AOC4518R19v06

D08X-2x690-960/2x1427-2690/4x1695-2690-8x65-2x16.5i/2x17i/4x17.5i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m

Antenna Specifications

Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable, each band separately
at mid Tilt 15.6 15.9 16.1 16.3
Gain (dBi)
over all Tilts 15.5 ±0.5 15.8 ±0.5 16.0 ±0.5 16.1 ±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3dB beam width (°) 70 ±7 67 ±6 65 ±6 62 ±6
Vertical 3dB beam width (°) 8.8 ±0.8 8.1 ±0.6 7.8 ±0.5 7.3 ±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 27
Front to back ratio , ±30° (dB) > 21 > 22 > 22 > 22
Cross polar ratio (dB) 0° > 18 > 18 > 18 > 18
Max. effective power per port (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

Electrical Properties
2 x (1427 - 2690) (LTy3/RTy5)
Frequency range (MHz)
1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable, each band separately
at mid Tilt 15.5 16.7 17.1 17.3 17.5
Gain (dBi)
over all Tilts 15.4 ±0.6 16.6 ±0.5 17.0 ±0.5 17.2 ±0.5 17.4 ±0.5
Side lobe suppression for first side
> 15 > 15 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3dB beam width (°) 70 ±7 66 ±6 65 ±6 64 ±6 58 ±6
Vertical 3dB beam width (°) 8.9 ±0.6 7.2 ±0.6 6.5 ±0.6 5.7 ±0.4 5.2 ±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 27 ≥ 27
Front to back ratio , ±30° (dB) > 23 > 25 > 25 > 25 > 25
Cross polar ratio (dB) 0° > 16 > 17 > 17 > 17 > 16
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

1
 AOC4518R19v06
D08X-2x690-960/2x1427-2690/4x1695-2690-8x65-2x16.5i/2x17i/4x17.5i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m

Electrical Properties
2 x (1695 - 2690) (CLBy2/CRBy4) 2 x (1695 - 2690) (LBy1/RBy6)
Frequency range (MHz)
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
2 - 12 , continuously adjustable, each band 2 - 12 , continuously adjustable, each band
Electrical downtilt (°)
separately separately
at mid Tilt 16.9 17.3 17.5 17.7 16.8 17.2 17.5 17.7
Gain (dBi)
over all Tilts 16.8 ±0.5 17.2 ±0.5 17.4 ±0.5 17.6 ±0.5 16.7 ±0.5 17.1 ±0.5 17.4 ±0.5 17.6 ±0.5
Side lobe suppression for first
> 16 > 16 > 16 > 15 > 15 > 16 > 16 > 15
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 69 ±6 66 ±6 60 ±6 58 ±6 70 ±7 67 ±6 64 ±6 58 ±6
Vertical 3dB beam width (°) 7.1 ±0.6 6.4 ±0.6 5.7 ±0.4 5.2 ±0.4 7.1 ±0.6 6.4 ±0.5 5.7 ±0.4 5.2 ±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 27 ≥ 27
Front to back ratio , ±30° (dB) > 25 > 25 > 25 > 25 > 24 > 25 > 25 > 24
Cross polar ratio (dB) 0° > 17 > 17 > 17 > 16 > 17 > 17 > 17 > 16
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2769 x 469 x 206

(809)
Packing dimensions (H x W x D) (mm) 2980 x 555 x 255
Antenna weight (kg) 46.5
Clamps weight (kg) 6.3 (2 units)
Antenna packing weight (kg) 64 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material GFRPP*
Radome colour Light grey
Operational temperature (℃) -40 .. +65
2769
1885

Frontal: 860 (at 150 km/h)

Wind load (N) Lateral: 535 (at 150 km/h)
Maximum: 1140 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 16 x 4.3-10 Female
Connector position Bottom

*GFRPP: Glass Fiber Reinforced Polypropylene

75

Accessories
Unit: mm
Item Model Description Weight Units per antenna
Downtilt kit ASMDT0H01 Mechanical downtilt: 0 - 8 ° 3.1 kg 1 (Separate packing)

2
AOC4518R19v06
D08X-2x690-960/2x1427-2690/4x1695-2690-8x65-2x16.5i/2x17i/4x17.5i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m

Pattern sample for reference

690 - 960 MHz 1695 - 2690 MHz

(Lr1/Rr2) (LBy1/RBy6)

1427 - 2690 MHz 1695 - 2690 MHz

(LTy3/RTy5) (CLBy2/CRBy4)

3
 AOC4518R19v06
D08X-2x690-960/2x1427-2690/4x1695-2690-8x65-2x16.5i/2x17i/4x17.5i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m

Antenna Information Management Module (AIMM) Specifications

Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol
switching function, contact Huawei before system installation.

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

c d e a HWxxxx……….Lr1
b HWxxxx…….LBy1
b f c HWxxxx….CLBy2
y3 y5
d HWxxxx…….LTy3
h
e HWxxxx….CRBy4

g f HWxxxx…….RBy6
a g HWxxxx……….Rr2 y1 y2 y4 y6
r1 r2
h HWxxxx…….RTy5

r - Red y – Yellow T- Top array B - Bottom array

L - Left array C - Center array R - Right array

NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements
described in the antenna installation guide.
5. In the effort to improve our products, all specifications are subject to change without notice.

Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna

4 Issue: 2020-11-20