Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 154 views

    EAM Numerical

    Uploaded by

    61EEPrabhat Pal
    1. The document discusses calculating energy savings over 8 months using CUSUM technique and production data. 2. It presents cash flow tables for two projects A and B over 5 years and asks to determine the preferable project using a 20% discount rate. 3. It mentions numerical problems on net present value (NPV) and internal rate of return (IRR).

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    EAM Numerical

    Uploaded by

    61EEPrabhat Pal
    154 views6 pages
    1. The document discusses calculating energy savings over 8 months using CUSUM technique and production data. 2. It presents cash flow tables for two projects A and B over 5 years and asks to determine the preferable project using a 20% discount rate. 3. It mentions numerical problems on net present value (NPV) and internal rate of return (IRR).

    Original Description:

    Energy Audit and Management

    Original Title

    EAM_Numerical

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document discusses calculating energy savings over 8 months using CUSUM technique and production data. 2. It presents cash flow tables for two projects A and B over 5 years and asks to determine the preferable project using a 20% discount rate. 3. It mentions numerical problems on net present value (NPV) and internal rate of return (IRR).

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    154 views6 pages

    EAM Numerical

    Uploaded by

    61EEPrabhat Pal
    1. The document discusses calculating energy savings over 8 months using CUSUM technique and production data. 2. It presents cash flow tables for two projects A and B over 5 years and asks to determine the preferable project using a 20% discount rate. 3. It mentions numerical problems on net present value (NPV) and internal rate of return (IRR).

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    1.

    Use CUSUM technique to develop a table and to calculate energy savings for 8 months
    period. For calculating total energy saving, average production can be taken as 6,000 MT
    per month. Refer to field data given in the table below.
    2. Consider two projects A & B with initial investment of Rs. 80000. The project life is 5 years
    in each case. The savings in each of the five years for both the projects is shown in the
    table below.
    Project A Project B
    Capital Cost (Rs.) 80000 80000
    Year Cash Flows (Rs.) Cash Flows (Rs.)
    1 10000 50000
    2 20000 40000
    3 30000 30000
    4 40000 20000
    5 50000 10000
    Assume discount rate of 20%. Find out preferrable project out of the two.
    3. Numerical on NPV and IRR

    4. What will be the capacity of 415V, 50 kVAr rated power factor capacitor bank if it was
    connected to a supply voltage of 430 V.
    5. Calculate the annual energy savings from replacing an existing standard motor with
    premium efficiency motor versus repairing a standard efficiency. The data given are motor
    7.5HP; working hours 3000Hrs; ⴄstandard= 87.5%; ⴄpremium= 93.5%; Loading=70%.
    6. Industrial workshop has 200Nos. of 100W incandescent lamps. It has been decided to
    replace the lamps by 1x 18w CFL. Check the feasibility of this replacement on the economic
    criteria. No. operating hours for lighting was 6000 hrs/ yr. Assume cost of energy Rs.
    8/unit and CFL cost is Rs. 100/unit.

    7. What will be the energy cost savings of a 50HP motor if it operates at 91% efficiency
    compared to operating at 86% efficiency? Consider 3000Hrs of operation and tariff rate of
    Rs.5/kWh
    8. A 3-Phase, 50 kW rated Induction motor drawing 44 kW in a manufacturing industry has a
    power factor of 0.75 lagging. What size of capacitor in kVAr in each phase is required to
    improve the operating power factor to 0.96? Calculate the reduction in current, kVA and
    kW respectively, due to capacitor installation at operating voltage of 415 V?

    You might also like