Unit Cost of Labor & Materials

Item Material
Item Description Unit
No. Unit Cost
1.00 Earthworks
1.01 Clearing and Grubbing sq.m -
1.02 Structural Excavation cu.m -
1.03 Backfilling and Compaction cu.m -
1.04 Gravel Bedding G-1 cu.m 550.00
1.05 Soil Poisoning sq.m 15.00
1.06 Select Fill cu.m 150.00
2.00 Concreting Works -
2.01 Portland Cement bag 225.00
2.02 Crushed Gravel 3/4" cu.m 550.00
2.03 Washed Sand cu.m 350.00
2.04 Demolition of reinforced concrete cu.m -
2.05 Crushed Gravel 1" cu.m 550.00
3.00 Rebar Works -
3.01 Deformed Round Bars, Grade 40 kg 41.50
3.02 G.I. Tie Wire kg 50.00
3.03 G.I. Tie Wire roll 1,750.00
4.00 Formworks -
4.01 Coco Lumber bd.ft 13.00
4.02 Plywood Ordinary, 1/4" x 4' x 8' pc 350.00
4.03 Plywood Ordinary, 1/2" x 4' x 8' pc 546.22
4.04 CWN, Assorted kg 60.00
5.00 Masonry Works -
5.01 Demolition of Masonry Wall sq.m -
5.02 Portland Cement bag 225.00
5.03 Washed Sand cu.m 350.00
5.04 CHB 4" thk pc 7.00
5.05 CHB 6" thk pc 8.00
5.06 10mm x 6m RSB kg 41.50
5.07 G.I. Tie Wire kg 50.00
5.08 Concrete Louver Blocks pc 30.00
5.09 Plaster Moulding lm 125.00
6.00 Doors and Windows -
6.01 Removal of Door with Jamb set -
6.02 Removal of Window with Jamb sq.m -
6.03 D-1, Panel Door 0.90m x 2.10m on 150mm Wooden Jamb complete with Accessories set 5,757.50
6.04 D-2 Flush Door 0.90m x 2.10m on 150mm Wooden Jamb complete with Accessories set 3,767.50
6.05 D-3 Flush Door 0.70m x 2.10m on 150mm Wooden Jamb complete with Accessories set 3,407.50
6.06 D-4 Cubicle Door 0.60m x 1.20m on 150mm Wooden Jamb complete with Accessories set 2,878.75
W - 1, ( 2.6 x 1.6 m) Jalousie Window with Clear Glass Blades on Standard Aluminum
6.07 Casing and Fixed Clear Glass Transom on 50 x 150 mm Wooden Jamb complete with set 6,700.00
W - 2, ( 1.5 x 1.6 m) Jalousie Window with Clear Glass Blades on Standard Aluminum
Accessories
6.08 Casing and Fixed Clear Glass Transom on 50 x 150 mm Wooden Jamb complete with set 3,800.00
W - 3, ( 0.7 x 2.6 m) Jalousie Window with Clear Glass Blades on Standard Aluminum
Accessories
6.09 Casing and Fixed Clear Glass Transom on 50 x 150 mm Wooden Jamb complete with set 3,500.00
Accessories
6.10 Panel Door 0.90m x 2.10m pc 4,398.23
6.11 Panel Door 0.80m x 2.10m pc 3,340.00
6.12 Panel Door 0.70m x 2.10m pc 3,000.00
6.13 Panel Door 0.60m x 2.10m pc 3,000.00
6.14 Flush Door 0.90m x 2.10m pc 1,856.00
6.15 Flush Door 0.80m x 2.10m pc 1,540.00
6.16 Flush Door 0.70m x 2.10m pc 1,240.00
6.17 Flush Door 0.60m x 2.10m pc 1,200.00
6.18 Steel Door 0.70m x 2.10m pc 4,375.00
6.19 Steel Door 0.80m x 2.10m pc 4,500.00
6.20 Steel Door 0.90m x 2.10m pc 4,600.00
6.21 PVC Door 0.60m x 2.10m pc 1,550.00
6.22 Door Jamb 45mm x 100mm set 1,050.00
6.23 Door Jamb 45mm x 125mm set 1,450.00
6.24 Door Jamb 45mm x 150mm set 1,550.00
6.25 Steel Encased Clear Glass Window with Grilles sq.ft 125.00
6.26 Security Grilles sq.ft 90.00
6.27 Entrance, Lockset Standard set 467.50
6.28 Entrance, Handleset set 7,760.00
6.29 Entrance, Cylindrical Lockset set 1,640.00
6.30 Entrance, Lever Lockset set 2,820.00
6.31 Bathroom, Lockset Keyless set 1,080.00
6.32 Hinges, Standard 3-1/2" x 3-1/2" pa 75.00
6.33 Hinges, Ball Bearing 3-1/2" x 3-1/2" pa 680.00
6.34 D-1, Flush Door 0.90m x 2.10m on 100mm Wooden Jamb complete with Accessories set 3,267.50

W - 1, ( 2.6 x 1.6 m) Jalousie Window with Clear Glass Blades on Standard Aluminum
6.35 Casing and Fixed Clear Glass Transom on 50 x 100 mm Wooden Jamb complete with set 5,500.00
Accessories

W - 2, ( 1.3 x 1.6 m) Jalousie Window with Clear Glass Blades on Standard Aluminum
6.36 Casing and Fixed Clear Glass Transom on 50 x 100 mm Wooden Jamb complete with set 2,750.00
Accessories

W - 1, ( 3.6 x 1.6 m) Jalousie Window with Clear Glass Blades on Standard Aluminum
6.37 Casing and Fixed Clear Glass Transom on 50 x 150 mm Wooden Jamb complete with set 9,250.00
Accessories

W - 2, ( 3.6 x 1.2 m) Jalousie Window with Clear Glass Blades on Standard Aluminum
6.38 Casing and Fixed Clear Glass Transom on 50 x 150 mm Wooden Jamb complete with set 6,950.00
Accessories

W - 3, ( 1.8 x 1.6 m) Jalousie Window with Clear Glass Blades on Standard Aluminum
6.39 Casing and Fixed Clear Glass Transom on 50 x 150 mm Wooden Jamb complete with set 4,600.00
Accessories

W - 4, ( 0.6 x 0.95 m) Jalousie Window with Clear Glass Blades on Standard Aluminum
6.39a Casing and Fixed Clear Glass Transom on 50 x 150 mm Wooden Jamb complete with set 910.42
Accessories

W - 4, ( 0.6 x 0.6 m) Jalousie Window with Clear Glass Blades on Standard Aluminum
6.40 Casing and Fixed Clear Glass Transom on 50 x 150 mm Wooden Jamb complete with set 700.00
Accessories

W - 1, ( 4.0 x 1.8 m) Jalousie Window with Clear Glass Blades on Standard Aluminum
6.41 Casing and Fixed Clear Glass Transom on 50 x 150 mm Wooden Jamb complete with set 11,520.00
Accessories
 W - 2, ( 2.1 x 1.8 m) Jalousie Window with Clear Glass Blades on Standard Aluminum
6.42 Casing and Fixed Clear Glass Transom on 50 x 150 mm Wooden Jamb complete with set 6,048.00
Accessories

W - 3, ( 1.3 x 1.8 m) Jalousie Window with Clear Glass Blades on Standard Aluminum
6.43 Casing and Fixed Clear Glass Transom on 50 x 150 mm Wooden Jamb complete with set 3,744.00
Accessories

W - 4, ( 1.2 x 0.7 m) Jalousie Window with Clear Glass Blades on Standard Aluminum
6.44 Casing and Fixed Clear Glass Transom on 50 x 150 mm Wooden Jamb complete with set 1,344.00
Accessories

W - 2, ( 1.3 x 1.6 m) Jalousie Window with Clear Glass Blades on Standard Aluminum
6.45 Casing and Fixed Clear Glass Transom on 50 x 150 mm Wooden Jamb complete with set 3,350.00
Accessories

6.46 D-3 Flush Door 0.60m x 2.10m on 150mm Wooden Jamb complete with Accessories set 3,207.50

D-1, (0.90 x 2.10) Steel Door and Jamb with Fixed Glass Transom complete with
6.47 set 6,000.00
Accessories
D-2, (0.80 x 2.10) Steel Door and Jamb with Fixed Glass Transom complete with
6.48 set 5,800.00
Accessories
D-3, (0.90 x 2.10) Steel Door and Jamb with Steel Grilles Transom and Stainless Kick
6.49 set 6,500.00
Plate complete with Accessories
D-4, (0.70 x 2.10) Steel Door and Jamb with Fixed Glass Transom complete with
6.50 set 5,500.00
Accessories

W - 1, ( 2.4 x 1.5 m) Steel Casement Window with Grilles, Semi French Type with 1/4 thk
6.51 set 5,750.00
Clear Glass Panes complete with Accessories

W - 2, ( 1.8 x 1.5 m) Steel Casement Window with Grilles, Semi French Type with 1/4 thk
6.52 set 4,350.00
Clear Glass Panes complete with Accessories

W - 3, ( 1.8 x 1.2 m) Steel Casement Window with Grilles, Semi French Type with 1/4 thk
6.53 set 3,500.00
Clear Glass Panes complete with Accessories

W - 4, ( 0.6 x 0.6 m) Steel Awning Window with Grilles with 1/4 thk Clear Glass Panes
6.54 set 750.00
complete with Accessories

7.00 Steel Works -

7.01 C 6 x 10.5 kg 54.73
7.02 C 6 x 8.2 kg 54.73
7.03 LC 75 x 38 x 15 x 2.0mm kg 41.06
7.04 LC 100 x 50 x 15 x 1.5mm kg 41.06
7.05 LC 100 x 50 x 15 x 2.0mm kg 41.06
7.06 LC 100 x 50 x 15 x 3.0mm kg 41.06
7.07 LC 150 x 65 x 20 x 2.0mm kg 41.06
7.08 LC 150 x 65 x 20 x 3.0mm kg 41.06
7.09 LC 120 x 50 x 20 x 2.0mm kg 41.06
7.10 LC 120 x 50 x 20 x 3.0mm kg 41.06
7.11 L 25 x 25 x 3mm kg 44.83
7.12 L 30 x 30 x 6mm kg 44.83
7.13 L 50 x 50 x 5mm kg 44.83
7.14 L 50 x 50 x 6mm kg 44.83
7.15 Flat Bar 1" x 1/8" kg 44.83
7.16 Flat Bar 1" x 3/16" kg 44.83
7.17 Flat Bar 1" x 1/4" kg 44.83
7.18 Plain Round Bar 10mmØ x 6m pc 107.00
7.19 Plain Round Bar 12mmØ x 6m pc 185.00
7.20 Plain Round Bar 16mmØ x 6m pc 286.00
7.21 Square Bar 12mm□ x 6m pc 141.00
7.22 Square Bar 16mm□ x 6m pc 218.00
7.23 Square Bar 19mm□ x 6m pc 412.00
7.24 Steel Plate 1.20m x 2.40m x 12mm pc 10,500.00
7.25 Steel Plate 1.20m x 2.40m x 10mm pc 9,300.00
7.26 Steel Plate 1.20m x 2.40m x 9mm pc 8,635.00
7.27 Steel Plate 1.20m x 2.40m x 6mm pc 5,390.00
7.28 Tubular 50mm x 150mm x 2.0mm pc 2,640.00
7.29 Tubular 50mm x 100mm x 1.5mm pc 1,085.00
7.30 Turn Buckle 12 mmØ pc 60.00
7.31 Turn Buckle 16 mmØ pc 80.00
7.32 Anchor Bolt with Nuts and Washer, 20mmØ x 50mm x 300mm pc 65.00
7.33 Anchor Bolt with Nuts and Washer, 16mmØ x 50mm x 300mm pc 45.00
7.34 Anchor Bolt with Nuts and Washer, 12mmØ x 50mm x 300mm pc 27.00
7.35 Anchor Bolt with Nuts and Washer, 10mmØ x 50mm x 200mm pc 12.00
7.36 B.I. Pipe 100mmØ Sch.40 pc 2,262.00
7.37 B.I. Pipe 75mmØ Sch.40 pc 1,658.00
7.38 B.I. Pipe 50mmØ Sch.40 pc 880.00
7.39 B.I. Pipe 38mmØ Sch.40 pc 632.00
7.40 B.I. Pipe 32mmØ Sch.40 pc 537.00
7.41 B.I. Pipe 50mmØ Sch.20 pc 691.00
7.42 B.I. Pipe 38mmØ Sch.20 pc 499.00
7.43 B.I. Pipe 32mmØ Sch.20 pc 435.00
7.44 G.I. Pipe 1-1/4"Ø Sch.40 pc 1,411.41
7.45 G.I. Pipe 2"Ø Sch.40 pc 2,270.72
7.46 Welding Rod kg 67.00
7.47 Primer, Zinc Chromate gal 560.00
8.00 Roofing Works -
8.01 Removal of Roofing Sheets sq.m -
8.02 Removal of Ridge Roll pc -
8.03 Removal of Flashing pc -
8.04 Removal of Gutter pc -
8.05 Removal of Fascia Board m -
8.06 Corrugated G.I. Sheet Ga.26, 36" x 8' pc 472.00
8.07 Corrugated G.I. Sheet Ga.26, 36" x 9' pc 531.00
8.08 Corrugated G.I. Sheet Ga.26, 36" x 10' pc 590.00
8.09 Corrugated G.I. Sheet Ga.26, 36" x 12' pc 708.00
8.09a Ord. Corrugated G.I. Sheet Ga.26 x 36" x length pc 45.00
8.10 Plain G.I. Sheet Ga.26, 4' x 8' pc 400.00
8.11 Plain G.I. Sheet Ga.26, 3' x 8' pc 280.00
8.12 Gutter Ga.26, 24" x 8' pc 150.00
8.13 Flashing Ga.26, 24"x 8' pc 280.00
8.14 Ridge Roll Ga.26, 24"x 8' pc 280.00
8.15 Long-Span Roofing, Rib-Type, Pre-Painted, 1220mm x 0.4mm thk m 374.00
8.16 Long-Span Roofing, Corrugated, Pre-Painted, 1220mm x 0.4mm thk m 398.00
8.17 Ridge Roll, Pre-Painted, Ordinary, 0.610m x 2.440m x 0.4mm thk pc 544.00
8.18 Ridge Roll, Pre-Painted, Ordinary, 0.915m x 2.440m x 0.4mm thk pc 864.00
8.19 Flashing, Pre-Painted, Ordinary, 0.610m x 2.440m x 0.4mm thk pc 544.00
8.20 Flashing, Pre-Painted, Ordinary, 0.915m x 2.440m x 0.4mm thk pc 864.00
8.21 Flashing, Pre-Painted, Spanish, 0.610m x 2.440m x 0.4mm thk pc 767.00
8.22 Gutter, Pre-Painted, Ordinary, 0.610m x 2.440m x 0.4mm thk pc 544.00
8.23 Gutter, Pre-Painted, Ordinary, 0.915m x 2.440m x 0.4mm thk pc 864.00
8.24 Gutter, Stainless, Ordinary, 0.610m x 2.440m x 0.4mm thk pc 767.00
8.25 Gutter, Pre-Painted, Spanish, 0.610m x 2.440m x 0.4mm thk m 68.00
8.26 Polyethylene Foam with One Side Aluminum 10mm thk m 105.00
8.27 Polyethylene Foam with One Side Aluminum 15mm thk m 142.00
8.28 Polyethylene Foam with One Side Aluminum 20mm thk m 179.50
8.29 Polyethylene Foam with One Side Aluminum 25mm thk m 216.50
8.30 Polyethylene Foam with Two Side Aluminum 5mm thk m 103.50
8.31 Polyethylene Foam with Two Side Aluminum 10mm thk m 141.00
8.32 Polyethylene Foam with Two Side Aluminum 15mm thk m 178.00
8.33 Polyethylene Foam with Two Side Aluminum 20mm thk m 215.00
8.34 Polyethylene Foam with Two Side Aluminum 25mm thk m 252.00
8.35 Teckscrew 2-1/2" pc 1.25
8.36 Roof Sealant L 239.80
8.37 Blind Rivets pc 0.50
8.38 Umbrella Nails kg 60.00
9.00 Carpentry Works -
9.01 Removal of Ceiling sq.m -
9.02 Plywood, Ordinary 1/4" x 4' x 8' pc 350.00
9.03 Plywood, Ordinary 3/8" x 4' x 8' pc 58.00
9.04 Plywood, Ordinary 1/2" x 4' x 8' pc 546.22
9.05 Plywood, Ordinary 3/4" x 4' x 8' pc 850.00
9.06 Plywood, Marine 1/4" x 4' x 8' pc 350.00
9.07 Plywood, Marine 1/2" x 4' x 8' pc 650.00
9.08 Plywood, Marine 3/4" x 4' x 8' pc 1,050.00
9.09 Fiber Cement Board, 1/4" x 4' x 8' pc 540.00
9.10 Fiber Cement Board, 3/16" x 4' x 8' pc 390.00
9.11 Rough Lumber, Sun Dried, Yakal bd.ft 120.00
9.12 Rough Lumber, Sun Dried, Guijo bd.ft 120.00
9.13 Rough Lumber, Sun Dried, Tanguile bd.ft 45.50
9.14 S4S Lumber, Kiln Dried, Tanguile bd.ft 50.00
9.15 Ceiling Vent 1" x 12" x 4' with Screen pc 245.00
9.16 Fascia Board, Wooden bd.ft 39.00
9.17 Fascia Board, Fiber Cement 10" x 8' pc 279.00
9.18 Fascia Board, Fiber Cement 12" x 8' pc 325.00
9.19 Fascia Board, Fiber Cement 10" x 12' pc 352.50
9.20 Fascia Board, Fiber Cement 12" x 12' pc 405.00
9.21 Ficem Board Nails kg 90.00
9.22 Finishing Nails kg 70.00
9.23 Common Wire Nails kg 50.00
9.24 Concrete Nails kg 70.00
9.25 Removal of T&G bd.ft -
9.26 T&G 3/4" x 4" ft 20.00
9.27 T&G 3/4" x 6" ft 32.50
9.28 Wood Glue L 120.00
9.29 Acoustic Board 2' x 4' pc 320.00
9.30 Main Tee Runner 1" x 1" x 10' pc 98.85
9.31 Cross Tee 1" x 1" x 10' pc 90.00
9.32 Wall Angle 1" x 1" x 10' pc 90.00
9.33 Suspension Rod #8 kg 145.00
9.34 Removal of Wooden Truss bd.ft -
9.35 Removal of Purlins bd.ft -
9.36 Removal of Partition sq.m -
9.37 Machine Bolts with Std. Nuts and Washers, 5/8" x 7" pc 18.00
9.38 Machine Bolts with Std. Nuts and Washers, 5/8" x 8" pc 20.00
9.39 Machine Bolts with Std. Nuts and Washers, 5/8" x 10" pc 25.00
9.40 Machine Bolts with Std. Nuts and Washers, 1/2" x 7" pc 12.00
9.41 Machine Bolts with Std. Nuts and Washers, 1/2" x 8" pc 15.00
9.42 Wood Preservative, Brown L 900.00
9.43 Lawanit, 1/4" thk pc 280.00
9.44 Concealed Hinges pc 30.00
9.45 S.S. Cabinet Handle pc 90.00
9.46 6mm thk Clear Glass sq.ft 60.00
9.47 S.S. Tube 3/4"Ø m 420.00
9.48 S.S. Flange 3/4"Ø pa 75.00
9.49 Drawer Guide, Metal 20" Full Extension set 420.00
9.50 Folding Door, Full Louver 450 x 1830mm set 1,435.00
9.51 Heavy Duty Steel Track with Roller m -
9.52 Removal of Interior Ceiling sq.m
9.53 Removal of Exterior Ceiling sq.m
10.00 Electrical Works -
10.01 Electrical Conduit uPVC, 15mmØ pc 50.00
10.02 Electrical Conduit uPVC, 20mmØ pc 69.75
10.03 Electrical Conduit uPVC, 32mmØ pc 137.50
10.04 Electrical Conduit uPVC, 40mmØ pc 192.50
10.05 Electrical Conduit uPVC, 50mmØ pc 214.75
10.06 RSC 20mmØ pc 112.50
10.07 RSC 25mmØ pc 175.00
10.08 RSC 32mmØ pc 339.00
10.09 RSC 38mmØ pc 430.50
10.10 30.0 mm THW Wire, Stranded
2
m 220.00
10.11 3.5 mm2 THW Wire, Stranded m 33.05
10.12 5.5 mm THW Wire, Stranded
2
m 62.75
10.13 8.0 mm2 THW Wire, Stranded m 98.39
10.14 14.0 mm THW Wire, Stranded
2
m 105.00
10.15 22.0 mm2 THW Wire, Stranded m 166.00
10.16 Junction Box, 4" x 4" G.I. pc 15.00
10.17 Utility Box, 2" x 4" G.I. pc 30.00
10.18 FL 2 x 40W Recessed Type with Luminare 24" x 48" set 2,600.00
10.19 FL 1 x 40W Recessed Type with Luminare 6" x 48" set 1,184.50
10.20 FL 2 x 40W Industrial Type set 1,055.00
10.21 FL 1 x 40W Industrial Type set 600.00
10.22 FL 1 x 20W Industrial Type set 440.00
10.23 Single Switch with Plate pc 97.68
10.24 2-Gang Switch with Plate pc 153.00
10.25 3-Gang Switch with Plate pc 208.00
10.26 3-Way Switch with Plate pc 251.00
10.27 Single C.O. with Plate pc 88.00
10.28 Duplex C.O. with Plate pc 263.80
10.29 Duplex C.O. Weatherproof pc 756.50
10.30 Aircon Outlet with Plate pc 282.75
10.31 TV Terminal Outlet with Plate pc 322.50
10.32 Telephone Outlet with Plate pc 251.00
10.33 Ceiling Receptacle 3-1/2"Ø pc 25.00
10.34 Entrance Cap 20mm dia. pc 50.00
10.35 Entrance Cap 32mm dia. pc 75.00
10.36 Entrance Cap 25mm dia. pc 70.00
10.37 Grounding Rod, 2.4m x 16mm dia. pc 150.00
10.38 Circuit Breaker, 20A 2P set 313.00
10.39 Circuit Breaker, 30A 2P set 313.00
10.40 Circuit Breaker, 40A 2P set 441.25
10.41 Circuit Breaker, 50A 2P set 441.25
10.42 Circuit Breaker, 60A 2P set 441.25
10.43 Circuit Breaker, 100A 2P set 650.00
10.44 Circuit Breaker, 175A 2P set -
10.45 Safety Switch 100A 2P set 2,224.75
10.46 Safety Switch 30A 2P set 603.25
10.47 Panel Box, Flush Type, 6 Branches set 1,400.00
10.48 Panel Box, Flush Type, 4 Branches set 1,202.75
10.49 Panel Box, Flush Type, 8 Branches set 1,580.00
10.50 Panel Box, Flush Type, 12 Branches set 2,530.75
10.51 Panel Box, Flush Type, 10 Branches set 1,850.00
10.52 Flourescent Tube 40W set -
10.53 Incandescent Bulb 50W set 35.00
10.54 Vibrating Bell 8" set 1,500.00
10.55 Fire Alarm Bell, Vibrating Type set 2,000.00
10.56 Fire Alarm Station, Manual Single Action set 1,750.00
10.57 Fire Alarm Control Panel, One Zone set 5,500.00
10.58 Electrical Tape pc 37.50
10.59 Rubber Tape roll 100.00
11.00 Plumbing Works -
11.01 uPVC Water Line 1/2"Ø pc 55.00
11.02 uPVC Water Line 3/4"Ø pc 85.00
11.03 uPVC Water Line 1"Ø pc 112.00
11.04 G.I. Pipe 1"Ø Sch.40 pc 460.00
11.05 G.I. Pipe 3/4"Ø Sch.40 pc 360.00
11.06 G.I. Pipe 1/2"Ø Sch.40 pc 260.00
11.07 G.I. Coupling, 3/8"Ø pc 11.00
11.08 G.I. Coupling, 1/2"Ø pc 10.75
11.09 G.I. Coupling, 3/4"Ø pc 14.75
11.10 G.I. Coupling, 1"Ø pc 23.75
11.11 G.I. Coupling, 1-1/2"Ø pc 35.00
11.12 G.I. Coupling, 2"Ø pc 45.00
11.13 G.I. Coupling, 3"Ø pc 150.00
11.14 G.I. Tee, 3/8"Ø pc 19.75
11.15 G.I. Tee, 1/2"Ø pc 17.75
11.16 G.I. Tee, 3/4"Ø pc 21.25
11.17 G.I. Tee, 1"Ø pc 42.75
11.18 G.I. Tee, 3/8" x 1/2"Ø pc 23.75
11.19 G.I. Tee, 3/4" x 1/2"Ø pc 41.25
11.20 G.I. Tee, 1" x 1/2"Ø pc 41.25
11.21 G.I. Elbow 90 x 1/2"Ø
o
pc 11.00
11.22 G.I. Elbow 90o x 3/4"Ø pc 20.75
11.23 G.I. Elbow 90 x 1"Ø
o
pc 33.75
11.24 G.I. Coupling Reducer, 1/2" x 3/4"Ø pc 40.00
11.25 G.I. Coupling Reducer, 1-1/2" x 1/2"Ø pc 40.00
11.26 G.I. Coupling Reducer, 2" x 1"Ø pc 58.25
11.27 G.I. Plug, 1/2"Ø pc 9.75
11.28 G.I. Plug, 3/4"Ø pc 12.50
11.29 G.I. Plug, 1"Ø pc 20.50
11.30 G.I. Plug, 1-1/2"Ø pc 30.75
11.31 G.I. Plug, 2"Ø pc 42.50
11.32 S.S. Elbow 90 x 1/2"Ø
o
pc 90.00
11.33 S.S. Elbow 90o x 3/4"Ø pc 146.00
11.34 S.S. Elbow 90o x 1"Ø pc 230.00
11.35 S.S. Coupling, 3/4"Ø pc 130.00
11.36 S.S. Coupling, 1"Ø pc 200.00
11.37 S.S. Tee, 1/2"Ø pc 130.00
11.38 S.S. Tee, 3/4"Ø pc 200.00
11.39 S.S. Tee, 1"Ø pc 330.00
11.40 S.S. Union Patente, 1/2"Ø pc 300.00
11.41 S.S. Union Patente, 3/4"Ø pc 400.00
11.42 S.S. Bushing, 3/4"Ø pc 60.00
11.43 S.S. Bushing, 1"Ø pc 130.00
11.44 Gate Valve, 1/2"Ø pc 250.00
11.45 Gate Valve, 3/4"Ø pc 320.00
11.46 Gate Valve, 1"Ø pc 435.00
11.47 Gate Valve, 1-1/4"Ø pc 590.00
11.48 Gate Valve, 1-1/2"Ø pc 765.00
11.49 Gate Valve, 2"Ø pc 1,315.00
11.50 Gate Valve, 2-1/2"Ø pc 2,415.00
11.51 Gate Valve, 3"Ø pc 3,375.00
11.52 Check Valve, Horizontal, 1/2"Ø pc 78.00
11.53 Check Valve, Horizontal, 3/4"Ø pc 105.00
11.54 Check Valve, Horizontal, 1"Ø pc 167.00
11.55 Check Valve, Vertical, 1/2"Ø pc 167.25
11.56 Check Valve, Vertical, 3/4"Ø pc 271.50
11.57 Check Valve, Vertical, 1"Ø pc 314.50
11.58 Angle Valve 3/8" x 1/2"Ø pc 150.00
11.59 Faucet, Plain Bibb, Brass 1/2"Ø pc 136.00
11.60 Faucet, Hose Bibb, Brass 1/2"Ø pc 160.00
11.61 Water Closet Flange set 262.50
11.62 Water Closet 1.6gpf with Accessories set 5,500.00
11.63 Urinal 0.8gpf set 5,900.00
11.64 Lavatory, Pedestal Type with Accessories set 3,150.00
11.65 S.S.Floor Drain 4' x 4" pc 97.50
11.66 Teflon Tape roll 12.00
11.67 Tissue Holder pc 250.00
11.68 S.S. Grab Rail 1-1/2"Ø pc 2,900.00
11.69 Mirror sq.ft 100.00
11.70 Faucet, Lavatory set 800.00
11.71 Faucet, Sink set 1,250.00
11.72 S.S. Sink with Strainer and P-Trap set 3,000.00
11.73 S.S. Sink with Strainer and P-Trap (Double) set 7,000.00
11.74 S.S. Grease Trap set 2,500.00
11.75 Shower Set set 1,800.00
11.76 S.S.Strainer 4" pc -
12.00 Sanitary Works -
12.01 Catch Basin unit 1,500.00
12.02 Concrete Pipe 150mmØ pc 200.00
12.03 Concrete Pipe 300mmØ pc 450.00
12.04 PVC Pipe 2"Ø pc 168.50
12.05 PVC Pipe 3"Ø pc 339.50
12.06 PVC Pipe 4"Ø pc 451.50
12.07 uPVC Sanitary Pipe 2"Ø pc 210.00
12.08 uPVC Sanitary Pipe 3"Ø pc 420.00
12.09 uPVC Sanitary Pipe 4"Ø pc 560.00
12.10 uPVC Sanitary Pipe 6"Ø pc 1,200.00
12.11 uPVC Elbow 90o x 2"Ø pc 25.00
12.12 uPVC Elbow 90o x 3"Ø pc 53.00
12.13 uPVC Elbow 90 x 4"Ø
o
pc 96.00
12.14 uPVC Elbow 1/8 x 2"Ø pc 20.50
12.15 uPVC Elbow 1/8 x 3"Ø pc 39.50
12.16 uPVC Elbow 1/8 x 4"Ø pc 82.50
12.17 uPVC Tee 2" x 2" pc 36.00
12.18 uPVC Tee 3" x 3" pc 71.95
12.19 uPVC Tee 4" x 2" pc 89.00
12.20 uPVC Tee 4" x 3" pc 109.00
12.21 uPVC Tee 4" x 4" pc 138.00
12.22 uPVC Wye 2" x 2" pc 38.00
12.23 uPVC Wye 2" x 3" pc 60.50
12.24 uPVC Wye 3" x 3" pc 81.00
12.25 uPVC Wye 4" x 2" pc 97.00
12.26 uPVC Wye 4" x 3" pc 122.00
12.27 uPVC Wye 4" x 4" pc 165.00
12.28 Brass Cleanout 4" x 4" pc 350.00
12.29 Brass Cleanout 6" x 6" pc 675.00
12.30 uPVC P-Trap 2" pc 66.00
12.31 uPVC P-Trap 4" pc 262.00
12.32 Septic Vault unit #REF!
12.33 PVC Cement can 150.00
12.34 Waste Vault unit 4,620.00
13.00 Painting Works -
13.01 Latex, Flat gal 425.00
13.02 Latex, Semi Gloss gal 513.87
13.03 Latex, Gloss gal 536.00
13.04 Enamel, Flatwall gal 470.00
13.05 Enamel, Semi Gloss gal 500.00
13.06 Enamel, Quick Dry gal 558.20
13.07 Enamel, Epoxy gal 830.00
13.08 Enamel, Traffic Paint gal 480.00
13.09 Primer, Red Lead gal 585.14
13.10 Primer, Red Oxide gal 505.04
13.11 Primer, Epoxy gal 650.00
13.12 Primer, Zinc Chromate gal 560.00
13.13 Gloss Acrylic Roof Paint gal 535.00
13.14 Masonry Putty gal 319.00
13.15 Glazing Putty gal 492.00
13.16 Paint Thinner gal 260.00
13.17 Lacquer Thinner gal 311.00
13.18 Neutralizer gal 132.00
13.19 Calsomine Powder kg 20.00
13.20 Acri Color qrt 165.00
13.21 Tinting Color qrt 180.00
13.22 Sanding Sealer gal 519.00
13.23 Lacquer, Automotive White gal 715.00
13.24 Lacquer, Gloss Enamel gal 665.00
13.25 Lacquer, Water White gal 486.00
13.26 Lacquer, Dead Flat gal 515.00
13.27 Lacquer, Primer Surfacer gal 538.00
13.28 Lacquer, Spot Putty gal 521.00
13.29 Textured Paint gal 632.00
13.30 Oil Wood Stain gal 240.00
13.31 Polyurethane Paint gal 2,058.00
13.32 Wood Bleach #1 L 37.75
13.33 Wood Bleach #2 L 130.75
13.34 Paint Remover gal 423.50
13.35 Polytuff qrt 150.00
13.36 Paint Brush 2" pc 45.00
13.37 Paint Brush 3" pc 60.00
13.38 Paint Brush 4" pc 85.00
13.39 Roller Brush 7" pc 90.00
13.40 Baby Roller pc 70.00
13.41 Design Roller pc 300.00
13.42 Steel Brush pc 50.00
13.43 Sand Paper #100 m 75.00
13.44 Sand Paper #80 m 100.00
14.00 Tile Works -
14.01 Unglazed Floor Tiles 20cm x 20cm pc 12.00
14.02 Unglazed Floor Tiles 30cm x 30cm pc 30.40
14.03 Unglazed Floor Tiles 40cm x 40cm pc 51.50
14.04 Glazed Wall Tiles 20cm x 20cm pc 14.00
14.05 Glazed Wall Tiles 20cm x 30cm pc 20.50
14.06 Glazed Wall Tiles 30cm x 30cm pc 23.67
14.07 Glazed Wall Tiles 40cm x 40cm pc 41.75
14.08 Vinyl Tiles, 12" x 12" x 1.3mm pc 13.50
14.09 Vinyl Tiles, 18" x 18" x 2.0mm pc 115.75
14.10 Vinyl Tiles, 4" x 36" x 1.3mm pc 17.75
14.11 Vinyl Tiles, 4" x 36" x 1.7mm pc 21.25
14.12 Carpet Tiles 50cm x 50cm pc 200.00
14.13 Tile Trim 6mm pc 97.75
14.14 Tile Grout 2 kg/bag bag 49.00
14.15 Tile Grout 5 kg/bag bag 150.00
14.16 Tile Adhesive 25 kg/bag bag 224.10
14.17 Grout Sealer L 495.00
14.18 Tile Adhesive Modifier L 190.00
14.19 Contact Cement gal 561.00
15.00 Waterproofing -
15.01 Waterproofing, Cementitious gal -
15.02 Waterproofing, Elastomeric gal -
 Labor
Unit Cost UNIT PRICES
Cement 225.00
20.00 Crushed Gravel 3/4" 550.00
200.00 Washed Sand 350.00
45.00 Deformed Bars, Grade 40 41.50
180.00
4.50
45.00
-
42.50
175.00
150.00
500.00
150.00
-
6.47
9.00
262.50
-
4.20
90.00
162.00
18.00
-
360.00
51.00
180.00
2.25
3.00
9.03
15.00
9.00
62.50
-
88.76
24.16
887.63
529.13
517.13
443.81
1,005.00
570.00
525.00
675.00
660.00
 540.00
540.00
225.00
225.00
210.00
210.00
656.25
675.00
690.00
232.50
157.50
217.50
232.50
56.25
40.50
46.75
776.00
164.00
282.00
108.00
7.50
68.00
302.75

550.00

275.00

1,387.50

1,042.50

690.00

182.40

105.00

1,728.00
 907.20

561.60

201.60

502.50

487.13

1,800.00
1,740.00
1,800.00
1,650.00

2,012.50

1,522.50

1,225.00

262.50

-
11.55
11.55
-
11.55
11.55
11.55
11.55
11.55
11.55
11.55
10.73
11.14
11.14
11.14
11.14
11.14
 11.14
32.10
55.50
85.80
42.30
65.40
123.60
3,150.00
2,790.00
2,590.50
1,617.00
792.00
325.50
18.00
24.00
19.50
13.50
8.10
3.60
678.60
497.40
264.00
189.60
161.10
207.30
149.70
130.50
118.41
262.78
20.10
161.10
-
7.50
15.00
15.00
15.00
9.60
51.20
57.60
64.00
76.80
13.50
80.00
52.00
30.00
30.00
30.00
118.50
101.24
114.11
181.50
114.13
181.50
180.00
124.50
181.50
124.50
180.00
31.50
42.60
53.85
64.95
31.05
42.30
53.40
64.50
75.60
0.38
48.00
0.15
18.00
-
8.00
90.00
156.00
162.00
255.00
105.00
195.00
315.00
103.50
90.60
36.00
36.00
10.80
17.13
73.50
10.80
70.50
81.00
105.75
121.50
27.00
21.00
15.00
21.00
 5.00
6.00
9.75
36.00
96.00
27.00
27.00
27.00
43.50
4.00
4.00
8.00
5.40
6.00
7.50
3.60
4.50
270.00
84.00
3.00
9.00
18.00
42.00
7.50
42.00
430.50
495.00
8.00
10.00
-
15.00
20.93
41.25
57.75
64.43
33.75
52.50
101.70
129.15
54.00
7.02
10.14
16.38
25.35
40.17
4.50
4.28
390.00
177.68
126.00
73.50
66.00
13.46
21.53
29.59
37.65
13.20
21.00
76.50
42.41
48.38
37.65
3.75
7.50
11.25
10.50
22.50
46.95
46.95
66.19
66.19
66.19
97.50
-
333.71
90.49
210.00
180.41
237.00
379.61
277.50
-
5.25
225.00
300.00
262.50
825.00
5.63
15.00
-
16.50
25.50
33.60
138.00
108.00
78.00
 3.30
3.23
4.43
7.13
10.50
13.50
45.00
5.93
5.33
6.38
12.83
7.13
12.38
12.38
3.30
6.23
10.13
12.00
12.00
17.48
2.93
3.75
6.15
9.23
12.75
27.00
43.80
69.00
39.00
60.00
39.00
60.00
99.00
90.00
120.00
18.00
39.00
75.00
96.00
130.50
177.00
229.50
394.50
724.50
1,012.50
23.40
31.50
50.10
 50.18
81.45
94.35
45.00
40.80
24.00
39.38
825.00
885.00
472.50
14.63
1.80
37.50
435.00
15.00
120.00
187.50
450.00
1,050.00
375.00
270.00
50.00
-
450.00
60.00
135.00
50.55
101.85
135.45
63.00
126.00
168.00
360.00
7.50
15.90
28.80
6.15
11.85
24.75
10.80
21.59
26.70
32.70
41.40
11.40
18.15
24.30
29.10
 36.60
49.50
105.00
202.50
19.80
78.60
#REF!
45.00
1,386.00
-
127.20
147.75
154.80
144.90
149.10
152.33
239.40
138.00
168.90
146.10
187.80
161.10
154.50
95.70
147.60
78.00
93.30
39.60
6.00
49.50
54.00
155.70
214.50
199.50
145.80
154.50
161.40
156.30
189.60
72.00
617.40
11.33
39.23
127.05
45.00
6.75
9.00
12.75
 13.50
10.50
45.00
7.50
11.25
15.00
-
3.60
9.12
15.45
4.20
6.15
7.10
12.53
4.05
34.73
5.33
6.38
60.00
29.33
14.70
45.00
67.23
148.50
57.00
168.30
-
100.00
100.00
 “Our company seeks to deliver the best quality projects and services at the most reasonable cost within the set time frame”

PROJECT : REPAIR and REHABILITATION OF TWO(2) CLASSROOMS SCHOOL BUILDING

SCHOOL : AMBITACAY ELEMENTARY SCHOOL
LOCATION : AGOO, LA UNION
OWNER : DEPARTMENT OF EDUCATION
SUBJECT : BILL OF QUANTITIES (DETAILED ESTIMATE)
UNIT COST TOTAL COST
I.D. NO DESCRIPTION UNIT QTY
MATERIAL LABOR MATERIAL
A GENERAL REQUIREMENTS
Mobilization/Temporary Structures, Utilities and
Services/Demobilization lot 0.00 0.00 0.00
Sub-total
B Concreting Works
Column cu.m
2.01 Portland Cement bag 225.00 42.50 0.00
2.02 Crushed Gravel 3/4" cu.m 550.00 175.00 0.00
2.03 Washed Sand cu.m 350.00 150.00 0.00
Beam cu.m
2.01 Portland Cement bag 225.00 42.50 0.00
2.02 Crushed Gravel 3/4" cu.m 550.00 175.00 0.00
2.03 Washed Sand cu.m 350.00 150.00 0.00
Sub-total
C Rebar Works
Column kg
Beam kg
3.01 Deformed Round Bars, Grade 40 kg 41.50 6.47 0.00
3.02 G.I. Tie Wire kg 50.00 9.00 0.00
Sub-total
D Formworks
Column sq.m
4.01 Coco Lumber bd.ft 13.00 4.20 0.00
4.02 Plywood Ordinary, 1/4" x 4' x 8' pc 350.00 90.00 0.00
4.04 CWN, Assorted kg 60.00 18.00 0.00
Beam sq.m
4.01 Coco Lumber bd.ft 13.00 4.20 0.00
4.02 Plywood Ordinary, 1/4" x 4' x 8' pc 350.00 45.00 0.00
4.04 CWN, Assorted kg 60.00 18.00 0.00
Sub-total
E Masonry Works
Masonry Wall sq.m
5.04 CHB 4" thk pc 7.00 2.25 0.00
5.02 Portland Cement bag 225.00 51.00 0.00
5.03 Washed Sand cu.m 350.00 180.00 0.00
5.06 10mm x 6m RSB kg 41.50 9.03 0.00
5.07 G.I. Tie Wire kg 50.00 15.00 0.00
Plastering sq.m
5.02 Portland Cement bag 225.00 51.00 0.00
5.03 Washed Sand cu.m 350.00 180.00 0.00
Sub-total
F Steel Works
7.07 LC 150 x 65 x 20 x 2.0mm kg 41.06 11.55 0.00
7.03 LC 75 x 38 x 15 x 2.0mm kg 41.06 0.00 0.00
7.11 L 25 x 25 x 3mm kg 44.83 10.73 0.00
7.17 Flat Bar 1" x 1/4" kg 44.83 11.14 0.00
7.18 Plain Round Bar 10mmØ x 6m pc 107.00 32.10 0.00
7.25 Steel Plate 1.20m x 2.40m x 10mm pc 9,300.00 2,790.00 0.00

7.33 Anchor Bolt with Nuts and Washer, 16mmØ x pc 45.00 13.50 0.00
50mm x 300mm

7.35 Anchor Bolt with Nuts and Washer, 10mmØ x pc 12.00 3.60 0.00
50mm x 200mm
7.46 Welding Rod kg 67.00 20.10 0.00
7.47 Primer, Zinc Chromate gal 560.00 161.10 0.00
Sub-total
G Roofing Works
8.01 Removal of Roofing Sheets sq.m 0.00 7.50 0.00
8.02 Removal of Ridge Roll pc 0.00 15.00 0.00
8.03 Removal of Flashing pc 0.00 15.00 0.00
8.05 Removal of Fascia Board m 0.00 9.60 0.00

8.09a Ord. Corrugated G.I. Sheet Ga.26 x 36" x length pc 45.00 13.50 0.00

8.14 Ridge Roll Ga.26, 24"x 8' pc 280.00 30.00 0.00

8.13 Flashing Ga.26, 24"x 8' pc 280.00 30.00 0.00
8.35 Teckscrew 2-1/2" pc 1.25 0.38 0.00
8.36 Roof Sealant L 239.80 48.00 0.00
Sub-total
H Carpentry Works
Others
9.15 Ceiling Vent 1" x 12" x 4' with Screen pc 245.00 73.50 0.00
9.19 Fascia Board, Fiber Cement 10" x 12' pc 352.50 105.75 0.00
9.52 Removal of Interior Ceiling sq.m 0.00 8.00 0.00
9.53 Removal of Exterior Ceiling sq.m 0.00 10.00 0.00
9.34 Removal of Wooden Truss bd.ft 0.00 4.00 0.00
Sub-total
I Doors and Windows
6.01 Removal of Door with Jamb set 0.00 88.76 0.00

W - 2, ( 1.3 x 1.6 m) Jalousie Window with Clear set 2,750.00 275.00 0.00
Glass Blades on Standard Aluminum Casing and
Fixed Clear Glass Transom on 50 x 100 mm
6.36 Wooden Jamb complete with Accessories
D-1, Panel Door 0.90m x 2.10m on 150mm set 5,757.50 887.63 0.00
6.03 Wooden Jamb complete with Accessories
6.02 Removal of Window with Jamb sq.m 0.00 24.16 0.00
Sub-total
J Painting Works
Concrete surfaces sq.m
 13.18 Neutralizer gal 132.00 39.60 0.00
13.01 Latex, Flat gal 425.00 127.20 0.00
13.02 Latex, Semi Gloss gal 513.87 147.75 0.00
13.20 Acri Color qrt 165.00 49.50 0.00
Roofing and Accessories sq.m
13.10 Primer, Red Oxide gal 505.04 146.10 0.00
13.13 Gloss Acrylic Roof Paint gal 535.00 154.50 0.00
13.16 Paint Thinner gal 260.00 78.00 0.00
Doors and Windows sq.m
13.04 Enamel, Flatwall gal 470.00 144.90 0.00
13.05 Enamel, Semi Gloss gal 500.00 149.10 0.00
13.16 Paint Thinner gal 260.00 78.00 0.00
Sub-total

I. DIRECT COST
II. INDIRECT COST 21% of (I)
III. TAX 12% of (I+II)
IV. TOTAL CONSTRUCTION COST (I+II+III)
Prepared by:

Engr. JESUSEÑO D. MADRID

Proprietor / Manager
J. D. Madrid Construction
 F-1 7.00 0.80 0.80 0.25
F-2 4.00 1.00 1.00 0.25
F-3 2.00 0.90 0.90 0.25

WF-1 1.00 0.25 0.40 57.00

C-1 9.00 0.16 0.40 4.18

C-2 4.00 0.16 0.40 4.18

RG-1 8.00 0.15 0.40 4.50

RG-2 6.00 0.15 0.40 3.50
EB-1 6.00 0.15 0.25 4.50

S-1 2.00 8.50 9.00 0.10

F-1 1.58 7.00 8.00 1.05

F-2 1.58 4.00 8.00 1.25
F-3 1.58 2.00 8.00 1.15

WF-1 0.62 1.00 190.00 0.45

WF-1 0.62 1.00 31.00 6.00

C-1 1.58 9.00 4.00 4.43

C-1 0.62 9.00 39.00 0.95
C-2 1.58 4.00 6.00 4.43
C-2 0.62 4.00 39.00 0.95
C-2 0.62 4.00 39.00 0.23

RG-1 1.58 8.00 4.00 4.50

RG-1 0.62 8.00 32.00 0.93
RG-2 1.58 6.00 4.00 3.50
RG-2 0.62 6.00 27.00 0.93
EB-1 0.62 6.00 4.00 4.50
 EB-1 0.62 6.00 32.00 0.63

C-1 9.00 0.16 0.40 4.18

C-2 4.00 0.16 0.40 4.18

RG-1 8.00 0.15 0.40 4.50

RG-2 6.00 0.15 0.40 3.50
EB-1 6.00 0.15 0.25 4.50

SIDES 3.00 7.00 3.38 70.88

FRONT/REAR 4.00 9.00 3.38 121.50
PARA 3.00 6.00 0.70 12.60
MINUS -4.00 2.10 1.00 -8.40
MINUS -4.00 2.60 1.60 -16.64
MINUS -4.00 1.30 1.60 -8.32
MINUS -4.00 0.60 0.60 -1.44
170.18
st within the set time frame”

BUILDING

TOTAL COST
GRAND TOTAL
LABOR

0.00 0.00
0.00 0.00

0.00 0.00
0.00 0.00
0.00 0.00

0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00

0.00 0.00
0.00 0.00
0.00 0.00

0.00 0.00
0.00 0.00
0.00 0.00

0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00

0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00

0.00 0.00
0.00 0.00
0.00 0.00

0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00

0.00 0.00

0.00 0.00

0.00 0.00
0.00 0.00
0.00 0.00

0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00

0.00 0.00

0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00

0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00

0.00 0.00

0.00 0.00

0.00 0.00

0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00

0.00 0.00
0.00 0.00
0.00 0.00

0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00

0.00 0.00
0.00
0.00
0.00
Per Square 0.00
Concrete Excavation Gravel Bedding
1.12 1.20 5.38 0.22
1.00 1.20 4.80 0.20
0.41 1.20 1.94 0.08
2.53 12.12 0.51

5.70 0.60 13.68 1.14

5.70 13.68 1.14

2.40
1.07
3.47

2.16
1.26
1.01
4.43

15.30
15.30

Rebars
92.85
63.16
29.05
185.06

52.67
114.58
167.24

251.53
205.41
167.69
91.29
22.10
738.02

227.38
146.66
132.64
92.81
66.53
 74.51
740.52
Forms
42.08
18.70
60.79

34.20
19.95
17.55
71.70
Masonry
concrete works eql part length width height area
F-1 14 1 1 0.3 14
column 14 0.35 0.35 5.6 1.715
SECOND FLOOR COLUMN 0 0.35 0.35 3 0
3RD FLOOR COLUMN 0 0.25 0.25 1 0
ROOF DECK FLOOR COLUMN 0 0.25 0.25 2 0
tie beam 1 69 0.2 0.25 13.8
beam 1 0 294 0.2 0.25 0
beam 2 0 15 0.3 0.35 0
ROOF BEAM 1 71 0.2 0.25 14.2

stiffener column
wall footing 1 53 0.4 0.15 21.2
slab on fill 1 10 9 0.1 90
porch 1 1.5 3.5 0.15 5.25
suspended slab 0 8.5 22 0.125 0
for porch cover 0 2.5 4.5 0.125 0
ROOF DECK 0 6 22 0.125 0
for porch cover 2.5 4.5 0.125 0
total 116.45

Masonry Works eql part opening length hight area

wall footing wall 1
exterior wall 1 38 3.7 140.6
exterior wall 2ND 1 0 3 0
exterior wall ROOF DECK 1 0 1 0
interior walls 1 32.5 3.7 120.25
interior walls 2nd 1 33.4 3 100.2
interior walls
parapet total 99.48 6 705
total 0.6
filler vol/hole
4" 0.005 180
5" 0.00544 0
parapet 4" 0.005
MORTAR layer
4" 0.002 30
5" 0.0025 0
parapet 4" 0.002 30
total
Form Works eql part perimeter height area No. pcs. of plywood
column 14 1.6 5.6 125.44 44
2ND FLOOR COLUMN 0 1.6 3 0 0
3RD FLOOR COLUMN 0 1.2 1 0 0
ROOF DECK 0 1.2 2 0 0
tie beam 1 0.8 69 55.2 20
roof beam 1 0.8 71 56.8 20
beam1 0 0.8 294 0 0
beam 2 0 1.1 15 0 0
suspended slab 0 0
Scafoldings
column
tie beam
roof beam
stiffener beam
stiffener column
suspended slab
TOTAL 16 9.1 460.6 237.44 84
Reinfocement bar works eql parts length height 10mm 12mm
f-1 14 16

eql parts no. of pcs. height length 10mm

column 14 8.00 5.75

lat ties 14 38.93 1.5 136.25
column 2ND 0 8.00 1.15
lat ties 0 6.07 1.4 0
column 3RD 0 4.00 0.4
lat ties 0 0.71 1 0
column ROOF DECK 0 8.00 0.5
lat ties 0 1.43 60 0
136.25

tie beam 1 6.00 69

lat ties 1 492.86 82.1428571
beam1 0 8.00 294
lat ties 0 2,100.00 0
beam2 0 6.00 15
lat ties 0 107.14 0
ROOF BEAM 1 6.00 71
lat ties 1 507.14 84.5238095
stiffener column
lat ties
wall footing 1 3.00 53
lat ties 1 212.00 0.3 63.6
 vert. length hor. length spacing

slab on fill 10 16.666666667 9.00 15 0.6

porch 1.5 2.5 3.5 5.833333 0.6

area 12mm tie wire

suspended slab 0 0 0
for porch cover 0 0 0

area 12mm tie wire

ROOF DECK 0 0 0
for porch cover 0 0 0

area vert/sq.m. hor. / sq.m. 12mm tie wire

exterior & interior wall 250 732.5 537.5 1270 15.75

parapet 0 0 0 0
volume
4.2
9.604 5.6 5.4
0
0
0
3.45 69 15 11 14.8 12.7
0 186 108 294 14 14 8.7 8.7
0 3.7 5 10 37.4
3.55 71

3.18 53 56 23.5
9 128
0.7875 9.7875
0 0
0
0 0
0
12.9675
54.4
volume 44 3.6

38 3.9 48.4 4.2

area
32.5 d-1 1 2.1 2.1 20
d-2 0.8 2.1 1.68 10
26.5 d-3 0.7 2.1 1.47 4
605.52 d-4 4

volume w-1 2 1.2 2.4 10

0.9 w-2 1.5 1.2 1.8 1
0 w-3 1 0.6 0.6 10
0 w-4 0.6 0.5 0.3 10
volume w-5 2
0.36 w-6 4
0 w-7 1
0 w-8 1
1.26 cu.m.
No. pcs. of plywood No. of Bd.ft
44 1305.48
0 0
0 0
0 0
20 593.4
20 593.4
0 0
0 0
0 0

84 2492.28 132
16mm tie wire 396
37.33333 7128000
16mm tie wire
12mm

107.333333333333

- 107.33

69

71

159
 12mm 16mm
10mm tie wire

5.277778
1.388889

58
26.5
84.5
312.65
 22 30.5
18.5
38

12.7 12.7 12.7 10 14 115.6

14 13 11 5.6 8 11 8 3 15 268

24

42
16.8
5.88
0

24
1.8
6
3
0 23.5 3 70.5
0 705
0
0
99.48
Subject: Detailed Estimate
Owner: GERALD COLOMA
Project Title: 3-BEDROOM RESIDENTIAL HOUSE
Location: NANGALISAN, BACNOTAN, LA UNION

Materials Unit
QTY Unit Unit Cost
Cost
Earth Work:
Excavation 2.56 cu.m. 220.00 563.20
Backfilling 4.00 cu.m. 300.00 1,200.00
P 1,763.20
Concrete Work
Footings 0.256 cu.m.
►Portland Cement 2.30 bags. 230.00 529.92
►Sand 0.13 cu.m. 600.00 76.80
►Crushed Gravel 0.26 cu.m. 500.00 128.00
►12mm Dia. Renforced bar 4.00 pcs. 150.00 600.00
►No. 16 G.I. Tie Wire 10.00 kls. 100.00 1,000.00
P 2,334.72

Column 0.384 cu.m.

►Portland Cement 3.46 bags. 230.00 794.88
►Sand 0.19 cu.m. 600.00 115.20
►Crushed Gravel 0.38 cu.m. 500.00 192.00
►12mm Dia. Renforced bar 16.00 pcs. 150.00 2,400.00
►10mm Dia. Renforced bar 50.00 pcs. 105.00 5,250.00
►No. 16 G.I. Tie Wire 20.00 kls. 100.00 2,000.00
P 10,752.08

Tie Beam 1.10 cu.m.

►Portland Cement 9.90 bags. 235.00 2,326.50
►Sand 0.55 cu.m. 600.00 330.00
►Crushed Gravel 1.10 cu.m. 500.00 550.00
►12mm Dia. Renforced bar 50.00 pcs. 150.00 7,500.00
►10mm Dia. Renforced bar 60.00 pcs. 105.00 6,300.00
►No. 16 G.I. Tie Wire 20.00 kls. 100.00 2,000.00
P 19,006.50
Roof Beam 1.1 cu.m.
►Portland Cement 9.90 bags. 235.00 2,326.50
►Sand 0.55 cu.m. 600.00 330.00
►Crushed Gravel 1.10 cu.m. 500.00 550.00
►12mm Dia. Renforced bar 60.00 pcs. 150.00 9,000.00
►10mm Dia. Renforced bar 20.00 cu.m. 105.00 2,100.00
►No. 16 G.I. Tie Wire 10.00 kls. 100.00 1,000.00
P 15,306.50

Wall Footing 1 cu.m.

►Portland Cement 9.00 bags. 230.00 2,070.00
►Sand 0.50 cu.m. 600.00 300.00
►Crushed Gravel 1.00 cu.m. 500.00 500.00
►12mm Dia. Renforced bar 12.00 pcs. 150.00 1,800.00
►10mm Dia. Renforced bar 29.00 pcs. 105.00 3,045.00
►No. 16 G.I. Tie Wire 15.00 kls. 100.00 1,500.00
P 9,215.00

Slab on Fill 3 cu.m.

►Portland Cement 27.00 bags 230.00 6,210.00
►Sand 1.50 cu.m. 600.00 900.00
►Crushed Gravel 3.00 cu.m. 500.00 1,500.00
►10mm Dia. Renforced bar 20.00 pcs. 105.00 2,100.00
►No. 16 G.I. Tie Wire 20.00 kls. 100.00 2,000.00
P 12,710.00
Masonry Works
for interior and exterior wall
►4" CHB 660.00 pcs. 10.00 6,600.00
►5" CHB 0.00 pcs. 11.00 0.00
►12mm Dia. Renforced bar 32.00 pcs. 150.00 4,800.00
►No. 16 G.I. Tie Wire 50.00 kls. 80.00 4,000.00
►Portland Cement 10.00 bags. 230.00 2,300.00
►Sand 0.63 cu.m. 550.00 346.50
Plaster finish 2 sq.m.
►Portland Cement 0.90 bags. 230.00 207.00
►Sand 0.05 cu.m. 550.00 27.50
P 18,281.00

Paint finish 44.00 sq.m.

►Latex Paint 1.76 gal 650.00 1,144.00
►Thinting color 0.88 gal 650.00 572.00
►Masonry Putty 1.47 gal 350.00 513.33
►Putty knife 6.00 pcs. 20.00 120.00
►Sand Paper 10.00 pcs. 10.00 100.00
►Roller Brush 3.00 pcs. 100.00 300.00
►Paint Brush 2" 3.00 pcs. 50.00 150.00
►Paint Brush 3" 3.00 pcs. 55.00 165.00
►Roller pan 3.00 pcs. 70.00 210.00
P 3,274.33

Form Works & Scafolding

column
►1/4" Plywood 5.00 pcs 600.00 3,000.00
►2" x 2" lumber 200.00 bd.ft. 48.00 9,600.00
►Assorted Nail 20.00 kls. 50.00 1,000.00
P 13,600.00
Beams
►1/4" Plywood 5.00 pcs 600.00 3,000.00
►2" x 2" lumber 200.00 bd.ft. 48.00 9,600.00
►Assorted Nail 20.00 kls. 50.00 1,000.00
P 13,600.00
Doors & Windows

Door
►LAM Sum 1.00 lot 5,000.00 5,000.00

Window
►LAM sum 1.00 lot 10,000.00 10,000.00
P 15,000.00
Electrical Work
Lam sum 1.00 set. 20,000.00 20,000.00
P 20,000.00

Plumbing work
Lam sum 0.00 set. 15,000.00 0.00
P -
OTHER
Lam sum (TILE WORKS AND OTHER 1.00 set. 25,000.00 25,000.00
MOLDED DESIGN)
P 25,000.00

Conforme:

GERALD COLOMA
Owner

Checked By:

_________________________________
Civil Engineer
cement
sand
gravel

5.12 0.64
2.56

#REF!

91 0.064
0.256

0.096
16 0.384

64

8 12 96

22
1.1

12
 30
3

P 21,555.33

13

22
16 52.8 660
8
8
32

P 27,200.00
Subject: Summary
Owner: MR. ADELLO NOVICIO
Project
2-STOREY RESIDENTIAL / COMMERCIAL BUILDING
Title:
Location: NANGALISAN, BACNOTAN, LA UNION

Description Material Cost Labor Cost Total

I Earth Work:
Excavation
1,763.20 705.28 2,468.48
Backfilling

II Concrete Work
Footings
Column
Tie Beam 69,324.80 27,729.92 97,054.72
Roof Beam
Wall Footing
Slab on Fill

III Masonry Works

for interior and exterior wall 21,555.33 8,622.13 30,177.47
Plaster finish
Paint finish
IV Form Works & Scafolding
column
Tie Beam 27,200.00 10,880.00 38,080.00
Roof Beam
suspended slab
by Contract
V Doors & Windows 15,000.00 15,000.00
term
VI Electrical Work 20,000.00 by Contract 20,000.00
term
VII Plumbing work - by Contract -
term
by Contract
VIII OTHER 25,000.00 term 25,000.00
by Contract
XI ROOFING WORKS 20,000.00 term 20,000.00
GRAND TOTAL Php 247,780.67
0
 S P E C I F I C A T I O N
I SITE WORKS

A. WORK INCLUDED
1 Staking ouut of building, establishment of lines, grade and benchmark

2 All excavations including all necessary shoring, bracings and drainageof storm water from site

3 All fills and grade, removal of excess materials from site.

4 Protection of property, work and structures, workmen and other people fromdamage and injury.

B LINES, GRADE AND BENCHMARKS

1 Stake out accurate the lines of the building and other structures.

2 Erect basic reference marks at such point where they will not be disturbed during the construction of the
foundation.

C. EXCAVTION

Excavation shall be to the depths indicate in the drawing. Excavation works shall be field withconcrete; the
1
bottom of which shall be leveled. All excavation work shall be inspected before concrete pouring is done.

D BACKFILLING

1 Backfilling works shall be done after all forms are removed from foundation.

E PLACING AND COMPACTING OF FILLS

1 Before placing filling materials, the surface upon which it will be placed shall be cleared from brush roots,
vegetable matter and debris and thoroughly wetted to insure good bonding with the ground.

F DISPOSAL OF SURPLUS MATERIALS

Any excess materials after earthworks are complated shall be disposal off by hauling and spreading in
1
nearby spoil areas designated by the owner.

II CONCRETE WORKS

A GENERAL

1 Unless otherwise specified herein, concrete works shall conform to the ACI Code Specification and Provision.

B MATERIALS

1 Cement for concrete shall conform to the requirement of specifications for Portland cement ( ASTM C150 ).

Water used in mixing cocnrete shall be clean and free from injurious amount of oil, alkaline, organic
2
materials and other substances that may couse damage to concrete and steel.

3 Fine aggregates shall consist of hard, tough, durable and uncoated particles.

Course aggregates shall consist of gravel, crushed gravel or rock, or a combination of gravel and rock; shall
4 be hard, durable and clean uncoated particles.

Reinforcing bars for concrete shall conform to the requirements of ASTHO Standard Specification for billet
5
steel bars.

C. PROPORTION AND MIXING

1 Proportion for concrete materials shall be as follows:

1.a. Class A (1:2:3) Concrete mix for all structural member such as columns, beams, and foundation.

2.b. Class B (1:2:4) for masonry fills and slab-on-ground.

D FORMWORKS
1 GENERAL

Forms shall be used whereever necessary to confine the concrete shape; and to avoid contamination of
concrete from materials caving from adjacent excavated surface.

2 REMOVAL OF FORMS
 Form shall be provided in a manner by wich concrete shall not be damage. Forms shall be removed any
upon proper curing of concrete is done or upon approval of the Engineer.

E PLACING OF REINFORCEMENT
1 GENERAL

Steel reinforcement shall be provide as indicate in plan; together with all necessary tie wich wires, spacing
and other devices necessary to install and secure the reinforcements.

F CONVEYING AND PLACING OF CONCRETE

1 CONVEYING
Concrete shall be conveyed from the mixer to the forms as rapidly as possible to avoid segregation of the
concrete mix.
2 TIME INTERVAL BETWEEN MIXING AND PLACING
Concrete shall be placed before the initial set has occurred and it has contained its water content for not
more than 45 minutes.
3 CURING
All concrete shall be moist, and cured for a period of not less than seven days,approved method or
combination of applicable method to obtain proper curing.

III MASONRY WORKS

A. MATERIALS
1 Concrete hollow blocks shall be 4" x 8" x 16" for walls.
2 Wall reinforcement shall be 10mm diameter deformed bars.
3 MORTAR
3.1. Mix mortar from 3 to 5 minutes in such quantities as in need for immediate use.
4 PROPORTION
4.1 Mortar mix shall be 1:2 proportioning.

B. ERECTION

1 All masonry shall be laid plumbed. Do not lay hollow blocks which have cracks, broken or defaced ones.

IV CARPENTRY WORKS

A. MATERIALS

Lumber shall be red tanguile, well-seasoned, throughly dry and free from large, loose or unsound knots,
1
sups, shakes and other imperfections impairing strength, durability and apperance.

2 Wood surface in contact with masonry and concrete shall be coated with creosete or its equivalent.

3 All door sashes shall be well-seasoned, flushed type and solid.

B. WORKMANSHIP
Eexecute rough carpentry in beest workmanlike manner. Erect framing plumbed to lines, levels and
1
dimensions, squared, aligned, well-spliced and nailed.

V ARCHITECTURAL WORKS

A. FLOORING
1 All interior floor shall be finished with 16" x 16" ceramic floor tiles.

B. CEILING
1 All interior ceiling shall be 1/4" x 4' x 8' gypsum board laid to metal furring.
2 All exterior ceiling shall be pre-painted spandrel.

C. WALLS
1 All interior and exterior walls shall be painted with latex paint.

D. DOORS
1 Door shall be as per indicate in the detaild drawings.

E. WINDOWS
1 All windows shall be Aluminum coated window with provision of exit access for every bedroom.

VI ROOFING AND TNSMITHRY WORKS

A. MATERIALS
1 Roofing materials shall be RIB type long span, pre-painted.
 2 2" x 2" x1/4" angle bar for all trusses and web members
3 2" x 3" c-purlins for purlins space @ 0.6 m.

VII PLUMBING WORKS

A. GENERAL
All works shall be done in accordance with the specification and methods as described by the National
1
Plumbing Code of the Philippines.

B. MATERIALS
1 Used PVC pipe for all drainage and sewer lines.
2 Use 1/2" diameter G.I. pipes and fittings for all water lines at schedule 40.
3 Floor drain shall be of high grade, tough and even grained with adjustable with manufacturer.

C. INSTALLATION
1 Install plumbing fixture free and open to allow easy access for cleaning.

2 Install all fixture and accessories in location directed in accordance with manufacturer's instructions.

3 All PVC soil and drainage pipes shall have a minimum slope of 1%.

4 Make all joints water tight. Use plastic cement for PVC pipes al Teflon tape for G.I. pipes.

VIII ELECTRICAL WORKS

A. GENERAL

The work shall consit of furnishing of all labor and materials. Tools and equipments and necessary services
1
to complete the electrical works ready for operation as shown in drawings.

2 Supply and installationof electrical panel boards, pull boxes and other accessorie as required.

B. CODES AND REGULATION

1 GENERAL
The Electrical works shall be done in accordance with the requirements of the latest issue of the National
Electrical Code of the Philippines and ordinance of the local enforcing authorities, and of the local power
company.

C. TECHNICAL SPECIFICATIONS
1 Power sercices shall be 230 V, single phase 2 wire solid, 60 hertz.
2 All electrical wires shall be enclosed in PVC conduits.
3 Panel boards shall be installed in accordance with the drawings.
4 RECEPTACLES AND OUTLET
a. Provide switches and receptacles with proper cover plates.

b. Receptacles shall be duplex with proper cover plates , rated 10 A min. 250 VAC or approved equivalent.

c. Lighting outlets at ceiling shall be provided with 4" PVC utility boxes.

Conforme:
VIRGINIA CORPUZ
Owner
 S P E C I F I C A T I O N
I SITE WORKS

A. WORK INCLUDED

1 Staking out of building, establishment of lines, grade and benchmark

2 All excavations including all necessary shoring, bracings and drainage of storm water from site

3 All fills and grade, removal of excess materials from site.

4 Protection of property, work and structures, workmen and other people from damage and injury.

B LINES, GRADE AND BENCHMARKS

1 Stake out accurate the lines of the building and other structures.
Erect basic reference marks at such point where they will not be disturbed during the construction
2
of the foundation.

C EXCAVTION

Excavation shall be to the depths indicate in the drawing. Excavation works shall be field with
1 concrete; the bottom of which shall be leveled. All excavation work shall be inspected before
concrete pouring is done.

D BACKFILLING

1 Backfilling works shall be done after all forms are removed from foundation.

E PLACING AND COMPACTING OF FILLS

Before placing filling materials, the surface upon which it will be placed shall be cleared from brush
1 roots, vegetable matter and debris and thoroughly wetted to insure good bonding with the
ground.

F DISPOSAL OF SURPLUS MATERIALS

Any excess materials after earthworks are completed shall be disposal off by hauling and spreading
1
in nearby spoil areas designated by the owner.

II CONCRETE WORKS

A GENERAL

1 Unless otherwise specified herein, concrete works shall conform to the ACI Code Specification and
Provision.

B MATERIALS

Cement for concrete shall conform to the requirement of specifications for Portland cement
1
( ASTM C150 ).
 2 Water used in mixing concrete shall be clean and free from injurious amount of oil, alkaline,
organic materials and other substances that may course damage to concrete and steel.

3 Fine aggregates shall consist of hard, tough, durable and uncoated particles.

Course aggregates shall consist of gravel, crushed gravel or rock, or a combination of gravel and
4
rock; shall be hard, durable and clean uncoated particles.

Reinforcing bars for concrete shall conform to the requirements of ASTHO Standard Specification
5
for billet steel bars.

C. PROPORTION AND MIXING

1 Proportion for concrete materials shall be as follow:

1.a. Class A (1:2:3) Concrete mix for all structural member such as columns, beams, and
foundation.

2.b. Class B (1:2:4) for masonry fills and slab-on-ground.

D FORMWORKS

1 GENERAL

Forms shall be used wherever necessary to confine the concrete shape; and to avoid
contamination of concrete from materials caving from adjacent excavated surface.

2 REMOVAL OF FORMS

Form shall be provided in a manner by which concrete shall not be damage. Forms shall be
removed any upon proper curing of concrete is done or upon approval of the Engineer.

E PLACING OF REINFORCEMENT
1 GENERAL

Steel reinforcement shall be provide as indicate in plan; together with all necessary tie which
wires, spacing and other devices necessary to install and secure the reinforcements.

F CONVEYING AND PLACING OF CONCRETE

1 CONVEYING

Concrete shall be conveyed from the mixer to the forms as rapidly as possible to avoid segregation
of the concrete mix.

2 TIME INTERVAL BETWEEN MIXING AND PLACING

Concrete shall be placed before the initial set has occurred and it has contained its water content
for not more than 45 minutes.

3 CURING
 All concrete shall be moist, and cured for a period of not less than seven days, approved method
or combination of applicable method to obtain proper curing.

III MASONRY WORKS

A. MATERIALS

1 Concrete hollow blocks shall be 4" x 8" x 16" for walls.

2 Wall reinforcement shall be 10mm diameter deformed bars.

3 MORTAR
3.1. Mix mortar from 3 to 5 minutes in such quantities as in need for immediate use.
4 PROPORTION
4.1 Mortar mix shall be 1:2 proportioning.

B. ERECTION

All masonry shall be laid plumbed. Do not lay hollow blocks which have cracks, broken or defaced
1
ones.

IV CARPENTRY WORKS

A. MATERIALS

Lumber shall be red tanguile, well-seasoned, thoroughly dry and free from large, loose or unsound
1
knots, sups, shakes and other imperfections impairing strength, durability and appearance.

2 Wood surface in contact with masonry and concrete shall be coated with creosote or its
equivalent.

3 All door sashes shall be well-seasoned, flushed type and solid.

B. WORKMANSHIP

1 Execute rough carpentry in best workmanlike manner. Erect framing plumbed to lines, levels and
dimensions, squared, aligned, well-spliced and nailed.

V ARCHITECTURAL WORKS

A. FLOORING
1 All interior floor shall be finished with 60" x 60" ceramic floor tiles.

B. CEILING
1 All interior ceiling shall be 1/4" x 4' x 8' gypsum board laid to metal furring.
 2 All exterior ceiling shall be pre-painted spandrel.

C. WALLS
1 All interior and exterior walls shall be painted with latex paint.

D. DOORS
1 Door shall be as per indicate in the detailed drawings.
E. WINDOWS
1 All windows shall Aluminum sliding Window, and the design indicate in daetailed drawing.

VI PLUMBING WORKS

A. GENERAL

All works shall be done in accordance with the specification and methods as described by the
1
National Plumbing Code of the Philippines.

B. MATERIALS

1 Used PVC pipe for all drainage and sewer lines.

2 Use 1/2" diameter G.I. pipes and fittings for all water lines at schedule 40.

3 Floor drain shall be of high grade, tough and even grained with adjustable with manufacturer.

C. INSTALLATION

1 Install plumbing fixture free and open to allow easy access for cleaning.

2 Install all fixture and accessories in location directed in accordance with manufacturer's
instructions.
3 All PVC soil and drainage pipes shall have a minimum slope of 1%.

4 Make all joints water tight. Use plastic cement for PVC pipes al Teflon tape for G.I. pipes.

VII ELECTRICAL WORKS

A. GENERAL

The work shall consist of furnishing of all labor and materials. Tools and equipments and necessary
1
services to complete the electrical works ready for operation as shown in drawings.

2 Supply and installation of electrical panel boards, pull boxes and other accessories as required.

B. CODES AND REGULATION

 1 GENERAL

The Electrical works shall be done in accordance with the requirements of the latest issue of the
National Electrical Code of the Philippines and ordinance of the local enforcing authorities, and of
the local power company.

C. TECHNICAL SPECIFICATIONS

1 Power services shall be 230 V, single phase 2 wire solid, 60 hertz.

2 All electrical wires shall be enclosed in PVC conduits.

3 Panel boards shall be installed in accordance with the drawings.

4 RECEPTACLES AND OUTLET

a. Provide switches and receptacles with proper cover plates.

b. Receptacles shall be duplex with proper cover plates , rated 10 A min. 250 VAC or approved
equivalent.

c. Lighting outlets at ceiling shall be provided with 4" PVC utility boxes.

Conforme:

Sps. Efren and Rosario Badua

Owner

Checked By:

_________________________________
Civil Engineer