (each side) ................................................................ 2,5 ltr

OPERATING WEIGHT (APPR.) Operating weight, including 4.600 mm one-piece boom, 2,5 m arm, 470 kg bucket, operator, lubricant, coolant, full fuel tank and the standard equipment.

ENVIRONMENT Engine emissions ............................. Fully complies with EC Stage II exhaust emission regulations Noise levels LwA external .............................................102 dB(A) (2000/14/EC) LpA operator ear ....................... 73 dB(A) (ISO 6369 dynamic test)

MONO BOOM
PC130-7 Triple grouser shoes 500 mm 600 mm 700 mm Operating weight 12.600 kg 12.780 kg 12.960 kg Ground pressure 0,39 kg/cm 0,34 kg/cm 0,30 kg/cm

PC130-7

HYDRAULIC EXCAVATOR

MACHINE DIMENSIONS
MACHINE DIMENSIONS A B C D Overall width of upper structure Overall height of cab Overall length of basic machine Tail length Tail swing radius E F G H I J K L Clearance under counterweight Machine tail height Ground clearance Track length on ground Track length Track gauge Track shoe width Overall track width with 500 mm shoe Overall track width with 600 mm shoe Overall track width with 700 mm shoe PC130-7 2.490 mm 2.810 mm 3.925 mm 2.110 mm 2.190 mm 855 mm 1.885 mm 400 mm 2.880 mm 3.610 mm 1.990 mm 500, 600, 700 mm 2.490 mm 2.590 mm 2.690 mm

ARM LENGTH 2.100 mm M N Transport length Overall height (to top of boom) 7.590 mm 2.620 mm

MONO BOOM 2.500 mm 7.595 mm 2.175 mm 2.900 mm 7.510 mm 3.075 mm

10

HYDRAULIC EXCAVATOR

PC130-7

BUCKET OPTIONS & DIGGING FORCES

Specications and equipment may vary according to regional availability

PC130-7
BUCKET AND ARM COMBINATION Width 500 mm 600 mm 700 mm 800 mm 900 mm 1.000 mm 1.100 mm 1.200 mm Capacity SAE 0,25 m 0,32 m 0,40 m 0,48 m 0,56 m 0,64 m 0,72 m 0,80 m Weight 325 kg 350 kg 390 kg 440 kg 475 kg 505 kg 560 kg 620 kg 2.100 mm PC130-7 2.500 mm 2.900 mm

Please consult with your distributor for the correct selection of buckets and attachments to suit the application. The recommendations are given as a guide only, based on typical operating conditions.

Material weight up to 1,8 t/m Material weight up to 1,5 t/m Material weight up to 1,2 t/m Not usable

BUCKET AND ARM FORCE Arm length Bucket digging force (ISO) Bucket digging force at power max. (ISO) Arm crowd force (ISO) Arm crowd force at power max. (ISO) 2.100 mm 8.800 kgf 9.500 kgf 7.200 kgf 7.900 kgf 2.500 mm 8.800 kgf 9.500 kgf 6.300 kgf 6.900 kgf 2.900 mm 8.800 kgf 9.500 kgf 5.700 kgf 6.200 kgf

11

PC130-7

HYDRAULIC EXCAVATOR

WORKING RANGES
MONO BOOM
9 8 7 6 5 4 3 2 1 0 -1 -2 -3

E D C

-4 -5 -6 9 8 7 6 5 4 3 2 1 0

G F

ARM LENGTH A B C D E F G Max. digging height Max. dumping height Max. digging depth Max. vertical wall digging depth Max. digging depth of cut for 2,44 m level Max. digging reach Max. digging reach at ground level

2.100 m 8.345 mm 5.905 mm 5.115 mm 4.520 mm 4.875 mm 7.925 mm 7.795 mm

2.500 mm 8.610 mm 6.170 mm 5.520 mm 4.940 mm 5.315 mm 8.290 mm 8.170 mm

2.900 mm 8.970 mm 6.535 mm 6.015 mm 5.360 mm 5.835 mm 8.785 mm 8.665 mm

12

HYDRAULIC EXCAVATOR

PC130-7

NOTES

13

PC130-7

HYDRAULIC EXCAVATOR

LIFTING CAPACITY
PC130-7 MONO BOOM
A Reach from swing center B Bucket hook height C Lifting capacities, including
bucket (469 kg), bucket linkage (120 kg) and bucket cylinder (83 kg) Rating over front Rating over side Rating at maximum reach When removing bucket, linkage or cylinder, lifting capacities can be increased by their respective weights With 700 mm shoe

7,5 m

6,0 m

4,5 m

3,0 m

1,5 m

Arm length
B

With 700 mm shoe

6,0 m 4,5 m 3,0 m 1,5 m

kg kg kg kg kg kg kg kg

*2.400 *2.250 *2.250 2.200 2.250 2.550 3.300

*2.400 2.000 1.700 1.550 1.600 1.800 2.350 2.950 2.950 2.850 2.750 2.750 2.200 2.150 2.050 2.000 1.950

*3.400 *3.550 *4.350 4.550 4.250 4.150 4.300

*3.400 *3.550 3.450 3.250 3.050 3.000 3.000 *6.000 *8.550 *7.400 8.750 *7.550 *6.000 6.000 5.650 5.600 5.750 *4.750 *8.800 *4.750 *8.800

2.100 mm

0,0 m -1,5 m -3,0 m -4,5 m

469 kg

With 700 mm shoe

6,0 m 4,5 m 3,0 m 1,5 m

kg kg kg kg kg kg kg kg

*1.950 *1.800 *1.850 *1.950 2.050 2.250 2.850 *3.600

*1.950 1.700 1.550 1.450 1.450 1.600 2.050 3.200 2.250 2.200 2.150 1.650 1.600 1.550 3.000 2.950 2.850 2.750 2.700 2.250 2.200 2.100 2.000 1.950 *3.150 *3.950 4.550 4.250 4.250 4.250 *3.150 3.550 3.300 3.000 3.000 2.950 *5.200 *7.900 *8.050 8.700 *8.050 *5.450 *5.200 6.150 5.700 5.600 5.700 *5.450 *4.700 *7.850 *4.700 *7.850

2.500 mm

0,0 m -1,5 m -3,0 m -4,5 m

469 kg

With 700 mm shoe

6,0 m 4,5 m 3,0 m 1,5 m

kg kg kg kg kg kg kg kg

*1.550 *1.450 *1.450 *1.550 *1.750 1.950 2.350 *3.400

*1.550 1.450 1.350 1.250 1.250 1.350 1.650 2.450 *1.950 2.200 2.150 2.100 2.050 1.650 1.650 1.550 1.500 1.450

*2.200 *2.750 2.950 2.800 2.700 2.650 2.600

2.250 2.250 2.200 2.050 1.950 1.850 1.850 *3.450 *4.550 4.300 4.050 4.050 *4.200 *3.450 3.300 3.050 2.900 2.900 3.000 *6.800 8.800 8.550 *8.450 *6.500 6.250 5.650 5.450 5.500 5.650 *4.100 *6.650 *10.350 *4.100 *6.650 *10.350

2.900 mm

0,0 m -1,5 m -3,0 m -4,5 m

469 kg

* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.

14

HYDRAULIC EXCAVATOR

PC130-7

NOTES

15

PC130-7

HYDRAULIC EXCAVATOR

STANDARD EQUIPMENT
Komatsu SAA4D95LE-3 66 kW direct injection emissionised Stage II intercooled turbocharged engine Double element type air cleaner with dust indicator and auto-dust evacuator Automatic fuel line de-aeration Engine key stop Alternator 24 V/25 A Batteries 2 12 V/65 Ah Starter motor 24 V/3,0 kW Electronic closed-centre load sensing (E-CLSS) hydraulic system (HydrauMind) Pump and engine mutual control (PEMC) system 4-working mode selection system; Active mode, economy mode, breaker mode and lifting mode Standard counterweight PowerMax function Auto-deceleration function Automatic engine warm-up system Engine overheat prevention system Fuel control dial PPC control levers and pedals for steering and travel One additional service valve (full ow) Hydrostatic, 2-speed travel system with automatic shift and planetary gear type nal drives, and hydraulic lock service brakes SpaceCab; Highly pressurised and tightly sealed viscous mounted cab with tinted safety glass windows, opening roof hatch with window pull-up type front window with locking device, removable lower window, front window wiper with intermittent feature, ashtray, luggage box, oor mat Parts book and operator manual Lockable fuel cap and covers Fuel supply pump Track frame under-guards 12 Volt power supply Overload warning device Boom safety valves Climate control/Air conditioning Large handrails and rear-view mirrors Cigarette lighter Radio cassette preparation Beverage holder and magazine rack Electric horn Hot and cool box Toolkit and spare parts for rst service Suspension seat with adjustable arm rests and retractable seat belt Standard colour scheme and decals 500 mm triple grouser track-shoes

OPTIONAL EQUIPMENT
600 mm; 700 mm triple grouser track-shoes Mono boom Two-piece boom 2,1 m; 2,5 m; 2,9 m arms Blade assembly OPG Level II top guard (FOPS) OPG Level II front guard (FOPS) Radio cassette Service points Beacon preparation Bio oil Additional cab roof lights Additional boom light Rain visor (not with OPG) Komatsu buckets Arm safety valve Customised paint Track roller guards Larger alternator High capacity batteries

Komatsu Europe International NV

Mechelsesteenweg 586 B-1800 VILVOORDE (BELGIUM) Tel. +32-2-255 24 11 Fax +32-2-252 19 81 www.komatsueurope.com

UESS001200

05/2004

Materials and specications are subject to change without notice. is a trademark of Komatsu Ltd. Japan.

Printed in Europe This specication sheet may contain attachments and optional equipment that are not available in your area. Please consult your local Komatsu distributor for those items you may require. Materials and specications are subject to change without notice.