PROJECT-9680

FOUNDATION DESIGN FOR F5 CASE-1

REACTION FROM STAAD
LOAD CASE = 104
NODE NO = 68
Virtecal Load (Fy) = 72.16 KN
Horizontal load (Fz) = 8.45 KN
Laterial load (Fx) = 1.06 KN
Moment (Mx) = 28.68 m-KN
Moment (Mz) = 0.14 m-KN

Column Size = 0.60 x 0.60 mxm

Foundation size = 2.15 x 2.15 mxm
Depth of foundation = 0.30 m
Height of column below FGL = 1.65 m

Total moment M1 = 45.15 m-KN

Total moment M2 = 2.20 m-KN

Weight of column = 17.55 KN

Weight of Foundation = 34.67 KN
Weight of soil over foundation = 130.11 KN
Total weight = 254.49 KN

Gross Bearing Pressure = 83.64 or 26.47

Net bearing pressure = 50.64 KN/m2

S.B.C. = = 225 KN/m2
> Net Bearing Pressure of 50.64 ton/m^2 , O.K.
Design of footing
Maximum moment at face of pedestal, M Ed = 22.81 m-KN
fck = 30.00 N/mm2
fctk = 1.90 N/mm2
fyk = 420.00 N/mm2
Effective depth, d = = 220.00 mm
Required reinforcement, Ast = 298.72 mm2

ყmc = 1.5
ყms = 1.15

fcd = 20.00 N/mm2

fctd = 1.30 N/mm2
fyd = 365.20 N/mm2

Asmin. (0.002 of cross-section area ) = 440 mm2

Hence, provide 12 dia bar @ 250 mm c/c in footing on each face.

= 565 mm2 Hence OK

Stability check
Check against sliding

Resultant sliding force = 8.45 KN

Total dead load = 254.49 KN
Assuming friction coefficient m = 0.45
Total resistance force, Fstab = 114.52 KN
Allowable factor of safety = 1.2
Factor of safety against sliding, FS = 13.56 Hence Safe

Check against overturning

Overturning moment = 45.15 m-KN
Total stabilising moment, Ms = = 273.6 m-KN

Allowable factor of safety = 1.5

Factor of safety against overturning, FS = 6.1 Hence Safe

Checking for Punching Shear shear :-

Punching shear strength Vpr = ყfctdupd (as per equ-8.21 of TS-500)
ყ = 1 (as per equ-8.22 of TS-500)
up = 2.84
Punching shear strength Vpr = 812240.00 N
= 812.24 KN

factored shear force, Vd = 134.56 KN Hence Safe

Checking for One way Shear shear :-

Vcr (as per equ-8.1 of TS-500)

ყ = 0.07

Nd = 0

Vcr = 185900 N
= 185.9 KN

Vd = 28.11 KN
= 28.11 KN

Factored design shear = 42.165 KN Hence Safe

Design of Coulmn/Pedestal

Size of column = 600 x 600

Pu = 72.16 KN

Mx = 2.20 m-KN

Mz = 45.15 m-KN

Provided 12 ᶲ 12 NOS REINFORCEMENT

FOR - X FOR Z
Effective depth of column (d) = 530.00 mm 530 mm

Pu/(FCKbd) = 0.001

Mx/(FCKbd2) = 0.000

Mx/(FCKbd2) = 0.007

from the above values from chart minmum r/f will be required .

Asmin. (0.002 of cross-section area ) = 720

Asprovided = 1357 Hence OK
 PROJECT-9680
FOUNDATION DESIGN FOR F5 CASE-2
REACTION FROM STAAD
LOAD CASE = 101
NODE NO = 67
Virtecal Load (Fy) = 60.05 KN
Horizontal load (Fz) = 0.13 KN
Laterial load (Fx) = 10.00 KN
Moment (Mx) = 0.44 m-KN
Moment (Mz) = 56.49 m-KN

Column Size = 0.60 x 0.60 mxm

Foundation size = 2.15 x 2.15 mxm
Depth of foundation = 0.30 m
Height of column below FGL = 1.20 m

Total moment M1 = 0.64 m-KN

Total moment M2 = 71.49 m-KN

Weight of column = 13.50 KN

Weight of Foundation = 34.67 KN
Weight of soil over foundation = 94.63 KN
Total weight = 202.85 KN

Gross Bearing Pressure = 87.43 or 0.34

Net bearing pressure = 85.03 KN/m2

S.B.C. = = 225 KN/m2
> Net Bearing Pressure of 85.03 ton/m^2 , O.K.
Design of footing
Maximum moment at face of pedestal, M Ed = 38.30 m-KN
fck = 30.00 N/mm2
fctk = 1.90 N/mm2
fyk = 420.00 N/mm2
Effective depth, d = = 220.00 mm
Required reinforcement, Ast = 501.56 mm2

ყmc = 1.5
ყms = 1.15

fcd = 20.00 N/mm2

fctd = 1.30 N/mm2
fyd = 365.20 N/mm2

Asmin. (0.002 of cross-section area ) = 440 mm2 (As per cl 10.3.3 of TS-500)

Hence, provide 12 dia bar @ 250 mm c/c in footing on each face.

= 565 mm2 Hence OK

Stability check
Check against sliding

Resultant sliding force = 10.00 KN

Total dead load = 202.85 KN
Assuming friction coefficient m = 0.45
Total resistance force, Fstab = 91.28 KN
Allowable factor of safety = 1.2
Factor of safety against sliding, FS = 9.13 Hence Safe

Check against overturning

Overturning moment = 71.49 m-KN
Total stabilising moment, Ms = = 218.1 m-KN

Allowable factor of safety = 1.5

Factor of safety against overturning, FS = 3.1 Hence Safe

Checking for Punching Shear shear :-

Punching shear strength Vpr = ყfctdupd (as per equ-8.21 of TS-500)
ყ = 1 (as per equ-8.22 of TS-500)
up = 2.84
Punching shear strength Vpr = 812240.00 N
= 812.24 KN

factored shear force, Vd = 110.33 KN Hence Safe

Checking for One way Shear shear :-

Vcr (as per equ-8.1 of TS-500)

ყ = 0.07

Nd = 0

Vcr = 185900 N
= 185.9 KN

Vd = 47.19
= 47.19

Factored design shear = 0 Hence Safe

Design of Coulmn/Pedestal

Size of column = 600 x 600

Pu = 60.05 KN

Mx = 71.49 m-KN

Mz = 0.64 m-KN

Provided 12 ᶲ 12 NOS REINFORCEMENT

FOR - X FOR Z
Effective depth of column (d) = 530.00 mm 530 mm

Pu/(FCKbd) = 0.001

Mx/(FCKbd2) = 0.011

Mx/(FCKbd2) = 0

from the above values from chart minmum r/f will be required .

Asmin. (0.002 of cross-section area ) = 720

Asprovided = 1357 Hence OK
 PROJECT-9680
FOUNDATION DESIGN OF F1,F2 CASE-1
REACTION FROM STAAD
LOAD CASE = 104
NODE NO = 56
Virtecal Load (Fy) = 106.69 KN
Horizontal load (Fz) = 2.47 KN
Laterial load (Fx) = 0.11 KN
Moment (Mx) = 3.72 m-KN
Moment (Mz) = 0.00 m-KN

Column Size = 0.35 x 0.60 mxm

Foundation size = 1.50 x 1.50 mxm
Depth of foundation = 0.30 m
Height of column below FGL = 1.20 m

Total moment M1 = 7.44 m-KN

Total moment M2 = 0.16 m-KN

Weight of column = 7.88 KN

Weight of Foundation = 16.88 KN
Weight of soil over foundation = 45.29 KN
Total weight = 176.73 KN

Gross Bearing Pressure = 92.05 or 65.04

Net bearing pressure = 89.65 KN/m2

S.B.C. = = 225 KN/m2
> Net Bearing Pressure of 89.65 ton/m^2 , O.K.
Design of footing
Maximum moment at face of pedestal, M Ed = 13.62 m-KN
fck = 30.00 N/mm2
fctk = 1.90 N/mm2
fyk = 420.00 N/mm2
Effective depth, d = = 220.00 mm
Required reinforcement, Ast = 178.28 mm2

ყmc = 1.5
ყms = 1.15

fcd = 20.00 N/mm2

fctd = 1.30 N/mm2
fyd = 365.20 N/mm2

Asmin. (0.002 of cross-section area ) = 440 mm2 (As per cl 10.3.3 of TS-500)

Hence, provide 12 dia bar @ 250 mm c/c in footing on each face.

= 565 mm2 Hence OK

Stability check
Check against sliding

Resultant sliding force = 2.47 KN

Total dead load = 176.73 KN
Assuming friction coefficient m = 0.45
Total resistance force, Fstab = 79.53 KN
Allowable factor of safety = 1.2
Factor of safety against sliding, FS = 32.15 Hence Safe

Check against overturning

Overturning moment = 7.44 m-KN
Total stabilising moment, Ms = = 132.5 m-KN

Allowable factor of safety = 1.5

Factor of safety against overturning, FS = 17.8 Hence Safe

Checking for Punching Shear shear :-

Punching shear strength Vpr = ყfctdupd (as per equ-8.21 of TS-500)
ყ = 1 (as per equ-8.22 of TS-500)
up = 2.34
Punching shear strength Vpr = 669240.00 N
= 669.24 KN

factored shear force, Vd = 171.85 KN Hence Safe

Checking for One way Shear shear :-

Vcr (as per equ-8.1 of TS-500)

ყ = 0.07

Nd = 0

Vcr = 185900 N
= 185.9 KN

Vd = 31.83
= 31.83

Factored design shear = 0 Hence Safe

Design of Coulmn/Pedestal

Size of column = 350 x 600

Pu = 106.69 KN

Mx = 0.16 m-KN

Mz = 7.44 m-KN

Provided 14 ᶲ 12 NOS REINFORCEMENT

FOR - X FOR Z
Effective depth of column (d) = 528.00 mm 278 mm

Pu/(FCKbd) = 0.002

Mx/(FCKbd2) = 0.000

Mx/(FCKbd2) = 0.003

from the above values from chart minmum r/f will be required .

Asmin. (0.002 of cross-section area ) = 420

Asprovided = 1847 Hence OK
 PROJECT-9680
FOUNDATION DESIGN OF F1,F2 CASE-2
REACTION FROM STAAD
LOAD CASE = 102
NODE NO = 2565
Virtecal Load (Fy) = 1.90 KN
Horizontal load (Fz) = 7.35 KN
Laterial load (Fx) = 0.09 KN
Moment (Mx) = 0.00 m-KN
Moment (Mz) = 0.15 m-KN

Column Size = 0.35 x 0.60 mxm

Foundation size = 1.50 x 1.50 mxm
Depth of foundation = 0.30 m
Height of column below FGL = 1.20 m

Total moment M1 = 11.02 m-KN

Total moment M2 = 0.28 m-KN

Weight of column = 7.88 KN

Weight of Foundation = 16.88 KN
Weight of soil over foundation = 45.29 KN
Total weight = 71.94 KN

Gross Bearing Pressure = 52.05 or 11.89

Net bearing pressure = 49.65 KN/m2

S.B.C. = = 225 KN/m2
> Net Bearing Pressure of 49.65 ton/m^2 , O.K.
Design of footing
Maximum moment at face of pedestal, M Ed = 7.54 m-KN
fck = 30.00 N/mm2
fctk = 1.90 N/mm2
fyk = 420.00 N/mm2
Effective depth, d = = 220.00 mm
Required reinforcement, Ast = 98.74 mm2

ყmc = 1.5
ყms = 1.15

fcd = 20.00 N/mm2

fctd = 1.30 N/mm2
fyd = 365.20 N/mm2

Asmin. (0.002 of cross-section area ) = 440 mm2 (As per cl 10.3.3 of TS-500)

Hence, provide 12 dia bar @ 250 mm c/c in footing on each face.

= 565 mm2 Hence OK

Stability check
Check against sliding

Resultant sliding force = 7.35 KN

Total dead load = 71.94 KN
Assuming friction coefficient m = 0.45
Total resistance force, Fstab = 32.37 KN
Allowable factor of safety = 1.2
Factor of safety against sliding, FS = 4.41 Hence Safe

Check against overturning

Overturning moment = 11.02 m-KN
Total stabilising moment, Ms = = 54.0 m-KN

Allowable factor of safety = 1.5

Factor of safety against overturning, FS = 4.9 Hence Safe

Checking for Punching Shear shear :-

Punching shear strength Vpr = ყfctdupd (as per equ-8.21 of TS-500)
ყ = 1 (as per equ-8.22 of TS-500)
up = 2.34
Punching shear strength Vpr = 669240.00 N
= 669.24 KN

factored shear force, Vd = 14.66 KN Hence Safe

Checking for One way Shear shear :-

Vcr (as per equ-8.1 of TS-500)

ყ = 0.07

Nd = 0

Vcr = 185900 N
= 185.9 KN

Vd = 17.63
= 17.63

Factored design shear = 0 Hence Safe

Design of Coulmn/Pedestal

Size of column = 350 x 600

Pu = 1.90 KN

Mx = 0.28 m-KN

Mz = 11.02 m-KN

Provided 14 ᶲ 12 NOS REINFORCEMENT

FOR - X FOR Z
Effective depth of column (d) = 528.00 mm 278 mm

Pu/(FCKbd) = 0

Mx/(FCKbd2) = 0.000

Mx/(FCKbd2) = 0.005

from the above values from chart minmum r/f will be required .

Asmin. (0.002 of cross-section area ) = 420

Asprovided = 1847 Hence OK
 PROJECT-9680
FOUNDATION DESIGN FOR F4 CASE-1
REACTION FROM STAAD
LOAD CASE = 101
NODE NO = 6
Virtecal Load (Fy) = 33.66 KN
Horizontal load (Fz) = 0.19 KN
Laterial load (Fx) = 8.45 KN
Moment (Mx) = 0.28 m-KN
Moment (Mz) = 0.00 m-KN

Column Size = 0.35 x 0.60 mxm

Foundation size = 1.25 x 1.25 mxm
Depth of foundation = 0.30 m
Height of column below FGL = 1.20 m

Total moment M1 = 0.57 m-KN

Total moment M2 = 12.68 m-KN

Weight of column = 7.88 KN

Weight of Foundation = 11.72 KN
Weight of soil over foundation = 30.03 KN
Total weight = 83.28 KN

Gross Bearing Pressure = 93.99 or 12.61

Net bearing pressure = 91.59 KN/m2

S.B.C. = = 225 KN/m2
> Net Bearing Pressure of 91.59 ton/m^2 , O.K.
Design of footing
Maximum moment at face of pedestal, M Ed = 7.26 m-KN
fck = 30.00 N/mm2
fctk = 1.90 N/mm2
fyk = 420.00 N/mm2
Effective depth, d = = 220.00 mm
Required reinforcement, Ast = 95.01 mm2

ყmc = 1.5
ყms = 1.15

fcd = 20.00 N/mm2

fctd = 1.30 N/mm2
fyd = 365.20 N/mm2

Asmin. (0.002 of cross-section area ) = 440 mm2 (As per cl 10.3.3 of TS-500)

Hence, provide 12 dia bar @ 250 mm c/c in footing on each face.

= 565 mm2 Hence OK

Stability check
Check against sliding

Resultant sliding force = 8.45 KN

Total dead load = 83.28 KN
Assuming friction coefficient m = 0.45
Total resistance force, Fstab = 37.48 KN
Allowable factor of safety = 1.2
Factor of safety against sliding, FS = 4.43 Hence Safe

Check against overturning

Overturning moment = 12.68 m-KN
Total stabilising moment, Ms = = 52.1 m-KN

Allowable factor of safety = 1.5

Factor of safety against overturning, FS = 4.1 Hence Safe

Checking for Punching Shear shear :-

Punching shear strength Vpr = ყfctdupd (as per equ-8.21 of TS-500)
ყ = 1 (as per equ-8.22 of TS-500)
up = 2.34
Punching shear strength Vpr = 669240.00 N
= 669.24 KN

factored shear force, Vd = 62.31 KN Hence Safe

Checking for One way Shear shear :-

Vcr (as per equ-8.1 of TS-500)

ყ = 0.07

Nd = 0

Vcr = 185900 N
= 185.9 KN

Vd = 21.07
= 21.07

Factored design shear = 0 Hence Safe

Design of Coulmn/Pedestal

Size of column = 350 x 600

Pu = 33.66 KN

Mx = 12.68 m-KN

Mz = 0.57 m-KN

Provided 14 ᶲ 12 NOS REINFORCEMENT

FOR - X FOR Z
Effective depth of column (d) = 528.00 mm 278 mm

Pu/(FCKbd) = 0.001

Mx/(FCKbd2) = 0.003

Mx/(FCKbd2) = 0

from the above values from chart minmum r/f will be required .

Asmin. (0.002 of cross-section area ) = 420

Asprovided = 1847 Hence OK
 PROJECT-9680
FOUNDATION DESIGN FOR F4 CASE-2
REACTION FROM STAAD
LOAD CASE = 102
NODE NO = 9
Virtecal Load (Fy) = 2.92 KN
Horizontal load (Fz) = 0.01 KN
Laterial load (Fx) = 0.67 KN
Moment (Mx) = 0.00 m-KN
Moment (Mz) = 2.06 m-KN

Column Size = 0.35 x 0.60 mxm

Foundation size = 1.25 x 1.25 mxm
Depth of foundation = 0.30 m
Height of column below FGL = 1.20 m

Total moment M1 = 0.02 m-KN

Total moment M2 = 3.06 m-KN

Weight of column = 7.88 KN

Weight of Foundation = 11.72 KN
Weight of soil over foundation = 30.03 KN
Total weight = 52.54 KN

Gross Bearing Pressure = 43.08 or 24.16

Net bearing pressure = 40.68 KN/m2

S.B.C. = = 225 KN/m2
> Net Bearing Pressure of 40.68 ton/m^2 , O.K.
Design of footing
Maximum moment at face of pedestal, M Ed = 3.22 m-KN
fck = 30.00 N/mm2
fctk = 1.90 N/mm2
fyk = 420.00 N/mm2
Effective depth, d = = 220.00 mm
Required reinforcement, Ast = 42.20 mm2

ყmc = 1.5
ყms = 1.15

fcd = 20.00 N/mm2

fctd = 1.30 N/mm2
fyd = 365.20 N/mm2

Asmin. (0.002 of cross-section area ) = 440 mm2 (As per cl 10.3.3 of TS-500)

Hence, provide 12 dia bar @ 150 mm c/c in footing on each face.

= 905 mm2 Hence OK

Stability check
Check against sliding

Resultant sliding force = 0.67 KN

Total dead load = 52.54 KN
Assuming friction coefficient m = 0.45
Total resistance force, Fstab = 23.64 KN
Allowable factor of safety = 1.2
Factor of safety against sliding, FS = 35.39 Hence Safe

Check against overturning

Overturning moment = 3.06 m-KN
Total stabilising moment, Ms = = 32.8 m-KN

Allowable factor of safety = 1.5

Factor of safety against overturning, FS = 10.7 Hence Safe

Checking for Punching Shear shear :-

Punching shear strength Vpr = ყfctdupd (as per equ-8.21 of TS-500)
ყ = 1 (as per equ-8.22 of TS-500)
up = 2.34
Punching shear strength Vpr = 669240.00 N
= 669.24 KN

factored shear force, Vd = 16.19 KN Hence Safe

Checking for One way Shear shear :-

Vcr (as per equ-8.1 of TS-500)

ყ = 0.07

Nd = 0

Vcr = 185900 N
= 185.9 KN

Vd = 9.36
= 9.36

Factored design shear = 0 Hence Safe

Design of Coulmn/Pedestal

Size of column = 350 x 600

Pu = 2.92 KN

Mx = 3.06 m-KN

Mz = 0.02 m-KN

Provided 14 ᶲ 12 NOS REINFORCEMENT

FOR - X FOR Z
Effective depth of column (d) = 528.00 mm 278 mm

Pu/(FCKbd) = 0

Mx/(FCKbd2) = 0.001

Mx/(FCKbd2) = 0

from the above values from chart minmum r/f will be required .

Asmin. (0.002 of cross-section area ) = 420

Asprovided = 1847 Hence OK
 PROJECT-9680
FOUNDATION DESIGN FOR F3
REACTION FROM STAAD
LOAD CASE = 106
NODE NO = 46
Virtecal Load (Fy) = 256.91 KN
Horizontal load (Fz) = 0.04 KN
Laterial load (Fx) = 26.31 KN
Moment (Mx) = 0.00 m-KN
Moment (Mz) = 77.46 m-KN

Column Size = 0.60 x 0.60 mxm

Foundation size = 3.70 x 1.50 mxm
Depth of foundation = 0.30 m
Height of column below FGL = 1.20 m

Total moment M1 = 0.06 m-KN

Total moment M2 = 116.93 m-KN

Weight of column = 13.50 KN

Weight of Foundation = 41.63 KN
Weight of soil over foundation = 115.22 KN
Total weight = 427.25 KN

Gross Bearing Pressure = 111.19 or 42.78

Net bearing pressure = 108.79 KN/m2

S.B.C. = = 225 KN/m2
> Net Bearing Pressure of 108.79 ton/m^2 , O.K.
Design of footing
Maximum moment at face of pedestal, M Ed = 16.52 m-KN
fck = 30.00 N/mm2
fctk = 1.90 N/mm2
fyk = 420.00 N/mm2
Effective depth, d = = 220.00 mm
Required reinforcement, Ast = 216.35 mm2

ყmc = 1.5
ყms = 1.15

fcd = 20.00 N/mm2

fctd = 1.30 N/mm2
fyd = 365.20 N/mm2

Asmin. (0.002 of cross-section area ) = 440 mm2 (As per cl 10.3.3 of TS-500)

Hence, provide 12 dia bar @ 250 mm c/c in footing on each face.

= 565 mm2 Hence OK

Stability check
Check against sliding

Resultant sliding force = 26.31 KN

Total dead load = 427.25 KN
Assuming friction coefficient m = 0.45
Total resistance force, Fstab = 192.26 KN
Allowable factor of safety = 1.2
Factor of safety against sliding, FS = 7.31 Hence Safe

Check against overturning

Overturning moment = 116.93 m-KN
Total stabilising moment, Ms = = 790.4 m-KN

Allowable factor of safety = 1.5

Factor of safety against overturning, FS = 6.8 Hence Safe

Checking for Punching Shear shear :-

Punching shear strength Vpr = ყfctdupd (as per equ-8.21 of TS-500)
ყ = 1 (as per equ-8.22 of TS-500)
up = 2.84
Punching shear strength Vpr = 812240.00 N
= 812.24 KN

factored shear force, Vd = 405.61 KN Hence Safe

Checking for One way Shear shear :-

Vcr (as per equ-8.1 of TS-500)

ყ = 0.07

Nd = 0

Vcr = 185900 N
= 185.9 KN

Vd = 144.69
= 144.69

Factored design shear = 0 Hence Safe

Design of Coulmn/Pedestal

Size of column = 600 x 600

Pu = 256.91 KN

Mx = 116.93 m-KN

Mz = 0.06 m-KN

Provided 12 ᶲ 12 NOS REINFORCEMENT

FOR - X FOR Z
Effective depth of column (d) = 530.00 mm 530 mm

Pu/(FCKbd) = 0.003

Mx/(FCKbd2) = 0.018

Mx/(FCKbd2) = 0

from the above values from chart minmum r/f will be required .

Asmin. (0.002 of cross-section area ) = 720

Asprovided = 1357 Hence OK
 PROJECT-9680
FOUNDATION DESIGN FOR F3
REACTION FROM STAAD
LOAD CASE = 101
NODE NO = 45
Virtecal Load (Fy) = 23.28 KN
Horizontal load (Fz) = 0.08 KN
Laterial load (Fx) = 24.37 KN
Moment (Mx) = 0.00 m-KN
Moment (Mz) = 74.65 m-KN

Column Size = 0.60 x 0.60 mxm

Foundation size = 3.70 x 1.50 mxm
Depth of foundation = 0.30 m
Height of column below FGL = 1.20 m

Total moment M1 = 0.12 m-KN

Total moment M2 = 111.21 m-KN

Weight of column = 13.50 KN

Weight of Foundation = 41.63 KN
Weight of soil over foundation = 115.22 KN
Total weight = 193.63 KN

Gross Bearing Pressure = 67.47 or 2.31

Net bearing pressure = 65.07 KN/m2

S.B.C. = = 225 KN/m2
> Net Bearing Pressure of 65.07 ton/m^2 , O.K.
Design of footing
Maximum moment at face of pedestal, M Ed = 9.88 m-KN
fck = 30.00 N/mm2
fctk = 1.90 N/mm2
fyk = 420.00 N/mm2
Effective depth, d = = 220.00 mm
Required reinforcement, Ast = 129.40 mm2

ყmc = 1.5
ყms = 1.15

fcd = 20.00 N/mm2

fctd = 1.30 N/mm2
fyd = 365.20 N/mm2

Asmin. (0.002 of cross-section area ) = 440 mm2 (As per cl 10.3.3 of TS-500)

Hence, provide 12 dia bar @ 250 mm c/c in footing on each face.

= 565 mm2 Hence OK

Stability check
Check against sliding

Resultant sliding force = 24.37 KN

Total dead load = 193.63 KN
Assuming friction coefficient m = 0.45
Total resistance force, Fstab = 87.13 KN
Allowable factor of safety = 1.2
Factor of safety against sliding, FS = 3.58 Hence Safe

Check against overturning

Overturning moment = 111.21 m-KN
Total stabilising moment, Ms = = 358.2 m-KN

Allowable factor of safety = 1.5

Factor of safety against overturning, FS = 3.2 Hence Safe

Checking for Punching Shear shear :-

Punching shear strength Vpr = ყfctdupd (as per equ-8.21 of TS-500)
ყ = 1 (as per equ-8.22 of TS-500)
up = 2.84
Punching shear strength Vpr = 812240.00 N
= 812.24 KN

factored shear force, Vd = 55.17 KN Hence Safe

Checking for One way Shear shear :-

Vcr (as per equ-8.1 of TS-500)

ყ = 0.07

Nd = 0

Vcr = 185900 N
= 185.9 KN

Vd = 86.54
= 86.54

Factored design shear = 0 Hence Safe

Design of Coulmn/Pedestal

Size of column = 600 x 600

Pu = 23.28 KN

Mx = 111.21 m-KN

Mz = 0.12 m-KN

Provided 12 ᶲ 12 NOS REINFORCEMENT

FOR - X FOR Z
Effective depth of column (d) = 530.00 mm 530 mm

Pu/(FCKbd) = 0

Mx/(FCKbd2) = 0.017

Mx/(FCKbd2) = 0

from the above values from chart minmum r/f will be required .

Asmin. (0.002 of cross-section area ) = 720

Asprovided = 1357 Hence OK
 Horizontal Vertical Horizontal Moment
Node L/C Fx kN Fy kN Fz kN Mx kN-m
Max Fx 67 102 DL-EQX 8.462 59.991 -0.107 -0.112
Min Fx 67 101 DL+EQX -10.001 60.053 0.129 0.442
Max Fy 68 104 DL-EQZ 1.059 72.156 10.918 28.683
Min Fy 2711 104 DL-EQZ -0.702 18.102 4.843 11.868
Max Fz 68 104 DL-EQZ 1.059 72.156 10.918 28.683
Min Fz 68 103 DL+EQZ 0.886 64.19 -10.876 -27.803
Max Mx 72 104 DL-EQZ 0.462 48.927 8.447 51.701
Min Mx 72 103 DL+EQZ 0.294 48.964 -9.551 -48.061
Max My 67 101 DL+EQX -10.001 60.053 0.129 0.442
Min My 67 102 DL-EQX 8.462 59.991 -0.107 -0.112
Max Mz 67 101 DL+EQX -10.001 60.053 0.129 0.442
Min Mz 67 102 DL-EQX 8.462 59.991 -0.107 -0.112
My kN-m Mz kN-m
-0.008 -45.933
0.012 56.493
-0.001 0.135
0 3.886
-0.001 0.135
0.004 0.887
-0.003 1.059
0.004 1.802
0.012 56.493
-0.008 -45.933
0.012 56.493
-0.008 -45.933
 Horizontal Vertical Horizontal Moment
Node L/C Fx kN Fy kN Fz kN Mx kN-m My kN-m Mz kN-m
Max Fx 53 102 DL-EQX 13.707 101.768 2.567 6.685 -0.007 0
Min Fx 2565 106 DL+LL+EQ -16.4 103.061 0.889 1.265 -0.004 0
Max Fy 56 104 DL-EQZ -0.107 106.689 2.474 3.724 0 0
Min Fy 93 104 DL-EQZ 0.087 -1.897 7.346 0 0.033 -0.146
Max Fz 25 104 DL-EQZ 1.087 96.225 30.353 0 0 -1.65
Min Fz 27 103 DL+EQZ 1.087 96.172 -30.31 0 0 -1.65
Max Mx 2565 104 DL-EQZ -1.872 91.783 9.978 25.32 0.048 0
Min Mx 2571 108 DL+LL+EQ -2.709 93.453 -9.976 -25.313 -0.047 0
Max My 38 102 DL-EQX 7.126 41.633 7.732 0 3.321 -23.612
Min My 38 106 DL+LL+EQ -7.065 64.709 7.63 0 -3.321 23.525
Max Mz 42 106 DL+LL+EQ -9.658 88.816 -0.004 0 0 24.563
Min Mz 41 102 DL-EQX 9.656 89.224 -0.001 0 0 -24.562
 Horizontal Vertical Horizontal Moment
Node L/C Fx kN Fy kN Fz kN Mx kN-m My kN-m Mz kN-m
Max Fx 8 102 DL-EQX 0.754 18.974 -0.008 0 0 -2.193
Min Fx 6 101 DL+EQX -8.453 33.664 0.191 0.279 -0.001 0
Max Fy 6 101 DL+EQX -8.453 33.664 0.191 0.279 -0.001 0
Min Fy 9 102 DL-EQX 0.668 2.917 -0.012 0 0 -2.06
Max Fz 6 104 DL-EQZ -3.908 31.105 2.99 7.588 0.048 0
Min Fz 6 103 DL+EQZ -3.981 22.712 -2.602 -7.007 -0.048 0
Max Mx 6 104 DL-EQZ -3.908 31.105 2.99 7.588 0.048 0
Min Mx 6 103 DL+EQZ -3.981 22.712 -2.602 -7.007 -0.048 0
Max My 6 104 DL-EQZ -3.908 31.105 2.99 7.588 0.048 0
Min My 6 103 DL+EQZ -3.981 22.712 -2.602 -7.007 -0.048 0
Max Mz 8 101 DL+EQX -0.779 17.575 0.003 0 0 2.659
Min Mz 8 102 DL-EQX 0.754 18.974 -0.008 0 0 -2.193
 Horizontal Vertical Horizontal Moment
Node L/C Fx kN Fy kN Fz kN Mx kN-m My kN-m Mz kN-m
Max Fx 45 107 DL+LL-EQX 26.307 239.005 -0.067 0 0 -77.28
Min Fx 46 106 DL+LL+EQX -26.314 256.908 -0.04 0 0 77.455
Max Fy 46 106 DL+LL+EQX -26.314 256.908 -0.04 0 0 77.455
Min Fy 45 101 DL+EQX -24.371 23.283 -0.081 0 0 74.65
Max Fz 44 113 DL-WLZ -0.997 90.401 0.339 0 0.004 1.436
Min Fz 43 116 DL+LL+WLZ 0.999 115.242 -0.465 0 0.003 -1.445
Max Mx 43 101 DL+EQX -16.876 35.884 -0.113 0 0 53.848
Min Mx 43 101 DL+EQX -16.876 35.884 -0.113 0 0 53.848
Max My 44 117 DL+LL-WLZ -0.998 114.776 0.215 0 0.004 1.437
Min My 44 112 DL+WLZ -0.999 90.405 -0.332 0 -0.004 1.441
Max Mz 46 106 DL+LL+EQX -26.314 256.908 -0.04 0 0 77.455
Min Mz 45 102 DL-EQX 26.305 196.106 0.015 0 0 -77.28