MATERIAL SAFETY DATA SHEET

MSDS Name: THINNER

MSDS Number: LAB SOLVENT
Version Number
MSDS Date: NOV-13-2009
Page Number: 1 of 6
--------------------------------------------------------------------------------

================================================================================
SECTION 1. PRODUCT AND COMPANY INFORMATION
--------------------------------------------------------------------------------
Product Name: THINNER
CAS Number N/A
Hazard Rating: Health: 2 Fire: 3 Reactivity: 0 PPI:

Company Identification: DAMPNEY CO INC.

85 PARIS ST
EVERETT MA 02149-4411

Contact: CONRAD FOO

Telephone/Fax: (617) 389-2805 (617) 389-0484
Chemtrec (24 Hour): (800) 424-9300

Product Class SOLVENT

Trade Name THINNER
Product Code LAB SOLVENT

================================================================================
SECTION 2. INGREDIENT AND HAZARD INFORMATION
--------------------------------------------------------------------------------
Ingredient Name CAS Number Percent TSCA

TOLUENE (HAPS) 108-88-3 52.35 Y

ACETONE 67-64-1 47.65 Y

*** ALL Ingredients in this product are listed in the T.S.C.A. Inventory

** SPECIAL REMARKS ON ABOVE LISTED INGREDIENTS **

ACGIH recommends a TWA of 50 ppm for toluene (skin).

================================================================================
SECTION 3. PHYSICAL DATA
--------------------------------------------------------------------------------
Form: LIQUID
Appearance/Color: CLEAR
Odor: AROMATIC
pH Value: Not Applicable

--------------------------------------------------------------------------------
 MATERIAL SAFETY DATA SHEET

MSDS Name: THINNER

MSDS Number: LAB SOLVENT
Version Number
MSDS Date: NOV-13-2009
Page Number: 2 of 6
--------------------------------------------------------------------------------

Boiling Range: 133.°F - 232.°F

Melting Point: Not Applicable
Evaporation Rate: 7.909 times Faster than n-Butyl Acetate

Vapor Density: Heavier than air

Partition Coefficient Not Available

% Volatile Weight 100.%
% Volatile 100.%
Specific Gravity: 0.829
Weight/Gallon: 6.90 lbs
VOC 7.23 LBS/GAL
Heavy Elements (ppm) 0.

================================================================================
SECTION 4. FIRE AND EXPLOSION HAZARD DATA
--------------------------------------------------------------------------------
Flammability Class 1C
Flash Range: -4.°F - 48.°F

Explosive Range: 1.4%

12.8%

EXTINGUISHING MEDIA:
Foam, alcohol foam, CO2, dry chemical, water fog may be ineffective
but should be used to cool fire-exposed containers to prevent
pressure build up and possible auto-ignition or explosion when
exposed to extreme heat.
SPECIAL FIREFIGHTING PROCEDURES:
Use full protection equipment including self contained breathing
apparatus(NIOSH approved) for respiratory protection in fighting
fires in enclosed or confined spaces, or as otherwise needed.
Minimize breathing gases, vapors, fumes or decomposition products.
UNUSUAL FIRE & EXPLOSION HAZARDS:
During emergency conditions, overexposure to decomposition
products may cause a health hazard. Symptoms may not be
immediately apparent. Obtain medical attention.

================================================================================
SECTION 5. HEALTH HAZARD DATA
--------------------------------------------------------------------------------
Route Species Exposure and Dose

--------------------------------------------------------------------------------
 MATERIAL SAFETY DATA SHEET

MSDS Name: THINNER

MSDS Number: LAB SOLVENT
Version Number
MSDS Date: NOV-13-2009
Page Number: 3 of 6
--------------------------------------------------------------------------------

TOLUENE (HAPS)
Inhalation Unknown LD50 8000. PPM
Oral Unknown LD50 5. PPM
Skin Unknown LD50 14. PPM

PERMISSIBLE EXPOSURE LEVEL:

SEE SECTION VIII
EFFECTS OF OVEREXPOSURE:
Primary route(s) of entry:
(X) Dermal (X) Inhalation ( ) Ingestion
Acute (short term) exposure:
Inhalation - excessive inhalation of vapors can cause nasal
and respiratory irritation, cns effects including
dizziness, weakness, nausea, headache, possible
unconsciousness, and even death.
Skin contact - prolonged or repeated contact can cause
moderate irritation, defatting, and dermatitis.
Eye contact - can cause severe irritation, redness, tearing,
and blurred vision.
Ingestion - can cause gastrointestinal irritation, nausea,
vomiting, and diarrhea. Aspiration of material into
the lungs can cause chemical pneumonitis which can be
fatal.
EMERGENCY AND FIRST AID PROCEDURES:
Eyes - flush thoroughly with running water for 15 minutes,
including under eyelids. Get medical attention.
Skin - promptly remove contaminated clothing and wash affected
areas thoroughly with soap and water. If irritation occurs
get medical attention. Wash contaminated clothing
thoroughly before re-use.
Inhalation - if overcome by vapor, remove to an area free from
risk of further exposure. If breathing is difficult,
administer oxygen, or artificial respiration if breathing
has stopped. Keep person warm and quiet and get medical
attention.
Ingestion - if swallowed, call a physician immediately. Only
induce vomiting at the instructions of a physician. Never
give anything by mouth to an unconscious person. Intentional
misuse by deliberately concentrating and inhaling the
contents may be harmful or fatal.
MEDICAL CONDITIONS PRONE TO AGGRAVATION BY EXPOSURE:
Pre-existing eye, skin, liver and/or kidney disorders may be
aggravated by exposure to this product.

--------------------------------------------------------------------------------
 MATERIAL SAFETY DATA SHEET

MSDS Name: THINNER

MSDS Number: LAB SOLVENT
Version Number
MSDS Date: NOV-13-2009
Page Number: 4 of 6
--------------------------------------------------------------------------------

Chronic (long term) exposure:

In laboratory animals - overexposure to this material (or
its components) has been found to cause the following
effects; anemia, liver abnormalities, kidney, lung and
spleen damage.
In humans - liver and cardiac abnormalities.
Toluene may be harmful to the fetus based on laboratory animal
studies. Repeated exposure to toluene has been associated with
high frequency hearing loss based on evidence in laboratory
animals. The human health consequences of this finding is
uncertain.

================================================================================
SECTION 6. STABILITY AND REACTIVITY MEASURES
--------------------------------------------------------------------------------
Stability: This product is stable
Hazardous Polymerization: Hazardous polymerization will not occur

INCOMPATIBILITY:
Avoid contact with strong oxidizing agents, acids or bases.
CONDITIONS TO AVOID:
Avoid heat, open flames.
HAZARDOUS DECOMPOSITION PRODUCTS:
Carbon monoxide and unidentified organics may be formed.

================================================================================
SECTION 7. SPILL OR LEAK PROCEDURES
--------------------------------------------------------------------------------

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:

Before attempting cleanup, refer to hazard caution information in
other sections of this sheet. Persons not wearing protective
equipment should be excluded from area of spill until clean-up
has been completed.
Large spills - notify safety personnel. Eliminate potential
sources of ignition. Wear appropriate respirator and protective
clothing. Soak up with an absorbent, I.E. sand, clay, or other
suitable material. Place in non-leaking containers and seal
tightly for proper disposal. Ventilate confined spaces.
Minimize breathing vapors. Open all windows and doors. Minimize
skin contact. Keep product out of sewers and water courses by
diking and impounding. Observer precautions for volatile,
combustible vapors from absorbed material.

--------------------------------------------------------------------------------
 MATERIAL SAFETY DATA SHEET

MSDS Name: THINNER

MSDS Number: LAB SOLVENT
Version Number
MSDS Date: NOV-13-2009
Page Number: 5 of 6
--------------------------------------------------------------------------------

Small spills - take up with absorbent material and place in

non-leaking containers for proper disposal.
WASTE DISPOSAL METHOD:
Assure conformity with applicable federal, state and local
regulations.

================================================================================
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
--------------------------------------------------------------------------------
Occupational Exposure Limits
ACGIH TLV ACGIH TLV-C ACGIH STEL OSHA STEL OSHA PEL

TOLUENE (HAPS)
50.00 PPM N/est 100.00 PPM 100.00 PPM 100.00 PPM

ACETONE
750.00 PPM N/est 1000.00 PPM 1000.00 PPM 750.00 PPM

RESPIRATORY PROTECTION:
Use NIOSH approved respirator as required to prevent
overexposure.
Unconfined spaces - use a vapor/particulate respirator such as
NIOSH approved No. TC-23C.
Confined spaces - use a constant flow air-line respirator such as
NIOSH approved NO. TC-19C.
VENTILATION:
Provide sufficient ventilation to keep air contaminant
concentration below current applicable OSHA permissible exposure
limit or ACGIH's TLV limit.
No smoking or open lights.
PROTECTIVE GLOVES:
Use chemical-resistant gloves to prevent skin contact.
EYE PROTECTION:
Use chemical splash goggles or face shield to prevent eye
contact.
OTHER PROTECTIVE EQUIPMENT:
Use chemical-resistant or other protective outerwear to protect
against clothing contamination and skin contact.

================================================================================
SECTION 9. SPECIAL PRECAUTIONS
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
 MATERIAL SAFETY DATA SHEET

MSDS Name: THINNER

MSDS Number: LAB SOLVENT
Version Number
MSDS Date: NOV-13-2009
Page Number: 6 of 6
--------------------------------------------------------------------------------

PRECAUTIONS TO BE TAKEN IN HANDLING,TRANSPORTATION,AND STORING:

CAUTION! FLAMMABLE! Handling and storage conditions must be
suitable for OSHA CLASS I flammable liquid. Store in cool,
well-ventilated, fire resistant storage area. Protect containers
against physical damage. Keep away from heat, flame, and strong
oxidizing agents. Do not store above 100 degrees F. Use only
with adequate ventilation. Keep containers closed when not in
use. Do not breathe vapor or mist. Avoid contact with eyes,
skin and clothing. Do not take internally. Bond and ground
containers of this material when pouring to avoid static sparks
which create a fire hazard.
OTHER PRECAUTIONS:
Contact lenses pose a special hazard; soft lenses may absorb and
all lenses concentrate irritants.

================================================================================
SECTION 10. REGULATORY INFORMATION
--------------------------------------------------------------------------------
SARA TITLE III SECTION 313:
This product contains the following toxic chemicals subject to
the reporting requirements of Section 313 of the Emergency
Planning and Community Right to Know Act of 1986 and of 40 CFR
372:
Ingredient Name CAS Number Percent

TOLUENE (HAPS) 108-88-3 52.35

-PROP 65 (CARCINOGEN)
WARNING: this product contains a chemical known to the state of
California to cause cancer.
Ingredient Name CAS Number Percent

ACETONE 67-64-1 47.65

-PROP 65 (BOTH CARCINOGEN AND TERATOGEN)

WARNING: This product may contain a chemical known to the state
of California to cause cancer and birth defects, or other
reproductive harm.
Ingredient Name CAS Number Percent

TOLUENE (HAPS) 108-88-3 52.35

--------------------------------------------------------------------------------
 MATERIAL SAFETY DATA SHEET

MSDS Name: THINNER

MSDS Number: LAB SOLVENT
Version Number
MSDS Date: NOV-13-2009
Page Number: 7 of 6
--------------------------------------------------------------------------------

=================================================================
The information and recommendations contained herein are based on
data believed to be correct. However, Dampney makes no warranty
express or implied regarding the accuracy of these data or
results to be obtained from the use thereof. Dampney assumes no
responsibility for personal injury or property damaged caused by
use of the material described herein. It is the responsibility of
the purchaser or user to ensure that this material is properly
and safely used.

--------------------------------------------------------------------------------

Last Page