Barite API MSDS

MATERIAL SAFETY DATA SHEET
Product Name : BARITE (API) MSDS Control No : P1501.93
Date : 18 OCT. 2003 Revision : 05
SECTION 1 – COMPANY DETAILS
Supplier : Petrochem Performance Chemicals Limited LLC

Address : P.O. Box 34657 – Abu Dhabi, U.A.E.
Telephone No. : 971 – 2 – 555 9104
Fax No. : 971 – 2 – 554 2524
SECTION 2 – COMPOSITION / INFORMATION ON INGREDIENTS
Chemical characterization : Barium Sulphate

CAS Registry Number : 7727 – 43 – 7
SECTION 3 – HAZARDS IDENTIFICATION
To be read in conjunction with SECTIONS 8 & 11

MOST IMPORTANT HAZARDS : CAUTION : MAY CAUSE EYE, SKIN AND RESPIRATORY TRACT
IRRITATION.
Avoid contact with eyes, skin and clothing. Avoid breathing airborne product.
Keep container closed. Use with adequate ventilation. Wash thoroughly after
handling.
This product is a transparent tan to powder.
Slippery when wet. A nuisance dust.
Adverse human health effect : No specific risk when handled in accordance with good occupational hygiene
and safety practice.
TLV – TWA : 10 mg/m3 – nuisance dust.
Environmental effects : Negligible effects.
Physical and chemical hazards : Non – flammable solid.
– Fire or explosion : Finely divided particles may form explosive mixtures in air.
– Further hazards : No specific hazard under normal conditions of use.
SECTION 4 – FIRST AID MEASURES
Eye contact : Rinse with water whilst keeping the eyes wide open.
Skin contact : Rinse with plenty of water.
Ingestion : Call a doctor who will decide whether a stomach washout is necessary.
Inhalation : Move the affected person away from the contaminated area and into the fresh
air. Make affected person rest. If necessary seek medical advice.
SECTION 5 – FIRE–FIGHTING MEASURES
Extinguishing media
– Suitable : Water spray, Foam
Multipurpose powders (dry powder)
Carbon dioxide (CO2)
– Not suitable : Strong water jet
Specific hazards : Risk of a dust explosion
BARITE (API) 1/3 P1501.9305

SECTION 6 – ACCIDENTAL RELEASE MEASURES
Personal precautions : Wear appropriate gloves, dust respirator if long exposure to spill is necessary.
Environmental precautions : Avoid large amounts to discharge into drains.
Methods for cleaning up : Recover the product by vacuuming / shoveling or sweeping.
Use of water wash down is recommended.
Wash to drain. Slippery when wet.
SECTION 7 – HANDLING AND STORAGE
Handling : Dust extraction (suction), flameproof of lighting, electrical equipment and

ventilation. Prevent the build – up of electrostatic charge.
Do NOT use compressed air to transfer, discharge or transport the product.
Storage : Store in a dry place, stable under normal storage conditions.
– Incompatible products : Strong oxidizing agents.
– Packaging : Product should be stored in the original packaging.
– Packaging materials : Water – resistant materials are recommended.
SECTION 8 – EXPOSURE CONTROLS / PERSONAL PROTECTION
Personal protective equipment

Respiratory protection : If handling generates dust levels which cause irritation, or results in personal
exposure exceeding the Occupational Exposure Standard (OES) of 10 mg M-3
(8 hr TWA reference period) for total inhalable dust, then suitable approved dust
respirator should be used.
Hand protection : Impermeable gloves are recommended if extended exposure anticipated.

Eye protection : The use of suitable eye protection (goggles) is recommended.
Skin protection : Normal working clothes.
Other protecting equipment : Local exhaust ventilation is recommended if handling generates dust
concentrations that exceed the OES.
Respirators : Use at l east a NIOSH – approved N95 half – mask disposable or re–useable
respirator. In work environments containing oil mists / aerosol use at least a
NIOSH – approvedP95 half – mask disposable or re–useable particulate
respirator. For exposures exceeding 10 X PEL use a NIOSH – approved N100
Particulate Respirator.
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
below properties are typical, and should not be taken as Certificate of Analysis
Physical state : Solid
Appearance : Gray to tan colored powder
Odor : Odorless
pH : NA
Solubility
– in water : Insoluble
– in organic solvents :
Bulk Density : 2160 kg/m3
Flammability characteristics
– Flash Point : Not applicable (non – flammable solid)
– Auto ignition temperature : Above 300 OC
BARITE (API) 2/3 P1501.9305

SECTION 10 – STABILITY AND REACTIVITY
Stability : Stable under normal conditions of use. Thermal decomposition above 250 OC.
Material to avoid : Strong oxidizers.
Hazardous decomposition
products : No dangerous reaction, decomposition products known with common products.
Hazardous Polymerization : Will not occur.
SECTION 11 – TOXICOLOGICAL INFORMATION
Acute toxicity : No toxicological data is available to this product.

Local effects : Excessive inhalation may cause minor respiratory irritation.
SECTION 12 – ECOLOGICAL INFORMATION
Degradability : Unknown.
Effects on Aquatic environment : Detrimental effect only at very high concentrations.
SECTION 13 – DISPOSAL CONSIDERATIONS
In accordance with local and national regulations.
SECTION 14 – TRANSPORT INFORMATION
UN Number :
Packaging category : Class :
SECTION 15 – REGULATIONS INFORMATION
R – phrase (s) : R36 / 38 Irritating to eyes / skin.
S – phrase (s) : S36 / 37 / 39 Wear suitable protective clothing, gloves and

eye / face protection
Labeling required in accordance with EEC directives.

There are no additional regulations which define this product as dangerous and special provisions relating to
labeling, packaging, handling of dangerous substances or preparations do no apply.
SECTION 16 – OTHER INFORMATION
The data given here is based on current knowledge and experience. The purpose of this Safety Data Sheet is to
describe the products in terms of their safety requirements. The data does not signify any warranty with regard to the
products’ properties. This does not exonerate the user from ensuring that legal obligations, other than those
mentioned, relating to the use and storage of the product, do not exist. This is solely the users’ responsibility.
BARITE (API) 3/3 P1501.9305

Barite API MSDS

Uploaded by

Copyright:

Available Formats

Barite API MSDS

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Barite API MSDS

Uploaded by

Copyright:

Available Formats

MATERIAL SAFETY DATA SHEET

Product Name : BARITE (API) MSDS Control No : P1501.93

Date : 18 OCT. 2003 Revision : 05

SECTION 1 – COMPANY DETAILS

Supplier : Petrochem Performance Chemicals Limited LLC

SECTION 2 – COMPOSITION / INFORMATION ON INGREDIENTS

Chemical characterization : Barium Sulphate

SECTION 3 – HAZARDS IDENTIFICATION

To be read in conjunction with SECTIONS 8 & 11

– Further hazards : No specific hazard under normal conditions of use.

SECTION 4 – FIRST AID MEASURES

SECTION 5 – FIRE–FIGHTING MEASURES

BARITE (API) 1/3 P1501.9305

SECTION 6 – ACCIDENTAL RELEASE MEASURES

SECTION 7 – HANDLING AND STORAGE

Handling : Dust extraction (suction), flameproof of lighting, electrical equipment and

SECTION 8 – EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protective equipment

Hand protection : Impermeable gloves are recommended if extended exposure anticipated.

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES

BARITE (API) 2/3 P1501.9305

SECTION 10 – STABILITY AND REACTIVITY

SECTION 11 – TOXICOLOGICAL INFORMATION

Acute toxicity : No toxicological data is available to this product.

SECTION 12 – ECOLOGICAL INFORMATION

SECTION 13 – DISPOSAL CONSIDERATIONS

In accordance with local and national regulations.

SECTION 14 – TRANSPORT INFORMATION

SECTION 15 – REGULATIONS INFORMATION

R – phrase (s) : R36 / 38 Irritating to eyes / skin.

S – phrase (s) : S36 / 37 / 39 Wear suitable protective clothing, gloves and

Labeling required in accordance with EEC directives.

SECTION 16 – OTHER INFORMATION

BARITE (API) 3/3 P1501.9305

You might also like