Eaton DC Power Solutions

The SC200 series of system

controller offers highly advance
 19” sub-rack control and monitoring features
. including Smart Alarms – a
 Modular 3U and 6U options
®
The Eaton 3G Access Power configurable logic for
 Up to 6 rectifier modules
Solutions are ideal for low to automated site energy control.
 Pre-configured software The SC200 also offers a
medium power telecommuni-
 High power density (24/48V: 300/250A, 6U, 19”) cations applications, offering complete array of
 Multiple AC option (1Ø, 3Ø, 2Ø) compact, efficient, flexible and communications options with
reliable secure DC power Ethernet, GSM cellular
 Fast on-line expansion of rectifiers (hot-swap) (including text messaging),
supply.
 High efficiency and unity power factor standard modem and TCP/IP
 Priority and non priority options for DC distributions These 19” rack mount systems communications options. The
are available with up to 3 or 6 of slightly lower specification
 Compatible with Eaton Energy Saver (ES) Rectifiers the Eaton 3G Access power SC100 is also available.
rectifier modules as either 24V
or 48V with output up to 280A. Typical applications include
For superior operating providing secure power for
efficiency to further reduce customer premises equipment,
operating costs, these systems roadside terminals, data
are also compatible with Eaton networks and IP routers. The
Energy Saver (ES) Access 3G Access Power Solutions are
power rectifiers which provides pre-configured and all system
operating efficiency in excess settings are fully adjustable in
of 96%. software and stored in
transferable, configuration files
The systems include an integral for repeatable and quick one-
DC distribution panel with a step system set-up.
range of MCB and Low Voltage
Disconnect (LVD) options
available.
Input Software
AC Supply† 100 – 240V, 50 – 60Hz (nominal) DCTools Configuration software.
175 – 275V full power output up to 50°C [122°F] Free download from:
90 – 175V reduced power output www.powerware.com/downloads
Power Factor† >0.99 (50 – 100% Output Current) PowerManagerII Remote control and monitoring software
Efficiency† APR48-3G : 92% (50 – 100% Output Current)
APR48-ES : >96% peak, Certifications
>95% (20% to 100% load, 230Vac) All products comply with international standards.

Output
DC Output 21.5V – 32V / 43-57.5V In the interests of continual product improvement all specifications are
Voltage Range subject to change without notice.
DC Output APS3-300 48V: 6.00kW
Power 24V: 4.32kW
(maximum)* APS6-300 48V: 8.90kW
APS6-500 48V: 12.0kW
24V: 8.64kW
* Ratings are stated without LVD’s fitted. In some
cases lower ratings may result when LVDs are
used. Refer to installation guide for detailed load
specs and MCB derating factors.

Environmental
Operating -40°C to +70°C [-40°F to +158°F]
Temperature
Range* * Refer to rectifier data sheet for more information.
Output current is derated above 50°C [122°F] and
below -10°C [14°F]

Mechanical
Dimensions APS3-300: 3U, 19” mounting, 315mm [12.4”]*
H,W,D APS6-300: 6U, 19” mounting, 335mm [13.2”]*
APS6-500: 6U, 19” mounting, 335mm [13.2”]*

* Additional clear space is required for exhaust air.

System
System SC200 or SC100
Controller
DC Distribution APS3-300: 12-way circuit breakers
Module (2 x battery, 10 x load)
APS6-300: 20-way circuit breakers
(4 x battery, 16 x load)
APS6-500: 20-way circuit breakers
(4 x battery, 16 x load)
Communication USB direct*
Features 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-
TCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem
not included)
*SC200 only
Low Voltage APS3-300: optional battery LVD
Disconnect APS6-300: optional 200A LVD’s for battery
(LVD) or load, or both.
APS6-500: optional 400A LVD’s for battery
or load, or both.
Rectifier Blank For unused rectifier positions
Panels
Options External Surge Protection

† Power factor, efficiency, AC voltage range and output power is

dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.
.

Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
Email: dc.info@eaton.com © 2012 Eaton Corporation All Rights
Internet: www.dcpower.eaton.com Reserved APSX-300 J
 Eaton DC Power Solutions

3G Access Power Solutions -

APS3-400 Series

The Eaton® 3G Access Power The advanced SC200 system

Features Solutions are ideal for low to controller offers high-level
medium power telecommuni- communications capability for
• Compact and scalable 19” sub-rack solution cations applications requiring real time information. It also
• High power density (6kW @ 48V/3U, 19”) compact, efficient and flexible has built-in intelligence for
• Easy plug-and-go rectifier set-up DC power supplies with or optimizing system efficiency,
without batteries. and comprehensive alarm and
• Fast on-line rectifier expansion (hot-plug)
system status notifications,
• High efficiency and unity power factor This Eaton 3G Access Power
which are all designed to
Solution 400 series has UL and
• Single AC input or individual rectifier feeds minimize operational expenses.
FCC standards certifications. A
• Intelligent system management features technician friendly user- A comprehensive range of
• Remote access (TCP/IP, web browser, SNMP) interface includes a full color other controller features
menu screen and is ensures maximum battery life
• Pre-configured software for quick & simple deployment
preconfigured for fast install and optimum system
• Onboard energy management software optimizes operating and easy commissioning. All performance under a wide
efficiency for lower OPEX system settings are fully range of environmental
• Compatible with Eaton Energy Saver (ES) Rectifiers adjustable in software and conditions.
stored in transferable
The 19” rack mount system is
configuration files for
ideal for rapid deployment into
repeatable one-step system
customer facilities or
set-up.
enclosures.
With up to 6kW of power
Typical applications include
output, it features state-of-the-
standby power for customer
art 48V 3G or Energy Saver (ES)
premises equipment, outdoor
Access Power Rectifiers for
power plants, data networks
superior operating efficiency
and IP routers.
(>96%). The DC distribution
panel, simple to use hydraulic
magnetic circuit breakers, and
optional low voltage disconnect
(LVD) modules are fully
integrated.
Technical Specifications
Input Software
AC Supply† Nominal: 120V, 208-240V DCTools Configuration software.
Operating Range: 90V – 275V* Free download from:
www.powerware.com/downloads
* Output power derates below 175V AC. PowerManagerII Remote control and monitoring software
Power Factor† >0.99 (50 – 100% Output Current)
Efficiency† APR48-3G : 92% (50 – 100% Output Current) Certifications
APR48-ES : >96% peak, All products comply with International Standards including UL (US and
>95% (20% to 100% load, 230Vac) Canada) and FCC (Class B) Verification.
Total Harmonic <5% THD from 50% to 100% at load.
Distortion In the interests of continual product improvement all specifications are
subject to change without notice.
Output
DC Output 43 – 57.5V
Voltage Range
DC Output APR48-3G : 120V AC: 3.3kW @ 48V
Power 208-240V AC: 5.4kW @ 48V
(maximum)† APR48-ES : 120V AC: 3.45kW @ 48V
208-240V AC: 6kW @ 48V

Environmental
Temperature Rated: -10°C – +50°C [14°F – +122°F]
Range* Extended: -40°C – +65°C [-40°F – 149°F]

* Output current is derated above 50°C [122°F]

Mechanical
Dimensions 3U [5.25”, 133mm], 19” [483mm] mounting,
H,W,D 14” [356mm]*

* Additional clear space is required for exhaust air.

Rear access is required for cable terminations.

System
System SC200 as standard.
Controller SC100 optional.
DC Distribution 10-way circuit breakers (2 x Battery, 8 x Load).
Module Load circuit breakers: Heinemann AMIR Series
5A,10A, 20A, 30A, 40A, 50A, 70A, 80A, 100A.
Battery circuit breakers: Heinemann AMIR 100A or
AMIP 120A.
Communication USB direct*
Features 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-
TCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem
not included)
*SC200 only
Low Voltage Battery disconnect: 200A internal.
Disconnect
(LVD)
Rectifier Blank For unused rectifier positions.
Panels
Options Relay Rack
Batteries.

† Power factor, efficiency, AC voltage range and output power is

dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.

Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.

© 2010 Eaton Corporation

Email: dc.info@eaton.com All Rights Reserved
Internet: www.eaton.com/telecompower APSX-400 D
 Eaton DC Power Solutions

The Eaton® 3G Access Power The APS6-400 series has up to

 High power density (12kW @ 48V/6U, 19”)
Solutions are ideal for low to 12kW of power output, it
 Suitable for both 19” relay rack or enclosed cabinet medium power telecommuni- features state-of-the-art 48 volt
 High efficiency and unity power factor cations applications requiring 3G Access Power Rectifiers, an
 Easy fit plug-in hydraulic/magnetic circuit breakers. compact, efficient and flexible integral DC distribution panel,
DC power supplies with or easy to fit plug-in hydraulic
 20-way load and 6-way battery distributions without batteries. Typical magnetic circuit breakers, and
 Single or dual low voltage disconnect (LVD) options applications include standby DC optional low voltage disconnect
 SC200 or SC100 intelligent system controller power for customer premises (LVD) modules for battery and
equipment, outdoor power non priority loads.
 Onboard energy management software optimizes operating plants, data networks and IP
efficiency for lower OPEX The advanced system controller
routers.
 Pre-configured software for quick & simple deployment offers high-level
A technician friendly user- communications capability for
 Remote access (TCP/IP, web browser, SNMP) interface includes a full color real time information. It also
 Easy plug-and-go rectifier set-up menu screen and is has built-in intelligence for
 Fast on-line rectifier expansion (hot-plug) preconfigured for fast install optimizing system efficiency,
and easy commissioning. and comprehensive alarm and
system status notifications,
The 19” rack mount system is
which are all designed to
ideal for rapid deployment into
minimize operational expenses.
customer facilities or
enclosures. Other features include
temperature compensated
All system settings are fully
voltage output, automated
adjustable in software and
equalize charging, and
stored in transferable
integrated battery testing, for
configuration files for
maximum battery life under a
repeatable one-step system
wide range of environmental
set-up.
conditions.
Input Software
AC Supply† Nominal: 120V, 208-240V DCTools Configuration software.
Operating Range: 90V – 275V* Free download from:
www.powerware.com/downloads
* Output power derates below 175V AC. PowerManagerII Remote control and monitoring software
Power Factor† >0.99 (50 – 100% Output Current)
Efficiency† By system rectifier type: Certifications
APR48-ES: >95% (20 - 100% output current) North America: UL listed 1801, cUL, FCC
APR48-3G: 92% (50 - 100% output current)
Total Harmonic <5% THD from 50% to 100% at load. In the interests of continual product improvement all specifications are
Distortion subject to change without notice.

Output
DC Output 43 – 57.5V
Voltage Range
DC Output Rectifier type: APR48-3G APR48-ES
Power 110/120V AC: 6.6kW @ 48V 6.9kW @ 48V
(maximum) 208-240V AC: 10.8kW @ 48V 12kW @ 48V

Environmental
Temperature
Range Rated: -10°C to +45°C [14°F to +122°F]

Mechanical
Dimensions 6U [10.5”, 267mm], 19” [483mm] mounting,
H,W,D 15.3” [390mm]*

* Additional clear space is required for exhaust air.

Rear access is required for cable terminations.

System
System SC200 as standard.
Controller SC100 optional.
DC Distribution 26-way circuit breakers (6 x Battery, 20 x Load).
Module Load circuit breakers: Heinemann AMIR Series
5A,10A, 20A, 30A, 40A, 50A, 70A, 80A, 100A, 120A
(2-pole).
Battery circuit breakers:
6 x Heinemann AMIR 80A, 100A
or 3 x Heinemann AMIP 120A, 150A, 200A.
Communication USB direct.
Features of 10BaseT Ethernet, TCP/IP, SNMP, On board web
SC200 server.
RS232 to external PSTN or GSM modem (modem
not included).
Low Voltage Battery disconnect: 400A internal.
Disconnect Non priority load: 200A internal.
(LVD) (Optional)
Rectifier Blank For unused rectifier positions.
Panels
Options Relay Rack
Batteries.

† Power factor, efficiency, AC voltage range and output power is

dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.

Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
Email: dc.info@eaton.com © 2011 Eaton Corporation All Rights
Internet: www.eaton.com/dcpower Reserved APS6-400 D
Eaton DC Power Solutions

optimizing system efficiency,

and comprehensive alarm and
system status notifications,
The Eaton® 3G Access Power which are all designed to
Solutions are ideal for low to minimize operational expenses.
medium power telecommuni-
A comprehensive range of
cations applications, offering
other controller features
compact, efficient, flexible and
ensures maximum battery life
reliably secure DC power
and optimum system
supply.
performance under a wide
This 19” rack mount system range of environmental
has an integrated distribution conditions.
panel and is available with up to
The 3G Access Power
12 of the 48V Eaton 3G Access
Solutions are pre-configured
Power Rectifier modules or, for
and all system settings are fully
superior operating efficiency,
adjustable in software and
with Energy Saver (ES) Rectifier
stored in transferable,
modules with output up to
configuration files for
360A.
repeatable and quick one-step
The advanced SC200 system system set-up.
controller offers high-level
Typical applications include
communications capability for
providing secure power for
real time information. It also
cellular base stations, roadside
has built-in intelligence for
terminals, data networks and IP
routers.

 Compact 9U, 19” sub-rack

 Up to 12 rectifier modules
 Compatible with Eaton Energy Saver (ES) Rectifiers
 Pre-configured software
 High power density (400A/9U)
 Dual AC input
 Fast on-line expansion of rectifiers (hot-swap)
 High efficiency and unity power factor
 Priority and non priority options for DC distributions
Input Software
AC Supply† 100 – 240V, 50 – 60Hz (nominal) DCTools Configuration software.
175 – 275V full power output up to 50°C [122°F] Free download from:
90 – 175V reduced power output www.powerware.com/downloads
Dual AC input - 1Ø, 2Ø or 3Ø (one supply feed per PowerManagerII Remote control and monitoring software
6-rectifier shelf)
Power Factor† >0.99 (50 – 100% Output Current) Certifications
Efficiency† APR48-3G : 92% (50 – 100% Output Current) All products comply with international standards. Contact your local
APR48-ES : >96% peak Eaton DC representative for details on the specific product versions
>95% (20% to 100% load, 230Vac) available with these safety and EMC approvals:

Output Europe CE
DC Output 43 – 57.5V Australia / C-tick
Voltage Range New Zealand
DC Output APR48-3G : 17.2kW @ 48V
Power APR48-ES : 17.2kW @ 48V In the interests of continual product improvement all specifications are
(maximum) * * Ratings are stated without LVD’s fitted. In some subject to change without notice.
cases lower ratings may result when LVDs are
used. Refer to installation guide for detailed load
specs and MCB de-rating factors.

Environmental
Operating -40°C to +70°C [-40°F to +158°F]
Temperature Output current is derated above 40°C [104°F] and
Range below -10°C [14°F]

Mechanical
Dimensions 9U, 19” mounting, 335mm [12.4”]*
H,W,D
* Additional clear space is required for exhaust air.

System
System SC200 or SC100
Controller
DC Distribution 20-way circuit breakers (4 x Battery, 16 x Load)
Module
Communication USB direct*
Features 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-
TCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem
not included)
*SC200 only
Low Voltage Optional battery LVD, or non priority LVD, or battery
Disconnect and non priority LVD’s. (Contactors 400A
(LVD) rated)
Rectifier Blank For unused rectifier positions
Panels
Options External Surge Protection

† Power factor, efficiency, AC voltage range and output power is

dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.

Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
Email: dc.info@eaton.com © 2012 Eaton Corporation All Rights
Internet: www.dcpower.eaton.com Reserved APS12-300 H