111537EN-11

2019-10

UNI 2

User Manual
Air Handling Unit & Automatic Control
Contents
1 Functional description of balanced ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1 Fans (M1, M2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.2 Filters (FI1, FI2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3 Rotor (HR-R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.4 Heating element (EB1) (for UNI 2 E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.5 Temperature sensors (B1, B4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 Operating the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Wall-mounted unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 Floor-mounted unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3 Ceiling-mounted unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3 Overview of CI60 control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4 CI60 in use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2 Increasing/reducing air supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.3 Adjusting the air supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.4 Temperature adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.5 Filter replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.6 Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.7 Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5 Overview of CI600 control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6 CI600 in use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6.2 Idle mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6.3 Menu navigation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6.4 Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6.5 Operating status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7 CI600 main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7.1 Fan speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7.2 Max timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7.3 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7.4 Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7.5 Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
7.6 Daily/weekly timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
7.7 Time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7.8 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7.9 Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7.10 Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7.11 Operating information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8 CI600 advanced user menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8.1 PIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8.2 Advanced user . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8.3 Temperature regulation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8.4 Fan control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
8.5 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8.6 Operating time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
8.7 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
8.8 Menu tree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
9 Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
9.1 Changing the filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
9.2 Cleaning the fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
9.3 Changing the brush strips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
9.4 Tightening of rotor belt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
9.5 Cleaning the rotor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
9.6 External cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
10 Maintenance table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
11 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
12 CE Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

2
 Important Safety Instructions:
!
It is the installer's responsibility to carry out a full safety and function assessment of the appliance.

To reduce the risk of fire, electric shock or injury, read all the safety instructions and warning texts before using the unit.

• This unit is only designed for ventilation air in homes and commercial buildings.
• It must not be used to extract combustible or flammable gases.
• Remove the power plug before commencing any service and maintenance work.
• Before opening the door: switch off the heat, let the fans continue for 3 minutes to remove hot air, unplug the unit and wait 2
minutes before opening the doors.
• If the power lead is damaged, it must be replaced by the manufacturer, the manufacturer's service agent or a similarly
qualified person.
• The unit contains heating elements that must not be touched when they are hot.
• The unit must not be operated without the filters being in place.
• Do not cook any combustible substances under the kitchen hood if one is installed.
• Do not leave a saucepan or frying pan containing oil or grease unsupervised when using a kitchen hood.
• The instructions in the user manual must be followed for complaints to be accepted.

To maintain a good indoor climate, comply with regulations and avoid condensation damage, the unit must never be
stopped apart from during service/maintenance or in connection with an accident.

Symbols used
These products have a number of symbols that are used to label the product itself and in the installation and user documentation.

Supply air Extract air Kitchen air

DANGER! ELECTRICITY

DANGER! DO NOT
TOUCH

CAUTION! When a text bears this symbol, it

! means that personal injury or serious damage to
the equipment may result if the instructions are
not followed.
Exhaust air Outdoor air
NB! When a text bears this symbol, damage to
equipment or poor efficiency may be the conse-
quence of not following the instructions.

This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and under-
stand the hazards involved. Note that the product is not intended for
use by children.
Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
Our products are subject to continuous development and we therefore
EXAMPLE OF NIPPLE LOCATION reserve the right to make changes.
(shown as a right-hand model) We also disclaim liability for any printing errors that may occur.

Our products are subject to continuous development and we therefore reserve the right to make changes.
We also disclaim liability for any printing errors that may occur.

3
1 Functional description of balanced Fig. 1
ventilation
1.1 Fans (M1, M2)
The fans ensure that air enters and leaves the building.
They can be individually adjusted for optimal operation.
The unit can be regulated at three different speeds via the
control panel: Min, Normal and Max. See chapter 5.1 for more
M2
information. FI1 FI2
B1
Adjustment must always be carried out by
! qualified staff before the installation is used for K
the first time. EB1
F10
B4
F20
1.2 Filters (FI1, FI2)
Filters with a high filter grade (ePM1 55% F7) are used as
HR-R
standard for both supply air and extract air so that the air
which enters the building is clean. The filters also ensure that M4

the unit stays clean and can maintain thermal efficiency and
air flow. M1

1.3 Rotor (HR-R)

The air passes through the rotary wheel-type heat
exchanger (recovery). The rotor functions as a heat
magazine. The heat from the extract air heats up one part of
the rotor. When the heated part comes over to the supply
air side, the heat is transferred to the supply air.
Fig. 2
1.4 Heating element (EB1) (for UNI 2 E)
If the energy recovered from the extract air is insufficient to
maintain the set supply air temperature, an electric heating
element will help raise the temperature. The heating element
is protected against overheating by the thermostat (F20)
which cuts out at high temperature. For extra safety, the
thermostat (F10) cuts out at critical temperatures. If the
thermostat (F10) is tripped, it has to be reset manually by
pressing the reset button (see Fig. 2). If the alarm is tripped
repeatedly, contact the service company or distributor. See
chapters 4.7 and 7.10 for more information.

1.5 Temperature sensors (B1, B4)

The unit has two temperature sensors as standard. The
supply air sensor (B1) registers the temperature after the
heating battery. The outdoor air sensor (B4) registers the
temperature of the outdoor air.

4
2 Operating the door
2.1 Wall-mounted unit If the door needs to be removed
1. First undo the screw in the top of the door (see Fig. 3). The door can be removed when it is open between 40º
2. Pull the handles out and rotate to the side (see Fig. 4). and 105º. If there is limited space in front of the unit, the
3. The door can now be opened to hang open at 180º lock screw on the underside of the unit can be unscrewed
(see Fig. 5) or unhooked (see point 2.4). temporarily (see Fig. 6). Then the door can be pushed out
sideways (see Fig. 7).
The door is heavy, so take care when
Fig. 3 ! removing it.

Fig. 6

Fig. 4

Fig. 7

Fig. 5

MAX 180°

5
2.2 Floor-mounted unit
1. Make sure that hinge stops and a door strap are fitted
(see Fig. 8, 9 and 10).
2. Undo the screw in the top (see Fig. 11).
3. Pull the handles out and rotate to the side (see Fig. 4). Fig. 11
4. The door can now be opened to a maximum of 105º
(se Fig. 8).

Fig. 8

Fig. 9

Fig. 12

Fig. 13
Fig. 10 MAX 105°

MAX. 105°

6
2.3 Ceiling-mounted unit

Check first that hinge stops are fitted (see Fig.

! 14 and 15). If not, the door could fall off when
opened! Be careful!
Fig. 17
Note that a door strap also needs to be fitted if
the unit is mounted on the ceiling. This protects
the hinge stops against damage and prevents
the door from opening more than 105° (see Fig. 16).

1. First undo the screw in the top of the door (see Fig. 17).
2. Pull the handles out and rotate to the side (see Fig. 18).
3. The door can now be opened to a maximum of 105º (see
Fig. 19).

Fig. 14

Fig. 18

Fig. 15

Fig. 19

Fig. 16

MAX. 105°
X 105°

7
3 Overview of CI60 control panel

Fig. 20
8

4 9

1* 5 10

2 6 11

7 12

No. Description No. Description

1* Switch for increased ventilation 8 Potentiometer for adjusting extract air
at NORMAL speed
2 Switch for decreased ventilation
9 Potentiometer for adjusting supply air at
3 Indication of MAX speed
NORMAL speed
4 Indication of NORMAL speed
10 Switch for additional heating ON/OFF
5 Indication of MIN speed
11 Potentiometer for adjusting supply air
6 Indication of ALARM temperature
7 Indication of FILTER CHANGE 12 Switch to reset alarm
Nos. 8, 9 and 10 are used to adjust the unit before it
is used for the first time.

*The numbers are used as references in subsequent descriptions

8
4 CI60 in use
4.4 Temperature adjustment
4.1 General
The temperature required in the supply air can be set with
The control unit consists of a touch panel with pushbuttons, potentiometer 11. The adjustment range is 10 - 30 °C. Using
LEDs for indication and adjustment potentiometers and the factory settings is recommended.
switches for adjusting the ventilation unit. The control unit
communicates with the ventilation unit via a low-voltage If necessary, the ventilation unit’s heating can also be
cable. switched ON/OFF with switch 10. In this case only the rotating
heat exchanger is used as a source of heat. It is best to leave
it in ON position, as the unit will then respond automatically
4.2 Increasing/reducing air supply
when there is a need for additional heating.
Use switches 1 and 2 to increase and reduce the fan speed
and thus the air flow. Different speeds depending on the OFF
ON
operating situation.
ITEM 10
MIN Do not use during first year of operation, or
when the building is in use.
NORMAL Used under normal conditions. In this
setting, the air supply must be adjusted
according to current regulations. 4.5 Filter replacement
MAX Used if there is a need for increased air Every six months, LED 7 lights up to remind you that it is time
supply on account of increased occupancy to replace the air filters in the unit. See section 2 for more
or a higher humidity level, for example information on filter replacement.
during showering or when clothes are being
dried. This setting is usually used for limited After the activity has been carried out, the
periods of time. indicator must be reset. See more under the
Reset section.
The different speeds are indicated with LEDs 3, 4 and 5.
4.6 Alarm
4.3 Adjusting the air supply
If anything unforeseen occurs with the
At NORMAL speed level, the air flow must be adjusted
according to project data. Potentiometer 9 is used for the
ventilation unit, indicator 6 lights up.
The signal given by the indicator depends on the
!
supply air level and potentiometer 8 for the extract air level. reason for the indication.
The adjustment range is 20-100% of the maximum level
according to the scale of the potentiometer. A permanent light indicates:
• Fault return water detector (B5)
Factory settings: • Heat recovery fault (B)
MIN 50% (fixed)
A permanent light with indicator 5 (MIN speed) flashing
NORMAL 75% (variable)
indicates:
MAX 100% (fixed) • Fault supply air detector (B1)
• Fault extract air detector (B3)
Fig. 21 • Fault outdoor air detector (B4)

9 8
A flashing light indicates:
• Overheating thermostat fault (applies only to electric hea-
ting)
10 11 • Fault in external fire/smoke detector (accessory)
• Heat recovery fault (A)
• Additional heating fault (applies only if the unit has a water
battery)

9
4.7 Reset
After the filter has been replaced or the cause of the NB! If thermostat F10 trips, the unit will have to be
alarm repaired, the alarm must be reset. This is done by opened up and physically reset before resetting on
pressing switch 12. the panel. If the alarm trips repeatedly, contact the
service company or distributor. See chapter 1.4 for more
If the indicator goes out, the action has been carried out information.
correctly. If the indicator remains on, the fault has not
been repaired correctly.

5 Overview of CI600 control panel

Fig. 22

1* 7

2 8

3 9

No. Description
1* UP/INCREASE switch
2 BACK/CANCEL/NO switch
3 DOWN/DECREASE switch
4 5
4 OK/YES switch
5 HELP switch
6 Display
7 Indication of OPERATION/OK
-Green light
8 Indication of FILTER CHANGE
-Yellow light
9 Indication of ALARM
-Red light

*The numbers are used as references in subsequent descriptions

10
6 CI600 in use
6.1 General
The control unit consists of a colour display, pressure If you select a function that has numerical values, the
switches and indicators (LEDs). See figure on left for more current value is displayed with a light blue cursor. The value
information. The unit communicates with the ventilation unit is changed with buttons 1 and 3 and then confirmed by
via a low-voltage cable. pressing button 4.

6.2 Idle mode TIME AND DATE

The panel will go into idle mode if it is not used for a while.
TIME DAY MONTH YEAR
Operating information is displayed in idle mode. The panel
will come out of idle mode if one of the buttons is pressed.
13 : 45 04.07.09
04 07 09 OK?

A B C

13.08.2009
16:43 18°C 22°C
If several values can be changed, the cursor jumps to
the right when a selection is confirmed with button 4. The
procedure is repeated until all settings have been changed
to the desired values.

- NORMAL If you want to cancel a function or return to the previous

menu screen, use button 2.

Button 5 activates a help text that briefly describes the

current menu screen.
D E F
6.4 Startup
A. Time and date When the system is started, a special startup menu is
B. Outdoor air temperature opened.
C. Room temperature
D. Current speed
E. Additional heating activated/deactivated START MENU
F. Daily/weekly timer active LANGUAGE OK?
TIME AND DATE >
6.3 Menu navigation >
MAIN MENU
Buttons 1 and 3 are used to navigate through the menu
lines. The cursor is illustrated by the line being light blue. If
it is possible to make a selection on the current menu line,
this is displayed with OK? to the right of the line. A selection
is confirmed by pressing button 4. If a menu line contains
submenus, this is illustrated with a '>' sign at the end of the
line.
The basic language and date settings are set in this menu.
When this activity has been carried out, you choose to go to
SETTINGS the main menu.
TEMPERATURE >
TIMER >
6.5 Operating status
DAY/WEEK SETTINGS OK? In normal operation without problems, the green LED 7
TIME AND DATE > lights up to confirm that everything is working normally. How
LANGUAGE > any problems affect the system is described in subsequent
FILTER >
ALARM > sections.
ADVANCED USER >
OPERATING INFORMATION >

11
7 CI600 main menu
7.1 Fan speeds 7.2 Max timer
The main menu contains various choices. Most concern This menu item activates a function that increases the speed
fan speeds. The speed selected is indicated with large fan to MAX for a limited period before returning to the speed
symbols and bold text. selected previously. The period of time can be adjusted
under the SETTINGS menu item. This function is ideal during
MAIN MENU showering, for example, when there is a greater need for
extraction for a limited period.
MIN
NORMAL OK?
MAIN MENU
MAX
MAX TIMER MIN
NORMAL
M
MAX
M
MAX TIMER OK?
SETTINGS >

To change the speed, move the cursor with buttons 1 and 3.

SETTINGS >

MAIN MENU When the function is active, the time is counted down on the
MIN display. If you select TIMER OFF, the function will be cancelled
NORMAL and the speed will return to the previous selection.
MAX OK?
7.3 Settings
MAX TIMER
Under the SETTINGS menu item, you can adapt the system
as you want.

SETTINGS > SETTINGS

TEMPERATURE >
Then confirm your selection with button 4 and the speed se- TIMER >
DAY/WEEK SETTINGS OK?
lected will be highlighted with large fan symbols and bold font. TIME AND DATE >
LANGUAGE >
MAIN MENU FILTER >
ALARM >
MIN ADVANCED USER >
NORMAL
N
MAX
M OK?
MAX TIMER
M
7.4 Temperature
This is where the desired temperature of the supply air is set.
SETTINGS >
TEMPERATURE

MIN Must not be used when the home is in use. Must

not be used in the first two heating seasons.
NORMAL Used under normal conditions. On this setting
18 °C OK?

the air supply must be adjusted according to

current regulations.
MAX Used if there is a need for increased air supply HEATING ELEMENT ON/OFF >
on account of higher occupancy or a raised
humidity level, for example during showering
or when clothes are being dried. This setting is
normally used for limited periods.

12
A good rule is to adjust the temperature to max. 18° so that 7.6 Daily/weekly timer
the air is mixed optimally with the air already in the building. Programming the timer begins with selecting the day.

In the HEATING ELEMENT OFF/ON menu item, the additional

heating in the ventilation unit can be switched off. In such DAY / WEEK SETTINGS
case, only the rotating heat exchanger is used as a source of MONDAY
heat. TUESDAY OK?
WEDNESDAY
If necessary, the ventilation unit's heating can also be turned THURSDAY
off. In this case only the rotating heat exchanger is used as FRIDAY
a source of heat. It is best to leave it ON, as the unit will then
SATURDAY
respond automatically when there is a need for additional
SUNDAY
heating.

NB! This does not apply if the unit has a water battery. A new menu screen appears under each day.

If the heating element is switched off, this symbol is TUESDAY

displayed when the display enters idle mode.
1 08: 00-16 : 00 MIN 16°

HEATING ELEMENT ON/OFF 2 16 : 00- 18: 00 NORMAL 18°

3 18 : 00-19 : 00 MAX 16°
HEATING ELEMENT ON OK?
4 19 : 00-24 : 00 NORMAL 18°

Each day can be programmed with four different time

intervals. Adjust the start and stop times for each interval
and then adjust the desired speed and temperature. To
activate the interval, select a green tick. The interval will then
be active for the selected time and day of the week. A red
7.5 Timer cross means that the interval is not activated. If necessary,
then select another interval and repeat the procedure.
Here you set the time you want for the MAX TIMER function.
This is used when the function is activated from the main
menu. The following rules apply to the programming:
• An interval can never be started before the
previous one has ended.
TIMER • The stop time can never be before the start
time.

Once you have finished programming a day, repeat the

procedure for the other days.
60 min OK?

When the timer is active, this symbol is displayed

when the display enters idle mode.

If there is no new time interval registered after the finished

period, the speed and temperature return to the setting that
To adjust the time interval for MAX TIMER, see chapter 8.4 was previously active.
under "Timer".

13
7.7 Time and date The normal time is 6 - 12 months, depending on the
The time and date can be adjusted in this dialog. environment.

When the filter alarm is tripped, the yellow indicator 8 lights

TIME AND DATE up and an information text appears. Follow the instructions
TIME DAY MONTH YEAR
in the text. It is possible to go directly to this dialog from
the message or via the menu tree. After the alarm has been
reset, the countdown to the next filter change begins.
13 : 45 04.07.09
04 07 09 OK?
7.10 Alarm
If a problem occurs in the operation of the ventilation
unit, an alarm will be tripped. The red indicator 9 lights up
and an information text appears in the display. Follow the
instructions in the text. It is possible to go directly to this
dialog from the message or via the menu tree.
7.8 Language
The language selected can be changed in this dialog. NB! If thermostat F10 trips, the unit will have to be opened
up and physically reset before resetting on the panel. If the
alarm is tripped repeatedly, contact the service company or
LANGUAGE
distributor. See chapter 1.4 for more information.
NORSK
ENGLISH OK?
SVENSKA
ALARM
DEUTCH
RESET ALARM OK?
NEDERLANDS
SUOMI
DANSK

7.9 Filters
A reminder appears regularly on the display. In this dialog,
the time interval can be adjusted and the filter alarm reset. 7.11 Operating information
This general screen displays current temperature values,
FILTER whether the daily/weekly timer is active and activity as
INTERVAL CHANGE OF FILTER > 0-100% for cooling, heat exchanger and additional heating.
RESET FILTER ALARM OK?
OPERATING INFORMATION
SET TEMPERATURE 22°
DAY / WEEK SETTINGS AKTIV
SUPPLY AIR 22°
EXTRACT AIR 21°
OUTDOOR AIR 0°
RETURN WATER 35°
HEAT RECOVERY SYSTEM 100%
COOLING 0%
INTERVAL CHANGE OF FILTER HEATING 100%

6 MND OK?

14
8 CI600 advanced user menu
Regulation type
NB! For more information on the ”Advanced If supply air regulation is selected, no further settings can
User” menu, refer to the ”CI600 Reference be set here. If extract air regulation is selected, the max. and
Manual” on Flexit’s homepage. min. supply air temperatures can also be specified.

8.1 PIN REGULATION TYPE

To access the menu item, you need to enter the PIN 1 0 0 0.
REGULATION EXTR OK?
MAX SUPPLY AIR TEMP 35°
PIN CODE MIN SUPPLY AIR TEMP 15°

1 0 0 0 OK?

Cooling

NB! Flexit does not supply or project cooling

machines.
8.2 Advanced user
This menu contains functions for monitoring, configuration In this dialog, the cooling function is activated and the
and troubleshooting. Information to do with adjustment parameters MIN OUTDOOR AIR TEMP for supply of cooling
can be found in the installation instructions. Complete and MIN SPEED for supply of cooling are specified. If a DX
documentation of all menus, including configuration for cooling machine is used, the supply delay interval can be
accessories and extras, etc., is described in the CI600 specified.
reference manual, which is available at www.flexit.no.
COOLING
ADVANCED USER COOLING AV OK?
MIN OUTDOOR TEMP 18°
TEMPERATURE REGULATION > MIN SPEED MIN
FAN REGULATION OK? RESTART DELAY 180 s
CONFIGURATION > COOLNESS RECOVERY >
OPERATING TIME >
FACTORY SETTINGS >
SERVICE >

It is also possible to activate a function to recover cooling

in the building using the rotating heat exchanger. Enter
8.3 Temperature regulation the desired difference between the outdoor and indoor air
temperatures for when the function is activated.
In this menu screen, you configure the temperature
regulation and cooling functions.
COOLNESS RECOVERY
TEMPERATURE REGULATION COOLNESS RECOVERY OFF OK?
DIFF 1°
REGULATION TYPE >
COOLING >
NEUTRAL ZONE OK?
EXT. TEMP. CONTROL >

15
Neutral zones
To achieve more even temperature regulation, the Adjustment (supply air and extract air)
neutral zones can be set in this menu. This dialog is identical for the supply air and extract air
fans. The fans are adjusted individually to the desired
NEUTRAL ZONE capacity for the respective speed.

COOLNESS RECOVERY 2° OK? SUPPLY AIR

HEAT RECOVERY SYSTEM 1°
MIN SPEED 50% OK?
NORMAL SPEED 75%
MAX SPEED 100%

External temperature control

Control of the temperature settings from an overall
system must be entered in this menu. In this case, the Factory settings:
temperature settings in the control unit are overridden. MIN 50%
NORMAL 75%
EXT. TEMP. CONTROL MAX 100%
EXT. TEMP. CONTROL OFF OK?
Timer
Settings are entered in this menu for the speed and time
that are to apply to the ‘MAX TIMER’ function in the main
menu.

TIMER
STANDARD SPEED MAX OK?
STANDARD TIME 30 m

8.4 Fan control

The fans are selected and configured in this menu screen.

FAN REGULATION
SUPPLY AIR >
EXTRACT AIR >
TIMER OK? Air flow rate compensation
AIR VOLUME COMP >
This function can be activated via an input on the control
card. The speeds required for each fan are selected here.
The function can be used with a kitchen fan or other
device that requires additional supply air.

AIR VOLUME COMPENSATION

SUPPLY AIR MAX OK?
EXTRACT AIR MIN

16
8.5 Configuration
The general configuration is set in this menu screen. Fire/Smoke
This function requires an external sensor to be connected
CONFIGURATION to the control card.
SENSORS >
FIRE/SMOKE > FIRE/SMOKE
COMMUNICATION OK?
START/STOP SEQUENCE > MODE 1 OK?
REST MODE >

Sensors
The temperature sensors can be calibrated in this menu
to be better coordinated with the real situation, and a
pressure sensor is activated as a pressure guard instead Mode Supply air fan Extract air fan
of the integrated time control. 1 STOP STOP
2 MAX MAX
SENSORS
3 STOP MAX
SUPPLY AIR >
4 MAX STOP
EXTRACT AIR >
OUTDOOR AIR OK?
RETURN WATER > Communication
FILTER GUARD > Proceed to the “HOME/AWAY”submenu. This function can
be used to make the unit run on other operating settings
using an external switch.

NB! The settings have no effect unless an external switch

is connected.
The menu screen is identical for all temperature sensors
and they can be adjusted within an interval of 5 °C. The settings are entered for the AWAY selection. Speed
and temperature can be selected, plus how long after
SUPPLY AIR activation the new setting should take effect.

CALIBRATION 0 OK?
COMMUNICATION
HOME/AWAY OK?

If the pressure guard is activated, an external sensor must

be connected to the control card. The sensor replaces
the integrated filter time control.

FILTER GUARD
ACTIVATION OFF OK?

17
Standby mode De-icing
In this menu you can adjust the time it takes before the Activates/deactivates the function.
display enters idle mode.
Start temperature
REST MODE The start temperature for the defrosting function is set here.
The temperature in question is the outdoor temperature.
TIME DELAY 2 min OK?
Period time
Period time for de-icing operation.

Frequency
Decides how many times the period shall be repeated per
hour.

Rotor speed
When the start temperature has been reached, the speed of
8.6 Operating time the drive motor of the rotating heat exchanger is reduced to
This menu screen displays the ventilation unit’s total the specified RPM.
operating time and how much time has passed since the
last filter replacement. Start fan reduction
As an additional safety function, the speed of the supply
air fan can be reduced. This takes effect at the set outdoor
OPERATIONS COUNTER temperature.
Period time
OPERATING TIME 459.7 TIM Period time for de-icing operation.
FILTER 459.7 TIM
Frequency
STOP 0.0 TIM
MIN 123.0 TIM Decides how many times the period shall be repeated per
NORMAL 161.4 TIM hour.
MAX 178.0 TIM
ROTOR 0.4 TIM Fan speed
HEATING ELEMENT 0.3 TIM As an additional safety function, the speed of the supply
air fan can be reduced. This takes effect at the set outdoor
temperature.

8.7 Service
De-icing - Parameters
Passwords are only revealed in consultation
with Flexit's service department. Parameter Default Range Unit
De-icing OFF OFF/ON
De-icing Start temperature -9 (-5)–(-45) °C
The integrated de-icing function is not activated at the Period time 60 1–60 min
time of delivery of the ventilation unit.
Frequency 1 1–10 no./hour
The function can be configured and activated in this
menu screen. Rotor speed 15 15–180 rpm
Fan reduction -14 (-5)–(-45) °C
Search path for menu selection: Period time 60 1–60 min
MAIN MENU/SETTINGS/ADVANCED USER/SERVICE/DEFROSTING
Frequency 1 1–10 no./hour
Fan speed 50 20–100 %
DE-ICING
DE-ICING OFF OK?
START TEMPERATURE -9°
PERIOD TIME 60 min
FREQUENCY 1/TIM
ROTOR SPEED 15
START FAN REDUCTION -14°
PERIOD TIME 60 min
FREQUENCY 1/TIM
FAN SPEED 50%

18
8.8 Menu tree

Fig. 23
MAIN MENU

TEMPERATURE HEATING ELEMENT ON/OFF

TIMER
MONDAY
DAY/WEEK SETTINGS
SUNDAY
TIME AND DATE

LANGUAGE
RESET FILTER ALARM
FILTER
FILTER CHANGE INTERVAL
ALARM

ADVANCED USER

PIN REGULATION TYPE

COOLING COOLING RECOVERY

NEUTRAL ZONE

TEMPERATURE REGULATION EXT. TEMPERATURE CONT.

FAN CONTROL SUPPLY AIR

CONFIGURATION EXTRACT AIR

OPERATING TIME TIMER

FACTORY SETTINGS AIR FLOW RATE COMP.

SERVICE SUPPLY AIR

EXTRACT AIR

OUTDOOR AIR

RETURN WATER

SENSORS FILTER GUARD

FIRE/SMOKE

COMMUNICATION HOME/AWAY

START/STOP SEQUENCE

IDLE MODE

SYSTEM INFORMATION

PRODUCTION DATA

TEST

ALARM

SPECIAL FUNCTIONS

DE-ICING

PARAMETERS

19
9 Cleaning and maintenance Fig. 24

Before opening the door: Switch off the heat, let

! the fans continue for 3 minutes to remove hot
air, unplug the unit and wait 2 minutes before
opening the doors.
1
9.1 Changing the filters
The filters have a limited life, and to preserve a healthy
indoor air quality it is important to change them when
they are dirty.

How often the filters need to be changed depends on the

degree of contamination of the air where they are installed. In
general, the filters need to be changed at least once a year,
preferably in the autumn (after the pollen season). In areas
2 Drawer
with a lot of dust and contamination, the filters should be
changed in the spring and autumn.
Filter

Dirty filters can, among other things, lead to:

• Reduced performance of the unit Seal
• The unit becoming dirty
• Humidity damage in the home
• Reduced indoor air quality

A filter subscription is recommended to ensure full benefit

from the system. The order no. for a new set of filters is
111738. Both filters should always be changed.

To take out the filters: Check that the seal is intact before inserting the
1. Pull the filter drawer out as far as it will go (see Fig. 24). filter. Then push the filter drawer properly into
The drawer does not have to be removed completely. place to prevent air leakage.
2. The filter is now loose and can be removed.
3. Put a new filter in and push the drawer properly into place.

Make sure that the filter is not damaged during

fitting. Use the filter's outer edge to push it in. A
damaged filter reduces the unit's effect and the
air's purity.
Rotor
Fig. 25
When changing the filter, check that the
whole unit is working normally.

Use the following checklist:

• Check that the rotor is rotating. Turn
the rotor in the direction of rotation as
shown on the rotor cassette (see Fig. 25).
• If necessary, clean the rotor
(see chapter 9.4).
• Check that the fans are clean
(see chapter 9.2).

20
9.2 Cleaning the fans
The fans must be cleaned at least once a year. Clean the Fig. 26
fan blades with a grease solvent on a cloth (e.g. methylated
spirits) and compressed air if possible. NB! Do not use water.

To take out the top fan:

1. Pull out the electric quick-release contact for the fan
(see Fig. 26).
2. Press down the hook on the spring under the fan housing
and pull the housing sideways (see Fig. 27-1 and 27-2).
Then take the fan housing out of the unit. Take care not
to damage the seal when you pull the fan housing out.

To take out the bottom fan:

1. Pull out the electric quick-release contact for the fan
(see Fig. 26).
2. Undo the safety screw and pull the fan housing out
of the unit (see Fig. 27-1 and 27-2). Take care not to
damage the seal when you pull the fan housing out.

To put the fan back, follow points 1 and 2 in reverse order.

21
Fig. 27

Seal
Fan

2
1

2
1
Fan
Seal

22
Fig. 28

23
9.3 Changing the brush strips Fig. 29
The brush strips become worn over time. If they do
not sit tightly against the rotary wheel-type heat
exchanger, it may be necessary to change them
(product code 102686). Alternatively, they can be
moved closer to the rotor, as the aluminium profile they
are mounted in has two grooves.

Unplug before starting!

!

Proceed as follows:

1. Undo the screw for the electric cover (see Fig. 28-1)
and take the cover off.
2. Disconnect the rotor's quick-release contact from
the circuit board by pressing the release down and Fig. 30
pulling the contact (see Fig. 28-2).
3. Undo the safety screw for the rotor module
(see Fig. 28-3).
4. Pull the rotor module straight out.
5. Remove the screw in the centre of the aluminium
level 1
profile and pull the profile out (see Fig. 29).
6. Pull the brush strips out of the groove. Move them
up from level 1 to level 2 (see Fig. 30), or replace
them with new ones if they are completely worn out.
level 2

24
9.4 Tightening of rotor belt Fig. 31
Proceed as follows:

1. Remove qty. 2 screws in the plate on the outer side

of the rotor cassette (see Fig. 31).
2. Remove qty. 4 screws in the rotor cassette in order
to loosen the rotor motor bracket (see Fig. 32).
3. Screw out the Allen screw in the drive roller (see Fig.
33) and pull out the drive roller (see Fig. 34).
Note: Do not screw the drive roller all the way
in when it is screwed in again. Leave 1-2 mm of Fig. 32
clearance mm to the rotor motor bracket.
4. Screw out the screws (qty. 4) that fasten the rotor
motor to the bracket and move the screws to the
uppermost holes (see Fig. 35), and the rotor belt
will consequently be tightened when the parts are
mounted back in place.

9.5 Cleaning the rotor

As the unit has high impermeability filters installed,
it is not usually necessary to clean the rotor. If, for
various reasons, it should still be necessary, dust can be
removed with a soft brush. Further cleaning is possible by
removing the rotor, spraying it with a grease solvent and Fig. 33
then blowing it clean from the opposite side. Distance
approximately 60 mm and max. pressure 8 bar. Ensure
that the motor is not exposed to water during cleaning.
Ensure that all seals around the rotor are intact and
tight. Ensure that there is no damage to the rotor belt,
and that the rotor rotates freely.

9.6 External cleaning

Many kitchen surface cleaners contain chemicals
that may damage the product’s plastic components.
Therefore use a soft cloth moistened with warm water
Fig. 34
and a neutral detergent to clean the outside of the
product.

Do not use abrasive cleaners or scouring

powder, as such products can damage the
surfaces. Cleaners containing ammonia
or citrus must not be used. Products that give
stainless steel an anti-fingerprint coating must not
be used either.
Fig. 35

25
10 Maintenance table
Component Action Interval
Filter Filters must be changed at least once a year. It is best to change them twice a year, before and after the 6-12
pollen season. Check that the filter seal is completely tight. months
Fans Fans must be cleaned at least once a year to maintain fan efficiency. 12 months
Rotary wheel- Check that the surfaces are clean. Check that the sealing strips face in towards the rotary wheel-type 12 months
type heat heat exchanger. Check that the rotor belt is intact and not too slack.
exchanger
Kitchen hood* Wash the grease filter. Check that the damper is clean and closes fully. 2 weeks
Seals Check that the seals on the door, under the filters, on the fan modules and on the rotor module are intact. 12 months
Valves The supply air and extract air valves (for the bathroom, bedroom, laundry room, etc.) must be cleaned at 12 months
least once a year.
Air intake Check that no leaves and other items have caught on the grille. 12 months
In periods of sea smoke during winter the air intake can freeze up. If necessary it must be scraped clean so
that the air can pass through.
Roof cowl If the unit has a roof cowl, this must be checked for leaves and the like. Also check that the drain slots are 12 months
open.
Ducts Check that the ducts are clean. 10 years
Brush strips Check that the brush strips are intact and sit tightly against the rotor. If they are worn, they can be moved 3 years
to the next groove in the profile so that they are closer to the rotor.
Inside unit A combination of a very low outside temperature and damp extract air can lead to the formation of
ice. Normally this will not be a problem - when normal operating conditions return the ice crystals will
be converted to steam and removed from the unit via the exhaust air. In the case of extreme cold over
extended periods the unit should be checked for ice.
Capacitor In the electrical compartment there are two cylindrical electrical components called capacitors. The 5 years
life span of these components are limited to about 5 years, after which they will need to be replaced. An
exhausted capacitor may damage the fan motor.
The capacitors must be replaced by a professional.
New capacitors can be ordered from Flexit (art. no. 110354).

*For units with extract air from the kitchen hood connected to the unit.

11 Troubleshooting
Type of fault Remedial action
Cold draughts Check what supply temperature has been selected. See control panel.
Check that the rotor is rotating.
Check that heating comes on.
New extract filter needed.

Fans not working Check that power is connected to the unit.

Check that the overheating thermostat has not cut out.
Reset by pressing the button. Must also be reset on the automatic panel. See chapters 1.4, 4.7 and 7.10.

Low air flow rate Check what speed the unit is set to.
Check that the filters are tight.
Check the intake grille.

26
12 CE Declaration of Conformity

This declaration confirms that the products meet the Compliance with valid versions of the following standards on
requirements in the following Council Directives and the date on which the declaration of conformity was signed:
standards: Safety standard: EN 60335-1
2014/30/EC Electromagnetic Compatibility (EMC) EN 60335-2-80
2014/35/EC Low-voltage Directive (LVD)
1253/2014 Ecodesign regulation EMF standard: EN 62233
1254/2014 Energy labelling regulation EMC standard: EN 55014-1
EN 55014-2
Our products have been tested in accordance with parts of: EN 61000-3-2
2006/42/EC Machinery Directive (Safety) EN 61000-3-3

Producer: FLEXIT AS, Televeien 15, The product is CE-marked: 2011

1870 Ørje, Norway

Type: UNI 2 R Ventilation unit FLEXIT AS 29.11.2016

Frank Petersen
CEO

The right to give notice of lack of conformity applies to this product in

accordance with the existing terms of sale, provided that the product is
correctly used and maintained. Filters are consumables.

The symbol on the product shows that this product must not be
treated as household waste. It must be taken to a reception station
for recycling of electrical and electronic equipment.
By ensuring correct disposal of the equipment, you will contribute
to preventing negative consequences for the environment and
health that incorrect handling may entail. For further information
on recycling of this product, please contact your local authority, your refuse
collection company or the company from which you purchased it.

Notice of lack of conformity as a result of incorrect or defective installation must

be submitted to the installation company responsible. The right to give notice of
lack of conformity may lapse if the system is used incorrectly or maintenance is
grossly neglected.

27
Flexit AS, Televeien 15, N-1870 Ørje www.flexit.no