NPT 1050 Product Note

PRODUCTS Product Note
Your Partner for Growth
NPT-1050
Carrier grade Packet Optical Transport for Metro
Access
 Fully redundant 1U multiservice  Transport grade QoS, resiliency,

packet optical transport OAM and synchronization
 Modular architecture supporting  Minimal power consumption and
lowest TCO for network transition footprint
from TDM to packet  Unified multilayer management
 Enhanced OTN and optical
capabilities
The NPT-1050 is a future-proof and fully Integrated optics support allows the NPT
redundant 1U multiservice packet optical 1050 to work seamlessly with next
transport platform optimized for the metro generation optical networks, making it a
access aggregation and access nodes. powerful Packet Optical Access Platform
(POA).
As a carrier class packet optical transport, it
combines transport network reliability and By supporting the most advanced MEF CE2.0
ease of management with packet efficiency carrier class Ethernet-based services with
and optics scalability in an extremely compact high 10GE fanout, the NPT-1050 is well
1RU enclosure. The NPT architecture provides positioned to support cellular backhaul
cost-effective support for mixed packet and transition/ migration from TDM to Ethernet
TDM traffic while preserving the existing or for a new build-out of LTE and 4G
network structure and work procedures. networks with enhanced packet
Seamless and cost effective transition from synchronization support. The NPT-1050
TDM to packet is achieved by delivering TDM supports full triple play services for
over Ethernet (CES). MPLS Dual-Stack
residential NGN applications. Its unique
(IP/MPLS and MPLS-TP) support guarantees
support of utility targeted interfaces and
seamless interworking with IP/MPLS
networks and service optimized selection, per rugged design make it an ideal solution for
LSP, between IP/MPLS and MPLS-TP. next generation transport networks.
The NPT-1050 is managed by the ECI flagship
unified multilayer NMS - LightSoft®.
Technical Specifications
Services, Synchronization, and Protection
Packet interfaces 10/100/1000 Mbps, 10 GE
Ethernet and MPLS technologies Native Ethernet and MPLS over Ethernet (MoE), MPLS over Transport (MoT), CES SAToP,
CESoPSN
Packet services MEF CE2.0 based E-Line (EPL,EVPL), LAN(EPLAN, EVPLAN) ,E-Tree (rooted multipoint)
(EP-Tree, EVP-Tree), E-Access
Copyright © 2014 ECI Telecom. All rights reserved. Information in this document is subject to change without notice. ECI Telecom assumes no responsibility for any errors that may appear in this document.
MPLS-based services VPWS, VPLS, P2MP Multicast (LSP) Tree
OTN OTU-1, OTU-2
Storage Fibre Channel 1/2/4/8/10
Video SDI, HD-SDI, DVB-ASI
Synchronization SyncE, 1588v2
PCM interfaces FXO, FXS, 2/4W E&M, V24, V35, V36 ,V11, RS422, RS449,C37.94,OMNI , and G.703 64K
over Packet
Protection and restoration IO Hardware protection (IOP) ,G.8032 Ethernet Ring Protection (ERPS), MPLS-TP,FRR,
Dual FRR, 1:1 Linear protection, PW Redundancy, APS
Topologies Mesh, multi-ring, ring, star, linear
System Capacities
Packet throughput 72 Gbps
Max. OTN capacity 120 Gbps
Max. Ethernet/MPLS 52 x 10/100 FE 40 x 100/1000 10 x 10GE
Max. CES 12 x STM-1/OC-3 3 x STM-4/OC-12 144 x E1/T1
Max. OTN 24 x OTU-1, 6 x OTU-2
Max. Storage 24/12/8/3/3 x Fibre Channel 1/2/4/8/10
Max. Video 9 x SDI, HD-SDI, DVB-ASI
Pluggable SFP/CSFP/SFP+ support Electrical, Colored C/DWDM, non-colored, Compact SFP (CSFP), SFP+ and bidirectional
SFPs
HW redundancy For all common units/cards
Other Specifications
Power over Ethernet (PoE+) Up to 30W
Power input -40 VDC to -75 VDC
Power dissipation Typical: 150 W
Operating temperature range -25°C to +70°C (-13°F to 158°F)
Operating RH range 5% to 95%
Environmental standards ETS 300 019-1-3 Class 3.3
Safety ETS 300 019-1-1 Class 1.2
EMC EN 60950/2000, according to LVD Directive 72/23/EEC
EN 60825 -1&2
Security RADIUS (client authentication), SSH 2.0,
SW integrity checking (SHA-2), SFTP, ACL ,IEEE802.1x
Management End-to-end management of all layers and services
and SNMP V3 traps
Physical dimensions NPT-1050 basic unit: (HxWxD) 44 x 465 x 263 (mm) / 1.7 x 18.3 x 10.4 (in.)
Expansion Unit: (HxWxD) 88 x 465 x 263 (mm) / 3.5 x 18.3 x 10.4 (in.)
NPT-1050_PN_NOV_11_2014

NPT 1050 Product Note

Uploaded by

Copyright:

Available Formats

NPT 1050 Product Note

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

NPT 1050 Product Note

Uploaded by

Copyright:

Available Formats

PRODUCTS Product Note

Your Partner for Growth

 Fully redundant 1U multiservice  Transport grade QoS, resiliency,

You might also like