Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
88 views

1 Design Calculation Cover Access

The document provides design calculations for horizontal members and connection anchors for a proposed condominium development comprising 12 blocks of 11-13 storey buildings. For the horizontal members, calculations are shown for load, moment, shear and deflection of a 1.8m span beam using a 150x100x9mm SHS profile. Connection anchor bolt calculations are also provided using 4 M20 Hilti anchors to resist the 9.44kNm moment and 20.805kN shear at the connection. Weld calculations are included to check the connection welding can resist the 20.8kN applied force.

Uploaded by

Agus Sudiana
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
88 views

1 Design Calculation Cover Access

The document provides design calculations for horizontal members and connection anchors for a proposed condominium development comprising 12 blocks of 11-13 storey buildings. For the horizontal members, calculations are shown for load, moment, shear and deflection of a 1.8m span beam using a 150x100x9mm SHS profile. Connection anchor bolt calculations are also provided using 4 M20 Hilti anchors to resist the 9.44kNm moment and 20.805kN shear at the connection. Weld calculations are included to check the connection welding can resist the 20.8kN applied force.

Uploaded by

Agus Sudiana
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Project title : PROPOSED CONDOMINIUM HOUSING 04/05/2023

DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY

1 DESIGN CALCULATION COVER ACCESS

1a DESIGN OF HORIZONTAL MEMBER

Due Live Load

A 20.11 kN/m B

1.8 m

0.3 m
6.75 kN/m
A B

1.8 m

Span = 1.8 m
Loaded width = 1.125 m
Live Load = 5 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 65mm thk = 1.625 kN/m2
Wheel Load = 6.75 kN
Factored Load = 11.38125 kN/m2
Udl 1 = 12.80 kN/m
Udl 2 = 10.13 kN/m

Page 1 of 5
Project title : PROPOSED CONDOMINIUM HOUSING 04/05/2023
DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY

Moment max 1, MEd = 5.19 kNm


Shear max 1 = 11.52 kN

Moment max 2, MEd = 4.25 kNm


Shear max 2 = 9.28 kN

Total moment = 9.44 kNm


Total Shear = 20.80 kN

Using Py Steel = 275 N/mm2

Required Sx = M/Py = 34.325 cm3

USE PROFILE 150X100X9mm-SHS


A = 39.67 cm2
D = 150 mm
t(w) = 10 mm
B = 100 mm
Zx = 150.5 cm3
ry = 3.87 cm
rX = 5.33 cm
T(f) = 10 mm
E = 210000 N/mm2
Ix = 1129 cm4
fy = 275 N/mm2

Shear Capacity
VPL, Rd = AV (fy/√3)γM0
AV = 2967 mm2

VPL, Rd = 471.07 kN > 20.80 kN OK

Bending capacity of section


MPL,Rd = WPL,yfy/γMo
= 41.388 kNm > 9.439 kNm OK

Check for deflection Under Service Load

Service Live Load Deflection in the beam


D = 5wl4/384EI = 0.079 mm
Permissible deflection

L/250 = 7.200 mm OK

Page 2 of 5
Project title : PROPOSED CONDOMINIUM HOUSING 04/05/2023
DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY

DESIGN OF CONNECTION ANCHOR BOLTS

USE 4M20 HILTI ANCHOR HIT C 5.8


Moment at the connection = 9.439 kN-m
Shear at connection = 20.805 kN
Nos of tension bolts = 2 Nos
Nos of shear bolts = 2 Nos

Section width = 30 mm
spacing bolts = 190 mm
Actual tensions on bolts, Ft,Sd = 24.841 kN

Tension capacity of bolts, F t,Rd = 38.0 kN OK

Direct shear per bolt, Fv,Sd = 10.402 kN

shear resistance of anchor bolt, F v,Rd = 35 kN OK

Fv,Sd/Fv,Rd + Ft,Sd/1.4Ft,Rd < 1 = 0.764 <  1 OK

Check for Base Plate


Moment at base plate = 1.987 kN-m
Yeild strength of Mild steel = 275 N/mm2
Plate width = 25 cm

Required Elastic Modulus


M/py = 7.226 cm3

Use thickness of plate 14mm = 1.4 cm


Zx = bd /6 2
= 8.167 cm3 OK

Page 3 of 5
Project title : PROPOSED CONDOMINIUM HOUSING 04/05/2023
DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY

Check Connection welding

applied force = 20.80 kN


length of weld = 60.00 mm
Ultimate tensile strength of S275 steel, f u = 430.00 N/mm2
Correlation factor, βw = 0.85
Throat thickness of weld, ɑ = 6.00 mm
Effective length of weld, l-2ɑ = 48.00 mm
Partial safety factor for weld, ɼM2 = 1.25 N/mm2
Design resistance of weld, F w,RD = fvw,dɑ
fvw,d = (fu/√3)/(βwɼM2)
fvw,d = 233.66 N/mm2
Fw,RD = 1401.9 N/mm
Vw,RD = 67.29 kN OK

Page 4 of 5
Project title : PROPOSED CONDOMINIUM HOUSING 04/05/2023
DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY

Page 5 of 5

You might also like