Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 109 views

    MAX5406 Audio Processor Preamplifier Projects - Electronics Projects Circuits

    Uploaded by

    K. RAJA SEKAR
    The document discusses a MAX5406 audio processor preamplifier circuit project. The circuit uses the MAX5406 audio processor chip to allow volume control, balance adjustment between channels, and frequency correction. The circuit is controlled using buttons and contains a 32-step potentiometer for volume management and 21-step adjustment of low and high frequencies. The MAX5406 chip comes in 48-pin packages and the circuit board uses the 48-pin TSSOP package. It can accept symmetric or asymmetric input signals and aggregates two stereo inputs to an asymmetric stereo output, with an additional subwoofer output.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MAX5406 Audio Processor Preamplifier Projects - Electronics Projects Circuits

    Uploaded by

    K. RAJA SEKAR
    109 views2 pages
    The document discusses a MAX5406 audio processor preamplifier circuit project. The circuit uses the MAX5406 audio processor chip to allow volume control, balance adjustment between channels, and frequency correction. The circuit is controlled using buttons and contains a 32-step potentiometer for volume management and 21-step adjustment of low and high frequencies. The MAX5406 chip comes in 48-pin packages and the circuit board uses the 48-pin TSSOP package. It can accept symmetric or asymmetric input signals and aggregates two stereo inputs to an asymmetric stereo output, with an additional subwoofer output.

    Original Title

    MAX5406 Audio Processor Preamplifier Projects – Electronics Projects Circuits

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses a MAX5406 audio processor preamplifier circuit project. The circuit uses the MAX5406 audio processor chip to allow volume control, balance adjustment between channels, and frequency correction. The circuit is controlled using buttons and contains a 32-step potentiometer for volume management and 21-step adjustment of low and high frequencies. The MAX5406 chip comes in 48-pin packages and the circuit board uses the 48-pin TSSOP package. It can accept symmetric or asymmetric input signals and aggregates two stereo inputs to an asymmetric stereo output, with an additional subwoofer output.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    109 views2 pages

    MAX5406 Audio Processor Preamplifier Projects - Electronics Projects Circuits

    Uploaded by

    K. RAJA SEKAR
    The document discusses a MAX5406 audio processor preamplifier circuit project. The circuit uses the MAX5406 audio processor chip to allow volume control, balance adjustment between channels, and frequency correction. The circuit is controlled using buttons and contains a 32-step potentiometer for volume management and 21-step adjustment of low and high frequencies. The MAX5406 chip comes in 48-pin packages and the circuit board uses the 48-pin TSSOP package. It can accept symmetric or asymmetric input signals and aggregates two stereo inputs to an asymmetric stereo output, with an additional subwoofer output.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    3/11/23, 11:08 PM MAX5406 Audio Processor Preamplifier Projects – Electronics Projects Circuits

    MAX5406 Audio Processor Preamplifier Projects


    gevv | August 4, 2019 Updated 2 Comments

    MAX5406 The proposed preamplifier is imposing several requirements. The


    preamp must allow volume control and balance (distribution of volume
    between channels), then it must allow the correction of the frequency
    characteristics. These requirements are satisfied by a number of integrated
    circuits intended for realization of the lna. These circuits, in all cases using to
    control the potentiometers. For the realization was chosen the circuit allows
    more elegant control with the buttons. This circuit is audioprocesor company
    Maxim MAX5406

    Digital Preamplifier Circuit MAX5406

    https://320volt.com/en/max5406-audio-processor-preamplifier-projects/ 1/2
    3/11/23, 11:08 PM MAX5406 Audio Processor Preamplifier Projects – Electronics Projects Circuits

    Circuit MAX5406 is audioprocesorem controlled using the buttons. Has 32 stepper potentiometer for volume
    management, allows the correction of low and high frequencies (lows and highs) in 21 steps, contains the function of
    the mute (muting the volume) and “ambience” (special effect editing sound outside-vented). The circuit is
    manufactured in two types of cases with 48 pins. This is the case 48 TSSOP and 48 TQFN-cases are designed for
    surface mounting. To implement it selected case 48 TSSOP. Audioprocesor allows connection of a symmetric or
    asymmetric signal. The circuit is equipped with inputs for connection of two stereo signals, which are to be aggregated.
    Output the signal is in the form of asymmetric stereo signal. There is also output for active subwoofer, whose signal is
    not úrovňově influenced by, is the only frequency limited

    max5406 circuit pcb schematic all files alternative links:

    FILE DOWNLOAD LINK LIST (in TXT format):  LINKS-25504.zip

    https://320volt.com/en/max5406-audio-processor-preamplifier-projects/ 2/2

    You might also like