Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 228 views

    Amendment No. 4 November 2020 TO Is 2347: 2017 Domestic Pressure Cooker - Specification

    Uploaded by

    narendar.1
    This amendment provides 3 additions to IS 2347:2017 regarding domestic pressure cookers with 3-ply construction bodies: 1. It specifies the material requirements for a 3-ply cooker body - stainless steel inner and outer layers with an aluminum middle layer. 2. It adds a new clause requiring 3-ply cooker bodies to withstand 50 heating and cooling cycles without delamination or blistering. 3. It inserts a new annex with a test method for the adhesion of 3-ply cooker bodies, involving heating to 250°C and quenching in water 50 times.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Amendment No. 4 November 2020 TO Is 2347: 2017 Domestic Pressure Cooker - Specification

    Uploaded by

    narendar.1
    228 views2 pages
    This amendment provides 3 additions to IS 2347:2017 regarding domestic pressure cookers with 3-ply construction bodies: 1. It specifies the material requirements for a 3-ply cooker body - stainless steel inner and outer layers with an aluminum middle layer. 2. It adds a new clause requiring 3-ply cooker bodies to withstand 50 heating and cooling cycles without delamination or blistering. 3. It inserts a new annex with a test method for the adhesion of 3-ply cooker bodies, involving heating to 250°C and quenching in water 50 times.

    Original Title

    2347A4

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This amendment provides 3 additions to IS 2347:2017 regarding domestic pressure cookers with 3-ply construction bodies: 1. It specifies the material requirements for a 3-ply cooker body - stainless steel inner and outer layers with an aluminum middle layer. 2. It adds a new clause requiring 3-ply cooker bodies to withstand 50 heating and cooling cycles without delamination or blistering. 3. It inserts a new annex with a test method for the adhesion of 3-ply cooker bodies, involving heating to 250°C and quenching in water 50 times.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    228 views2 pages

    Amendment No. 4 November 2020 TO Is 2347: 2017 Domestic Pressure Cooker - Specification

    Uploaded by

    narendar.1
    This amendment provides 3 additions to IS 2347:2017 regarding domestic pressure cookers with 3-ply construction bodies: 1. It specifies the material requirements for a 3-ply cooker body - stainless steel inner and outer layers with an aluminum middle layer. 2. It adds a new clause requiring 3-ply cooker bodies to withstand 50 heating and cooling cycles without delamination or blistering. 3. It inserts a new annex with a test method for the adhesion of 3-ply cooker bodies, involving heating to 250°C and quenching in water 50 times.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    AMENDMENT NO.

    4 NOVEMBER 2020

    Free amendment provided by BIS via BSB Edge Private Limited to bengaluru(narendar.1@gmail.com) 122.50.219.73
    TO

    IS 2347 : 2017 DOMESTIC PRESSURE COOKER —


    SPECIFICATION
    ( Sixth Revision )

    (Page 1, clause 5.1.4) — Insert the following new sub clause:

    ‘5.1.5 If the Body of the pressure cooker is made of a 3-ply construction, 3-ply
    material shall be made with inner layer – designation X04Cr19Ni9 (grade 304)
    of IS 5522, middle layer – aluminium as per IS 21 and outer layer – designation
    X07Cr17 (grade 430) of IS 6911.

    NOTE — Only chemical composition of stainless steel and aluminium needs to be complied
    with.’

    [Page 4, clause 8.13 (see also Amendment No. 3)] — Insert the following
    new clause:

    ‘8.14 For 3 ply construction cooker body, the body shall be tested as per Annex S.
    The body shall not show any separation (or delamination) of the 3-ply or shall not
    show blisters, after the completion of 50 cycles.’

    [Page 13, annex Q (see also Amendment No. 2)] — Insert the following new
    annex:

    ‘ANNEX S
    ( Clause 8.14 )

    TEST FOR ADHESION OF 3 PLY CONSTRUCTION COOKER BODY

    S-1 Heat the pressure cooker body to 250°C (+25 °C /-0 °C) and quench in water
    at ambient temperature. Before quenching, the cooker body shall be checked at

    1
    a minimum of two locations to confirm, that the temperature of the cooker body
    has attained 250°C (+25 °C /-0 °C) . Temperature to be measured at inside bottom
    and top edge (mouth portion) of the cooker (record the temperature for atleast the

    Free amendment provided by BIS via BSB Edge Private Limited to bengaluru(narendar.1@gmail.com) 122.50.219.73
    first and the last cycle). Repeat this cycle 50 times.
    NOTES:
    1 Hold (soak) the cooker body for 2 min at 250°C (+25/-0) under heating condition, before
    measuring and subsequent quenching in ambient temperature water.
    2 For guidance purpose, heating source may be hot air oven or any other equipment which can
    be used to achieve such temperature.’

    (MED 33)
    Publication Unit, BIS, New Delhi, India
    2

    You might also like