Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    Konfigurasi 2 Router RIP

    Uploaded by

    Krisdey Simanullang
    The document describes the configuration of two routers for RIP routing. Router 1 is configured with Ethernet interface 192.168.10.1 and serial interface 10.10.10.1. Router 2 is configured with Ethernet interface 192.168.20.1 and serial interface 10.10.10.2. The RIP routing process is enabled on each router and the respective networks are included.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Konfigurasi 2 Router RIP

    Uploaded by

    Krisdey Simanullang
    12 views2 pages
    The document describes the configuration of two routers for RIP routing. Router 1 is configured with Ethernet interface 192.168.10.1 and serial interface 10.10.10.1. Router 2 is configured with Ethernet interface 192.168.20.1 and serial interface 10.10.10.2. The RIP routing process is enabled on each router and the respective networks are included.

    Original Title

    Konfigurasi 2 router RIP

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the configuration of two routers for RIP routing. Router 1 is configured with Ethernet interface 192.168.10.1 and serial interface 10.10.10.1. Router 2 is configured with Ethernet interface 192.168.20.1 and serial interface 10.10.10.2. The RIP routing process is enabled on each router and the respective networks are included.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    12 views2 pages

    Konfigurasi 2 Router RIP

    Uploaded by

    Krisdey Simanullang
    The document describes the configuration of two routers for RIP routing. Router 1 is configured with Ethernet interface 192.168.10.1 and serial interface 10.10.10.1. Router 2 is configured with Ethernet interface 192.168.20.1 and serial interface 10.10.10.2. The RIP routing process is enabled on each router and the respective networks are included.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Konfigurasi 2 router RIP:

    Untuk router1

    Router>enable
    Router#
    Router#configure terminal
    Enter configuration commands, one per line. End with CNTL/Z.
    Router(config)#interface FastEthernet0/0
    Router(config-if)#ip address 192.168.10.1 255.255.255.0
    Router(config-if)#ip address 192.168.10.1 255.255.255.0
    Router(config-if)#no shutdown

    Router(config-if)#exit
    Router(config)#interface Serial0/0/0
    Router(config-if)#ip address 10.10.10.1 255.0.0.0
    Router(config-if)#ip address 10.10.10.1 255.0.0.0
    Router(config-if)#no shutdown

    outer(config)#router rip
    Router(config-router)#network 192.168.20.0
    Router(config-router)#network 10.10.10.1
    Router(config-router)#network 192.168.10.0
    Router(config-router)#network 10.10.10.2

    Untuk Router 2:

    Router>enable
    Router#
    Router#configure terminal
    Enter configuration commands, one per line. End with CNTL/Z.
    Router(config)#interface FastEthernet0/0
    Router(config-if)#ip address 192.168.20.1 255.255.255.0
    Router(config-if)#ip address 192.168.20.1 255.255.255.0
    Router(config-if)#no shutdown

    Router(config-if)#exit
    Router(config)#interface Serial0/0/0
    Router(config-if)#
    Router(config-if)#exit
    Router(config)#interface Serial0/0/1
    Router(config-if)#ip address 10.10.10.2 255.0.0.0
    Router(config-if)#ip address 10.10.10.2 255.0.0.0
    Router(config-if)#no shutdown
    Router(config-if)#exit
    Router(config)#router rip
    Router(config-router)#network 192.168.10.0
    Router(config-router)#network 10.0.0.0
    Router(config-router)#network 192.168.20.0
    Router(config-router)#network 10.10.10.2

    Router>enable
    Router#
    Router#configure terminal
    Enter configuration commands, one per line. End with CNTL/Z.
    Router(config)#interface GigabitEthernet0/0
    Router(config-if)#
    Router(config-if)#exit
    Router(config)#interface GigabitEthernet0/0
    Router(config-if)#no shutdown
    Router(config-if)#
    %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up
    ip address 10.10.10.2 255.0.0.0
    Router(config-if)#ip address 10.10.10.2 255.255.0.0
    Router(config-if)#
    Router(config-if)#exit
    Router(config)#interface GigabitEthernet0/2
    Router(config-if)#no shutdown
    Router(config-if)#
    %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state


    to up
    ip address 192.168.20.1 255.255.255.0
    Router(config-if)#ip address 192.168.20.1 255.255.0.0
    Router(config-if)#ip dhcp pool dhcp1
    Router(dhcp-config)#default-router 192.168.20.1
    Router(dhcp-config)#network 192.168.20.0 255.255.0.0
    Router(dhcp-config)#ip excluded-address 192.168.20.1

    You might also like