Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

0service Bulletin List For

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Wartsila NSD Switzerland Ltd

Valid Service Bulletins

SULZER RTA
(except RTA38/48)

No. Date Title Reg.No.


Alphabetical Index of Topics of Service Bulletins
5-1 01.10.71 Treatment of Cooling Water for Diesel Engines 1
2S-1 15.08.74 Recommendations for Propeller Design, 2
Interrelationship between Engine/Propeller
G-3.1 06.10.93 Diesel Engine Fuels 3
G-5.1 31.08.98 Heading of Service Bulletins their Designation, 4
Purpose and Distribution
RTA-1 01.03.88 Recommendations Concerning Piston Running 5
Behaviour
RTA-2 05.10.88 Water Drain from Charge Air Receiver and Charge Air 6
Temperature
RTA-3.4 30.03.98 Fuel Injection Nozzles 7
RTA-4 20.11.89 Oil Damping for Short Tie Rods 8
RTA-8 15.06.92 RTA-Cylinder Liners and Reinforced Water Guide 9
Jackets
RTA-9 20.07.92 Cylinder Cover with Erosion/Corrosion Resistant 10
Cladding
RTA-10 28.10.92 11
RTA" - 8 Series"Engines / Piston Skirt in Two Parts
RTA-11.1 08.05.00 Fuel Injection Pump Regulating Linkage 12
RTA-11.2 11.05.01 Fuel Injection Pump Regulating Linkage 13
RTA-14 30.11.93 System Oil Care and Maintenance 14
RTA-15 10.02.94 Elastic Studs on RTA-Type Engines 15
RTA-16.1 20.02.98 Retrofit for Piston Rod Stuffing Boxes for RTA "- 16
8Series" Engines
RTA-17.1 28.02.95 Circulation Valve to Fuel Injection Valve 17
RTA-18.1 27.08.98 Running - in of Cylinder Liners and Piston Rings 18
RTA-19 28.10.94 Oil Supply Monitoring for Geislinger Torsional 19
Vibration Damper
RTA-20 30.11.94 Rotational Safety Studs for Roller Guide of Fuel 20
Pumps and Exhaust Valve Actuator
RTA-21 10.04.95 Improvement of Starting Behaviour 21
RTA-22.1 28.11.96 22
Waisted Bolts for Piston Crown Spraying Plate of
RTA 84C, 84M, 84T and 84CU (up-graded) Engines
RTA-24.2 18.05.99 VTR..4 Turbochargers After Sales Service Information 23
issued by ABB
RTA-26 03.01.96 Loss of Material on Piston Crowns due to High 24
Temperature Corrosion and Erosion
RTA-27 26.04.96 Plastic Water Separator 25
RTA-28 31.05.96 Improvement of the Engine Control System 26
RTA-29 21.10.96 Improved Oil Supply to the Intergrated Axial Detuner 27
equipped with Internal Oil Supply Line
RTA-30 27.11.96 Improvement of Starting Behaviour on RTA engines 28
equipped with PGA 200 and PGA EG 200 Type
Woodward Governor
G-6.5 05.01.01 Customer Training Courses 2001 29
`RTA-31 23.01.97 Alphabetical Index of Topics of Service Bulletins 30
RTA-33 11.04.97 Crank Pin Bearing Shell 31
G-7 29.08.97 Return of Components to wartsila NSD Switzerland 32
Ltd
RTA-34 28.11.97 33
Fuel Injection System Modifications and Maintenance
RTA-35 20.02.98 Retrofit for Piston Rod Stuffing Boxes for RTA "- 34
2Series" Engines
RTA-36 25.02.98 Reconditioning of Piston Rods of RTA"-2 Series" 35
Engines
RTA - 37 25.02.98 Reconditioning of Piston Rods of RTA"-8 Series" 36
Engines
RTA-37.1 11.06.01 Reconditioning of Piston Rods RTA"-8 Series" 37
Engines
RTA 38 26.02.98 38
Piston Crown Loss of Material on Combustion Side
RTA-39 31.03.98 Overhaul and Reconditioning of Pistons 39
RTA-42 25.09.98 Templates for Exhaust Valve Seat and Spindle 40
RTA-43 20.01.99 Piston Rings 41
G-8 25.01.99 Year 2000 Compliance 42
RTA-44 26.02.99 43
Tightening Instructions for the Plunger Guide Nipple
RTA-45 03.06.99 Tightening Instructions for Screws and Waisted 44
Studs
RTA-46 17.06.99 Cracks on Column 45
RTA-47 28.06.99 Draining of Fuel Oil Pipes Modification to Shut-off 46
valves of Fuel Pipes and Drain Plug of Fuel Pump
Block
RTA-48 20.09.99 47
Instruction for Replacement of Nox Relevant
Components on IMO Compliant Sulzer RTA Engines
G-9 06.10.99 Catalyst Fines in Heavy Fuel Oils 48
RTA-49 08.10.99 Gearing for Auxiliary Drives Z 42800 49
RTA-50 10.01.00 Leakage Oil Collector in Air Spring System of 50
Exhaust Valve
G-10.1 05.04.00 Maintenance Videos for RTA Engines 51
RTA-51 21.08.00 Deflagration in Engine Scavenge System and Exhaust 52
Manifold
RTA -52 22.09.00 Water Separator on RTA - Engines 53
RTA -53 12.06.01 Variable injection Timing and Fuel Quality Setting
54

You might also like