Configuracion Router Cisco
Configuracion Router Cisco
Configuracion Router Cisco
Router# conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)# hostname R3
R3(config)#
R3# sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is not set
R 172.17.0.0/16 [120/2] via 192.168.1.9, 00:00:06, Serial0
R 172.16.0.0/16 [120/1] via 192.168.1.9, 00:00:06, Serial0
C 172.18.0.0/16 is directly connected, FastEthernet0
192.168.1.0/30 is subnetted, 2 subnets
C 192.168.1.8 is directly connected, Serial0
R 192.168.1.4 [120/1] via 192.168.1.9, 00:00:06, Serial0
R3#
Recuerde que puede mostrar los nombres de la interfaces, la configuración actual instalada, los
protocolos de enrutamiento , etc, utilizando el comando “show”.