Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    Becdd 0369 C

    Uploaded by

    HichamSalama
    HPB-0354 is a high density polyethylene designed for blow molding applications like detergent containers. It has medium swell for easy processing, excellent balance of impact strength and stiffness, and complies with FDA food contact regulations. Recommended processing is 160-180°C with mold temperature of 10-30°C. It is suitable for medium size containers used for detergents, bleach, antifreeze, and more.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Becdd 0369 C

    Uploaded by

    HichamSalama
    21 views1 page
    HPB-0354 is a high density polyethylene designed for blow molding applications like detergent containers. It has medium swell for easy processing, excellent balance of impact strength and stiffness, and complies with FDA food contact regulations. Recommended processing is 160-180°C with mold temperature of 10-30°C. It is suitable for medium size containers used for detergents, bleach, antifreeze, and more.

    Original Title

    becdd0369c

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    HPB-0354 is a high density polyethylene designed for blow molding applications like detergent containers. It has medium swell for easy processing, excellent balance of impact strength and stiffness, and complies with FDA food contact regulations. Recommended processing is 160-180°C with mold temperature of 10-30°C. It is suitable for medium size containers used for detergents, bleach, antifreeze, and more.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    21 views1 page

    Becdd 0369 C

    Uploaded by

    HichamSalama
    HPB-0354 is a high density polyethylene designed for blow molding applications like detergent containers. It has medium swell for easy processing, excellent balance of impact strength and stiffness, and complies with FDA food contact regulations. Recommended processing is 160-180°C with mold temperature of 10-30°C. It is suitable for medium size containers used for detergents, bleach, antifreeze, and more.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Technical Data Sheet

    HPB-0354
    High Density Polyethylene
    HPB-0354 is a certified prime grade Phillips Process BLOW MOLDING copolymer designed to meet end-use
    requirements of containers for packaging of Household Industrial Chemicals (HIC). HPB-0354 features medium swell,
    easy and consistent processability in conventional continuous or intermittent extrusion equipment, and excellent balance
    of bottle ESCR, Impact strength and Stiffness. Applications include medium size containers for detergents, bleach,
    antifreeze, motor oil and ice chests. HPB-0354 recommended processing temperature is 160 to 180°C., with mold at
    10 to 30°C. HPB-0354 complies with FDA regulation 21CFR 177.1520 (c) 3.1 (a) + 3.2 (a) and with most international
    regulations concerning the use of Polyethylene in contact with food articles.

    Typical Properties

    PROPERTIES* ASTM UNIT NOMINAL


    TEST ENGLISH (METRIC) VALUES

    RESIN
    U

    Melt Index, 190°C/2.16 kg D 1238 gr./10 min 0.35


    Melt Index (HLMI), 190°C/21.6 kg D 1238 gr./10 min 30.0
    Density D 1505 gr./cm3 0.954

    MOLDED SPECIMEN *
    U U

    Tensile Strength @Yield² D 638 psi (MPa) 3900 (27)


    Flexural Modulus¹ D 790 psi (MPa) 195000 (1344)
    Ultimate Elongation² D 638 % >700
    Tensile Impact D 1822 ft.lb/in.² (kJ/m²) 98 (205)
    ESCR³ (F50) D 1693B hrs. 50
    Low temp. brittleness D 746 °C. <-90
    Vicat softening point D 1525 °C. 127
    HDT @ 0.46 N/mm² D 648 °C. 74

    TYPICAL VALUE OF PROPERTIES NOT TO BE CONSTRUED AS SPECIFICATIONS.


    * - Test specimens from compression molded plaque according to ASTM D 1928 Procedure C.
    1 - 1% secant @ 1.3 mm/min. speed.
    2 - @ 50 mm/min.
    3 – 100% Igepal, notched Bent Strip, 1.75 mm thick, 50°C.
    THIS PRODUCT DATA SHEET EFFECTIVE AUGUST 2009 SUPERSEDES ALL DATA PREVIOUSLY PUBLISHED

    The technical information, suggested uses and applications presented are made without charge and are believed to be reliable;
    however, H. Muehlstein & Co., Inc. disclaims responsibility for results of use of this information. H. MUEHLSTEIN & CO. INC. MAKES
    NO WARRANTIES, EITHER EXPRESS OR IMPLIED, CONCERNING OUR MATERIALS, INCLUDING ANY WARRANTIES OF
    MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. H. Muehlstein & Co. expressly disclaims any statements or
    suggestions as being inducement. All users should rely upon their own test in determining suitability.

    The Global Leader in Polymer Distribution

    World Headquarters: 800 Connecticut Avenue, Norwalk, CT USA 06854-1631


    Phone: (203) 855-6000 Fax: (203) 855-6222 E-mail: webmasterHM@muehlstein.com

    You might also like