MD5075
MD5075
MD5075
Track Drill
General Data
Hole Diameter Range 76.2 mm-127 mm 3.0 in-5.0 in
Hole Depth Maximum 31 m 102.5 ft
Engine C9 Tier 3 224 kW (300 hp) at 1,800 rpm
Compressor 9.9 m3/min 350 ft3/min
Rock Drill HPR4519 19 kW 25 hp
MD5075 Features
Pattern Coverage
With a heavy-duty 3.81 m (12.5 ft) boom and
1.5 m (5 ft) extension, exceptional pattern
coverage is achieved.
Rock Drill
World-class Cat ® Rock Drills offer the fewest
internal parts in the industry. Simple enough to
be owner serviced yet renowned for their strength
and long life in hard rock drilling.
Power Group
Fast cycle times are achieved through substantial
horsepower, air capacity, and time-saving systems
that enhance efficiency.
Contents
Pattern Coverage ................................................4
Undercarriage ...................................................11
Cab.......................................................................12
Safety ..................................................................15
Serviceability .....................................................16
Sustainability .....................................................18
Specifications ....................................................19
2
Equipped To Go Further
Hard-working, Dependable, Easily Maintained
The Cat MD5075 achieves large pattern coverage with a sturdy extendable boom and
reduces your cycle time with an efficient carousel rod changer. Its powerful rock drill,
durable Cat components, and ease of maintenance contribute to the exceptional
value of this proven machine.
3
Pattern Coverage
Far Reaching
21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 ft
6.4 6.09 5.79 5.48 5.18 4.87 4.57 4.26 3.96 3.65 3.35 3.04 2.74 2.43 2.13 1.82 1.52 1.21 0.91 0.6 0.3 0 m
ft m
6 1.82
5 1.52
4 1.21
3 0.91
2 0.6
1 0.3
0 0
4
Boom and Feed
Reach Further
A Sturdy boom and feed support the carousel rod changer providing excellent pattern coverage and fewer required setups.
The heavy-duty boom is constructed of thick square tubing with steel plate reinforcements in key areas to add strength.
Built with high strength steel channels with diagonal internal bracing, the feed system resists torsion and thrust loads.
• Boom length 3.81 m (12.5 ft)
• Boom extension adds 1.5 m (5 ft)
• Boom swing capability is 51° L to 15° R
• Boom angle capability is 38° lift angle to 27° below horizontal angle
• Feed table is 2.7 m (9 ft) with a 0.9 m (3 ft) extension
• Planetary gearbox feed drive is capable of 3347 kg (7,379 lb) feed force and 27.7 m/min (91 ft/min) speed
• Lighting on the feed illuminates the carousel and hole site for around the clock drilling
• Adjustable wear pads
5
Reliable Performer
Low cost of ownership and reliability are yours with renowned Cat Rock Drills. Building on a legacy of simplistic power,
these drills have long life expectancy and are field serviceable.
This combination of sturdy design and easy maintenance means more hours of reliable, low-cost operation. For added efficiency,
the pistons are matched to the cross section of the rod so the wave form is properly matched for maximum energy transfer.
Durable Design
A simple design coupled with high strength materials yields exceptional durability.
• Having only half of the components of competitive models, there are fewer internal parts to wear
• There are four major housings bolted together with high strength flanges eliminating troublesome long tie rods
• Long life alloy bushings
• Fast response accumulators provide a smooth and efficient hydraulic oscillation
• Long leakage paths of the oscillator bearings yield high volumetric efficiency
Owner Serviceable
• Cat Rock Drills are so simple that owner serviceability is a viable alternative and cost savings
• Other models require downtime for round trip transportation to a clean room environment
• Only their OEM service technicians can perform the maintenance and repairs
• All maintenance and rebuilds can be done in your shop and some maintenance can even be done with the rock drill
still mounted to the feed
• Accumulator assemblies may be replaced in the field
• Troubleshooting is easy since there are half the components of other drills
Standard on the MD5075 is the HPR4519 hydraulic powered percussion rock drill rated at 19 kW (25 hp)
output energy with dual hydraulic variable rotation motors producing 908 N∙m (670 lbf-ft) torque.
6
Rock Drills
Strong Achievers –
Lower Your Cost of Ownership
7
Carousel Rod Changer
Improve Your Productivity
Additional Features
• Drill steel diameter 45 mm
• Drill steel lengths 3.66 m or 4.27 m (12 ft or 14 ft) with a 6.1 m (20 ft)
starter rod
• Six rod carousel
• Deep multi-pass hole depth to 31.1 m (102.5 ft)
• Unique gate design always keeps a rod in position; ready to load
• Multiple functions are run simultaneously to save process time
• Heavy-duty, dual rod grippers assist with rod changes and are
designed to last
• Precise positioning function indexes and locks, eliminating the
need for troublesome switches and sensors that are failure prone
due to the elements and vibration
• Corrosion resistant and self-lubricating pivot points eliminate
manual lubrication
9
Power Group
Delivers Efficiency
Engine
Powered by a six (6) cylinder Cat C9 Tier 3 engine that is
electronically controlled, turbocharged, and air-to-air
after cooled producing 224 kW (300 hp) @ 1,800 rpm.
Fuel conservation, and the resulting lower operating cost,
is achieved with three-speed engine throttle control.
Hydraulics
Compressor
Cooler Simple and efficient
Abundant air provides excellent
Coolers for engine, hydraulic, • Piston pump runs all functions in either
flushing power
compressor systems mode – pressure compensated in drill
• Reliable rotary screw-type
• 52° C (125° F) ambient temperature mode and load sensing in tram mode
compressor
• MD5075 cooler is equipped with • In tram mode the compressor runs
• High pressure rating 163 L/sec
ATAAC side by side arrangement at minimum pressure valve setting
(350 ft3/min) @ 10.2 bar (150 psi)
• Easy troubleshooting and • Large hydraulic tank with greater cooling
• Dual-element air filters with
cleaning of coils capacity for longer intervals between
indicators
circulation of oil (405 L or 107 gal)
10
Undercarriage
Maximize Your Maneuverability
11
The pressurized Cat cab is a quiet and safe work environment with sound
levels less than 80 dB(A). To minimize vibration, the MD5075 cab is isolator
mounted while ergonomic responsive controls reduce your operator’s fatigue.
Safety features include numerous shut down methods and a front window
with push-out egress, providing a second exit in case of emergency.
Features
• Climate control system maintains a consistent temperature
• Air is filtered to the operator
• Defrost/defog air is supplied to windows
• Operators seat is adjustable six ways
• Armrests, controls and switches are ergonomic
• Easy access to cab air filter
• AM/FM Radio IPOD/MP3 player ready
• Communications radio ready
• Easy to clean finishes
• External 12V plug
12
Cab
Safe and Sound
13
Dust Collection
The Cat HDE 900 Dust Collector is a highly capable dry dust collection system. Powered to clear holes up to 12.7 cm (5 in),
the heavy duty system effectively manages rock fragments and dust. It is also easy to clean and service which adds to your uptime
and overall productivity.
Features
• Swing out design for interior access
• The sealed pick up pot prevents cuttings from escaping above the hole
• Abrasive resistant dust hose is 127 mm (5 in) in diameter
• Timed cleaning is continual through reverse-pulses of air
• Vacuum generated air flow carries the materials
• Pivoting separator is feed mounted and separates cuttings from dust
• Filtration area is 28 m2 (304 ft 2) and separates the solid particles from the clean air
• Mounted within the slim profile of the machine
• Optional water injection system can be used to suppress dust and hole-collaring or mudding the top hole to create a natural seal
• The suction fan design limits the power requirement to correspond with the application
• Easy bottom access to filters and air valves
14
Safety
Protect Your Investments
Safety Features
• Emergency stop in the cab and on the feed
• Ground-level access to service points and well-organized
electrical and hydraulic designs so no step ladder required
• Spring applied, hydraulically released brakes
• Non-slip, heavy duty steps and handles are strategically placed
• Three points of contact at all steps
• Feed mounted swipe string
15
Serviceability
Smart and Simple
16
Serviceability
With the maintenance friendly designs, service access is safe and efficient.
Cat Track Drills have well-organized electrical and hydraulic arrangements.
Logically located components contribute to its simplicity and ease of maintenance.
The combined result is longer equipment life cycle, lower operating costs,
and higher re-sale value for you.
Features
• Well organized electrical and hydraulic designs
• Color coded valves and blocks for easy identification and troubleshooting
• Point to point wiring reduces mean time to repair
• Bulk head fitting to allow for shorter run hoses
• Hydraulic hoses labeled by diameter and length and spaced for easy
wrench access
• Manual valve bank for operating in the event of an electrical loss also helps
isolate issues with electronics or hydraulics
• Portable interior halogen light for underneath the canopy
• Two exterior rear facing lights
• Enclosure has doors lifted with gas springs
• The canopy can be completely removed via four pinning points and lifting lugs
• Pump for filling hydraulic tank
• Service areas are designed with three points of contact for safety
• The grease reservoir is easily accessible for changing coupling grease
17
Sustainability
Tomorrow’s World
18
MD5075 Track Drill Specifications
Gradeability 35°
ROPS/FOPS certified
Ground clearance 380 mm 15 in
Digital engine and drill readout system
Ground pressure 0.82 bar 12 psi
Joysticks in both armrests
Track gauge 204 cm 80 in
Noise rating less than 80 dB(A)
Tram maximum speed 4 km/h 2.5 mph
Total glass 3.07 m2 33 ft 2
Track oscillation ± 10°
Six way adjustable seat; forward/back, up/down and reclining
Power Train
Smart Drill Drilling System from MD5150C
Cat C9 Tier 3, six (6) cylinder, 224 kW @ 300 hp @
electronically controlled, water-cooled, 1,800 rpm 1,800 rpm Operator-selected, smooth, electrical control system
turbocharged and air-to-air after- for all drilling functions
cooled diesel engine Monitors main hydraulic system (hammer, feed, air and rotation
Dual element air filter pressure) and automatically adjusts to pre-programmed parameters
Fuel tank – dual fill 492 L 130 gal Minimizes overfeeding
Anti-plug
Anti-plunge
Anti-jam
19
MD5075 Track Drill Specifications
Boom length 3.81 m 12.5 ft HPR4519 hydraulic powered percussion rock drill
Boom extension 1.5 m 5 ft Output energy @ 240 rpm 19 kW 25 hp
Boom swing 51° L to 15° R Dual hydraulic variable rotation motors producing
Boom lift above horizontal 38° 908 N∙m (670 lbf-ft) torque
Boom dump below horizontal 27° Weight 299 kg 660 lb
Rod diameter 45 mm
Carousel Rod Changer System Percussion pressure Up to Up to
200 bar 2,900 psi
3.66 m (12 ft) Rod Changer
Blow rate 2500
45 mm – 6 Rod +1 or 51 mm – 6 Rod +1
2700 bpm
Total hole depth 27.4 m (90 ft) with 6.1 m (20 ft) starter steel
Rock drill auto lube system option
4.27 m (14 ft) Rod Changer
Optional HPR5123 Rock Drill
45 mm – 6 Rod +1 or 51 mm – 6 Rod +1
Output energy @ 160 rpm 23 kW 31 hp
Total hole depth 31 m (102 ft) with 6.1 m (20 ft) starter steel
Dual hydraulic variable rotation motors producing
1356 N∙m (1,000 ft-lb)
Weight 397 kg 877 lb
Rod diameter choices 45 or 51 mm
Percussion pressure Up to Up to
200 bar 2,900 psi
Blow rate 2500
2700 bpm
20
MD5075 Track Drill Specifications
Dimensions
2 3
21
MD5075 Track Drill Specifications
ft m
6 1.82
5 1.52
4 1.21
3 0.91
2 0.6
1 0.3
0 0
1 0.3
2 0.6
3 0.91
4 1.21
5 1.52
6 1.82
7 2.13
8 2.43
9 2.74
10 3.04
11 3.35
12 3.65
13 3.96
14 4.26
15 4.57
6.4 6.09 5.79 5.48 5.18 4.87 4.57 4.26 3.96 3.65 3.35 3.04 2.74 2.43 2.13 1.82 1.52 1.21 0.91 0.6 0.3 0 m
21 20
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 ft
24°
67°
37° 36°
Drill Angle, Feed Drill Angle, Toe-Hole
22
MD5075 Standard and Optional Equipment
Standard Equipment
Standard equipment may vary. Consult your Cat dealer for details.
Optional Equipment
Optional equipment may vary. Consult your Cat dealer for details.
• HPR5123 Rock Drill in lieu of HPR4519 • Auto lube for rock drill • Carousel rod changer designed for 3.66 m
• Rod changer conversion kit • Arctic oil (12 ft) drill steel. Carousel will hold 6 rods.
• CE kit • Rear-mounted water injection system
• Single bar grousers utilizing a 303 L (80 gal) pressurized tank
23
For more complete information on Cat products, dealer services, AEHQ6926-01 (12-2014)
and industry solutions, visit us on the web at www.cat.com Replaces AEHQ6926
© 2014 Caterpillar
All rights reserved